Used Silo for sale (667)

Condition: used, Year of construction: 2017, functionality: fully functional, KNOLL FKB 33000 Systems for Chip Processing Processing chips offers numerous advantages: if they are dry and sorted by type, disposal costs are reduced. Depending on the material, the chips can even be sold. A chip processing system includes various components, depending on the requirements: conveying and collecting equipment, magnetic separation technology, filters, and volume-reducing briquetting presses. Containers or chip silos are also required. The components can be linked together and operated fully automatically. Application areas The chip processing system is suitable for both semi-automatic and fully automatic processing of metal chips. Automatic conveying systems or operating personnel with trolleys/containers handle the chip transport from the machining centers. The system is used in almost all manufacturing areas of the machining industry. The processing of different materials (e.g., aluminum, steel, or cast iron) can also be realized using separate systems. Features • Chip drying is a prerequisite for safe transport on public roads. • Volume reduction lowers storage and transport costs. • Recovery of chips and coolant saves the environment and reduces costs. Possible main components • Lifting/tipping device • Chip shredder • Chip centrifuge Ljdpfx Ajz D Uvpehajah • Chip conveyor • Separation channels • Magnetic separation technology • Briquetting press • Coolant filter and collection container • Control technology and wiring • Container filling • Chip silo

Condition: used, gearing type: other, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden. Superstructure: Compressor with oil cooling. The compressor is operated via tipping hydraulics! Oil motor Sunfab type M-034, No. 278048, silo compressor GHH type CG80 H with diesel bell, machine No. 383266 WO2225NJ630F4DG, silo oil 405 spec. compressor oil K-10 ltr., pressure silencer W1-12 s2.0 inch Storz C2.0 inch internal thread, intake air filter W12/13 M lid R F-Part. AL17 safety valve R 1 1/2 inch 2.6 bar, measured compressor speed on Szm motor 1050 rpm, split drive large = compressor 3450 rpm. Dismantling of a Feldbinder silo. The compressor was overhauled in 2006 for approximately €9,000; invoice is available. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Laedpfsi Rnx Ujx Ahajh

Condition: good (used), Year of construction: 1987, overall weight: 42,000 kg, total width: 6,000 mm, total length: 7,800 mm, total height: 3,900 mm, sheet thickness (max.): 22 mm, Flanging and dishing machine SCHLEIFSTEIN - KBol 4022 MACH-ID 9659 Make: SCHLEIFSTEIN Type: KBol 4022 Year: 1987 Range off edge radius Manual 20 - 500 Range off edge radius Automatic 150 - 500 Hydraulic Controllable forming roll drive Hydraulic displacement drive Clamping device without hole Max. pressure manipulator 2000 Psi / 140 bar Max. pressure press 5700 Psi / 400 bar Max. speed forming roll 170 M/Min Kunkel head forming rolls: R = 350 R = 300 R = 275 R = 250 R = 200 R = 175 R = 150   Basket bottem Knocker bottom Pressure vessel bottom Boiler bottoms Flat floor Plate base diffuser bottom Tank bottom Tank bottom Radar reflectors Engine parts Dispense air Silo hoppers Cooker hoods Container parts Hemispheres Max. workpiece: 4600Ø Maximum sheet thickness:22mm Max. dishing radius: 700mm Min. product Ø: 800 Min. plate thickness: 4mm Min. dishing radius: 35mm Power: 90kW Length: 7800mm Width: 6000mm Height: 3900mm Weight: 42000kg Ledpfx Ahszfi Hhjaeah Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), functionality: fully functional, 1 Used Small Concrete Mixing Plant Ljdjyk Ev Rspfx Ahasah For example, for precast concrete production Manufacturer: PEMAT Type: 0.5 m³ Aggregate Storage 2 bins 2 separate dosing and discharge conveyors per hopper Mixer: 0.5 m³ pan mixer Dosing: Aggregates via dosing conveyors at the hopper 250 kg cement scale 100 l spirit level Cement silos 1 x 40 ton Control: Manual operation / control panel AVAILABLE IMMEDIATELY Location: Northern Germany Offer is net ex works Subject to prior sale, errors and/or misrepresentations excepted Sold as is, without warranty or guarantee, lying down and/or standing up Reproduction, further use, publication and/or copying of this offer is strictly prohibited!

