Used Sowing Machine for sale (65,489)

Condition: like new (used), Year of construction: 2023, operating hours: 2,509 h, functionality: fully functional, machine/vehicle number: 20240104, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller model: Heidenhein iTNC 640, spindle speed (max.): 10,000 rpm, For sale is a vertical machining center with only 2,509 program running hours (as of September 15, 2026)! The machine is in first-hand condition and was assembled directly by the manufacturer! Inspections or test machining are possible at any time by arrangement. TECHNICAL DETAILS Travel in X-axis: 1,600 mm Travel in Y-axis: 800 mm Travel in Z-axis: 800 mm Rapid traverse rate X-axis: 32 m/min Rapid traverse rate Y-axis: 32 m/min Rapid traverse rate Z-axis: 32 m/min Lodpfx Afsz Arkkouort Table length: 1,700 mm Table width: 800 mm Workpiece length max.: 1,700 mm Workpiece width max.: 800 mm Workpiece height max.: 800 mm Workpiece weight max.: 1,500 kg Number of spindles: 1 Spindle speed: 1 – 10,000 rpm Speed control: stepless Spindle motor power: 37 kW Tool holder: SK 40 Mounting diameter: 40 mm Torque: 235.5 Nm Air through the spindle: available Tool magazine positions: 60 Tool changer: operable from the front MACHINE DETAILS Control: Heidenhain iTNC 640 Internal cooling: 20 bar Filter unit: band filter unit Input voltage: 380 V Input current type: three-phase Program running hours: 2,509 h (as of September 15, 2026, machine is currently still in operation) Dimensions & Weight Dimensions (L x W x H): 5,800 x 4,300 x 3,000 mm Machine weight: 15,000 kg EQUIPMENT CE marking Chip conveyor Documentation/Manual Glass scales in all 3 axes Hexagon 3D infrared probing system Mobile electronic handwheel Internal cooling with 20 bar and band filter unit Air through the spindle Tool changer with 60 positions, operable from the front

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: A0220A1818, laser power: 3,200 W, overall weight: 11,700 kg, TECHNICAL DETAILS Laser power: 3,200 W MACHINE DETAILS Input voltage: 400 V Input frequency: 50 Hz Input current: 125 A Control voltage: 24 V Required fuse rating: 3 × 125 A Lodpfxez Ahrwj Afuort Compressed air connection: 7–10 bar Nitrogen connection (N₂): 30 bar Oxygen connection (O₂): 20 bar Connected power: 73 kVA Dimensions & Weight Dimensions (L x W x H): 9,229 x 6,145 x 2,200 mm Total weight: 11,700 kg EQUIPMENT CE marking Documentation / Manual Dust extraction Emergency stop switch Safety light curtain

