Used Splinters Separator for sale (6,858)

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, type of input current: three-phase, overall weight: 400 kg, input voltage: 400 V, suction capacity: 6,000 m³/h, input frequency: 50 Hz, Equipment: type plate available, Oil mist and fume extraction unit for CNC machines, Plymovent brand separator filter. Designed for purifying air from metalworking processes involving high-viscosity, contaminated, or burnt oil, including: CNC machines for cutting, drilling, and sharpening; metal forming machines; oil mist generated by heat and surface treatment. Simple to operate and reliable filter design. Filter housing made of galvanized steel sheet coated with powder paint. The filter is equipped with a pressure gauge indicating the filling level of the filter element. Fan in a sound-absorbing housing, 4 kW (three-phase) POWER: FA-6000 Capacity up to 6000 m3/h Nwodpfj Ad Dnbox Aaton Inlet diameter - 250 mm Dimensions: Filtration unit: 0.85m x 0.70m x h-2.41m Fan: 1.20m x 1.10m x h-1.30m Stock number: 0027

Condition: used, Year of construction: 2013, Overview This Cermex F38741, built in 2013, is an automatic cardboard case erector that forms shipping cases from flat blanks for an end-of-line packaging setup. Blanks are taken from the magazine, erected, the bottom flaps are folded and closed, and the open case is discharged on the outfeed rails to the downstream packer. The machine comes from a wine packaging operation and has been dismantled and stored. Technical data - Manufacturer: Cermex - Model: F38741 - Year of manufacture: 2013 - Machine type: automatic cardboard case erector - Output: up to 40 cases per minute - Power supply: 400 V, 50 Hz, 3P+N+PE, 23 A full load - Control: Siemens SIMATIC S7-200 PLC (CPU 224) Equipment - Blank magazine with infeed chain and lugs - Erecting station with pick-up head on a cable-chain carriage - Bottom flap folding and closing section - Outfeed rails for the erected cases - Enclosure with transparent safety doors and signal tower - Separate control cabinet with Siemens operator panel, emergency stop and control transformer - CE marked Condition Nwjdpfxj Afdr Ne Aatjn Dismantled and stored. An inspection is possible. Availability Available immediately. Location: France.

Condition: used, Year of construction: 2011, Horizontal machining center Burkhardt + Weber Type/Model: MCX 900 Condition: Used Year of manufacture: 2011 Operating hours: 27,289 h Control system: Siemens 840D Technical data Working area and workpiece capacity Travel ranges X / Y / Z: 1,650 mm / 1,600 mm / 1,500 mm Interference circle: 1,850 mm across the entire X travel range Pallet size: 1,000 x 800 mm Max. pallet load: 3,000 kg Tilting moment for pallet machining up to 40,000 Nm Pallet design: T-slots Main spindle Tool holder: SK 50 Gear unit: 2-stage Spindle speed up to 8,000 rpm Spindle power: 37 kW (S1) Spindle torque: 1,220 Nm (S1) Tool management Magazine with over 200 tool positions Max. tool weight: 40 kg Tool tilting moment up to 120 Nm Tool taper cleaning Tool loading via the spindle Tool planning system on the spindle Mechanical drill break detection up to 750 mm Coolant system Coolant tank volume: 2,500 liters Paper band filter Nodpfe Afpnijx Aatewn High-pressure coolant system: 70 bar Adjustable coolant pressure Cooling unit Flushing of pallet support Workpiece flushing Coolant spray gun Automation and hydraulics Linked to a robot cell Year of manufacture of the robot cell: 2013 Fixture hydraulics Hydraulic connection on the pallet changer Hydraulic connection in the working area Hydraulic connection to the pallets Hydraulic extension for clamping pressures over 60 bar Equipment: Process monitor iCut Collision monitoring system Brankamp CMS UPS 4-way light stack Quoted item: Shipping costs will be provided in a separate offer.