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, Used Mobile Concrete Batching Plant / Concrete Filling Station Manufacturer: PROMEKON GmbH Model: QUASIMIX 1000S Availability: Immediately Location: Northern Germany Year of construction 2022 Previous production: ca. 400m3 Technical Specifications Aggregate Storage • 1 double hopper: 2 × 2.4 m³ • Incl. 2 separate dosing belts Mixer • Pan mixer: 1 m³ • Output: approx. 25 m³/h • Incl. automatic mixer scale (calibratable) Dosing System • Aggregates via dosing belts at the hopper • Cement dosing Lasdpfsynhkfex Ahaeh • Water dosing via water meter Cement Silo • 1 × 27.3 m³ Control System • Fully automatic process and system control • Designed for self-service operation Terms of Sale • Offer is net ex works • Subject to prior sale • Errors and/or misstatements excepted • Sold without warranty or guarantee • Condition: as seen, lying and/or standing • Any reproduction, reuse, publication, or copying of this offer is prohibited

Condition: used, functionality: fully functional, Year of construction: 1988, 1 Unit Used Concrete Batching Plant Manufacturer: Liebherr Type: Mobilmix 60 Year of Manufacture: 1988 Output: approx. 55 m³/h (compact concrete at 30 sec. mixing time) Aggregate Storage 4-compartment inline silo 2 × 30 m³ + 2 × 40 m³ Mixer Liebherr ZE 1000/1500 Equipped with moisture probe / moisture measurement system Weighing / Dosing System Aggregates via weighing conveyor: max. 2,500 kg Cement scale: 250 kg Water scale: 250 liters Cement Silos 3 × 60 tons – Manufacturer: Kurz Ledsy Hia Tepfx Ahaoah 1 × 60 tons – Manufacturer unknown Control System Gedis Operator Station-Control container Additional Equipment Partial enclosure included Admixture container included Available immediately Location: Ludwigslust / Northern Germany Offer is net, ex works (EXW) from current location Subject to prior sale Errors and/or misstatements excepted Sold as seen, without warranty or guarantee - Any reproduction, reuse, publication, or copying of this offer, in whole or in part, is strictly prohibited.

Condition: excellent (used), Year of construction: 2022, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: SN210551, overall weight: 14,000 kg, type of input current: AC, input voltage: 400 V, power: 400 kW (543.85 HP), Equipment: type plate available, A MIXACO heating/cooling mixer is a combined system consisting of a heating mixer and a downstream cooling mixer, specifically designed for the processing of powders, granules, and compounds (e.g., PVC dry blends, WPC, or masterbatches). Technical specifications – summary (details can be found in the documents): Hot mixer: • Volume: 3500 liters – Usable volume: 2500 liters • Tip speed: 5-50 m/s • Made of duplex steel – 1.4462 stainless steel • Power drive with 400 kW FC controlled • Vacuum up to 150 mbar abs. Cold mixer: • Volume: 9000 liters – Usable volume: 7650 liters • Tip speed: 3.5 – 7 m/s • Made of 1.4541 stainless steel • Power drive with 90 kW FC controlled The operating principle is divided into two physically and apparatus-wise separate process phases: 1. The heating mixer phase (heating and homogenizing) • Mechanical friction: In the heating mixer, a modular mixing tool rotates at a high circumferential speed (approx. 10–40 m/s). The intense flow and vortex formation (mixing vortex) causes the particles of the mixture to rub intensely against each other. • Heating: This mechanical friction generates the necessary thermal energy directly in the product, quickly and evenly heating the material to the desired target temperature (sometimes exceeding 100 °C). • Recipe component addition: At the same time, all recipe components, such as additives, dyes, or liquids, are perfectly homogeneously distributed. An integrated aspiration system also ensures the dehumidification of the mixture. 2. The transfer Lajdpfez Iww Rjx Ahaoh • Once the target temperature defined in the process program is reached, a contoured, dead-space-free outlet opens on the heating mixer. • The hot, homogeneous mixture is transferred with minimal residue and quickly to the cooling mixer, which is located directly below or next to it. The heating mixer is then immediately available for the next batch. 3. The cooling mixer phase (gentle cooling) • Heat exchange: In the cooling mixer (available in vertical or horizontal design), the hot material is passed over cooled surfaces. • Water cooling: A targeted cooling water circuit in the double jacket (bottom and side walls) efficiently removes thermal energy from the dry blend. • Agglomeration prevention: A slow, material-friendly stirring mechanism keeps the mixture in motion until the final storage temperature is reached. This prevents caking (compaction) due to residual heat before the material is transferred to silos or further processing. Summary created with AI. The units can be inspected in operation in the Netherlands. The system for sale was used in the R&D center of UBQ for development purposes. This explains the very good condition for the low number of production hours. We also have a steel structure available for the setup. This is not included in the price. If there is interest, it can be negotiated separately. Currently, the system is located outside of Europe – we need to determine whether direct transport is feasible or whether import to Europe by UBQ is more sensible (which would allow for a sale within Europe with a reverse-charge mechanism).

