Used Step Four for sale (6,232)

Condition: used, functionality: fully functional, Year of construction: 2010, operating hours: 7,406 h, load capacity: 5,000 kg, lifting height: 6,260 mm, free lift: 2,200 mm, fuel type: electric, mast type: triplex, construction height: 3,380 mm, fork carriage width: 3,820 mm, fork length: 1,800 mm, empty load weight: 12,858 kg, total length: 3,660 mm, drive type: Elektro, construction width: 3,000 mm, Four-way sideloader Load center: 700 Fork width: 200 mm Fork thickness: 60 mm Mast type: Triplex Condition: Ready for use and fully functional Dusdpfxexq Hvdj Ahnju Technical condition: Very good Battery voltage: 80V Battery capacity: 775Ah Battery year: 2010 Description: In addition to this Hubtex model, we have around 200 heavy-duty forklifts, compact forklifts, pallet trucks & sideloaders in stock at our Hamburg and Gdansk locations. Visit our website - sago-online. Leasing and financing on attractive terms are always possible with us. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to advise you in detail about this MQ50. P.S.: Our master forklift workshop specializes in repair, maintenance, refurbishment, and custom construction for forklifts from 8 tons and up. We can also offer your vehicle for sale on commission at our facilities. Fork positioner, Fork positioner opening range: 600 / 3820 mm Full free lift, Platform height: 492 mm;

Condition: used, functionality: fully functional, Year of construction: 2001, operating hours: 24,769 h, load capacity: 2,500 kg, lifting height: 5,700 mm, free lift: 1,600 mm, fuel type: electric, mast type: triplex, construction height: 2,640 mm, fork carriage width: 1,500 mm, fork length: 1,160 mm, empty load weight: 6,038 kg, total length: 3,280 mm, drive type: Elektro, construction width: 1,950 mm, Four-way sideloader Load center of gravity: 590 Fork width: 150 mm Fork thickness: 50 mm Mast type: Triplex Condition: Ready for use and fully functional Djdpfxswdknms Ahnouu Technical condition: Very good Battery voltage: 80V Battery Ah: 620Ah Battery year of manufacture: 2015 Description: In addition to this Baumann model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle, even without purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this EVS25/12-11.8/57 TR LK. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom construction for forklifts weighing 8 tons and above. We'd be happy to display your vehicle for consignment sale. Fork positioner, Full free lift, Platform height: 360 mm

Condition: used, functionality: fully functional, Year of construction: 1996, load capacity: 4,000 kg, lifting height: 4,500 mm, fuel type: electric, mast type: simplex, construction height: 3,010 mm, fork carriage width: 1,500 mm, fork length: 1,100 mm, empty load weight: 5,958 kg, total length: 3,280 mm, drive type: Elektro, construction width: 2,060 mm, Four-way sideloader Duedpfx Aewdkngjhnju Load center of gravity: 550 Fork width: 150 mm Fork thickness: 50 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: Very good Battery voltage: 80V Battery Ah: 620Ah Battery year of manufacture: 2017 Description: In addition to this Baumann model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this EVS40/12-11/45 ST LK8.5. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom construction for forklifts weighing 8 tons and above. We'd be happy to display your vehicle for consignment sale. Fork positioner, Platform height: 380 mm

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 9,871 h, load capacity: 5,000 kg, lifting height: 6,040 mm, free lift: 870 mm, fuel type: electric, mast type: simplex, construction height: 4,030 mm, fork carriage width: 1,760 mm, fork length: 1,620 mm, empty load weight: 10,694 kg, total length: 4,200 mm, drive type: Elektro, construction width: 2,770 mm, Four-way sideloader Load center of gravity: 800 Fork width: 200 mm Fork thickness: 50 mm Dujdpfx Ahou Dy A Eonsu Mast type: Standard Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Drums Front tires size: 660/250-480 Rear tires type: Drums Rear tires size: 413/178-285.8 Battery voltage: 80V Battery Ah: 775Ah Battery year of manufacture: 2017 Description: In addition to this Baumann model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle on an over-the-counter basis, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this 50/18/60 STC8.5. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom construction for forklifts weighing 8 tons and above. We would also be happy to display your vehicle for consignment sale. Fork positioner, Platform height: 530 mm