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 18378, operating hours of spindle: 30,620 h, For sale is a highly precise and dynamic 5-axis CNC universal machining center from the reputable manufacturer DECKEL MAHO, model DMU 80 P hi-dyn, manufactured in the year 2000. This machine comes from the proven "hi-dyn" series (High Dynamics), which is characterized by extremely fast rapid traverse speeds, high acceleration values, and a robust portal design. It is ideally suited for highly precise 5-sided and 5-axis simultaneous machining in demanding tool, mold, and prototype construction. The machine is in operational condition and impresses with the combination of large travel ranges, an NC swivel rotary table, and stable machine kinematics. Equipment: - Rotary table - mounted special clamping device - 2 precision vises - viewing window - Heidenhain TNC426 control unit - 60-position tool changer SK40 - chip conveyor - separate coolant system with band filter Attractive offer – flexible & worry-free We offer you not only a high-quality product but also customized financing options that adapt to your needs. Whether it's a down payment, installment payments, or individual financing models – together we will find the right solution. Nodpfx Aas Afphiotswn On request, we can also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process, so you don't have to worry about anything. 📞 Please contact us for further information or a non-binding offer. We will provide you with personal and competent advice. Subject to prior sale, changes, and errors!

Condition: new, Technical data for the base plate: Shelving system: Bito Type: Pro Included in the scope of delivery: 01x Base plate, new Material color: Sendzimir galvanized Type: M Nwsdpfx Ae Afn U Ioatjn For frame profile: P4, P5, P6 Material thickness: 6 mm Overall width: 150 mm Overall depth: 105 mm Height: 32 mm Weight per piece: 0.66 kg / piece Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for pickup only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Condition: new, Technical data for the base plate: Shelving system: Bito Type: Pro Included in delivery: 01x Base plate, new Material color: Sendzimir galvanized Type: L For frame profile: P1, P2, P3 Material thickness: 5 mm Overall width: 120 mm Overall depth: 105 mm Height: 30 mm Weight per piece: 0.44 kg / piece Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: Nodpfe Afg U Tox Aatewn This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Condition: ready for operation (used), Year of construction: 2023, controller manufacturer: TRUMPF, controller model: Touchpoint TruBend, overall weight: 30,000 kg, total width: 5,150 mm, total height: 2,995 mm, product length (max.): 6,500 mm, Folding machine manufactured in 2023. This TRUMPF TruBend Center 7030 (B34) features a maximum bending edge length of 3,123 mm and a holder clamping force of 101 t. It includes a 2-axis part manipulator with a travel of 2,653 mm and an automatic loading/unloading system. If you are looking to get high-quality bending capabilities, consider the TRUMPF TruBend Center 7030 (B34) machine we have for sale. Contact us for further details. • Construction: Welded steel frame; Bending system: Wedge drive; Crowning: Included, adjustable via control • Capacities • Max bending edge length: 3,123 mm • Min bending edge length: 200 mm • Min bending width with standard holder: 145 mm • Min bending width with ENW tools: 40 mm • Max box height: 220 mm • Holder clamping force: 101 t • Material thickness: min 0.4 mm; max structural steel 3.0 mm; max stainless 2.2 mm; max aluminum 4.0 mm • Manipulation and positioning (integrated) • 2-axis part manipulator with 12 suction modules; X travel 2,653 mm; stroke 100 mm • 5-axis rear stop; Rotary manipulator; Front stop; Loading pincers • Automatic part positioning and rotation • Speeds • Y-axis rapid traverse: 250 mm/s • Front stop: 3,000 mm/s • Part manipulator: 3,000 mm/s • Rotary manipulator: up to 3 rev/s • ToolMaster Bend: 2,400 mm/s • Positioning accuracy • Y: 0.10 mm; X: 0.05 mm; R: 0.05 mm • CNC control • 21.5" touchscreen; Windows 7 Ultimate 64-bit; keyboard and mouse • USB; RJ45; Ethernet 10/100 Mbit/s; Internet teleservice/remote diagnostics • Programming software • TecZone Fold floating license • Automatic programming from 2D/3D, automatic bending program generation • 3D bending simulation; collision checking; manual program modification • ToolMaster Bend (automatic tool handling) • Automatic hold-down tool positioning and setup per program • Automatic positioning of standard, Pick&Place, and curved holders • Included tooling • 16 standard hold-down tools (160 mm each) • 6 Pick&Place hold-down tools; segments 10/15/20/40 mm • Corner hold-down tool, length 199 mm • OBW90 and UBW90 bending tools • ENW equipment • ENW function for tilting hold-down tools • ENW110-40 tool, length 3,123 mm, depth 40 mm • Min bending width with ENW: 40 mm • Bend angle measurement • Optical bend-angle assistance with integrated camera • Graphical comparison of programmed vs. actual angle • Minimum part-side length for angle measurement: 10 mm • Safety • CE certification; rotating safety doors; safety light barriers • Working-area access protection; foot switch with enable; emergency stop • Electrical power supply: 80 kVA Additional equipment • Automatic loading/unloading system with storage interface • Automatic blank separation and feeding; transfer to bending center • Automatic finished-part unloading with belt conveyor • Max blank size: 3,048 x 1,500 mm • Storage interface included • Loading trolley: not included Nedpfx Ae Afpmlsatewn • Rail set: not included • Additional part handling modules • 12 three-surface vacuum modules (upper/lower/front suction) • 6 magnetic modules and 4 two-surface magnetic modules • Vacuum and magnetic modules can be used together • Identification and connectivity accessories • Wireless 2D code reader with Bluetooth • Barcode and DataMatrix code reading • Automatic production program loading

