Center lathe

VOEST-ALPINE STEINEL DA 180

Condition: ready for operation (used), An old Colchester engine lathe is available. Center height: 216mm, swing diameter over bed/cross slide/in gap: 432mm/267mm/711mm, distance between centers: 2000mm, spindle bore: 76mm, speed: 1600rpm, bed width: 343mm. Machine dimensions X/Y/Z: approx. 3200mm/1100mm/1400mm, weight: approx. 2500kg. An on-site inspection is possible. Pgedpfoy E S D Ejx Ai Dor

Condition: reconditioned (used), Year of construction: 1976, Universal tool milling machine Make: DECKEL Model: FP 1 Year of manufacture: 1976 - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray / RAL5008 gray-blue Mach. No.: 52860/08 Milling head number: 7296/80 Guarantee: 12 months single shift from delivery on the mechanics overhauled by us. The electrics and electronics are excluded from this, as they have only been subjected to a functional test. For machines located outside of our northern Bavarian sales area, the travel costs must be borne by the customer. geometric acceptance with test report Accessories: - 3-axis digital display Pgjdpfx Aemhfrrji Dsr FAGOR Innova 30i-M, new - Fixed table 600 x 210 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Operating instructions Used as seen The machine corresponds technically to the state of the year of manufacture.

Condition: excellent (used), Year of construction: 2010, feed length X-axis: 650 mm, feed length Y-axis: 500 mm, feed length Z-axis: 475 mm, feed rate X-axis: 6,000 m/min, feed rate Y-axis: 6,000 m/min, feed rate Z-axis: 6,000 m/min, table width: 450 mm, table length: 1,530 mm, X-Axis: 650mm Y-Axis: 500mm Z-Axis: 475mm Table Length: 1530mm Table Width: 450mm Table load: 350 Spindle speeds: 55 - 4000Rpm Feed rate X-Axis:6000mm/min. Feed rate Y-Axis:6000mm/min. Feed rate Z-Axis:3000mm/min. Length: 2300mm Width: 2550mm Height: 2200mm Weight: 2850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Pedpsxtmqtjfx Ai Djgr

Condition: ready for operation (used), Deckel FP 2 NC Universal Milling Machine Universal Milling Machine TNC 320 / 321 Travel distances: x- 300mm | y- 300mm | z- 400mm Stepless spindle speed 31.5 - 5000 rpm Feed rates 2-4000 mm/min Rapid traverse 4000 mm/min Pgedpfxexfkm Ao Ai Djr Tool holder SK 40 Quill stroke 80 mm Machine weight 1350 kg You are welcome to arrange an inspection appointment. We can also organise affordable shipping for you! You will receive a proper invoice. For international customers, we can also provide a net invoice. The requirement is a valid VAT ID number. Subject to prior sale. Visit our shop and take a look at our other offers. The specified company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Variations in technical data or errors in the description of the item may occur and are subject to change.

Condition: good (used), Year of construction: 1973, Centre height: 150 mm Centre distance: 760 mm Max. turning diameter over bed/cross slide: 300/165 mm Spindle bore: 32 mm Spindle mount, short taper per DIN 55027: Size 5 Quill taper of tailstock: MT 3 12 spindle speeds: 85 - 2000 rpm 48 feeds: 0.006 - 1.77 mm 48 metric thread pitches: 0.1 - 28 mm 58 inch threads: 75 - 2.5 TPI 19 module threads: 0.1 - 1.75 module 19 diametral pitch threads: 70 - 4 DP Electric drive: 220/380 V, 1400 rpm, 2.2 kW Weight: 800 kg Pgedeyu R Nkepfx Ai Djr Required space: 1800 x 770 x 1300 mm

Condition: used, Year of construction: 1992, functionality: fully functional, Weiler Matador VS2 lathe, year of manufacture 1992, three-jaw chuck, Multifix, rear splash guard, electric chuck guard. The machine is in good working condition and can be demonstrated under power by appointment. Pedpfx Ajx Sqvgji Dogr

