Used Sheet Collator for sale (8,629)

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, MACHINE BUILT 2008 / COMPLETELY REFURBISHED 2026 Ideal for collating calendars, folded sheets (signatures), cardboard boxes of all kinds, packaging, ... Type - MKW RAPID UT - System Belt conveyor table 10 - Number of stations Special - Format 35 x 64 cm GS - High pile up to 70 cm 1 Automatic Collator Type MKW RAPID UT / B3 / GS - With 10 stations Belt-Conveyor-Table - Sheet sizes 10 x 14 cm up to 35 x 64 cm - High-Pile version with max. 70 cm stacking height - Paper weights up to 1.000 g/m² - Single sheets, folded sheets (signatures), carton, plastic foils, … - Belt conveyor transport table for continuous sheet transport - Timing belts radially adjustable for optimal sheet delivery - Timing belts radial adjustment - Adjustable tilt suction heads for optimal pick up of sheets - Pressure-vacuum pump in sound-absorbing housing - Blown air for accurate sheet layering - Adjustable sheet layering - Electronic machine control by Industry-PC system - High quality color display for reliable and clear operation - Self-learning electronic missing/double sheet control per station - Missing/double-sheet control by Infrared sensor MKW IR - Tandem function for double use 2 : 1 (TANDEM-Mode) - Dynamic station selection for optimized pre-loading for the next job - Inserting function at any station possible - Alternating insert function at any station possible - Alternating cardboard function at any station possible - Speed display infinitely adjustable - Advance counter with adjustable stop for number of sets and stop time - Jam control along the transport table - Active safety: Transparent safety hoods made of unbreakable PolyC. - Ejector unit inclusive additional station at the delivery AW 3 incl. (for ejection of faulty sets) - Raising unit for delivery rollers AHB incl. (for different paper formats in one set and signatures) - Delivery Jogger-system integrated DSS i 3 incl. (for normal and criss-cross delivery, incl. X-Jogger) - Hand feeding station at left side HV 3 (incl. automatic station-control in case of operating error) Warranty Time Fpjdez Iydyjpfx Al Uen 12 month spare parts warranty (critical spare parts pack shipped with machine) (not inclusive are belts, bulbs, rubber parts, suckers, …) Package of free spare parts A package of the most important spare parts and consumables like rubber parts will be send together with the machine. Validity of offer Subject to prior sales Detailed offer on request

Condition: used, Year of construction: 1992, offer consist of: - collator AC-6000 with - cover feeder CF-20 Horizon AC-6000 collator - model: air-suction collator - bins: 6 - error avoidance: misfeed-, doublefeed- and jamming control programs: - doublecycle (nonstop-work) - inject (simply and doubly) Fpodpez Hbfisfx Al Usn - booklet making program - selective collating - sheet size: max. 470x318mm; min. 210x148mm - processing strength: 50-260g/sqm - loading height: 100mm/ bin - production speed: max. 2.400 cycles/h - power: 400V - 1,86kW - dimension: 1650x650x1650mm - weight: 400kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: C11008, working width: 3,000 mm, sheet thickness (max.): 6 mm, overall weight: 7,500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. sheet thickness: 6 mm Max. working width: 3,000 mm Back gauge type: Electric Back gauge depth: 1,000 mm MACHINE DETAILS Drive type: Hydraulic Control: Conventional Power: 5.5 kW Dimensions & Weight Dimensions (L x W x H): 3,600 x 2,000 x 1,950 mm Fpedpsz Ebbujfx Al Uon Shipping weight: 7,500 kg Shipping packages: 1 unit EQUIPMENT Documentation Angle adjustment: Manual Shear gap adjustment: Manual Finger guard: Fixed

Year of construction: 1981, condition: used, machine/vehicle number: 152, We offer the Datamail Roll Collator BIELOMATIK JUMBO DATAMAIL COLLATOR P668 for sale. Configuration: Year: 1981 Jumbo paper unwinds, Ø 127 cm (50") Carbon unwinds, Ø 70 cm Cross glue unit NOT AVAILABLE! Programmable length gluing unit NOT AVAILABLE! Die-cutting cylinders in various sizes and cams for numbering machines. Snap out delivery with batcher and forward numbering capability (Bielomatik VWZ) – not visible in the photos. Includes some spare parts. Machine is operational. Video available upon request. Price including disassembly: 9,000 EUR. Fsdpfxsum T Nce Al Uepn

