Used Squeegee Grinder for sale (1,451)

Year of construction: 1995, condition: ready for operation (used), A Höfler gear grinding machine is offered. Module range: 2-25, max. gear diameter: 1500mm, max. gear width: 720mm, min./max. generating grinding stroke: 60mm/750mm, ram stroke rate: 20-200double strokes/min, number of teeth: freely selectable, max. generating speed: 900mm/min, table diameter: 1000mm, distance between centers: 1250mm, min./max. grinding wheel diameter: 300mm/400mm, grinding wheel bore: 127mm, grinding wheel width: 45mm, weight: approx. 34t. Including paper band filter, counter support with steady rest and balancing unit. Documentation available. Inspection possible by prior arrangement. Iodpfx Aezrn Nnop Djtn

Condition: good (used), Laska W130 meat grinder direct from closed UK meat factory. 130mm grinding head. All stainless steel. Itsdpjyzbkajfx Ap Den

Condition: used, Year of construction: 2021, Manufacturer: Kolbe Model: MW52-120 Year: 2021 Condition: Used Serial Number: 128 0461 Stock Number: 3418 Hole plate diameter: Enterprise, E52, 130mm Capacity max: 2000 kg/h Hopper: 120 litre Power: 3 x 400V, 8.6kW Dimensions: 1550 x 950 x 1500 mm Itsdozqr Sqspfx Ap Don Weight: 560 kg With single mixer in the hopper and safety cover over head

Condition: used, Model: CW Serial No: 26520 Capacities: Maximum Swing Over Bed: 430mm Maximum Distance Between Centres: 2500mm Wheel Dimensions: 660x 75mm Work Head Speeds: (3) 20 – 160rpmrpm Itedpfoyx Hx Dex Ap Don Wheel Head Speeds: 735rpm Table Swivels: Electrics: 415v, 3ph, 50 Cycles Motors Wheel Head: 20 HP 975rpm Work Head: 3HP 1120rpm Complete With: 2 No 2 Point Open Steadies Complete Tailstock Mounted Wheel Dressing Attachment Coolant Approximate Dimensions: 6,750 x 2000 x 1800mm Approximate Weight: 9,000kg

Condition: excellent (used), functionality: fully functional, Provisur Weiler 878 grinder, 50hp model. Greta machine for burger, sausage, Petfood manufacturer. Can mince fresh or frozen flaked meat. Extended hopper. Itjdpfx Apex Av Ruj Don

Condition: good (used), pneumatic angle grinder, Flex, grinding wheel, cut-off grinder, cut-off grinding machine, long-neck rod grinder, pin grinder Ijdpfx Apjx E S Tao Dstn -Manufacturer: Swepro, pneumatic long-neck rod grinder -Type: SW 7433M -Speed: 14600 rpm -Hole: Ø 6 mm -Dimensions: Ø 48 x 400 mm -Weight: 1.7 kg -

