Used Heat Recovery for sale (15,760)

Condition: used, Year of construction: 2006, functionality: fully functional, power: 37 kW (50.31 HP), filter area: 169 m², total height: 5,950 mm, total length: 4,650 mm, total width: 2,250 mm, For sale is a complete industrial Aagaard/Finnrose dust extraction and filtration system, manufactured in 2006, from a wood processing facility. The system is designed as a screw filter and includes a complete dust extraction control system with heat recovery. The main fan is an Aagaard AVD 40 HF/240 with 37 kW. The filter system has approximately 169 m² of filter area with a total of 128 filter elements, each approximately 2,000 mm long and Ø 210 mm. The discharge is carried out via a discharge screw and a rotary valve airlock. Below the discharge is a matching hopper with approximately 6 m³ volume on a mobile trolley, which is included in the scope of supply. The complete control cabinet for the dust extraction control and heat recovery is part of the system. The control cabinet includes, among other things, the controls for the rotary valve airlock, discharge screw, and four cleaning groups, as well as a Schneider-Electric frequency inverter for the dust extraction fan. Technical data: Aagaard / Finnrose industrial dust extraction system / screw filter Year of manufacture: 2006 Main fan: Aagaard AVD 40 HF/240 Motor power main fan: 37 kW Filter area: approx. 169 m² Filter elements: 128 pieces Dimensions filter elements: approx. Length 2,000 mm / Ø 210 mm Electrical system: 3 × 400/230 V, 50 Hz Rated current control cabinet: 160 A Discharge via discharge screw and rotary valve airlock 4 cleaning groups Complete control cabinet for dust extraction control and heat recovery Frequency inverter for main fan Heat recovery / return air system available Dwodpfx Apoz Ik Ate Iec 6-m³ hopper on mobile trolley included Existing steel substructure can be taken over Extensive existing piping can be included by agreement Dimensions: Filter tower incl. rotary valve airlock: approx. 5,950 × 2,280 × 4,632 mm (L × W × H), height from steel substructure. Steel substructure: approx. 5,500 × 2,800 × 2,250 mm (L × W × H from the ground). Total height of filter tower incl. substructure: approx. 6,882 mm. Availability / Dismantling: Sale possible immediately. The system is located at CH-3608 Thun, Switzerland. The complete dismantling and removal must be completed no later than July 31, 2027. Dismantling, loading, transport, and any customs clearance will be carried out entirely by the buyer at his own cost and responsibility. All necessary skilled personnel, lifting equipment, cranes, and transport means must be organized by the buyer. Inspection possible by appointment. Sale from location in the existing condition. Technical specifications provided to the best of our knowledge, without guarantee; inspection by the buyer before purchase is recommended. Selling price: 29,500 EUR Price net, any statutory taxes and duties are additional. Export, customs clearance, and import duties are the responsibility of the buyer.

Year of construction: 2020, operating hours: 14,099 h, condition: excellent (used), machine/vehicle number: S0055742, used ALMIG Belt XP 22 - (8 bar) oil-injected screw compressor with integrated heat recovery with Aircontrol Premium controller Operating hours: 14099 Bh Pressure: 8 bar Rated power: 22 kW Dwedpjix Aiyjfx Ap Ijc Delivery quantity: 3.70 m³ / min Sound level: 74 dB (A) Compressed air outlet: G 1 " Dimensions length x width x height: 1250 x 880 x 1515 mm Weight: 681 kg Visit our store we have a lot of used and new compressors on stock.

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 174146, fuel type: gas, color: blue, power: 10,000 kW (13,596.20 HP), nominal power: 10,000 kW (13,596.20 HP), nominal power (apparent): 12,163 kVA, 10MW Wärtsilä AMG Gas Power Plant with Heat Recovery Primary Power Generation: Wärtsilä W20V34SG Gas Engine - Output: 10,000 kW (10 MW) Dodpoygx Tzefx Ap Iswc - Configuration: 20‑cylinder, spark‑ignited gas engine - Fuel: Natural gas - Year: 2013 Electrical Generation: AMG 1120LT08 DSE Generator - Rating: 12,163 kVA - Year: 2013 Heat Recovery System: Cochran Waste Heat Boiler - Thermal Output: 17,500 kW - Year: 2013 Cochran Economiser – Waste Heat Recovery Unit - Thermal Output: 2,719 kW - Year: 2013

