Used Stephen Zack Separator Systems for sale (43,262)

Condition: used, Laserline Dodpfxezdqkro Ak Ascp Type: LPC03 Lascon laser system with Lascon controller LPC03 Laserline diode laser The diode laser ›LDM 500-60‹ has a wavelength of 935 nanometers and an output power of 550 watts. Laser type: LDM 500-60 Wavelength of 935 nanometers +/- 10% Laser power: 550 W Supply voltage 100-264V +/- 10% Max. power consumption 1.7 kW Frequency 1 phase 47-63 Hz Laser class 1 Type: LDM 500-60 Lascon controller LPC03 The LPC03 has the processing power of a complete PC in a very small space. Instead of a hard drive, a removable flash disk has been installed. Due to the elimination of the hard drive and the extremely low heat generation, the LPC03 is therefore ideally suited for tasks in the field of measurement, control and regulation in an industrial environment. The fiber-coupled MA pyrometers QP004 and EP004 can be easily integrated into the device. The fiber optic cable is then simply connected to the rear panel. The housing also provides space for the PCI card PCI-1P. In conjunction with the LASCON measurement and control system, the operating system and software are installed on the flash disk. Technical data: Motherboard: Half Size CPU card Slots: 1 x PCI, length max. 180 mm Drives: none Storage medium: removable flash disk Connections: USB front; Ethernet, RS232, VGA, keypad, mouse, USB rear Housing: 212 mm x 80 mm x 250 mm (height x width x depth) Protection class: Front: IP40 Environment: 15°C - 40°C Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Item: inos iSENS laser sensors Item: inos iSENS laser sensors with control unit, cable, PC interface Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) Djdpfxjzdn T Rj Ak Ajcp We will gladly answer any further questions you may have over the phone.

Condition: used, Bosch Type: XR31-3 Description: Delta pick and place robot Manufacturer: Bosch Product type: Sigpack Systems XR31-3 Designation: Delta pick and place Year of manufacture: 2008 Pads/cycle (min): 185 Max. acceleration (g): 0.455 Cycle time (s): 0.32 Working area (mm): 48 x 9.2 Maintenance rate: None Assembly time (h): 2.5 Scope of supply: 1 x Delta robot XR 31-3 Dedpfjzdrzrex Ak Ajcp Manz operating panel pendant P51 1 x Rotary gripper Condition: used (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, TOX Type: TZ-VSN TOX – Full-Punch Riveting System The full-punch rivet initially separates all joining partners and then pushes the punched-out section out of the joining point. With its innovative technology for full-punch rivets, TOX PRESSOTECHNIK, the specialist for sheet metal joining, is expanding its range of products and services to include a future-oriented process. Full-punch riveting offers an additional mechanical sheet metal connection that is of great importance for lightweight construction and the joining of hybrid parts and assemblies. The rivet feeders, tongs, and tool holders are also designed to be so universal that full-punch rivets with diameters of 4.0 mm and lengths between 3.3 and 8.1 mm, as well as full-punch rivets with diameters of 5.0 mm and lengths between 3.9 and 9.0 mm, can be processed flexibly with both TOX hand tongs and TOX robot tongs. Press force: 55 kN Total stroke: 140 mm Rivet type: Diameter 5 x 4.6 Connection values Power: 3.4 kW Mains connection: 400/15/50-60 V/A/Hz Speed: 200 mm/s Mains type: 3P+N+PE Control voltage: 24 V DC Dedpfezdtffjx Ak Aecp Pre-fuse: 25 A Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Höcker Polytechnik frequency-controlled extraction system with an RSN ECO 40/12 briquetting press, designed to extract wood shavings and sanding dust from a small to medium-sized joinery or other woodworking workshop, complete with a connected hopper and briquetting press. Includes heat recovery and a number of extraction pipes with pneumatic dampers, suitable for equipping a workshop with approx. 