Used Spinning Machine Metal for sale (84,891)

Condition: used, Vertical band saw PEHAKA type SM 4 make no. 27060 year of construction approx. 1980 throat 380 mm table size 620 x 480 mm cutting height 250 mm roller diameter 400 mm working height 1120 mm saw band length min. 2900 - max. 3100 mm saw band speed 22-125 m/min. infinitely variable motor power 0,6 / 0,75 kW mains connection 380 volt, 50 Hz - infinitely variable saw band speed via Vario belt drive with lever adjustment and 2 motor speeds - saw table tiltable +/- 15 - Saw blade butt welding machine IDEAL BS 0-16 - Saw blade shear - substructure made of U-steel 100 x 50 mm , movable with lift truck space requirement L x W x H 1050 x 800 x 1950 mm weight 355 kg Lhodpjiv A U Eefx Ab Njp good condition

Condition: new, Year of construction: 2025, 3-jaw chuck 200 mm Max. turning diameter over bed 410 mm Turning diameter over cross slide 255 mm Turning diameter in bridge recess 580 mm Center distance 1000 mm Center height 205 mm Top slide travel 140 mm (accurate 0.02 mm) Cross travel 210 mm (accurate 0.02 mm) Longitudinal travel 750 mm (accurate 0.2 mm) Bed width 250 mm Spindle bore 52 mm Spindle nose D1-6 CAMLOCK Spindle taper MK6 Lathe post dimensions 100 × 100 × 32 mm Max. tool dimensions 20 × 20 mm Spindle speeds: 16 ranges, 45 – 1800 rpm Spindle speed range: 45, 70, 90, 108, 140, 165, 215, 255, 330, 385, 510, 585, 770, 900, 1170, 1800 rpm Metric thread (42) 0.2 – 14 mm/rev Inch thread (42) 2 – 72 TPI Modular thread (18) 0.3 – 3.5 mm D.P. thread (21) 8 – 44 DP Longitudinal feed range (17) 0.05 – 1.7 mm/rev Cross feed range (17) 0.025 – 0.85 mm/rev Tailstock quill diameter 50 mm Tailstock quill stroke 120 mm (accurate 0.02 mm) Tailstock quill taper MK4 Lhedpfoxdbxyjx Ab Nsp Main motor power 2.2 / 3.3 kW Coolant pump power 90 W Dimensions (L × W × H) 2050 × 900 × 1650 mm Weight 1600 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, working width: 6,000 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness steel (max.): 3 mm, Equipment: documentation/manual, The face design of the segmental machine structure and the swing-mounted bending beam on the kinematic mechanism enable the bending of various complex shapes from steel and aluminum sheet with a maximum bending angle of 145 degrees and a maximum upper beam stroke of 200 mm. Lhsdpsxflfmefx Ab Njp The machine is controlled by a three-axis programmable controller, allowing operation in three modes: Manual, single – includes one program consisting of a single bending stage and one backgauge setting, which can be repeated any number of times. The program comprises 60 programmable blocks, each containing 10 bends and backgauge positions. The machine can bend steel sheet up to 3 mm thick and aluminum up to 4 mm. The hydraulic oil has been replaced and the entire control system has been renewed.

Condition: excellent (used), KD-PUTZ with dimple Completely made of stainless steel Sheet metal fettling machine for perforated plates normal plates with 2 edge for 60x80 sheets on the short side edge Top condition Connection 16 Ah Lsdegh A Svopfx Ab Nshp

Condition: reconditioned (used), functionality: fully functional, Year of construction: 1995, controller model: ATL 595, working width: 3,100 mm, power: 19 kW (25.83 HP), bending force (max.): 200 t, distance between stands: 2,600 mm, Refurbished machine Haco press brake type PPH 3m x 200T New ATL 595 controller Motorized back gauge X axis European Standard type punches Monoblock die Lhjdpsxanm Asfx Ab Nop

Condition: like new (used), Manual machine sold with tooling Eckold HF 80 CF Hand Former For Sale The Eckold HF 80 CF hand former is a specialised and versatile machine designed for sheet metal forming and shaping applications. Renowned for its precision and user-friendly operation, this hand former delivers the flexibility necessary for complex forming tasks. The HF 80 CF is capable of processing a variety of materials and thicknesses, making it an ideal choice for jobs requiring accuracy and craftsmanship. Lhodpfx Aewzkzbjb Nsp Buy a Used Eckold HF 80 CF Hand Former Opting for a used Eckold HF 80 CF hand former offers several advantages. Although this is a pre-owned machine, each hand former undergoes thorough inspections to ensure its quality and functionality. The platform offers a streamlined purchasing experience, with nationwide delivery across the UK and international shipping options available. This combination of versatility, precision, and ease of purchase makes investing in the Eckold HF 80 CF hand former a strategic decision for businesses and craftsmen seeking a reliable, efficient solution for sheet metal forming.