Condition: used, Year of construction: 2009, Horizon VAC-100m Air-Suction Collator Tower The VAC-100m is the ideal solution for print shops looking to expand their production capacity without investing in completely new systems. Its easy integration with the VAC-100a tower and high reliability make it a valuable addition to your production line. Key Features: Fedpfxju Sy Uuj Al Uepn Cost-efficiency: The VAC-100m is a cost-effective expansion solution as it operates without its own display and control unit. This reduces acquisition costs and allows you to expand existing systems efficiently. Expandable Capacity: With the ability to connect up to 5 VAC-100m towers to one VAC-100a tower, you can flexibly expand your collating capacity to up to 60 stations. This enables efficient handling of large jobs and a significant increase in your production capacity. Reliability: With error prevention features such as misfeed, double-feed, and jam control, the VAC-100m ensures that your production runs smoothly and without interruptions. Specifications: - Technology: Touch & Work (via VAC-100a) - Number of stations: 10 per tower - Expandability: Up to 6 towers (60 stations) - Error prevention: Misfeed, double-feed, and jam control - Job memory: 9 storage slots for repeat orders - Programs: Double cycle (non-stop operation), sheet insertion (single and double), booklet making program, block program, selective collating - Sheet size: Max. 500x350 mm; Min. 148x120 mm - Paper weight: 40-250 g/m² - Loading capacity: 55 mm per station - Performance: Up to 9,500 sets/h - Power: 230V; 50/60Hz - 1.86 kW - Dimensions: 842x652x1,961 mm - Weight: 310 kg 3 MONTHS WARRANTY We guarantee that the machine operates perfectly and we take responsibility for 3 months. Even after this period, we are always there for you and support you in solving any problems. All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: 621307509, controller model: Delem DAC-350, working width: 3,080 mm, sheet thickness (max.): 10 mm, overall weight: 11,500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. sheet thickness: 10 mm Max. working width: 3,080 mm Cutting speed: 20 mm/min MACHINE DETAILS Fpodpfx Alez Ebcfo Ujn Control system: CNC Controller: Delem DAC-350 Drive type: Hydraulic Connected power: 30 kW Dimensions & Weight Dimensions (L x W x H): 4,980 x 2,400 x 2,200 mm Weight: 11,500 kg Transport packages: 1 unit EQUIPMENT Electric back gauge Pneumatic sheet support system Fixed finger guard with hinged protection Ball-bearing table Motorized angle adjustment Motorized shear gap adjustment Documentation

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 3,358 h, machine/vehicle number: K22268, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: JORNS, working width: 6,410 mm, folding beam adjustment: 200 mm, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 2 mm, back gauge adjustment: CNC-controlled, back gauge: 1,250 mm, back gauge speed R-axis: 283 mm/s, back gauge travel distance R-axis: 1,250 mm, back gauge travel distance Z-axis: 1,250 mm, overall weight: 13,000 kg, total length: 8,500 mm, total width: 3,354 mm, total height: 1,938 mm, input voltage: 400 V, input current: 80 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, emergency stop, foot remote control, We offer this used Jorns JDB-150G-DP-1250-JC100-6.4-dsp panel bending machine for sheet metal, manufactured in 2023. Fjdoz Dillopfx Al Uspn Year of manufacture: 2023 Model: JDB-150G-DP-1250-JC100-6.4-dsp Rated current: 80 A Operating voltage: 3 × 400 V Frequency: 50 Hz Control voltage: 24 VDC Maximum hydraulic pressure: 210 bar Maximum pneumatic pressure: bar If you have any questions or need further information, please do not hesitate to send us a message or call us.

