Used Steinel Sh for sale (22)

Year of construction: 1968, condition: used, machine/vehicle number: 1623, Machine designation Horizontal milling machine Stock-No. MA818 Manufacturer STEINEL TYPE SH 3,5 Year of manufacture 1968 Machine no. 1623 Weight 500kg Dwsdpjbpitrofx Ah Ujd Size W 550 x L 670 x H 1360 mm Speed of milling spindle 63 - 1250 rpm clamping surface 600 x 115 mm table width 160 mm Table travel 300 mm technical data: 380 Volt accessories: operating instructions, circuit diagrams (Changes and errors in the technical data, specifications and prices and subject to prior sale!)

Condition: used, Tool milling machine STEINEL SH4, speeds 63 - 1,250 rpm, table size approx. 900 x 200 mm Dwodjxva S Nspfx Ah Ujd

Condition: good (used), Year of construction: 1978, functionality: fully functional, 1 used orbital / riveting machine Brand: STEINEL Model: NR 10 Year of manufacture: approx. 1978 Technical details Table surface: 350 x 250 mm Throat depth: 250 mm Adjustable table: 400 mm Air pressure: up to 10 bar Total connected load: 1.3/1.6 kW Machine weight approx.: 0.45 t Dsdpfxewxxw Se Ah Uowd Space requirement approx. LxWxH: 0.7 x 0.45 x 1.8 m Details without guarantee

Condition: used, Year of construction: 1991, Technical details: turning diameter over bed: 720 mm turning dia. over face-slide: 430 mm turning length: - mm centre distance: 2000 mm control: Zyklengesteuert/cycle controlled revolution per minute: 1-1800 U/min max. torque on the spindle: 3200 /2700 Nm feed motor: 20000 N Dwodpfx Ahexfz Aus Ued rapid motion - x-axis: 3,5 m/min rapid motion - y-axis: - m/min spindle passage: 106 mm operating hours - idle run: - h tailstock taper ISO: MK 6 tailstock quill stroke: 225 mm max. workpiece weight between centers: 2500 kg max. workpiece weight -without tailstock: 500 kg voltage: 380/500 V control voltage: 24 V total power requirement: 33 KVA Weight approx.: 5,5 t dimension machine xH: 4 x 2,0 x 5,2 m Voest Alpine E 70 or Weiler E 70 are generally the same model, offered under different brand names. Prepared for automatic chuck (clamping cylinder + pneumatic control) “Constant cutting speed” refers, in the case of the lathe Voest Alpine Steinel E 70, to an automatic speed control that adjusts the spindle speed according to the respective workpiece diameter. *

Condition: good (used), Year of construction: 1995, turning diameter over bed slide: 810 mm, swing diameter over cross slide: 510 mm, quill stroke: 225 mm, quill diameter: 115 mm, center height: 400 mm, spindle speed (min.): 1 rpm, spindle speed (max.): 1,800 rpm, bed width: 480 mm, overall weight: 6,400 kg, torque: 3,150 Nm, We are offering you a lathe from the brand "VOEST ALPINE" (WEILER), model E80/3. For further details, please refer to the attached PDF. The extensive range of accessories is also listed there. Best regards, Djdpfjw Tq Tysx Ah Uewd Wiegand Co.

Condition: excellent (used), STEINEL hand lever table press / punch pestle PHK 8. Dwsdpfxsum Huxj Ah Usd

Condition: good (used), Year of construction: 1975, bore capacity in steel (diameter) siehe Bild mm bore stroke 60 mm Drilling field Ø D on fixed drill insert 140 mm dimensions of the machine ca. 1,83 x 0,82 x 0,5 m --> With the Steinel BS 140 multi-spindle drilling machine you only need a fraction of the time fraction of the time compared to single-spindle drilling on normal drilling machines. drilling machines. --> Simple operation and maintenance speak in favour of the machine. --> The power of the motor makes it possible to drill 6 holes with a Ø 6 mm sharpened drilling tool to a depth of 7 - 8 mm in one go. The feed pressure to be applied depends on the operator. --> On the BS 140 multi-spindle drilling machine, the articulated drilling spindles are mounted in fixed drilling inserts. The central holder in the machine head corresponds to the Ø of the drilling field Djdpjwkvmusfx Ah Uewd Translated with (free version)

