Used Slewing Ring for sale (40,375)

Condition: new, shaft diameter: 30 mm, input voltage: 230 V, roll diameter: 30 mm, - Shaft diameter 30 mm - Rotates clockwise and counterclockwise - Emergency stop - With 1 set of standard castors Nlodpfxor Rug Hj Agzok - With 1 set of plastic rollers for pipe 16 and 50 mm - Documentation - 230V

Condition: used, • Load capacity 350 kg Nlodpfx Aoxnvq Eegzsk • 6 vacuum suction cups, 250 mm diameter, adjustable • Vacuum lifter can rotate 90° and tilt 90° • Suction cups with guide tube and electric trolley • 4 units available, brand new and unused • Immediately available IV: + Design Standards 1. The construction of the unit strictly complies with European CE standard EN13155:2016, American ASME (Mechanical Engineering Association) B30-20-2006, and German UVVI8 regulations. The key design parameters exceed the requirements of the aforementioned standards. 2. Safety factor: The main structure features a factor of 4.0, vacuum safety level is 65%, and the standard safety level is 85%, which is 20% above the standard safety requirement. V+ Equipment Inspection and Standards 1. General Check that all materials are complete, inspect if the equipment exterior is painted or scratched, check for damage to the suction cups and pipes. 2. Pre-shipment Inspection © Equipment suction test © Equipment pressure holding test © Alarm system test © Various control components • Price on request

Condition: used, Wall-mounted slewing jib crane DEMAG type KBK 2 Demag no. jib: KBK- 982 040 44 Demag no. wall bracket : 85104044 Year of construction 2000 Njdetqwrvepfx Agzjlk Lifting capacity: 500 kg Outreach: 4000 mm Swivel range 270° Wall mounting plate: 1170 x 440 mm Height of lower boom to upper wall bracket: 1000 mm Flange plate wall bracket to center of bolt: 270 mm Total length of wall bracket flange plate to jib tip: 4330 mm: - Cantilever profile C-profile scissor lift DEMAG KBK 2 - Carriage for DEMAG KBK 2 C-profile trolley - Original paint yellow dead weight 170 kg very good condition Price without chain hoist - chain hoist or crane can also be found in the store.

Year of construction: 2005, condition: excellent (used), Horizontal automatic wrapping machine for narrow size products Fully automatic wrapping cycle with two standard cycles: Nljdspfdh Njpfx Agzok - total wrapping - head and tail wrapping TECHNICAL DETAILS see prospect) complete plant with rollerways and return piece to the operator Very good conditions

Condition: good (used), Year of construction: 2021, machine/vehicle number: 2105261-01, Offer 25388 Technical Data: - Load capacity 1000 kg - Electric chain hoist VETTER Njdpfx Agoxt Iq Ijzolk - 2 lifting speeds 4 + 1 m/min - Jib outreach approx. 2000 mm - Jib arm IPE 220 - Hook height approx. 2700 mm - Slewing radius 360° - Total height approx. 3300 mm - Baseplate of column / pedestal approx. 1400 x 1400 mm - Total length approx. 2900 mm - Total weight approx. 4400 kg - Connection 400 V / 32 A

Condition: ready for operation (used), Year of construction: 2020, Shaft bottom/top: 30mm/30mm, max. round tube length: 48mm, max. round tube diameter: 3mm, max. flat bar dimensions X/Y: 50mm/10mm, max. square tube dimensions X/Y/Z: 40mm/30mm/3mm, weight: approx. 200kg. Documentation available. An on-site inspection is possible. Nsdpfxsxt Rmrs Agzelk

Condition: new, shaft diameter: 80 mm, - Ring bending machine Nledpfx Ageg Sr I Uszjk - Shaft diameter 80 mm - Lower two rollers are moved hydraulically - Three rollers driven - Hydraulically adjustable guide rollers - 2 digital displays - Brake motor - Can be used horizontally/vertically - Mobile control panel - Emergency stop - Documentation - 400V

Year of construction: 1985, condition: excellent (used), machine/vehicle number: AV, 1 Demag / AV Auguste Victoria Pillar Crane 500 KG payload / lifting load Crane is about 10x available. Outreach 4-5m, 500 KG payload. Also available with 2 outriggers !!!!! PLEASE INQUIRE - pictures by email Technical specifications : Payload at full reach max 500 KG / 0.5 to Overall height 4.5m, outreach 4-5m, boom 3,7m, hook height 3m Weight completely approx. 1400 Kg with 500KG Demag PK2 / PK5 (1000Kg) chain hoist, 500V Year of construction approx. 1980-1995 Complete with pillar, outrigger, chain hoist, cable tow, landing gear and small parts Swivel range approx. 270 ° Item location is 75053 Gondelsheim Nlsdped Dfp Tofx Agzok Plant is completely dismantled and immediately available See pictures Shipping by forwarding or pickup Please ask for shipping costs by postal code