Condition: used, functionality: fully functional, Central ventilation unit HELIOS Air 1 XH1500 with highly efficient heat recovery and integrated air reheating. For controlled supply and exhaust ventilation of larger residential, commercial, or industrial areas. 2 EC fans at 0.5 kW each, 1,490 m³/h at 350 Pa. Electric preheating coil 3.9 kW, electronic reheating coil 3.8 kW, cross-flow heat exchanger, integrated filter box. Includes HELIOS Universal control unit ECO and 2 HELIOS duct sensors TFK – a functionally complete system. Technical data: - Air flow rate 1,490 m³/h at 350 Pa; fans 2 x 0.5 kW EC - Preheating coil 3.9 kW / Reheating coil 3.8 kW; cross-flow heat exchanger; integrated filter box - Control system: HELIOS Universal control unit ECO and 2 duct sensors TFK included - From a commercial environment, sold in its current condition without warranty. Djdpfezmaqaox Ap Iowc More units and equipment are continuously being offered for sale as part of a laboratory and pilot plant liquidation – inquiries are welcome. Sold on behalf of a customer via the Köck auction house. Located in eastern Austria, exact address available upon request. Collection/dismantling by the buyer.

Year of construction: 1999, operating hours: 76,000 h, condition: used, functionality: unexamined, Technical parameters: • Manufacturer: AUSTRIAN ENERGY • Type: Dual pressure drum boiler (1999) • HP steam flow: t/h 40.8 • LP steam flow: t/h 17.3 • HP steam parameters: bar/°C 52 / 425 • LP steam parameters: bar/°C 4.2 / 180 • Flue gas temperature at HRSG outlet: °C 80 • Flue gas stream to the stack: t/h 468, k Nm3/h 482 • Heat recovered by the steam and water cycle from flue gas in HRSG: MWt 45.9 • Maximum output of DH exchanger: MWt 8.0 • Operating hours: 76,000 hours Dwedpsy D Hy Esfx Ap Ijc The high- and low-pressure sections of the equipment and the drums (HP and LP) consist of 6 independent, transportable modules. The boiler wall insulation is partial and requires replacement.

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: A-6.3240, Complete 2019 Wienstroth Fixture Heat Treat/Quenching Line. Furnace Temperature Max 880 Deg C, 480kW, Heating Zones: 4, Power Supply Voltage: 460/60 Volts/Hz. Refer to attachments for further equipment specs & drawings. Dwodjz Hb S Aopfx Ap Ioc Line to include: High Temperature Furnace w/ Material Conveyers Overhead Crane & Hoist System Quenching Bath w/ Heat Exchanger, Pumps and PLC Washing/Rinsing Station, 2 Zone, TPS & Entrance Conveyer Assembly Transfer Conveyer System, Material Handling Assembly w/ Tracks Low Temperature Temper Furnace w/ Cooling Conveyer & PLC Quenching Line PLC Controller Power Distribution Cabinets, Rittal/Wienstroth 24x Pallets Quenching Line Tooling