5–10 machines. Technical data: Dedpfxeztvwie Ak Aocp - Fan 1: 11 kW - Fan 2: 3 kW - Press: 4.5 kW - Filter bags: 50 - Briquette: ~ 60 x 40 mm - Filter area: ~ 54 m² - Air flow rate: ~ 3,200 m³/h

Condition: used, VETTER Crane Technology PROFI Crane System / Two-Rail Portal Crane VETTER P300 PROFI Crane System Two-rail portal crane with crane bridge, manual travel unit, and electric chain hoist. For sale is a used VETTER PROFI crane system from the manufacturer Vetter Krantechnik GmbH. The system is suitable for assembly work, production, mechanical engineering, maintenance, logistics, as well as the safe lifting and positioning of heavy loads. Technical data Manufacturer: Vetter Krantechnik GmbH Type: P300 Design: PROFI crane system as a two-rail portal with crane bridge Year of manufacture: 2020 Load capacity: 1,600 kg Span of crane bridge: 5,100 mm Support distance L: 5,590 mm Support distance B: 5,100 mm Beam length: 6,170 mm Overall dimensions of the system: approx. 6,040 x 5,800 mm Bottom edge of crane bridge: 4,145 mm Bottom edge of portal beam: 4,567 mm Overall height: 4,905 mm Classification according to EN 15011: HC2 / S2 Steel structure group: 18/36/30 Operating voltage: 400 V / 50 Hz Control voltage: 24 V Max. permissible hoist weight: 85 kg Electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Year of manufacture: 2020 Load capacity: 1,600 kg Lifting speed: 4.0 / 1.0 m/min Lifting motor power: 1.50 / 0.37 kW FEM class: 2m / M5 Protection class: IP55 Duty cycle: 40 % Weight at 5 m lift: 65 kg Travel unit / trolley Manufacturer: Vetter Krantechnik GmbH Type: SiCO-HF 2000 A Variant A Load capacity: 2,000 kg Beam width: 66 - 220 mm Weight: 17 kg Equipment Two-rail portal crane system Crane bridge Electric chain hoist SIXX8AF Manual travel unit SiCO-HF 2000 A Load hook Floor control Main switch Steel support and beam construction Inspection book available EC declaration of conformity available Documentation available Accessories according to pictures Application areas Mechanical engineering Assembly work Production Maintenance Workshop operation Material handling Logistics Longest component: approx. 6.2 m Heaviest single component: approx. 300 kg Total weight of the system is approximately between 2,000 and 3,500 kg, depending on the installed steel profiles and foundation plates. Condition Used Optical condition according to pictures System was installed and in operation Inspection book and documentation available Scope of delivery VETTER P300 PROFI crane system Crane bridge Electric chain hoist SIXX8AF 1.6 t Manual travel unit SiCO-HF 2000 A Support and beam construction Floor control / operating elements Main switch Inspection book EC declaration of conformity Documentation Accessories according to pictures The machines, tools and other items visible in the pictures, which are not explicitly described, are not included in the scope of delivery. Dcsdpfjz Sn Ddjx Ak Aep Shipping or freight shipping possible. Subject to changes, errors and prior sale.