Condition: used, functionality: fully functional, Year of construction: 1996, load capacity: 3,300 kg, lifting height: 6,200 mm, free lift: 2,180 mm, fuel type: electric, mast type: triplex, construction height: 2,950 mm, fork carriage width: 1,520 mm, fork length: 970 mm, total length: 3,250 mm, drive type: Elektro, construction width: 1,850 mm, Four-way sideloader Load center of gravity: 400 Fork width: 150 mm Fork thickness: 50 mm Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Very good Description: In addition to this Baumann model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle on an open-end basis, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this EVS35-33/10-08/63TRDK7.5. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom construction for forklifts weighing 8 tons and over. We would also be happy to display your vehicle for consignment sale. Fork positioner, Dedpfewdkntox Ahnouu full free lift,

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 14,458 h, load capacity: 5,000 kg, lifting height: 8,240 mm, free lift: 3,060 mm, fuel type: electric, mast type: triplex, construction height: 3,940 mm, fork carriage width: 1,500 mm, fork length: 1,490 mm, empty load weight: 11,694 kg, total length: 3,600 mm, drive type: Elektro, construction width: 2,300 mm, Four-way side loader Dodpfx Aeu Dy Arohnjuu Load centre of gravity: 800 Fork width: 200 mm Fork thickness: 60 mm Mast type: Triplex Condition: Ready for use and fully functional Technical condition: very good Battery voltage: 80V Battery Ah: 620Ah Battery year of manufacture: 2014 Description: In addition to this Baumann model, we have around 200 heavy-duty forklifts, compact forklifts, forklifts & side loaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are possible for us at any time. We are also happy to buy your used vehicle freely, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail about this EMS 50/14-15.3/87-82TR QSTH P.S.: Our forklift master workshop specializes in repairs, maintenance, overhauls and special construction for forklifts from 8 tons. We would also be happy to display your vehicle for commission sale. Platform height: 430 mm, forklift has height-adjustable cabin Full free lift,

Condition: used, functionality: fully functional, Year of construction: 2006, operating hours: 7,009 h, load capacity: 3,000 kg, lifting height: 4,550 mm, free lift: 2,130 mm, fuel type: gas, mast type: duplex, construction height: 2,830 mm, fork carriage width: 1,200 mm, fork length: 1,200 mm, empty load weight: 5,100 kg, total length: 1,930 mm, drive type: Treibgas, construction width: 2,270 mm, Four-way sideloader Load center of gravity: 600 Fork width: 150 mm Fork thickness: 45 mm Mast type: Duplex Duedpfx Ahevg Taxonju Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Bandages Front tires size: 16x7x10,5 Rear tires Type: Superelastic Rear tires size: 23x10-12 Description: In addition to this Combilift model, we have approx. 200 heavy-duty forklifts, compact forklifts, forklift trucks & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are possible for us at any time. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail about this C3000 P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on consignment. Heating, full cab, full free lift, Platform high: 480 mm

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 10,097 h, load capacity: 4,000 kg, lifting height: 3,980 mm, free lift: 1,940 mm, fuel type: gas, mast type: duplex, construction height: 2,780 mm, fork carriage width: 1,360 mm, fork length: 1,200 mm, empty load weight: 6,100 kg, total length: 2,200 mm, drive type: Treibgas, construction width: 2,320 mm, Four-way side loader Load center: 600 Fork width: 150 mm Fork thickness: 50 mm Mast type: Duplex Condition: Ready for operation and fully functional Dusdpfx Ahoy Hx Utjnou Technical condition: Very good Front tires type: Superelastic Front tires size: 27x10-12 Rear tires type: Superelastic Rear tires size: 200/50-10 Description: In addition to this Combilift model, we have around 200 heavy-duty forklifts, compact forklifts, industrial trucks, and side loaders in stock at our Hamburg and Gdansk warehouses. Visit our website - sago-online. Hire purchase and financing on favorable terms are always possible for us. We are also happy to purchase your used equipment directly, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail on this C4000. P.S.: Our master forklift workshop specializes in repair, servicing, overhaul, and special construction for forklifts from 8 tons. We are also happy to offer your vehicle on commission sale in our facility. Heater, Full cab, Full free lift,