Condition: used, Impact ring wrench. 5134 Make Stahlwille 120 he Nodpfsdbc E Dex Agzslk 85 and 115 he key also in stock

Condition: new, Ostas Profile Ring Bending Machine OPK 125 Technical Specifications: • Tool holder, shaft: 120 mm • Tool: 390 mm • Working speed: 2-7.5 m/min • Motor: 15 kW • Dimensions (L-W-H): 2000 x 1700 x 1950 mm • Weight: 4850 kg • 3 rollers are driven separately by a hydraulic motor and planetary gearbox • Hardened standard rolls • Hardened and ground tool holder, shaft Nedpsxrd Rnsfx Agzelk • Mobile control panel • Horizontal and vertical working position • Hydraulic side supports • Digital displays (2 pcs.) • In accordance with CE standard

Condition: excellent (used), Bridge crane, indoor crane, disc brake, crane brake, disc, drum and storm brakes, overhead crane brake, brake ring, conical brake disc Nljdpfxexc Ev Hj Agzsk -Manufacturer: Demag, brake ring conical brake disc unused -Type: KB 160 RIW -Dimensions: see photos -Dimensions: Ø 275 x 40 mm -Weight: 1.0 kg

Condition: used, Year of construction: 2020, 🧰 Product Features • Manufacturer: Vetter • Model: MOB12-PR5-2.0 • Condition: used • Color: yellow, anthracite • Year of manufacture: 2020 • Load capacity: 500 kg • Outreach: 2000 mm • Pivot point to end of jib: 2200 mm • Underside of jib: 2500 mm • Overall height: 2730 mm • Base area: 1240 x 1360 mm • Slewing range: 360° degrees • Lifting speed: 4.5 / 1.1 m/min • Operating voltage: 400 V • Control voltage: 24 V Nlsdpfx Agsw Uqckozsk • Total weight: 2198 kg • Max. wheel load: 844 kg • Max. support load: 1656 kg • Lifting height: 480 mm • EN 13001 Hoist class: HC2 • EN 13001 Stability class: S2 • Pockets for forklift transport available. • Lugs for overhead crane transport available. 💰 Price € 7,200 net, excluding VAT • Quantity discount: on request • Shipping costs: Europe-wide, on request • Delivery time: available immediately • Inspection and collection: possible at any time by appointment Always over 5,000 linear metres of pallet racking from various manufacturers in stock (Specifications, details, and prices subject to change and error. Intermediate sale reserved! See our terms and conditions. All prices ex works, excl. VAT.)

Condition: used, Profile ring bending machine with manual crank drive, year of construction approx. 1950 Lower rollers Ø 56 mm with grippy knurling Lower roller width: 115 mm Upper roller Ø 100 mm Nodpfjxbtx Hsx Agzolk Upper roller width: 110 mm - Symmetrical roller arrangement with 2 driven lower rollers - Upper roller adjustment 55 mm via threaded spindle - Manual crank drive with 6:1 gear ratio Required space (L x W x H): 440 x 660 x 1000 mm Weight: approx. 200 kg

Year of construction: 2008, condition: excellent (used), machine/vehicle number: NE151/91, 1x Mobile traveling crane Column-mounted slewing jib crane Traveling crane Type Vetter Mobilus 2,5-3.0 BJ 2008 Payload at full outreach 250 KG / 0.25 tons Overall height: approx. 2.75m, outreach: approx. 3m Hook height: approx. 2.15m, lower edge of boom 2.3m Column with counterweight incl. chain hoist, cable tow and accessories with Demag DC chain hoist Weight complete approx. 2700 kg Connection to 400V, swivel range 360 Very good condition, fully functional. Item location is 75053 Gondelsheim Only the crane system shown in the pictures is for sale See pictures Nljdpfx Agjrwkahezek Shipping by forwarding agency or pickup

Condition: used, Impact ring wrench. 5135 Make Stahlwille Nedpfodbc E Esx Agzjlk 85 he

Condition: new, Ostas Profile Ring Bending Machine OPK 105 Technical Specifications: • Tool holder, shaft: 100 mm • Tool: 315 mm • Working speed: 7 m/min • Motor: 7.5 kW • Dimensions L-W-H: 1980 x 1450 x 1650 mm • Weight: 3130 kg • 3 driven rolls • Hardened standard rolls • Hardened and ground tool holder, shaft • Mobile control panel • Horizontal and vertical working positions Nljdpfexrd H Nex Agzok • Side angle guide rolls • Digital displays (2 pcs.) • Brake motor • Compliant with CE standard

