Used Smoke Generator for sale (12,436)

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 25734, Equipped with: Fanuc 150MB Control Hydraulic Chucking Work Spindle Large Bore Work Spindle #80 Taper Stock Divider Helical Motion Modified Roll Hansen Coolant Chiller & Filtration Coolant Tank & Pumps Chip Conveyor Chip Hopper Reven Mist Collector Hydraulic System Transformer Cutter Bolt Work Light Operator Platform Hand Tools Documentation Nledpfx Agsxaqa Sszok Specifications: Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1 Full Depth: Maximum: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm) Face Width: Maximum: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm) Range of Tooth Numbers: 1-300 Inclusive Gear Pitch Diameter, Maximum: 1000 mm (39.37") Cutter Size, Maximum: 18" (diameter) Face Milling Cutter Size, Maximum: 350 mm (radius) Face Hobbing Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg. Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed) A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM B-Swinging Base: 0 to 30 deg./sec, N/A C-Cutter: 0 to 500 deg., Same X-Horizontal: +/-305mm (+/-12") Y-Vertical: +/-305 mm (+/-12") Z-Sliding Base: -25/+700mm (-1/+28") B-Root Angle: -5 Degree/+90 Degree Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper) Taper Per Foot:3/4", Same Depth of Taper Front:6", 152.40 mm Depth of Bore: 678 mm (26.7") Diameter of Taper Bore: 140 mm (5.5") Diameter Through Spindle of Hole:7.125", 180.98 mm MACHINE DIMENSIONS: Length x Width:233"x 209", 5920 mm x 5310 mm Height: 129", 3280 mm Weight: 65,000 lbs., 29,484 kg

Condition: used, Year of construction: 2000, Technical details: max. wheel diameter: 275 mm gear width: 55 mm max. module: 6,5 min. module: 1,5 Face Hobbing-Continious Process Continuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surface Nledpfx Agjv N Hilezjk C28 can do both, wheel + pinion. However, a C28 must be “prepared” for the individual part procedure. I.e. direct measuring system + part gear brake, workpiece axis + license file for the production of individual parts. *

Year of construction: 2006, condition: good (used), Power generator, emergency power generator, generator, power generator, power generator, emergency power generator -Electric start -Power: 3.8 kVA 50 Hz -petrol engine -only: 95 operating hours -2x Schuko: 230 Volt, 1 socket slightly damaged Nlodjflmm Sspfx Agzsk -Dimensions of unit: 580/530/H615 mm -Weight: 79 kg

Condition: used, Year of construction: 1997, max. wheel diameter 275 mm gear width 150 mm max. module 6 min. module 1.5 max. workpiece diameter 275 mm tooth width max. 5.5 mm spiral angle 0 - 60 ° number of teeth 5 - 120 transmission ratio min. 1:1 transmission ratio max. 1:10 milling drive motor 20 kW workpiece drive 14.5 kW total power requirement 62 kVA weight of the machine ca. 12 t dimensions of the machine ca. 4,7 x 4,387 x 2,45 m Tool spindle (D-axis) - workpiece spindle speed (infinitely) 60 to 350 r.p.m. Tool positioning axis (E-axis) - swivel range 0 to 360° - swivel speed max. 19.5°/s Workpiece spindle (B-axis) - mounting diameter outer cone (1: 4) 140 mm - standard internal cone (1:20) 99.218 mm - workpiece spindle speed max. 300 r.p.m. - workpiece spindle passage 90 mm Workpiece positioning axis (Y-axis) - travel 870 mm - speed max. 4.5 m/min Roller rotation axis (A-axis) - swivel range 315° - swivel speed max. 40°/s Axis intersection (Z-axis) - travel range max. +/- 50 mm - speed max. 0.657 m/min Workpiece swivel axis (C-axis) - swivel range -8.5 to 98° - swivel speed max. 21.5 °/s Milling depth axis (X-axis) - travel from -25 to 640 mm - max. speed 6 m/min Machinen distance (V-axis) Nedpfxsd Il R Ae Agzslk - travel 150 mm - speed max. 1.6 m/min - 13 milling cutters included -

Condition: ready for operation (used), Fuji Electric GGG 3226 A engine SN: M6091630Y2 with TG-21 tachometer generator, used, in good condition, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Nljdovxymispfx Agzok

