Used Slewing Ring for sale (43,337)

Condition: good (used), Powered roller conveyor which can be turned at right angles (90 degrees) by motor drive - second-hand - Price (net) ex location: only 1.500.-€, dismantled and loaded! Manufacturer: should be Siemens Dematic Year of manufacture: Type: Length of the roller conveyor: approx. 1,645m Width element approx. 75cm roll length: approx. 60cm roll width: approx. 5cm Distance between the rollers approx.: approx. 5cm Ijdjfwr Tzspfx Acuoih height: approx. 55cm Motor: SEW Length of frame: one side approx. 2m, other side unknown (but can be changed anyway due to the aluminium profiles condition: good Available: immediately Location: Zwickau, later warehouse Frankenberg (Saxony)

Condition: used, toothed belt pulley, Slewing ring -Slewing ring: with toothed belt pulley -Slewing ring: Ø 520 mm Isdpfx Acsgyg Anoujih -Pulley: Ø approx. 370 mm -Belt width: 80 mm -Sockets: bolt circle Ø 490 mm Ø 18 / M16 -Measurements: see photos -Dimensions: Ø 520 x 200 mm -Weight: 79 kg

Condition: used, Slewing bearings, slewing ring, single row ball slewing ring, four-point bearings -Comes from: HUSS Rides manufacturer of leisure facilities -Spare part: from Iisdpfx Ajcgf Ryocueh -Manufacturer: Rothe Erde -Type: 060200504-000 -Outer diameter: 576 mm -Interior diameter: 429 mm -Height: 50 mm -Number: 1x bearings available -Price: per piece -Weight: 42 kg

Condition: new, LVA0200, Franke, steel rotary joints Model: LVA0200 Iedjt Tw Txspfx Acuoih Condition: New

Condition: used, Slewing bearings, slewing ring, single row ball slewing ring, four-point bearings -Comes from: HUSS Rides manufacturer of leisure facilities -Spare part: from Top Junior 70011-15 -Manufacturer: Rothe Erde -Type: 2-060-40-0490-001 63132-609 -Type: 2.060.40.0490.001 63132.609 -Outer diameter: 625 mm -Inner diameter: 354 mm -Height: 90 mm Iodpfx Aocgf R Docuoih -Number: 3x bearings available -Price: per piece -Weight: 122 kg

Condition: used, Slewing bearings, slewing ring, single row ball slewing ring, four-point bearings -Comes from: HUSS Rides manufacturer of leisure facilities -Spare part: from Flic Flac connection from gondola Iodpfxscgf R Ao Acujih -Manufacturer: IMO -Type: 001625 -Type: IMO 33/95 -Outer diameter: 624 mm -Inner diameter: 355 mm -Height: 98 mm -Number: 2x bearings available -Price: per piece -Weight: 118 kg

Condition: used, Slewing bearings, slewing ring, single row ball slewing ring, four-point bearings -Comes from: HUSS Rides manufacturer of leisure facilities -Spare part: from -Manufacturer: INA -Type: VLA200544-N -Outer diameter: 640.3 mm -Interior diameter: 434 mm -Height: 56 mm -externally toothed -Teeth: 105 -Module: 6 mm -Number: 6x bearings available Iisdecghhkspfx Acujh -Price: per piece -Weight: 39 kg/piece

Condition: excellent (used), functionality: fully functional, machine/vehicle number: B0xanbytvo, power: 35 kW (47.59 HP), TSF Ring die pellet machine Automatic bearing lubrication system Cooled differential Air conditioning Control cabinet Efficiency (depends on material) Engine power 35kw Different diameters of the pellet (selectable) B0xanbytvo Diameter of pellet press ring die - 8 mm Material requirements before adding to the pellet press - humidity 8-16% Motor principal cu inverter Electric parameter correlation board with numerical control. Iiodpfxsq A Uhwj Acuoh

Condition: used, PLC control, supply unit, converter, power module, U/E module, digital power amplifier -Manufacturer: Hydraulik Ring, digital power amplifier -Type: VRD 350 Iiedpfxogk Dy Ts Acueh -Voltage: 24 V -Dimensions: 220/80/H130 mm -Weight: 0.8 kg