Condition: used, functionality: fully functional, Complete stationary sawmill including: Log infeed, transverse conveyor Log lifting device with ejector Transverse conveyor and feeder to the clamping carriage Clamping carriage, hydraulically operated, with auxiliary carriage, electrically operated; the entire sawing line can be controlled from the clamping carriage. FULL SAW FRAME BRAUN CHGB 71/75 with automatic overhang adjustment and stepless feed Saw blade tensioner Jansen, hydraulically operated Electrically adjustable wedge with electric extraction rollers Roller conveyor with pusher Spiral roller conveyor for boards to the edging line Transverse conveyor in front of the edger Undertable cutoff saw Laodsz I Tabopfx Ahash DOUBLE EDGER PAUL KMEZ with trim removal system Roller conveyor after the edger with discharge to the left/right Saw blade sharpening machine for saw frames, Vollmer Saw blade setting machine for saw frames, Riva Circular saw sharpening machine, Vollmer Sawdust and trim disposal, shaking chute, vibrating screen with 1 fraction 2 conveyor belts for feeding into the silo

Condition: excellent (used), Year of construction: 2010, Ultrafiltration plant for fermented products 3 Main items: 1) Thermization unit 2) Ultrafiltration (UF) for fermented milk 3) Cooler and Silo. The line is used to produce Quark/Skyr. The thermization and ultrafiltration unit are also suitable for producing other fermented and concentrated dairy products such as: Skyr, Mascarpone, and Double Cream cheese. Key data: - Input: 3,500 - 5,000 liters per hour of fermented skim milk, full-fat milk, or enriched products. - Concentration factor: 1.8-2.5 1) Thermization unit Complete skid-mounted thermization unit. Flow rate: 3,500 up to 5,000 liters (depending on the product). Manufacturer: Tetra Pak Temperature cycle: Input: 21-30 °C (incubation temperature) -> recuperation (permeate cooler) -> thermization at 55/60°C or pasteurization at 72/95 °C -> holding -> output to ultrafiltration at approx. 45 °C. Complete unit including: * Stainless steel frame in which everything is pre-assembled. * Closed balance tank with spray bowl. * Centrifugal product pump, stainless steel casing, flush seal, type: LKH. * Plate heat exchanger, 4 stages, new, Tetra Pak, Clip6-SR Model. * Control box with all connections for sensors and pneumatic valves. * Holding tube for 5,000 liters per hour, adjustable by connecting more or fewer tubes: 30 seconds up to 180 seconds in 9 stages. 2) Ultrafiltration unit Manufacturer: Tetra Pak Type: Tetra Alcross US P&F Serial number: T5845810096 Year: 2010 Capacity: Input up to 5,300 liters/hour Description: Concentrates yogurt or fermented milk to achieve the desired composition and texture. Laedpfxsz Imdas Ahaoh The UF separates the product into retentate and permeate. The retentate is the product, with proteins and fat (if included) concentrated. The advantage of this design of UF (compared to spiral-wound UF and separators) is that it is suitable for fermented products with and without fat. Also, all proteins are concentrated (even whey proteins). This results in high pressures in the system; filtration can only be achieved with a plate and frame filtration system with flat FR60pp filters and rotary piston circulation pumps. Some example products that can be made with this system: Input: skim milk 9% TS -> output approx. 16% TS (Skyr). Input: 20% TS including fat -> output: cream cheese or mascarpone. Input: pre-concentrated fermented skim milk up to 12% TS -> output up to 18% TS (Quark). The limiting factor is the permeate output. Approximate permeate per stage: Stage 1: 1100-1755 liters/hour, 13.5 m2 filters. Stage 2: 675/1170 liters/hour, 9 m2 filters. Stage 3: 320/585 liters/hour, 4.5 m2 filters. Stage 4: 300/585 liters/hour, 4.5 m2 filters, 15 bar. Filter: plate and frame type, manufacturer: Tetra Pak - DDS, model: M37 Complete unit including: * Stainless steel frame. * 2 balance tanks with spray bowl (feed and permeate return). * Feed pump Tetra LKH. * 4 circulation loops including circulation pumps. First stage with centrifugal pump, 3 stages with Waukesha 320-U2 rotary piston high-pressure pumps. Last stage up to 15 bar pressure for highly viscous products. 3) Quark silo, cooler, and pump. Manufacturer: Schwarte-Milfor Type: Quarksilo Serial number: 3580 Year: 2011 Capacity: 5,000 liters Description: Robust conical design for very viscous products. Insulated. Hermetic, ultra-clean with sterile air. Sensors for level and temperature. On inlet: - Plate cooler Manufacturer: Tetra Model: Clip line C6 Thermal cycle: 45 -> approx. 18°C

