Used Storage Vessel for sale (8,797)

Condition: used, tank capacity: 130,000 l, GENERAL Equipment: Ventilation intake/exhaust Design: upright Speed: 950 / 1145 RPM Internal diameter: 3,500 mm Total height: 15,860 mm Insulation: available Power output: 5.5 / 6.3 kW Agitator: propeller Base design: support ring Location: external storage Nameplate: Volume: 130,000 liters Product-contact material: V2A 1.4301 (AISI304) Cylindrical height: 14,660 mm Previous application: food industry TANK Bottom: flat bottom with gradient INSULATION Jacket: hermetically welded EQUIPMENT Manhole/dome: in cylinder Outlet: available Ksdexqdbkspfx Agzsnf AGITATOR 1 Voltage: 380 Volt Agitator position: side-mounted on cylinder

Condition: used, tank capacity: 8,500 l, GENERAL Equipment: Crane lugs Design: upright Remarks: Residue from previous product present inside (tanks originate from the coffee industry); Outer diameter: 1,850 mm Inner diameter: 1,700 mm Total height: 5,850 mm Insulation: present Support type: feet Location: external storage Volume: 8,500 liters Product-contacting material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 3,540 mm Last use: coffee industry Knedpfxoxqda To Agzef TANK Number of support feet: 3 pcs INSULATION Insulation jacket: hermetically welded Insulation material: rock wool Insulation jacket material: stainless steel Insulation thickness: 50 mm EQUIPMENT Manhole / access: in top head (DN 400) Outlet: DN50 DIN 11851

Condition: used, tank capacity: 20,000 l, GENERAL Equipment: Venting/inlet, spray head, crane lugs Design: upright Remarks: 1 tank with a small dent in the cylinder; manhole approx. 340 x 440 mm Internal diameter: 2,500 mm Kedpsxqc Uiefx Agzjnf Total height: 6,750 mm Max. overpressure: 0.50 bar Agitator: agitator flange Support design: height-adjustable feet Location: Bremen Nameplate: Volume: 20,000 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 3,700 mm Last application: fruit juice industry TANK Specific gravity of medium: 1.37 (t/m³) Number of feet: 3 pcs EQUIPMENT Manhole / dome: in cylinder Outlet: pipe end approx. Ø 80mm Note: outlet end cut off MATERIAL SPECIFICATION Feet material: stainless steel AGITATOR 1 Agitator arrangement: side-mounted on cylinder

Year of construction: 2015, condition: used, tank capacity: 1,195 l, GENERAL Equipment: Level indicator (not guaranteed), spray head, lifting lugs Design: vertical Year of manufacture: 2015 External diameter: 1,200 mm Internal diameter: 1,000 mm Overall height: 2,340 mm Heating/Cooling: available Insulation: available Max. permissible operating temperature: 50 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 3.00 bar Mounting type: on feet Location: Bremen Technical documentation: Drawing, TÜV certificates, CE marking and declaration of conformity, operating manual Cylinder temperature control: Thermoplate Nameplate: Capacity: 1,195 litres Double jacket volume: 2.0 litres Double jacket material: V2A 1.4301 (AISI 304) Product contact material: V2A 1.4301 (AISI 304) Condition: unused Cylindrical height: 1,250 mm VESSEL Max. permissible operating temperature: 50 °C Number of feet: 3 pcs INSULATION Insulation jacket: hermetically welded Insulation material: mineral wool Insulation jacket material: stainless steel Knsdpfxsxqcp Ts Agzof Insulation thickness: 80 mm EQUIPMENT Manhole / Dome: in cylinder Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Internal surface: polished (high-gloss finish) Feet material: stainless steel

Condition: used, tank capacity: 30,000 l, GENERAL INFORMATION Equipment: Spray head Design: Horizontal Remarks: 2 loose bearing shells made of Fe (galvanized) each; 1 manhole approx. 350 x 445 mm in the front end for each; noticeable dents in the cylinder Internal diameter: 3,100 mm Total length: 5,000 mm Mounting type: Saddles Location: Bremen Volume: 30,000 liters Cylinder wall thickness: 3.0 mm Knedpfjxqcncox Agzef Product-contact material: V2A 1.4301 (AISI304) Condition: Used Cylindrical length: 3,700 mm EQUIPMENT Outlet: 65 mm TECHNICAL DATA / DIMENSIONS End wall thickness: 3.7 mm

