Used Stone for sale (1,006)

Condition: as good as new (ex-display), Demonstration unit with 7 operating hours immediately available (ex works Neckartailfingen) Shredder MRZ 830 Commodity code: 84659600 Year of manufacture: 2023 Infeed opening 800x1000 mm Motor: 22 kW; 400 V - 50 Hz - 3 phase Blades: multiple-rotation hydraulically actuated slide Screen size selectable (10 - 40 mm) Weight approx. 1,600 kg Dimensions (l x w x h) approx. 2290 x 1420 x 1750 mm Turbo coupling Standard equipment includes: - automatic star/delta start - fast hydraulics - auto. OFF when rotor is idling - speed 70-90 rpm for high throughput - cycle control to avoid idle times - performance-enhancing step control of the hydraulic slide - Pertinax guides for hydraulic slide - vibration-dampening machine feet Ledpfsv Sqrpjx Akqshn - CE compliant The shredder is designed for shredding natural wood, chipboard, and MDF, as well as other materials after testing and approval by the manufacturer. Included: - Shredder raised by 30 cm (preparation for conveyor belt) Additional shredder options: - Articulating conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2000 mm + - 100 mm - Overband magnet + €6,780 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Requirements for the raw material: - The moisture content (as received) must be below 30%, - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: used, mileage: 588,700 km, power: 294 kW (399.73 HP), first registration: 03/2010, fuel type: diesel, empty load weight: 11,120 kg, maximum load weight: 14,880 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,800 mm, brakes: engine braking, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: steel-air, number of seats: 2, loading space length: 6,900 mm, loading space width: 2,480 mm, loading space height: 900 mm, Equipment: ABS, air conditioning, cabin, crane, cruise control, onboard computer, parking heater, power assisted steering, trailer coupling, * German vehicle * Complete maintenance booklet * 1st hand * Stone tongs available at extra cost * Third axle lift and steerable * Scania R400 with Atlas Tirre Euro 191 l crane * Crane length: 13.25m = 1100Kg * 11,15m = 1275Kg * 9,05m = 1650Kg * 7.15m = 2150KG * 5.25m = 3250Kg * 5 + 6 control circuit * Aluminum special floor * 6.90m long flatbed * 90cm high side walls Lhjdpfxsvhplye Akqjn * High seat * Hydraulic outriggers * Trailer coupling * Driver's cab with a sleeper couch * Multifunction steering wheel * Air conditioning * Auxiliary heating * Cruise control * Hands-free system * Electric windows * Electric mirrors * Heated mirrors Mirrors * Air suspension driver and front passenger seat * Radio-CD * Roof hatch * Working headlights * Suspension: leaf/air with lifting and lowering * GVW. 26,000 kg. * Payload 12530 kg. If new TÜV approval is required, we will be happy to provide you with a quote from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 27 h, one machine directly available *Prior sale expressly reserved *Round silo at extra charge Press can only be supplied with a system component such as a chipper, cutting mill, hammer mill, screw conveyor, conveyor belt with overbelt magnet or suction Hydraulic briquetting press for rectangular briquettes Type R - throughput up to maximum 500 kg / h * depending on the specific weight of material. Based on a bulk weight of 220 kg / m³. + 24h operation possible + Longevity + Low maintenance costs + Compact structure + High energy efficiency thanks to innovative hydraulics + 25 years of experience . * depending on the bulk weight of your raw material * based on a bulk weight of 200 kg per cubic meter Detailed information after a successful test with your material . Drive motor: 22 kW - IE 3 400 V / 50 Hz / 3 phases Oil cooler: 2.2 kW Agitator: 0.55 kW Screw: 1.5 kW . Hopper: 400x800mm Capacity of approx. 150 liters . Soft start for hydraulic motor Siemens PLC S7-1200 . Auto start and stop via a light barrier integrated in the feed hopper Up to 560 briquettes per hour . Specific pressing pressure: 1,700 kg / cm² Lhodpfx Asgbpm Tjkqsn Up to 300 bar pressing pressure Briquette format 150x60 mm Briquette length: 40 to 110 mm (adjustable) Dimensions: 2.9 x 2.0 x 2.1 m Weight: 3,800 kg. 600 liter hydraulic oil tank The control is designed for operation from + 10 degrees to +35 degrees . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 15% - Maximum chip length: 20 x 2 x 2 mm - Installation temperature: temperature-controlled room at at least + 8 ° C Otherwise, we recommend heating for an extra charge - The loading must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and / or increased wear can be the result.

Condition: good (used), Manufacturer: Hazemag Ljdpfjg Stzbox Akqjhn Type: SAP 4 Inlet Size: 650 x 450mm Electrical Motor: Included See PDF-file below for more detailed information.