Condition: new, Year of construction: 2026, CORMAK TS-125 The CORMAK TS-125 is a precision tool grinder designed for comprehensive sharpening and reconditioning of cutting tools. It enables the machining of drills, cylindrical milling cutters, lathe tools and many other tools. Its solid construction, wide range of adjustments and extensive standard equipment make it a machine designed for intensive use in industrial plants, tool rooms and maintenance workshops. Main Advantages of the Machine Universal application – grinding of twist drills, milling cutters, lathe tools and cylindrical surfaces. Precise adjustment – swiveling grinding head adjustable in two planes: +40°/-40° vertically and +50°/-50° horizontally. Stable construction – a massive base effectively dampening vibrations, ensuring high grinding quality. Drive unit with a 3-jaw chuck (Ø80 mm) – enables machining of cylindrical surfaces and rotary components. Twist drill sharpening range: Ø5–32 mm – ideal for most tools used in industry. Longitudinal travel of 320 mm and cross travel of 170 mm – a large machining range with the machine's compact dimensions. Complete standard equipment – readiness to work with various types of tools without the need for additional purchases. Construction and Technology The CORMAK TS-125 tool grinder has been designed with the highest possible stability and structural rigidity in mind. The worktable with a surface area of 535 × 130 mm and precise guidance ensures smooth movement along both axes. The grinding head, driven by a motor with a power of 0.18 kW and a speed of 2,800 rpm, can be adjusted in two planes, which enables grinding at any angle. Thanks to the use of holders and arbors with different diameters, it is possible to precisely mount various types of tools. Precision and Work Efficiency The machine provides high repeatability and sharpening precision even during serial production and intensive use. The appropriate geometry of the guideways, the quality of the components and the set of grinding wheels (including ring and diamond grinding wheels) enable the achievement of cutting-edge surfaces with a high-quality finish. A milling cutter grinder and drill sharpener in a single machine body is a solution that eliminates the need to invest in multiple separate machines. Isdpfsvugynsx Ap Djtn Standard Equipment Stable base with a tool cabinet 2 tailstocks for positioning the workpieces Table travel stops – precise control of the travel range 2 standard 60° centers and 2 half-centers, 60° 3 grinding wheels: ring grinding wheel 125 × 45 × 32 mm, diamond grinding wheel 125 × 32 × 32 mm, conventional grinding wheel 125 × 25 × 32 mm Grinding disc Drive unit with a 3-jaw chuck (Ø80 mm) Twist drill sharpening attachment Lathe tool holder Arbors for mounting milling cutters: Ø16, Ø22, Ø32 mm Diamond sharpening stone Complete set of operating tools Technical Specifications Maximum workpiece diameter — 175 mm Distance between centers — 320 mm Table size — 535 × 130 mm Longitudinal table travel — 320 mm Cross table travel — 170 mm Grinding head – vertical inclination — -40° to +40° Grinding head – horizontal inclination — -50° to +50° Grinding head speed — 2,800 rpm Motor power — 0.18 kW Weight — 266 kg

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK DG32MD is a professional spiral drill sharpener designed for intensive operation in industrial and workshop environments. The machine enables precise sharpening of HSS and cobalt drills in the diameter range of ø5–ø32 mm, making it a highly versatile tool for production plants, tool rooms, and service facilities. Thanks to the use of a powerful motor, CBN grinding wheels, and an additional drill web thinning socket, the DG32MD model ensures not only high accuracy but also complete regeneration capability for cutting tools. Main advantages of the machine Wide drill diameter range: from ø5 to ø32 mm – ideal for sharpening both small and large cutting tools. Adjustable point angle: 90°–135°, allowing sharpening of most types of twist drills. Two clamping systems (ER20 and ER40): provide secure and rigid drill mounting across the entire diameter range. CBN (borazon) grinding wheels included: designed for sharpening high-speed steel drills, offering high durability and precision. Stable and compact construction: with a weight of 32 kg, it ensures accuracy and vibration-free operation. Complete equipment set: includes collets, holders, and tools – ready for operation without the need for additional purchases. Design and technology The CORMAK DG32MD has been designed for intensive use and long service life. The machine features a robust housing resistant to vibrations and a 250 W motor with a speed of 4400 rpm, ensuring smooth operation even when sharpening larger diameter drills. The quick-change ER20 and ER40 holder system allows easy switching between different diameter ranges, while the precise tool guidance eliminates the risk of operator errors. Itedsvu Ac Eepfx Ap Dsn Precision and work efficiency High-quality components ensure that the CORMAK DG32MD drill sharpener provides repeatable and precise sharpening results, even during continuous production work. Applications The CORMAK DG32MD model is suitable for: tool rooms and production plants where fast drill regeneration is required, repair workshops and maintenance departments, service centres, technical and training facilities requiring high sharpening accuracy and repeatability. Standard equipment 2 × CBN grinding wheels – for high-speed steel drills 12 × ER20 collets: ø5–ø14 mm 18 × ER40 collets: ø15–ø32 mm 1 × ER20 clamping holder 1 × ER40 clamping holder Technical specifications Parameter Value Drill diameter range ø5–32 mm Point angle 90°–135° Power 250 W / 230 V Motor speed 4400 rpm Weight approx. 32 kg Dimensions 400 × 260 × 300 mm