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: B500-1091-05 / 705-05, operating temperature: 110 °C, water tank capacity: 1,500 l, Equipment: documentation/manual, TECHNICAL DETAILS Capacity: 400 l/h Iodpjw Nn Slofx Acujih Volume: 1,500 dm³ MACHINE DETAILS Operating pressure: -0.025 bar / +0.49 bar Operating temperature: 0/110 °C EQUIPMENT With tank Piping Control cabinet Operating manuals

Condition: used, GS Mach approx. 6.5" extruder with Water Ring Pelletizer, with Water Ring Pelletizer, spin dryer, screen changer, and hopper, includes all control panels, 177 HP, 3 phase motor, also includes Color Feeder, in working condition, winning bidder responsible for proper disconnection and removal. Iiedpsxd D Nnefx Acush

Condition: used, Year of construction: 2011, Factory no.: LE 20.779, jib length: 50 m, max. lifting capacity: 5,000 kg / at the tip 1,350 kg, comprised of: slewing platform with cabin, counter-jib, jib foot section, various jib sections, trolley, 2 assembly platforms, radio remote control, counterweights: 6 x A at 1,450 kg each / 2 x B at 1,000 kg each / 1 x C at 500 kg, inspection log / further documents available, collection: on 27.11.2025 Iisdsxnafyjpfx Acujh

Condition: used, offer consists of: Iijdpfx Asu S Af Njcueh 1x Hohner 43/6 S ring eyelet stitching head suitable for any kind of booklet maker / saddle stitcher We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, • Load capacity 350 kg • 6 vacuum suction cups, 250 mm diameter, adjustable • Vacuum lifter can rotate 90° and tilt 90° Iiedpfx Acoxnvq Esueh • Suction cups with guide tube and electric trolley • 4 units available, brand new and unused • Immediately available IV: + Design Standards 1. The construction of the unit strictly complies with European CE standard EN13155:2016, American ASME (Mechanical Engineering Association) B30-20-2006, and German UVVI8 regulations. The key design parameters exceed the requirements of the aforementioned standards. 2. Safety factor: The main structure features a factor of 4.0, vacuum safety level is 65%, and the standard safety level is 85%, which is 20% above the standard safety requirement. V+ Equipment Inspection and Standards 1. General Check that all materials are complete, inspect if the equipment exterior is painted or scratched, check for damage to the suction cups and pipes. 2. Pre-shipment Inspection © Equipment suction test © Equipment pressure holding test © Alarm system test © Various control components • Price on request

Condition: used, Wall-mounted slewing jib crane DEMAG type KBK 2 Demag no. jib: KBK- 982 040 44 Demag no. wall bracket : 85104044 Year of construction 2000 Lifting capacity: 500 kg Outreach: 4000 mm Swivel range 270° Wall mounting plate: 1170 x 440 mm Height of lower boom to upper wall bracket: 1000 mm Flange plate wall bracket to center of bolt: 270 mm Total length of wall bracket flange plate to jib tip: 4330 mm: Iiedpfjtqwrvox Acuoh - Cantilever profile C-profile scissor lift DEMAG KBK 2 - Carriage for DEMAG KBK 2 C-profile trolley - Original paint yellow dead weight 170 kg very good condition Price without chain hoist - chain hoist or crane can also be found in the store.

Condition: used, Polystruder Extruder with Berringer water ring Pelletizer, 250 HP, 3 phase motor, with screen changer, includes spin dryer, and hopper. Iisdpfxsxd D I Dj Acueh

Condition: used, Year of construction: 1997, Serial no.: LE 40.290, outreach: approx. 60 m, max. lifting capacity: 6,000 kg / at the tip 1,400 kg, consisting of: slewing platform with cab and tip, counter-jib, trolley, tie bars, 1 assembly platform, 1 cab platform, various jib sections with tip, counterweights: 7xA at 2,580 kg each, 1xB at 1,600 kg, inspection book/other documents available, pickup: on 24.11.2025 Iijdpfexnaf Tjx Acuoh

