Used Sondex Heat Exchanger for sale (17,520)

Condition: used, Solid-state relays, switchgear, switching components -Manufacturer: opto 22, solid state relay 6 pieces with heat sink -Type: 480D45-12 -Quantity: 2x assembly available -Price: per assembly Itjdpfx Agspvqyvszsr -Dimensions: 300/200/H70 mm -Weight: 3.4 kg/pc.

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: AD082, Offered is a microwave unit from Fricke und Mallah Microwave Technology GmbH, manufactured in 2010. The machine is currently not in use. It is up to date with the latest safety standards and ready for operation. An inspection of the machine is possible upon request and by appointment. Iodpfx Asxcnkaegzjtr We are available for any further questions you may have.

Condition: ready for operation (used), Year of construction: 2016, Fuel: natural gas (NG), engine: HMG, space heating unit with CHP: yes, condensing boiler: no, additional heating unit: no, low-temperature boiler: no, B11 boiler: no, combi unit: no. Rated heat input P: 88kW, annual efficiency of the space heating system η: 136%, energy efficiency class: A++, usable heat output at rated heat input with additional heater switched off/on: 87.9kW, thermal efficiency at rated heat input with additional heater switched off/on: 57.5%, electrical efficiency at the heat output of the space heating unit with CHP with additional heater switched off/on: 33.5%, auxiliary power consumption at full load/part load el: 1.132kW, in standby mode P SB: 0.06kW, standby heat loss P stby: 0.442kW, annual energy consumption Q HE: 1345kWh, sound power level indoors L WA: 72dB, operating hours: 42,892h. Water was detected in the oil circuit, the unit has an oil-related fault despite sufficient oil being present, and it also shuts down with the message 'engine too hot'. The control unit was overhauled by the manufacturer in 2024, and regular maintenance intervals for oil changes, spark plugs, valves, etc. have been carried out. With documentation. Ijdpfx Asxc Ni Rogzstr

Condition: new, Year of construction: 2024, functionality: unexamined, power: 265 kW (360.30 HP), Compact, highly efficient combined heat and power unit with a state-of-the-art SCANIA 6-cylinder, lean-burn gas turbo, 4-stroke gas Otto engine. Unit, gas pressure control system, mixture and engine water cooling circuit mounted on base frame for power and heat generation with a high-quality synchronous generator (3P, 400V, 50Hz) for mains parallel operation and optimized heat extraction via plate heat exchanger for heating water/process heat with a temperature level of VL 90°C / RL 75°C, with catalytic converter (optional SCR system) for low-emission operation in accordance with the MCP Directive (EU) and 44th BImSchV (DE). TECHNICAL DATA GENSET /BHKW - NATURAL GAS/BIOMETHANE Iedpot E N I Sefx Agzetr Electrical output at cos φ=1: 265 kWel Electrical efficiency: 41.9 % Thermal efficiency: 44.1 % Total efficiency: 86.0 % Thermal output motor: 150 kWth Thermal output at 120°C exhaust gas temperature: 129 kWth Total thermal output: 279 kWth Electricity coefficient el/th. : 0,95 LEAN TURBO NATURAL GAS / BIOMETHANE ENGINE Engine type 6R Displacement: 12,7Ltr Combustion heat output - 100% load: 632kWel Gas consumption: 63,2Nm³/h Length x width x height m 4.1 x 1.5 x 2.1 The CHP has a control cabinet with a display for the visualization of all relevant operating parameters including a DSL modem for remote maintenance and external monitoring, as well as an interface for control energy for connection to the Energiepilot E2M. The scope of delivery includes a mains starter to provide the optimum starting speed, as well as a gas detector, smoke detector, emergency stop switch and alarm flashing light/horn. All pipes are made of V2A and insulated where necessary. The CHP unit complies with the medium-voltage directive VDE-AR-N 4110:2018-11. An automatic gas shut-off valve for installation outside the CHP installation room and all operating fluids are not included in the scope of delivery. The CHP unit is also optionally available in a container.