Condition: used, functionality: fully functional, total length: 48,000 mm, total height: 6,464 mm, Year of construction: 2019, 2019 FONG KEE THREE-LAYER CO-EXTRUSION FLAT SHEET LINE Up to 2,100 mm net sheet width | 7,000 operating hours Direct owner sale | Can be seen running by appointment Company-owned Fong Kee sheet extrusion line, offered for sale directly by the owner. The line has been used in our own production and remains fully assembled at our facility in Torbalı, İzmir, Türkiye. Originally specified for flat sheet production for furniture applications, the line offers multiple material and layer options. A running demonstration can be arranged in advance for interested buyers. MACHINE OVERVIEW Manufacturer: FONG KEE INTERNATIONAL MACHINERY CO., LTD., Taiwan Model: TSE-90/150/150-2400 Year of manufacture: 2019 Operating hours: 7,000 h Type: Three-layer co-extrusion flat sheet line Layer configurations: A/B/A or A/B/C Processable materials: PET, PMMA, ABS, PS (HIPS / GPPS), PC and PP The material options and layer configurations listed above have been confirmed through our own production experience. PRODUCTION SPECIFICATIONS Net trimmed sheet width: 1,500–2,100 mm Die width: 2,300 mm Specified sheet thickness: PET: 0.3–0.8 mm PMMA/ABS: 0.6–0.8 mm Specified maximum output: Up to 1,000 kg/h, depending on resin and sheet thickness Specified operating speed: 3–10 m/min EXTRUSION AND MELT DELIVERY Three vented extruders: Extruder A: Ø90 mm, L/D 35:1 Extruder B: Ø150 mm, L/D 32:1 Extruder C: Ø150 mm, L/D 32:1 Three hydraulic screen changers Three MAAG melt gear pumps Dynisco melt-pressure instrumentation EDI Ultraflow I three-layer feedblock EDI Ultraflex HRC 100 Fastgap die, 2,300 mm CALENDER AND SURFACE FINISHES Horizontal three-roll mirror-polishing stack Roll diameters: 400 / 600 / 600 mm Roll face width: 2,400 mm Mirror-finished, hard-chrome-plated rolls Multi-zone roll temperature control Additional dedicated matte calender roll included In our own production, we have achieved both high-gloss / mirror optical-grade surfaces and anti-glare / matte finishes on this line. DOWNSTREAM EQUIPMENT Dual-sided protective masking film application unit Haul-off unit Automatic guillotine cutting unit Conveyor unit Automatic vacuum stacking unit Fpsdpfx Alozzdnfs Ujn Two-drum turret winder with automatic tension control ELECTRICAL AND AUTOMATION Siemens SIMATIC ET 200SP PLC Siemens 19-inch and 12-inch Comfort HMI touchscreens Siemens SINAMICS G120 drives Schneider Electric main electrical switchgear Air-conditioned electrical cabinets INSTALLATION AND CONDITION Location: Torbalı, İzmir, Türkiye Overall line length: Approximately 48 metres Condition: Excellent used condition, fully assembled and preserved indoors Current status: Currently idle; can be demonstrated running by prior arrangement Reason for sale: Production facility reconfiguration Please refer to the technical layout drawing for the detailed equipment arrangement, installation dimensions and utility information. INSPECTION AND COMMERCIAL TERMS The complete line is available for on-site inspection and can be seen running by prior arrangement. Delivery terms: EXW Torbalı, İzmir, Türkiye. Reasonable offers will be considered, taking into account the overall commercial terms of the transaction. Detailed technical specifications, the line layout drawing, photographs and an operating video are available for review.

Condition: ready for operation (used), Year of construction: 1979, Immediately available ex-works: Swivel bending machine, Lotze Type 161 / 2500 / 6 Year of manufacture 1979 Bending length 2550 mm Material thickness up to 6 mm Fsdpsz Ixnwofx Al Ujpn Drive power 7.5 kW Weight 6 tons Price: EUR 5,500.00 (plus VAT) ex-works.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Rubber extrusion NBR&PVC Insulation sheet production line / available immediately The machine line can be delivered immediately, with few operating hours and in new condition. Fpodpey Exrpjfx Al Usn Production line units: 1. Zhejiang Baina 150 20D 1000Kg/h cold feed vacuum extruder (Standard) 2. Zhejiang Baina EJ-PPF-150-04-00 conical die (Pneumatic) 3. Zhejiang Baina 6m infrared curing oven (width 1000mm) 4. Zhejiang Baina 6m hot air curing oven (width 1140mm) 5. Zhejiang Baina 6m hot air curing oven (width 1440mm) 6. Zhejiang Baina 6m hot air curing oven (width 1600mm) 7. Zhejiang Baina 6m hot air curing oven (width 1800mm) 8. Zhejiang Baina 6m hot air curing oven (width 2000mm) 9. Zhejiang Baina 6m hot air curing oven (width 2300mm) 10. Zhejiang Baina 6m hot air curing oven (width 2500mm) 11. Zhejiang Baina 6m hot air curing oven (width 2800mm) 12. Zhejiang Baina 36M FF-SLX-02-00 (3 layers * 12m) cooling system 13. PCM automatic longitudinal and transverse industrial cutting machine 2000mm 14. AC-15AD liquid chiller with 285 liters water tank If you are interested, we will send you a detailed description and data.