Condition: used, Pneumatic folding and edging machine FASTI Type 606 - 11 - 1.0 Folding machine for pre-forming sheet metal seams For producing a seam bend Seam bending machine for thin sheet metal as an alternative to a press brake Serial no.: 9166002 Year of manufacture: 1991 Working length: 1100 mm Material thickness at 45 kg/mm²: 1 mm Compressed air requirement: 6 bar - pneumatic foot switch - roller adjustment via threaded clamping screws Required space (L x W x H): 1600 x 300 x 1050 mm Weight: approx. 250 kg Good condition The seam is the doubling over of the sheet metal edge (1x folded over) to increase the stiffness of the sheet. By folding over, a rounded edge is created, reducing the risk of injury from sharp sheet edges. Ideal for metalworking applications such as sheet metal furniture, cladding panels, or for the production of ventilation and silencer components. Ljdpfxodzqblj Ab Njhp

Condition: new, Year of construction: 2025, Very small and high sensitive Metal Detector, flexible setting of detector head, suitable for detecting small products and specials applications. - Specifications: stainless steel framework; weight of product: max. 1kg; detecting speed: 0.17-1m/sec; detecting accuracy: FE from Ø 0.6mm, SUS from Ø 1.8mm; tunnel size WxH: 150x100mm; max. passing size WxH: 110x60mm; power: 220V/0.15kW, 50Hz/60Hz; dimensions and weight: L940xW500xH1198mm, 100/200kg. Lhodpev Nm E Hsfx Ab Njp Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: excellent (used), Year of construction: 2007, Technical data: Lhjdpfxjw U Dmij Ab Nsp Material thickness: 0.5 – 20 mm Max. processing width: 1500 mm Number of units: 3 Infinitely variable feed: 0 – 4 m/min Grinding motor drive power: 4 x 3.0 kW Motor power: 12.6 kW Dimensions (L x W x H): approx. 2730 x 1500 x 1550 mm Weight: approx. 2.3 tons Application areas: Double-sided deburring of flame-cut, punched, laser-cut, autogenously cut parts, as well as waterjet-cut components Condition: Very good condition, due to little use Operating hours: 35,000 Scope of delivery: Machine with LISSMAC extraction system

Condition: good (used), 1 used, well-maintained 3-in-1 combined hydraulic folding machine – press brake and guillotine shear FOLDING MACHINE: Working length: 3050 mm Working length between uprights: 3150 mm Sheet thickness (steel, at full length): 3 mm Throat depth: 500 mm Upper beam stroke: 300 mm Upper beam forward speed: 35 mm/s Upper beam return speed: 100 mm/s Max. bending beam working speed: 90°/s Backgauge adjustment travel (electric): 750 mm Number of bending programs: 6 PRESS BRAKE: Max. working pressure: 75 t Working length: 3050 mm Working length between uprights: 3150 mm Throat depth: 120 mm Stroke: 285 mm Lhjdpewyvxiefx Ab Nop Forward speed: 35 mm/s Working speed: 10 mm/s Return speed: 100 mm/s Backgauge adjustment travel (electric): 750 mm Number of angle programs: 6 GUILLOTINE SHEAR: Cutting capacity (steel, 45 kg strength): 4 mm Cutting length: 3050 mm Cutting angle: 1° 20′ Strokes per minute (unloaded): 20 Number of hold-downs: 20 Pressure per hold-down: 250 kp Throat depth: 370 mm Backgauge (electric adjustment): 750 mm Net weight: 9100 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2007, controller model: ATL 550, working width: 4,100 mm, bending force (max.): 135 t, distance between stands: 3,600 mm, Refurbished machine Haco press brake type PPM 4m x 135T ATL 550 control Motorized back gauge X-axis Manual crowning table Monobloc punch Lsdpfxexanlfe Ab Nohp Monobloc die

