Used Sheet Cleaning Machines for sale (68,631)

Condition: used, B 60 W BP DOSE (ROLLER) Ride-on Scrubber-Suction Machine The B 60 W Bp Dose ride-on scrubber-suction machine is equipped with a drive system, a maintenance-free 120 Ah battery (2 units), and a user-friendly key system. This system enables simple and safe operation by regulating access and operating rights to protect against incorrect use. The machine is ideally suited for cleaning textured floors and can cover areas of up to 2,500 square meters. The brushes can be quickly and easily installed and replaced. Thanks to the eco!efficiency mode, the battery life is significantly extended, and the integrated tank flushing system makes it easier to clean the dirty water tank after floor cleaning. - Ride-on scrubber-suction machine (60 l) with drive system. - Ideal for 1000 - 2500 m². - Energy-saving eco!efficiency mode. Proven dual-disc technology ■ Brush heads can be quickly installed and replaced. Powerful drive system ■ Comfortable driving with stepless speed adjustment (forward and reverse). ■ Pre-settable maximum speed. ■ Operation via drive levers directly on the handle. With Dose detergent dosing system. ■ With on-board detergent dosing. ■ Precise and even dosing (adjustable up to 3%). ■ No contamination of the tank, as it is only filled with fresh water. Bsdpfxjx Hvvzo Aqvoww Technical data Power supply V / Hz 100 – 240 / 50 – 60 Working width, suction mm 850 Tank, fresh/dirty water l 60 / 60 Brush speed rpm 600 – 1300 Brush pressure kg 37 Battery Ah 120 Battery type maintenance-free Battery charging time h 4.7 Sound pressure level dB(A) 71 Water consumption l/min 3.6 Drive type battery Drive drive motor Mains connection, charger V / Hz 100 – 240 / 50 – 60 Dimensions (L × W × H) mm 1520 × 748 × 1160 Item condition: used, the pictures may differ, as the item is available in multiple units. Quantity: 1x Kärcher ride-on scrubber-suction machine B 60 W Bp Dose General signs of wear include all damage that can be expected due to age and operating hours. You can find more cleaning machines - new and used - in our shop! International shipping costs on request!

Year of construction: 2024, condition: ready for operation (used), Nominal output: 9500 bottles/h (based on 0.5 litre NRW bottle, 68x260mm, 370g), mechanical control range: 3800-10,450 bottles/h, cycle time: 9.47s, total bottle cells: 3375, filled: 3175, per row: 135 basket rows, cell pitch: 95mm, chain pitch: 140mm, drive lanes: 3 lanes, discharge lanes: 3 lanes. Total throughput time: 21.32min, total immersion time: 7.24min, caustic immersion time: 5.34min, caustic filling time: 7.05 min, caustic contact time: 9.91min, total rinse time: 123s, total spray time: 47s, water consumption: 2.61m³/h, 275 ml/bottle, heat consumption (operation): 721. 715 kJ/h = 172,247 kcal/h, 75.97 kJ/bottle = 18.1 kcal/bottle, heat consumption (heating): 2,880 MJ = 687,467 kcal, total installed power: 27.2kW, pump power: 20.4kW, drives: 5.7kW, compressed air consumption (at 6bar): 0.2m³/h, dimensions housing: 7162x2740x2500mm. Overall dimensions: 7162x3540x2730mm, minimum access opening (W x H): 3840x2000mm, minimum ground clearance: 75 ± 25mm, height of infeed/outfeed: 645/1165mm, empty weight: 11,680kg, operating weight: 31,563kg, floor load: 8690kg/m², load per spherical base: 2130kg, number of spherical bases: 12. The machine has been running for approx. 6 months, so it is almost as good as new, including documentation. An on-site inspection is possible. Bwodjwb E S Ispfx Aqvew