Condition: used, Year of construction: 2017, functionality: fully functional, input voltage: 400 V, nominal power: 6 kW (8.16 HP), workpiece height (max.): 120 mm, workpiece width (max.): 780 mm, Q-Fin Topgrinder Year of manufacture: 2017 Maximum part width: 780 mm Part length: unlimited 2 stations for grinding or deburring, rotatable Manually guided grinding plates Mobile machine on rollers Fedpfxez Nxmqs Al Ujpn Benchtop grinding machine for deburring, grinding, and rounding the edges of sheet metal parts. Integrated vacuum pump for fixing the sheet metal parts to the machine table. Also suitable for small parts and long sheet metal strips. The side and front panels are magnetically held and can be folded down if required. Ergonomic operation via buttons on the handle. Used, in very good condition, with numerous accessories.

Condition: good (used), functionality: fully functional, degree of automation: automatic, actuation type: hydraulic, Equipment: emergency stop, foot remote control, We offer this well-maintained (used), fully functional Baier Biegemaster 4.125 swiveling bending machine, press brake. Manufacturer: Baier Model: Biegemaster 4.125 Condition: good (used) Machine type: Swiveling bending machine, press brake Fsdpfxoz I Tnrj Al Uspn The machine was used for bending and forming sheet metal and is in used condition, commensurate with its age. Inspection possible by appointment. Further technical data and images available upon request. Loading and transport will be arranged. Equipment/Features: - Hydraulic swiveling bending machine - Bending angle adjustable via control panel - Manual, foot, and automatic operation - Foot pedal control The machine is currently in use in our sheet metal workshop but is available immediately. If you have any questions or require further information, please send us a message or call us.

Condition: good (used), Horizon VAC-100a + PJ-77R Collator with jogger This machine is in very good condition, has low mileage, and is ready to work. Machine setup is controlled from the control panel. Made in Japan. Horizon VAC-60Ha Fjdozur Akjpfx Al Uepn Max size: 350x500mm Min size: 120x148mm Vacuum pick-up 10 shelves Stack height: 55mm Weight: 40-270g Power supply: 230V Weight: 310kg. Controlled by a touchscreen display and a mobile remote control. Jam, double-feed, and no-feed sensors Ability to save 9 preset jobs to the machine’s memory Factory set of tools and accessories, manual.

Condition: like new (used), functionality: fully functional, Year of construction: 2012, operating hours: 7,000 h, Equipment: CE marking, documentation/manual, RAS Multibend Center 79.26–2 Maximum board length: 2560 mm Maximum board width: 1500 mm Maximum bending height (four-sided): 203 mm Up and down bending Tool changer Board feeder for robot loading Fpsdpfez Ig Tujx Al Ujn KUKA loading robot KR 150-2K Various tools for sheet metal thickness 1-2.5 mm Only approximately 7,000 operating hours! Absolutely like new condition, evident, among other things, in the hardly worn original tools. Inspection while the machine is powered on is possible. Price is ex works; the buyer is responsible for dismantling.

