Used Stalh Folder for sale (686)

Condition: ready for operation (used), Size with flatpile feeder max 660 x 1040 mm Speed max 210 m/min Equipment feeder • flat pile feeder • Tremat 1st folding unit • 4 buckle plates • noise prevention Blodpfxed Iq S Uo Af Hok 2nd folding unit • 4 buckle plates • noise prevention delivery • delivery SBP 46

Year of construction: 2002, condition: used, Size max 1.120 x 1.450 mm min 250 x 250 mm Speed max 10-16 m/min Bedpfxeddh Evo Af Hjlk Equipment: feeder • pallet feeder (MBO) • MC control 1st folding unit: • 4 buckle plates • rear-mounted slitter shafts • noise prevention 2nd folding unit: • 4 buckle plates • rear-mounted slitter shafts • noise prevention 3rd folding unit: • 2 buckle plates • rear-mounted slitter shafts • noise prevention delivery: • belt delivery

Condition: ready for operation (used), Size max 560 x 920 mm min 150 x 180 mm Speed max 180 m/min Equipment feeder: • continuous feeder • MS control • counter 1st folding unit: • 4 buckle plates Blsdod A Hcvspfx Af Hok • noise prevention delivery: • belt delivery

Year of construction: 2002, condition: ready for operation (used), Built in 2002 Size with continuous feeder max 660 x 1.280 mm Size cross fold min 150 x 200 mm Size threefold min 200 x 300 mm Speed max 180 m/min Length with continuous feeder 5.890 mm Width 2.340 mm Bleded E Nbqspfx Af Hek Equipment: feeder: • continuous feeder • counter 1st folding unit: • 4 buckle plates • noise prevention 2nd folding unit: • cross-fold knife • noise prevention 3rd folding unit: • third-fold knife • Lärmschutzeinrichtung peripheral units and deliveries • stream delivery with pressing station -- optionales Equipment:--not included— • gate fold buckle plate

Condition: new, Year of construction: 2026, High quality of execution and the attention to detail of all elements ensure reliable and long-term use of this modern folding machine. The application possibilities have been expanded even further by using the foot pedal. You can therefore bend at any tool position and you do not have to constantly use the clamping lever on the right end of the machine. This increases both accuracy and speed when positioning the workpiece on the bending edge. With this foot swivel bending machine you can bend the sheet from three sides. In the machine construction there is a space of 6 cm up and down for curved processing. Folding bench RED PLUS 2200 / 0.8 incl. foot control and transport wheels Technical specifications: - maximum working width: 2200 mm - Bending performance: up to 0.8 mm (sheet steel) - All non-ferrous metals 30% more bending power - Bending angle: max. 145 degrees - the cut with the roller shears across the entire working width - Bending beam thickness: 15 mm - lifting the top beam in three positions - Upper cheek stroke: 80 mm Degree scale Angle stop up to 90 degrees rear frame for holding the sheet front depth stops Bjdpfoc Nxwhox Af Hjlk - Weight: approx. 230 kg The roller shear (max. Cutting capacity 0.8 mm / steel) + 350 euros The machine complies with the CE guidelines and has a 12-month guarantee. Delivery time: 2-4 days We are looking forward to your contact!

Condition: new, Year of construction: 2025, Folding bench bending machine with cutouts in cheeks, with the possibility to finish bending window sills on three sides. Cutouts from 6 cm up and 6 cm down. This modern press brake has a lot of space inside and a narrow 15 mm bending beam. The offered bending machine Red 2700 / 1.0 is an alternative to the segment bending machine for less complex work. We get this possibility thanks to the construction with special cutouts. This machine performs bending operations from the top up and down. The strengths of this bending machine include high performance while maintaining the precision and repeatability of the machining. Intended for processing steel, aluminum and other sheet metal. This folding bench is extremely functional. RED 2700 / 1.0mm Technical specifications: - maximum working width: 2580 mm - Bending performance: up to 1.0 mm (sheet steel) - All non-ferrous metals 30% more bending power - Bending angle: max. 160 degrees - The cut with the roller shears across the entire working width - Bending beam thickness: 15 mm - lifting the top beam in three positions - Upper cheek stroke: 80 mm Degree scale Angle stop up to 90 degrees rear frame for holding the sheet front depth stops - Weight: approx. 490 kg Bljdpfx Afob H Ac Ie Hek The roller shears (max. Cutting capacity 0.8 mm / steel) + 350 Euro The machine complies with the CE guidelines and has a 12-month guarantee. Delivery time: 2-4 days We issue the invoices with 0% (intra-community delivery) We are looking forward to your contact!