Condition: used, RSA NC-V 2000 Deburring Machine + Tube Washing System + Coral Filter Complete industrial tube processing and finishing line Bodpozklb Eofx Aqveww The system consists of three high-quality industrial components: 1. RSA RASAPLAN NC-V 2000 – High-performance deburring machine Function: Automatically processes workpieces up to a maximum length of 2,000 mm. 2. BOUS (CeBeCo) Rowamat RL 200 – Continuous tube washing system Function: Extremely robust and durable stainless steel welded construction. Accessories: 3. CORAL IperJet DF4 – Cartridge filter extraction system Performance: 4 horizontal high-performance filter cartridges with fully automatic jet-pulse compressed air cleaning (very low maintenance). Function: Reliably extracts brush dust, grinding residue, or fumes from the washing system. The RSA Rasaplan NC-V2000 is a fully automatic, high-performance brush deburring machine specifically designed for the simultaneous internal and external deburring of tube ends and profiles in an industrial continuous process. The number "2000" indicates the maximum workpiece length of 2000 mm, which can be automatically processed in the standard configuration. “Everything from a single source: We would be happy to offer you suitable bank financing for your project.” More new and used items can be found in our shop! International shipping costs upon request!

Condition: new, neu ca. 12 Wochen ab Auftrags Italien 57900 € 1094.31 € 1 650 mm 0,5 - 170 mm 670 x 2200 mm 4000 m³/h 120 mm 6 bar 78 (+/-2) dB 22 kW 2600 mm 1350 mm 2100 mm 1125 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure. Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Hoods for extraction inside the machine, one per station. Touch screen for -Automatic star-delta connection of the main motors - Analogue ammeter for each group - Digital display for sheet thickness with decimal point tolerance - Material thickness adjustment (+/- 0.1 mm) - Machine condition monitoring with alarm messages FEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on request Variable feed speed via frequency converter 0.6 to 6.5 m/min. Rubber conveyor belt, oil and temperature resistant Automatic conveyor belt centring Lateral guides to prevent the belt from lifting off. Rubber pressure rollers in front and behind each station, oil and temperature resistant Idle rollers at the front and rear table INCL. OPTIONALTAMPICO BRUSH SYSTEM FOR CONVEYOR BELT CLEANING Ø 150 MM Bodpjwiquksfx Aqvoww 1 . WORKING GROUP - R Balanced contact roller Anti-oil and anti-heat Nitrile rubber coating Adjustable via eccentric shaft for working position and compensation of abrasive belt wear Pneumatic cylinder for automatic feed to working position and for lifting in case of emergency stop. Abrasive belts and/or Scotch Brite can be used. Motorised adjustment and electronic control of contact roll height. Variable speed motor with automatic brake in case of emergency. Pneumatic tensioning system for the abrasive belt. Sanding belt centring system, with electronic photocell. Oscillation adjustment in width and time. Diameter of contact roller mm 125 Positioning accuracy of the contact roller adjustment mm +/- 0,02 Grinding belt speed m/sek 3-18 Motor power kW 7,5 2. WORKING GROUP - X 2 rows of vertical brushes, 4 rotating clockwise and 4 counterclockwise. Transverse movement of the entire group (oscillating) Quick change holder for brushes Brush diameter mm 115 Number of brushes No 8 Oscillation stroke mm 15 Rotation motor power kW 2,2 Revs 1/min 1000 Oscillation motor power kW 0,4 Grinding brush speed m/sec 10,0 Optional accessories: B Group - External barrel brush Ø 150 mm with Scotch Brite Brush € 5150,00 with Wire Brush 0,3 mm € 6060,00 R GROUP - GRINDING BELT Motor 11 kW € 740,00 X GROUP - CUP BRUSHES Motor with variable speed 5,5 kW 350/1100 incl.

