Used Straight Line Rip Saw for sale (16,298)

Year of construction: 1995, condition: used, In Good Condition Fsdpfx Akodq Uf Hsvjpg

Year of construction: 2026, condition: new, • 260 mm cutting height • 750 mm cutting width • variable feed rate 5-30 m/min. • 2 x 75 KW sawing motors • 3 KW feed gearbox • 70 mm Ø spindle diameter Fpedpfx Aobu Rqpjkveg • 1 set of spacer rings • electrical height adjustment of feed rollers • 400 mm Saw blade diameter • complete electric control cabinet, incl. all cables • operator panel • painted in Colour RAL 6011 • Dokumentation in E • 5.500 kg weight

Condition: good (used), Year of construction: 1996, functionality: fully functional, Roller conveyor with rip saw and outfeed table motorized roller conveyor6m rip saw, pneumatic control, 400mm saw blade Fodpouvdfmefx Akvepg Outfeed roller conveyor with pneumatic side pushers, 10m Feed table 5 x 10m with cross conveyor

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 117, saw blade diameter: 800 mm, cutting height (max.): 300 mm, input voltage: 400 V, saw drive: 15,000 W, operating pressure: 6 bar, Solid and powerful machine for carpentry and timber construction. Longitudinal cuts up to 300 mm cutting height. 800 mm saw blade for a large cross-cutting range, mounted on a rotary table. This allows nearly any mitre angle to be set. Longitudinal cuts, trimming, notching, wedge planks – everything is possible. The double-sided feed system effortlessly processes even large beams through the machine. In cross-cutting mode, the feed pistons serve as hold-downs. Two-hand operation ensures safe usage. The integrated support in the machine provides 3 m roller conveyors on both the left and right sides. The support options can be expanded by using tall, stable 3-roller supports (optional). Fodpfxsv Nktbe Akvspg The machine is tested and in good condition. Both digital displays including sensors are new (repairs alone cost €5,000). Many hoses have been replaced. The pneumatic unit has been serviced. Everything else was in excellent condition due to the machine's robust design!

Condition: used, The sale is due to insolvency. The entire system was purchased in 2021 and was only in operation for approximately 3 years. Manufacturer: Randek (Sweden) Year of manufacture: 2021 1. Saw Type: SPL 728 X04 Control: Beckhoff, touchscreen Languages: See photos Mitre cuts: 0°–360° Bevel cuts: 90°–28° Max. material thickness: 250 mm Saw blade diameter: 700 mm Power: 7.5 kW 2. Infeed unit with stacking device, right Type: UV130F2X05 Length: 13 m Fedpfx Akoxqpqkjvepg Lifting table: 4,000 kg 3. Outfeed unit with stacking device, left Type: IH106F1X01 Length: 10.60 m Lifting table: 5,500 kg 4. Label printer Brand: ZEBRA Overall system dimensions approx.: Length 24 m x width 3 m

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 98125446, saw blade diameter: 500 mm, cutting height (max.): 75 mm, positioning accuracy: 1 mm, cutting width (max.): 180 mm, CNC full optimization cross-cut sawline PAUL 11MKL for soft and hard wood. Line include : infeed conveyor with length 11525 mm, double side table for marking wood defects, measuring station with luminescence and light barrier for wood start and end detection, sawing station and outfeed conveyor 11500 mm sorting line with 5 side pushers to sorting table. Wood input length 2000-6000 mm Wood width 30-180 mm Wood thisckness 6-75 mm Min cross-section 30x15 mm or 45x6 mm Max cross-section 130x75 mm or 180x45 mm Saw blade diameter 500 mm Saw motor 5.5 kw , saw stroke pneumatic, saw cycles 0.4 sek Feed speed max 200 m/min Fjdpoxrr S Hefx Akvepg Power consumption 11.4 kw Control software CNC MAXI 5 Premium Line is in full working condition

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, saw blade diameter: 460 mm, cutting range round steel at 90°: 150 mm, working height: 1,030 mm, MSK 471 NA automatic straight cut circular saw for HSS and carbide saw blades Cutting range round up to 150 mm, square up to 140 mm Suitable for almost all profile shapes and solid material Automatic cut-off sorting by means of cut-off gripper Machine tested at KALTENBACH, wear parts replaced Fsdpfx Akoubbw Aevopg