Condition: excellent (used), Bridge crane, indoor crane, disc brake, crane brake, disc, drum and storm brakes, overhead crane brake, brake ring, conical brake disc -Manufacturer: Demag, brake ring conical brake disc unused -Type: 628 626 44 RIW -Dimensions: see photos -Dimensions: Ø 310 x 40 mm Nlodpfxoxc Eupj Agzek -Weight: 0.9 kg

Condition: good (used), Year of construction: 2003, Wampfler GS 21-05/1812/04ML/LT Slip Ring Assemblies GS 21 Technical Details: • Manufacturer: Wampfler • Type: GS 21-05/1812/04ML/LT • Year of Manufacture: 2003 • Protection Class: IP54 • Design: 4 × 250 A + PE (660 V), 12 × 25 A (690 V), 4 × 20 mA (10 V) Description & Application: Slip ring assemblies for the safe transmission of power and signals in rotating applications, including: • Crane systems • Lifting and conveyor technology • Wind turbines Nedpfx Agoxl Avpszslk • Mechanical engineering Condition: Used (see pictures). Note: For detailed technical specifications and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. Find more items – new and used – in our shop! International shipping costs upon request!

Condition: used, 3-Roller Ring Bending Machine CONZ Type UM 7-4 Motor no.: 1331455 Year built: ca. 1970 Roll diameter, drive roller: 60 mm Roll diameter, adjustment roller: 68 mm Roll width, drive roller: 145 mm Roll width, adjustment roller: 105 mm Roll speed: 26 rpm Motor power: 0.75 kW Power supply: 380 Volt, 50 Hz Nedpfoxbtxyex Agzelk - Forward and reverse rotation - Top roller without swing bearing - Parallel adjustment of the lower rollers via threaded spindle - Vertical adjustment of the top roller via threaded spindle from below Required space (L x W x H): 950 x 520 x 1200 mm Weight: 200 kg

Year of construction: 1998, condition: excellent (used), machine/vehicle number: WIT33, 1 Pfeiffer wall slewing crane 2000 KG payload / lifting load Outreach about 6m, 2000KG 2to payload with Demag DC chain hoist 2000KG (2 lifting speeds) from BJ 2015 Trolley travel + swiveling electrically Total weight around 1800 kg Year of construction 1998 Crane is still being cleaned from the foundry dust Njdpok Iyqmsfx Agzslk Complete with wall brackets, outriggers, chain hoist, drag cable, chassis and small items Pivoting range approx. 180° Item location is 75053 Gondelsheim Plant is completely dismantled and immediately available See pictures Shipping by forwarding agent or pick-up Please inquire about shipping costs according to zip code

Condition: as good as new (ex-display), 10 ring bucks Load capacity 5 to. Nlsdpfxoccttbo Agzsk still several available

Condition: used, functionality: fully functional, Year of construction: 1976, machine/vehicle number: ROD109, 1 Demag KBK I wall-mounted slewing crane, 500 kg load capacity / lifting capacity Jib length 2 m, 500 kg load capacity with Demag DC chain hoist, load capacity 500 kg (year of manufacture 2007) Weight incl. wall bracket approx. 150 kg Nledpfexmuuyox Agzok Complete with chain hoist, cable trolley, travel carriage, and small parts Slewing range 270° Item location: 75053 Gondelsheim The system is fully dismantled and immediately available Shipping by freight carrier or collection Please enquire about shipping costs according to postal code

Condition: as good as new (ex-display), Rope guide ring Make steel type 8S Li unused from stock Njdpfx Agok D S Naozelk

Condition: used, Year of construction: 1976, machine/vehicle number: ROD47, 1 Demag KBK II wall-mounted slewing jib crane, 250 kg load capacity / lifting capacity Slew range 4m, 250 kg load capacity With Demag PK chain hoist, 250 kg capacity Njdpfx Asxmuutsgzolk Weight including wall bracket approx. 350 kg Complete with chain hoist, cable trolley, travel mechanism, and small parts Slewing range 270° Item location: 75053 Gondelsheim System is fully dismantled and immediately available Shipping by freight forwarder or collection Please inquire about shipping costs by postal code

Condition: excellent (used), Wall-mounted jib crane KBK Demag Load capacity 500 kg Jib 4600 mm Two lifting speeds: 5/1.25 m/min Nlodpfowln Itox Agzek