Condition: used, Year of construction: 2001, operating hours: 22,500 h, machine/vehicle number: 27097822024901, Hereby I offer a CHP with the original Master Control control. This CHP has always been at a university and has run on natural gas. The CHP has been dismantled and is now in a heated warehouse and can therefore be picked up immediately. The control cabinet has been disconnected from the engine. Everything is documented so that the control cabinet can be easily reconnected to the engine. In addition, there is an indoor soundproof module included. Machine name: Used CHP Manufacturer: ABB Year of construction: 2001 Generator: Stamford Generator: 140 kva Turbo: no Fuel type: natural gas Electrical power: 95 kW Iodpfx Aewkaarsgzetr Thermal power: 138 kW Operating hours: 22500 Engine type: MAN E2866E Number of cylinders / arrangement: 6 in series. Speed: 1500 rpm Empty weight: 2,750 kg

Condition: good (used), Year of construction: 2012, functionality: fully functional, cooling capacity: 127 kW (172.67 HP), type of cooling: air, overall weight: 1,030 kg, total width: 1,120 mm, total length: 3,250 mm, total height: 1,620 mm, warranty duration: 6 months, heating capacity: 144 kW (195.79 HP), Aircooled chiller/Heat pump CLIMAVENETA NECS N B S 0512 127 kW / 144 kW Cooling capacity: 127 kW / 36.11 tons (12/7 — 35°C) Heating capacity: 144 kW / 40.95 tons (40/45 —7°C) Itjdpfexcucisx Agzor Year of manufacture: 2012 Options: Heat pump. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Copeland ZP295KCE-TWD-522 (scroll) Type of refrigerant: R410a Number of fans: 10 pcs. ( 5 pcs. frequency inverter driven) Dimensions: 3.25x1.12x1.62 m. Weight: 1030 kg Working hours: 1985/1985 h. Condition: Good

Condition: like new (used), Year of construction: 2024, operating hours: 60 h, functionality: fully functional, cooling capacity: 497 kW (675.73 HP), type of input current: three-phase, type of cooling: water, overall weight: 4,364 kg, ambient temperature (max.): 35 °C, ambient temperature (min.): -10 °C, input voltage: 400 V, total width: 2,200 mm, total length: 5,645 mm, total height: 2,530 mm, warranty duration: 6 months, power: 244 kW (331.75 HP), input current: 392 A, heating capacity: 492 kW (668.93 HP), input frequency: 50 Hz, Equipment: compressor, cooling unit, type plate available, Chiller / Heat Pump Trane Type: CXAF150 SE XLN Year of manufacture: 2024 Operating hours: approx. 60h R454B Cooling capacity: 497 kW - 7/12°C - 35°C Heating capacity: 492 kW - 50/55°C - 7°C COP cooling: 3.05 COP heating: 2.62 Scroll compressors 3/3 2 circuits EC fans – Extra low noise Available Itsdjw Idkuspfx Agzor Trane warranty: until 22/05/2026

Condition: new, STAPAL Handling specializes in the development, production, and installation of pallet inverters and pallet changers. A professional pallet inverter or pallet changer from STAPAL is the best solution for efficiently and safely turning or exchanging your goods. STAPAL’s pallet inverters and pallet changers are renowned for their robustness, ease of use, and high level of safety. The standard models are suitable for changing and inverting almost all types of pallets. For special requirements, the pallet inverters and pallet changers can be fully customized. Standard pallet inverter specifications: - 2000kg load capacity - Clamping range 2300mm (also available larger or smaller) - Rotation range of 180° - Maximum pallet size 1250x1250mm - Fully electric (no polluting hydraulic oil) Itedpfxswu Ecms Agzor - 16A 400V plug The pallet inverter can be fully customized with virtually all conceivable options. Standard pallet changer specifications: - 1500kg load capacity - Clamping range 2000mm (also available larger or smaller) - Rotation range of 95° - Maximum pallet size 1250x1250mm - 16A 400V plug The pallet changer can be fully customized with virtually all conceivable options. The pallet inverters are manufactured by STAPAL in the Netherlands, including CE certification, documentation, and warranty. All pallet inverters can be installed and maintained by STAPAL throughout Europe. Contact us for more information or request a free quote.