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, controller model: SIEMENS SINUMERIK 840D SL, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 10 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Laser power: 4,000 W Sheet thickness, mild steel max.: 20 mm Sheet thickness, stainless steel max.: 15 mm Sheet thickness, aluminum max.: 10 mm Lens cutting head diameter: 250 mm MACHINE DETAILS Control system Control model: SINUMERIK 840D SL Screen: 17" touch color screen Voltage: 400 V Frequency: 50 Hz Electrical standard: IEC Lrsdpez Ay Rrsfx Afust EQUIPMENT Closed machine frame with integrated laser unit Torque drive in combination with linear direct drives CO₂ laser TruFlow 3200 with optimized standby mode High-frequency excitation Installation plans and installation conditions, 2 copies Motion unit for highly precise machining Closed beam guidance Single cutting head strategy Cooling unit Automatic pallet changer in the longitudinal direction Wide longitudinal conveyor belt Ergonomic control panel with touch color screen Work area lighting Position laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Transport and assembly device Maintenance-free turbo radial blower Gas mixer integrated Laser control TASC Laser power control Laser logbook function Lens cutting head with 250 mm lens Universal cutting device with bus connection LensLine with condition monitoring ControlLine: Height control and sheet edge detection Easy operation Simple workshop programming Advanced workshop programming Fast re-production Automatic shut-off ContourLine FastLine FlyLine Microweld Production plan AdjustLine Teleservice via internet USB interface RJ-45 network connection CE marking Light barriers Multi-chamber extraction system Compact filter unit Machine enclosure with Makrolon panels TruTops Laser initial license TruTops Laser secondary license TruTops Tube follow-up license Documentation TruLaser 3030 Documentation, 2 copies, 1 x paper / 1 x CD Note: The operating hours can be found in the last image.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 41,622 h, controller model: Siemens Sinumerik 840 D, laser power: 3,000 W, sheet thickness (max.): 25 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, For sale is a TRUMPF TruLaser 5030 fiber (L41) including LiftMaster Compact! The machine will remain powered on until September 23, 2026. Disassembly will be carried out by a certified TRUMPF partner. TECHNICAL DETAILS Laser power: 3,000 W Working area (X / Y / Z): 3,000 × 1,500 × 115 mm Lodpoz A S Dzjfx Afusrt Sheet metal thickness steel max.: 15 mm Sheet metal thickness stainless steel max.: 20 mm Sheet metal thickness aluminum max.: 15 mm Simultaneous speed max.: 235 m/min Accuracy: ± 0.1 Sheet metal format max.: 3,000 × 1,500 mm Sheet metal format min.: 1,000 × 1,000 mm Sheet metal thickness max.: 25 mm Sheet metal weight max.: 900 kg Stack height loading side max.: 90 mm Part size min.: 150 × 150 mm Sheet metal thickness max.: 25 mm Sheet metal weight max.: 900 kg Stack height unloading side max.: 250 mm MACHINE DETAILS Control model: Siemens SINUMERIK 840D SL Touch color screen: 17" Operating hours: 81,443 / 76,533 / 41,622 h Dimensions & Weight Dimensions (L x W x H): 9,373 x 2,964 x 2,383 mm Weight of base machine: 12,700 kg EQUIPMENT LiftMaster Compact 1530 AL21 Closed machine frame with integrated laser unit Torque drive in combination with linear direct drives Closed beam guidance via laser light cable (LLC) Machine cooling unit water-air Integrated control cabinets with interior lighting Automatic pallet changer in the longitudinal direction Wide longitudinal conveyor belt Power supply for TruDisk via the machine Work area lighting Positioning laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Solid-state laser TruDisk 3001 with one LLC output Light guide cable according to standard layout Laser cooling unit water-air Excitation via pump diodes Laser power control Laser logbook function Universal cutting head with fully adaptive lens system Protective glass against lens contamination Condition monitoring of the protective glass ControlLine for height control and sheet metal edge detection Simple workshop programming Extended workshop programming Fast reproduction Integrated technology data Automatic shutdown Programmable cutting gas pressure FastLine USB interface RJ-45 network connection CE marking Light barriers Multi-chamber extraction system Integrated compact dust extraction system Machine enclosure with certified viewing window and door on the right Synchron loader Scrap removal device and double sheet detection Movable removal rake Loading and unloading station Separation of thin sheet metal for synchronous loader Raw material and unpacking station Extended pallet extension on the machine Inventory interface

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 2,300 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 2,300 mm Travel range, Y-axis: 800 mm Travel range, Z-axis: 600 mm Work area, fixed table Work area, X-axis: 925 mm Work area, Y-axis: 800 mm Work area, Z-axis: 600 mm Clamping area: 1,400 × 750 mm Work area, rotary table Work area, X-axis: 780 mm Work area, Y-axis: 800 mm Work area, Z-axis: 600 mm Clamping area: 800 × 630 mm Tool holder: SK 40 Tool magazine: 30 positions Spindle speed: 50–12,000 rpm MACHINE DETAILS Control system: Heidenhain iTNC 530 Spindle: Kessler motor spindle EQUIPMENT 6th axis prepared Lrsdsz Epg Espfx Afuot Handheld control unit Internal cooling system with filter system Filter system: 500 l Chip conveyor Blum laser 2 extraction systems Machine hood