Condition: new, Year of construction: 2025, machine/vehicle number: 421159679, Mobile jaw crusher on tracked chassis The VULCANO crusher is the most modern and compact machine in its category, weighing 25 tons and representing the latest generation. The feed hopper, with road-legal loading dimensions and the option to fold down the conveyor belt, enabling transport even on trailers, makes it versatile for transport and just as quick to set up. From arrival at the construction site to the moment the crushing process begins, only the time required for warm-up is needed. Equipped with state-of-the-art control and operating systems, it is simple and user-friendly, and also environmentally friendly. The HCS control system (Hydraulic Crushing System) actively supports the automatic operation of the machine, guaranteeing the highest profitability in terms of maintenance costs and productivity, making it unparalleled. The structural reinforcement between the frame and the crusher gives the machine the highest robustness against stresses. The special design of the supporting structure guarantees excellent access to all machine parts during maintenance operations. The GI CRUSHER VULCANO certainly offers convincing and unparalleled performance both in natural stone applications and in recycling, as well as for rental purposes. Production capacity: approx. 190 tons/hour Lhjdohd I Sbspfx Akqjn Patented HCS system Proportional valve with "Load Sensing" for system optimization and a reduction in fuel consumption of approx. 30%. Optional pre-screening Gap size hydraulically adjustable, even during the crushing process Fast locking system with wedges and folding cylinders Discharge height 2750 mm Dust extraction Tank pump Magnet separator Warranty: 1 year or up to a maximum number of operating hours from the start of operation of the plant. Technical data: Jaw crusher 830 x 580 mm Crushing gap from 30 to 160 mm Feed hopper 3.5 m³ - 1800 x 2970 mm Grizzly feeder 770 x 2750 mm Main conveyor belt 800 x 8700 mm 4-cylinder diesel engine with constant speed 82 HP / 60 kW, emission stage V Control panel Tracked chassis 400 x 2920 mm Weight: kg Transport length 10850 mm or 9170 mm with folding discharge belt Transport width: 2520 mm Transport height 3100 mm Further information: Application: Construction, Drive: Crawler

Condition: as good as new (ex-display), Year of construction: 2024, The ideal machine for shredding cables, including optimized cutting geometry, approximately 9 operating hours. Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Knives: 14 pieces, 40x40mm, multi-rotatable, Rotor diameter: 260 mm, Control: Omron PLC, Cutting chamber opening 600 x 800 mm, Hopper volume approx. 0.6 m³, Hydraulically actuated slide Screen size optional (15 - 40mm) Extraction nozzle Ø 160 mm Weight approx. 1,300 kg Lhsdpfx Akogmfa Ajqsn Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm The following options are available at an additional cost: - Double knife row + €1,990 net (28 instead of 14) - Surcharge for 4-sided segment base + €2,170 net (prevents the slide from jamming. Recommended when shredding plastics, paper, veneer with a thickness of less than 3 mm). - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Inclined conveyor belt (discharge height approx. 220 cm) + €8,770 net - Over-band magnet + €6,980 net - Control for conveyor belt and over-band magnet + €2,750 net (Start and stop synchronized with the shredder) Bea9ia3l27 Requirements for the raw material: - Mineral impurities such as sand, stones, etc. lead to increased wear. We would be happy to offer a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight forwarder and we will document the test with photos and videos.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 75 kW (101.97 HP), Jaw crusher for stone & ore crushing in quarry and mining fields Model: PE600X900 Max input size: 500mm Capacity: 80-135 t/h Motor: 75KW Weight: 15T Besides this models, we also have the other models like PE900X1200, PE500X750, PE250X400, PE400X600, etc, and we also have impact crusher, cone crusher, hammer crusher, vsi crusher, more important we can also provide complete stone crushing screening plant with capacity 30-1000 t/h, welcome to contact us for more details if you want a different model or the other type of crushing machine. Lhedpfxeq H Shco Akqjn You can leave us a message if you need a different model or a different type of crusher.

Condition: new, functionality: fully functional, power: 260 kW (353.50 HP), fuel type: electric, color: dark red, overall weight: 42,000 kg, operation weight: 42,000 kg, chain condition: 100 %, axle configuration: 3 axles, Year of construction: 2026, The construction industry is moving away from the "build-demolish-dump" cycle and toward Urban Mining. At the heart of this shift is the Mobile Stone Crusher, a powerhouse designed to turn piles of jagged concrete and brick into high-quality recycled aggregate right on the job site. --- ## 1. The Engineering Logic: From Waste to Wealth In a traditional setup, demolition waste is hauled to a landfill—a process that is expensive, carbon-heavy, and wasteful. A mobile crusher flips the script. It brings the factory to the waste. By processing materials on-site, contractors save on transport costs and produce "Road Base" or "Sub-base" materials immediately. ### Key Components of a Mobile C&D Plant: * Vibrating Feeder: Uses a "Grizzly" bar system to pre-screen fines (dirt/sand) so the crusher only works on the big stuff. * Crushing Unit: Usually a Jaw Crusher (for primary compression) or an Impact Crusher (for better grain shape and higher reduction ratios). * Magnetic Separator: This is the "secret sauce" for C&D waste. It pulls out rebar and scrap metal that would otherwise contaminate the recycled aggregate. * Discharge Conveyor: Transports the finished product to a stockpile. --- ## 2. Technical Specifications & Performance When evaluating these machines, "Throughput" ($TPH$ or Tons Per Hour) is the metric that matters. For C&D recycling, the machine must handle unpredictable feed sizes and varied material hardness. ### Typical Technical Specifications Table | Feature | Specification Range | Why it matters | | --- | --- | --- | | Throughput | 100 – 500 $t/h$ | Determines project timeline efficiency. | | Max Feed Size | 500mm – 1,100mm | Dictates if you need a hydraulic breaker first. | | Power Source | Diesel-Electric or Hydraulic | Dual power (Electric) is better for urban noise/emissions. | | Crusher Type | Jaw or Impact | Impactors provide a more "cubic" final product. | | Mobility | Crawler Tracks | Essential for moving over uneven rubble piles. | --- ## 3. The "C&D" Specialization Recycling construction waste isn't just about "breaking rocks." It’s about cleaning material. Modern mobile units are equipped with: 1. Over-belt Magnets: Specifically designed to lift heavy steel reinforcement bars (rebar) out of the crushed concrete flow. 2. Dust Suppression: High-pressure misting systems to keep neighbors happy and workers healthy in tight urban environments. Lhjdpjq I Nviefx Akqjn 3. Active Pre-screening: Removing sticky soil or asphalt fines before they enter the crushing chamber to prevent "plugging." > The Insight: Using a mobile crusher can reduce project carbon footprints by up to 40% simply by eliminating the "truck-in, truck-out" logistics of aggregate management. --- ## 4. Maintenance and Longevity Because C&D waste is highly abrasive (and often contains "surprises" like wood or plastic), maintenance is non-negotiable. * Jaw Plates: Must be flipped or replaced regularly to maintain the "Closed Side Setting" (CSS), which determines the size of your output. * Blow Bars: In impact crushers, these are the high-wear items that take the brunt of the force. --- Would you like me to compare the cost-effectiveness of Jaw vs. Impact crushers for a specific type of demolition project, or perhaps look into the environmental regulations regarding on-site crushing?