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 625RS10HWPp-D22092022, coil weight: 10,000 kg, feed rate X-axis: 35 m/min, number of straightening rollers: 5, sheet thickness aluminum (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness copper (max.): 2 mm, inner diameter: 508 mm, sheet thickness (max.): 2 mm, outer diameter: 1,250 mm, mandrel diameter: 508 mm, coil width: 1,250 mm, coil outer diameter: 1,250 mm, number of blades: 8, type of input current: three-phase, working width: 1,250 mm, total width: 4,500 mm, total length: 5,700 mm, total height: 1,600 mm, load capacity: 10,000 kg, product width (max.): 1,250 mm, space requirement width: 4,500 mm, space requirement length: 5,700 mm, space requirement height: 1,600 mm, Krasser Centurio SCS-1250 slitting line with a Stolarczyk 10-ton motorized uncoiler For sale: a complete coil-fed sheet metal cutting and slitting line, manufactured by Krasser GmbH (Austria), installed new in January 2023 and used in-house ever since by a sheet metal processing company. Well-maintained, fully operational, and available for inspection while still running at our facility. Krasser Centurio SCS-1250 – slitting/cutting line Fedpfx Alsz D Ivvs Uspn Max. sheet/coil width: 1,250 mm — min. independent sheet width: 250 mm — min. slitting width: 75 mm between knives Material thickness range: steel (400 N/mm²) 0.4–1.5 mm, stainless steel (550 N/mm²) 0.4–1.0 mm, copper and aluminum 0.5–2 mm Max. cutting speed: 35 m/min Straightening unit: 5 rollers Longitudinal cutting: 6 pairs of slitting knives installed (5 standard + 1 additional pair), max. 8 Cross-cutting: electrically driven guillotine shear Roller-shear unit for partial cross-cuts included Automatic film-application (plastic protective film) unit included Automatic labeling unit included (label printer + applicator) Krasser Optimizer cutting-optimization software included Touchscreen HMI control, multilingual (including Spanish) CE-certified safety fencing Electrical connection: 3-phase 400–488V, 11 kW, 16A Pneumatic connection: 1/2", 6 bar, filtered and dried air, 50 l/min Approx. overall footprint (line + uncoiler): 5.7 m long x 4.5 m wide x 1.6 m high Lifetime production data (as of today): 176,941 m of material processed, 60,610 cross-cuts — machine has been in steady, reliable production use Stolarczyk uncoiling set (motorized, 10 tons) Manufacturer: Spółka Stolarczyk (Poland) — Type RS10HWPp-D, year 2022 Max. coil load: 10,000 kg (10 tons) Hydraulic mandrel expansion — mandrel/coil inner diameter 508–610 mm Max. coil outer diameter: 1,250 mm — coil width: 250–1,250 mm Max. unwinding speed: 30 m/min Coil car included, with hydraulic vertical lift (306 mm) and electric horizontal travel Electrical connection: 400V, 6.5 kW Weight: 3,150 kg The line and uncoiler are sold together as a working unit. Removal/dismantling and logistics to be agreed with the buyer. For technical questions or to arrange a visit, please contact us by email — we're glad to answer any question and share further documentation, photos, or a video of the machine running.

Condition: excellent (used), machine/vehicle number: CUTSTAR74/274, type of input current: three-phase, input voltage: 400 V, For sale: Heidelberg CutStar XL 75, an industrial roll-to-sheet feeding and cutting system designed for integration with Heidelberg Speedmaster XL 75 sheetfed offset printing presses. The CutStar system enables printing materials to be fed directly from rolls, automatically cut into individual sheets, and transferred to the printing press. This solution allows printing companies to use roll-fed materials in sheetfed offset production, helping to optimize material costs and improve production efficiency. The system is offered together with a Corona Plasma Plus surface treatment unit. Technical Specifications * Manufacturer: Heidelberg / Bielomatik Leuze GmbH + Co. KG * Model: CutStar XL 75 * Machine type: Roll-to-sheet feeder and cutter * Year of manufacture: 2011 * Serial number: CUTSTAR74/274 * Power supply: 3 × 400 V * Frequency: 50 Hz * Rated current: 52 A * Connected load: 40 kVA * Supply fuse protection: 100 A * Control voltage: AC 230 V / DC 24 V Included Equipment * Heidelberg CutStar XL 75 roll-to-sheet feeding and cutting system * Corona Plasma Plus surface treatment unit * Electrical control cabinets * Associated components and accessories shown in the photographs Operating History and Condition The system was previously installed on a Heidelberg Speedmaster XL 75 printing press with over 200 million impressions. The equipment was fully operational and in very good technical condition before dismantling. The entire system was professionally dismantled by Heidelberg Polska technicians, ensuring proper disassembly and preparation for transportation. The equipment is currently dismantled, secured, and stored in our warehouse on transport pallets. Due to its dismantled condition, a live operational demonstration is not currently possible. Additional photographs and technical information can be provided upon request. Fpsdpfx Aljz Ny A Hs Usn

Condition: good (used), Protech Horizontal Collator Model: HC2010 Fjdpfsv T D Dujx Al Uspn Plastic belt, belt width: 250 mm Distance between dividers: 200 mm, divider height: 150 mm Clearance: 140 mm x 150 mm Total dimensions: 2900 mm x 560 mm x 1540 mm.