Condition: new, Year of construction: 2025, Sheet metal folder RED PLUS 2200/0.8 incl. foot flapping Bsdpfecb H Exex Af Helk By applying the hinges and the foot opening the capabilities have been enhanced. And the machine lets for even more accurate work. Technical details: max. working length: 2200 mm bending capacity: 0,8 mm (steel) 1,2 mm (aluminum, zinc and copper) bending angle: max. 140 degrees thickness of bending bar: 15 mm passage: 130 mm Foot flapping to open and close the bending bar Price: 2600 Euro Shipping costs: its dependent on destination point, please ask us, we check Your total shipping costs. Our folding machine RED Plus has to open and close the upper bar a foot flapping. It cans therefore turn to each tool position and you do not ever engage the clamping lever on the right site of the machine. This increases both the accuracy and speed, as well as during positioning of the workpiece at the bending edge. Angle stop for constant bending angle  Weight: 270 kg Dimensions L x W x H: 2450 x 900 x 1100 mm Warrenty 12 months Certificate CE  

Condition: new, Year of construction: 2026, Are you looking for a machine for sheet metal processing? Do you expect quality and reliability? Professional advice as well as accurate and punctual deliveries will be provided by Prod-Masz. ZGR-2140/1.5mm (2mm Alu) the maximum working length 2140 mm Bjdpfsc Ikrqjx Af Helk the thickness of the steel sheet up to 1.5 mm non-ferrous metals 30% higher bending performance bending angle: 145 degrees (on request up to 165 degrees) cut throughout the working length a table for supporting the rear plate gas springs beam curving 20 mm weight approx 350 kg hand-held machine raising the upper beam into three positions maximum ground clearance of 100 mm between the beams

Condition: new, Year of construction: 2025, Technical data: Bledpoc N Af Djfx Af Hjk - Maximum working width: 3140 mm - Sheet gauge up to: 1,0 mm (Steel) - Titan-Zinc-Plate 1,0 mm, Aluminium Plate 1,8 mm Cooper plate 1,5 mm - Max. bending angle: 145 degrees - Rotary shears cut to full working length - Thickness of bending bar: 20 mm - Protractor - Weight: 600 kg - The machine have certificate CE and 12 months warranty.

Condition: new, Year of construction: 2026, ZGH-type machines are a versatile solution for sheet metal processing. They are universally applicable for demanding workshop applications. To create this versatile solution for all applications up to 1.2 mm steel sheet, PPHU Prod Masz drew on its many years of experience in mechanical engineering. The ZGH machines offer the optimum in precision, durability, and stability. Bodjc I Tn Hjpfx Af Hjlk This model is equipped with a control panel. Maximum working length: 3140 mm Maximum sheet thickness: 1.2 mm (steel) Weight of the manual machine: approximately 2100 kilograms Upper beam lifting in three stages Bending die: 30 mm Maximum clear distance between the beams: 100 mm Bending angle: 150 degrees Delivery to Germany: 750 euros Delivery time: up to 2 weeks Optional: roller shear at an additional cost Optional: rear stops with scale at an additional cost We look forward to hearing from you!

Condition: new, Year of construction: 2025, Manual segment bending machine 2 meter working width The SGR model is equipped with segmented bending tools on the three beam elements: upper, lower and bending beam. Sheet metal can be bent on all sides and, for example, complex box shapes or workpieces with bending legs up and down can be produced. Multi-use, powerful, heavy and very solid segment folding bench - this is not a typical folding bench - much stronger and more robust. A segment folding machine is characterized by full segmentation over the entire working length of 2 meters. Upper and lower segments can be removed easily and quickly and the bending beam is divided into segments. The bending angle is from 0 to 160 degrees. Lock with the pedal, your hands are free and you can easily position the sheet metal - open and close with your foot. The bending beam is connected to 2 gas pressure dampers, so controlling the bending beam is incredibly easy. At the rear of the machine 2 practical tool boxes for segments or tools. Technical specifications: Bljdjhunv Iepfx Af Hjk - maximum working width; 2050mm - Bending angle max. 160 degrees - max. sheet thickness (steel) 1.2mm - Weight 600kg - segment jaw width 30,40,50,60,70 and 100mm - three cheeks are equipped with segment jaws (full segmentation) -Stop for preset bending angles -degree scale passage 100mm castors incl. Delivery date: every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT (polish invoice).