Condition: new, Year of construction: 2026, A superfine ball mill is a type of milling machine that is used to grind materials into very fine particles. This type of ball mill has some distinctive features that make it especially suitable for processing even the hardest materials with low contamination and minimal wear. It is commonly used in various industries, including pharmaceuticals, minerals, pigments, and chemicals, for producing micro powder or nanoparticles. Here are some key features and considerations for a superfine ball mill for micro powder: 1. High Grinding Efficiency: Superfine ball mills are designed to achieve high grinding efficiency by utilizing grinding media with a relatively small size, leading to a large surface area for grinding. 2. Precision Control: These mills often come with advanced control systems to regulate parameters like rotation speed, temperature, and grinding time, allowing precise control over the particle size distribution. 3. Specialized Design: The mill is typically designed with features to minimize contamination, such as using materials resistant to wear and corrosion. Some mills also have cooling systems to prevent overheating during the milling process. Lhsdpsq Nf Uwjfx Akqon 4. Variety of Materials: Superfine ball mills can handle a wide range of materials, including both brittle and fibrous substances. They are often used for milling hard materials that require fine grinding, such as ceramics, minerals, or pigments. 5. Size Reduction to Micro or Nano Level: The primary goal of a superfine ball mill is to reduce particle size to the micro or even nano level. This is achieved by the intense grinding action that occurs within the mill. 6. Classifier System: Some superfine ball mills incorporate a classifier system to control the particle size distribution more precisely. This allows for the separation of fine particles from coarser ones during the milling process. 7. Batch or Continuous Operation: Depending on the specific design, these mills can operate in either batch or continuous mode, offering flexibility based on the production requirements. 8. Safety Measures: Safety features may be included, such as monitoring and control systems to prevent overloading, overheating, or other potential issues during operation. When selecting a superfine ball mill for micro powder production, it's important to consider the specific requirements of your application, the characteristics of the materials you're working with, and the desired final particle size distribution. Always follow the manufacturer's guidelines for operation, maintenance, and safety to ensure optimal performance and longevity of the equipment.

Condition: reconditioned (used), Year of construction: 2006, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, temperature: 300 °C, inner dimension height: 135 mm, total length: 900 mm, total width: 1,350 mm, total height: 2,100 mm, overall weight: 450 kg, number of chambers: 4, number of shelf rows: 4, actuation type: electric, fuel type: electric, year of last overhaul: 2025, This universal and multifunctional oven enables the perfect baking of a wide range of products. The Condo combines the capabilities of a large artisan oven with high mobility and a small footprint. Key features of the device: Consistently excellent baking results: bread with excellent quality and taste, and a crispy crust. Heating in the upper and lower zones is regulated separately for each chamber, ensuring the best baking results. Fast heating process. Separate control systems and humidification devices for each baking chamber, allowing for the simultaneous baking of a wide range of products. Ljdpfx Akjtvnbneqehn Intense steam delivery and an excellent crust thanks to a tightly sealed, high-performance steam generator. Guaranteed baking results thanks to adjustable steam extraction; the steam flap is electrically controlled. The temperature in the baking chamber does not drop because the humidification device is a separate module with its own heating system. The bread can be described as "stone-baked bread" because the baking chambers are lined with stone plates. Good lighting in the baking chamber; the lighting elements are easily accessible. Technical data: 4 chambers for 600x800 trays, or 8 chambers for 400x600 trays. Steam generator on each level. Oven dimensions: 900x1210x1230 mm. Steamer for 6 trays of 400x600 mm. Chamber height – 135 mm.

Year of construction: 2026, condition: new, functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, DGUV certified until: 08/2027, machine/vehicle number: 2026, Grain mill grinding turbine Lhsdpfxofxk Tqs Akqen Stone mill for grain, pulses and spices Table machine wood Corundum ceramic grinding stone Output: approx. 200g / minute Grinding degree: Infinitely variable from very fine to coarse Hopper capacity approx. 1.3 kg of grain Connection 220V, 600 watts Dimensions: 208 x 242 x 380 mm, WxDxH NEW machine exhibition / demonstration machine with warranty Visit our Milbrandt outlet with a show bakery and many bakery machines and devices!