Condition: like new (used), Year of construction: 2016, functionality: fully functional, turning diameter over cross slide: 230 mm, turning length: 810 mm, Equipment: documentation/manual, A like-new machine with accessories and complete documentation. Please examine the images carefully, paying attention to the operating hours! The machine will be available in approximately 4 weeks. Control: Heidenhain MANUALPlus 640 HSCI - TFT screen 15.1" - Control panel with alphanumeric keyboard for comments and numeric keypad - Control station can be swiveled 250° Tool drive for automatic turret - with 8 tool stations - Tool drive via gears and clutch - Drive speed adjustable, max. 4000 RPM - Milling with end mill Ø 12mm x 8mm x 45mm / min, C-axis via main drive - Main spindle speed 0.001°/min - 100 RPM Horizontal bed - Prism/flat guide hardened and ground Working area - Swing diameter over bed 400 mm - Swing diameter over compound slide 230 mm - Compound slide travel 220 mm Main spindle drive - Digital AC motor – 50% duty cycle, 16 kW Spindle head - Spindle head DIN 55026 A6 - Spindle diameter in front bearing 115 mm - Spindle bore 82 mm - Speed range RPM 1-3500 Cross slide - Feed rate range, plane mm/rev / Feed rate range, longitudinal mm/rev / Thread pitches mm 0.01-999.9 - Rapid traverse, plane/longitudinal m/min 5/10 Psdjy Tzhpepfx Ai Dsgr - Automatic central lubrication - Digital AC servomotors, plane and longitudinal Tailstock - Quill diameter mm 60 - Quill travel mm 140 - Taper attachment MK 4 - Clamping on the bed with clamping screws - Quill actuation and clamping manual - Tailstock roller guide Control - HEIDENHAIN MANUALplus 640 HSCI - V-constant for manual and automatic turning - Electronic stop turning and automatic turning - Simple cycle input in dialog with graphical images - Contour cycles: machining and finishing, longitudinal and planar, with tapers, radii and chamfers - Drilling cycles with / without pecking - Drilling/hole pattern cycle for axial and radial centering and drilling - Free-forming cycles DIN 76 and DIN 509 Form E+F - Special free-forming - Facing - Threads cylindrical, conical, flat threads with constant or variable pitch and with suggestion for thread depth - Thread drilling cycle with chip breaking function - Thread repair - Variation possibilities within cycles - ICP interactive contour programming - Programming according to DIN 66025 - Structured programming (UNTS) - Parallel programming - Geometry input absolute or incremental - Feed rate input mm/rev or mm/min - Input of a safety zone in front of the chuck or simple stop - Graphical program simulation (line or cutting path) Simulation in single block or complete program - Oriented spindle stop with angle indication - Automatic program run optionally single block or sequence cycles (with door locking) - Tool memory for 250 tools - Comfortable tool file - Technology database with 9 material/cutting tool combinations - Assignment of cutting speed / speed and feed rate - Part program memory 1.8 Gbyte Standard accessories - Chip tray - Machine light LED and energy-saving function - Leveling elements - Main motor fan circuit, temperature-controlled - Single-chamber filter for coolant cleaning, integrated into the coolant line (40 my) - Complete documentation

Condition: ready for operation (used), Year of construction: 2001, - USED - 5-AXIS VERTICAL MACHINING CENTRE WITH ROTARY AND TILTING TABLE X-AXIS TRAVEL: 500 mm Y-AXIS TRAVEL: 400 mm Z-AXIS TRAVEL: 400 mm SPINDLE: 9000 rpm; 13 kW; SK40 DIN 69871 B-AXIS: -10° +95 ° C-AXIS: 360 ° TABLE SIZE: 700 x 500 mm Pedpfx Aowl R Dqei Djgr MAX ADMITTED LOAD: 200 Kg TOOL MAGAZINE: CHAIN-TYPE ; 16 POS CONTROL UNIT: HEIDENHAIN TNC 430 WEIGHT: 3000 Kg OVERALL DIMENSIONS: 2000 x 1520 x 2140 mm ACCESSORIES: SWARF CONVEYOR NOTE: MANUAL 5th AXIS

Condition: used, Year of construction: 1996, greates pass round over bed 350 mm Pjdoy Ez Dzspfx Ai Degr swing diameter over face slide 200 mm centre distance 800 mm centre height 175 mm turning length 700 mm 3-jaw chuck Röhm Ø 160 spindle bore 46 mm spindle head Gr. 5, DIN55027 number of spindle speeds 18 spindle turning speed range 31,5-2500 U/min tailstock quill taper MT 3 weight of the machine ca. 1000 kg Joystick control 3-axis digital display Rotating center point Chip guard Multifix tool holder, size E, with 3 interchangeable cassettes Adjustable machine feet Coolant system Worklight Operating instructions included Very good condition, The machine comes from a training workshop at a large corporation

Condition: excellent (used), Year of construction: 2002, Grinding area: 550 x 200 mm Max. grinding height: 390 mm Pgjdpfx Aijzi R Sgj Dsr Grinding wheel dimensions: max. 225 x 20 mm Bore: 50.8 mm Speed: 2,880 rpm Max. table load: 200 kg Machine weight: 1,800 kg