Condition: good (used), Year of construction: 2012, operating hours: 43,313 h, controller model: Siemens Sinumerik 840 D, laser power: 5,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser power: 5,000 watts Working area: 3,000 × 1,500 × 115 mm Max. sheet thickness, steel: 25 mm Max. sheet thickness, stainless steel: 20 mm Max. sheet thickness, aluminum: 20 mm Max. speed: 235 m/min Accuracy: 0.10 mm MACHINE DETAILS Control model: Siemens Sinumerik 840 D Operating hours: 66,934 h / 43,313 h Dimensions & weight Dimensions (L x W x H): 8,300 x 4,800 x 2,400 mm Weight: 12,000 kg EQUIPMENT Solid-state laser TruDisk 3001 with one LLK output Light guide cable according to standard layout Ledpfx Aoz D Evaefuort Laser cooling unit (water-air) Excitation via pump diodes Laser power control Laser logbook function Universal cutting head with fully adaptive lens system Protective glass against lens contamination Condition monitoring of the protective glass ControlLine: Height control and sheet edge detection

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, controller model: WinMax, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 762 mm Travel range, Y-axis: 508 mm Travel range, Z-axis: 610 mm Spindle speed: 12,000 rpm Table area: 1,020 × 510 mm Table load capacity: 1,500 kg MACHINE DETAILS Control system: WinMax EQUIPMENT Lsdpfjz Ahx Djx Afusrt Internal cooling system (ICS) Fourth axis

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 410 mm, controller manufacturer: Siemens, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range X: 560 mm Travel range Y: 410 mm Travel range Z: 410 mm Lrodpoz Ahxqefx Afujt Clamping area: 650 × 410 mm Table load: 250 kg Spindle speed: 12,000 rpm Tool holder: SK 40 MACHINE DETAILS Control system: Siemens

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 1,660 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: M+ Mazatrol, table load: 1,000 kg, TECHNICAL DETAILS Travel in the X-axis: 1,660 mm Travel in the Y-axis: 510 mm Travel in the Z-axis: 510 mm Table dimensions: 2,000 × 510 mm Table load capacity: max. 1,000 kg Spindle speed: 7,000 rpm Tool holder: SK 40 Tool magazine: 48 tools MACHINE DETAILS Control system: M+ Mazatrol Machine weight approx.: 7,500 kg Space requirement approx.: 5 m² EQUIPMENT Lredpfx Aez Ahw Hjfujt Chip conveyor: MAYFRAN 4th axis: Tilting rotary table: Rotamatik RM 100

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 29 h, roller diameter: 90 mm, sheet thickness steel (max.): 2 mm, overall weight: 520 kg, power: 1.1 kW (1.50 HP), working length: 1,270 mm, For sale is a like-new round bending machine with only 26 operating hours! TECHNICAL DETAILS Lredpfxjz Dw Emo Afuet Work area Working length: 1,270 mm Sheet thickness at 450 N/mm²: max. 2.5 mm Sheet thickness at 700 N/mm²: max. 1.5 mm Sheet thickness for conical bending of steel sheet: 2 mm Roller diameter: 90 mm Roller speed: 6 m/min Diameter of feed grooves: 4 / 6 / 9 mm MACHINE DETAILS Motor power, main drive: 1.1 kW Dimensions & Weight Dimensions (L x W x H): 1,850 x 700 x 1,200 mm Weight: 520 kg EQUIPMENT 3-roller round bending machine with asymmetrical roller arrangement Robust machine frame made of spheroidal graphite cast iron Induction-hardened rollers, also suitable for processing stainless steel Main motor with braking system for precise bending Swiveling top roller with eccentric locking for easy workpiece removal Wire feed grooves on the lower and rear rollers Conical bending device Manual adjustment of the rear roller Separate mobile control console with foot switch for left/right operation Emergency stop safety cable Side cover Operating manual