Condition: used, functionality: fully functional, - Manufacturer: MEZ Frenštát p. Radh. - Type: F200 - Motor power: 30 kW Fpedpfx Ajxa Evzekvsg - Single-shaft design - Max. height of processed material: 120 mm - Min. length of processed material: 2 m

Condition: new, Year of construction: 2026, I am selling this long-cut (shortening) saw. Suitable for cutting boards, prisms or large prisms. Cutting length: 600 / 900 / 1200 mm Cutting height: 100 / 150 / 200mm Motor power: 7.5 / 11 / 15kW Disc diameter: 500 / 600 mm Disc feed mechanical using an electric motor. Fjdpfsx Ut Iqjx Akvjpg Individual parameters can be customized. Tables according to specification.

Condition: new, Year of construction: 2026, I am selling a KUSING RP-OP-600 PRO rip saw. This is a top-of-the-line rip saw with one or two simultaneously digitally adjustable saw blades. The control has a memory with 5 values for faster and more precise work on the machine. Fpedpfxjx Utyyo Akvog The machine has both upper and lower traction using six steel traction rollers to ensure maximum traction even when processing thicker materials and prisms up to a maximum height of 105 to 130mm. The machine can be equipped with any number of blades with a clamping system using sliding housings for quick change of dimensions. Technical parameters: Input width: 700 (up to 900mm) Feeding roller length: 600mm Number of pulling rollers: 6x Maximum cutting size: 550mm (700mm) Main motor power: 11 / 15 / 18 kW Max. Disc diameter: 350mm Maximum cutting height: 105 mm (130 mm) Shaft diameter: 50mm Shaft length: 600mm The machine meets all safety requirements for CE standards. The machine is made in Slovakia. Possibility of configuring the machine according to requirements, whether it is the number of lasers, selection of input and output roller paths, etc.

Condition: used, Year of construction: 2015, functionality: fully functional, SECOND-HAND MULTI RIPS SAW CML MOD. SCAJ350RT - CE RULES - N. 2 mobile blades - Kw 37 - Year 2015 Fpodpfjx Run Rjx Akveg

Year of construction: 2023, condition: new, MRS 300 is a multi-blade rip saw. Machine frame is cast-iron, all the main parts are enclosed, ensuring protection and perfect stability. Feeding unit is straight line caterpillar style, feeding with heavy guided chain. Chain blocks are special cast iron with heat treated and precision ground pins. Nickel-chrome steel saw srbor with 70 mm spindle. Locking mechanism is made with quick release sleeve system. Machine is on stock and can be delivered quickly! The price is valid for a version with motor power of 30 hp. FEATURES: - 3 sets of anti kickback fingers. Two at the top and one at the bottom. - powered lifting and lowering the pressure rollers - new style round fence bar support with quick shift long fence Fjdpfx Aef Dql Tjkvjpg - automatic centralized lubrication system - automatic star-delta switch (slow speed start) and low voltage controls - C.E European guard and safety features - long fence for control of longer workpieces - Nominal voltage: 400 V (3-phase)

Year of construction: 2022, condition: new, I sell 150 sets of new saw blades suitable for multiple rip saws multirip cutting machines. Dimension saw blade PILANA 290 x 2,5 x hole 60 teeth 30+4 FZ and PILANA 250 x 2,3 x hole 60 teeth 30+4 FZ Fpodsw Am Imjpfx Akvjg Price totally 2000 Euro. Available immediately.