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 7,865 h, load capacity: 6,000 kg, lifting height: 6,570 mm, free lift: 2,240 mm, fuel type: gas, mast type: triplex, construction height: 3,630 mm, fork carriage width: 1,550 mm, fork length: 1,580 mm, empty load weight: 9,800 kg, total length: 4,160 mm, drive type: Treibgas, construction width: 2,500 mm, Four-way Side Loader Load Centre: 600 Fork Width: 200 mm Fork Thickness: 65 mm Mast Type: Triplex Condition: Ready for use and fully functional Technical Condition: Very good Front Tyres Type: Superelastic Front Tyres Size: 355/65-15 Djdpsyvwc Uofx Ahneuu Rear Tyres Type: Superelastic Rear Tyres Size: 27x10-12 Description: In addition to this Combilift model, we have approximately 200 heavy-duty forklifts, compact forklifts, standard forklifts, and side loaders available in our Hamburg and Gdansk warehouses. Visit our website – sago-online. Hire purchase and financing at attractive terms are always possible with us. We are also happy to purchase your used machine outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this C6000SL. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons upwards. We can also offer to display your vehicle for commission sale in our facilities. Fork positioner, heater, full cabin, full free lift,

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 3,516 h, load capacity: 4,500 kg, lifting height: 4,040 mm, free lift: 2,000 mm, fuel type: gas, mast type: duplex, construction height: 2,770 mm, fork carriage width: 1,350 mm, fork length: 1,600 mm, empty load weight: 6,400 kg, total length: 2,200 mm, drive type: Treibgas, construction width: 2,530 mm, Four-way side loader Load centre: 600 mm Fork width: 125 mm Fork thickness: 50 mm Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: good Front tyres type: Superelastic Front tyre size: 27x10-12 Rear tyres type: Superelastic Rear tyre size: 200/50-10 Description: In addition to this Combilift model, we have around 200 heavy-duty forklifts, compact forklifts, lift trucks, and side loaders available in our warehouses in Hamburg and Gdansk. Please visit our website - sago-online. Leasing and financing on favourable terms are always available. We are also happy to purchase your used equipment directly, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will advise you in detail on this C4500. P.S.: Our forklift master workshop specialises in repair, maintenance, overhaul, and special construction for forklifts from 8 tonnes upwards. We are also happy to offer your vehicle for commission sale at our premises. Fork positioner Fork positioner opening range: 430 / 1310 mm Dusdpeyp Nywjfx Ahneu Heater, full cab, full free lift Platform height: 520 mm

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 427 h, load capacity: 2,000 kg, lifting height: 4,980 mm, free lift: 1,240 mm, fuel type: electric, mast type: triplex, construction height: 2,910 mm, fork carriage width: 3,160 mm, fork length: 1,795 mm, empty load weight: 10,036 kg, total length: 3,530 mm, drive type: Elektro, construction width: 3,460 mm, Four-way side loader Load center: 600 mm Fork width: 150 mm Fork thickness: 50 mm Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Very good Front tire type: Cushion tires Battery voltage: 80V Battery capacity: 775Ah Description: In addition to this Combilift model, we have approximately 200 heavy-duty forklifts, compact forklifts, standard forklifts, and side loaders in stock at our warehouses in Hamburg and Gdansk. Visit our homepage - sago-online. Leasing and financing under attractive conditions are always possible. We are also happy to purchase your used equipment outright, even if you do not buy a machine from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this PKD 20/21/50. P.S.: Our master workshop specializes in repair, maintenance, overhaul, and customization for forklifts starting at 8 tons. We are also happy to offer your equipment for consignment sale at our premises. Duodpfx Ahjyvwcusnsu Fork positioner, Full free lift, Platform height: 380 mm

