Used Steckregal Super for sale (1,172)

Condition: ready for operation (used), Year of construction: 2018, operating hours: 550 h, functionality: fully functional, power: 16.92 kW (23.00 HP), fuel type: gasoline, We offer you: Chipper – Garden Chipper Eliet Super Prof Max on wheeled chassis Year of manufacture: 2018 520 operating hours Equipped with a powerful 23 HP Vanguard EFI engine Hydraulic wheel drive Hydraulic feed roller with forward & reverse Up to 13 cm branch diameter Folding discharge chute, swivels 280 degrees Electromagnetic engagement of knives 24 knives distributed over 6 discs Feed opening: 500 x 700 mm Approx. 6.5 m³ of chips per hour Noise level: 116 dB(A) Dedpfx Asy D I I Rjk Aocp Weight: 441 kg The machine is also available for rent.

Condition: used, functionality: fully functional, Year of construction: 2000, machine/vehicle number: 152018, control type: CNC control, degree of automation: automatic, actuation type: electric, laser power: 2,500 W, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 8 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, year of last overhaul: 2026, Equipment: cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, The laser beam output power is 2.5 kW. The machine can cut sheets up to 10 mm thick. Additional equipment includes a sheet loading device and a device for unloading cut parts. The machine is in operation, and its functions and cutting quality can be demonstrated. Dedps Ahxvzofx Ak Aecp The facility where the machine is installed can be rented, allowing production to continue without relocating the laser, which significantly reduces costs. A gas station with a nitrogen tank and oxygen cylinders is located near the facility. The facility covers an area of 1250 m2.

Condition: excellent (used), I am offering for sale a professional Bohm Wiedenmann Super 300 sweeper-collector with a working width of 1.5 m. This machine is designed for collecting cut grass, leaves, branches, thatch after scarification, and other debris from green areas, sports fields, parks, golf courses, and large lawns. The Super 300 model is highly regarded for its robust construction and high performance. Technical data: * Manufacturer: Bohm Wiedenmann GmbH * Model: Super 300 1.5 * Year of manufacture: 1998 * Working width: 1.5 m * Permissible total weight: 1450 kg * Permissible axle load: 1250 kg * Permissible drawbar load: 200 kg * Maximum transport speed: 40 km/h * PTO shaft * Large collection container Dsdpez Sngaefx Ak Aecp * Hydraulic control The machine shows normal signs of wear and tear consistent with its age. It is being sold in the exact condition as shown in the photos.

Condition: excellent (used), CATALOGUE NUMBER 7221 TECHNICAL DATA - min / max width of the workpiece 45 / 150mm - min / max height of the workpiece 15 / 50mm 3 spindles: 1) horizontal lower 11kW 2) horizontal upper 22kW (7000 rpm) 3) horizontal lower 5.5kW spindle diameter 40mm - spindle 1 and 3, manual adjustment up/down, left/right - spindle 2, manual adjustment left/right - spindle 2, electric adjustment up/down - spindles 2 and 3 are equipped with brakes from above: - 3 feed rollers, pulling, metal toothed - 1 double output roller, pulling, rubber Djdpfx Aezxq I Hsk Aocp from below: - feed pressure roller - ribbed table - pulling roller, metal, smooth - electric adjustment of planing thickness - stepless adjustment of feed speed 6-24m/min - feed motor 3kW - feed on Cardan shafts - length of the feed table 1970mm - automatic lubrication system for the table - diameter of the dust extraction outlet 1x150mm, 2x140mm - dimensions L/W/H 3070x2000x1800mm - weight 2000kg ADVANTAGES – German production – with 3 heads – for processing slats – ribbed table – heads included – unpainted – very good condition – used planer Net price: 115900 PLN Net price: 26960 EUR Net price calculated at an exchange rate of 4.30 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: ASS.NO.330165301, turning length: 1,017 mm, turning diameter: 420 mm, total height: 2,840 mm, total length: 5,500 mm, total width: 2,800 mm, overall weight: 7,400 kg, bar passage: 70 mm, number of driven tool stations in tool turret 1: 12, MAZAK SUPER QUICK TURN 300 M CNC lathe Note: Technical data is provided without guarantee. - Swing diameter: approx. 620 mm - Max. turning diameter: approx. 420 mm - Max. turning length: up to approx. 1017 mm - Bar capacity: presumably 70 mm - Diameter of the three-jaw chuck: 250 mm - Number of powered tool stations: 12 - Includes technical documentation - Includes machine accessories such as tool holders, some powered, chuck jaws, and other accessories Dcodpfx Akez Nwaps Asp Transport will be carried out on a standard truck. FCA D-01445 Radebeul - loaded onto truck.