Condition: used, EGLI Frozen Butter Block Cutter / Model : V1 / Condition : Good / IN STOCK EGLI Frozen Butter Block Cutter High speed Cutter Safety Door with air operated actuator The machine is used by adding in the butter blocks and the door closes automatically, the piston applies pressure to the block pushing this towards the cutting divide that rotates at high speed . The butter pieces are dropped below the machine into stainelsss steel hopper or silo . Usage: Frozen Block cutter for butter and similar products Lodpfxsz Ht Ebo Ahaeah Electrics: 3~ / 400 v/50hz Air: 6 bar -8bar

Condition: good (used), Year of construction: 2002, ARCEN CONCRETE BATCHING PLANT – FOR STABILIZATION PRODUCTION. YEAR OF MANUFACTURE: 2003. CONDITION: GOOD. MIXER: 3500 l/2.5 m3 – 160 t/h. AGGREGATE STORAGE BIN, CEMENT SILO, CATERPILLAR GENERATOR. Lsdoz H H R Rspfx Ahasah

Condition: good (used), Containers, storage containers, ceramic containers, stoneware containers, ceramic storage vessels, earthenware containers, acid-resistant stoneware, fermentation crocks, sauerkraut crocks, ceramic barrels, earthenware pots Ledpfx Aoz Epb Nohaoah -Manufacturer: VEB Crinitz N/L, Ceramic containers, acid-resistant stoneware -Capacity: 100 liters -Material: KER 515 acid-resistant stoneware ceramic GDR TGL standard 7838 -Opening: Ø 205 mm -Number: 3 containers available -Price: per piece -Dimensions: 490/450/H810 mm -Weight: 84 kg/unit