Condition: good (used), Year of construction: 2014, operating hours: 42,000 h, functionality: fully functional, 1 combined heat and power unit for natural gas (convertible to other gas types) Output: 800 KW electrical 800 KW thermal Manufacturer: G2 Engine: MWM, type TCG2016 V16C Iedpfx Asvgbdrogzstr Operating hours: 42 000 Year of construction: 2014 Complete system in container (12 x 4.5 m) with all heat exchangers, switch cabinets, power supply All maintenance intervals carried out by the manufacturer. Ready for immediate use! Further details on request

Condition: new, Year of construction: 2024, functionality: fully functional, power: 350 kW (475.87 HP), Compact, highly efficient combined heat and power unit with a state-of-the-art SCANIA V 8-cylinder, lean-burn gas turbo, 4-stroke gas Otto engine. Unit, gas pressure control system, mixture and engine water cooling circuit mounted on base frame for power and heat generation with a high-quality synchronous generator (3P, 400V, 50Hz) for mains/parallel operation and optimized heat extraction via plate heat exchanger for heating water/process heat with a temperature level of VL 85°C / RL 70°C, OPTIONAL: with catalytic converter (optional SCR system) for low-emission operation in accordance with the MCP Directive (EU) and 44th BImSchV (DE). TECHNICAL DATA GENSET /CHP - Biogas 50% CH4 Electrical output at cos φ=1: 350 kWel Electrical efficiency: 41.4 % Thermal output motor at 180^exhaust gas temperature: 334 kWth Electricity coefficient el/th. : 1,05 Engine type V8 Displacement: 16 Ltr Combustion thermal output - 100% load: 845kWel Gas consumption at50%CH4: 169.1Nm³/h Length x width x height m 4.1 x 1.5 x 2.1 Weight unfilled 4500kg The CHP has a control cabinet with a display for the visualization of all relevant operating parameters including a DSL modem for remote maintenance and external monitoring, as well as an interface for control energy for connection to the Energiepilot E2M. The scope of delivery includes a mains starter to provide the optimum starting speed, as well as a gas detector, smoke detector, emergency stop switch and alarm flashing light/horn. All pipes are made of V2A and insulated where necessary. To ensure that the motors are kept warm, the installed heat pumps are programmed to start up in a set cycle, that they start up in a set cycle and thus enable the desired temperature to be maintained. An automatic gas shut-off valve for installation outside the CHP installation room is not included in the scope of delivery. The CHP unit complies with the medium-voltage directive VDE-AR-N 4110:2018-11. An automatic gas shut-off valve for installation outside the CHP installation room and all operating fluids are not included in the scope of delivery. The CHP unit is also optionally available in a container. Iodpfx Agjt Uu Ezezetr The entire unit is also available as a natural gas version.

Condition: ready for operation (used), A combined heat and power unit (CHP), consisting of three diesel generators installed in containers, is available. 1) Engine: MAN 12-cylinder turbo, type: D 2842 LE 20, generator: Krauter, type: D-SYN-GEN, kVA: 400, kW: 360, A: 577, Hz: 50, speed: 1500 rpm. Including DELF synchronization, heating water outlet, table cooler, preheating and oil change device. 2) Engine: MAN 12-cylinder turbo, type: D 2842 LE 20, generator: Leroy-Somer, type: LSA K 475 L10, kVA: 375, kW: 300, A: 400, Hz: 50, speed: 1500 rpm. Including DELF synchronization, heating water outlet, table cooler, preheating and oil change device. 3) Engine: Daimler Benz 8-cylinder turbo, type: AGV 12, generator: Krauter, type: D-SYN-GEN, kVA: 350, kW: 230, A: 400, Hz: 50, speed: 1500 rpm. The combined heat and power unit has a total output of around 1100kVA. Including table cooler, V2A heat exchanger, containers and switch cabinets. All generators are installed in containers and are therefore easy to transport. Itsdpfx Aotwqzrjgzjr

Condition: excellent (used), Year of construction: 2013, Cooling power: 10 kW Heating power: 11 kW Refigerant: R407C Iedpfsfx S Dajx Agzotr Refrigerant diagram, operational limits see at the photos! We have15 unit in stock!