Year of construction: 2017, operating hours: 200 h, condition: used, functionality: fully functional, We are offering this used Marunaka SUPER MECA-S super surfacer / planing machine, year of manufacture 2017. Serial number: 1074 Manufacture date: 02.11.2017 Rated voltage: 380 V Phases: 3 Network frequency: 50 Hz Total power: 2.3 kW Main motor power (continuous): 2.2 kW Main motor speed at 50 Hz: 1,410 rpm Feed speed: 53 m/min Maximum working width: 250 mm Maximum working height: 300 mm Net weight: 430 kg The machine comes with the following optional features: - Increased pass-through height to 300 mm - Pressure roller for wide workpieces - Lateral infeed and outfeed tables - Includes 10 blades at EUR 50 each Dcjdpfoy Hdp Nsx Ak Aep The machine has seen very little use and is in excellent condition. If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: good (used), functionality: fully functional, Super Soco TC Electric Motorbike With increased battery charge time, increased speed and increased range, the TC is a fantastic all-rounder electric motorbike with the looks and practicalities to deliver. Capable of 28mph with a 45 mile range, the Super Soco TC is well suited to become your daily inter city commute. The battery easily removes to be charged at work or at home over a 6 hour period. With no gearing thanks to the electric motor, this automatic "twist and go" bike is extremely easy to ride. A large display gives excellent visibility of speed, range, battery levels and driving mode at a glance without compromising on retro looks. The 3000W Bosch motor gives smooth acceleration up to 28mph in luxurious silence. Keyless, the TC has been designed to protect against theft. Starting the bike is the push of a button. A lightweight frame makes handling not only easy, but extremely good fun. Powerful front LED lights offer illumination for both you and other road uses. Hydraulic double piston brakes give safety and control in all conditions. Good working condition. Please check out our other listings as well Dcsdpfx Akov U El Nj Ajp

Condition: used, Year of construction: 2005, functionality: fully functional, KIATURN 15N SLANT BED CNC LATHE Dodpfx Akez Rnwbj Ascp 170 MM HYD 3 JAW CHUCK MAX TURNING DIA 250 MM BAR CAPACITY 38.1 12 STATION TURRET TAILSTOCK FANUC CONTROL TOOL SETTER PARTS CATCHER BARFEED

Condition: like new (used), Year of construction: 2015, machine/vehicle number: Nr.2012/15, functionality: fully functional, power: 14 kW (19.03 HP), input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, total width: 2,000 mm, total length: 9,085 mm, total height: 2,713 mm, overall weight: 1,400 kg, 1. Technical Specifications Parameter Specification / Value Dcodpfx Akez A D Rte Aep - Manufacturer / Brand Schraml Glastechnik GmbH (LiSEC / LiTROS Group) - Model / Type topCLEAR TC 20 Super-4 - Serial Number 2012/15 - Year of Manufacture 2015 - Direction of Operation From right to left (R → L) - Working / Operating Height 580 mm - Maximum Washing Height 2,000 mm - Glass Thickness 3 – 20 mm - Minimum Glass Dimensions 300 mm x 50 mm - Number of Washing Brushes 4 pieces (2 pairs for double-sided intensive cleaning) - Transport Speed Adjustable, 1 – 5 m/min - Total Weight 1,400 kg - Dimensions: L: 9085 mm H: 2700 mm W: 2000 mm

Condition: excellent (used), two speed with switch belt gear Djdpfx Aoyxcxaek Aocp motor power 0,8kW clamp connection 380V