Condition: used, Strip Processing Line - Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Excellent equipment and feed-in aids Required floor space for the complete line (L x W): approx. 7000 x 3000 mm Total weight of the system: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rollers: 7 pcs Straightening roller diameter: Ø 40 mm Number of pinch rollers: 2 pcs Pinch roller diameter: Ø 80 mm Entry height, pass height: 1500 mm - Straightening rollers hardened, ground, and hard-chromed, with central support - Pinch rollers hardened, ground, and hard-chromed, with hydraulic disengagement - Manual straightening roller gap adjust - Feed-in aid with hydraulically extendable tongue and hydraulically adjustable deflection roller - Adjustable side strip guide - All straightening rollers driven via distribution gearbox with cardan shafts Fpjdpfxeif Sg Ss Akvjg - Both pinch rollers driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightening machine opening stroke 250 mm for cleaning or processing thicker material, stroke movement via trapezoidal thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Nett weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Coil outside diameter: max. 1600 mm (with coil car) Coil outside diameter: max. 2000 mm (without coil car) Coil turntable diameter: Ø 1700 mm Coil inside diameter, expanding range: 460-520 mm Coil width, nominal: max. 630 mm Spreader jaw width: 750 mm Height of the decoiler drum above base plate: 1500 mm - Decoiler drum driven by hydraulic motor and gear - Pneumatic run-on brake on decoiler drum, TWINFLEX - Hydraulic expansion of the decoiler drum, centrally via wedge slider system - Hydraulic hold-down arm with hydraulically driven double pendulum roller - Coil car with 12 tons lifting force and 300 mm stroke - Decoiler frame above floor with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Nett weight: approx. 5 tons Central hydraulic unit, adjacent Tank capacity: 350 liters Motor power: 18.5 kW - Drive motor with 2 REXROTH pumps (tandem pump) - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Nett weight: approx. 800 kg Electrical cabinet, adjacent - All cable connections via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Nett weight: approx. 800 kg

Condition: good (used), functionality: fully functional, number of straightening rollers: 7, coil outer diameter: 1,400 mm, coil inner diameter: 508 mm, roller diameter: 80 mm, number of feed rollers: 2, feed roller diameter: 80 mm, straightening roller diameter: 80 mm, coil width: 400 mm, load capacity: 3,000 kg, 1. Decoiler Make: Dimeco Model: 2371 E-FPS Year of manufacture: 2006 Load capacity: max. 3 tons Strip width: max. 600 mm Expansion range: 470 – 530 mm Coil outer diameter: max. 1,400 mm Equipped with: • Hydraulic expansion • Pneumatic hold-down roller from above • 6 strip edge guide arms • Pneumatic disc brake 2. Straightening Machine Make: Dimeco Model: 1676 C-VV Year of manufacture: 2000 Strip width: max. 400 mm Strip thickness: 0.8 – 4.5 mm Fpodpfx Aketgvgpsvog Number of straightening rollers: 7 Number of entry and exit rollers: 2 each Roller diameter: 80 mm Equipped with: • Frequency-controlled drive • Hydraulic strip feeding aid with support table, feed tongue, hold-down arm from above • Pneumatically liftable entry roller • Lateral strip guide rollers • Pneumatically swivelling strip transfer table between straightening machine and feeder

Condition: used, Strip Straightening Machine for Coil Material WANZKE Type RG 400-7 Coil Processing Line REF No.: 1349-6 Year of manufacture: 1983 Nominal strip width: 400 mm Roll width: 408 mm Strip thickness: max. 2 mm Fpjdpfx Akexw Rcusvog Strip cross-section: max. 600 mm² Roll width, straightening rollers: 408 mm Number of straightening rollers (top): 3 (non-driven) Number of straightening rollers (bottom): 4 (driven) Straightening roller diameter: 50 mm Feed rollers: 2 pcs, Ø 50 mm (lower roller driven) Feed roller width (top): 390 mm Feed roller width (bottom): 408 mm Strip speed: approx. 5 - 45 m/min Motor power: 1.1 kW Power supply: 230 Volt, 50 Hz - Infinitely variable straightening speed via DC motor with DC controller - Drive via geared motor with chain drive - Loop control with speed regulation with 2 speed stages - Upper roller frame adjustable via 4 handwheels - 4 dial gauges for fine adjustment - Mechanical opening of the upper rollers via eccentric lever - Adjustable lateral strip guide at the infeed side - 2 roller baskets for strip guidance - Electrical diagram available Space required by straightener with control unit (L x W x H): 1200 x 800 x 1600 mm Weight: 620 kg Good condition

Condition: like new (used), Year of construction: 2019, Roofing batten Raimann line with minibundling and stacking. Included is: - infeed mechanism - Raimann Profirip 340 (2019) Fpodjmk S S Ejpfx Akvjg - outfeed rubber belt conveyor - ejecting roller conveyor - accumulating conveyor (before minibundling) - minibundling machine (4 mb/min) - accumulating conveyor (after minibundling) - stacker (7 layers/min) Raimann Profirip 340 parameters: Year of manufacture: 2019 Speed: 10-80m/min Main motor: 55kW Cutting height: 15-140mm Maximum widht: 340mm Line is in good working condition, still in operation and is available for viewing in sawmill in Slovakia. Reason of sale is upgrade to 250m/min planer line. For more information or to arrange viewing feel free to contact us.