Condition: new, Year of construction: 2026, Machine manufacturing time: approx. 3.5 months Very robust machine with high pressing force - also suitable for producing marketable briquette quality, depending on the material. The large-sized pressing cylinder and the 65 mm briquette make this possible. Lhjdpfxjffh Ate Akqjn Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to errors + 25 years of experience, continuous development and know-how + Several thousand machines in operation with satisfied customers + Good price-performance ratio Options: Additional cost for cooling unit: €3,995 net (can also be retrofitted later) * cools the pressing jaws (important for operation of 3.5 hours or more) and the hydraulic oil * Cooling unit recommended for regular operation of more than 3.5 hours at a time. Large pre-compression chamber: €1,975 net Recommended for lightweight raw materials such as wood shavings Commodity code: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Briquette stroke max.: 50 mm Briquette stroke opt.: 50 mm Performance (material-dependent): up to 110 kg/h* approx. 87 kg/h in the last test. *depending on the bulk density *based on a bulk density of 200 kg per cubic meter. Motor power: 5.5 kW 400 volts / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo volume: approx. 0.7 cubic meters Pump: 37 liters Hydraulic pre-compressor Option: Cooling of pressing jaws: yes, with special accessories for coolable pressing jaws Cooling of the pressing jaws via water tank (to be provided on site) Option: Cooling of hydraulic oil: yes Option: Level monitoring: yes Option: Log briquettes: yes (material-dependent) CE compliant Requirements for the raw material: - The moisture content (oven-dry) must be between a minimum of 6% and a maximum of 18% - Chip length maximum 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - The feed material must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear can result.

Condition: new, Year of construction: 2026, functionality: fully functional, number of drawers: 12, warranty duration: 12 months, The subject of sale is a warehouse for storing glass panes (321 cm x 255 cm) in boxes (12 x 2500 kg): glass, quartz sinters, polycarbonate, furniture boards, stone or other board materials. Lhodof Sqf Uopfx Akqsn The magazine is in the form of sliding, slightly inclined drawers. Thanks to it, you can save up to 75% of space, because all the drawers are parallel to each other and separated by only 10 millimeters. We offer various dimensions and capacity versions, while after consultation, we are also able to produce a warehouse with various parameters, taking into account your individual conditions and wishes. The magazine is especially recommended for glass, stone, furniture and advertising companies, which care about the effective use of their space.

Condition: used, mileage: 324,956 km, power: 213 kW (289.60 HP), first registration: 05/2015, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: yellow, gearing type: automatic, emission class: euro6, loading space volume: 12 m³, loading space length: 5,200 mm, loading space width: 2,480 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, crane, * Sun visor * ABS Lhjdpfx Ajz Dlvmekqsn * ASR * ESP * Radio * Rear view camera * Cruise control * Hill start assist * Electric windows * Electrically adjustable mirrors * Mirror heating * Sunroof * Driver's air suspension seat * Air intake at the top * Trailer coupling * 2-line air connection * Duomatik air connection * 12-speed * Suspension: leaf spring/air * Payload: 7895 * Continuous brake: engine brake ----Special body: Crane: Palfinger PK 13001-KB (Power Link Plus), maximum lifting capacity 5.46t, foldable, elevated platform, 3-fold hydraulic extension, fully hydraulic outriggers, engine start/stop, 6th + 7th control circuit for rotary servo and grapple operation. Read load chart: lifts 3.7m - 3.3t, 5.3m - 2.25t, 7.2m - 1.6t, 9.2m - 1.22t.----Body: Logemann construction materials tipper body, front wall raised, stone floor, 2-part side panels left + right with damper relief, foldable center section, Kinnegrip fasteners.----Very well-maintained TGM, already with facelift, German vehicle, 1 owner, technically and visually ready for immediate use. For sale only to commercial businesses. IN CASE OF EXPORT, ONLY THE NET PRICE IS TO BE PAID!!!!! ALL INFORMATION WITHOUT GUARANTEE, INCLUDING EQUIPMENT AND ACCESSORIES. Our general terms and conditions (see imprint) form the basis for all purchase contracts, invoices, proforma invoices, orders, and sales negotiations.