Condition: new, Year of construction: 2024, 5 Axes FSCUT 3000S CNC Control System DELTA Servo Driver & Motor System Hiwin Guide Liner SMG / KH Rack Raytools / BLT Series Cutting Head HanLi Chiller SMC Proportional Valve. Lhjdpfxenr Hgho Ab Nop Dairuike Auto Pneumatic Clamp φ220mm Various Diameter Wheels Pneumatic Support Loading Assist System Gross weight around 5.5ton

Condition: used, Clamping plate, machine table with metal base Clamping table, assembly table, clamping angle plate Clamping surface: 1200 x 370 mm T-slot spacing: 90 mm Table height: 870 mm - The T-slot table was originally a machine table from a milling machine - 4 T-slots, 16 mm - Metal base with height-adjustable feet - Multilayer wood plate L x W x H 1200 x 400 x 18 mm Overall dimensions L x W x H 1400 x 770 x 870 mm Weight: 250 kg Ljdpfewkvi Nox Ab Nohp good condition

Condition: new, Year of construction: 2025, High-speed Metal Detector for the use in high-speed production lines, stainless steel framework, touch screen. - Specifications: detecting speed 0.2-1.7m/sec; detecting accuracy: FE from Ø 0.8mm, SUS from Ø 1.8mm; tunnel size WxH: 300x120mm; max. passing size WxH: 250x80mm; power: 220V/0.3kW, 50Hz/60Hz; dimensions and weight: L1505xW600xH890mm, 150/250kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Lsdpfxjv Nm Hdo Ab Nehp

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2018, control type: CNC control, controller model: Easybend 2D, working width: 3,600 mm, back gauge: 800 mm, total length: 3,600 mm, bending force (max.): 135 t, distance between stands: 3,100 mm, Refurbished machine Lhjdpfx Abexamcvo Nop Haco press brake type ERMS 3.6m x 135T Motorised back gauge X axis Manual quick-clamping system for punches European System type punches Standard European type dies

Condition: used, Strip Processing Line, Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Very well equipped with feed-in aids Required floor space for the entire line (L x W): approx. 7000 x 3000 mm Total weight: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rolls: 7 Straightening roll diameter: Ø 40 mm Number of pinch rolls: 2 Pinch roll diameter: Ø 80 mm Entry height/pass-through height: 1500 mm - Straightening rolls hardened, ground and hard-chromed, with central support - Pinch rolls hardened, ground and hard-chromed, with hydraulic lifting - Manual straightening roll adjustment - Feed assist with hydraulically extendable tongue and hydraulically adjustable deflection pulley - Adjustable side strip guides - All straightening rolls driven via distribution gearbox and cardan shafts Lhsdpfjif Sg Ssx Ab Nep - Both pinch rolls driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightener opening stroke 250 mm for cleaning or for processing thicker material, lifting by trapezoidal-thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Net weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Outer coil diameter: max. 1600 mm (with load carriage) Outer coil diameter: max. 2000 mm (without load carriage) Diameter of coil turntable: Ø 1700 mm Coil inner diameter, expansion range: 460–520 mm Coil width, nominal: max. 630 mm Expansion jaw width: 750 mm Height of decoiler drum above base plate: 1500 mm - Decoiler drum driven by hydraulic motor and gear - Pneumatic overrun brake on the decoiler drum (TWINFLEX) - Hydraulic expansion of the decoiler drum, centrally via wedge slider system - Hydraulic pressure arm with hydraulically driven double pendulum roller - Coil loading carriage with 12-ton lifting capacity and 300 mm stroke - Decoiler on elevated travel frame with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Net weight: approx. 5 tons Central Hydraulic Power Unit (adjacent) Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2x REXROTH tandem pumps - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Net weight: approx. 800 kg Electrical Cabinet (adjacent) - All cable connections via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Net weight: approx. 800 kg

Condition: new, Year of construction: 2025, Combination of Metal Detector and Weigh Checker. With two recect devices to check if product metallic impurities and/or meets target weight. - Specifications: stainless steel framework, weight range: 5-990g; detecting speed 0.2-0.75m/sec; detecting accuracy: FE from Ø 1.0mm, SUS from Ø 2.0mm; target weight accuracy: ± 0.5g; tunnel size WxH: 330x150mm; max. passing size WxH: 280x110mm; power: 220V/0.35kW, 50Hz/60Hz; dimensions and weight: L1700xW600xH900mm, 160/260kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Ledpov Nm Hwjfx Ab Njhp