Condition: good (used), Year of construction: 2021, functionality: fully functional, Workpiece width – max. 780 mm Workpiece height – max. 120 mm Bedpfxe Agrgve Aqvsww Workpiece dimensions – min. 20x20 mm Total power requirement 6 kW Machine weight approx. 445 kg Space requirement approx. 1500x1100x1550 mm

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, type of input current: three-phase, Elumatec VS 750 four-head welding machine with EV850 4-axis CNC cleaning line. The welding machine and cleaner are currently programmed only for SCHÜCO profiles. Profile height range for welding: 30-185 mm Minimum window dimensions for welding: 350 x 350 mm Maximum window dimensions for welding: 2600 x 4000 mm Weld bead limitation: 0.2 mm and 2 mm The welding machine features a touch operator panel based on Windows XP The cleaner is also equipped with an operator panel Online connection is available between the welding machine and the cleaner After welding, automatic transport to the cleaner is provided The cleaner operates in both manual and automatic mode In automatic mode, the rotation station turns the window to each specific corner to be processed by the cleaner. We provide assistance with machine disassembly and loading for transport. Bwsdpfx Aox E Rd Djqvew

Condition: excellent (used), Year of construction: 2024, operating hours: 300 h, Workpiece width – max. 1200 mm Workpiece height – max. 170 mm Workpiece height – min. 0.6 (L+W > 5xH) mm Workpiece dimensions – min. 50x50 mm Working height 900 mm Bwjdpfx Ao Agn R Asqvew Conveyor belt speed 0.3-10 m/min Total power consumption 16 kW Machine weight approx. 2,650 kg Space requirement approx. 2100x2200x2100 mm

Condition: used, total length: 3,940 mm, total width: 1,980 mm, total height: 2,010 mm, Year of manufacture: 2005 Empty weight: 7.000 kg Working width: 950mm Working height: 0,5-120mm - Year: 2005 - CE marking present: Yes - Serial number: - Drive system: CNC - Number of stations [pcs]: 3 - └ Station type 1: Abrasive belt - └ Station type 2: Rotary brush - └ Station type 3: Rotary brush - Power [kW]: 39 - Min. sheet thickness [mm]: 0.5 - Max. sheet thickness [mm]: 120 - Max. working width [mm]: 950 - Transport dimensions: 3940mm x 1980mm x 2010mm (l x w x h) - Transport weight [kg]: 7000kg Bwjdpfxsxwnbus Aqvew - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, see website text Year of manufacture 2026 or Year of manufacture 2025 New floor scrubber, DAEWOO type DAFR70 Electric, battery-powered ride-on floor scrubber Serial no. 25DW07004ALE01 Year of manufacture 2026 Theoretical cleaning capacity approx. 3500 m²/h Working width 560 mm Cleaning brush / scrubbing brush Ø 560 mm Brush speed 200 rpm Suction nozzle width: 800 mm Fresh water tank volume: 70 liters Dirty water tank volume: 70 liters Travel speed 0-5.5 km/h Working time per battery charge approx. 3.5 hours Noise level 65 dBa Climbing ability max. 10% Battery voltage 24 volts Mains connection to the charger 230 volts, 50 Hz, with Schuko plug - Battery charger 24 volts, permanently installed in the cleaning machine - 2x drive battery 12 volts, 100 AH = 24 volts, 100 AH - one cleaning brush Ø 560 mm - two separate tanks for fresh and dirty water - electric motor-driven drive on the front wheel - very maneuverable due to 3-wheel chassis Machine length: 1265 mm Machine width: 600 mm Machine height: 1150 mm Bwedpoz Ek R Esfx Aqvew Machine unladen weight approx. 200 kg Transport dimensions L x W x H 135 x 98 x 140 cm Transport weight approx. 250 kg New machine, from stock New - Original packaging - unused, from stock

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 1,100 mm, type of input current: three-phase, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, sheet thickness aluminum (max.): 50 mm, sheet thickness copper (max.): 50 mm, sheet thickness brass (max.): 50 mm, total length: 2,000 mm, total width: 2,590 mm, total height: 2,150 mm, overall weight: 2,500 kg, input voltage: 400 V, warranty duration: 12 months, table width: 1,100 mm, workpiece height (max.): 50 mm, power: 13 kW (17.68 HP), workpiece width (max.): 1,100 mm, pass-through width: 1,100 mm, DM1100 2C Working capacity (mm): 1100×50 Number of cross-belt stations: 2 Cross-belt speed (m/s): 2-8 Feed speed (m/s): 0.6-3.2 Cross-belt motor (kW): (4x) 3 Feed motor (kW): (3x) 0.18 Total power (kW): 13 Current consumption (A): 30 Dust extraction port per head (Ø mm): 220 Dimensions (mm): 2000X2590x2150 Bodpfjyiyhlox Aqvsww Weight (kg): 2470