Condition: new, Year of construction: 2025, working width: 1,250 mm, bending angle (max.): 160 °, sheet thickness steel (max.): 1 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness copper (max.): 12 mm, overall weight: 100 kg, total length: 1,500 mm, Timely delivery, trustworthy equipment ! Manual bending machine folding bench sheet metal bending machine with segments Prod Masz is a guarantee of reliability. Triple segmented bender SGR-1250/1.0mm Technical specifications: - maximum working width; 1250mm - Bending angle max. 160 degrees - Bending beam 15mm - max. sheet thickness (steel) 1.0mm, aluminum 1.2mm - Weight 105kg - segment jaw width 30,40,50,60,70 and 100mm - three cheeks are equipped with segment jaws (full segmentation) -degree scale - passage 55mm Total length: 1.6m Height: 45cm Price: 2,950 euros Delivery date: every week We are looking forward to your contact! Bljdpfocgmf Rsx Af Hok Invoices are issued with 0% as intra-community delivery or with plus 19% of VAT.

Condition: new, Year of construction: 2025, Sheet metal folder ZGR-3140/1.0 We have a new, high-quality folding machine of 3140 mm/ 1.0mm. This machine guarantees very high quality and agility of the work doing by the roofers. Our main task is the production of folding machines, with which we are concerned many years. The bending machine is equipped in degree scale, Romans screws, rear frame and gas struts. Bjdsci R Exjpfx Af Hjlk Directly from manufacturer! - max. working length 3140 mm - steel plate to 1.0 mm - our machines bend both a copper sheet and aluminum sheet - the total weight of machine is 600 kg - the clearance between the lower beam (fixed) and the upper beam (pressed) of 80 mm - bending angle of 145 degrees - thickness of the bending beam of 20mm - new, full machine - delivery to the client - certificate CE - TAPPING ANGLE IS FREE !! Price excl. shipping We provide invoices with 0% of tax. Delivery every week :)

Condition: new, Year of construction: 2025, Sheet metal folder directly from polish manufacturer Prod-Masz. Bledec Nxwyepfx Af Hok Plate Bending Machine ZGR-1400/1.2mm Technical data: - Maximum working width: 1400 mm - Sheet gauge up to: 1.2 mm (Steel) - Max. bending angle: 145 degrees - Rotary shears cut to full working length - Thickness of bending bar: 15 mm - Protractor - Weight: 150 kg - Rotary shears (max. plate gauge 0,8 mm / Steel) - The machine have certificate CE and 12 months warranty. Shipping costs: its dependent on destination point ONLY SHIPPING IS POSSIBLE Price: 1050 Euro ( VAT excl. ) Contact with what's app We provide invoices with 0% of tax.

Condition: new, Year of construction: 2026, More time saved! More convenience! The RED-3200/1.0/155* electric swing bending machine is ideal for thin sheet metal processing up to 1.00 mm steel sheet, recurring one-off productions, and small-batch manufacturing. The upper beam and bending beam are motorized. The RED-3200/1.0/150* motorized swing bending machine has a working length of 3200 mm and bends steel sheets up to a maximum thickness of 1.00 mm. Prod-Masz's electric sheet metal bending machines now feature an electric pressure lifting device. This is a fully electric sheet metal bending machine. ✔️ Maximum working length: 3200 mm ✔️ Bending capacity: up to 1.0 mm (steel sheet) ✔️ Titanium-zinc sheet: 1.0 mm, aluminum sheet: 1.2 mm, copper sheet: 1.2 mm ✔️ Bending angle of the bending machine: max. 150 degrees ✔️ Bending jaw thickness: 18 mm ✔️ Cutting with the roller shear across the entire working width ✔️ Lifting of the upper beam in three positions ✔️ Upper jaw stroke: 80 mm ✨ Seize this unique opportunity and upgrade your workshop with the best press brake on the market! Trust the manufacturer that has been an industry leader in metalworking for years. -> Rotary shear (max. cutting capacity 1.2 mm / steel) plus €500 -> crusher/ welt press plus €75 Delivery costs: € please ask Additional equipment: - Rotating finger guide 65cm plus €1250 - Measuring gauge 36cm (2 pcs.) €75 - Measuring gauge 65cm (2 pcs.) €150 Delivery date: every Monday/Tuesday Cash on delivery or prepayment We look forward to hearing from you! - We issue invoices Bsdocri E Nspfx Af Holk