Condition: used, mileage: 1,001 km, first registration: 01/1999, empty load weight: 295 kg, color: green, driver cabin: other, gearing type: other, Year of construction: 1999, Vehicle location: Bovenden Lhsdpfxjzzbgxe Akqjn Stone grapple Kinshofer KM 613 - 0.40, year of manufacture 1999 Load capacity 0.4 m³, max. 200 bar. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, mileage: 431 km, power: 184 kW (250.17 HP), first registration: 03/2026, overall weight: 17,500 kg, fuel type: diesel, color: red, axle configuration: 2 axles, next inspection (TÜV): 03/2027, gearing type: automatic, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), parking heater, New M.A.N. TG3 17.5 to 4x4 all-wheel-drive special roll-off tipper with initial registration in 03/2026 Payload 9.3 tons, container lengths from approx. 4.0 meters to approx. 5.50 meters, wheelbase 4.50 m, all-wheel drive 4x4 with 3 differentials, single tires, high-roof design, automatic transmission, air conditioning, auxiliary heater, tire pressure monitoring system, trailer hitch, and more. With MAN manufacturer's warranty Equipment: Cab: TN double cab with 3 seats High-roof design Wheelbase 4,500 mm Single tires Engine: MAN D0836 LFLBN with 250 hp Euro 6 e Drive: 4x4 Differential lock in front and rear axles Unladen weight 8,135 kg Payload 9,365 kg with a gross vehicle weight of 17,500 kg Roll-off tipper: Hiab XR 10 S Container lengths from approx. 4.00 m to approx. 5.50 m Hydraulically extendable rear underrun protection Hydraulic internal locking Hook height 1.57 m Roll-off tipper control unit with cable extension 2 additional frame tipper supports 2-stage control for extending and retracting Transfer case MAN G102 with on-road and off-road gears Transfer case lock management electronically (VSM) MAN PowerMatic 08.13 OD automatic transmission Auxiliary drive OPN0L Medium Duty ISO 21308 Transmission function MAN Idle Speed Driving Driving program MAN TipMatic Efficiency Driving program MAN TipMatic Offroad Driving program MAN TipMatic Emergency Air conditioning Water auxiliary heater, 4 kW Trailer hitch, drawbar coupling Ringfeder Type RF40/G150B with air pressure connections Permissible gross train weight 28,000 kg Trailer load 16,845 kg Trailer load, center axle trailer 16,000 kg Front and rear axles leaf-sprung Front axle 9,000 kg as an external planetary axle, switchable, with differential lock Rear axle HP-1333, 13,000 kg, single tires on rear axle, with differential lock Axle ratio, i=6.00 Stabilizer for front and rear axles Lhsdpez D N Umefx Akqen Shock absorbers on front and rear axles Electronic braking system EBS High-performance engine brake MAN EVBec Hill start assist MAN EasyStart Drum brakes on front and rear axles ASR ESP ABS Emergency braking assistant EBA Front detection Tire pressure monitoring system (TPM) with tire temperature display Driver attention alert MAN AttentionGuard Preparation for alcohol interlock Cruise control Multi-function steering wheel 150 liter fuel tank Roof hatch Daytime running lights LED Rear lights LED Stone chip protection for front headlights Electrically adjustable and heated exterior mirrors Driver comfort seat package Premium air-suspended, co-driver comfort seat package Plus Driver comfort seat air-suspended with lumbar support and shoulder adjustment Comfort center seat air-suspended with integrated seat belt system, offset to the rear Co-driver comfort seat air-suspended New vehicle with initial registration in 03/2026 with MAN manufacturer's warranty Price NET, plus 19% VAT. We will be happy to provide you with attractive financing offers. All information without guarantee. Errors and prior sale excepted. Internal vehicle number: 2562

Condition: used, mileage: 10 km, power: 151 kW (205.30 HP), first registration: 10/2026, fuel type: diesel, color: silver, gearing type: automatic, emission class: euro6, number of seats: 5, total length: 6,836 mm, total width: 2,040 mm, total height: 2,590 mm, loading space width: 1,832 mm, loading space height: 1,861 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, * 5-seater double cab with partition * Exhaust system, EU6e (EC) * All-wheel drive 4x4 * 8-speed automatic transmission for 4x4 * 4-cylinder turbo diesel engine, 2.0 l / 130 kW (4V) BIT, common-rail base engine: TK1/TK4 * Start-stop system with brake energy recovery * Towing eye in the front Lhsdpjz Ed N Isfx Akqen * Trailer hitch, fixed * Fuel tank 75 l * Reinforced stabilization * Approved for 3.5t * Front axle, reinforced * 4 light alloy wheels 6 1/2 J x 17, with 1,200 kg load capacity, in black * AGM battery (520 A, 92 Ah) and generator operating voltage 12 V * Immobilizer, electronic * Electrical connection block and KFG with ABH programming * Air conditioning 'Climatronic' in the driver's cab * 2nd battery (AGM battery) with separation relay and battery monitoring * Daytime running lights with assistant driving lights and coming and leaving home function * LED main headlights with LED daytime running lights * LED interior lighting concept in the passenger/cargo compartment * Fog lights including cornering light * Lateral marker lights * Exterior mirrors, electrically adjustable, heated and foldable * Exterior mirrors left and right, convex, with integrated LED turn signal and wide-angle area * High roof, painted in vehicle color * Grab handles on the rear pillars * Rear wing doors with enlarged opening angle * Windshield wiper intermittent switch with light and rain sensor * Sliding door, right * Laminated windshield with heat-reflecting glazing, heated * Airbag for driver and front passenger, with front passenger airbag deactivation * Roof console with storage compartments, two 1-DIN slots and reading light * Sun visors, foldable and swiveling to the side * Electronic parking brake * Premium interior noise damping measures * Glove compartment with lockable flap, illuminated * Leather multifunction steering wheel, heated with Tiptronic * 12V socket, cup holders * Three-point automatic safety belts with height adjustment * 12V socket in the driver's cab (in the instrument panel) * Seat belt warning, E-contact in the seat belt buckle * 2 remote key fobs * Keyless Go with SAFELOCK * Auxiliary heater * Swiveling seat, left * Swiveling seat, right * Seat covers in fabric 'Toronto Grid' * Heated driver and front passenger seats, separately adjustable * Digital instrument cluster * Tire pressure monitoring system * USB Type-C data and charging ports with increased charging performance * 4 speakers: 2 tweeters, 2 woofers * Digital radio reception (DAB+) * MAN Media Van Navigation Business Package (12.9 inches) * MAN SmartLink * MAN Connect * Comfort telephony with LTE and wireless charging * With voice control * Hill start assist * Emergency braking assistant * ESP with electronic differential lock, anti-slip control (ASR) and ABS * Park steering assistant with parking assist including side protection * ACC Stop & Go * Traffic sign recognition * Rear view camera system with dynamic guide lines * High beam assistant 'Light Assist' * Attention and fatigue warning * Lane change assistant * Side wind assist * Blind spot detection on both sides and departure warning * Turning assistant * Emergency assistant (active lane keeping assistant and Emergency Assist and traffic jam assistant) * Intelligent speed assistant * With multifunction camera * Cruise Assist Plus * Child lock, electrically operated * Lashing points for securing cargo * MAN TGE Individual Performance Kit 200 hp * Stone chip protection (without CO2 optimization) * Distributor package driver assistance *