Condition: excellent (used), functionality: fully functional, RIDGID SeeSnake C40 camera system with TruSense Versa monitor used, from business liquidation The SeeSnake Compact C40 offers digital recording of inspections with Wi-Fi for quick and efficient organization and completion. Thanks to the tilting function, you can view the monitor at any desired angle or detach it for convenient placement at the work site. TruSense technology features an HDR (High Dynamic Range) image sensor and two-way communication between the camera and Wi-Fi-enabled monitors in the SeeSnake CSx series. Technical data according to the manufacturer: Pipe capacity 38 mm to 152 mm Push cable length 40 m Push cable diameter 0.26" (6.7 mm) with 0.12" (3 mm) fiber optic core Push cable jacket polypropylene Push cable minimum bending radius: 63.5 mm Weight (without battery): 8.0 kg Dimensions length: 63.5 cm Width 35.6 cm Height 43.2 cm Camera head: 1" (25 mm) Operating temperature -10°C to 50 °C Storage temperature -10 °C to 70 °C Ingress protection without monitor IPx5 Lighting: High-intensity LED sensor 512 Hz We recommend an inspection. Bwsdpfx Aoz Iba Asqvew Sale expressly excludes any warranty for defects. No guarantee or warranty. Information without guarantee. Information, details and technical data from the manufacturer. To avoid any misunderstandings regarding the item's condition and the scope of the auction, we generally recommend an inspection BEFORE placing a bid! Further technical data can be requested from the manufacturer. Our business hours are from Monday to Friday between 8:30 a.m. and 12:00 p.m. and 1:00 p.m. to 4:30 p.m. During this time, inspections and collections are possible and welcome, but only by prior appointment. Subject to prior sale, changes, errors and omissions.

Condition: ready for operation (used), IBS Maxi 91-2 washing machine, parts washing machine Washing tank: 190 liters Basket load: 200 kg Bwedpozq Addofx Aqvew Heating power: 6 kW Total power: 8 kW Serial number: 09.102.226L Usable height: 500 mm Basket diameter: 910 mm Heating temperature: 0-60°C You are welcome to visit us for an inspection. We would be happy to arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided a valid VAT identification number is available. Subject to prior sale. Visit our shop and see our other offers. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: like new (used), Year of construction: 2011, functionality: fully functional, type of input current: three-phase, input frequency: 50 Hz, temperature: 60 °C, load capacity: 250 kg, SUMMA DC3/OSK rotating basket, rotating drum cleaning equipment, Carousel degreasing machine with dryer. The chamber rotary machine of the Czech manufacturer operates on the principle of pressure spraying. The degreasing machine offers three surface cleaning combinations. The machine is suitable for surface degreasing of a wide range of materials. Manufacturer: SUMMA DC3/OSK Year of manufacture: 2011 Max. workpiece size: 770x500mm Max. workpiece weight: 250kg Electr. Power: 23kw Bath temperature: Max. 60°C Air temperature: Max. 120°C Bath (rinsing) heating: 12/6kw Drying air heating: 13.5kw Aerosol pressure: 0.28Mpa Pump performance: 70 liters/minute Machine weight: 520kg Machine dimensions: 1800x1800mm Height: 1500mm If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible. Bjdpswty H Dofx Aqvsww

Condition: excellent (used), Year of construction: 2021, operating hours: 809 h, Workpiece width – max. 200 mm Workpiece height – max. 100 mm Workpiece height – min. 0.6 (L+W > 5xH) mm Workpiece dimensions – min. 20x20 mm Bwjdpfx Aqj Agn Snsvjw Working height 980 mm Conveyor belt speed 0.3-5 m/min Total power consumption 8 kW Machine weight approx. 1,090 kg Space requirement approx. 1900x700x2150 mm