Condition: used, Year of construction: 2013, operating hours: 97,817 h, machine/vehicle number: S0631C0211, controller model: Simatic IPC627, laser power: 3,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 600 mm, Note: The machine indicates an error, which suggests a defect in the beam source. The replacement parts recommended by Trumpf cost approximately €30,000. TECHNICAL DETAILS Working Area Travel range X-axis: 3,000 mm Travel range Y-axis: 1,300 mm Travel range Z-axis: 600 mm Travel range B-axis: ±135° Travel range C-axis: n × 360° Working height: 605 mm Laser Model: TruDisk 3001 Laser power: 3,000 W Scanning frequency: 10 Hz–100 kHz Axis Speeds Simultaneous axis speed: max. 173 m/min X-axis: max. 100 m/min Y-axis: max. 100 m/min Z-axis: max. 100 m/min B-axis: max. 90 rpm C-axis: max. 90 rpm Accuracy Smallest programmable path increment: 0.001 mm Positioning deviation, linear axes X/Y/Z: max. 0.03 mm Positioning deviation, rotary axes B/C: max. 0.005° Positioning error, linear axes X/Y/Z: max. 0.08 mm Positioning error, rotary axes B/C: max. 0.015° MACHINE DETAILS Control and Data Processing Control model: Simatic IPC627 Hard disk storage: 60 GB Color monitor: 12" TFT Network speed: 100 Mbit/s Modem: 56 kBaud/s Pneumatics and Cutting Gas Connection pressure: min. 6 bar Connection pressure: max. 14 bar Compressed air consumption, machine: approx. 30 Nm³/h Compressed air consumption, short-term: max. 40 Nm³/h Cutting gas working pressure: max. 20 bar Electrical Connection Base machine: 47.0 kVA Laser unit TruDisk 3001: 19.5 kVA Laser unit TruDisk 4001: 27 kVA Cooling unit TruDisk 3001: 9 kVA Cooling unit TruDisk 4001: 12 kVA Operating hours: 97,817 h EQUIPMENT Hard disk with RAID controller USB interface Ethernet network connection Lsdpsz Dvfxjfx Afusrt RJ-45 connector Support for ET BEUI, TCP/IP, Novell Server, and NTFS file system Solid-state laser from the TruDisk series Fast rotary changer with tooling and control system Scrap conveyor for continuous removal of cut-outs and scrap grids

Condition: refurbished (used), Year of construction: 2005, laser type: CO₂ laser, laser power: 100 W, working length: 1,330 mm, working width: 1,630 mm, TECHNICAL DETAILS Working area (L × W): 1,330 × 1,630 mm Laser power: 100 W Laser source: CO₂ Lsdpfez D E Ddox Afuert Maximum material width: 1,575 mm Material pass-through: 15–50 mm (without material support) Speed: 1 – 1,414 mm/s Maximum acceleration: 14.1 m/s² MACHINE DETAILS Suitable for: Films, acrylic, wood, and textiles Dimensions (L × W × H): 2,730 × 2,450 × 1,590 mm EQUIPMENT i-cut Production Console software package

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 39.963TW, working height: 1,300 mm, planer shaft diameter: 60 mm, workpiece height (max.): 250 mm, workpiece width (max.): 300 mm, power: 18.5 kW (25.15 HP), A new two-sided planing machine is for sale! TECHNICAL DETAILS Processing: Two-sided planing (calibrating) Thickness tolerance: < ±0.1 mm Workpiece length min./max.: 800 / 3,200 mm Minimum length for continuous feed: 1,250 mm Workpiece width max.: 300 mm Workpiece height min./max.: 20–250 mm (each ±1 mm) Passage height: 280 mm Working height: approx. 1,300 mm Number of spindles: 2 Spindle diameter: 160 mm Planer shaft diameter: 60 mm Feed speed: 5–20 m/min, continuously adjustable Ram columns: 4 × Ø 110 mm MACHINE DETAILS Input voltage: 3 × 400 V AC Frequency: 50 Hz Ledpfx Afsz A Ubijuert Network type: TNS, for industrial networks Control voltage: 230 V AC / 24 V DC Power: 18.5 kW Power of feed motor: 9 kW Compressed air connection: 8 bar Electrical equipment: Télémecanique / MOELLER / SIEMENS Machine color: RAL 7035 Light Grey / RAL 3003 Ruby Red Cabinet color: RAL 7035 Light Grey / RAL 3003 Ruby Red Total weight: 7,000 kg EQUIPMENT Continuously adjustable feed speed Feed rollers individually and directly driven by separate gear motors Electronically synchronized feed rollers Grooved feed rollers in front of the planer shafts Smooth feed rollers at the outlet Hard-chrome-plated tables, feed rollers, pressure elements, and stops Automatic feed deceleration in case of overload Processing motors with electronic soft start controls Integrated DC motor brakes Télémecanique ALTISTART Control panel on a pivoting arm on the front wall of the cabinet