Condition: new, Year of construction: 2025, Timely delivery, trustworthy equipment ! Manual bending machine folding bench sheet metal bending machine with segments Prod Masz is a guarantee of reliability. Click and check our online offer Triple segmented bender SGR-650/1.0mm Technical specifications: - maximum working width; 650mm - Bending angle max. 160 degrees - Bending beam 15mm - max. sheet thickness (steel) 1.0mm, aluminum 1.2mm - Weight 60kg - segment jaw width 30,40,50,60,70 and 100mm - three cheeks are equipped with segment jaws (full segmentation) -degree scale - passage 50mm Total length: 1m Height: 45cm Price: 1,900 euros Delivery date: every week Delivery costs are PLEASE ASK We are looking forward to your contact! Bsdpfoh H Dk Rex Af Hjlk Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT.

Condition: new, Year of construction: 2025, The highest precision of this press brake guarantees and enables the bending of sheet steel up to 0.8mm and for all non-ferrous metals 30% more bending capacity. The Prod-Masz press brakes are characterized by high quality, robustness, optimal functionality and beautiful design! Only high-quality materials are used in the production of the folding bench. Folding machine 3.14m/0.8mm Technical specifications: - maximum working width: 3140 mm - Bending performance: up to 0.8 mm (steel sheet) - Bending angle: max 145 degrees - Bending beam thickness: 24 mm - the cut with the roller shears over the entire working width - lifting of the upper beam in three positions - Passage opening: 80 mm - degree scale - angle stop - Front and depth stops - Weight: about 400 kg Bsdpfxsb Hqa Nj Af Hslk - The cutter (max. cutting capacity up to 0.8 mm / sheet steel) plus 350 euros - The machine complies with CE guidelines and has a 12-month guarantee. Price: €2050.00 The delivery costs are: PLEASE ASK Cash on delivery and bank transfer in advance Delivery within 1 week from order date We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT.

Condition: new, Year of construction: 2025, Bending machine with segments 1000/1.5mm This model SGR-1000mm is characterized by the removed upper and lower segments and also the bending beam is divided into segments. In addition, treadle is mounted to the opening of the upper bending beam. - Segments of an upper and lower clamping arm extends the application range, - Blockade by means of a pedal, the hands are free and you can freely position a sheet, - Folding machine for universal use in repair, - and body shops, - Compact design, modern shaped, - Manual folding machine for standard tasks, - Segments of an upper clamp enhance the bending ability Bsdpfjcvbu Asx Af Hslk Technical specifications: - Max. Working width; 1000 mm - Bending angle max. 160 degrees - Max. Sheet thickness (steel) 1.5mm - Weight 235 kg - segmentback width 30,40,50,60,70 and 100 mm Price excl. shipping We provide invoices with 0% of tax Delivery in one week from the order date

Condition: excellent (used), Hydraulic folding machine by Schröder Group, model SCHRODER-FASTI 215-40-4 A proven, robust industrial machine for precise bending, folding, and profiling of sheet metal. Despite its age, the machine operates flawlessly, delivering precise and clean results. Technical Data Machine type: Folding machine / hydraulic shear & folding machine Manufacturer: SCHRODER-FASTI Model: 215-40-4 Control: FASTI-matik 4000 (CNC) Max. sheet thickness: 4 mm (at 400 N/mm²) Working length / reference dimension: approx. 2,000 mm Stroke of upper beam: 350 mm Motorized adjustment of bending beam: 80 mm Motorized adjustment of lower beam: 80 mm Motor power for adjustments: 0.75 kW Features - Motorized adjustment of bending and clamping beams Bodpfx Afeygv S Uo Holk - High clamping pressure speed - Robust, adjustable bending options - FASTI-matik 4000 CNC control - Segmented/finger rails Tools / rails: Flat rail: 18 mm Medium rail: 45° Reinforcing rail: 36 mm Finger size: 150 mm - High repeat accuracy - Fast setup times - Proven FASTI quality "Made in Germany" Condition: Used Technically tested, fully functional, and ready for immediate use Delivery time: immediate Shipping terms: ex works, loaded free of charge Loading: possible by forklift or crane Transport / forwarding: can be arranged

Condition: new, Year of construction: 2025, The ZGR-3500 press brake is built with very high strength, so the press brake is very robust and stable. The folding machine ensures high precision for daily use on the construction site. In addition to all cutting and edging work, we can equip the edging bench in the manual folding machine. Bending machine ZGR-3640/0.65mm Maximum working width of the press brake: 3640 mm Sheet steel: up to 0.65 mm Bending angle: 145 degrees Cutting along the entire working length Raise the upper cheek in three layers. Maximum clear width between the cheeks: 80 mm Rear rack for holding sheet metal Gas springs for lifting the cheeks Weight of the press brake: 550 kg Shipping PLEASE ASK Roller scissors plus 350 euros Manual folding machine plus 75 euros Bedpfx Afohqxk Eo Hjlk Delivery within 4 days from order date We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT.