Condition: new, STRUERS Grinding and Polishing System Struers LaboPol-30 with LaboForce-100 and LaboDoser-100 Laboratory grinding and polishing system with extensive accessories For sale is an unused, unassembled grinding and polishing system from the manufacturer Struers. The LaboSystem is suitable for reliable and fast manual or semi-automatic grinding and polishing of samples in the laboratory and in production. Technical data: Manufacturer: Struers Type: LaboPol-30 Article number: Type of equipment: Grinding and polishing machine Power connection: 200–240 V / 50–60 Hz Dodpoz Srm Njfx Ak Aocp Automatic sample mover: Struers LaboForce-100 Article number: Power supply: 1 × 24 V DC Dosing unit: Struers LaboDoser-100 Article number: Version for square bottles Grinding and polishing disc: MD-Disc with conical mount Diameter: 300 mm Article number: Sample holder plate: Specimen Mover Plate 6 × 40 mm Article number: Equipment: LaboPol-30 grinding and polishing machine LaboForce-100 sample mover LaboDoser-100 dosing unit MD-Disc carrier disc, 300 mm Specimen Mover Plate, 6 × 40 mm Coupling for sample holder plate Glass desiccator, 250 mm, according to parts list Bottle set Service kit LaboPol-30 MD-Concert storage box Areas of application: Material testing Metallography Sample preparation Grinding and polishing Laboratory applications Quality assurance Research and development Industrial material testing Scope of supply: 1 × Struers LaboPol-30 – Art. No. 1 × Struers LaboForce-100 – Art. No. 1 × MD-Disc, 300 mm – Art. No. 1 × Specimen Mover Plate, 6 × 40 mm – Art. No. 1 × Coupling for sample holder plate – Art. No. 1 × Struers LaboDoser-100 – Art. No. 1 × Glass desiccator, 250 mm – Art. No. DE-720405 1 × Bottle set – Art. No. 1 × Service kit LaboPol-30 – Art. No. 16332999 1 × MD-Concert storage box – Art. No. Condition: New / unused Equipment has not yet been assembled or put into operation Main equipment in original transport packaging Optical condition and accessories as shown in the pictures The system has not yet been assembled and is in storage. Assembly and commissioning are not part of this offer and must be organized independently by the buyer. The image of the fully assembled system is an EXAMPLE IMAGE. The original photos show the actual delivery condition. The workbench shown and other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: good (used), mileage: 229,090 km, power: 55 kW (74.78 HP), first registration: 03/2015, fuel type: diesel, tire size: 195/65R15, axle configuration: 4x2, wheelbase: 2,730 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 5, emission class: euro5, number of seats: 2, total length: 4,380 mm, total width: 1,810 mm, total height: 1,800 mm, loading space length: 1,760 mm, loading space width: 1,500 mm, loading space height: 1,210 mm, Equipment: ABS, air conditioning, central locking, electric window regulation, power mirror, traction control, = Additional Options and Accessories = - Halogen lamp - None - Manual - Radio/cassette - Fabric - Partition = Notes = Configuration: 4x2, Payload: 666 kg, Tare weight: 1269 kg, Gross vehicle weight: 1935 kg, Unbraked towing capacity: 680 kg, Braked towing capacity, center axle: 995 kg, Cab type: Single cab, Air conditioning, Number of airbags: 1, Parking assistance: None, Electric windows, Electric mirrors, Partition, Radio/cassette, Color: White, Lighting type: Halogen lamp, Engine power: 55 kW (74 hp), Number of cylinders: 4, Engine displacement: 1560 cc, Fuel: Diesel, Euro: 5, Drive technology: Timing belt, Transmission type: Manual, Gears: 5, Power steering, ABS, ASR, Starter battery, Body type: Standard, Side panels, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 2, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, air conditioning, side