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, workpiece height (max.): 60 mm, roll diameter: 830 mm, On-site inspections while the machines are running are possible in Lithuania! Fully automatic edge banding line with the following machines: HOMAG PROFI KAL330/9/A3/WZ (year of manufacture 2013) HOMAG PROFI KAL370/8/A3/WZ (year of manufacture 2016) HOMAG PROFI TBL100/20/30/F infeed table (year of manufacture 2013) HOMAG POWER TWL410/25/LQ transfer system cross conveyor (year of manufacture 2016) TECHNICAL DETAILS HOMAG PROFI KAL330/9/A3/WZ & PROFI KAL370/8/A3/WZ edge banding machines Workpiece width without edge at a workpiece thickness of 12–22 mm: min. 60 mm (depending on the workpiece length) Workpiece width without edge at a workpiece thickness of 23–60 mm: min. 100 mm (depending on the workpiece length) Workpiece overhang: 30 mm Workpiece thickness: 12–60 mm Edge height: max. workpiece thickness + 4 mm Edge material on a roll: 0.3–3 mm Edge material height PVC: max. 135 mm Edge material height veneer: max. 100 mm Roll diameter: max. 830 mm HOMAG PROFI TBL100/20/30/F infeed table Roller diameter: 54 mm Roller spacing: approx. 60 mm Panel length: 240–2,500 mm Panel width: 120–3,000 mm HOMAG POWER TWL410/25/LQ transfer system cross conveyor Roller diameter: 64 mm Roller spacing: 110 mm Panel length: 240–2,500 mm Panel width: min. 240 mm Panel thickness: 8–60 mm Panel weight: max. 80 kg EQUIPMENT Clearance-type joining-cutting unit on both edge banding machines A3 basic gluing unit on both edge banding machines Clearance-type processing units on both edge banding machines FA11 finishing unit on the HOMAG PROFI KAL330 FA21 finishing unit on the HOMAG PROFI KAL370 Fixed stop on the left side of the infeed table Transport rollers on the infeed table Side conveyor belt on the infeed table Electropneumatically controlled cross guard on the infeed table Manually adjustable infeed guard Set of small parts Integrated air cushion table Fixed stop on the left side in the infeed and outfeed of the transfer system cross conveyor Infeed roller track with conveyor belt and cross transport Controlled cross conveyor in the infeed Outfeed roller track Controlled cross conveyor in the outfeed Electropneumatically controlled stop guard Lrjdjz A Tx Topfx Afujt Side transport belt Manually adjustable panel overhang

Condition: used, machine/vehicle number: 008013, X axis working area: 5780 mm Y axis working area: 1650 mm Working Table: Pod and Rail Ledpfx Aewuz Ekefuert Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 16 Total number of tool changer positions: 16

Condition: used, machine/vehicle number: 008238, X axis working area: 3660 mm Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 12 KW Number of controlled axes: 3 axes Total number of drilling spindles: 12 Lredpfx Ajx A E Tfefuet Total number of tool changer positions: 15

Condition: used, machine/vehicle number: 006488, X axis working area: 2500 mm Y axis working area: 850 mm Main Electrospindle power: 5 KW Lrsdpjwuclxjfx Afujt Number of controlled axes: 3 axes Total number of drilling spindles: 11

Condition: used, machine/vehicle number: 008700, X axis working area: 3050 mm Y axis working area: 1300 mm Main Electrospindle power: 7.5 KW Ljdpezq Ur Hefx Afuort Number of controlled axes: 3 axes Total number of drilling spindles: 52 Total number of tool changer positions: 6

Condition: used, machine/vehicle number: 005796, X axis working area: 3700 mm Lodpfx Ashwi U Tsfuort Y axis working area: 1550 mm Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Total number of drilling spindles: 10 Total number of tool changer positions: 8