Condition: excellent (used), Year of construction: 2023, fuel type: diesel, motor manufacturer: Kubota Z482, Field of application: Construction Empty weight: 1.010 kg CE mark: yes Technical condition: very good Visual appearance: very good Nlodpfsxl Uhqox Agzjk Voltage: 48 Delivery terms: EXW Transport dimensions (LxWxH): 2,25x1,4x2,44 Please contact Christian Theißen for more information Manufacturer: Generac Model: V20 Year of build: 2023 Condition: Used Data: Performance: 4x300W Low Voltage: 48 Volt Lamp type: LED Max. height: 8,50 m Engine: Kubota Z482 Alternator: Linz Drive type: Diesel Luminous life with one full tank: 140 Hours Operating noise: 58 dB(A) Transport dimensions: 2,25 x 1,40 x 2,44 m Dimensions when set up: 2,64 x 1,90 x 8,50 m Own weight: 1010 kg Special features: Digital controller, 3 doors, RLS, stabilizers with quick locking Location: 41468 Neuss: immediately available

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Nedpfxoruakgo Agzolk Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Condition: new, Year of construction: 2025, machine/vehicle number: 2541925, fuel type: diesel, motor manufacturer: Kubota V2203M, General information Field of application: Construction Weights Empty weight: 1.020 kg Functional Generator capacity: 20 kVA CE mark: yes Other information Fuel consumption: 3.8 Liter/Hour at 75% Load Generator: Leroy Somer TAL040-F Frequency: 50 Nsdpfx Ajx N Duwegzelk Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 150 l Transport dimensions (LxWxH): 2,04x1x1,406 Production country: ES Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information Stage V Generator Stage V Aggregaat Stage 5 Generator Stage 5 Genset Stage V Gen set Stage V Generator set EU Stage V Generator StageV

Condition: good (used), Year of construction: 1992, mobile welding smoke filter, welding smoke extraction, soldering smoke extraction -Drive: 1.6 kW -Connection: 220 V 50 Hz -Weight: 46 kg Nsdpfxeb A Sbmo Agzelk

Condition: good (used), Year of construction: 2012, fuel type: diesel, General information Field of application: Construction Weights Empty weight: 2.172 kg Functional Generator capacity: 60 kVA CE mark: yes Condition Technical condition: good Visual appearance: good Other information Fuel consumption: Diesel Delivery terms: EXW Water tank volume: 390 l Additional information Please contact Christian Theißen for more information Manufacturer: SDMO Model: R66C2 Year of build: 2012 Condition: Used Data: Performance: 60 kVA Engine: John Deere Nedjx H Nlijpfx Agzjlk Length: 234 cm Width: 108 cm Height: 190 cm Tank capacity: 39 l / Diesel Required connection: 2x 230 V/16 A, 1x 380 V/16 A, 1x 380 V, 63 Ao. Klemmleiste. Drive type: Diesel Operating noise: 88 dB Own weight: 2.172 kg Weight: betankt 2.500 kg Own weight: 2.172 kg Special features: Crane, consumption of approximately 14.75 liters per hour. On Weijer trailers Location: 41468 Neuss immediately available

Condition: new, Year of construction: 2025, machine/vehicle number: CATDE450ERZE00231, fuel type: diesel, motor manufacturer: Caterpillar C13, General information Field of application: Construction Weights Empty weight: 3.754 kg Functional Generator capacity: 450 kVA CE mark: yes Other information Fuel consumption: 69 Liter / Hour at 75% Load Nedpfx Aownwfyjgzelk Generator: Caterpillar A2955L41 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 721 l Transport dimensions (LxWxH): 4,773x1,63x2,357 Additional information Please contact Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information Caterpillar DE450GC Generator Set specifically designed for stand-by duty.

Condition: new, Year of construction: 2025, machine/vehicle number: CATDE110VN7E00802, fuel type: diesel, motor manufacturer: Caterpillar C4.4, General information Field of application: Construction Weights Empty weight: 1.213 kg Functional Generator capacity: 110 kVA CE mark: yes Other information Fuel consumption: 18.4 Liter per Hour at 75% Load Generator: Caterpillar SR500 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 166 l Transport dimensions (LxWxH): 2,76x1,03x1,58 Nledpfx Aev Sxzregzsk Additional information Please contact Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information Caterpillar DE110GC Generator Set specifically designed for stand-by duty. Including Coolant Heater and Battery Charger