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE COMPACT series Stationary Concrete Batching Plants provide satisfaction of all levels need with practical and effective solutions. Stationary concrete batching plants can easily and efficiently reach high capacity production of homogeneous concrete mixture. COMPACT series have easy operating system and lowest investment costs. In addition, the plant provides the use of enterprise resources accurately, so that gaining time-saving will transform to more earnings. . TECHNICAL SPECIFICATIONS: Model: COMPACT 180 Production capacity: 180 m3 Mixer type: Twinshaft – 4.5 m3 Aggragate bunker: 5x30 m3 Cement weighing: 2000 kg Additives weighing: 2x50 kg Water weighing: 1000 lt Cement silo is optional. COMPACT 180 consist of: • Aggregate Storage Hopper • Aggregate Weighing Hopper • Aggregate Transfer Conveyor or Bucket System • Twinshaft Mixer • Mixer Chassis, Walking Platforms, Ladder • Water Weighing Hopper • Cement Weighing Hopper • Admixture Weighing Hopper • Air Compressor • Cement Screw Conveyor • Bolted Cement Silo • Top Filter, Safety Valve and Accessories • Control Cabinnet Lajdpez D U Dasfx Ahaoh • PC and Automation System • Control and Power Panel FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Year of construction: 2005, condition: excellent (used), Vertical block mould machine: Kurtz mod. Ecomat Basic data: • Year of production: 2005 • Block dimensions (LxWxH): 1060x1320x5200 mm The set includes inlays (height reducers) for blocks: - 1060x1320x5130 mm - 1060x1320x4000 mm • Electrical power demand: 400V; 50Hz • Operation silo • Roll out conveyor • Block scale • Inkjet printer • Complete documentation We also have for sale other machines for EPS (expanded polystyrene) production, such as: •steam generator •steam accumulators with capacity •3x cutting lines •3x blockmolds •pre-expander It is also possible to purchase a complete production line (including installation, commissioning, and staff training). Lasdpfexq N Amox Ahajh

Condition: repair required (used), functionality: not functional, operating hours: 12,015 h, power: 11 kW (14.96 HP), input voltage: 11 V, intake manifold diameter: 500 mm, filter area: 213 m², total height: 7,500 mm, total length: 3,000 mm, total width: 3,000 mm, 213 m² filter area (standard filter hoses), vibrating motor, fire protection damper in the return air duct, motorized adjustment of the return air (inside/outside), fire hose, approximately 27 m³ intermediate silo, articulated arm discharge to the press. Briquetting press: motor 11 kW, 12,015 operating hours. The hydraulic pump was replaced and the hydraulic block was overhauled at approximately 10,000 hours; the hydraulic cylinders are leak-proof. The press operates in automatic mode with a level sensor; a second sensor is activated when the silo is overfilled. The briquettes have a diameter of 70 mm, and the density can be adjusted. Ledpfxez R Sulj Ahaoah The system requires repairs: the chrome plating on the clamping chuck is worn off. Since the system has not been in operation for 12 years, the electrical system needs to be overhauled, and the mechanical components need to be serviced. I would assist with the dismantling; a forklift is available.