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 44006 302 01 01, overall weight: 1,400 kg, total length: 1,800 mm, total width: 1,800 mm, total height: 2,000 mm, Profile steel cutting machine Peddinghaus 210 Super 11 Availability: Immediately - by arrangement Can be inspected while powered: Yes Technical data: Voltage: 220/380 V Rated current: 10/6 A Fuse rating: 20/16 A Type of current: 3-phase Dedez Hlhbspfx Ak Aocp Frequency: 50 Hz Motor: 8.3/4.8 A Scope of delivery: Accessories as shown in the pictures Dimensions & weights: Installation dimensions L x W x H approx.: 1800 x 1800 x 2000 mm Weight approx.: 1400 kg If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional notes: ►Upon request, we can offer transport to the destination. ►The quoted price is net, plus VAT. ►The goods are sold with the exclusion of any warranty. ►Technical data subject to change without notice. ►Subject to prior sale. ❗The sale of the goods is exclusively to business customers❗

Condition: used, Year of construction: 2015, Forel High Speed Hot -Melt IGU Line, comprising: Forel VW 2000 6 brush glass washer. Serial no: P15080 (2015) 2000 x 3500 (max) Forel / Soft Solution scanner. Serial no: LSC20150291 (from cabinet) Forel SQD 202. Serial no: P15081 (2015) 2 - Forel TSS 20D automatic spacer applicators. Serial no: P15082 (2015) Serial no: P15083 (2015) with guarding Forel Georgian assembly rack with Sick guard 2 - Forel CT 2000 corner tape applicators. Serial no: P15084 (2015). Serial no: P15085 (2015) Forel AFG 20D gas press / coupling press. Serial no: P15086 (2015) Forel SAHM 20D automatic heat sealing hot melt robot. Serial no: P15087 (2015) Dcjde Afwtgjpfx Ak Aop Location: This lot is located in Wellingborough, Northamptonshire, UK

Condition: used, Year of construction: 2021, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, For sale is a professional, compact roll fermentation cabinet system from Werner & Pfleiderer (WP), model Super-B. The system comes from a working bakery and is the ideal solution for artisan businesses that want to achieve high and consistent roll quality in a compact space. Perfectly suited for the efficient production of sliced rolls, Kaiser rolls, and round rolls. The roll system has a side discharge which can be used for other machines. Advantages & Features: • Compact design: Extremely space-saving and ideal for bakeries with limited space. • Gentle dough processing: Ensures excellent dough piece quality and optimal dough development. • Reliable WP quality: Robust bakery technology designed for daily, heavy-duty use. Dcedpfxszlxc Ej Ak Aep • Versatile: Ideal in combination with a WP Multimatic head machine. Technical Data & Condition: • Manufacturer: Werner & Pfleiderer (WP) • Model: Super-B • Condition: Used, with normal signs of wear and tear commensurate with its age. The machine has operated reliably until recently. • Year of Manufacture: 2021 • Power Connection: 400 V / 50 Hz Sales Conditions & Price: • Price: €30,000.00 net (plus 19% VAT) • Invoice: You will receive a proper invoice with VAT shown. • Warranty: The sale is of a used machine to commercial customers, excluding any warranty, guarantee, or right of return. • Appointment for viewing can be arranged. • Shipping/Collection: Collection and dismantling by the buyer only. Optional: A forklift is available on-site to assist with loading. The information in the advertisement is non-binding and does not constitute guaranteed characteristics. The seller is not liable for typographical, data transmission, or input errors. Subject to changes, errors and prior sale. Only the agreements in the purchase contract are binding.