Condition: used, 1x Hohner Loop Stitching Head 43/6 The Hohner Loop Stitching Head 43/6 is a high-quality stitching head specifically designed for professional loop stitching of brochures and other printed products. This stitching head offers reliable performance and precise loop stitching. - Key Features: - Specifically designed for loop stitching - Minimum distance between stitch centers: 48-54 mm - Compatible with various collating systems (e.g., Horizon, Duplo, Bourg) - Suitable for wire gauges No. 24-26 (0.6-0.5 mm) or No. 26-28 (0.5-0.4 mm) - Available loop sizes: 6 mm or 8 mm inner diameter - Maximum stitching thickness: 3 mm (6 mm loop) or 2 mm (8 mm loop) Iedow Ew Aaopfx Acueih - Easy operation and tool-free adjustment - Compact design for easy integration into existing systems Technical Specifications: - Net weight: Approx. 1.5 kg - Crown width: 12 mm - Compatible with round wire

Condition: used, Year of construction: 2001, Serial no.: LE 42.130, jib length: approx. 45 m, max. lifting capacity: 5,600 kg / at the tip: 1,300 kg, consisting of: slewing platform with cab and counter-jib, trolley, counter-jib, various jib components with tip and tie rods, radio remote control, counterweights: 3xA at 3,250 kg each, 1xB at 1,500 kg, 1xC at 750 kg, inspection book/further documentation available, collection: on 26.11.2025 Iisdpoxnaf Hofx Acujh

Condition: used, offer consists of: 2x Hohner 52/8 ring eyelet stitching heads suitable for any kind of booklet maker / saddle stitcher We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs Iiedpfx Aew Ewy Eecush

Condition: used, Year of construction: 1998, Serial no.: LE 39.694, jib length: 55 m, max. lifting capacity: 8,000 kg / at the tip: 1,550 kg, consisting of: slewing platform with cab and jib tip, radio remote control, trolley, counter-jib with tie rods, various jib sections with tip, 1 assembly platform, counterweight: 4xA at 2,580 kg each, 1xB at 1,600 kg, documentation/test book available, collection: on 01.12.2025 Iisdpfx Acjxnalteush

Condition: used, offer consists of: 2x Hohner 48/5 S ring eyelet stitching heads suitable for any kind of booklet maker / saddle stitcher Iodpfow Ewy Sex Acueih We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, Year of construction: 2001, Serial no.: LE 42.448, jib length: 60 m, max. lifting capacity: 6,000 kg / at the tip: 1,600 kg, comprising: slewing platform with cab and tip, 1 cab platform, trolley, counter jib, tie rods, 2 assembly platforms, various jib sections with tip, counterweight: 7xA at 2,500 kg each, 1 supply cable with strain relief, 1 wind-free cable, additional documentation available, no inspection book available, collection: on 02.12.2025 Iodpoxnalysfx Acusih

Condition: used, offer consists of: 2x Hohner 48/5 S ring eyelet stitching heads suitable for any kind of booklet maker / saddle stitcher - weight: 5,4kg Isdpfxju Srxus Acuoih We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, Year of construction: 2006, Works number: 84.825, jib length: 20 m, current hook height: approx. 29 m (tower sections: 2x12 m / 1x4 m), ATTENTION: the 4 m tower section is not included in the scope of sale, it is third-party property. Tower system: 63 LC, max. lifting capacity: 5,000 kg. Comprising: slewing platform, jib, counter-jib, counter-jib platform, tower platforms, 4x counterweight ballast, radio remote control. Emergency stop function on the remote control is inoperative, wind-off function inactive. Crane is installed on foundation anchors within the elevator shaft. No inspection log book or further documentation available. Dismantling and removal only by qualified personnel or specialist company. Proof of qualification must be provided before collection! Construction site is located in the city center. Permit from local authorities must be applied for prior to collection. The current lessee can assist with the exchange of contact details. Viewing possible by arrangement with the current lessee. The crane is expected to be in use until January 2026. Collection by arrangement only! Iijdjxnab Uepfx Acush