Condition: used, mileage: 32 km, power: 125 kW (169.95 HP), first registration: 10/2026, fuel type: diesel, overall weight: 3,205 kg, color: white, gearing type: automatic, number of seats: 8, total length: 5,050 mm, total width: 2,275 mm, total height: 2,002 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal number: CHO26.TB19246 Errors and prior sale excepted! ----LOCATION: 04425 Taucha, Gerichtsweg 4 Phone number for inquiries: Mr. Ralph Bergel or bergel(at) ----SPECIAL EQUIPMENT * Trailer hitch, electrically swiveling * Battery: H8 AGM dual battery * Exclusive package: Panoramic sunroof - Rear seat package 21 (6 rear seats, sliding doors, left and right, 2nd row with 3 individual seats, outer seats heated, middle seat with folding table on the backrest, 3rd row with individual seats) - B&O speakers - Ambient lighting * Ford audio system with 13-inch multifunction display and Ford SYNC 4 including navigation * Fuel tank 70 l * Heated steering wheel * Matrix LED headlights, adaptive - LED low beam including all-weather light - LED high beam, glare-free - LED daytime running lights including integrated LED turn signals at the front - LED cornering light, static - Speed-dependent headlight range adjustment - LED taillights * Sliding door, electric, left and right - with hands-free function and including sun protection roller blinds in the 2nd row - Ford Key Free system including Ford Power-Start function * Auxiliary heater (fuel-water heater) with remote control * Technology Package 6: Exterior mirrors, electrically adjustable, heated and foldable - Blind Spot Assist including CTA with trailer detection - Rear cross-traffic alert - Pre-Collision Assist, camera and radar based - Driver fatigue warning - Lane Keeping Assist, lane departure warning, lane change assist, lane centering - Traffic sign recognition - Wrong-way driver warning function - Parking pilot system front/rear - Adaptive cruise control with Stop&Go function - Intelligent speed limiter with speed limit display - Surround view camera - Steering wheel, Sensico leather-look FURTHER EQUIPMENT * 3 USB ports for the 2nd row * ABS * Airbag, passenger side - with airbag deactivation function * Airbag, driver side * Airbag: Side airbags - left and right * All-wheel drive * Overhead console * Roof rails, silver * Theft alarm THATCHAM - with interior monitoring in the driver's cabin and cargo area including central locking with additional double locking * Diesel particulate filter (DPF) with SCR catalytic converter and AdBlue tank * Vehicle modem - WLAN hotspot 5G modem (up to 5G/LTE, for up to 10 mobile devices) * Power windows front, electric - with quick-up/down function * Heated windshield * Automatic climate control, 3-zone - with automatic temperature control for driver and passenger side as well as rear, separately adjustable - Auxiliary heater, electric - Electric temperature control in the rear * Charging station, inductive in the center console, for mobile devices - according to Qi standard * Center console, large * Driver fatigue warning * Emergency call assistant eCall * Picnic light * Tire repair kit * Tire pressure monitoring system * Wheels: Alloy wheels 6.5 J x 17 in Active Design * Windshield wipers with rain sensor * Sliding door, with power assist * Rail-based flexible seating system * Seat package 29: Passenger single seat, 4-way manually adjustable - Driver seat, 5-way electrically adjustable - Seat heating for driver and passenger - Armrests, inside and outside - Lumbar support for driver, electric - Lumbar support for passenger - Side airbags, left and right - Head-shoulder airbags, front left and right - Partial artificial leather upholstery Active, seat center in fabric, upholstery in artificial leather-velour Black Onyx * Start-stop system * Socket Nwedpfx Ao Af Dq Eoaten