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE COMPACT series Stationary Concrete Batching Plants provide satisfaction of all levels need with practical and effective solutions. Stationary concrete batching plants can easily and efficiently reach high capacity production of homogeneous concrete mixture. COMPACT series have easy operating system and lowest investment costs. In addition, the plant provides the use of enterprise resources accurately, so that gaining time-saving will transform to more earnings. TECHNICAL SPECIFICATIONS: Model: COMPACT 60 Production capacity: 60 m3 Mixer type: Twinshaft mixer 1 m3 Cement weighing: 600 kg Laedpjz Sqt Usfx Ahaoh Additives weighing: 30 kg Water weighing: 250 kg Cement silo is optional. COMPACT-60 consists of: • Aggregate Storage Bunker • Aggregate Weighing Hopper • Aggregate Weighing Conveyor • Aggregate Transfer Conveyor or Bucket System • Twinshaft Mixer • Mixer Chassis, Walking Platforms, Ladder • Water Weighing Hopper • Cement Weighing Hopper • Admixture Weighing Hopper • Air Compressor • Cement Screw Conveyor • Bolted Cement Silo • Top Filter, Safety Valve and Accessories • Control Cabinnet with Air Conditioner • PC and Automation System • Control and Power Panel FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, axle configuration: 3 axles, first registration: 06/2013, total length: 9,900 mm, total width: 2,500 mm, total height: 3,900 mm, suspension: air, tire size: 385/65R22,5, color: other, = Additional Options and Accessories = - Aluminum Wheels = Notes = Laodez I Nfmspfx Ahash Number of axles: 3, Tare weight: 5890 kg, Gross vehicle weight: 39000 kg, Chassis type: Complete chassis, Aluminum wheels, Suspension type: Air suspension, Body construction year: 2013, Body material: Aluminum, Drum volume: 39000, Compartment layout: 1 compartment, Type of load: Silo, Axle type: BPW = Additional Information = General Information Cab: Day cab License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle Configuration Tire size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Tire tread depth left: 9 mm; Tire tread depth right: 5 mm Axle 2: Tire tread depth left: 7 mm; Tire tread depth right: 11 mm Axle 3: Tire tread depth left: 8 mm; Tire tread depth right: 9 mm Weights Unladen weight: 5,890 kg Payload: 33,110 kg GVW: 39,000 kg Environment Emission class: Euro 0 Condition Overall condition: average Technical condition: average Optical condition: average Damage: none = Company Information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractors, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing inventory • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: new, functionality: fully functional, power: 55.16 kW (75.00 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 5,500 kg, lifting height: 5,499 mm, tire size: 16x70-20, number of seats: 1, shovel volume: 1 m³, Year of construction: 2026, Equipment: additional headlights, adjustable boom, all wheel drive, hydraulics, onboard computer, standard shovel, The HZM 825-T Profi is the flagship model in the HZM telehandler series, offering maximum performance, maximum reach, and maximum reliability. Powered by the robust Yunnei diesel engine with 75 hp / 55 kW and Bosch common-rail high-pressure injection, it achieves a tipping load of 4,050 kg at the attachment point and a lifting height of 4,541 mm – figures that other telehandlers in its class cannot match. The operating weight of 5,500 kg ensures maximum stability, even with the telescopic arm fully extended and carrying the maximum load. As standard, the machine is equipped with a 1.0 m³ standard bucket with a Euro attachment and a hydraulic quick-change system for tool-free attachment changes from the driver's seat. With a lifting height of 4,541 mm, the HZM 825-T Profi reaches areas that are usually reserved for cranes or forklifts: truck loading ramps, building openings on the third floor, high warehouses, and agricultural silos. The powerful torque converter transmission with powershift function ensures powerful, smooth movements even under maximum load, and the electronically controlled reversing switch on the joystick enables quick changes in direction without having to move your hand. The fully equipped cabin offers a sprung comfort seat, heating, ventilation, windshield wipers with a washer system, lockable doors, and a standard rearview camera. A complete LED lighting system with main and work headlights, as well as a rotating beacon, enables operation even in the early morning and during night shifts. Rear hydraulics and a 13-pin socket according to EU standards for trailers and electric tools are also included as standard. The machine is CE-certified according to EU Machinery Directive 2006/42/EC and complies with the EN 474 standard for earth-moving machinery. Each machine undergoes a complete quality and function test before delivery. The scope of delivery includes the COC document for straightforward road approval. For operation on public roads, a driver's license of class L (up to 25 km/h) is sufficient; no driver's license is required on private property. A 2-year manufacturer's warranty is included. Technical data: Lodpfx Ahoz Sr Tvsajah Feature Value Engine Yunnei DEF20CAF4, Diesel, Bosch Common-Rail Engine power 55.8 kW / 75 hp Max. torque 320 Nm Drive type Torque converter with powershift, 2 forward gears Maximum speed 20 km/h Fuel tank 98 l Hydraulic tank 95 l Max. hydraulic pressure 180 bar Max. hydraulic flow rate 120 l/min Operating weight 5,500 kg Tipping load at the attachment (machine level) 4,050 kg Standard bucket 1.0 m³ Lifting height (telescopic arm, lower edge of bucket) 4,541 mm Turning radius inside / outside 1,892 mm / 4,043 mm Equipment / Highlights: Full cab with heating, ventilation, rearview camera; sprung comfort seat; adjustable steering wheel; LED main and work headlights; rotating beacon; windshield wiper/washer system; electronic Profi joystick for driving, telescopic function, and hydraulic circuit; Euro quick-change system with pressure relief; 3rd/4th hydraulic circuit with continuous pressure function; rear hydraulics with 13-pin socket; Powershift function (automatic neutral position when braking); floating position; hydraulic auxiliary oil cooler; lockable doors. Scope of delivery: HZM 825-T Profi including Euro attachment & 1.0 m³ standard bucket, German operating manual, COC documentation, 2-year mobile warranty with free choice of workshop, invoice with VAT shown. Financing/Leasing: Available upon r