Condition: used, Horizontal machining center with pallet changer STEINEL type BZ 24 FFZ with CNC control SIEMENS Sinumerik 850 M serial no. 77 year of construction 1990 Travel X: 630 mm, Y: 500 mm, Z: 500 mm Table size per pallet 400 x 400 mm Pallet rotation B-axis Spindle speed max. 7100 rpm infinitely variable Dwjdpsdzqmrsfx Ah Usd Tool holder ISO 40 Mains connection 380 Volt, 50 Hz, 80 Amp. - Tool changer with 60 tool positions and double arm gripper - Pallet changer with 4 pallets - Horizontal pallet position for machining, axis movement = X-axis - Pallet rotation = B-axis - Spindle ram as Z-axis - Spindle ram with transverse movement as Y-axis - KSS spray nozzles on the spindle ram and in the work area - Coolant device with chip conveyor under the work area - CNC control SIEMENS Sinumerik 850 M - Interface for data transfer Space requirement L x W x H 9000 x 3100 x 3200 mm Weight 13.5 tons Transport dimensions on truck: Machine with tool magazine L x W x H 9000 x 3000 x 3000 mm Chip conveyor L x W x H 4700 x 1000 x 1450 mm Container loading into a 40" OT HC is possible. good condition

Condition: used, Year of construction: 1990, functionality: fully functional, turning diameter over cross slide: 570 mm, turning diameter over bed slide: 340 mm, spindle speed (max.): 2,500 rpm, The machine operates fully. The machine bed is in excellent condition. Runs very quietly. Dwedpfx Ahsw E D Rqj Uod

Year of construction: 1982, condition: ready for operation (used), Two Steinel BZ20 milling machines are available. Travel X/Y/Z: 560mm/450mm/450mm, speed: 7000rpm, feed: 10000mm/min, tool holder: ISO30, tool positions: 40, rotary table diameter: 270mm, rotary table swivel range: 0°-24°, max. workpiece weight: 6kg. Control: Siemens System 8, weight: approx. 12000kg. Spare parts carrier. Dwjdpfx Ahetyax Ss Usd

Condition: used, Year of construction: 1983, useable stroke 30 mm Dedpfxsrp Im Re Ah Ujwd rivet shank max max. Ø 6 mm throat 130 mm spindle turning speed range 1400 U/min quill stroke 45 mm table surface area 284 x 235 mm Roll riveting machine with safety device for low-noise rolling riveting of all types of rivet heads. The rivet stopper is mounted at an angle in the roll rivet head on roller bearings so that it can tumble freely regardless of the rotation of the head. Fast and powerful movement of the roller rivet head thanks to a directly pressurized compressed air cylinder. Force requirements can be adjusted steplessly. Manual availbale

Condition: excellent (used), Steinel PHK 8Ø manual press in very good condition. Dwodpsum Hu Sofx Ah Ued

Condition: used, Year of construction: 1971, Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making milling machine, vertical milling machine -Manufacturer: Steinel, vertical milling machine type SV 4 -Clamping table: 740 x 200 mm -Cross table: 620 x 130 mm -Travel: X/Y/Z 340/100/300 mm Dwedjt E D D Iopfx Ah Ued -Spindle holder: MK2 -Speed: 112 - 2240 rpm right/left rotation -Feed: 0.10 - 0.71 mm/min -Quill stroke: 100 mm -Coolant system: -Dimensions: 1000/950/H1830 mm -Weight: 650 kg

Condition: used, Machine not operational, control system does not start Horizontal Machining Center with Pallet Changer STEINEL Type BZ 24 FFZ with CNC Control SIEMENS Sinumerik 850 M Serial No. 58 Year of manufacture 1990 Travels X: 630 mm, Y: 500 mm, Z: 500 mm Table size per pallet 400 x 400 mm Pallet rotation B-axis Spindle speed max. 7100 rpm, infinitely variable Tool holder ISO 40 Power supply 380 Volt, 50 Hz, 80 Amp. - Tool changer with 60 tool positions and double-arm gripper - Pallet changer with 4 pallets - Horizontally positioned pallet station for machining, axis movement = X-axis - Pallet rotation = B-axis - Ram spindle as Z-axis - Ram spindle with cross movement as Y-axis - Coolant spray nozzles on the ram spindle and in the work area - Coolant system with chip conveyor beneath the work area - CNC Control SIEMENS Sinumerik 850 M with TFT monitor - Interface for data transfer Space requirement (L x W x H) 9000 x 3100 x 3200 mm Weight 13.5 tons Machine not operational, control system does not start – otherwise in good condition Transport dimensions: Machine with tool magazine L x W x H 9000 x 3000 x 3000 mm Chip conveyor L x W x H 4700 x 1000 x 1450 mm Dedpfx Aedzqmfoh Ujwd