Condition: excellent (used), functionality: fully functional, Timesavers Series 22-1050-WMDMD The Series 22-1050-WMDMD, with a working width of 1050 mm and a table opening of 0.8-100 mm, is ideally suited for processing laser-cut, stamped, water jet-cut, or plasma-cut parts, thanks to its 3 stations. The belt grinding station allows for the removal of burrs and protruding edges. Subsequently, the edge burrs are removed and the edges are slightly rounded using the disc brushes. To achieve a uniform result, we have incorporated two oscillating brush stations in which the disc brushes rotate alternately to the left and right. Thanks to the quick-change system for belts and brushes, the machine can be reconfigured in just a few steps. Bodpfeznlxrox Aqveww The conveyor belt, as well as all other stations, are frequency-controlled, allowing for stepless speed adjustment.

Condition: new, Clean air dust collector AL-KO POWER UNIT 350 PLUS P-FU -Exhibition machine- Start-up with frequency converter, Pressure transmitter for demand-based control ----- Technical Data ----- Suction nozzle diameter: 355 mm, Nominal volume flow: 7,127 m³/h, Maximum volume flow: 10,000 m³/h, Maximum vacuum: 3,347 Pa, Bwsdpfx Ao Aaz S Aoqvow Filter area: 73 m², Chip collection volume: 3 x 250 liters, Number of bags: 3 pieces, Motor 400 V: 15.0 kW, Dimensions (L x W x H): 3,320 x 1,058 x 2,361 mm, Sound pressure level: 73 dB(A), Weight: 1,064 kg, According to: GS - HO - new exhibition machine -

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 3,358 h, machine/vehicle number: K22268, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: JORNS, working width: 6,410 mm, folding beam adjustment: 200 mm, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 2 mm, back gauge adjustment: CNC-controlled, back gauge: 1,250 mm, back gauge speed R-axis: 283 mm/s, back gauge travel distance R-axis: 1,250 mm, back gauge travel distance Z-axis: 1,250 mm, overall weight: 13,000 kg, total length: 8,500 mm, total width: 3,354 mm, total height: 1,938 mm, input voltage: 400 V, input current: 80 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, emergency stop, foot remote control, We offer this used Jorns JDB-150G-DP-1250-JC100-6.4-dsp panel bending machine for sheet metal, manufactured in 2023. Year of manufacture: 2023 Model: JDB-150G-DP-1250-JC100-6.4-dsp Bedpfxez Dille Aqvsww Rated current: 80 A Operating voltage: 3 × 400 V Frequency: 50 Hz Control voltage: 24 VDC Maximum hydraulic pressure: 210 bar Maximum pneumatic pressure: bar If you have any questions or need further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2010, operating hours: 965 h, functionality: fully functional, machine/vehicle number: 1036S00103, fuel type: gas, drive type: Treibgas, sweeping width: 1,000 mm, Sweeper machine Chassis number: 1036S00103 Condition: Ready for use and fully functional Bwodpfxj Agxmvs Aqvjw Technical condition: good