door, spare wheel, Tire type: All-season tires = Additional Information = General information Number of doors: 1 License plate: VN-057-K Axle configuration Tire size: 195/65R15 Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire tread depth left: 5 mm; Tire tread depth right: 5 mm Axle 2: Tire tread depth left: 4 mm; Tire tread depth right: 4 mm Weights Unladen weight: 1,269 kg Payload: 666 kg Dcodpfx Akjz S Ag Tj Ajp GVW: 1,935 kg Functional Loading area height: 58 cm Maintenance APK (Technical Inspection): valid until 03/2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1

Condition: used, Year of construction: 2015, Moretto OTX 360VP_drying hopper system (2015) Professional industrial drying hopper Moretto OTX 360VP designed for efficient pre-heating and drying of plastic granulates. Equipped with an integrated air heater and suction valve, this compact unit ensures optimal moisture removal and consistent material flow prior to injection moulding or extrusion processes. Technical Specifications: 1. Manufacturer: Moretto S.p.A. (Italy) 2. Hopper Model: OTX 360VP 3. Serial Number: OP. Year of Manufacture: 2015 Dsdpe Af Na Hjfx Ak Ascp 5. Hopper Capacity: 360 litres () 6. Dry Weight (Hopper): 133 kg Integrated Components: 1. Air Heater Unit: 2. Model: Moretto HG3V90X 3. Serial Number: 1515357 4. Heating Power: 3.1 kW 5. Voltage / Frequency: 230 V / 50–60 Hz 6. Heater Weight: 20 kg 7. Suction Valve: 8. Model: Moretto AVIC50 9. Serial Number: OP. Valve Weight: 3.12 kg

Condition: used, Year of construction: 2015, Moretto OTX 360VP_Moretto drying hopper system (2015) Professional industrial drying hopper Moretto OTX 360VP designed for efficient pre-heating and drying of plastic granulates. Equipped with an integrated air heater and suction valve, this compact unit ensures optimal moisture removal and consistent material flow prior to injection moulding or extrusion processes. Technical Specifications: 1. Manufacturer: Moretto S.p.A. (Italy) 2. Hopper Model: OTX 360VP 3. Serial Number: OP. Year of Manufacture: 2015 5. Hopper Capacity: 360 litres () 6. Dry Weight (Hopper): 133 kg Integrated Components: 1. Air Heater Unit: 2. Model: Moretto HG3V90X 3. Serial Number: 1515357 4. Heating Power: 3.1 kW 5. Voltage / Frequency: 230 V / 50–60 Hz 6. Heater Weight: 20 kg 7. Suction Valve: 8. Model: Moretto AVIC50 9. Serial Number: OP. Valve Weight: 3.12 kg Dsdpfx As Af Nd Ask Aecp

Condition: used, Year of construction: 2023, Manufacturer: TEKA, Type: ZPF 9H, Year of manufacture: 2023, Serial no. A22341310061001, 22 kW, Exhaust/piping system, Dust collection container, Welding fume class W3 +++ Subject to prior sale! +++ +++ Attention: This unit is part of an online auction! +++ Dcsdpfxjz Tn Edj Ak Asp

Condition: used, This listing is for a Becton Dickinson BACTEC FX Blood Culture System The unit is in full working condition and ready for immediate use This blood culture system is a high-quality lab instrument manufactured by Becton Dickinson (Model: BACTEC FX). This automated system utilizes advanced fluorescence detection technology to provide rapid, reliable detection of bacteria and fungi in clinical blood samples. It features a modular, ergonomic design that supports efficient vial-activated workflow and data management, making it an essential tool for clinical microbiology laboratories. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. specifications_en: 100-240 VAC, 50/60 Hz, 8.0 Amps. Modular stack configuration (Top Unit 441385, Bottom Unit 441386). Dcodpfo Agpwnox Ak Ajp