Condition: used, mileage: 231,435 km, power: 257 kW (349.42 HP), first registration: 02/2005, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 6x2, wheelbase: 4,500 mm, fuel: diesel, color: green, gearing type: automatic, number of gears: 12, emission class: euro3, suspension: steel-air, loading space volume: 15 m³, Equipment: electric window regulation, Technical information Number of cylinders: 6 Engine capacity: 10.520 cc Drivetrain Drive: Wheel Engine type: MAN D2066 LF Transmission Transmission: 12AS, 12 gears, Automatic Axle configuration Tyre size: 315/80R22,5 Front axle: Suspension: leaf suspension Rear axle 1: Double wheels; Suspension: air suspension Rear axle 2: Steering; Suspension: air suspension Weights Empty weight: 11.920 kg Carrying capacity: 14.080 kg GVW: 26.000 kg Functional Make of bodywork: LAMBRECHT Lasdez I Rv Tjpfx Ahaeh Number of compartments: 5 = Additional options and accessories = - PTO

Condition: good (used), mileage: 911,051 km, first registration: 06/2016, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 4x2, wheelbase: 3,700 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,020 mm, total width: 2,550 mm, total height: 4,010 mm, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking air conditioner, parking heater, power mirror, retarder, seat heater, tachograph, traction control, = Additional Options and Accessories = - Heated mirrors - Digital tachograph - Fixed - Halogen lamp - Compressor - Alloy wheels - Manual - Auxiliary drive - Radio/cassette - Lane keeping assist - Fabric - Topline - Auxiliary braking system = Notes = Number of axles: 2, Configuration: 4x2, Tare weight: 9100 kg, Gross vehicle weight: 19000 kg, Total tank capacity: 700 liters, Saddle coupling height: 115 cm, Saddle coupling: Fixed, Number of locks: 1, Winch pulling capacity: 12 tons, Alloy wheels, Suspension type: Air suspension, Type of cabin: Topline, Cruise control, Tachograph (control unit), Digital tachograph, Air conditioning, Stationary air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, GPS navigation, Color: White, Heated mirrors, Type of lighting: Halogen lamp, Lane keeping assist, Air conditioning, Seat heating, Bluetooth, Engine displacement: 16353 cc, Fuel: Diesel, Euro: 6, Transmission type: Opti-cruise, Transmission type: Scania, Gears: 12, Auxiliary braking system, Retarder brand: Scania, Power steering, ABS, ASR, Compressor, Auxiliary drive, PTO type: 1, Central locking, Seat configuration: 1+1, Seat cover: Fabric, Seat adjustment: Manual, GHH silo compressor = Additional Information = Transmission Transmission: SCA, 12 gears, Automatic Axle Configuration Brakes: Disc brakes Axle 1: Tire size: 385/65R22.5; Steered; Tire tread depth left: 6 mm; Tire tread depth right: 8 mm; Suspension: Leaf spring suspension Axle 2: Tire size: 315/70R22.5; Dual tires; Tire tread depth left inner: 4 mm; Tire tread depth left outer: 5 mm; Tire tread depth right inner: 7 mm; Tire tread depth right outer: 8 mm; Suspension: Air suspension Weights Unladen weight: 9,100 kg Payload: 9,900 kg GVW: 19,000 kg Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Identification License plate: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large and rapidly changing inventory • Recognizable quality Laodpjzwc D Dofx Ahajh • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is arranged quickly • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Calculate your leasing rate quickly and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: used, axle configuration: 3 axles, first registration: 08/2005, total length: 11,000 mm, total width: 2,550 mm, total height: 3,750 mm, suspension: air, tire size: 385/65 R22.5, color: other, Equipment: ABS, = Additional options and accessories = - Air suspension - Disc brakes - Lift Axle = More information = Lsdpfx Aez Tc R Uehajah General information Year of construction: 2005 Registration number: BD795RR Axle configuration Tyre size: 385/65 R22.5 Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle Rear axle 2: Steering Weights Empty weight: 7.440 kg Carrying capacity: 30.560 kg GVW: 38.000 kg