Condition: used, Coil line – Uncoiler and Leveler Year of construction: 1991 Coil width: 50 to 450 mm Sheet thickness with inactive leveler: 6 mm Sheet thickness with active leveler: 2 mm - Very good condition and comprehensive operating instructions Space requirement of the entire system L x W: approx. 7000 x 3000 mm Weight of the entire system: approx. 11 tons Good condition Leveler HMS Type RS 47-04/1, Machine No. Coil width, nominal width: 400 mm Coil width, maximum passage width: max. 455 mm Coil thickness at 400 mm width: max. 1.5 mm (for steel) Coil thickness at 400 mm width: max. 2 mm (for copper) Speed: max. 40 m/min Bodpfsif Sg Sex Aqvjww Number of leveling rolls: 7 pieces Leveling roll diameter: Ø 40 mm Number of tension rolls: 2 pieces Tension roll diameter: Ø 80 mm Infeed height, passage height: 1500 mm - Leveling rolls hardened, ground, and hard chrome-plated, with central support - Tension rolls hardened, ground, and hard chrome-plated, with hydraulic gap adjustment - Manual adjustment of the leveling rolls - Infeed guide with hydraulically extendable tongue and hydraulically adjustable idler roller - Adjustable lateral coil guide - All leveling rolls driven via distributor gearboxes with universal joints - Both tension rolls driven via gearboxes with universal joints - Frequency-controlled drive via geared motors - Leveler opening stroke 250 mm for cleaning the system or for processing thicker material, stroke movement via trapezoidal spindle - Ultrasonic loop control Transport dimensions L x W x H: 3600 x 2200 x 2200 mm Weight: approx. 4 tons Uncoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Coil outer diameter: max. 1600 mm (with loading table) Coil outer diameter: max. 2000 mm (without loading table) Diameter of the coil inlet disc: Ø 1700 mm Coil inner diameter, spreading range: 460-520 mm Coil width, nominal width: max. 630 mm Width of the spreading jaws: 750 mm Height of the uncoiler arbor above the base plate: 1500 mm - Drive of the uncoiler arbor via hydraulic motor and gear - Pneumatic retarder brake on the uncoiler arbor TWINFLEX - Hydraulic spreading of the uncoiler arbor, centrally via wedge slide system - Hydraulic pressure arm with hydraulically driven double rocker roller - Coil loading table with 12 tons lifting capacity and 300 mm stroke - Uncoiler in an above-floor running frame with motorized transverse travel drive Transport dimensions L x W x H: 3500 x 1900 x 2500 mm Weight: approx. 5 tons Central hydraulic unit, separate Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2 pumps REXROTH (tandem pump) - Oil cooler as an air heat exchanger with fan motor Transport dimensions L x W x H: 1600 x 850 x 1450 mm Weight: approx. 800 kg Electrical cabinet, separate - All cable connections are made via Harting connectors Transport dimensions L x W x H: 2800 x 500 x 2250 mm Weight: approx. 800 kg

Condition: excellent (used), Year of construction: 2020, 631 USED Floor cleaning machine Hefter Cleantech Turnado 55 CV EXTERNAL DIMENSIONS (in cm): - W: 50 - L: 110 - H: 120 Bwjdpfo Agpdvjx Aqvsw The price is a net price. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Year of construction: 1993, condition: good (used), 1 x parts washing machine Schwanog Waschomatic W 25 Year of manufacture: 1969 Technical data: Drum dimensions: 330 x 360 mm Slot dimensions: 2.2 x 18.5 mm Bjdpfsnl Ekrox Aqvjww Installation dimensions: L: 0.8 x W: 0.85 x H: 1 m The machine can be inspected at our warehouse at any time while it is powered on.