Condition: not inspected (used), Year of construction: 1967, Manufacturer: Steinel Model: 5 Station Rotary Transfer Drilling Machine BE 10 VK Year of Manufacture: 1967 Weight: approx. 3,000 kg General / Technical Data: 5-station rotary transfer special drilling machine for horizontal drilling with multi-spindle heads Drilling units: 4 units Station 1 – loading and unloading Station 2 – horizontal drilling unit type: BE 10 VK Station 3 – horizontal drilling unit type: BE 10 VK Station 4 – horizontal drilling unit type: BE 10 VK Station 5 – horizontal drilling unit type: BE 10 VK Djdpfx Aow H Rh Sjh Ujwd Feed of drilling units: mechanical feed via quill Drill heads: multi-spindle drilling units Rotary table: mechanical indexing in 5 positions, Ø 400 mm Workpiece clamping: hydraulic, via centric mandrel, workpiece Ø approx. 80 mm Machine dimensions (W x D x H): approx. Ø 1,800 mm x H = 2,200 mm Power supply / connected load: 380 Volt, 50 Hz Accessories / Special features: • Machine is designed for large-scale production • Features a robust cast iron machine table with lateral chip removal and separate coolant tank • Automatic safety guard door • Equipped with a 5-station rotary indexing table • Heavy cast iron machine table, ideal for the retrofit or rebuilding of a special purpose machine • Suitable for refurbishment or conversion

Condition: used, Year of construction: 1985, x-travel 560 mm y-travel 450 mm z-travel 450 mm rotary table dia. 270 mm rotary table tiltable 0 - 24 ° spindle taper ISO 30 spindle turning speed range 31,5 - 7100 U/min feed speeds 1 - 10.000 mm/min control SINUMERIK System 8 no. of tools in magazin 40 workpiece length 255 mm Dwedpjtycfuefx Ah Usd weight of tools max. 6 kg total power requirement 32 kW weight of the machine ca. 11,6 t = 5 axis machining centre Accessories: various tool fixtures, coolant

Condition: good (used), 1 x Drill + tap machine Steinel GT.6.52 Dsdpema Efysfx Ah Uswd Technical data: Speeds: 500/630/1000/1250 rpm power in steel: M 6 max.clamping diameter collet: 10 mm The machine can be visited under power.

Condition: used, Horizontal machining center with 2-fold shuttle table STEINEL type BFZ 5 with CNC control SIEMENS Sinumerik 810 M serial no. 34 year of construction 1988 Travel X: 500 mm, Y: 400 mm, Z: 320 mm Clamping surface, table surface 500 x 400 mm Tool holder ISO 40 Spindle speed max. 6300 rpm infinitely variable Main spindle drive 12 kW Mains connection 380 Volt, 50 Hz, 30 kVA Dodsutuyiepfx Ah Ujwd - Tool changer with 24 tool positions - Changing table with 2 stations - Interface for data transfer - Coolant unit with chip conveyor Space requirement L x W x H 4100 x 2500 x 2650 mm Weight approx. 8 tons good condition Transport dimensions: Machine L x W x H 3200 x 2500 x 2650 mm, approx. 7.5 tons. Chip conveyor L x W x H 3500 x 1100 x 2100 mm, approx. 600 kg

Condition: not inspected (used), Year of construction: 1969, Manufacturer: Steinel Model: 6-Station BE 10 VK, BE 6 VK Year of manufacture: 1969 Weight: approx. 3,000 kg General / Technical specifications: 6-station rotary transfer special-purpose drilling machine for vertical and horizontal drilling in small workpieces Drilling units: 7 pcs Station 1 – Loading and unloading Station 2 – Vertical drilling unit, type: BE 10 VK Station 3 – Horizontal drilling unit Station 4 – Horizontal and vertical drilling unit, type: BE 6 VK Station 5 – Horizontal spindle unit, type: BE VK, with additional guide. Mounting: slip bush Ø 28 mm Station 6 – Horizontal drilling unit and vertical tapping unit, type: BE 6 VK Feed advance for drilling units: mechanical feed via quill Drill heads: single-spindle drilling units Rotary index table: mechanically indexed in 8 positions, Ø 400 mm Workpiece clamping: manual, via collet Ø 30 mm Machine dimensions (W x D x H): approx. Ø 1,800 mm x H = 2,200 mm Power supply / connected load: 380V, 50 Hz Accessories / Special equipment: • The machine is designed for mass production use • The machine is equipped with a robust cast iron machine table with chip disposal at the rear and a separate large coolant tank (rear outlet) Dwodpsw H I R Rsfx Ah Ued • Safety light curtain (Sick) • Extensive accessories: spare parts, spindle units, and rotary indexing table • The machine features a 6-station rotary indexing table • Heavy cast iron machine table, ideal for rebuilding as a special-purpose machine