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 4,190 h, load capacity: 3,000 kg, lifting height: 6,400 mm, free lift: 1,900 mm, fuel type: gas, mast type: triplex, construction height: 2,700 mm, fork carriage width: 1,200 mm, fork length: 1,350 mm, empty load weight: 5,300 kg, total length: 1,940 mm, drive type: Treibgas, construction width: 2,520 mm, Four-way Side Loader Load Center: 600 mm Fork Width: 160 mm Fork Thickness: 55 mm Mast Type: Triplex Condition: Ready for operation and fully functional Technical Condition: Very good Front Tire Type: Superelastic Front Tire Size: 23x10-12 Rear Tire Type: Superelastic Rear Tire Size: 16x7x10.5 Description: In addition to this Combilift model, we have approximately 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and side loaders in stock at our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Hire purchase and financing under attractive conditions are always available. We are also happy to purchase your used machines outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to give you detailed advice regarding this C3000. P.S.: Our master forklift workshop specializes in repairs, maintenance, overhauls, and custom builds for forklifts from 8 tons. We are also happy to display your vehicle for consignment sale. Fork Positioner Telescopic Forks: 1350 / 2350 mm Dujdox Imu Dopfx Ahnju Fork Positioner Opening Range: 360 / 1190 mm Heater, Full Cabin, Full Free Lift, Platform Height: 490 mm

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 15,628 h, load capacity: 2,500 kg, lifting height: 5,610 mm, free lift: 1,620 mm, fuel type: electric, mast type: triplex, construction height: 2,450 mm, fork carriage width: 1,400 mm, fork length: 1,050 mm, empty load weight: 6,500 kg, total length: 1,600 mm, drive type: Elektro, construction width: 1,500 mm, Four-way side loader Load center: 600 mm Fork width: 125 mm Fork thickness: 50 mm Dsdpfxsxqib Ae Ahneuu Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Very good Front tire type: Superelastic Front tire size: 406/178-266.7 Rear tire type: Superelastic Rear tire size: 559/254-406.4 Battery voltage: 48V Battery capacity: 930Ah Battery year: 2025 Description: In addition to this Combilift model, we have approximately 200 more heavy-duty forklifts, compact forklifts, counterbalance forklifts, and sideloaders in stock at our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease purchase and financing options are always available on favorable terms. We are also happy to purchase your used machine outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will gladly provide detailed advice about this CBE2500 model. P.S.: Our master forklift workshop specializes in repair, maintenance, refurbishment, and custom builds for forklifts from 8 tons upwards. We are also glad to sell your vehicle on a commission basis in our facility. Side shifter, fork positioner Fork positioner opening range: 290 / 1340 mm Full free lift,

Condition: ready for operation (used), Diameter: 200 mm Dusdpfoxb A N Ijx Ahneu Bore: 55 mm Overall height: 119 mm Weight: 23 kg

Condition: reconditioned (used), Year of construction: 2014, Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 600 Compact ----- The machine has been cleaned and fully inspected. Brief Summary: ----- - 5 Spindles - Powerful Motors - Left and top spindles controlled for width and height Detailed Description: ----- Technical Data: Working Width: 20-230 mm Working Height: 10-120 mm Number of Spindles: 5 1st Spindle - Bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool Circle: 125-145 mm Tool Circle for Rebating Cutter: 130-160 mm Axially Travel: 5 mm Rebating Device MarathonCoatine for table insert in front of the 1st lower tool holder Electronic digital display for rotary adjustment 2nd Spindle - Right ----- Motor with brake: 11.0 kW Shared motor with left-hand tool holder Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. tool diameter behind fence: 180 mm Max. groove depth: 35 mm Axially travel: 55 mm 3rd Spindle - Left ----- Motor with brake: Shared motor with the 2nd spindle Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. groove depth: 35 mm Axially travel: 55 mm CNC-controlled radial spindle 4th spindle - top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads max.: 180 mm Max. groove depth: 35 mm Axially travel: 40 mm CNC-controlled radial spindle Split pressure shoe in front of upper tool holder, adjustable to the tool swing diameter and pivoting away from the tool, spring-loaded. Pressure shoe in front of, and discharge after, the upper spindle with electronic digital displays, integrated into the memory function or the PowerCom 5. Spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool travel: 93 - 200 mm Max. throat depth: 15 mm Axially travel: 35 mm Feed system ----- Electronic feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Dujdpfx Ajwzmu Rjhnju Durofer pointed tooth rollers with depth limiter and self-cleaning. Adjustment travel of the feed rollers relative to the left tool holder, axial 35 mm Machine electrical system ----- Operating voltage 400 V (voltage range 380–420 V), 50 Hz. All spindles IE2 design. Electrical design according to DIN VDE 0113, electrical equipment of industrial machines EN 60204, IEC 204-1. Other electrical regulations are not considered. Machine stand, tables, and ...

