Used Sono 3 for sale (64,314)

Condition: ready for operation (used), Year of construction: 1998, operating hours: 14,157 h, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 653 mm, controller manufacturer: SIEMENS, number of axes: 3, This 3-axis MIKRON VF 3 vertical machining center was manufactured in 1998. It features a table size of 460 × 1,220 mm, with X-axis travel of 1,016 mm, Y-axis travel of 508 mm, and Z-axis travel of 653 mm. If you are looking to get high-quality milling capabilities, consider the MIKRON VF 3 machine we have for sale. Contact us for more information. Lsdpfxjych Sre Afzsrg • Table size: 460 × 1,220 mm

Condition: used, machine/vehicle number: WKESD00000082xxxx, Year of construction: 2018, Please contact ATS Norway for more information Please provide reference number upon request: 21821 Specifications: - 2018 model - EU approved until 05.03.2026 - 33 pallets Lrjdjxxpvvepfx Afzog - 3 axles - Brake pads and discs replaced - Tires (see pictures) - Damage right side top - Delivery by agreement Description: 2018 Krone 3 axle thermo trailer with carrier aggregate. brake pads and discs replaced in May this year. Small damage on top right side. Delivery by agreement. Technical approved: Yes EU-approved until: 05.03.2026 Own weight: 8786 Total Weight: 45000 Payload: 36214 Width: 260 Length: 1404 Model: 2018 Krone 3 akslet thermohenger m/ carrier aggregat

Condition: used, Year of construction: 1998, Serial number: 2xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20516 Specifications: Lredpfxjwpialj Afzsg - 1998 model - Unknown hours - 19000 kg - Track width: 60 cm - Machine width: 276 cm - Poor chassis - Toothed bucket - ​​Manual hp attachment - Serviced by owner - Sweat from cylinders may occur - Air conditioning - Light - Ready for delivery Description: We have a 1998 Komatsu PC200-3 excavator M/ Toothed bucket for sale. Service has been performed by owner. Errors and defects may occur as the machine is from 1998. The chassis is in poor condition. Other than this, it functions as it should according to the owner. Ready for delivery Own weight: 19000 Total Weight: 19000 Width: 276 Model: PC200-3

Condition: good (used), Year of construction: 1993, turning diameter over bed 400 mm turning diameter over slide rest 210 mm turning length 1060 mm centre height 200 mm spindle bore 58 mm spindle taper: Camlock D 1-6 Drive 3,2/4,9 kW spindle turning speed range 16, von 55 bis 1600 U/min feeds - longitudinal 0,039-0,541 mm/U feeds cross 0,019-0,271 mm/min. Ljdpfx Afsxtfx Ajzorg weight of the machine ca. 1,45 t dimensions of the machine ca. 1900 x 870 x 1700 mm High-quality machine with induction-hardened guideways, torsionally rigid bed, main spindle made of chrome-nickel steel, surface-hardened and ground gears, automatic circulating lubrication in the spindle housing, slip clutch in the support, bed lubrication via hand pump, Siemens electrical system. Thread feeds for metric, inch, module, and diametral pitch. 3-axis digital readout: 2 scales are mounted, the scale on the top slide has been replaced but still needs to be mounted. The display unit is for lathes and therefore, with the appropriate setting, adds the slide travel to the top slide travel. The machine was only used in a prototype workshop for sporadic applications. Machine dealer with own stock of 1600 m².

Condition: used, mileage: 199,999 km, power: 116 kW (157.72 HP), first registration: 05/2005, fuel type: diesel, overall weight: 3,500 kg, color: blue, gearing type: mechanical, emission class: euro3, number of seats: 3, Equipment: ABS, central locking, Now chat via WhatsApp: Lrjdpfx Aoyawu Refzjg Attention! Preferential sale to commercial customers! Vehicle has NO TÜV / Emissions Test! Internal ID Number: [3096] --- Vehicle Highlights: * 19% VAT deductible * German vehicle * 3-way tipper * Tow bar * Vehicle has NO TÜV / Emissions Test! Special equipment: Electrically adjustable and heated exterior mirrors, chassis: rear shock absorbers reinforced Further equipment: Driver airbag, 80 Ah battery, rubber flooring in driver's cab, lockable glovebox, body/construction: double-cab flatbed, engine 2.8 L – 116 kW TDI, wheelbase 3550 mm, single passenger seat in cab, front stabilizer, heat-insulating glazing, gross vehicle weight 3.50 t. --- Interested in leasing or financing? We offer attractive deals – also possible with no down payment! Feel free to contact us. Contact: Phone: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening Hours: Mon–Fri: 9:00 – 18:00 Sat: 9:00 – 14:00 --- Note: All online information is non-binding and serves only for general vehicle description. Errors, mistakes, and prior sale reserved. The binding condition of the vehicle is defined exclusively in the purchase contract on site or by written confirmation. Vehicles with mileage over 50,000 km or older than 3 years are preferentially sold to our commercial customers.