Condition: used, Micro-welding head unit, spot welding system with welding head, inverter power source, I/O module, welding inverter MIYACHI PECO / AMADA WELD TECH GmbH, Type ISQ20 Compact ISQ-AC/DC-AWS-EXT-250A 22KVA + PECO F160S Year of manufacture: 2011 The system consists of the following components: - Welding inverter MIYACHI PECO, Type ISQ20 Compact ISQ-AC/DC-AWS-EXT-250A 22KVA with MFT1 control panel - External welding transformer MIYACHI PECO (mounted on the welding head frame) Dcedpfx Akjpy Uzys Aop - External interface module MIYACHI PECO, Type ISQ-MG - Spot welding head MIYACHI PECO, Type F160S - 25 mm stroke with Heidenhain measuring system - Connection cable Mains voltage: 3 x 400 V AC Mains frequency: 50 / 60 Hz Connected power: 22 kVA Welding current types: AC / DC Output power: max. 10 kA Output frequency: 1 - 10 kHz Welding time: max. 640 ms/pulse Current measurement: external ring coil Control panel: MFT1 (independent, detachable control unit) Analog input: pressure sensor for proportional valve Analog output: proportional valve control Interface: RS232 Protection class: IP30 - Fault monitoring and process monitoring - Monitoring of current, voltage, power, energy - Test pulse for part detection - Program memory for 99 programs Inverter dimensions W x H x D: 216 x 420 x 560 mm Inverter weight: approx. 21 kg Spot welding head MIYACHI PECO F160S Rated power: max. 5 kA Electrode stroke: 25 mm Closing stroke: pneumatic - Adjustable force activation from 1.2 to 550 N - Position measuring system Heidenhain Welding unit with 5 pneumatic cylinders and Festo Type CPX valve manifold Welding head mounted on a horizontal guide rail and movable by 20 mm via a pneumatic cylinder. 3 pneumatic cylinders for workpiece fixing are available (2 with 46 mm stroke, 1 with 20 mm stroke). Welding tip overhang 300 mm Welding tip height above floor 315 mm Dimensions of welding unit W x H x D 410 x 760 x 700 mm Weight of welding unit 75 kg Total weight 100 kg

Condition: used, Nikon Dcsdeyiy Hbepfx Ak Aop Type: VMZ-R3020 XYZ measuring ranges: 300 x 200 x 200 mm *TZ type with objective with low magnification: 250 x 200 x 200 mm Display resolution: 0.01 μm Maximum permissible deviation (MPE) EUX, MPE EUY, MPE 1.2 + 4L / 1000 µm EUXY, MPE 2.0 + 4L / 1000 µm EUZ, MPE 1.2 + 5L / 1000 µm Maximum sample weight 20 kg (Guaranteed accuracy: 5 kg) Camera Black and white / color 1/3 CMOS camera Working distance Type 1, 2, and 3: 50 mm Type 4: 30 mm Type TZ: (High magnification) 11 mm / (Low magnification) 32 mm Type A: 73.5 mm (63 mm with laser AF) Laser AF repeatability range 1), 3) 2σ ≦ 0.5 µm Illumination Type 1, 2, 3, and 4: Incident light, transmitted light, and 8-segment ring light with 3 angles of incidence *white LED / Type 4 has only 1 angle Type TZ: Left objective: Episcopic, dark field; Right objective lens: Incident light, transmitted light, dark field Type A: Incident light, transmitted light, and 8-segment ring light with 1 angle of incidence *white LED Power supply, power consumption AC100 V-240 V, 50/60 Hz / 4 A – 2 A Dimensions & weight Main body with table (W x D x H): 700 x 730 x 1793 mm / approx. 265 kg Controller: 190 x 450 x 450 mm / approx. 12 kg Footprint (W x D): 2700 x 2400 mm Condition: used Scope of delivery: (See picture) (Changes and errors in technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: good (used), Year of construction: 2003, IPE Compact Filter BG Jet 300 Year of manufacture: 2003 Filter area: 24.7 m3 Category: BIA-KAT Airflow rate: 4000 m3/h Dcodsy Dc R Tspfx Ak Asp Negative pressure: 2110 Pa Extraction diameter: 250 mm Compressed air connection: min. 6 bar - max. 8 bar Connected load: 5 kW Nominal speed: 4 kW Length: 2000 mm Width: 1000 mm Height: 3420 mm Weight: 725 kg (extraction) New filters Press: Genius 1 Hydraulic operating pressure: 190 bar Year of manufacture: 04/2003 Power: 7 kW Location: available from stock 54634 Bitburg - immediately available - Subject to prior sale Sold as seen, without warranty without guarantee