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, Submitting a bid obligates the bidder to collect the item by December 1, 2026. No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Information Manufacturer: TRUMPF Model: TruLaser 7040 (L62) Year of Manufacture: 2012 Operating Hours: need to be updated Working Area Working area X/Y/Z: 4,000 × 2,500 × 115 mm Speed: max. 304 m/min Accuracy: ±0.1 mm Laser Laser power: 2 × 4 kW Laser heads: 2 units Condition of laser heads: functional Cutting Capacities Sheet metal thickness steel: max. 20 mm Sheet metal thickness stainless steel: max. 15 mm Sheet metal thickness aluminum: max. 10 mm Nodpfx As Aayn Noatswn Control System Control system: Siemens Sinumerik 840 D SL Machine Dimensions and Weight Length: 15,800 mm Width: 7,280 mm Height: 3,090 mm Weight: 16,500 kg Environmental Conditions Ambient temperature: max. 43 °C EQUIPMENT Thin sheet metal productivity package for high-speed, standard, and compressed air cutting 2 lens cutting heads with 130 mm focal length Compressed air cutting BrightLine CoolLine with 2 separate lens cutting heads 4 clamping jaws, 2 per pallet Wide transverse conveyor belt “Wavebelt” with tilting container Tilting container to the left of the machine More powerful compact dust extractor Connection piece for the exhaust duct of the compact dust extractor MDE interface

Condition: used, Year of construction: 2004, Used machine with separate base frame for Vacomat S/N and discharge screw Year of manufacture: 2004 Features and Technical Specifications SCHUKO VacoVent 750 fan unit - Clean air exhaust fan for SCHUKO Vacomat filter systems - Motor power: 7.5 kW - Nominal airflow: 5,089 m³/h - Associated negative pressure: 3,720 Pa - Sound pressure level: 72 dB(A) - Compact, separate fan unit for integration into a compatible extraction system Separate base unit for Vacomat S/N - Equipped with a motor-driven discharge screw - Mechanical discharge of collected dust and chip material for further conveyance - Gear motor power: 0.55 kW - Operating voltage: 400 V - Current consumption: 1.55 A - Frequency: 50 Hz - Screw drive speed: 11 rpm Nwsdpfxj Af I Imo Aatjn - 3-phase alternating current - Year of manufacture according to nameplate: Manufactured in Germany Shipping dimensions: - Fan unit: 1,230 × 840 × 905 mm - Base frame: 1,400 × 1,280 × 1,100 mm - Base frame weight: 268.5 kg

Condition: ready for operation (used), Siemens 6FC4100-1AA00-Z central unit, serial number T311B095-95, professionally overhauled and tested, with a 24-month warranty. 100% functional. Scope of delivery as shown in the photos. The agreed-upon sales discounts do not apply to this item. Please request the price separately! Nwsdpfx Aei Edxcsatsn