Condition: reconditioned (used), Year of construction: 2012, Johnford SV-48H “Super Vertical” CNC Vertical Machining Centre Specification: Model: SV-48H Manufactured In June 2012 Heidenhain iTNC 530 CNC Control Maximum spindle speed: 6,000 rpm Machine Weight: 10,000 kg, stated on the plate Electrical supply: Three-phase, 415 V, 50 Hz Full-load current: 76 A Compressed-air pressure: 5–7 bar X-axis travel: 1,220 mm Y-axis travel: 710 mm Z-axis travel: 630 mm Table size: 1,300 × 700 mm Maximum table load: 1,500 kg Spindle nose to table: 100–730 mm Spindle centre to column: 740 mm Dcedpez N H Ensfx Ak Asp Spindle taper: BT50 Spindle motor: 11 kW continuous / 15 kW at 30-minute rating Spindle transmission: High/low gearbox Rapid traverse, X / Y / Z: 24 / 24 / 24 m/min Cutting feed rate: 1–12,000 mm/min Tool magazine: 24 Station Arm type ATC Maximum tool length: 400 mm Maximum tool weight: 15 kg For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #MAN001 Machine Serial Number: VBD12242 Cost: £24,950+ VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2015, Parts shown by hand not come. Upper turret have problems. Dont work. Dodpfxjzzqnxe Ak Ascp

Condition: used, Year of construction: 1990, machine/vehicle number: 356.8.300, Single capping head; Working direction: left-right; Dcodpfe Ahk Nmex Ak Asp Without cork orientator.

Condition: used, functionality: fully functional, Year of construction: 2004, Mazak Super Turbo-X612 Mk II (2004) CO2 laser cutting machine with 4,000 W laser output for 4,000 x 2,000 mm sheets up to 25 mm thick. Mazatrol L32B CNC control. CNC CONTROL Controller: Mazatrol L32B LASER Laser source: CO2 Rated laser output W: 4.000 TRAVELS & WORK AREA X-axis travel mm: 4.185 Y-axis travel mm: 2.020 Z-axis travel mm: 100 Max. sheet size mm: 4.000 x 2.000 Max. table load kg: 1.500 DIMENSIONS Machine weight kg: 23.900 EQUIPMENT & OPTIONS • Mazatrol L32B CNC control • CO2 laser resonator, 4,000 W rated output Djdpfx Ake Aa A Tuj Ajcp

Condition: excellent (used), functionality: fully functional, Westfalia Separator AG CIP System Westfalia Separator AG CIP System | Tank, Pump, Heat Exchanger System type: CIP (Cleaning In Place) Manufacturer: Westfalia Separatoren AG / GEA Group A complete CIP (Cleaning In Place) installation from the renowned manufacturer Westfalia Separator AG, designed for automatic cleaning and disinfection of process lines in the food and dairy industries. The system is equipped with stainless steel tanks with heating jackets, recirculation pumps, a GEA Ecoflex plate heat exchanger, and a control cabinet. Main components of the system: 1. Stainless steel CIP tanks Brand: Westfalia Separator AG Type: CIP-TANK 3000 L (2 pcs) Serial numbers: 96/00408-1 and 96/00408-2 Year of manufacture: 1996 Capacity: (2×) 3300 liters Operating pressure: 0 bar Operating temperature: 80 °C Dimensions: (2×) 3000 × 1900 × 2300 mm 2. Stainless steel platform with stairs Dimensions: 2950 × 2200 × 2400 mm 3. Stairs Dimensions: 600 × 600 × 500 mm 4. Centrifugal pump Brand: Hilge Type: EURO-HYGIA-B-SUPER-II/60 B Number: 23/96/11349 Capacity: 30 m³/h Power: 11.0 kW Dimensions: 750 × 350 × 450 mm 5. Flow meter Brand: Endress + Hauser Model: Promag 53 Dimensions: 350 × 200 × 200 mm Accurate flow measurement for CIP media. 6. Anema centrifugal pump Dimensions: 530 × 300 × 300 mm 7. Plate heat exchanger Brand: GEA Ecoflex GmbH Type: VT20 CDS Serial number: 170/13832 Dimensions: 900 × 550 × 1500 mm High efficiency heat transfer for CIP solution preparation. 8. Control cabinet Dimensions: 670 × 220 × 800 mm Responsible for controlling and monitoring CIP system operation. 9. Stainless steel buffer tank (CIP tank) Tank dimensions: Ø 800 × 800 mm Overall dimensions: 1150 × 900 × 1770 mm 10. Anema centrifugal pump, number: 32078 Operating pressure: 12 bar Dimensions: 650 × 400 × 450 mm The Westfalia Separator AG CIP system is a comprehensive solution for cleaning process installations, providing: Dcjdpfx Aksxtvb Us Aep - high process hygiene, - monitoring of cleaning parameters (temperature, flow, time), - integration capability with dairy, food, or beverage production lines. The use of components from GEA, Hilge, Endress + Hauser, and Anema ensures reliability and long service life of the system.