Condition: used, tank capacity: 118,000 l, GENERAL Design: vertical Outer diameter: 4,700 mm Inner diameter: 4,410 mm Total height: 10,860 mm Insulation: present Max. overpressure: 0.99 bar Agitator: beam agitator Support type: skirt support Location: Kundl (Austria) Technical documentation: drawing Nameplate: Vacuum: 0.25 bar Capacity: 118,000 litres Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 6,500 mm Knodpfoxqb Twex Agzef TANK Ends: torispherical heads INSULATION Insulation jacket: riveted EQUIPMENT Manhole / dome: in shell, in top head Outlet: flange DN100 AGITATOR 1 Bottom bearing: Agitator arrangement: centrally mounted in top head

Condition: used, tank capacity: 60,000 l, GENERAL Equipment: Crane lugs Construction type: upright Remarks: Cylinder manhole NW 600; minor sheet cut-outs in the insulation jacket Outer diameter: 3,200 mm Inner diameter: 3,000 mm Total length: 12,300 mm Heating/cooling: available Insulation: available Max. permissible operating temperature: 250 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 1.5 bar Mounting type: feet Location: Bremen Technical documentation: drawing Nameplate: Vacuum: 0.2 bar Volume: 60,000 liters Jacket volume: 105.0 liters Wall thickness (cylinder): 5 mm Product-contact material: V2A 1.4541 (AISI321) Condition: used Cylindrical height: 9,000 mm Last application: rapeseed oil TANK Max. permissible operating temperature: 200 °C Number of feet: 4 units HEATING/COOLING JACKET Bottom temperature control: half-pipe coil INSULATION Insulation jacket: bolted Knjdpfoxqb Rvsx Agzof Insulation material: mineral wool Insulation jacket material: aluminium EQUIPMENT Manhole / access: on cylinder, top head, top head (DN 600) Outlet: flange DN80 Note: dents on insulation jacket, manhole cover plated MATERIAL SPECIFICATIONS Jacket system material: V2A 1.4301 (AISI304) Feet material: steel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 10 mm Top wall thickness: 7 mm

Condition: used, Year of construction: 2010, tank capacity: 10,000 l, GENERAL Design: vertical Year of manufacture: 2010 Notes: Tank designed for LNG filling station but never put into operation; inside the tank, a tube bundle is installed over the flange, which can be used for temperature control; 2 steel transport saddles (supports) are included; a section of insulation and the insulation jacket are missing from the top part of the cylinder; External diameter: 1,850 mm Knsdpfx Aexqb Inegzjf Total width: 2,300 mm Overall height: 7,700 mm Heating/Cooling: available Insulation: available Max. overpressure: 18.0 bar Mounting type: legs Location: Bremen Technical documentation: drawing, various documents, operating manual Nameplate: Volume: 10,000 liters Product-contact material: V2A 1.4301 (AISI 304) Condition: unused Cylindrical height: 5,239 mm VESSEL Max. permitted operating temperature: 50 °C Number of legs: 3 HEATING/COOLING JACKET Internal temperature control: full-tube coil INSULATION Insulation jacket: bolted Insulation jacket material: stainless steel EQUIPMENT Note: slight residue, pressure marks on the cylinder MATERIAL SPECIFICATIONS Leg material: steel

Condition: used, Year of construction: 2014, tank capacity: 25,000 l, GENERAL Design: horizontal Year of manufacture: 2014 Notes: Product-contacting material: 1.4402 (Aisi 316L); Frame, Fe (painted); technical description available; manway diameter 500 mm; complete technical documentation can be purchased from the manufacturer at an extra charge Total width: 2,550 mm Total height: 2,900 mm Total length: 6,060 mm Kedpfexqb Dvex Agzsnf Heating/cooling: available Insulation: available Max. permissible operating overpressure: 3.0 bar Max. overpressure: 3.0 bar Mounting type: frame Location: Bremen Technical documentation: acceptance certificate Nameplate: Volume: 25,000 litres Product-contacting material: V4A 1.4402 (AISI316) Condition: used INSULATION Insulation material: PU foam Insulation thickness: 100 mm EQUIPMENT Manway / Dome: on the tank Outlet: available