Condition: used, Year of construction: 2002, operating hours: 500 h, functionality: fully functional, max. grinding diameter 238 - 620 mm grinding length 190 mm workpiece length 380 - 940 mm spindle turning speed - stepless 2 - 12000 U/min current capacity 380 kVA power capacity - grinding motor 1,1 kW total power requirement 2,2 kW weight of the machine ca. 0,6 t !!! We have almost all spare parts for the Deckel S 11 machines in stock !!! !!! Accessories can be varied as desired !!! We would be happy to trade in your used Deckel S 11 - contact us! 2189 400 V, 50 Hz, with CEE plug and cable Colour: body pastel turquoise RAL 6034 Stand blue-grey RAL 7031 Motorized height adjustment, axial grinding spindle adjustment Machine like new !! * Accesories: * Sk ??40 dividing head with 24 R dividing disc * Graduated disc 20 R * Tightening screw M 16 69871 * Spiral and relief grinding device with rack housing * Counter bearing with 4 tailstock centres * Center point with driver * Dressing device * Dressing diamond * Radius grinding device SK 40 complete with setting gauge * Steel holder for ditto * Support fingers with sliding blades * Support finger holder * Complete dust extraction without suction * Halogen light * Tooth support complete * Setting gauge * Plier sleeve and jacking nut and wrench * 35 collets 1.0 - 18.0 mm increasing by 0.5 mm * 1 set of SK 40 direct collets 6, 8, 10, 12, 14, 16, 18, 2, 22, 25 mm * 6 jaw grinding chuck * 3 taper reducing sleeves Sk 40 x Mk 1, 2, 3, 4 * clamping nut * 20 grinding wheel chucks * 2 protective hoods * various diamond/borazon discs * Instruction Manual & Keys, Parts List, Wiring Diagram * Complete set of grinding instructions ##### Machine is partially overhauled and with electrical acceptance report! ##### !! Various measuring optics (new or used) with measuring cross sled available !! Itsdpfx Apow U Eh Io Den

Condition: good (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: FAF19SCULPTOR, grinding spindle motor power: 1,500 W, input current: 4 A, The Schneeberger Sculptor is a Swiss high-precision profile grinding machine, specifically designed for the sharpening and manufacturing of tools. The machine is fully operational and available for testing. It comes with a comprehensive set of accessories and parts. Ijdpjyk S Rnefx Ap Detn

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2450x820x1380 mm Itodpfjvz E Eijx Ap Djn Weight 1500 kg Total power requirement 2,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1700x900x1350 mm Iedpfxevz E Ido Ap Detn Weight 300 kg Total power requirement 1,6 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3120x1100x1600 mm Weight 2000 kg Isdpfx Asvz E N Ijp Djtn Total power requirement 6,4 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4600x1000x1550 mm Weight 2500 kg Total power requirement 8,5 kw Itjdpfxevz E U Do Ap Dsn

Condition: used, Year of construction: 1995, functionality: fully functional, Tool grinding machine Jungner Sweden Built in 1995 Accessories Ijdswdihropfx Ap Detn

Condition: good (used), Screed, vibrating screed, concrete trowel -electrically powered -Connection: 230 volts -Working width: 1500 mm -Dimensions: 1500/350/H450 mm -Weight: 17 kg Isdpfx Apeb A Swrs Dstn

Condition: used, Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 1.1 kW -Speed: 1400 rpm -Grinding discs: Ø 300 x 40 mm -Operating voltage: 380 volts Ijdpocwl A Isfx Ap Dotn -Dimensions: 690/500/H1260 mm -Weight: 148 kg

Condition: used, Double bench grinder, double grinder, bench grinder, bench grinder -Manufacturer: Rema, double bench grinder type DS 12/200 -Grinding discs: max. Ø 200 x 32 x 51 mm -Motor power: 0.9 kW -Speed: 2900 rpm -Operating voltage: 220/380 volts -Dimensions: 430/420/H1130 mm -Weight: 80 kg Iedepix Nvjpfx Ap Detn

Condition: new, functionality: fully functional, NEW Perfect DT Series of machines with the touch screen display and easy to use interface. Automatic NC controlled downfeed operation with spark out. Plunge grinding, criss-cross grinding and surface grinding. 300 x 600mm grinding capacity 500mm spindle centre to table 355 x 38 x 127mm grinding wheel Fine pole mag chuck + demagnetiser Coolant system with paper filter and magnetic seperator NC Auto downfeed control system LCD touch screen control panel with easy to use graphical interface Criss-cross grinding function Auto criss stroke adjustment via the touch screen control Ballscrew and microfeed for the cross feed Stepless variable hydraulic system Quantitive lubrication system Back water splash shield Isdpfx Ajnzh T Njp Djtn