Condition: excellent (used), Year of construction: 2015, operating hours: 1,600 h, input voltage: 400 V, input frequency: 50 Hz, We are offering this used Plank R-380 deburring or edge rolling machine, manufactured in 2015, for sale. Machine type: R-380 Fjdpfxez I S D Eo Al Uspn Machine no.: 404 Year of manufacture: 2015 Rated voltage: 400 V Frequency: 50 Hz If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2003, operating hours: 25,000 h, functionality: fully functional, type of input current: three-phase, overall weight: 13,000 kg, FOR SALE: Finn-Power F5 S Turret Punch Press Available for purchase is a high-quality, Finnish-made Finn-Power F5 S turret punch press. Manufactured by the renowned Lillbacka Corporation, this machine offers robust performance and precision for demanding sheet metal fabrication. Technical Specifications: Machine Type: Finn-Power F5 S Manufacturer: Lillbacka Corporation, Finland Fodey Iwmwspfx Al Uopn Manufacturing Year: 2003 Punching Force: 300 kN Max. Working Pressure: 300 bar Machine Weight: 13,500 kg Key Features: CE Certified: Fully compliant with European safety and quality standards. Heavy-Duty Build: The 13.5-ton machine weight ensures excellent stability and vibration damping for high-precision work. Proven Reliability: Built with industry-leading technology and patented Finnish engineering.

Condition: good (used), FS Frank Schäffler Fsdpfx Ajz I Txwjl Uopn Used Machines You are bidding on: a branded device – a press brake, from a very good and well-known manufacturer – Schechtl. Device features: Press brake Schechtl HA The beam bends cleanly – a test is possible. Degree indicator Bending length approximately 310 cm Sheet metal thickness up to 1.5 mm (steel, aluminum, zinc, etc.) Standard beam Foot closer Sheet metal support Optionally, a roller shear with a beam can be added; this would have to be ordered new from the factory. Price list from 2024 – net price – prices are now significantly higher. Important! Optionally, you can find and purchase many machines and machine accessories in our shop, such as various beams, depth stops, and everything else related to sheet metal and steel processing, including press brakes, plate shears, drilling machines, and round machines, as well as slitting and profiling machines – accessories (beading device, round rolls for gutter production, back gauge, etc.), and other hand tools and spare parts from many top manufacturers. I am always available to answer your questions. You will receive an invoice with VAT shown. Free loading is possible – weight approximately 2000 kg. Inspection and testing are possible and desirable after scheduling an appointment by telephone. Payment in cash upon collection. Take advantage of our experience and expertise; we will be happy to advise you. Collection by the buyer himself (or by a shipping company commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approximately 3 minutes from the A3 and A81 highways. Article number: Press brake HA 310

Condition: used, functionality: fully functional, Year of construction: 1983, Hand-operated swiveling bending machine Manufacturer: FASTI, Type: 205, 1020 x 2 mm Fpedpsz Ah Apsfx Al Usn Year of manufacture: 1983 Technical data Manufacturer: Fasti Type: 205 Year of manufacture: 1983 Usable length: 1020 mm Sheet thickness: 2 mm Stroke: approx. 200 mm Dimensions: approx. L 1.70 x W 0.50 x H 1.60 m Weight: approx. 750 kg Equipment - Swiveling upper die - Stroke approx. 200 mm - Various bending rails as shown in the photo All information is subject to change without notice. A demonstration can be arranged at our showroom at any time.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 2402-10, working width: 900 mm, overall weight: 4,000 kg, input voltage: 400 V, input frequency: 50 Hz, power: 20 kW (27.19 HP), workpiece width (max.): 900 mm, grinding wheel diameter: 1,100 mm, grinding width: 900 mm, Equipment: documentation/manual, We are selling our Timesavers 42-Series-900-WRD (belt sander + Scotchbrite deburring wheel) in a dry version. The machine is in perfect working order and is in very good condition, both visually and technically. Since our dry dust extraction system is permanently integrated into the building and will remain here, we are providing a BRAND-NEW 7.5 kW wet collector – this means the machine is immediately ready for operation without its own extraction system and is also suitable for aluminum/mixed material processing. Fodpjz Hifwefx Al Ujpn Technical data: - Working width / conveyor belt: 900 mm - Belt sanding unit (W): belt width 900 mm - Scotchbrite deburring wheel (D): Ø 1,100 mm - Year of manufacture: 2008 - Serial number: 2402-10 - Connected power: 20 kW, 400 V / 50 Hz - Weight: approx. 4000 kg Scope of delivery: - Timesavers 42-Series-900-WRD - 7.5 kW wet collector, new/unused - New conveyor belt - Existing sanding belts - Documentation Availability: from mid-November 2026. Until then, the machine will be in production and can be inspected and tested with your own parts at any time while powered. Reservation possible with a deposit. Collection from Bodnegg (88285, near Ravensburg). Loading with a forklift is possible. Transport can be arranged upon request.