Condition: excellent (used), total length: 4,000 mm, Overhauled used machine Haco press brake type PPME 4m x 160T Motorized X-axis backgauge, adjustable with + and - buttons 4 manually movable fingers Used European System punches 4m long monoblock die in good condition Ledpfxetz Sg Aj Ab Nshp

Condition: used, Hand - swing bending machine KRAMER type AMS 650 x 1,5 Hand swivel bending machine, press brake year of construction approx. 1985 working length 650 mm sheet thickness at 40 kg/mm2 1,5 mm upper beam opening approx. 60 mm bending beam adjustment ca- 0-25 mm bending angle 0-180 Lhodpodzqaasfx Ab Njp - Upper beam adjustment via hand crank - pre-screw rail for the bending beam - one-piece sharpening rail 135° space requirement L x W x H 1200 x 600 x 1100 mm weight 160 kg good condition

Condition: new, Year of construction: 2025, Metal Detector to check vertical falling products. The product is passed from above through a hopper. Ideal to combine with multi head weigher and vertical packaging machine. Stainless steel framework, touch screen. - Specifications: detecting accuracy: FE from Ø 0.6mm, SUS from Ø 1.8mm; tunnel size: Ø 100mm; power: 220V/0.05kW, 50Hz/60Hz; dimensions and weight: L50xW50xH40mm, 45/145kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Lhsdpfx Ajv Nm Eysb Nep

Condition: used, Swivel bending machine KRAMER type A-Maut. II 1000 No. 48 287 Year of construction 1990 effective length 1060 mm max. sheet thickness 3.75 mm Stroke of upper beam 180 mm Adjustability of the folding beam 60 mm Backgauge 480 mm Drive power of folding beam drive 4 kW Drive power upper beam drive 1.5 kW Mains connection 400 Volt, 50 Hz Lhodofnabyspfx Ab Nep - Manual and semi-automatic control - Angle adjustment via angle preselection disk - one-piece pointing rail 135° - backgauge with hand crank adjustment and simple measuring scale - Continuous fence rail - Electric foot switch, 3-position Space requirement L x W x H 2200 x 1350 x 1500 mm Weight approx. 2.3 tons good condition

Condition: new, Year of construction: 2025, Metal Detector for food and other (e.g. medical, chemical, textile) products, also suitable for wet products, stainless steel framework, touch screen, easy integration into existing production line. - Specifications: weight of the product: max. 50kg; detecting speed: 0.5m/sec; detecting accuracy: FE from Ø 1.5mm, SUS from Ø 2.5mm; tunnel size WxH: 450x250mm; max. passing size WxH: 410x210mm; power: 220V/0.45kW, 50Hz/60Hz; dimensions and weight: L1800xW800xH950mm, 180/280kg. Ledpev Nm Hkefx Ab Njhp Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Lodpfxjhmmfks Ab Nehp Weight 8.5 tons. Good condition

Condition: new, Year of construction: 2025, Metal Detector for food and other (e.g. medical, chemical, textile) products, stainless steel framework, touch screen, self-learning system. - Specifications: weight of the product: max. 5kg; detecting speed: 0.2-0.8m/sec; detecting accuracy: FE from Ø 1.0mm, SUS from Ø 2.2mm; tunnel size WxH: 350x175mm; max. passing size WxH: 300x135mm; power: 220V/0.3kW, 50Hz/60Hz, dimensions and weight: L1545xW1114xH1383mm, 150/250kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Lhodjv Nm E Topfx Ab Njp

Condition: new, Year of construction: 2025, Metal Detector for food and other (e.g. medical, chemical, textile) products, also suitable for wet products, stainless steel framework, touch screen, easy integration into existing production line. - Specifications: weight of the product: max. 5kg; detecting speed: 0.5m/sec; detecting accuracy: FE from Ø 1.5mm, SUS from Ø 2.0mm; tunnel size WxH: 125x250mm; max. passing size WxH: 100x215mm; power: 220V/0.3kW, 50Hz/60Hz; dimensions and weight: L1627xW528xH1420mm, 110/210kg. Lhsdpov Nm Hqsfx Ab Njp Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.