Condition: used, Smicon AFT 2/1500 Fumigation / Fumigation System Fumigation involves filling a space with a toxic gas to combat pests/bacteria. Because toxic gases are used, special safety measures are required. Fumigation is commonly used in the storage of organic materials (e.g., grain storage, in warehouses in ports, silos, mills), and also in churches to control woodworm. This is a device used for disinfecting rooms. Formaldehyde is heated on the left hotplate and, together with condensed water (right hotplate), is placed into a room via an airflow, where it kills all bacteria. Former list price: €10,900 net You can find more new and used items in our shop! International shipping costs available upon request! Laodpfedviynex Ahaeh Item condition: used

Condition: used, Smicon FTA 1500U-6L Fumigation / Fumigation System Fumigation involves filling a space with a toxic gas to control pests/bacteria. Because toxic gases are used, special safety measures are required. Fumigation is commonly used in the storage of organic materials (e.g., grain storage, in warehouses in ports, silos, mills), and also in churches to control woodworms. This is a device used for disinfecting spaces. Formaldehyde is boiled on the left hotplate and, together with condensed water (right hotplate), is placed in a room in an airflow, where it kills all bacteria. Former list price: €9,900 Item condition: used Lasdodviyxspfx Ahash You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, axle configuration: 3 axles, first registration: 08/2013, total length: 100,000 mm, total width: 2,550 mm, total height: 3,800 mm, suspension: air, tire size: 385/65R22,5, color: other, Equipment: ABS, = Additional Options and Accessories = - EBS = Notes = Number of axles: 3, Tare weight: 5020 kg, Gross vehicle weight: 39000 kg, Chassis type: Incomplete chassis, Chassis material: Aluminum, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, EBS, Body construction year: 2013, Drum volume: 39, Drum volume in: m3, Compartment division: 1 compartment, Cargo type: Silo, Axle type: MERCEDES-BENZ = Further Information = General Information Cab: Day cab License plate: KLEYN1 Powertrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle Configuration Tire size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Lodpszqaffefx Ahasah Axle 1: Tire tread depth left: 8 mm; Tire tread depth right: 5 mm Axle 2: Tire tread depth left: 4 mm; Tire tread depth right: 4 mm Axle 3: Tire tread depth left: 4 mm; Tire tread depth right: 6 mm Weights Unladen weight: 5,020 kg Payload: 33,980 kg GVW: 39,000 kg Environment Emission class: Euro 0 Maintenance APK (Periodic Technical Inspection): valid until 08.2027 Condition Overall condition: average Technical condition: average Optical condition: average Damage: none = Company Information = Kleyn Trucks is one of the largest independent used vehicle dealerships in the world. Here, you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various production years and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The assurance of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry through our website. Inquire directly about our European warranty package.

Condition: used, Year of construction: 2006, operating hours: 22,000 h, functionality: fully functional, EQUIPMENT FOR TRANSPORT AND MANIPULATION OF RAW MATERIALS The equipment consists of:  Mercedes Actros container truck  Two containers with a volume of 10 to 20 m3 for sawdust  Liebherr bulk loader Equipment condition:  In good condition EQUIPMENT FOR THE PREPARATION OF RAW MATERIALS The equipment consists of: Ljdpfx Ahoz I Tm Ueaeah  Waste bin with movable floor - volume approx. 10 m3  Pneumatic transport systems with filter  Conveyor belts and augers  Sawdust dryer with biomass burner  Hammer mill for chopping wood chips with associated equipment  Control cabinets for each piece of equipment Capacity of the complete plant:  About 2 t/h of dried sawdust Equipment condition:  Completely overhauled BRIQUETTING PRESS WITH SAW AND PACKING UNIT Full capacity is 3,5T/h A complete briquetting line consisting of the following:  Briquetting press BP6000 CFN consisting of: o Silos for raw materials o Dosing screw o Oil and press head cooling system o Original press head and cooling line for briquettes with a diameter of 90 mm for hardwood o Manual and automatic control system o Current condition: the press has been 100% serviced and all vital parts of the press have been changed so that it is like new ones o Large quantity of spare parts in stock including spare axle and eccentric  Saw for cutting briquettes BRIDGE o Current condition: the equipment has been fully serviced  Automatic packaging machine for briquettes ROSMAN o Current condition: the equipment has been completely serviced and a new control cabinet has been made