Condition: new, Year of construction: 2025, machine/vehicle number: CAT000C9VLX905057, fuel type: diesel, power: 200 kW (271.92 HP), motor manufacturer: Caterpillar C9, General information Field of application: Construction Weights Empty weight: 2.859 kg Functional Generator capacity: 250 kVA CE mark: yes Other information Fuel consumption: 40.3 Liter / Hour at 75% Load Generator: Caterpillar LC5114H Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 500 l Transport dimensions (LxWxH): 3,981x1,41x2,032 Additional information Nlsdpfsukm Rnjx Agzsk Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information

Condition: new, Year of construction: 2025, machine/vehicle number: CAT0DE65CN7300532, fuel type: diesel, power: 52 kW (70.70 HP), motor manufacturer: Caterpillar C3.3, General information Field of application: Construction Weights Empty weight: 992 kg Nsdpfx Ajukm Rusgzolk Functional Generator capacity: 65 kVA CE mark: yes Other information Fuel consumption: 11.3 Liter per Hour at 75% Load Generator: Caterpillar SR500 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 103 l Transport dimensions (LxWxH): 2,3x0,96x1,4 Production country: CN Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information

Condition: new, Year of construction: 2025, fuel type: diesel, power: 264 kW (358.94 HP), motor manufacturer: Caterpillar C9, General information Field of application: Construction Weights Empty weight: 3.524 kg Functional Generator capacity: 330 kVA Nljdoupc N Depfx Agzsk CE mark: yes Other information Fuel consumption: 48.4 Liter / Hour at 75% Load with fan Generator: Caterpillar LC5114J Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 610 l Transport dimensions (LxWxH): 4,3x1,41x2,165 Production country: CN Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information

Condition: new, Year of construction: 2025, machine/vehicle number: CAT000C9LKX904811, fuel type: diesel, power: 240 kW (326.31 HP), motor manufacturer: Caterpillar C9, General information Field of application: Construction Weights Empty weight: 3.404 kg Functional Generator capacity: 300 kVA CE mark: yes Other information Fuel consumption: 46.9 Liter/Hour at 75% Load with fan Generator: Caterpillar LC5114J Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 610 l Transport dimensions (LxWxH): 4,3x1,41x2,165 Production country: CN Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information Nlodpjupc Nwsfx Agzjk

Condition: new, Year of construction: 2025, machine/vehicle number: XPD00285, fuel type: diesel, power: 248 kW (337.19 HP), motor manufacturer: Cat C9.3B, General information Field of application: Construction Weights Empty weight: 4.784 kg Functional Generator capacity: 310 kVA CE mark: yes Other information Fuel consumption: 62.6 Liter / hour at 100 % Load Generator: Cat LC5114N Frequency: 50/60 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 667 l Transport dimensions (LxWxH): 4,085x1,514x2,277 Production country: CN Additional information Please contact Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information Nedpet D Uhzjfx Agzslk - Noise Rating: 67.2 dB at 7m and 100% Load - Stage V / StageV / Stage 5 / Stage5 / EU Stage V / EU StageV / EU V / EU Five / Stage Five / EU Stage 5 / Tier IV Final / Tier 4 Final / EU Tier IV final

Condition: new, Year of construction: 2025, machine/vehicle number: XPJ00261, fuel type: diesel, power: 160 kW (217.54 HP), motor manufacturer: Caterpillar C7.1, General information Field of application: Construction Weights Empty weight: 4.487 kg Functional Generator capacity: 200 kVA CE mark: yes Other information Fuel consumption: 43.4 Liter / hour at 100% load Generator: Cat LC5100 Frequency: 50/60 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 822 l Transport dimensions (LxWxH): 4,085x1,42x2,35 Production country: CN Nledpfx Ajt D Uhuegzek Additional information Please contact Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information - Noise Rating: 64.6 dB at 7m and 100% Load - Stage V / StageV / Stage 5 / Stage5 / EU Stage V / EU StageV / EU V / EU Five / Stage Five / EU Stage 5 / Tier IV Final / Tier 4 Final / Tier4 Final

Condition: new, Year of construction: 2025, machine/vehicle number: XPV00245, fuel type: diesel, power: 92 kW (125.09 HP), motor manufacturer: Cat 4.4, General information Field of application: Construction Weights Empty weight: 2.527 kg Functional Generator capacity: 115 kVA CE mark: yes Other information Fuel consumption: 27.3 Liter/hour at 100% Load Generator: Cat LC3100 Frequency: 50/60 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 518 l Transport dimensions (LxWxH): 2,97x1,15x2,076 Nsdpfx Ajt D Uhhegzolk Production country: CN Additional information Please contact Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information - Noise Rating: 65.9 dB at 7m and 100% Load - Stage V / StageV / Stage 5 / Stage5 / EU Stage V / EU StageV / EU V / EU Five / Stage Five / EU Stage 5 / Tier IV Final / Tier 4 Final / Tier4 Final