Condition: used, maximum load weight: 2,580 kg, overall weight: 3,500 kg, axle configuration: 3 axles, first registration: 06/2024, loading space length: 6,550 mm, loading space width: 2,050 mm, loading space height: 580 mm, Year of construction: 2024, Welcome to Nutzfahrzeuge West GmbH! NEW!!! Chat with our sales advisor via WhatsApp: .----Ideal for large maxi transporters such as Sprinter/Crafter ... or 2 small vehicles TECHNICAL DATA: Lrsdpfx Afoxvwy Rozeg * Trailer type Merkur XL * Storage box * Gross weight 3500 kg * Payload 2582 kg * Internal dimensions L: 655cm, W: 205cm * External dimensions L: 920cm, W: 210cm, H: 65cm * Loading height approx. 58cm * Floor: aluminum perforated plate * Lashing points in perforated plate * Frame: welded steel, hot-dip galvanized * Electrics: 13-pin, 12V * Tires: 195/55R10 * Axle manufacturer: AL-KO * Number of axles: 3 * Braked axles * Support wheel standard * Anti-sway coupling AL-KO AKS 3504 * Hand winch standard AL-KO * Suspension with shock absorbers incl. 100 km/h approval * Wheel chocks

Condition: new, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, spindle speed (max.): 6,000 rpm, table width: 1,200 mm, table load: 6,000 kg, table length: 1,600 mm, workpiece weight (max.): 6,000 kg, torque: 1,178 Nm, power: 31 kW (42.15 HP), Equipment: rotational speed infinitely variable, BRAND NEW BED TYPE MILLING MACHINE WITH ROTARY TABLE Control and Motors: HEIDENHAIN TNC 640 digital path control HEIDENHAIN 19" TFT display HEIDENHAIN package (motors, measuring systems, and handwheel) ICS: Internal coolant supply, 36 bar Rotary Table: 1600 x 1200 mm – double motor drive system Ledehy At Aopfx Afzjrg Additional Equipment: Chain-type tool changer with double gripper, 40 positions Double hinged belt chip conveyor (longitudinal), one at the front and one at the rear Perimeter enclosure Accuracies: Positioning accuracy: 0.015 mm Repeatability: 0.008 mm Only inquiries from Germany will be answered.

Condition: good (used), Year of construction: 2008, Industrial robot Manufacturer: Kuka Model: KR60-3 Ledpfjunk Ixsx Afzorg Year of manufacture: 2008 Reach: 2033 mm Weight: 665 kg Payload: 60 kg Kuka control unit KRC2ed05 Weight: 185 kg Processor: 2GHz Operating system: WinXP Software version: V5.6.11 Kuka teach pendant KCP2ed05 Kuka connection cables 7m/15m 22126ä 1 unit

Condition: good (used), Industrial robots Manufacturer: Kuka Model: KR30-3, KR30-3 F, KR30L16-2 Model: KR60HA, KR60L30HA All models equipped with KRC4 control system Ljdpfx Afstui D Tjzjrg Kuka KR30-3 KRC4, year of manufacture 2014-2017 = several units in stock Kuka KR30-3 Foundry KRC4, year of manufacture 2018 Kuka KR30L16-2 KRC4, year of manufacture 2017 = several units in stock Kuka KR60HA KRC4, year of manufacture 2014 Kuka KR60HA KRC4, year of manufacture 2018-2019 = several units in stock Kuka KR60L30HA KRC4, year of manufacture 2017 = several units in stock

Condition: good (used), Year of construction: 2015, Industrial robot Manufacturer: Kuka Model: KR60-3 F Foundry Year of manufacture: 2015 Reach: 2033 mm Weight: 665 kg Payload capacity: 60 kg Kuka KRC4 control unit Year of manufacture: 2013 Ljdjunkb Sopfx Afzjrg Weight: 163 kg Software: KSS 8.5.4 Kuka touch panel Kuka connection cables

Condition: good (used), Year of construction: 2015, Industrial robot Manufacturer: Kuka Model: KR30-3 F Foundry Year of manufacture: 2015 Lrsdpfxeuni Epo Afzeg Reach: 2033 mm Weight: 665 kg Payload: 30 kg Kuka Controller KRC4 Year of manufacture: 2014 Weight: 163 kg Software KSS 8.5.4 Kuka touch panel Kuka connection cables