Condition: good (used), Ari Vislanda sawmill Kockums chippers + double profiling line capacity 75,000 m3 timber per shift. Fpodpfxjy Dpnre Akvog Only one operator required. Lisker control for Ari/Kockums line and edging line as well.

Condition: used, Year of construction: 2022, functionality: fully functional, COMPLETE SAWING LINE Fpedpjxlym Ejfx Akveg - VTZ 1400 PLUS log band saw with BM 900 chipper canter, including all necessary conveyors - FRC chipping edger with 3D scanning and optimisation, including all necessary conveyors - Automated stacking machine - Waste conveyors

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 140 2814, conveyor belt width: 700 mm, sheet thickness (max.): 4 mm, The payment deadline for the machine is 18.05.2026! Submitting a bid obligates you to collect the machine on time by 22.05.2026! TECHNICAL DETAILS Band width: 60 - 700 mm Sheet thickness: 0.5 - 4 mm Feed length: 0 - 700 mm Fpedpey Nkdlefx Akvog

Condition: ready for operation (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 140 256.4, conveyor belt width: 600 mm, sheet thickness (max.): 4 mm, The payment deadline for the machine is 18.05.2026! Submitting an offer obligates you to collect on time by 22.05.2026! TECHNICAL DETAILS: Band width: 600 mm, Sheet thickness: 0.5 - 4 mm, Feed length: steplessly adjustable 30 - 500 mm. Fodpfxoy Nkb Do Akvspg

Year of construction: 2025, condition: new, Multirip saw / Edger Max. cutting width 800mm Max. cutting height 90mm Division of cuts freely adjustable Up to 8 Circular saws possible Laser cutting position marking Fodpfx Ajy Rq Rnokvopg Perfect for Pallet Production The price is for the Machine only! The roller tables are optional extras and can be made to size and length as required.

Condition: new, Type MJ1435F Fpedpfx Aed Nlvpskvog Feed speed (inverter) 6-35 m/min. Spindle diameter 70 mm Diameter of sawblades 250-355 mm Cutting width 300 mm Cutting height 100 mm Min. cutting length 360 mm Motor power 22 kW Total power 26,1 kW Transport dimensions 2670x1200x1500 mm Weight 1700 kg Delivery term: ~ 3 months.

Condition: new, Type MJ1412-40 Feed speed (inverter) 9-35 m/min. Spindle diameter 70 mm Diameter of sawblades 355-405 mm Cutting width 400 mm Cutting height 100/115 mm Min. cutting length 290/480 mm Motor power 37 kW Total power 42,1 kW Transport dimensions 3000x1300x1500 mm Fedoitvfpepfx Akvjpg Weight 2000 kg Price 22450 Eur (EXW Jonava, Lithuania)

Condition: excellent (used), CATALOG NUMBER 7881 Technical data: - Cutting height: 30-200mm - Max saw blade diameter: 350mm - Spindle diameter: 70mm - Max cutting width of wood: 500mm - Working width of arbor with saws: 400mm - Minimum length of cut wood: 1000mm *Top: - Anti-kickback devices - 4 toothed feed rollers – pneumatically pressed Fpodoyz T R Ejpfx Akvog *Bottom: - Sliding roller - Anti-kickback devices - Toothed feed shaft, 2 pcs - Arbors with saws - Toothed feed shafts, 2 pcs - Infinitely adjustable feed speed via frequency inverter - Feed motor: 3kW - Main motors: 2x55kW - Extraction outlet diameter: 250mm - Machine dimensions (L/W/H): 2150x1880x1800mm - Machine weight: approx. 3500kg ADVANTAGES – Made in Poland – Double-arbor multi-blade saw, 2x55kW – Original DTR + CE documentation – Used multi-blade saw in very good condition Net price: 88,900 PLN Net price: 21,200 EUR (based on the rate of 4.2 EUR) (Prices may change with significant rate fluctuations)