Condition: used, KUKA Type: KR 10 R900 sixx / KRC4 KUKA industrial robot complete system Robot: KR 10 R900 sixx Controller: KRC4 including KUKA smartPAD, cable set and accessories For sale is a KUKA industrial robot as a complete system from a commercial inventory. The system is ideally suited for automation tasks in industry, laboratories, assembly, handling, pick-and-place applications, testing tasks, and general robot applications. The 6-axis robot is designed for precise and rapid movements and can be used for gripping, positioning, feeding, moving, and processing components. The system offered consists of a robot arm, KRC4 controller, smartPAD, cables, and other accessories as shown in the pictures. Technical data: Manufacturer: KUKA Roboter GmbH Robot type: KR 10 R900 sixx Article No.: 10016515 Serial number: 500874 Payload: 10 kg Reach: 901 mm Axes: 6 Robot weight: 52 kg Controller: KRC4 Article No.: 11019802 Serial number: 224377 Controller weight: 33 kg Controller connection voltage: 1 x 230 V Mains frequency: 50/60 Hz Full load current: 12 A Mains fuse: 16 A Total system weight (approx.): 90–110 kg Robot dimensions (approx.): Reach 901 mm Controller dimensions (approx.): compact KRC4 design Software / Display according to system: KRC SR version: V8.2.3 HMI version: 8.2.0.4 B22 Base system: KSS 8.2.21_SR Installed options according to display: ExpertTech 3.1.1 Gripper-&-SpotTech 3.0.5 OrangeApps.MqttClient 2.2.12 Profinet KRC-Nexxt 2.2.7 RemoteService 1.0.2 UserTech 3.1.4 Description / Functions: The robot can be used for handling and automation processes, e.g. for gripping, transferring, feeding, positioning or processing workpieces. The 6 axes enable flexible movement in space. The compact design and the reach of 901 mm make the system particularly interesting for confined working areas and automated production cells. Total system weight (including controller and accessories, approx.): 90 – 110 kg Condition: used visually with typical signs of wear the screen and system information can be seen in the photos the visual condition can be seen in the pictures Dcsdjy Dt D Djpfx Ak Aep Scope of delivery: (See picture) KUKA KR 10 R900 sixx robot arm KUKA KRC4 controller KUKA smartPAD Connection and linking cables other accessories as shown in the pictures Important: The images are the only basis for the scope of delivery. "The table shown in the photos is not part of the sale." Commercial sale (Changes and errors in the technical data, information are subject to change!) We are happy to answer any further questions you may have by phone.

Condition: excellent (used), SIEMENS TELEPERM measuring transducer 315 bar Further data: see photos The measuring transducer is available in multiple units. Dcedpexmv Inefx Ak Aep

Condition: used, VETTER Krantechnik PROFI Crane System / Two-Rail Portal Crane VETTER P300 PROFI Crane System Two-rail portal crane with crane bridge, manual travel unit, and electric chain hoist For sale is a used VETTER PROFI crane system from the manufacturer Vetter Krantechnik GmbH. The system is suitable for assembly work, production, mechanical engineering, maintenance, logistics, as well as the safe lifting and positioning of heavy loads. Technical data Manufacturer: Vetter Krantechnik GmbH Type: P300 Design: PROFI Crane System as a two-rail portal with crane bridge Year of manufacture: 2020 Load capacity: 1,600 kg Span of crane bridge: 5,890 mm Support distance L: 5,590 mm Support distance B: 5,890 mm Beam length: 6,390 mm Overall dimensions of the system: approx. 