Condition: used, tank capacity: 70,300 l, GENERAL Equipment: Crane lugs Design: vertical Remarks: Exact dimensions may vary slightly, a tank with agitator can be supplied at an additional cost Outer diameter: 3,500 mm Knodpexqb Dpjfx Agzsf Inner diameter: 3,494 mm Overall height: 9,000 mm Max. overpressure: 2.0 bar Support type: Height-adjustable feet Location: Outdoor storage 89340 Leipheim Technical documentation: Drawing, TÜV certificates, various documents Nameplate: Volume: 70,300 liters Cylinder wall thickness: 3 mm Product-contacting material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 6,350 mm Previous use: Brewery EQUIPMENT Manhole / Dome: in cylinder (approx. 350 x 450 mm) Outlet: DN80 DIN 11851 TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5 mm AGITATOR 1 Agitator arrangement: mounted laterally on cylinder Top wall thickness: 4 mm

Condition: used, tank capacity: 36,000 l, GENERAL INFORMATION Design: horizontal Remarks: 1 manhole approx. 320 x 420 mm located on the front end; total length and total height according to drawing; tanks were professionally cleaned and overhauled by the manufacturer in 2024; brand-new drain valves, sampling valves, and manhole gaskets have been installed. Internal diameter: 3,080 mm Total height: 3,600 mm Total length: 5,500 mm Support type: height-adjustable feet Location: outdoor storage Technical documentation: drawing Volume: 36,000 liters Knedjxqb A Sepfx Agzjf Cylinder wall thickness: 3 mm Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical length: 4,200 mm Previous application: wine storage TANK Number of feet: 6 pcs EQUIPMENT Outlet: 100 mm MATERIAL SPECIFICATION External surface: marbled Feet material: stainless steel TECHNICAL DATA / DIMENSIONS Head wall thickness: 5 mm

Condition: used, tank capacity: 24,000 l, GENERAL Design: upright Notes: 1 manway approx. 320 x 420 mm in the cylinder; total height as per drawing; tanks professionally cleaned and overhauled by the manufacturer in 2024; brand-new outlet valves, sampling valves, and manway gaskets have been installed. Internal diameter: 3,450 mm Total height: 3,650 mm Base design: feet adjustable in height Location: Outdoor storage 89340 Leipheim Technical documents: drawing Volume: 24,000 liters Cylinder wall thickness: 2.5 mm Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,650 mm Previous use: wine storage TANK Number of feet: 6 pcs EQUIPMENT Manway / Dome: in cylinder Outlet: 100 mm Kedpfexqb A Eex Agzsnf MATERIAL QUALITY External surface: marbled Feet material: stainless steel TECHNICAL DATA / DIMENSIONS Bottom plate thickness: 4 mm Top plate thickness: 3.5 mm

Condition: used, tank capacity: 67,000 l, GENERAL Equipment: Crane lugs Design: upright Remarks: Total height estimated according to drawing (slight deviations possible); manhole in cylinder DN 600; test pressure: 1 bar Internal diameter: 3,000 mm Total height: 11,200 mm Knsdpfxoxqb Are Agzef Other: wall thickness: 10/5/6 mm Base type: legs Location: outdoor storage Technical documents: drawing Volume: 67,000 liters Cylinder wall thickness: 5 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 8,800 mm Last application: solvents VESSEL Ends: torispherical heads Number of legs: 4 pcs EQUIPMENT Manway / dome: in cylinder, in top head (DN 600) Outlet: 80 mm TECHNICAL DATA / DIMENSIONS Bottom head wall thickness: 10 mm Top head wall thickness: 6 mm

Condition: used, tank capacity: 48,100 l, GENERAL Equipment: Crane lugs Design: upright Notes: Cylinder manhole diameter: 600 mm; Internal diameter: 2,988 mm Knedpfx Aexqb Alogzjf Total height: 7,560 mm Max. overpressure: 1.0 bar Support type: feet Location: 6250 Kundl, Austria Technical documentation: drawing, various documents Nameplate: Vacuum: 0.25 bar Capacity: 48,100 liters Cylinder wall thickness: 6 mm Product contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 6,000 mm Last application: solvents VESSEL Max. permissible operating temperature: 100 °C Heads: dished ends Number of feet: 4 pcs EQUIPMENT Manhole/Dome: in the cylinder, in the top head (DN 600) Outlet: flange DN100 TECHNICAL DATA / DIMENSIONS Bottom head wall thickness: 8 mm Top head wall thickness: 10 mm