Condition: used, machine/vehicle number: 007564, X axis working area: 3700 mm Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 10 KW Number of controlled axes: 3 axes Lrjdoum H Ekspfx Afuet Total number of drilling spindles: 12 Total number of tool changer positions: 13

Condition: used, machine/vehicle number: 008342, Max. panel width: 70 mm Max. panel length: 2100 mm Lrjdox A Tc Ujpfx Afuet No of injectors: 4 Lateral horizontal groups: yes

Condition: used, machine/vehicle number: 008014, Max. panel length: 1250 mm Lateral horizontal groups: yes Lrsdpfx Afowuz S Deuet

Condition: used, machine/vehicle number: 007649, Max working width: 600 mm Lrsdpsu Eviqefx Afust Gluing System: EVA Hotmelt

Condition: used, machine/vehicle number: 008703, X axis working area: 3650 mm Y axis working area: 1600 mm Working Table: Flat table Main Electrospindle power: 15 KW Number of controlled axes: 3 axes Total number of drilling spindles: 37 Total number of tool changer positions: 18 Lodpfxezq Ur Tj Afuert

Condition: good (used), Year of construction: 1973, FELLOWS 70-15 GEAR SHAPER - Model 70-15 Fellows heavy duty vertical gear shaping machine , suitable for the manufacture of external straight spur gears up to 70" pitch diameter, as well as internal spur gears and splines within a range of 0" to 88" pitch diameter, regardless of shaper-cutter radius. This unique feature, combined with the machines 15" face-width capacity and 1.7DP cutting capability in steel, provide a formidable platform for producing a wide range of larger geared part members. Lredpfx Afortrxijujt Equipped with: * Machine Main Base With Work-table, Upper Column, Cutter Ram and Slide of "Super Robust" Construction * Machine with "Saddle Backoff" Method of Cutter Relieving * Cutter Spindle 6.25" diameter w/Standard Straight Spur Guide * Cutter Positioning via Stroke Jog-Button * Rapid Rotation of Work Spindle for Trueing Work-Piece * Rapid Saddle Traverse for Traversing Saddle Relative to Work * Automatic Depth Feed Mechanism for One to Four Cuts, With 4 Speed Motor Providing Speed Change on Finishing Cut * Assorted Work and Feed Change Gears * Assorted Stroke Change Gears * 2" Riser Plate * Main Drive Motor 15HP, 650/220 rpm, 240 Volt 60Hz w/Westinghouse Rectifier Unit for AC * Power Forced Lubrication to Working Elements with "Lubriquip Lub Controller" * Coolant Tank, Pump, and Piping, With Chip Pan * Full Complement of Electrics * Assorted Guards, Covers * 84" T-Slotted Table * Hydraulic System * Work Lamp * Work Platform * Cutter Adaptor * Manuals Specifications: Max. Diameter External Gear Cut (Nominal): 70" Max. Diameter Internal Gear Cut (Nominal): 88" Max. Diameter Workpiece Accommodated: 104" Worktable Diameter: 84" Max. Permissible Weight of Workpiece & Fixture: 36,000 Lbs. Max. Distance Workspindle Centerline to Centerline of Cutter Spindle: 35" Min. Distance Workspindle Centerline to Centerline of Cutter Spindle: 0" Max. Work & Fixture Clearance Height w/Cutter Spindle in Upper Position: 28" Max. Diametral Pitch (full length teeth): 2 DP Max. Diametral Pitch (stub teeth): .75 DP Max. Diameter Pitch (30P.A. splines): 2-5/5 DP Diameter of Cutter Spindle: 6.25" Max. Stroke Length: 19.118" Max. Face-Width (nominal): 15" Stroking Speeds (infinitely variable): 5 to 122 S.P.M. Max. Infeed of Cutter Ram: .0020 inch/min. Min. Infeed of Cutter Ram: .0005 inch/min. Max. Rotary Feed Per Stroke (per 1" of cutter diameter): .0068"/Min. Min. Rotary Feed Per Stroke (per 1" of cutter diameter): .0006"/Min. Approximate Machine Dimensions: 192"L x 144"W x 150"H Approximate Machine Weight: 95,000 Lbs.