Year of construction: 2017, condition: excellent (used), REF: MM6476 Dedpfx Apszrg T Ee Iewc 1 x 2017 Packaging Automation Ltd Eclipse SL4 inline heat-sealing machine supplied with 1 x Packaging Automatic Ltd Eclipse C1 automated chain-and-peg conveyor system, 2 x interchangeable sets of tooling and some spare parts. Previously used to heat seal punnets of cauliflower and cauliflower/broccoli mix from multi-head weigher. Both machines on height adjustable feet. The Eclipse SL4 is a fully automatic inline tray-sealing machine designed for high-throughput food packaging applications. Suitable for sealing a wide range of pre-formed trays, the machine is ideal for use within the meat, poultry, seafood, ready meal, fresh produce, bakery, and convenience food sectors. The automated conveyor system provides continuous product handling, helping to improve production efficiency and throughput. Specification: Model of inline heat sealer - Eclipse SL4. Serial number - EC34-MC-00100. Model of indexing inline conveyor – Eclipse C1. Date of manufacture - 2017. Tooling - 2 x sets. Set 1: 4 x 1 format with arms. For punnets (double section) measuring 261mm L x 166mm W x 55mm D. Set 2: 4 x 1 format with arms (single punnet - in machine) measuring 177mm L x 140mm W x 55mm D. Eclipse C1 infeed conveyor belt (modular plastic belt section) - 300mm wide. Outfeed conveyor belt - 290mm wide, blue rubber. System footprint: Eclipse C1 indexing conveyor footprint - 3870mm L x 950mm W x 1050mm H. Eclipse SL4 inline sealer footprint - 3230mm L x 1050mm W x 2050mm H. Condition – Very good. This system was purchased new and run for approximately 6 months per year. Supplied with various spare parts, including cutters for both sets of punnets, spare belts, heater pads, etc. *Please note* - None of the following equipment pictured is included in the sale: multi-head chutes with sensors feeding the C1 infeed conveyor AND thermal transfer coder mounted on Eclipse SL4 inline sealer.

Condition: used, Year of construction: 2011, functionality: fully functional, total length: 8,310 mm, total width: 1,641 mm, total height: 1,824 mm, overall weight: 2,100 kg, input voltage: 400 V, track width: 660 mm, type of input current: three-phase, power: 5.3 kW (7.21 HP), pressure: 1 bar, number of injections: 6, temperature: 300 °C, Title for MachineSeeker AFO Heat AFOGRILL-6B-600 industrial gas-fired infrared grill – 2011 Sales Description Djdpfozn Ht Dex Ap Iswc For sale: AFO Heat AFOGRILL-6B-600, an industrial gas-fired infrared grill for the continuous grilling, browning, and heating of food products. The machine is equipped with 6 infrared gas burners, each with a thermal output of 46 kW. The total installed thermal output is therefore 276 kW. This grill is suitable for industrial food production and can be used, among other things, for meat products, hamburgers, chicken products, kebabs, and similar products. Technical Specifications Manufacturer: AFO Heat NV Model/Type: AFOGRILL-6B-600 Year of Manufacture: 2011 Serial Number: K015 Number of Burners: 6 Thermal Output: 6 × 46 kW Total Thermal Output: 276 kW Electrical Power: 5.3 kW Supply Voltage: 3 × 400 V + N + PE Required Gas Pressure: 20 to 100 mbar Machine Weight: approximately 2,100 kg Construction: stainless steel CE Marking: present The AFOGRILL is designed for professional and industrial applications where uniform and powerful heat treatment is necessary. Thanks to the infrared gas technology, the product can be grilled quickly and given an attractive color and grill pattern. Dimensions, belt speed, capacity, type of gas used, and other information are available upon request. Short version AFO Heat AFOGRILL-6B-600 industrial infrared gas grill, year of manufacture 2011. Equipped with 6 burners, each with 46 kW, for a total thermal output of 276 kW. Electrical power 5.3 kW, connection 3 × 400 V + N + PE, gas pressure 20–100 mbar, and weight approximately 2,100 kg. Stainless steel construction with CE marking. Suitable for the continuous grilling and browning of meat, chicken, and other food products.