Condition: used, tank capacity: 25,000 l, GENERAL INFORMATION Features: Crane lugs Design: vertical Remarks: 2 different manufacturers (see pictures) Internal diameter: 3,200 mm Total height: 5,331 mm Heating/Cooling: available Insulation: available Max. permissible operating temperature: 70 °C Max. permissible operating overpressure: 3.0 bar Support design: Feet Location: Outdoor storage France Technical documentation: Drawing Cylinder temperature control: Half-pipe coil Nameplate: Knsdexqbz Ujpfx Agzsf Volume: 25,000 litres Jacket volume: 70.0 litres Product contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 3,000 mm Previous application: Food (Isomalt) VESSEL Specific gravity of medium: 1.35 (t/m³) Bottom: Conical floor Number of feet: 5 pcs HEATING/COOLING JACKET Bottom temperature control: Half-pipe coil INSULATION Insulation jacket: welded Insulation material: mineral wool Insulation jacket material: stainless steel Insulation thickness: 100 mm EQUIPMENT Manway / dome: in cylinder (approx. 350 x 450 mm), in top head (DN 400) Outlet: Flange DN80 TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6 mm Top wall thickness: 3 mm

Condition: used, tank capacity: 1,100 l, GENERAL Design: suspended Remarks: Former mounting pads were cut off during dismantling and are no longer available; one heating connection was cut off; vessel shows significant residue build-up Speed: 274 RPM Outer diameter: 1,090 mm Inner diameter: 1,040 mm Knedpsxqbi Eofx Agzof Explosion protection: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified) Total height: 3,200 mm Heating/cooling: available Power: 2.2 kW Seal: Mechanical seal with thermosiphon vessel Agitator: inclined blade agitator Location: Bremen Cylinder temperature control: double jacket Volume: 1,100 liters Double jacket material: V2A 1.4301 (AISI 304) Product contact material: V4A 1.4429 (AISI 316) Condition: used Cylindrical height: 1,200 mm Last application: adhesive production HEATING/COOLING JACKET Base temperature control: double jacket EQUIPMENT Manhole / access: on top head (DN 400) Discharge: flange DN40 Note: Manhole cover plated AGITATOR 1 Agitator manufacturer: Stelzer Voltage: 230/400 Volt Agitator positioning: eccentric on top head Agitator details: agitator element partially bent (see photos)

Condition: used, tank capacity: 586 l, GENERAL Design: vertical Remarks: Manufactured according to ASME guidelines. Internal diameter: 813 mm Total height: 2,093 mm Heating/cooling: present Insulation: present Max. allowable operating temperature: 204 °C Max. allowable operating overpressure: 6.5 bar Max. overpressure: 2.75 bar Stand type: mobile on castors Location: Bremen Technical documentation: drawing Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 586 liters Double jacket volume: 136.0 liters Cylinder wall thickness: 10 mm Product-contact material: enamel Condition: used Last application: pharmaceuticals VESSEL Max. allowable operating temperature: 204 °C Heads: dished ends (Klopper bottom) Number of legs: 4 HEATING/COOLING JACKET Max. allowable operating vacuum: 1.0 bar Bottom temperature control: double jacket INSULATION Insulation jacket: welded Insulation material: mineral wool Knsdpfxsxqbcxe Agzjf Insulation jacket material: stainless steel Insulation thickness: 50 mm EQUIPMENT Manway/dome: in top head MATERIAL SPECIFICATION Head material: steel Cylinder material: steel TECHNICAL DATA / DIMENSIONS Head wall thickness: 9.5 mm

Condition: used, tank capacity: 280 l, GENERAL Design: vertical Remarks: No guarantee on the functionality of the double jacket and agitator (not tested) External diameter: 780 mm Internal diameter: 600 mm Heating/cooling: available Insulation: available Knedsxqa Tvepfx Agzsf Max. overpressure: 2.5 bar Agitator type: disc agitator Number of agitators: 1 Support type: height-adjustable feet Location: outdoor storage Volume: 280 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,000 mm VESSEL Bottoms: Klöpper bottom Number of legs: 3 pcs EQUIPMENT Outlet: 32 mm MATERIAL SPECIFICATION Feet material: stainless steel