Condition: good (used), Year of construction: 2014, Industrial robot Manufacturer: Kuka Ljdpfxsn Uv Dij Afzorg Model: KR60L30-3 Year of manufacture: 2014 Approx. 15,600 operating hours Reach: 2,429 mm Weight: 665 kg Payload capacity: 30 kg Kuka controller KRC4 Weight: 150 kg Software version: V8.3.40 Kuka touchscreen panel Kuka connection cables

Condition: good (used), Year of construction: 2011, Industrial robot Manufacturer: Kuka Model: KR30-3 Year of manufacture: 2011 Reach: 2,033 mm Weight: 665 kg Payload: 30 kg Ljdpfxji Ezv Ne Afzorg Kuka controller KRC4 Weight: 150 kg Software V8.3.40 Kuka touch panel Kuka connection cables

Condition: good (used), Year of construction: 2016, Industrial robot Manufacturer: Kuka Model: KR30-3 Year of manufacture: 2016 Lsdpfx Asq Dz H Tjfzorg Reach: 2033 mm Weight: 665 kg Payload: 30 kg Kuka control system KRC4 Weight: 150 kg Software V8.3.40 Interface X11 Kuka touch panel Kuka connection cables 22126ä

Condition: good (used), Year of construction: 2004, Kuka Robot KR200-3 Year of manufacture: 2004 Reach: 2400 mm Weight: 1125 kg Payload: 200 kg Ledodfzz Espfx Afzerg 22126ä

Condition: good (used), Year of construction: 2014, Industrial robot Manufacturer: Kuka Model: KR30-3 Ljdpfx Afjq D Abvjzorg Year of manufacture: 2014 Reach: 2033 mm Weight: 665 kg Payload: 30 kg Kuka controller KRC4 Weight: 150 kg Software V8.3.40 Interface X11 Kuka touch panel Kuka connection cables

Condition: good (used), Year of construction: 2005, Robot Industrial robot KUKA Kuka KR60-3 Year of manufacture: 2005 Reach: 2033 mm Weight: 665 kg Payload: 60 kg Kuka control unit KRC2 Weight: 185 kg Lrsdofugzxopfx Afzsg Processor: 733MHz System: Win95 Software version: V4.1.7 SP08 Kuka teach pendant KCP2 Kuka connection cables 7 m / 15 m (newly painted) Can also be offered with a KRC2ed05 control unit Kuka control unit KRC2ed05 Weight: 185 kg Processor: 2GHz System: WinXP Software version: V5.6.6

Condition: good (used), Year of construction: 2017, Industrial robot Manufacturer: Kuka Model: KR30-3 Year of manufacture: 2017 Operating hours: 1,000 Reach: 2,033 mm Weight: 665 kg Payload: 30 kg Lredon Uv Sxspfx Afzjg Kuka controller KRC4 Weight: 150 kg Software: V8.3.42 Kuka touch panel Kuka connection cables 22126ä

Condition: used, machine/vehicle number: YF904UPPRA300xxxx, Year of construction: 2010, Please contact ATS Norway for more information Please provide reference number upon request: 18631 Specifications: - 2010 model - 3 axle - Disc brakes - Lift on 1 axle - Turn on 3 axles - Internal width in cabinet: 2,502 m - Internal Length in cabinet: 13,462 m - Internal height in cabinet: 2,799 m - Heating in box - Ready for delivery Description: There is lift on 1 axle and turn on 3 axles. There is heat in the box and full side opening. Some repair cost must be taken into account. Ready for delivery Technical approved: no Lrjdpfx Aex S Dtrofzog EU-approved until: 20.08.2024 Own weight: 9380 Total Weight: 39000 Payload: 29620 Width: 260 Length: 1386 Model: NTM 3 akslet semitralle m / full sideåpning

Condition: used, machine/vehicle number: 381xxxx, Year of construction: 1997, Please contact ATS Norway for more information Please provide reference number upon request: 18602 Specifications: - 1997 model - 3 + 1 - Hydraulic Forced steering on 3 and 4 axles w/remote control - Auxiliary axle included - New hydraulic unit for steering - Manual Width - Piece of 2 meters - 1.70 cm Hydraulic extension - A good number of hydraulic hoses have been replaced - The one hydraulic central unit sweats a little hydraulic oil - Delivery by agreement   Description: 1997 Vang trailer Auxiliary axle included. Push piece of 2 m comes with and Hydraulic extension of 1,700 m. In total, you will find an extension of 3,700 m. The trailer is manually extended. There is also forced steering on 3 and 4 axles. Delivery by agreement Technical approved: Yes Ledpfx Aswphkpefzerg EU-approved until: 07.03.2026 Own weight: 11550 Total Weight: 81000 Payload: 69450 Width: 250 Length: 1613 Model: ATHLS 3+1 Brønnhenger