Condition: used, Year of construction: 2021, operating hours: 20,000 h, functionality: fully functional, Two heat pumps available. (The photo showing both heat pumps is from installation; all other photos are current) - Each includes control cabinet - Heating operation only - Low operating hours, see screenshots Ijdjwta T Rspfx Agzjtr Installation and operating manual (including the data sheet) available in the attachment Price is per unit

Condition: repair required (used), Year of construction: 2002, functionality: not functional, machine/vehicle number: 02093098, type of input current: three-phase, power: 190 kW (258.33 HP), input voltage: 400 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, fuel: domestic gas L, overall weight: 1,900 kg, type of cooling: air, nominal power (apparent): 237 kVA, input frequency: 50 Hz, operating pressure: 16 bar, Equipment: documentation/manual, With soundproof hood including control cabinet (display is dismantled and located in the control cabinet) The generator is included in the price General overhaul of the CHP system in 2022 Regular maintenance/inspection until September 2023 Non-functional CHP system -> we were informed that only the turbo is defective. The system has been shut down for a year (an on-site functional test is not possible). The system has not been dismantled. Disassembly and removal are the responsibility (costs, execution) of the buyer. (Inspection is possible). We cannot provide any guarantees, and the warranty is excluded to the extent permitted by law. Itodpfeq R Ri Ajx Agzer Collection/disassembly is possible Monday to Thursday from 7:30 a.m. to 4:00 p.m. and Friday between 7:30 a.m. and 1:00 p.m.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: F82946, type of input current: three-phase, power: 237 kW (322.23 HP), input voltage: 400 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, fuel: domestic gas H, overall weight: 4,650 kg, type of cooling: water, nominal power: 237 kW (322.23 HP), nominal power (apparent): 296 kVA, input frequency: 50 Hz, operating pressure: 6 bar, continuous power (apparent): 296 kVA, continuous power: 237 kW (322.23 HP), input current: 482 A, empty load weight: 4,650 kg, temperature: 70 °C, ambient temperature (max.): 25 °C, For sale is a combined heat and power plant (CHP) from the renowned manufacturer Sokratherm. The unit is currently still in operation, runs perfectly and can be inspected during dismantling. Technical Data: Model: Sokratherm GG 237 S mE Itodpfx Aswp Nnpegzor Electrical output: 237 kW Thermal output: 372 kW Year of manufacture: 2008 Fuel: Natural gas Rated speed: 1500 1/min Voltage: 400 V Weight: 4,650 kg Serial number: F82946 Condition: The unit is currently running in continuous operation

Year of construction: 2018, condition: excellent (used), functionality: fully functional, Used heat-sealing machine for medical blister, make: MEDIPACKER, model: TS 3535, Serial number: 635-231; MFG: September 2018, dimensions: Width 470 mm X Depth with guide bars 710 mm X Height 660 mm, net weight 112 kg without tools, seal surface 350 x 350 mm Max., depth of Blister 105 mm; Itodpfx Agovubapezsr The used heat-sealing machine is sold with the mould (please check the pictures); The filled blister packs are placed on the support plate. The die-cut lid is placed on the blister pack; positioning is using pins. The carriage is pushed to its rearmost stop. The sealing cycle is initiated automatically. After the sealing cycle, the carriage is pulled back again. With its compact and durable design, this table model has been specially developed for the medical industry and use in clean room areas. The three process parameters— Time, Pressure, and Temperature—are regulated to the tightest tolerances, resulting in a high-quality package. Rust-free INOX construction with aluminium parts anodized. The sealing temperature is digitally programmable up to max. 190 °C feedback control accuracy at 130 °C = ± 1.0 °C measured at the hotplate PID feedback control system. The sealing force is programmable via touch screen from 6 kN to 36 kN, adjustable in 1 kN steps, repetition accuracy within 0.5 kN. The sealing time is programmable from approximately 1.0 to 9.9 seconds. The program is adjustable by 0.1 seconds each. The repetition accuracy is better than 0.15s. Output approx. 12 Cycles/Minute, without placing and removal of trays compressed air connection 0,6 Mpa/6 bar, tube outside 12 mm, tube length 3 m. The compressed air must be supplied filtered and dry. The consumption of compressed air per cycle at 16,5 NL to 0,5 MPa; The electrical connection is 230 VPNE 50/60 Hz, max. 2300 VA; 3 x 400 V, 50 Hz, max. 4100 VA Sealing lid from a film roll For Romanian companies, finance leasing or credit in instalments is possible, with a minimum of 50% down payment. Price 7,500 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare

Year of construction: 2013, condition: ready for operation (used), Technical details on demand. Itsdog Uwx Rjpfx Agzor

Condition: ready for operation (used), Heat treatment furnace, annealing furnace, furnace, Used equipment Manufacturer: Budapest Electric Cable Factory Overall dimensions: 890 x 1350 x 1510 mm Weight: 785 kg Iedpfx Agsuhmacjzetr Electrical data: 400 V, Temperature controller adjustable up to 1100°C +temperature controller in the electrical box

Year of construction: 2020, operating hours: 14,099 h, condition: excellent (used), machine/vehicle number: S0055742, used ALMIG Belt XP 22 - (8 bar) oil-injected screw compressor with integrated heat recovery with Aircontrol Premium controller Operating hours: 14099 Bh Pressure: 8 bar Rated power: 22 kW Delivery quantity: 3.70 m³ / min Sound level: 74 dB (A) Compressed air outlet: G 1 " Dimensions length x width x height: 1250 x 880 x 1515 mm Weight: 681 kg Itsdpjix Aiyjfx Agzjr Visit our store we have a lot of used and new compressors on stock.

Year of construction: 2024, condition: new, Diesel/gas pasteurizer pasteurizes various liquids before the filling process. The liquid comes into the tubular spiral which is surrounded by hot water. The heat from the water heats up the liquid and eliminates the bacteria. One of our highest machinery achievements is our energy-saving solution integrated into our pasteurizers. It saves the heating energy up to 15-20 % and results in incredibly low heating costs. Calculations show that it costs up to 2 Euro Cents to pasteurize 1 liter of liquid. Capacity per hour – 900-1250 L of 80 ºC (176 °F) heated juice. The pasteurizer is suitable to heat various liquids, including viscous liquids: juice, puree, wine, broth, milk and other. The maximum heating temperature of pasteurizer is 90 ºC (194 °F). Our pasteurizers are equipped with highest quality German diesel and gas burners GIERSCH. The heating power is 110 kW. Pasteurizers’ heating chambers are covered with special heat-insulating paint which preserves high temperature for a longer time and increases heating capacity. Diesel/gas pasteurizer has a digital thermostat which provides an automatic water temperature control. Automatic regulation of juice temperature ensures an easy way to change the filling temperature on digital display. The pasteurizer is fast and easy to clean. It can be washed by CIP cleaning together with our Bag in Box fillers. The boiler has an integrated spiral. This provides saving of space and also prevention of heat loss when pumping the water into external heat exchanger. As a result, this technology saves the heating energy up to 15-20%. Machine can use diesel or gas on client’s request. Diesel/gas pasteurizers work in perfect synergy with our Bag in Box fillers. They have a special connection between them which prevents liquid from overflowing and ensures easy work. Iodsflq Sgopfx Agzstr