Condition: used, tank capacity: 3,685 l, GENERAL Design: suspended Remarks: 4 feet made of Fe; 1 vessel with insulation (insulation jacket Fe, painted; external diameter approx. 1780 mm) Speed: 347 rpm Internal diameter: 1,600 mm Explosion protection: Motor is explosion-proof (compliance with the applicable ATEX directives under local conditions must be verified) Total height: 3,650 mm Heating/cooling: available Power: 1 kW Max. permissible operating temperature: 200°C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 3.2 bar Seal: Mechanical seal with thermosiphon vessel Agitator: Propeller Mounting type: feet Location: Bremen Technical documentation: Drawings, TÜV certificates Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 3,685 litres Double jacket volume: 65.0 litres Cylinder wall thickness: 5 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Last application: chemical industry VESSEL Max. permissible operating temperature: 200°C HEATING / COOLING JACKET Max. permissible operating vacuum: 1.0 bar Base temperature control: half-pipe coil Ksdpfx Aexqa Tpegzsnf EQUIPMENT Manhole / dome: in the top head (DN 500) Outlet: flange DN80 Note: slight adhesions, metallic discolorations inside MATERIAL SPECIFICATION Temperature control system material: V4A 1.4571 (AISI316) AGITATOR 1 Agitator manufacturer: Stelzer Voltage: 500 Volt TECHNICAL DATA / DIMENSIONS Base wall thickness: 5 mm Agitator arrangement: eccentric in the top head Top head wall thickness: 7 mm

Condition: used, tank capacity: 1,860 l, GENERAL Design: suspended Remarks: 2 support feet made of V2A stainless steel (support surface reversed; see photos); outlet with flanged reducer Speed: 177 rpm Inner diameter: 990 mm Overall length: 3,700 mm Heating/cooling: available Power: 1.1 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Top cover: bolted lid Agitator: propeller Support feet design: support feet Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 1,860 liters Double jacket volume: 24.0 liters Cylinder wall thickness: 5.2 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Last application: pharmaceutical chemicals VESSEL Max. permissible operating temperature: 200 °C HEATING/COOLING JACKET Bottom temperature control: half-pipe coil Kodpoxqa Tcjfx Agzenf EQUIPMENT Outlet: flange DN80 Note: slight residue/adhesion present MATERIAL SPECIFICATION Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR 1 Voltage: 220/380 Volt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 3.9 mm Agitator arrangement: eccentric in top cover Top cover wall thickness: 4.0 mm

Condition: used, tank capacity: 2,750 l, GENERAL INFORMATION Design: Suspended Remarks: 2 support brackets made from Fe (contact surface reversed with cut-off steel parts; see photos); further technical documentation available Speed: 313 rpm Internal diameter: 1,400 mm Ex-protection: Motor is explosion-proof (compliance with the applicable ATEX directives under local conditions must be verified) Total height: 3,050 mm Heating/Cooling: available Power: 1.1 kW Max. permissible operating overpressure: 12.0 bar Max. overpressure: 3.2 bar Agitator: propeller Support type: feet (brackets) Location: Bremen Technical documentation: drawing available Cylinder tempering: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 2,750 liters Double jacket volume: 62.0 liters Cylinder wall thickness: 5 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,410 mm Last application: pharmaceutical chemistry VESSEL Max. permissible operating temperature: 200 °C HEATING/COOLING JACKET Bottom tempering: half-pipe coil EQUIPMENT Manhole/Dome: on top head Outlet: available Note: Manhole cover clad, metallic discoloration inside Outlet: 130 mm MATERIAL SPECIFICATION Tempering system material: V2A 1.4541 (AISI304) AGITATOR 1 Voltage: 220/380 Volt Kodpoxqa S Sefx Agzonf TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5 mm Agitator arrangement: eccentric in top head Top head wall thickness: 7 mm