6,590 x 6,590 mm UK crane bridge: 4,145 mm UK portal beam: 4,567 mm Overall height: 4,905 mm Classification according to EN 15011: HC2 / S2 Steel structure: 18/30/30 Dedpezgv U Ujfx Ak Ascp Operating voltage: 400 V / 50 Hz Control voltage: 24 V Max. permissible hoist weight: 85 kg Electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Year of manufacture: 2020 Load capacity: 1,600 kg Lifting speed: 4.0 / 1.0 m/min Lifting motor power: 1.50 / 0.37 kW Rated current: 7.7 / 5.4 A FEM class: 2m / M5 Protection class: IP55 Duty cycle: 40 % Number of load chains: 2 Weight at 5 m lift: 65 kg Travel unit / Trolley Manufacturer: Vetter Krantechnik GmbH Type: SiCO-HF 2000 A Variant A Load capacity: 2,000 kg Beam width: 66 - 220 mm Weight: 17 kg Equipment Two-rail portal crane system Crane bridge Electric chain hoist SIXX8AF Manual travel unit SiCO-HF 2000 A Load hook Floor control Main switch Conductor rail / Power supply Steel support and beam structure Documentation / Crane test book available Hoist test book available EC declaration of conformity (crane) available EC declaration of conformity (hoist) available Assembly and operating instructions available Accessories as shown in the pictures Application areas Mechanical engineering Assembly work Production Maintenance Workshop operations Material handling Logistics Longest component: approx. 6.4 m Heaviest single component: approx. 300 kg Total weight of the system is approximately between 2,000 and 3,500 kg, depending on the installed steel profiles and foundation plates. Condition Used Optical condition as shown in the pictures System was assembled and in operation Test book and documentation available Scope of delivery VETTER P300 PROFI Crane System Crane bridge Electric chain hoist SIXX8AF 1.6 t Manual travel unit SiCO-HF 2000 A Support and beam structure Control / Operating elements Main switch Documentation / Test book EC declarations of conformity Assembly and operating instructions Accessories according to pictures The machines, tools and other items visible in the pictures, which are not explicitly described, are not included in the scope of delivery. Shipping or freight forwarding is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Techman Type: Techman Robot TM5-900 The TM5-900 is equipped with an integrated image analysis system, which gives it the ability to "see," Dcodpfxszg Eyaj Ak Asp allowing it to handle assembly automation and inspection tasks with maximum flexibility. It works in collaboration with humans, sharing the same tasks without compromising productivity or safety. It offers the highest level of precision and efficiency while operating in the same workspace. The TM5-900 is the ideal cobot for the electronics, automotive, and food industries. Payload: 4 kg Reach: 946 mm Weight: 22.6 kg Perfect for Industry 4.0 Highest flexibility and adaptability Extremely low costs for automation and maintenance The TM5-900 is a true plug & play solution. Connect a monitor, mouse, and keyboard to the control unit, and the TM5-900 will be ready for use in just a few steps. Scope of delivery: Techman Robot TM5-900 Control unit, connection cable Operating device 2 calibration plates for the camera system 1 landmark Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: used, BÖLLHOFF Type: 9524-640-824-5 RIVSET Punch Rivet System with Punch Rivet Pliers Operating voltage: 400V 50 Hz Rated current: 12A Main fuse: 35 A Control voltage: 24 V Signal voltage: 0-10 V with Hydac cooling unit OK-EL2S/3.0/M/400-50/1 max. permissible riveting pressure: 250 bar Dcodpfjzgaabjx Ak Ajp max. permissible riveting force: 78 kN Weight of the pliers: approx. 279 kg Year of manufacture: 2012 The system was inspected by the manufacturer and is fully functional. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, DSM Type: DS 57 MDW, DS 57 SA + PosiControl + MultiPro TA Fastening system Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) Dcedpfx Akszgabfj Aep We will be happy to answer any further questions you may have over the phone.