Condition: new, neu ca. 12 Wochen ab Auftrags Italien 153200 € 2895.48 € 1350 mm 0,4 - 120 mm 1370 x 2200 mm 6000 m³/h 150 mm 6 bar 4200 mm 2300 mm 2350 mm 4200 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP * Machine made of stress-free welded steel construction for stable and rigid structure * Work table with motorised height adjustment via 4 synchronised spindles. * Independent drive motors for each work group. * Hoods for extraction inside the machine, one per station. Touch screen for: * Automatic star-delta connection of the main motors * Digital display for sheet thickness with decimal point tolerance * Material thickness adjustment (+/- 0.1 mm) * Machine condition monitoring with alarm messages FEEDING SYSTEM * Robust steel structure, wear-resistant surface. * Vacuum conveyor belt on request * The table raises and lowers from 780 mm to a maximum height of 950 mm above the floor. The power of the motor for height adjustment of the table is 0.25 kW. * Maximum permissible weight on the table: 140 kg. * Variable feed speed via frequency converter 0,4 to 4,5 m/min, Option 0,2 to 2,0 m/min or 0,6 bis 6,0 m/min. * Rubber conveyor belt, oil and temperature resistant. * Lateral guides to prevent the belt from lifting off. * Rubber pressure rollers in front and behind each station, oil and temperature resistant. * Automatic centring device for the conveyor belt * Automatic servo cooled motor * Speed motor on the main touch screen 1 TH R GROUP DEBURRING WITH ABRASIVE BELT * Rectified and balanced contact roller with 180 mm diameter. Coating of oil and heat resistant nitrile rubber. Standard roller hardness 55° shores. Mounted on an eccentric shaft that allows to control the working position and compensate the abrasive belt wear, with a range of 8 mm. This system is controlled by a pneumatic cylinder that allows the automatic insertion of the group into the work and, in case of emergency and/or machine stop, the immediate removal of the sanding belt from the working point. It is possible to insert sanding belts and/or Scotch Brite. * Pneumatic on-off switch. * Roller adjustment up-down "grain" stroke 10 mm * Variable speed motor 11 kW with automatic braking in case of emergency. * Rotation speed in feed direction 4 - 18 m/s. * Width and duration of the oscillation setting. * Pneumatic tensioning system for the abrasive belt. * Sanding belt centring system, with electronic photocell, Oscillation adjustment in width and time. 2ND GROUP ROTATING BRUSH UNIT * 2 rows of vertical brushes, 4 rotating clockwise and 4 counterclockwise. * Each brush has a diameter of 350 mm and a length of 530 mm. * Motorised raising and lowering of the group to regulate the pressure of the deburring. * Variable speed motor 1,5 kW. * Variable speed group electronic inverter 6 - 12 U/min. * Brush motor with variable speed, power 6 kW (4 x 1,5 kW). From 300 to 900 U/min. * Speed programmable control and display on the electronic touch screen. CONTROL OF THE THICKNESS AND THE BRUSHES * Motorised table lifting with fine adjustment via 4 precision screws with ball bearings * Maximum operating pressure 120 mm * Pressure motor power kW 0,75 Bjdpfx Aqeynmw Rjveww * Pressure adjustment via touchscreen CONVEYOR BELT CLEANING Brush system in nylon canvas for cleaning the conveyor belt (length 1350, Ø =150 mm), located at the back of the machine under th...

Condition: good (used), functionality: fully functional, roller (bottom) diameter: 190 mm, roller (top) diameter: 200 mm, 4 - Roller-type round bending machine Manufacturer: Schäfer Model: SVRM Year of manufacture: 1990 Max. working width 2700 mm Max. sheet thickness: 7 mm, with 5 mm pre-bending capability Upper roller: 200 mm, driven Lower rollers / side rollers: 190 mm diameter, driven, with clutch Feed: hydraulic Digital displays Control panel with digital displays Bwjdpfx Aqj Ahkn Tovsw

Condition: excellent (used), Used Gecam - Euro Fintec 128 steel tube linisher / sander / polishing machine for sale Fintec 128 Tube finishing machine for sale Can be viewed under power with your steel tubes Bodjwbh Dyspfx Aqvoww

Condition: used, Year of construction: 2020, Timesavers Series 12 | 225 mm Deburring Machine | Year of Manufacture 2020 | 2 Disc Units We are selling a dry-running Timesavers Series 12 for processing small sheet metal parts. The machine was manufactured in 2020 and is equipped with two disc units and a feed conveyor. It is suitable for removing burrs from laser-, punched-, and waterjet-cut parts. According to the machine documentation, two flap discs with a 350 mm diameter are included in the scope of delivery. Machine Data Year of Manufacture: 2020 Working Width: 225 mm Design: Dry Operation Units: 2 Disc Units Serial Number: G2561-01 The machine can be inspected by appointment. We will gladly provide further photos and information on the actual operating condition to interested parties. Price: €12,900 net, ex works Leopoldshöhe. Loading and transport are not included. If you are interested, please send us your contact details. Bwsdpfxoz D U U Ss Aqvjw