Condition: new, Year of construction: 2025, maximum working length 1400 mm Blodpfx Afsb Hdz As Hok sheet gauge up to 2 mm approx. weight of the hand machine 190 kg shear cutting on the whole working length upper bar lifting in three positions maximum clearance between bars 80 mm

Condition: new, Year of construction: 2025, Our qualified and motivated team, based in Poland, manufactures machines for sheet metal processing. Our philosophy is to give our customers the best. A binding, open dialogue that creates trust and security is particularly important to us. ZGR-2140L/0.8 Bending angle: 160 degrees Technical specifications: Blsdpfoc I T Rxex Af Hsk - maximum working width: 2140 mm - Bending performance: up to 0.8 mm (steel sheet) - Titanium zinc sheet 0.8 mm, aluminum sheet 1.2 mm copper sheet 1.25 mm - Bending angle: max 160 degrees - Bending beam thickness: 15 mm - the cut with the roller shears over the entire working width - lifting of the upper beam in three positions - Upper beam stroke: 80 mm - Angle indicator - Weight: about 180 kg - The machine complies with CE guidelines and has a 12-month guarantee. - Roller scissors – max. cutting capacity 0.8 mm (sheet steel) plus 350 euros Price: €1,500.00 Cash on delivery! Delivery: every week We are looking forward to your contact!

Condition: new, Year of construction: 2025, This model SGR-1250 is characterized by removed upper and lower segments and also the bending beam is divided into segments. In addition, a foot lever is installed to open the upper bending beam. - Segments of an upper and lower clamping arm expand the application possibilities, - Blocking with the help of a pedal, the hands are free and you can freely position a sheet, - bending bench for universal use in repair and bodywork workshops, - compactly built, modernly shaped, - manual bench for standard tasks, - Segments of an upper span increase the flexibility, Technical specifications: - Max. Working width; 1250mm Blsdpfsc Swkhjx Af Hek - bending angle max. 160 degrees - Max. Sheet metal thickness (steel) 1.5mm - Weight 255 kg - segment jaws width 30,40,50,60,70 and 100mm - three cheeks are equipped with segment jaws (full segmentation) -Stop for preset bending angles -Gradscala Price: 5400 euros Wheels inkl. We are looking forward to your contact!

Condition: new, Year of construction: 2025, Timely delivery, trustworthy equipment ! Prod-Masz press brakes - your best choice! High-precision folding machine for steel, copper, zinc and aluminum sheets. These press brakes and all common spare parts are available from stock. Folding bench ZGR-2140L/0.8 the maximum working length 2140 mm the max. thickness of the steel sheet for 0.8 mm roller scissors incl. bending beam 15 mm Bending angle 160 degrees the weight of the handheld machine is about 165 kilograms the cut with the scissors on the whole working length lifting the top beam in three layers The maximum clear width between the beams is 80 mm Rotary shears + 350 euros Crushfolder + 75 euros Shipping costs please ask Delivery possible every week We are looking forward to your contact! Bjdpfjb Hd Hiox Af Holk We issue the invoices with 0% (intra-community delivery).

Condition: new, Year of construction: 2025, Bending machine PROD-MASZ to the plate ZGR 2640.-0.8 is a sensational machine for precision bending of all types of metal sheets (steel 0.8mm, titanium zinc 0.8mm, aluminum of 1.2 mm, copper sheet 0.65 mm). Equipped with a rack supporting plate, two front bumpers, bending angle measurement, a single lock of bending angle, turnbuckles, eccentric mechanisms. Each part of the machine is adjustable, which allows for adjustment of the arc bending. Blsdpfec Nwd Ajx Af Hjk Used in the device locking system (set by the operator) allows you to achieve the desired angle of bending. Table rear and front bumpers are made of galvanized racks. Ideal for all kinds of steel treatments - wherever the roof is exposed to moisture infiltration. Proper execution of these connections certainly prolong the life of the roof. By hers construction she can be used not only for bending panels with both the ferrous metal, sheets of plastic and fiberboard.