Condition: new, Perfectly built to optimise grinding and accuracy efficiency. Auto cross with hydraulic longitudinal. Manual vertical axis. Table longitudinal travel by sensor and solenoid valve - continuous lubrication. Specification Perfect D4080AH Saddle type surface grinder Table size 400 x 800mm Max. Grinding surface 400 x 800mm Max. distance centre of spindle to table 500mm (Option: 650mm) Table speed 5 ~ 25m/min Table guideway V & Flat way Auto. Cross feed increment approx. 0.5mm ~ 20mm Rapid power cross feed approx. 1100mm/min (60Hz) 900mm/min (50Hz) Cross feed on hand wheel 1 rev 5mm 1 gra 0.02mm Rapid power head elevation 550mm/min (60Hz) 450mm/min (50Hz) Vertical feed with MPG 1 rev 2mm 1 gra 0.01mm Auto down feed (Option) 0.001mm ~ 0.999mm/time Wheel speed 60Hz/50Hz 1750rpm (60Hz) 1450rpm (50Hz) Wheel dimensions 406 x 50 x 127mm Spindle motor 5HP Hydraulic pump motor 2HP Auto. Cross feed motor 1/5HP Itsdpfx Apjnzh Uij Den Standard Equipment Grinding wheel and wheel flange Flange extractor Wheel balancing arbor and base Wheel dresser with diamond Levelling screws and plates Tool box and tools Working light Manual AD5 Automatic downfeed control Magnetic chuck and demagnetiser Coolant system with paper filter

Condition: used, Double bench grinder, bench grinder, column grinder, column grinder -Speed: 1500 rpm -Max. Grinding wheels: Ø 300 x 40 mm Ijdpsdwqp Iofx Ap Detn -Operating voltage: 380 volts -Dimensions: 805/550/H1070 mm -Weight: 236 kg

Condition: used, Double bench grinder, bench grinder, column grinder, column grinder, drill bench grinder -grinding wheel: max. Ø 180 x 60 mm -Speed: 2980 rpm -Motor power: approx. 0.9 kW -Operating voltage: 380 volts -Dimensions: 520/400/H1420 mm -Weight: 140 kg Itsdpfxsdwqp Rs Ap Den

Condition: excellent (used), Year of construction: 1997, power: 1.5 kW (2.04 HP), Tria plastic grinder, shredder, granulator for sale in excellent condition make: TRIA 20-15/BL-T Isdpora N A Nefx Ap Detn Power: 1.5kW, 50Hz, 380V Year of manufacture: 1997 Inlet opening: 200 x 230mm rotating knives 3 pcs standing knife: 1 pc Spout opening: 60mm Final product size: 3-5mm Capacity: 30 kg/h approx.

Condition: excellent (used), functionality: fully functional, Reinecker WZS60 Itodpfx Apszwplbs Den Year of manufacture: 2007 Glass changing machine Part loader

Condition: used, Year of construction: 1996, CNC TOOL AND CUTTER GRINDER Manufacturer: Alfred H. Schütte, Cologne, Germany Model: WU 405 Year of manufacture: 1996 Serial number: Series 12, No. 09 Machine type: Five-axis CNC universal tool and cutter grinder CNC control: NUM Drive system: Siemens SIMODRIVE 611 Axis travel: - X axis: 540 mm - Y axis: 280 mm - Z axis: 260 mm - A/W rotary axis: approximately 355° - C-axis grinding-head rotation: 330° - Manual grinding-head inclination: ±25° Working range: - Centre height: approximately 200 mm - Maximum clamping length between centres: approximately 700 mm - Maximum number of divisions: 999 - Programmable lead range: approximately 0.5–10,000 mm Feed ranges: - X axis: 0.1–10,000 mm/min - Y axis: 0.1–10,000 mm/min - Z axis: 0.1–5,000 mm/min Grinding spindle: - Double-ended grinding spindle - Spindle-speed range: approximately 1,800–12,000 rpm - Maximum spindle speed: 12,000 rpm - Frequency-controlled spindle motor Electrical data: - Rated operating voltage: 400 V - Power supply: three-phase - Frequency: 50 Hz - Rated current: 18 A - Electrical drawing number: PE-WU400-1209 - CE marked Approximate machine data: - Machine weight: approximately 3,150 kg - Fully enclosed grinding area - Five CNC-controlled axes Itodpfxjzxhqrj Ap Dsn - Suitable for manufacturing and resharpening cutting tools - Designed for grinding medium and large workpieces and for grinding between centres