Condition: used, Number of boring spindles 7 St. Working width 160 mm Working height 120 mm Length of the planing table 2.000 mm Feed motor 2,2 kW Weinig PFA 17 N (Unimat) automatic planing and chamfering machine for four-sided planing and profiling of wood, equipped with a universal spindle. Spindle 1: Bottom / 35 mm / 4 kW Dsdpfszb Rffsx Ahnsuu Spindle 2: Right / 35 mm / 3 kW Spindle 3: Left / 35 mm / 5.5 kW Spindle 4: Right / 35 mm / 7.5 kW Spindle 5: Top / 35 mm / 5.5 kW Spindle 6: Bottom / 35 mm / 4 kW Spindle 7: Universal / 35 mm / 4 kW

Condition: excellent (used), CATALOG NUMBER 7186 TECHNICAL DATA - Max. planing width: 510 mm - Max. planing height, double-sided: 170 mm - Max. planing height, four-sided: 100 mm *Top section: - Infeed roller, toothed - Kickback fingers - Feed roller, toothed - Pressure bar - Planing shaft 510 mm, 4-knife (equipped with 2 knives) 4 kW - Outfeed roller, smooth *Bottom section: - Guide rail - Sliding roller – adjustable table with up/down roller - Planing shaft 510 mm, 2-knife 4 kW - 2 smooth, sliding, adjustable rollers *Rear section: - 2 side spindles + pressure unit - 1) right vertical 100 mm 2.35 kW - 2) left vertical 100 mm 2.35 kW - Spindle diameter: 35 mm Dusdozcc Syjpfx Ahneu - Spindles adjustable up/down, right/left - Manual thickness adjustment - 4 feed speed options - Feed motor 1.5 kW - Overall dimensions (L/W/H): 1940 x 1320 x 1140 mm - Weight: 1330 kg ADVANTAGES – Ideal for processing beams, flooring, etc. – Manufactured by the German brand KUPFERMUHLE – Used planer, very good condition Net price: 32,900 PLN Net price: 7,830 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 6950 TECHNICAL DATA - Max. working width: 220 mm - Max. working height: 130 mm – 4 spindles: 1) Bottom horizontal 220 mm, 5.5 kW 2) Right vertical 130 mm 3) Left vertical 130 mm; (2nd and 3rd spindle) 5.5 kW 4) Top horizontal 220 mm, 5.5 kW - 4 spindles with electric up/down adjustment - All spindles adjustable vertically and laterally - Spindle diameter: 40 mm - 4 powered, toothed feed rollers from above, including 1 double roller - 1 double rubber outfeed roller from above - Bottom rubber outfeed roller - Feed on Kardan shafts - Infinitely variable feed speed: 6–22 m/min - Feed motor: 2.2 kW - Lifting motor: 0.55 kW - Electric thickness adjustment - Infeed table length: 1970 mm - Central lubrication - Extraction port diameter: 3x120 mm, 140 mm - Fully enclosed cabin - Dimensions (LxWxH): 3350 x 1400 x 1400 mm, weight: 1700 kg – German production – Not repainted – Used planer in very good condition Net price: 33,900 PLN Net price: 8,070 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the case of significant exchange rate fluctuations, the price may change) Dodpfx Ahezcc Axjnouu