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 641/302, total width: 600 mm, total length: 800 mm, total height: 1,300 mm, overall weight: 120 kg, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the specified timeframe between November 16, 2026, and November 26, 2026! MACHINE DETAILS Fsdpfsz Il Ikex Al Uepn Operating voltage: 380 V Frequency: 50 Hz Rated current: 30 A Connected load: 8.1 kW Dimensions & Weight Dimensions (L x W x H): 800 x 600 x 1,300 mm Weight: 120 kg External Reference: Steinbach & Holler - Lot 62

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 200711, compressed air connection: 6 bar, type of input current: AC, Equipment: documentation/manual, Bührs (W+D) BB700 16K inserting system with Müller Apparatebau cut-sheet front end, built 2008. Currently in daily production at our site in Barnstaple, North Devon, UK. Viewing under power available by appointment. MACHINE DETAILS - Model: Bührs BB 700 16K, serial no. 200711, built 2008 - Speed: up to 16,000 mailpieces per hour (single page) - Total mailpieces: 25,932,497 (September 2026). Individual feeder counts available on request. - Feeders: 8 insert stations (7 x RF2 rotary, plus RF2K friction feeder on station 8) and envelope feeder - Envelope sizes: C4, C5 and DL Fpsdpfx Alez Iy Tno Uon - Integrity: Lake Image Systems camera reading system (v02.06.27) with 4 cameras fitted for full matching: one on the Müller front end, two on insert stations and one on the envelope station. Capacity for up to 8 cameras. Lake camera PC runs Windows XP; standalone operation recommended. - Software: W+D BSC 3.0 (03_03_24_00), Inserter 03_02_63_00, Bührs IBC controller 2.4.2.0 - Delivery conveyor included - Power: 400/230 V three-phase + N + PE, 50 Hz, 11.4 kVA total load, 25 A max fuse (BB700 plate rated 5 kW) - Compressed air: 6 bar filtered, 945 Nl/min MÜLLER FRONT END (model / serial) - Cut sheet feeder: 6687c / 54787 - Transport unit: 6995c / 57255 - Spacer: 6975c / 57230 - Accumulator C4: 6999c / 61322 - Accumulator C5: 6895c / 55307 - Folders: 6826c / 58116 and 6822c / 57630 - Exit transports: 6989c / 57997 and 6815c / 58037 CURRENT CONFIGURATION The line has been modified from the original OEM layout (original June 2011 W+D drawing included in the pictures for reference only): - One RF2 feeder station added (original: 6 x RF2 + 1 x RF2K) - Müller front end reconfigured with folders and a C5 accumulator added - Turnover belt section, MT100 mailtable, distance module and eject gate removed. Output leg now approx. 3.5 m (originally 7.5 m). - Power and air figures are taken from the original drawing, which included the removed modules, so actual demand is likely to be lower. Please confirm as-installed dimensions on site before planning installation or transport. SERVICE AND MAINTENANCE - Annual service by BW Converting, most recently August 2026, including a rebuild of the crossover section - Accumulator EPROM upgrade fitted January 2026 - Maintained in-house by our own engineering team, with daily safety checks and weekly, monthly and quarterly PMs against documented checklists - Full CMMS maintenance history available from August 2024 - All manuals available, in physical and digital copies REMOVAL Collection only. The buyer is responsible for decommissioning, removal and transport. We do not arrange decommissioning or delivery.

Condition: used, functionality: fully functional, Year of construction: 2013, degree of automation: semi-automatic, actuation type: electric, sheet thickness steel (max.): 2 mm, sheet thickness stainless steel (max.): 1 mm, sheet thickness aluminum (max.): 2 mm, back gauge: 1,000 mm, input current: 60 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: angle stop, documentation/manual, emergency stop, foot remote control, We are offering this used Schechtl MBM 310/ECT pivoting bending machine, manufactured in 2013. Fjdpfezrabiox Al Uspn Year of manufacture: 2013 Model: MBM 310/ECT Serial number: MA6239 Capacity: 1.00 mm Three-phase frequency: 50 Hz Machine rated current: 60 A Wiring diagram number: 300.000 Order number: 20.013 If you have any questions or require further information, please do not hesitate to send us a message or call us.