Condition: used, machine/vehicle number: YV2R002D1KA84xxxx, mileage: 334,169 km, Year of construction: 2019, Please contact ATS Norway for more information Please provide reference number upon request: 20619 Car specifications: - 2019 model - 334,169 km (will increase slightly) - Eu-approved until: 09.11.25 - 664 hp - Euro 6 engine - I-Shift - Tires (see pictures) - Movable swing disc - Pressure relief - Suspension: full air - Movable swing disc Lrsdjwqwqhopfx Afzeg - Retarder - Webasto - 2 Beds - Coffee maker - Air conditioning/ac - Radio - Lights - Servichitorikk - Video Trailer specifications: - 2013 model - Eu-approved until: 09.10.25 - 3 Axles - 6 m extension - Lift on 2 axles - Tires (see pictures) - Friction steering on 3 axles - Stool included with - Ready for delivery Description: We have a 2019 Volvo FH650 6x4 Tractor w/ 2013 HRD 3 axle jumbo trolley w/ 6m extension for sale. Everything works as it should according to the owner. Everything is Eu-approved and can be put straight into production. Ready for delivery. Km: 334169 HK: 663 Technical approved: Yes EU-approved until: 09.11.2026 Own weight: 11000 Total Weight: 30000 Payload: 18925 Width: 254 Length: 674 Euro: 6 Gearbox: Automatic

Condition: used, Year of construction: 2017, Serial number: KMTPC258PHA03xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20940 Specifications: - Certified to: Not certified. Expired 03.25 Lrjdpfx Ajwx D U Aefzjg - Hours: Approx 4,400 - Engine: 50.7 KW - Weight: Approx 7,620 kg - Undercarriage: Good - Rototilt R3 (Recently overhauled electrically) - Central lubrication - Quick hitch - Plating bucket - Trenching bucket - Excavating bucket - Rubber pads - Central lubrication - Hydraulic shears - Extra hydraulics - LED Work lights - AC/Air conditioning Description: Excavator with rototilt, rubber pads and central lubrication. Rototilt has been overhauled electrically. 3 buckets and quick hitch included. According to the owner, there is no play and it works as it should. Ready for delivery. Own weight: 7620 Model: 2017 Komatsu PC78US-10 gravemaskin med rototilt og 3 skuffer. SE VIDEO

Condition: used, Year of construction: 2019, operating hours: 3,033 h, 2019 | Komatsu PC80MR-5E0 with 3 excavator buckets | Used Midi Excavator 7t - 12t | 3033 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Lodpjyapdwofx Afzerg 💰 Buy Now for EUR 51300 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 70 inspection points 69 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Very good general condition of the excavator. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40210 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2008, operating hours: 6,000 h, Drive: Track Serial number: 8xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21449 Specifications: 2008 model Hours: approx. 6,000 Power: 20.3 kW Weight: 3,590 kg Undercarriage (see pictures) Rubber tracks S40 quick coupler Machine width: approx. 170 cm Digging bucket Lrodpoxg Adijfx Afzsg Grading bucket Narrow bucket Extra work lights Dozer blade Radio/CD Air conditioning Description:Kubota U35 tracked excavator for sale with 3 buckets.The machine has been in regular use, and service has been performed accordingly.Ready for delivery.See video. Hours: 6000 Own weight: 3590 Width: 170 Kw: 20.3 Model: U35-3

Condition: used, Year of construction: 2007, pressure 170 t chamfer lenght 3000 mm distance between columns 2750 mm Stroke beam 200 mm max. opening beam/table 520 mm Ljdpfxsxyzy Nj Afzsrg C-recess 350 mm traveldistance X1+X2 cnc programmable 700 mm R1 and R2 axis controlled by cnc 250 mm Z1+Z2 axes controlled by cnc 0-2500 mm Quick speed,inspeed 100 mm/sec bendingspeed 0-10 mm/sec opening speed 100 mm/sec Number of working hours 36820 h length 3600 mm width 2200 mm height 2850 mm weight 12000 kg total power requirement 16,5 kW dimensions of the machine ca. 4x2,5x3 m Control Amada AMNC All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.