Condition: new, Year of construction: 2025, machine/vehicle number: CATXQP20KXPZ00144, fuel type: diesel, power: 16 kW (21.75 HP), motor manufacturer: Cat C2.2, General information Field of application: Construction Weights Empty weight: 815 kg Functional Generator capacity: 20 kVA CE mark: yes Other information Fuel consumption: 5.5 Liter / hour at 100% Load Generator: Cat LC1100 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 56 l Nedpfxjt D Uhno Agzelk Transport dimensions (LxWxH): 1,718x1,001x1,3 Production country: CN Additional information Please contact Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information - Noise Rating: 65 dB at 7m and 100% Load - Stage V / StageV / Stage 5 / Stage5 / EU Stage V / EU StageV / EU V / EU Five / Stage Five / EU Stage 5 / Tier IV Final / Tier 4 Final / Tier4 Final

Condition: new, Year of construction: 2025, machine/vehicle number: CAT3516BTYAP92098, fuel type: diesel, motor manufacturer: Caterpillar 3516B, General information Field of application: Construction Weights Empty weight: 14.470 kg Functional Generator capacity: 2.250 kVA CE mark: yes Other information Fuel consumption: 395 Liter per Hour at 90% Load (Prime) Generator: Caterpillar 1647-LRW Frequency: 50 Voltage: 400 Nsdpfx Ageui E D Nezelk Drill equipment: Control Panel Transport dimensions (LxWxH): 5,93x2,29x2,37 Production country: DE Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information

Condition: new, Year of construction: 2025, machine/vehicle number: RZB00174, fuel type: diesel, motor manufacturer: C9.3B, General information Field of application: Construction Weights Nljdjxxn N Ujpfx Agzek Empty weight: 2.300 kg Functional Generator capacity: 400 kVA CE mark: yes Other information Fuel consumption: 61 L/hr at 75% load Generator: SR500 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel Transport dimensions (LxWxH): 2,662x1,12x1,766 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information RATING TYPE STANDBY: Output available with varying load for the duration of the interruption of the normal source power. Average power output is 70% of the standby power rating. Typical operation is 200 hours per year, with maximum expected usage of 500 hours per year.

Condition: new, Year of construction: 2025, machine/vehicle number: CAT00C33PEC308524, fuel type: diesel, motor manufacturer: Caterpillar C3.3, General information Field of application: Construction Weights Empty weight: 1.002 kg Functional Generator capacity: 33 kVA CE mark: yes Nljdpjwbyzksfx Agzsk Other information Fuel consumption: 6.9 Liter per Hour Prime Generator: Caterpillar M1717L4 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 161 l Transport dimensions (LxWxH): 2,12x0,98x1,52 Additional information Please contact Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information

Condition: new, Year of construction: 2025, machine/vehicle number: CATDE125JGJ700172, fuel type: diesel, motor manufacturer: Caterpillar C32, General information Field of application: Construction Weights Empty weight: 10.083 kg Functional Generator capacity: 1.250 kVA CE mark: yes Other information Fuel consumption: 185.5 Liter per Hour at 75% Load Generator: Caterpillar SR500 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1000 l Transport dimensions (LxWxH): 5,831x2,3x2,549 Additional information Please contact Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information Nodpfxorfnghs Agzolk RATING TYPE STANDBY: Output available with varying load for the duration of the interruption of the normal source power. Average power output is 70% of the standby power rating. Typical operation is 200 hours per year, with maximum expected usage of 500 hours per year.

Condition: new, Year of construction: 2025, machine/vehicle number: YBW92020, fuel type: diesel, motor manufacturer: Caterpillar 3516B HD, General information Field of application: Construction Weights Empty weight: 18.290 kg Nledpfx Agen An A Nezsk Functional Generator capacity: 2.500 kVA CE mark: yes Other information Fuel consumption: 453 Liter per Hour at 90% Load (Prime) Generator: Caterpillar SR5 Frequency: 50 Voltage: 400 Drill equipment: Control Panel Transport dimensions (LxWxH): 6,38x2,29x2,37 Production country: DE Additional information Please contact Tijmen Pesselse, Kenny Bongers or Arjen van Dijk for more information