Condition: used, tank capacity: 1,345 l, GENERAL INFORMATION Design: suspended Remarks: 2 support lugs made of V2A (support surface oriented differently; see photos); 1 vessel is equipped with insulation (see photos); some flanges made of Fe Speed: 313 rpm Internal diameter: 1,000 mm Explosion protection: Motor is explosion-proof (compliance with current ATEX regulations under local conditions must be verified) Total height: 2,900 mm Heating/cooling: available Power: 1.1 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Top cover: bolted lid Agitator: propeller Mounting type: support lugs Location: Bremen Technical documentation: drawing Cylinder jacket tempering: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 1,345 liters Double jacket volume: 24.0 liters Cylinder wall thickness: 5 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,370 mm Previous application: pharmaceutical chemicals VESSEL Max. permissible operating temperature: 200 °C HEATING/COOLING JACKET Bottom head tempering: half-pipe coil Knedpfx Agoxqa S Ejzef EQUIPMENT Outlet: Flange DN80 Note: slight residues present MATERIAL SPECIFICATION Temper system material: AISI 304 (V2A) 1.4306 AGITATOR 1 Voltage: 220/380 V TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4.4 mm Agitator arrangement: eccentric in the upper head

Condition: used, tank capacity: 3,532 l, GENERAL Design: Suspended Knsdpfoxqa Srox Agzsf Remarks: 3 bracket feet made of steel; half-pipe coil around the lower cylinder area; one heating connection likely slightly bent Speed: 313 rpm Outer diameter: 1,800 mm Inner diameter: 1,590 mm Total height: 3,300 mm Heating/cooling: available Insulation: available Power: 1.1 kW Max. permissible operating temperature: 100 °C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Shaft seal: Mechanical seal without thermosiphon vessel Agitator: Propeller Mounting type: Bracket feet Location: Bremen Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 3,532 liters Jacket volume: 103.0 liters Jacket material: V2A 1.4301 (AISI304) Product-contact material: V4A 1.4429 (AISI316) Condition: Used Last application: Pharmaceutical chemistry VESSEL Max. permissible operating temperature: 100 °C HEATING/COOLING JACKET Base temperature control: Half-pipe coil INSULATION Insulation material: Aluminium EQUIPMENT Manhole / dome: In the top head (DN 500) Outlet: available Note: Dents in the insulation jacket, manhole cover plated AGITATOR 1 Agitator arrangement: Eccentric in the top head Agitator equipment: Comprehensive agitator documentation available

Condition: used, tank capacity: 1,969 l, GENERAL Design: suspended Remarks: 2 support brackets made of V2A (support surface reversed; see photos) Rotational speed: 571 rpm Inner diameter: 1,000 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be checked) Overall height: 3,800 mm Heating/Cooling: available Power: 1.1 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Top head: bolted lid Shaft sealing: mechanical seal without thermosiphon vessel Agitator: propeller Pedestal type: bracket Location: Bremen Technical documentation: drawing Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 1,969 liters Double jacket volume: 70.0 liters Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 2,110 mm Previous use: Pharmaceutical chemistry VESSEL Max. permissible operating temperature: 200 °C HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Outlet: DN80 flange Note: slight residues MATERIAL SPECIFICATION Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR 1 Voltage: 220/380 V TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5.7 mm Agitator arrangement: eccentric in the top head Agitator equipment: technical documentation for agitator available Kodoxqa Slepfx Agzonf

Condition: used, tank capacity: 1,300 l, GENERAL Design: Suspended Remarks: One container is missing the agitator; one container with insulation; two lugs made of V2A (support surface inverted); some flanges made of Fe (see photos) Speed: 571 rpm Internal diameter: 990 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be verified) Heating/Cooling: available Power: 1.1 kW Max. permissible operating temperature: 200 °C Max. permissible operating pressure: 16.0 bar Max. overpressure: 3.2 bar Top closure: bolted cover Agitator: propeller Support type: lugs Location: Bremen Technical documentation: drawing Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 1,300 liters Jacket volume: 23.0 liters Cylinder wall thickness: 5 mm Product-contact material: V4A 1.4571 (AISI 316) Condition: used Cylindrical height: 1,330 mm Last application: pharmaceutical chemicals Kjdpfx Aoxqa Sfsgzjnf VESSEL Max. permissible operating temperature: 200 °C HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Outlet: flange DN80 Note: slight adhesions MATERIAL SPECIFICATION Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR 1 Voltage: 220/380 Volt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 3 mm Agitator arrangement: eccentric in top section Top section wall thickness: 4.1 mm