Condition: good (used), Year of construction: 2019, Heck DVAS 180 Refrigeration Unit, 180 kW Dsdpjzrlzzofx Ap Ijwc Professional, industrial refrigeration unit from the premium manufacturer HECK Kältetechnik GmbH. The unit is in very good condition for its age and has been reliably used until recently. Thanks to the modern refrigerant R513A, the unit is future-proof and meets current environmental and efficiency standards. Production cooling with heat recovery Technical data (according to the nameplate): Manufacturer: HECK Kältetechnik GmbH Model / Type: DVAS 180 Machine No.: T-19307 Year of manufacture: 2019 Refrigerant: R513A (Max. filling weight: 98 kg) Operating voltage: 400 V / 50 Hz Operating current: 85.4 A (Max. operating current: 141 A) Max. operating pressure: ND 19 bar / HD 28 bar CE certified: Yes (Number 0036) Performance data & application area Refrigeration capacity: 180 kW – Ideal for efficient cooling of large halls or commercial areas. Heating capacity: 290 kW – Highly efficient air heating through clever use of waste heat from the refrigeration cycle. Dehumidification capacity: approx. 100 liters per hour – Perfect for precise humidity control. Application areas: Due to these combined performance data, the unit is ideally suited for industrial production halls, large warehouses, logistics centers, or for demanding process cooling and commercial dehumidification. The following precise operating temperatures can be derived from the technical specifications and design data in the documentation for the Heck DVAS 180: 1. Refrigeration core area Evaporation temperature: The unit is designed for an evaporation temperature of 6 °C. Condensation temperature (liquefaction): The water-cooled plate condenser operates at a condensation temperature of 43 °C. 2. Air-side temperature ranges (process air) Depending on which ventilation or unit (e.g., cabin, cooling zone, or ADZ unit) is used, the air inlet and outlet temperatures vary: Standard cooling zone: Air inlet at 26.5 °C is cooled down to an air outlet temperature of 19 °C. Cabin air conditioning (ULA): Air inlet at 26 °C is conditioned to an air outlet temperature of 22 °C. Process air dehumidification (ADZ): The air enters at 26 °C and leaves the evaporator strongly dehumidified at 10.3 °C. Reheating (ADZ unit): A water-cooled reheater can raise the cooled air from 10 °C back to 17.5 °C. 3. Water-side temperature ranges (cooling water / heat recovery) Plate condenser (condenser cooling): Is designed for a water inlet of 32 °C and a water outlet of 38 °C (at a flow rate of 35 m³/h). Plate heat exchanger (heat recovery): Uses the hot gas energy to heat water from 42 °C to 47 °C. "One-stop shop: We would be happy to offer you suitable bank financing for your project." More articles - new and used - can be found in our shop! International shipping costs on request!

Year of construction: 2013, condition: ready for operation (used), Smipack BP800AS Monoblock automatic shrink wrapper with an inline infeed and a pneumatic sealing bar Maximum Output: Up to 12 packs per minute (ppm) Dodpjz Arh Aofx Ap Iewc Sealing Bar Size: 760 mm Product Maximum Height: 380 mm Maximum Pack Length: 1200 mm Maximum Film Reel Size: 750 x Ø 350 mm Max film width: 750 mm Advised Film: LDPE 20 – 100 µ Power Supply: 220–240 V / 380–415 V (3PH + PE / 3PH + N + PE, 50/60 Hz) Installed Power: 17,180 W Air Pressure: 6 Bar Required Air: 13 Nl/p (normal liters per pack) Machine Net Weight: 625 kg Machine Dimensions: 2840 x 1410 mm (Height: 2105 – 2265 mm) Key Features FLXMOD® control system with a 7-inch full-colour touch screen and PLC.Memory Can store up to 50 different working cycles. Tunnel Conveyor: Built with heat-resistant glass fiber bars that support up to 30 kg and prevent rust. Infeed: Motorized upper and lower film unwinding with inverter-controlled adjustable speed.

Condition: used, functionality: fully functional, power: 35.3 kW (47.99 HP), Highly efficient 4-pipe heat pump with R290 (propane) This state-of-the-art 4-pipe heat pump has been specifically developed for the flexible, simultaneous or independent provision of chilled and hot water. Thanks to cutting-edge inverter technology and the environmentally friendly refrigerant R290, the unit offers maximum energy efficiency with a minimal environmental footprint. The device features robust enclosure panels and integrated sound insulation in the compressor compartment to ensure extremely quiet operation. Equipped with a factory-integrated hydraulic kit (1 pump) and a 100-liter buffer tank, the unit is ready for immediate operation and can be seamlessly integrated into complex building systems. Key technical data at a glance: • Cooling capacity: 14.1 – 35.3 kW (modulating) • Heating capacity: 19.2 – 39.5 kW (modulating) • Refrigerant: R290 (propane – future-proof and GWP-compliant) • Compressor configuration: 1 highly efficient, semi-hermetic reciprocating compressor / 1 refrigeration circuit • System type: 4-pipe unit Intelligent operating modes for maximum energy savings Dedpfxjz Ix D Se Ap Iswc • Flexible 4-pipe logic system: Complete hydraulic separation of air conditioning and domestic hot water (DHW). The control system regulates the pumps fully automatically as needed and allows for exclusive DHW activation via a digital input. • Highly efficient combined cycle (simultaneous operation): • In cooling mode: When DHW is required, the system utilizes complete heat recovery. It provides free hot water while the fan stops. • In heating mode: The system prioritizes DHW production and automatically switches back to room heating once the setpoint is reached. • On-demand individual operation: Efficient single-mode operation for cooling, heating, or hot water only, with precise inverter control to avoid partial load losses.