Condition: used, Year of construction: 1971, Manufacturer: Steinel Model: 8 Stations Drilling Units: Type Steinel BE 10 VK Year of Manufacture: 1971 Weight: approx. 4,500 kg General Information / Technical Data: 8-station rotary indexing special drilling machine for vertical and horizontal drilling operations in workpieces, with manual collet clamping. Drilling units: 7 units Station 1 – Loading and unloading Station 2 – Horizontal drilling unit, type: BE VK, power 2.2/3 kW, spindle mount: sleeve Ø 36 mm Station 3 – Vertical drilling unit, type: BE VK, collet chuck mounting Station 4 – Horizontal drilling unit, type: BE VK, spindle mount: sleeve Ø 36 mm Station 5 – Vertical spindle unit, type: BE VK, spindle mount: sleeve Ø 28 mm Station 6 – Horizontal drilling unit, type BE VK with additional guide, spindle mount: sleeve Ø 28 mm Dedpfjw E Hpvox Ah Uewd Station 7 – Horizontal drilling unit, type: BE VK, power 2.2/3 kW, spindle mount: sleeve Ø 36 mm Station 8 – Vertical spindle unit, type: BE VK, power 2.2/3 kW, spindle mount: sleeve Ø 28 mm Drilling feed: mechanical feed via quill Rotary indexing table: mechanically indexing, 8 positions, Ø 500 mm Workpiece clamping: manual via collet Ø 45 mm Machine dimensions (W x D x H): approx. 2,600 mm x 2,400 mm x 2,500 mm Power supply / connected load: 380 Volt, 50 Hz Accessories / Special Equipment: • Machine is designed for high-volume production • Features a robust cast machine table with chip conveyor to the rear and a separate large coolant tank • Extensive range of clamping devices and auxiliary tools included • The machine is equipped with a mechanically switched 8-station rotary indexing table • Coolant system with chip tray • Extremely stable machine bed, also ideally suited for rebuilding as a special-purpose machine

Condition: used, Year of construction: 1963, functionality: unexamined, Manufacturer: Steinel Model: 6 Stations Year of manufacture: 1963 Weight: approx. 2,500 kg General / Technical Data: 6-station rotary indexing special drilling machine for vertical and horizontal drilling in small workpieces Drilling units: 7 units Station 1 – Loading and unloading Station 2 – Vertical drilling unit Station 3 – Horizontal drilling unit Station 4 – Horizontal and vertical drilling unit Station 5 – Horizontal spindle unit Station 6 – Horizontal drilling unit and vertical thread-cutting unit Dwedpjwyn S Usfx Ah Ued Feed of the drilling units: mechanical feed via quill Drilling heads: single-spindle Tool diameter: approx. Ø3 mm to Ø8 mm Workpiece clamping: manually operated via collet chuck Machine dimensions (W x D x H): approx. Ø 2,000 mm x H = 2,200 mm Power supply / Connected load: 380 Volt, 50 Hz Accessories / Special features: • The machine is designed for large-scale production • The machine features a sturdy machine table with chip discharge to the underside of the table center with a separate large coolant tank • Extensive set of clamping and auxiliary devices included • The machine is equipped with a 6-station rotary indexing table

Year of construction: 1975, condition: used, General / technical data: used machine, speed via flat belt drive with 3 steps speed range 700 rpm, 1400 rpm, and 2800 rpm quill stroke: 90mm quill diameter : 35mm Pillar diameter : 60mm Dwjdpfx Ascu I Exjh Uod Throat : 200mm Mounting : Drill chuck direct mounting Table area 380mm x 300mm Dimensions : approx. 720mm x 480mm x 750mm Weight : 60 kg Remarks : first-class running of the drilling spindle, three-phase connection, solid industrial design, year of construction approx. 1975