Condition: ready for operation (used), Siemens 6FC5203-0AB10-0AA1 flat operator panel SN ST-MO2016199, professionally fully checked and tested, good condition, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this article. Please ask for price separately! Nodpfx Aaspnppbjtown

Condition: ready for operation (used), Siemens 6FC5203-0AB10-0AA1, serial number ST-LN2004535, has been professionally and completely overhauled and tested, and comes with a 24-month warranty. It is 100% functional. The scope of delivery is as shown in the photos. The agreed sales discounts do not apply to this item. Please inquire about the price separately! Nwodpji Edywefx Aaton

Condition: new, INA K811/600-M axial roller bearing, serial number A640, outer dimension 70.5 cm, inner dimension 60.5 cm, unused, in opened original packaging, 100% functional. Scope of supply as shown in the photos. NOTE: Please request a separate quote for packaging and shipping costs! Nwodpsi Ea Unsfx Aaten

Condition: new, GMN TSE 240 cg - SP: 3000-3600-4000-5000 RPM / 37 grinding spindle, shaft diameter: 130mm, front overhang at the thread: 102mm, including test report and installation instructions, new condition: €25,000, unused, 100% functional, scope of supply as shown in the photos. ATTENTION: Please request the costs for packaging and shipping separately! Njdpfsi D U Trjx Aatewn

Condition: new, GMN TSSV 170 s - 12000 / 18 A high-speed spindle, serial no. 287832, unused, in original packaging, 100% functional. Scope of delivery as shown in the photos. ATTENTION: Please request a separate quote for packaging and shipping costs! Njdsi Eacajpfx Aatewn

Condition: new, Siemens 4BU5695-0CC02-0C control transformer, housed in a wheeled cabinet, unused, 100% functional, new price €8,000 net! – Please request shipping costs separately! Nwjdpfoi Edbrsx Aaton

Condition: ready for operation (used), Siemens 6ES5902-3SA12 central processing unit, professionally and completely refurbished and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. The agreed-upon sales discounts do not apply to this item. Please request the price separately! Nedpfxji Edq Ij Aatewn

Condition: ready for operation (used), Siemens 1FK7100-5AF71-1TG0 synchronous servo motor SN:YFT633774409001, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this article. Please ask for price separately! Nodpfx Aotkhv Doatewn

Condition: ready for operation (used), Siemens 1FT5046-1AF71-3AB0 AC-VSA motor SN:YFN616326402001, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this article. Please ask for price separately! Nedpov H H Dksfx Aatown

Condition: ready for operation (used), Siemens 1FT5062-0AG01-2 – Z-axis servo motor, Z = see nameplate, serial number: NEF185298302001. Professionally overhauled and tested, complete with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. The agreed sales discounts do not apply to this item. Please request the price separately! Nwsdpfxei D R N Do Aaten

Condition: ready for operation (used), Siemens 1FT5106-0AC01-2 AC variable-speed drive motor, serial number: E9J10906345003. The motor was completely overhauled by Siemens and then stored for a long period. Used, with normal signs of wear. 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request the costs for packaging and shipping separately! Nedpfxsi D Tb Ao Aatewn

Condition: ready for operation (used), Siemens 1FT6034-4AK71-4EH3 synchronous servomotor, serial number: AAAN850859Z0000, professionally overhauled and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. The agreed-upon sales discounts do not apply to this item. Please inquire about the price separately! Nodpei D Tfqsfx Aatjwn

Condition: ready for operation (used), Siemens 1FT6061-6AF72-4AA0 servo motor, serial number as shown in the photo, professionally and completely refurbished and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. The agreed sales discounts do not apply to this item. Please inquire separately about the price. Njdpfx Asi D Tibjatewn

Condition: ready for operation (used), Siemens 1FT6064-6AC71-4AK0 - Z synchronous servo motor SN:EJ392601301001, Z= see nameplate, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, The agreed sales discounts do not apply to this article. Please ask for price separately! Nwsdpferiqgqex Aaten