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: F1141106, type of input current: three-phase, power: 142 kW (193.07 HP), input voltage: 400 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, fuel: domestic gas H, overall weight: 2,850 kg, type of cooling: water, nominal power: 142 kW (193.07 HP), nominal power (apparent): 178 kVA, input frequency: 50 Hz, operating pressure: 3 bar, pressure: 3 bar, continuous power (apparent): 178 kVA, continuous power: 142 kW (193.07 HP), input current: 256 A, temperature: 70 °C, ambient temperature (max.): 25 °C, number of cylinders: 12, Technical data: Model: Sokratherm GG 140 S Electrical output: 142 kW Itedpswp Nctofx Agzer Thermal output: 216 kW Year of manufacture: 2012 Fuel: natural gas Rated speed: 1500 1/min Voltage: 400 V Weight: 2,850 kg Serial number: F1141106 Condition: Fully functional and in operation No known defects

Year of construction: 2006, condition: good (used), machine/vehicle number: 3206, HEAT TREATMENT FURNACES CMS ITALIA model DMH 7, MFG: 2006, serial no. 3206 - installed power 15Kw - supply voltage 220V - maximum temperature 1000 °C; - useful width 450 mm - useful height 250 mm - room depth 800 mm Itsdpfxjldfgpj Agzjr - current absorption 39.5 A - frequency 50 Hz Price Euro 4.300 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: ready for operation (used), System includes (1) Two-Cylinder Motor HERFORD 2H 280, power: 150PS, rotational speed: 400/min, electric/ heating power: 83/ 140kWh, with Generator MARELLI MJB 250 LE4 (2) Three-Cylinder Motor HERFORD 3H 280, power: 225PS, rotational speed: 400/min, electric/ heating power: 125/ 212kWh, with Generator MARELLI MJB 250 MA4. Itedpfjgg Stfex Agzor

Year of construction: 2010, condition: refurbished (used), Vacuum furnace for heat treatment of metals with a molybdenum chamber. A high vacuum of 10^-6 mbar is achieved in the furnace. Maximum operating temperature 1300 C. Dimensions of the working chamber: 0.35 x 0.42 m diameter x height. Molybdenum heating chamber. Ijdpfen Snx Hox Agzotr Closed circuit cooling system with a buffer tank Pumping system with a mechanical and turbomolecular pump. Ability to perform processes: • Annealing in high vacuum • Stress relief • Vacuum brazing • Vacuum brazing • etc. The stove is 100% functional after modernization. Sales with installation and commissioning at the customer's place. The final price depends on the scope of modernization, agreed individually with the client. If you have any questions, please contact us.

Year of construction: 2024, condition: new, Diesel/gas pasteurizer 500 heats up the liquid before the filling process. The liquid comes into the tubular spiral which is surrounded by hot water. The heat from the water heats up the liquid and eliminates the bacteria. One of our highest machinery achievements is our energy-saving solution integrated into our pasteurizers. It saves the heating energy up to 15-20 % and results in incredibly low heating costs. Calculations show that it costs up to 2 Euro Cents to pasteurize 1 liter of liquid. Capacity per hour – 400-600 L of 80 ºC (176 °F) heated juice. - The pasteurizer is suitable to heat various liquids, including viscous liquids: juice, puree, wine, broth, milk and other. - The maximum heating temperature of diesel pasteurizer is 90 ºC (194 °F). - Our pasteurizers are equipped with highest quality German diesel and gas burners GIERSCH. - The heating power is 53 kW. - Pasteurizers’ heating chambers are covered with special heat-insulating paint which preserves high temperature for a longer time and increases heating capacity. Iedpfx Aeflrk Iegzjtr - Diesel/gas pasteurizer has a digital thermostat which provides an automatic water temperature control. - Automatic regulation of juice temperature ensures an easy way to change the filling temperature on digital display. - The pasteurizer is fast and easy to clean. It can be washed by CIP cleaning together with our Bag in Box fillers. - Machine can use diesel or gas on client’s request. - The boiler has an integrated spiral. This provides saving of space and also prevention of heat loss when pumping the water into external heat exchanger. As a result, this technology saves the heating energy up to 15-20%. - Diesel/gas pasteurizer has pivoting wheels. - Diesel/gas pasteurizers work in perfect synergy with our Bag in Box fillers. They have a special connection between them which prevents liquid from overflowing and ensures easy work.