Condition: used, Bluhm Systems Type: e-SolarMark FL Marking laser, fiber laser e-SolarMark FL. No functional guarantee (untested). Introduction: The e-SolarMark FL10W and 30 W are laser systems of Class IV according to the IEC 825 and EN 60825 guidelines (standards for applications with end customers). It is designed to be integrated into a system or operated separately with a protective housing. After installation, the laser system must meet the requirements for a product with a specific protection class, according to the aforementioned guidelines. The e-SolarMark is a laser system for marking and engraving plastics, metals, and foils, both stationary and in motion. Technical Specifications e-SolarMark Description The e-SolarMark system consists of two main components: 1. The marking unit with laser head (scanning head) with focusing lens. 2. The control unit includes the power supply, electronic control system, and firmware for system function, with I/O slots inside. The e-SolarMark includes a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm. Laser Specifications (Standard Version) Laser Type - Fiber Laser Laser Output Power - FL2 Model: 19W; typical Wavelength - 1062 nm typical Internal Modulation - 20 to 80 kHz Scanner Head Description: Scan Head - Two galvanometric mirror scanners with a hard, highly reflective dielectric coating. F-Theta Lens Types and Their Properties: Lens - Marking field 70x70 mm to 300 x 300 mm Focal distance - 192 mm Operating Environment Conditions: Relative humidity up to 80%, non-condensing Operating temperature 5 - 40°C Recommended operating temperature 15-25°C Dimensions W x H x D Dcjdpezgci Eefx Ak Ajp Laser unit 122 x 108 x 495 mm Control unit 520 x 380 x 215 mm Cable length, marking/control unit 3 m Weight, marking unit 5 kg Weight, control unit 15 kg Mains voltage 115/230 VAC. 50/60 Hz, single-phase. Power consumption, FL2 model 450W Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Condition: used, DÜRR Type: DÜRR 1K adhesive application system Dürr 1K adhesive application system with drum pump, dispenser, and heated hose (approx. 5m). Technical machine description: Condition of the system: The drum pump, feed hoses, dispensing unit, etc., are contaminated with old adhesive and must be cleaned or replaced. The system has approximately 20 operating hours. The machine was used in a research facility. Year of manufacture: 2017 Air inlet pressure: Max. 6 bar Dimensions: Approx. 1.5 x 1 x 1.5 meters 1 adhesive control unit DÜRR (110017040) 1 single drum pump (110014004) Weight: approx. 300 kg Condition: used Scope of delivery: (See image) Dcedpfxszgckco Ak Aop (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Eos EOSINT P 380 Eos EOSINT plastic laser sintering system P380 The following items are included with the EOS P380 system: Build volume container Powder container Overflow container Cooler: Termo TEK thermochiller, type: 802-18644-3 Unpacking stamp Dcedpfx Akjzdywze Ajp Removal trolley 3DM 8-zone process chamber heater, 250°C Each zone can be set individually, homogeneous temperature field ± 1°C Kelvin 350mm x 350mm x 610mm Voltage 3/N/PE/ 400V AC Frequency 50 Hz Connected load 8 kW Fuse rating 32 A MAX. laser power 100 W Laser class (open) 4 Laser class (closed) 1 Weight 850 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Desktop Metal Desktop Metal 3D Printer Complete System 3D Metal Printer Studio System from Desktop Metal Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes a 3D printer, debinder, and furnace. Manufacturer: Desktop Metal Model: Desktop Metal Studio System Operating condition: Used (Good) Year of manufacture: 2019 Includes: Bound Metal Deposition (BMD) technology Features: Printed materials: Metal Technology: FDM Application: Industrial Other features: Office X-axis travel: 30 cm (12 in) Y-axis travel: 20 cm (8 in) Z-axis travel: 20 cm (8 in) Description: In contrast to laser-based systems that selectively melt metal powder, the printer extrudes bound metal rods – similar to an FDM printer. This eliminates the safety requirements often associated with 3D metal printing, and enables new features such as the use of closed-cell fillings for lightweight strength. Desktop Metal Studio Debinder (Delamination machine) Fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (storage) Description: The debinder prepares green parts by dissolving the primary binder for sintering. With a low-emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling mean that no refilling is required between cycles. Desktop Metal Studio Sinter Furnace Hybrid technology (microwave & conventional heating elements) Build volume: 305x205x205 mm Carbon housing Dodpfxjzd Tlle Ak Aecp Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Function: Sintering Configuration: Chamber Heat source: Gas Other features: High temperature, automatic Maximum temperature: 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles, tailored to each design and material, ensure uniform heating and cooling without the residual stresses that occur in laser-based systems. Condition: used Scope of delivery: (See image) (Changes and errors in technical data, information is subject to change!) We will be happy to answer any further questions you may have by telephone.