Condition: used, mileage: 10 km, power: 151 kW (205.30 HP), first registration: 09/2026, fuel type: diesel, color: grey, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 5,986 mm, total width: 2,040 mm, total height: 2,590 mm, loading space length: 3,201 mm, loading space width: 1,832 mm, loading space height: 1,961 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, * 18-inch TWIN-MONOTUBE-DESIGN rims, satin matte black * MAN TGE raised suspension * Hill start assist * Exhaust system, EU6e (EC) * Trailer coupling, fixed * One towing eye in the front * Airbag for driver and front passenger, with front passenger airbag deactivation * Roof console with storage compartments, two 1-DIN slots, and reading light * Sun visors, foldable and swiveling to the side * Exterior mirrors, electrically adjustable, heated, and foldable * Exterior mirror on the left, convex, with integrated LED turn signal and wide-angle view * Exterior mirror on the right, convex, with integrated LED turn signal and wide-angle view * All-wheel drive 4x4 * Emergency brake assist * Battery 520 A (92 Ah) * Rubber flooring in the cab * Electronic parking brake * AGM battery (520 A, 92 Ah) and generator * ESP with electronic differential lock, anti-slip regulation (ASR), and ABS * Stone chip protection (without CO2 optimization) * High roof, painted in vehicle color * Differential lock on the rear axle (manually switchable, mechanical) * Immobilizer, electronic * Park steering assistant with parking assistance incl. side protection * Grab handles at the rear pillars * USB Type-C data and charging ports with increased charging power * Daytime running lights with automatic driving lights and coming and leaving home function Lhjdpfx Asz Ed N Uekqen * Electrical connection block and KFG with ABH programming * Premium interior noise reduction measures * With UNECE CS&SU * 4-cylinder diesel engine 2.0L, assembly 03N.G * ACC Stop & Go * 8-speed automatic transmission for 4x4 * Glove compartment with lockable flap, illuminated * Rear wing doors without window cutouts * Air conditioning "Climatronic" in the cab * LED headlights with LED daytime running lights * LED interior lighting concept in the passenger/cargo area * Panel van * Child safety lock, electrically operated * Standard climate zones * Traffic sign recognition * Rear view camera system with dynamic guidelines * High beam assistant "Light Assist" * Leather multifunction steering wheel, heated with Tiptronic * Left-hand traffic * 4 speakers: 2 tweeters, 2 woofers * Country cluster "WLTP EU approval" * Digital instrument cluster * Attention and fatigue detection system * MAN SmartLink * 4-cylinder turbo diesel engine 2.0 l / 130 kW (4V) BIT, Common-Rail * Basic engine is: TK1/TK4 * Fog lights incl. cornering light * MAN Connect * MAN Media Van Navigation Business (12.9 inches) * 12V socket, cup holder * Tire pressure monitoring system * Standard wheelbase 3,640 mm * Three-point automatic seatbelts with height adjustment * Rear wing doors with increased opening angle * Heat-insulating glazing * 12V socket in the cab * Swivel seat left * Swivel seat right * Seatbelt warning, E-contact in the seatbelt buckle, driver and passenger seat * Seat covers in fabric "Toronto Grid" * Seat heating for driver and passenger seat, separately adjustable * Side marker lights * 2 remote control keys * Approval as 3.5t * Start-stop system with brake energy recovery * Lane change assistant * Engine start, standard * Side wind assistant * Windshield wiper interval control with light and rain sensor * LNFZ version with up to 3 seats * Keyless Go with SAFELOCK * Blind spot detection on both sides and departure warning * Turning assistant * Emergency assistant (active lane keeping assistant, emergency assist, and traffic jam assistant) * Preparation for alcohol interlock * Intelligent speed assistant * With multifunction camera * Digi