Condition: used, Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 2212725, type of input current: three-phase, power: 1,999 kW (2,717.88 HP), input voltage: 400 V, control cabinet width: 800 mm, control cabinet length: 3,000 mm, control cabinet height: 2,400 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, total height: 3,200 mm, total length: 16,000 mm, total width: 3,200 mm, fuel: domestic gas H, overall weight: 45,000 kg, type of cooling: water, nominal power: 1,999 kW (2,717.88 HP), nominal power (apparent): 2,000 kVA, input frequency: 50 Hz, input current: 250 A, Equipment: documentation/manual, The CHP unit is used in the horticultural operation to supply electricity. It can operate in parallel with the grid or in island mode. It is maintained by the manufacturer under a full-service contract. It is in good condition and fully functional. The container is spacious and very comfortable for service work. The generator is connected to the circuit breaker via a copper busbar system, ensuring high quality. The container temperature is controlled automatically via electric sunshades. The switch room is heated and air-conditioned. An EMI box is installed for continuous NOx measurement. A 15-meter chimney is located on the roof. A ladder for exhaust gas measurement is included. The unit is sold “as is” for pickup at the premises. The sale is due to a change to wind power generation. The service contract, valid up to 60,000 operating hours, can be taken over if desired and possible. It is a perfectly designed container, extremely spacious and solidly built! It is intended to remain in operation until December 1, 2026. If necessary, it can also be dismantled immediately. We would be happy to arrange a viewing and demonstrate its operation. Dwodpfx Apoz D Ihfo Ijc

Condition: good (used), Year of construction: 2003, Heat exchanger, cooling coil, cooling pipe, cooling spiral, shell and tube heat exchanger, oil cooler for screw compressor, compressor, stationary air compressor, plate heat exchanger -Manufacturer: Kaeser, plate heat exchanger heat recovery for Kaeser screw compressors -Type: PTG 141-281 -Volume flow rate: 1.48 m³/min Technical data: see photo of the nameplate -Number: 2x heat exchangers available Price: per piece -Dimensions: 810/385/H660 mm Dedpfx Apjz D T Tyj Ijwc -Weight: 93 kg/unit

Condition: used, KMA Heat Exchanger and Pumping Station Dedjym Dx Ajpfx Ap Iowc

Year of construction: 2021, condition: used, Alfa Laval T10 Plate Heat Exchanger Dwodpjz Dix Esfx Ap Ioc Industrial Alfa Laval gasketed plate heat exchanger, suitable for efficient heat transfer in industrial process applications. The unit consists of a plate pack mounted in a heavy-duty Alfa Laval frame with inlet and outlet connections. Product details: Manufacturer: Alfa Laval Type: T10 Equipment: Gasketed plate heat exchanger Quantity available: 2 units Heavy-duty steel frame Removable plate pack Multiple process connections Industrial configuration Condition: Used industrial surplus Both heat exchangers are available individually or together. The units are currently installed and can be inspected prior to purchase. Location: The Netherlands This equipment is industrial surplus and is sold as-is, without warranty or claims. Please contact us for additional information, dimensions, or to make an offer.