Condition: excellent (used), two speed with switch belt gear Djdpfoyxl Nzex Ak Ajcp motor power 0,8kW clamp connection 380V

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 406 mm, travel distance Y-axis: 356 mm, travel distance Z-axis: 381 mm, table width: 305 mm, table length: 914 mm, table load: 227 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 11,200 W, number of slots in tool magazine: 31, tool weight: 5,400 g, number of axes: 3, This 3-axis HAAS Super Mini Mill was manufactured in 2024. It features impressive travels of 406 mm in the X-axis, 356 mm in the Y-axis, and 381 mm in the Z-axis. The machine includes a robust table size of 914 x 305 mm and a maximum table load of 227 kg. If you are looking to get high-quality machining capabilities, consider the HAAS Super Mini Mill vertical machining centre we have for sale. Contact us for further details. • Condition: Showroom machine • Working hours: 0 • Spindle nose to table: max 19.0 in / 483 mm; min 4.0 in / 102 mm • Spindle max torque: 22.0 ft-lbf @ 5000 rpm / 29.8 Nm @ 5000 rpm • Spindle drive system: Direct Speed, Belt Drive • Spindle bearing lubrication: Air / Oil Injection • Spindle cooling: Air Cooled • Table length: 36.0 in / 914 mm • Table width: 12.0 in / 305 mm • Table T-slot width: 0.626 in to 0.630 in / 15.90 mm to 16.00 mm • Table T-slot center distance: 4.33 in / 110 mm • Number of standard T-slots: 3 • Max cutting feedrate: 833 ipm / 21.2 m/min • Rapids (X/Y/Z): 1200 ipm / 30.5 m/min • Max thrust (X/Y/Z): 2000 lbf / 8896 N • Tool changer type: Side-Mount Tool Changer (SMTC) • Tool changer capacity: 30+1 • Max tool diameter (full): 2.5 in / 64 mm • Max tool diameter, large (adjacent empty): 5.0 in / 127 mm • Max tool length (from gage line): 7.00 in / 178 mm Dsdpfxjz Nxwij Ak Ajcp • Tool-to-tool (avg): 2.80 s • Chip-to-chip (avg): 4.20 s • Coolant capacity: 45 gal / 170 L • Air required: 4 scfm @ 100 psi / 113.0 L/min @ 5.5 to 6.9 bar • Inline air hose & coupler: 3/8 in • Input AC voltage (3 phase) - Low / High: 220 VAC (30 A) / 440 VAC (15 A) • Shipping dimensions: 90.0 in x 80.0 in x 99.0 in / 229 cm x 203 cm x 252 cm • Shipping weight: 4650 lb / 2109.2 kg Technical Specification Taper Size BT 40

Condition: ready for operation (used), functionality: fully functional, Manual feed of the cutting head Disc diameter 350 mm Dcodpfx Ajz E Dy Hek Aep 3000 rpm Cutting angle adjustment -45/+45 degrees Pneumatic clamping Cutting process initiated with two buttons Safety switch Minimum air pressure 6 bar Year of manufacture 1995 400V