Condition: excellent (used), Catalogue number 7706 TECHNICAL DATA - Maximum workpiece width: 220 mm - Maximum workpiece height: 120 mm – 5 spindles: 1) Bottom horizontal: 220 mm, 4 kW 2) Right vertical: 120 mm 3) Left vertical: 120 mm (spindles 2 and 3: 7.5 kW) 4) Top horizontal: 220 mm, 5.5 kW 5) Bottom horizontal: 220 mm, 4 kW - All spindles are adjustable up/down, right/left - Spindle diameter: 40 mm - Pneumatic pressure rollers - 4 top infeed geared rollers, including 1 twin - 1 top outfeed smooth rubber roller - 1 bottom outfeed rubber roller - Feed driven by Cardan shafts - Stepless feed speed adjustment: 6–36 m/min - Feed motor: 2.2 kW - Lifting motor: 0.25 kW Dodozccz Iopfx Ahnouu - Equipped with brake - Electric planing thickness adjustment - Central table lubrication - Infeed table length: 1970 mm - Extraction port diameter: 4 x 120 mm, 140 mm - Dimensions (L x W x H): 3450 x 1600 x 1450 mm - Weight: 1112 kg Net price: 39,900 PLN Net price: 9,500 EUR (based on exchange rate of 4.2 EUR) (Prices may change subject to significant fluctuations)

Condition: excellent (used), Catalogue number: 7894 TECHNICAL DATA - Min / max working width: 20 / 165 mm - Min / max working height: 8 / 100 mm 4 spindles: 1) Lower horizontal, 165 mm, 4 kW 2) Right vertical, 100 mm, 4 kW 3) Left vertical, 100 mm, 4 kW 4) Upper horizontal, 165 mm, 5.5 kW - All heads adjustable up/down, left/right - Spindle diameter: 40 mm From above: - 6 driven, toothed infeed rollers (including 3 double rollers) - 2 driven outfeed rollers, smooth rubber From below: - Side pressure before and after the lower feed roller in the table - Lower infeed toothed, driven, swiveling roller in the table before the first spindle - 2 side pressure units - Driven outfeed roller, metal, smooth - All rollers pneumatically pressed - Length of infeed table: 1770 mm - Table height adjustment up/down - Central lubrication - Electric thickness adjustment - Lifting motor: 0.75 kW - Stepless feed speed adjustment Duedpfx Ajzccqcshnju - Feed motor: 3 kW - Feed via cardan shafts - Enclosed in cabin - Extraction connection diameter: 4 x 130 mm - Dimensions (LxWxH): 3200 x 1700 x 1850 mm - Weight: 2800 kg ADVANTAGES – 4-head configuration – Ideal for wet and dry timber – Infeed toothed, driven, swiveling roller in the lower table before the first spindle – Original DTR technical documentation + CE – Used machine, excellent condition Net price: 49,900 PLN Net price: 11,880 EUR (depending on exchange rate 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7219 TECHNICAL DATA - Maximum workpiece width: 200 mm - Maximum workpiece height: 150 mm Number of spindles: 4: 1) Bottom horizontal: 200 mm, 5.5 kW 2) Right vertical: 150 mm, 4 kW 3) Left vertical: 150 mm, 4 kW 4) Top horizontal: 200 mm, 5.5 kW - All heads adjustable up/down, right/left - Spindle diameter: 40 mm - Spindle speed: 6,000 rpm From above: - 6 driven infeed, serrated rollers (including 2 double rollers) - 1 driven outfeed, rubber-coated, double roller From below: - Driven, serrated infeed roller, swiveling on lower table - 3 lateral pressure units - Driven, smooth metal outfeed roller - All rollers pneumatically pressed - Infeed table length: 2,130 mm - Table height adjustable - Centralized lubrication - Electric thickness adjustment Duodpfszccn Ijx Ahnju - Lifting motor: 1.1 kW - Infinitely variable feed speed - Feed motor: 3 kW - Feed via Cardan shafts - Fully enclosed in soundproof cabin - Extraction connection diameters: 4 x 130 mm - Dimensions (LxWxH): 3,650 x 1,750 x 1,800 mm - Weight: approx. 3,000 kg ADVANTAGES – 4-head configuration – Ideal for both wet and dry wood – Full technical documentation (DTR) – Used machine, in very good condition Net price: 68,900 PLN Net price: 16,400 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in the event of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7221 TECHNICAL SPECIFICATIONS - min / max working width: 45 / 150 mm - min / max working height: 15 / 50 mm 3 spindles: 1) lower horizontal 11 kW 2) upper horizontal 22 kW (7000 rpm) 3) lower horizontal 5.5 kW spindle diameter: 40 mm - spindles 1 and 3 adjustable manually up/down, left/right - spindle 2 adjustable manually left/right - spindle 2 adjustable electrically up/down - spindles 2 and 3 equipped with brakes Top section: - 3 infeed, driven, metal toothed rollers - 1 outfeed, double, driven, rubber roller Bottom section: Dujdpfxozccb Uo Ahnou - infeed pressure device - grooved table - driven, smooth metal roller - electric thickness adjustment - variable feed speed: 6-24 m/min - feed motor: 3 kW - feed via Cardan shafts - infeed table length: 1970 mm - automatic table lubrication system - extraction port diameter: 1x150 mm, 2x140 mm - dimensions (LxWxH): 3070x2000x1800 mm - weight: 2000 kg ADVANTAGES – Made in Germany – With 3 heads – For processing lamellas – Grooved table – Complete set of cutter heads included – Unpainted – Very good condition – Used planer Net price: 125,900 PLN Net price: 29,980 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the event of significant exchange rate fluctuations, the price may be subject to change)