Condition: excellent (used), TETRA PAK SPIRAFLO – Aseptic Multitubular Heat Exchanger Aseptic multitubular heat exchanger TETRA PAK SPIRAFLO, designed for the continuous thermal treatment of liquid and viscous food products in industrial process lines. The Tetra Spiraflo system uses tubular heat exchange technology to perform indirect heating and cooling operations, keeping the product and the heating fluid separate. Its multitubular configuration makes it particularly suitable for pasteurization, UHT treatment, aseptic processing, heating, cooling, and heat recovery processes. MAIN FEATURES -Manufacturer: TETRA PAK Djdpfxjzm U Nqo Ap Ijwc -Series: Tetra Spiraflo -Type: Aseptic multitubular heat exchanger -Technology: tubular/multitubular heat exchange -Hygienic construction in stainless steel -Continuous thermal treatment -Indirect heating and cooling of the product -Multiple heat exchange sections -Sanitary connections -Suitable for pasteurization and UHT processes -Integrable into aseptic processing lines -Designed for continuous industrial use APPLICATIONS Depending on the configuration of the installation, the Tetra Pak Spiraflo can be used for: Preheating and heating Pasteurization UHT treatment Aseptic processing Cooling Heat recovery Thermal conditioning prior to filling It can be integrated with process tanks, pumps, homogenizers, deaerators, holding tubes, aseptic tanks, and filling systems. Particularly suitable for the dairy, beverage, juice, processed fruit, sauce, and liquid food industries, and depending on its configuration, can be used with milk, juices, beverages, purees, concentrates, sauces, and other products that require controlled thermal treatment. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 2007, operating hours: 66,031 h, functionality: fully functional, type of input current: three-phase, power: 800 kW (1,087.70 HP), input voltage: 400 V, type of cooling: water, input frequency: 50 Hz, input current: 80 A, MWM / Deutz TCG 2016 V16 CHP Unit – Approx. 800 kWe – Natural Gas For sale: complete MWM / Deutz TCG 2016 V16 CHP unit, year 2007, suitable for operation on natural gas. The unit has approximately 66,031 operating hours. The last major service was performed at approximately 48,000 operating hours. The CHP unit will only be sold after the engine overhaul has been completed. Work included before delivery Prior to delivery, the following work will be carried out: - Complete overhaul of the MWM TCG 2016 V16 engine - Overhaul of the electric pumps - Cleaning of the exhaust gas cooler - Cleaning of the condenser The generator was tested while the unit was still in operation and was found to be in good working order. The unit is currently disconnected from the gas supply. The oil and cooling water have been drained in preparation for the overhaul, so the engine and complete CHP unit can no longer be demonstrated running in its current condition. Dedpfxoz E A Rws Ap Iewc Main specifications - Manufacturer: MWM / Deutz - Model: TCG 2016 V16 - Year: 2007 - Fuel: Natural gas - Electrical output: approx. 800 kWe - Generator: Marelli - Generator rating: 1,300 kVA - Grid frequency: 50 Hz - Control system: TEM Evolution - Operating hours: approx. 66,031 h - Last major service: approx. 48,000 h Scope of supply The unit is offered as a complete CHP package and includes: - MWM / Deutz TCG 2016 V16 gas engine - Marelli generator - TEM Evolution control system - Gas train - Generator switchgear - Heat recovery equipment - Exhaust gas cooler - Condenser - Associated installation components supplied with the unit The unit is suitable for grid-parallel operation and can also be prepared for island / stand-alone operation if required. Complete service and technical documentation A complete maintenance history is available, including: - Full service logbook - Maintenance records - Oil sample reports - Electrical schematics - P&ID drawings - Technical and maintenance documentation Technical performance data for this engine type is also available, including information on electrical efficiency, gas consumption, thermal output, and total CHP efficiency. Installation and commissioning available In addition to supplying the CHP unit, CHP Solutions can also provide installation and commissioning on site. Depending on the project requirements, we can offer support with: - Positioning and installation of the CHP unit - Mechanical installation - Electrical installation - Gas connection - Cooling and heat-recovery connections - Grid connection - Start-up - Commissioning - Preparation for grid-parallel or island operation This means the CHP can be supplied not only as a unit, but also as part of a complete installed and commissioned energy solution. The unit is located in the Netherlands and can be inspected by appointment. For further technical information, documentation, photos, installation options, or a complete project quotation, please contact CHP Solutions.

Year of construction: 2022, condition: new, Kairos Engineering's energy recovery system is a technology that recovers the heat contained in the industrial hot wastewater, to transfer it to other water to be put back into the production process. The transfer takes place by means of shell and tube heat exchangers in which the two fluids, which never meet directly in order not to undergo contamination, they are sent against the current, that is, one against the other. Indicative savings of 30%. Dwodpfxjh Akv Hs Ap Ijc

Condition: excellent (used), Automatic machine with product feed conveyor in line set up for manual loading of the product on the belt or inserted in completely automatic lines. Suitable for packaging individual or already packaged products such as boxes, trays, hanks of cable, parquettes, or light to very light products with a minimum height of 3mm such as boxes, linen, reams of paper, magazines, leaflets. In production up to 23.09.2026 Price € 7,995.00 Quantity 2 machines available Djdpfxez D Ugus Ap Ijwc Shipping can be arranged for the buyer

Year of construction: 2026, condition: new, functionality: fully functional, Make best 3D effects using simple and modern screen printing technology connected with a hot rotary cylinder. High build varnish, high build metallic silk foils, different special colors and effects. 1. Screen unit + heated cylinder with foil unwinding/rewinding 2. Machine works in roll to roll mode 3. Maximum web width 350mm or 450mm depending on the model 3. UV curing or LED curing 4. Configure this machine as you want. 5. New machine with a warranty. 6. Availbale machine on stock for imidiate purchase. If to make the screen plate with laser technology then you can almost consider this machine as a digital embellishment machine. Very effective machine with reasonable price. Dwjdpfjz Hwfxex Ap Isc Welcome to our demoroom in Poland, near Copernicus Airport Wroclaw

Condition: used, Large Industrial Plate Heat Exchanger – AISI 316 Stainless Steel Plates Heavy-duty industrial plate heat exchanger equipped with a large plate pack made of AISI 316 stainless steel. Product details: Equipment: Plate heat exchanger Plate material: AISI 316 stainless steel Large industrial plate pack Dwedpfx Asz Di D Ijp Ijc Heavy-duty steel frame Flanged process connections Condition: Used industrial surplus Identification/marking: 316 The heat exchanger is dismantled and available from stock in Rotterdam, The Netherlands. Manufacturer, exact model, capacity and other technical specifications are currently unknown. Please refer to the pictures for the configuration and condition. This equipment is industrial surplus and is sold as-is, without warranty or claims. Please contact us for additional information or to make an offer.

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, power: 50 kW (67.98 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 2,200 kg, nominal power: 50 kW (67.98 HP), input frequency: 50 Hz, continuous power: 50 kW (67.98 HP), input current: 72 A, Equipment: documentation/manual, For sale: new and unused 2G g box 50plus combined heat and power (CHP) unit from 2022. This is a 2G Energietechnik g box 50plus, configuration as70 4, suitable for simultaneous generation of electricity and heat using natural gas. The unit has never been put into operation and is in new condition. At full load, the CHP unit delivers 50 kW of electrical power and approximately 104 kW of thermal power. The unit is designed for 400 V and 50 Hz and is equipped with a Liebherr G924 natural gas engine and a Leroy Somer LSAH 44.3 generator. Technical specifications: • Manufacturer: 2G Energietechnik GmbH • Type: g box 50plus • Configuration: as70 4 • ID number: H1214 • Year of manufacture: 2022 • Electrical power: 50 kW • Thermal power: approximately 104 kW • Rated voltage: 400 V • Rated frequency: 50 Hz • Rated current: 72 A • Weight of CHP module: approximately 2,200 kg • Fuel: natural gas • Electrical efficiency: approximately 34.5 percent • Thermal efficiency: approximately 71.8 percent • NOx emissions: less than 125 mg per Nm³ • Sound pressure level of CHP: approximately 55 dB(A) at 1 meter The offered package consists not only of the CHP module. The installation also includes two Viessmann boiler bodies, one Viessmann Proflame VM IV 3 gas burner, a separate control cabinet, and various flue gas components, fittings, and related documentation. The original new price of the complete installation was approximately €189,000. The installation comes from a project for which it was ultimately not used. The various main components are from 2022 and have been stored without being put into operation. Due to the size and composition of the installation, we advise interested parties to contact us in advance for further technical information, photos, documentation, and an overview of the components available. An inspection is, of course, possible (location: Winterswijk, Netherlands). Dedpfxsz Hngme Ap Iowc Loading onto the buyer's transport vehicle is possible on site.

Condition: good (used), Year of construction: 2019, functionality: fully functional, cooling capacity: 95 kW (129.16 HP), type of input current: three-phase, type of cooling: water, overall weight: 729 kg, input voltage: 400 V, total width: 920 mm, total length: 2,430 mm, total height: 1,060 mm, warranty duration: 6 months, heating capacity: 130 kW (176.75 HP), WATERCOOLED CHILLER/HEAT PUMP DAIKIN EWHQ120G 95/130 kW Cooling capacity: 95 kW - 27 ton (12/7°C — 35°C) Heating capacity: 130 kW - 36.9 ton (40/45°C - 7°C) Year of manufacture: 2019 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Options: Heat pump Type of refrigerant: R410A Compressors: 2 pcs. Copeland(scroll) Dimensions: 2,432 х 0,928 х 1,066 m. Weight: 729 kg. Working hours: 11437 / 4712 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. Dwjdpfxjy U U Tuo Ap Isc WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: excellent (used), mileage: 331,000 km, power: 102 kW (138.68 HP), first registration: 08/1991, fuel type: diesel, tire size: 235/75R17,5, axle configuration: 4x2, wheelbase: 4,250 mm, fuel: diesel, color: blue, driver cabin: day cab, gearing type: mechanical, number of gears: 5, emission class: euro2, suspension: steel, permissible axle load (axle 1): 3,100 kg, Year of construction: 1991, = Additional Options and Accessories = - 5-speed manual transmission - Heated mirrors - Co-driver seat - Leaf spring suspension - Comfort seats for driver - High beam headlights - Speed limiter - Master switch - Hydraulic system - Radio/CD player - All-round lights - Third seat with seatbelts - Power take-off (PTO) - Power take-off (PTO) = Notes = PERFECT CONDITION MERCEDES-BENZ 814 ECOLINER (6-CYLINDER) 4x2 FULL STEEL SUSPENSION RECOVERY TRUCK WITH HYDRAULIC RAMPS, WINCH & MANUAL GEARBOX!! 140HP, 6-CYLINDER ENGINE!! 5-SPEED MANUAL GEARBOX!! STEEL SUSPENSION!! P.T.O.!! ETC.!! CAR TRANSPORTER BODY: LENGTH x WIDTH x HEIGHT Approx. 5.90 x 2.30 x 0.65 - 1.15M. !! HYDRAULIC RAMPS!! WINCH!! TRUCK IN PERFECT WORKING AND DRIVING CONDITION, READY FOR RECOVERY OR CAR/MACHINE TRANSPORT JOBS!! MORE MERCEDES-BENZ 4x2 / 6x4 / 6x6 / 8x4 / 8x8 TRUCKS IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! SHIPMENT, STACKING, TRANSPORT, TRANSIT REGISTRATION OR LOADING? NO PROBLEM FOR US, WE ARE A "ONE-STOP SHOP" COMPANY!! PLEASE VISIT OUR WEBSITE TOO: YOU CAN ALSO CHECK OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! ( / ) ENGEL TRUCKS: "YOUR GLOBAL TRADING PARTNER" = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 5,958 cc Transmission Transmission: 5-SPEED MANUAL GEARBOX, 5 gears, manual gearbox Axle Configuration Tire size: 235/75R17.5 Brakes: Drum brakes Suspension: Leaf spring suspension Front axle: Max. axle load: 3100 kg; Steered; Tire tread depth left: 90%; Tire tread depth right: 90% Rear axle: Dual tires; Tire tread depth left inner: 90%; Tire tread depth left outer: 90%; Tire tread depth right inner: 90%; Tire tread depth right outer: 90%; Reduction: single reduction Weights Unladen weight: 4,660 kg Payload: 2,830 kg GVW: 7,490 kg Functional Body manufacturer: FALCOM CAR / MACHINE RECOVERY TRUCK WITH WINCH Max. number of cars: 1 Loading area height: 100 cm Condition Technical condition: very good Optical condition: very good Further Information Please contact the Sales Department or Erik Engel for further information. Dwedpfxew I Halj Ap Iec

Year of construction: 2014, condition: like new (used), Heating tunnel for drying footwear. Dedpez Hw D Ujfx Ap Iewc