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 1407, total width: 2,500 mm, total length: 2,710 mm, total height: 3,000 mm, overall weight: 10,000 kg, maximum load weight: 330 kg, loading space volume: 3.3 m³, air pressure: 7 bar, Tonello 330 HS Industrial Garment Washing & Dyeing Machine (re-controlled 2014) Large-Capacity 3300 L Industrial Garment Wet-Processing Machine with B&R Touchscreen Control The Tonello 330 HS is a large-capacity industrial garment washing and wet-processing machine manufactured by Tonello S.r.l. (Sarcedo, Italy), the leading garment-finishing technology brand. The 330 class (3300 L drum) handles industrial washing, dyeing, softening, bleaching and stone-wash / enzyme effects on denim and garments at production scale. This unit (MASI in-house reference "Pesumasin No 3") was in professional denim-finishing production until factory shutdown. The machine body dates from 2000 and the complete electrical control system was rebuilt in 2014 with a new Tonello / B&R panel. Technical Specifications • Manufacturer: Tonello S.r.l. (Italy) • Model: G1 330 HS • Serial / Matricola: 1407 • Year: machine 2000 / electrical control rebuilt 2014 • Basket / Drum Volume: 3300 L • Power Supply: 380–400 V, 3-phase + GND, 50 Hz • Installed Power: 27 kW (machine plate) / 14 kW (2014 control plate) • Air Pressure: 7 bar · Max Steam Pressure: 3 bar · Hydraulic Pressure: 10 bar • Weight: 10,000 kg • Supply Cable: 25 mm² • Country of Manufacture: Italy Key Features • Large 3300 L stainless drum for high-capacity garment wet processing • B&R Power Panel 300 touchscreen HMI (rebuilt 2014) with programmable cycles • Yaskawa Varispeed 616G5 variable-frequency drum drive • Mettler Toledo weighing controller and Siemens Sitrans flow metering • Automatic chemical dosing system • Steam, water, air and hydraulic services • Front loading door with sight glass Includes • Tonello 330 HS washing machine with stainless drum • B&R touchscreen control cabinet and pushbutton console • Yaskawa VFD and PLC electrical cabinet • Chemical dosing system, pumps and instrumentation Applications • Industrial denim and garment washing • Garment dyeing and over-dyeing • Softening, bleaching, enzyme and stone-wash effects • High-volume garment wet processing Condition • Working — main machine functional (per factory records) Lodpfx Akezmt S Dsqshn • Previously in professional denim-finishing production (MASI "Pesumasin No 3") • Machine from 2000 with 2014 electrical-control rebuild • Typical wear/dust from a wet-processing environment • Available for inspection under working conditions before dismantling Location Valga, Estonia Dismantling & Transport Buyer responsible for dismantling, loading, transportation, and all related costs. Professional rigging required (heavy industrial machine, ~10 t). Sales Terms Sold as-is, where-is, without warranty. Part of the MASI Jeans factory liquidation. Part of the Tonello industrial laundry line (available individually or as a complete line).

Condition: reconditioned (used), functionality: fully functional, overall weight: 2,200 kg, fuel type: diesel, maximum load weight: 500 kg, empty load weight: 1,380 kg, fuel: diesel, loading space volume: 0.6 m³, Year of construction: 2014, operating hours: 179 h, Equipment: all wheel drive, second-hand vehicle warranty, HAKO CITYMASTER 600 Multifunctional 4x4 Municipal Street Sweeper (2014 Model) – Excellent Condition INSTALLED EQUIPMENT: Dual-brush sweeping system – NEW hard brushes with added wire bristles are ideal for removing dirt from public roads, parking lots, and pathways. Hydraulic controls inside the cab allow for working width adjustment between 1,380 mm and 1,800 mm, while the spray system binds loose dirt and prevents it from becoming airborne. Multifunctional hopper – A versatile hopper with a 600-liter usable capacity, made from a corrosion-resistant aluminum alloy (resistant to water and road salt), suitable for various tasks such as collecting sweeping debris, grass clippings, or leaves. The hopper can be filled to its maximum capacity. Emptying is effortless thanks to hydraulic lifts that raise it to the desired height. Manual suction hose – A Ø125 mm suction hose mounted on a movable boom functions like a vacuum cleaner, making it ideal for collecting leaves or smaller waste items such as packaging and bottles. Built-in high-pressure washer – Located at the rear of the machine, this washer features a 10-meter hose, enabling high-pressure cleaning of various surfaces—from asphalt and paving stones to walls and street furniture. Work and spot lighting – Full road lighting enabling travel on public roads, complemented by optional work-area lighting to improve working comfort during twilight or in conditions of poor visibility. Windshield wiper with washer, Bluetooth/USB radio, warning beacon, horn, operator seat with mechanical height adjustment TECHNICAL DATA: Model: Citymaster 600 Year of manufacture: 2014 Sweeping module operating hours: 57 h Total operating hours: 179 h Working width: 1380 mm – 1880 mm Debris hopper capacity: 600 l / 500 kg Fresh water tank capacity: 150 l Curb weight: 1380 kg Gross vehicle weight: 2200 kg DRIVE: Engine: Yanmar 3TNV88C-ZMHW – 1642 cc – Diesel Fuel tank (l): 41 Number of cylinders: 3 Power: 24.2 kW (32.91 hp) Engine speed: 2630 rpm (max) / 1900 rpm (Eco) Torque: 104.8 Nm Driving speed (forward/reverse): 25 km/h / 10 km/h Gradeability: 25% Hydraulic oil tank capacity: 35 l Hydraulic oil type: HVLP 46 DIMENSIONS: Length: 3899 mm Width: 1090 mm Width with brushes in transport position: 1380 mm Height: 2269 mm INCLUDED: Refurbished suction nozzle with new rubber skirts and a new suction hose leading to the hopper Ledpfx Akez Ia Ufsqjhn NEW 4m suction hose for the handheld vacuum (Ø125 mm) NEW side brushes (PPL 1.8 + wire mix) (2x) NEW KENDA 23X8.5-12 10PR TL E K500 Super Turf tires (4x) NEW 12V 71Ah starter battery NEW air, fuel, and oil filters, plus an oil change service Pressure gun + 500mm lance + power nozzle + 10m high-pressure hose Windshield wiper and washer, Bluetooth/USB radio, warning beacon, horn, operator seat with mechanical height adjustment We can provide a full gallery of 58 photos upon request.

Condition: used, Euro Classic range – Inox finish Electrical power 400 V three-phase Power supply 3N~ 50/60 Hz Maximum power 9.5 kW Average hourly consumption 4.5 kW/h Capacity 9 pizzas Ø 30 cm Tray capacity 2 x 600 x 400 mm Chamber 930 x 930 x 170 mm Maximum temperature 450 °C Lhedpszx Dztefx Akqen Independent digital regulation for dome / hearth Dome, hearth, walls, and bottom made of refractory material Heating elements inserted into the stone Counterbalanced door with lower swing Panoramic glass window Protected internal halogen lighting External dimensions 1320 x 1260 x 400 mm Net weight 200 kg Stackable up to 3 chambers General description The Italforni Euro Classic EC9-I professional electric pizza oven features a 930 x 930 x 170 mm chamber that can bake up to 9 pizzas with a diameter of 30 cm simultaneously or accommodate 2 trays of 600 x 400 mm. It reaches 450 °C and benefits from independent electronic digital regulation for the dome and the hearth. What makes this model stand out Its chamber is entirely made of high-density refractory material: dome, hearth, side walls, and bottom. This design promotes insulation, thermal homogeneity, and temperature recovery, as advertised for this model. The armored “hy•pe” heating elements are inserted directly into the stone to limit energy loss. Key advantages Capacity of 9 pizzas Ø 30 cm Independent dome / hearth regulation Entirely refractory chamber Maximum temperature of 450 °C Counterbalanced door with panoramic window Protected internal halogen lighting Stackable up to 3 chambers, and a smoke extraction module is possible.

Year of construction: 2009, condition: used, GMM rotating head bridge saw with 5 working axes. Lsdjzz Nukepfx Akqshn Automatic rotating support, 0-90°. Automatic rotating head, 0-370°. Maximum blade diameter: 625 mm. Saw motor power: 23.5 kW. Tilting table with hydraulic tilt: 3500 mm x 2000 mm. Camera. 15″ Touchscreen. Laser.

Year of construction: 2010, operating hours: 7,546 h, condition: good (used), functionality: fully functional, machine/vehicle number: 04810, We are offering this well-maintained COMANDULLI OMEGA 100 edge grinding machine for round edges, manufactured in 2010. Manufacturer: COMANDULLI Model: OMEGA 100 Year of manufacture: 2010 Condition: good Category ID: 430 Machine type: Edge grinding machine for round edges Configuration: Belt running direction: left to right Pre-grinding support for end faces Thickness gauge 1+1 automatic pre-grinding supports 45° Lhedszyuckepfx Akqen 8 end face grinding supports for straight and round edges 2 upper and 2 lower chamfering supports Swiveling device for chamfering supports for easy processing of pencil edges Finishing grinding support 2 roller tables, each 2m long The machine is currently in operation in Australia; the price includes transportation CIF to a European port of your choice. If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2005, condition: used, Breton 5-axis milling machine, complete with camera, conveyor belts, and infeed roller table. Lhodjz I D Atspfx Akqjn

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 2 h, lifting height: 7,000 mm, fuel type: electric, gearing type: automatic, tire condition: 100 %, Equipment: fork extension, STILL FM-4W 25 Four-Way Reach Truck – in almost new condition For sale is a STILL FM-4W 25 four-way reach truck, manufactured in 2025, with only approximately 2 operating hours. Consequently, the truck is in almost new condition. Thanks to its four-way technology, it is particularly suitable for the transport and storage of long materials, panels, profiles and other bulky materials. Technical data * Manufacturer: STILL * Model: FM-4W 25 * Year of manufacture: 2025 * Operating hours: approx. 2 h * Serial/Vehicle number: RSB36B 50031 * Load capacity: 2,500 kg * Lifting height: approx. 7,050 mm * Mast height retracted: approx. 3,190 mm * Operator protective roof: approx. 2,155–2,215 mm * 48 V electric drive * Battery weight: approx. 933 kg * Vehicle weight without battery: approx. 3,875 kg * Vehicle weight incl. battery: approx. 4,808 kg Special features Equipped with a Griptech FPN-25-RT fork adjustment and KOOI RG4-25 telescopic forks. * Load capacity attachment: 2,500 kg at a 600 mm load center * Base length telescopic forks: approx. 1,350 mm Lsdpfx Akoz Ihmceqehn * Extension: approx. 1,050 mm * Total length extended: approx. 2,400 mm * Hydraulic fork adjustment * Four-way driving function for particularly flexible material transport The FM-4W 25 is particularly interesting for stone/natural stone businesses, metal trading companies, wood trading companies, building material trading companies and warehouses with long materials. Due to the year of manufacture (2025) and the extremely low number of operating hours, this is an opportunity to acquire a virtually unused STILL four-way reach truck. Inspection and test drive possible by appointment. Sales to businesses preferred. Further pictures and technical documents can be provided upon request.