Condition: excellent (used), Year of construction: 2012, control type: CNC control, controller manufacturer: Mazatrol, laser power: 4,000 W, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,525 mm, travel distance Z-axis: 150 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, overall weight: 12,700 kg, total length: 8,500 mm, total width: 4,500 mm, total height: 2,800 mm, Machinery manufacturing: Producing machine covers, brackets, panels and structural components. Automotive industry: Manufacturing brackets, components and prototype parts. Agricultural machinery: Producing parts for tractors, trailers and agricultural equipment. Construction and steel fabrication: Cutting connection plates, mounting brackets and structural parts. HVAC and ventilation: Manufacturing ventilation components, panels and ductwork. Automatic sheet loading and unloading system – Large overhead gantry with integrated sheet handling equipment, suitable for automated material transfer. Mazak CELL 510 VA automation system – Separate automation control cabinet, identified by its nameplate and operating panel. Automatic pallet changer / shuttle table – Two cutting pallets allow material preparation and unloading while the machine processes another sheet. Dust extraction equipment – Large extraction ducting and associated equipment visible, although the complete filtration installation cannot be verified. Safety enclosure – Perimeter safety fencing with access gates and emergency-stop controls around the automation system. Machinery manufacturing: Producing machine covers, brackets, panels and structural components. Automotive industry: Manufacturing brackets, components and prototype parts. Agricultural machinery: Producing parts for tractors, trailers and agricultural equipment. Construction and steel fabrication: Cutting connection plates, mounting brackets and structural parts. HVAC and ventilation: Manufacturing ventilation components, panels and ductwork. Electrical cabinet manufacturing: Cutting enclosures, control panels and mounting plates. Main technical specifications Working area: Approximately 3,050 × 1,525 mm Mild steel cutting capacity: Up to 25 mm Stainless steel cutting capacity: Approximately 12 mm Aluminium cutting capacity: Approximately 10 mm Working area X Axis: 3050mm Working area Y Axis: 1525mm Working area Z axis: 150mm Table Length: 3000mm Table Width: 1500mm Power resonator: 4000kW / Amp Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Sheet master loading arm:yes Dust collector: yes Length: 8500mm Width: 4500mm Dsdpfxe Agfxnj Ak Aecp Height: 2800mm Weight: 12700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), operating hours: 200 h, functionality: fully functional, machine/vehicle number: H05107, Bench drill press Knuth SSB 50nSuper MK 4 WORK AREA Drilling capacity 50 mm Threading capacity, steel M 30 Table clamping surface 580 mm x 460 mm Quill stroke 200 mm Manual table travel 515 mm Motorized table travel 405 mm Table swivel range (max.) ± 50° Column diameter 180 mm Distance from spindle nose to table surface 575 mm Distance from spindle nose to base 1165 mm Dcodpfx Akjzqt U Hj Asp Overhang 360 mm MAIN SPINDLE Speed range 50 rpm - 2000 rpm Spindle taper 4 MK FEED Quill feeds 0.08; 0.12; 0.17; 0.24; 0.35; 0.50 mm/rev

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 01.01.0555, turning diameter over cross slide: 850 mm, spindle bore: 102 mm, turning diameter: 1,200 mm, turning diameter over bed slide: 850 mm, turning diameter over top slide: 1,600 mm, center height: 600 mm, center width: 800 mm, spindle speed (max.): 400 rpm, type of input current: three-phase, overall weight: 15,000 kg, Gurutzpe Super BT 600 x 3000mm lathe, with dimension display and probe-based copying function, swing over bed 1180mm, swing over cross slide 850mm, swing over carriage 1570mm, distance between faceplate and carriage 620mm, spindle bore 102mm, speeds 2.8-400 rpm, 30 hp motor, four-jaw chuck with a diameter of 1000mm, bed width 800mm, tailstock spindle diameter 140mm, maximum weight on lathes between centers 10 tons with a steady rest of 12 tons, estimated weight of the lathe and accessories 15000kg, in very good condition. Dcsdpfxsztz Hce Ak Aop

Condition: used, total length: 6,800 mm, total width: 2,200 mm, total height: 2,000 mm, Empty weight: 11.000 kg Price: On request - Documentation available: Yes - Drive system: Conventional - Centre height [mm]: 630 - Swing over bed [mm]: 1300 - Carriage turning diameter [mm]: 1000 - Distance between centres [mm]: 4000 - Bed width [mm]: 700 - Spindle bore [mm]: 120 - Min. spindle speed [rpm]: 2.8 - Max. spindle speed [rpm]: 400 - Options: Travelling steady, Three-jaw chuck, Four-jaw chuck, Quick-change tool post, Removable bed, Fixed steady - Swing over removable bed [mm]: 1700 - Transport dimensions: 6800mm x 2200mm x 2000mm (l x w x h) - Transport weight [kg]: 11000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Dedpsx Iriajfx Ak Ascp Lukas van Rossum