Condition: used, Year of construction: 1997, Beam planer 260 x 160 mm, trailing chamfer unit on the upper spindle, air cushion table with two-axis control for left and upper spindle, factory-new control system (latest Weinig version) Max. working width: 260 mm Max. working height: 160 mm Number of spindles: 6 1st spindle: bottom, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 2nd spindle: right, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm, motor power 11.0 kW (shared motor with left spindle) 3rd spindle: left, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm 4th spindle: top, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 5th spindle: bottom, spindle diameter 40 mm, motor power 11.0 kW, speed 6000 rpm, clamping length 270 mm 6th spindle: top, chamfering unit Motor brakes: mechanical Height adjustment of upper spindle: electric Optionally with/without feed Feed brake system: Yes Feed speed infinitely variable up to: 3 – 23 m/min Feed roller pressure: pneumatic Feed power: 4.0 kW Feed drive: cardan Lubricant pump: manual Max. planing depth: 10 mm Jointing cutter on jointer: Yes Powered rollers in table: 1 Control type: PLC control Spindle position display: mechanical numerical display Infeed rollers before jointer: Yes Air cushion table: triple track Central lubrication point: Yes Description: short infeed table 1050 mm with internal lighting Location: Nattheim Dodpfxowwwkhs Ahneuu

Condition: used, Year of construction: 2006, total width: 4,600 mm, total height: 1,830 mm, Dimensions (LxBxH): 217 x 460 x 183 cm Price: On request - Year: 2006 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 107402 - Number of spindles [pcs.]: 4 - └ Spindle 1: - - Spindle diameter [mm]: 40 - └ Spindle 2: Djdpfx Ahswnig Noneuu - - Spindle diameter [mm]: 40 - └ Spindle 3: - - Spindle diameter [mm]: 40 - └ Spindle 4: - - Spindle diameter [mm]: 40 - Feed table length [mm]: 1780 - Feed motor [kW]: 5.2 - Conveyor drive: Cardan drive - Diameter extraction nozzle [mm]: 140 - Voltage [V]: 400 - Transport dimensions: 2170mm x 4600mm x 1830mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2007, total width: 1,280 mm, total height: 1,670 mm, Empty weight: 1.500 kg Dimensions (LxBxH): 22 x 128 x 167 cm Four-sided planer Weinig Unimat 300 5 axis machine Year of construction 2007 Min/max working height 6/120mm Min/max working width 13/230mm Working speed 6/12 m/min Spindle speed 6000 Rpm Spindle diameter 40mm Input table length 2450mm Engines 1st spindle - Under 5.5kw 2nd/3rd Spindle - Link/Right 11kW 4th Spindle - Above 7.5kW 5th Spindle - Below 5,5kW Dujdpfjwng Uqex Ahneu Dimensions 4500x1300x1500mm (LxWxH), Weight 1500kg - Year: 2007 - Documentation available: No - CE certificate present: No - Transport dimensions: 222mm x 1280mm x 1670mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels