Rip saw

KUSING RP-OP-600 4.2 PRO

Condition: as good as new (ex-display), Year of construction: 2017, functionality: fully functional, Filter for extraction of dust and sawdust. Csdpfx Agetzld Uj Sjrd

Condition: used, Year of construction: 2023, Used system Year of manufacture: 2023 Condition: As new, system has only a few operating hours Equipment and technical specifications: - Stationary clean air filter system ECO JET DUO 6 XL ZRS 2 x 7.5 kW - For extraction of wood dust and wood chips - Fan: 2 x 7.5 kW - Airflow rate: 10,000 m³/h at - Negative pressure: 2,700 Pa (total) / 2,200 Pa (static) - Filters: 80 pcs à 2.50 m - BIA category M, electrically conductive - Filter area: 77.6 m² - Filter surface load: 129 m³/(m²x h) - Filter cleaning: AL-KO OPTI JET® - Pressure relief panels: 0.84 m² (bursting discs) - Lower section with discharge chute and rotary valve Dry discharge with C-coupling Comprising: - ECO JET DUO 6 UPPER PART, 2 x 7.5 kW: Clean air filter system; 2 x 7.5 kW fan; AL-KO OPTI-JET filter cleaning; Incl. pressure relief panels and dry discharge with C-coupling; without filters and control; Incl. pressure sensors - ECO JET DUO 6 ZWR XL - 1100 MM: Intermediate ring for expansion or unit height increase with 2 inlet connections for suction nozzles - Base frame with discharge chute and integrated rotary valve 960/1 FG: For disposal of chips via on-site transport fan into existing silo or similar Transport pipe DN 200 mm, approx. 1,260 mm long under rotary valve, connection to transport pipe to be provided by buyer Rotary valve certified according to ATEX Directive 94/9/EC Technical data ZRS 960/1FG: CE 0588 Ex II 1D/- (Unit for indoor/outdoor); EX D (protection system); FSA 11 ATEX 1614X Motor output: 0.18 kW / 0.78 A 3 Ph / 400 V / 50 Hz Protection class / mounting: IP 54 / B3 Insulation class: F Speed: 41 rpm Discharge capacity*: 15,744 l/h* Number of cells: 7 pcs Inlet/outlet cross-section: 960 x 250 mm / 960 x 208 mm Dimensions (W x D x H): 1,100 x 605 x 330 mm Temperature range: up to 50°C *depending on material - FILTER & SUPPORT CAGE 2.5 / CAT M EL WHITE FILTER ECO JET DUO 6: 80 pcs required Filter BIA category 'M' – electrically conductive; 2.50 m long, incl. support cages; 77.6 m² filter area - Inlet nozzle 400 mm: with backdraft damper in rectangular duct - ECO JET backdraft damper 910x346x500 - Control cabinet – AL-KO Control System: BASIC CONTROL ACS II WITH TOUCHSCREEN DISPLAY: Basic unit for cascade control of 2 fans via frequency inverter (FU) up to max. 37 kW; corresponding performance module and controls as well as the frequency inverter are included in the basic unit; the FU is installed in the control cabinet Codoyk I U Aepfx Ag Serd Cascade control with FU handover: Fan 1 operates on the frequency inverter; when threshold is reached, switches to mains operation; Fan 2 takes over FU and regulates as needed; Basic functions: Control voltage 24 V Touchscreen display, ST 1200 control, Sitop Power supply, collective fault warning Display of fault message as plain text on display and collective fault indicator on the door Manual discharge start via display button Start filter cleaning via differential pressure Manual filter cleaning start via button Post-cleaning Fire monitoring

Year of construction: 2004, condition: excellent (used), Four-side planer -max. planing width 23cm -max planing height 16cm -2 pulling rollers in the table -chromed table - smooth regulation of the feed speed Credpfx Agehlp D Ne Ssd -2 pulleys from the top in front of the lower head, additionally a roller apparatus for short elements - 4 spindles: lower 5.5kW, right 5.5kW, left 5.5kW, upper 7.5kw The machine is in very good condition, little used, with spiral heads on the bottom right and left, with a Terssa knife head on the top.

Condition: as good as new (ex-display), Number of spindles 6 St. Working width 250 mm Working height 150 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-24 m/min. weight 4770 kg Dimensions (L/W/H) 4722x1860x1776 mm Vierseitenhobelmaschine Kuper SWT XL-6 in Fenster-Version mit elektronischer Axial- und Radialverstellung der Spindeln. Schwerer Maschinenständer, verwindungsfrei und schwingungsarm. Anzahl der Spindeln: 6 Cjdpfx Asvnv Ubog Ssrd Arbeitsbreite: 250 mm Arbeitshöhe: 150 mm Abrichttischlänge: 2500 mm Spindeldrehzahl: frequenzgeregelt 4.000 - 8.000 U/min Vorschubgeschwindigkeit: 6-24 m/min Ausführliche Beschreibung finden Sie in nebenstehender PDF-Datei! (Technische Angaben laut Hersteller - ohne Gewähr!)

Condition: excellent (used), Year of construction: 2015, operating hours: 2,200 h, functionality: fully functional, machine/vehicle number: G3158-0645, HYUNDAI WIA MODEL L300C 2 AXIS CNC LATHE WITH FANUC 0i-T. Very Low hours usage -2200 hours cutting time COOLANT SYSTEM - HIGH PRESSURE 20 BAR PARTS AUTOMATION - BARFEED INTERFACE CHIP CONVEYOR - SIDE HINGED CNC CONTROL OPTION - MANUAL GUIDE-I (NC FANUC 0i) PROBING - QUICK TOOL SETTER - MANUAL TRANSFORMER - 35 KVA AND CABLE MACHINE CONSTRUCTION & FEATURES • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity • 3,000 Rpm High Power Main Spindle • Heavy Duty Cutting with Excellent Performance • 12 Station Rigid Turret • 20 x 24 m/min Rapid Traverse • Hardened & Ground Solid Box Guide Ways MACHINE CAPACITIES Swing Over the Bed Ø 750 mm Credpfew Dcdysx Ag Sod Swing Over the Carriage Ø 480 mm Maximum Turning Diameter Ø 560 mm Maximum Turning Length 720 mm Bar Capacity Ø 90 mm SPINDLE Chuck Size Ø 305 mm Spindle Bore Ø 102 mm Spindle Speed (rpm) 3,000 rpm Motor (Max/Cont.) 26/22 kW Torque (Max/Cont.) 1,098/929.7 Nm. Spindle Type Belt + 2 Step Gear Spindle Nose A2-8 FEED Travel X 335 mm Travel Z 750 mm Rapid Speed X 20 m/min Rapid Speed Z 24 m/min Slide Type Box TURRET Number of Tools 12 Tool Size - OD 25 mm² Tool Size - ID Ø 50 mm Indexing Time 0.3 Sec/Step TAILSTOCK Taper MT 5 Quill Diameter Ø 100 mm Quill Travel 120 mm Travel 750 mm TANK CAPACITY Coolant Tank 220 L Lubricating Tank 1.8 L POWER SUPPLY Electric Power Supply 30 kVA Thickness of Power Cable Over 35 mm² Voltage 415 V / 50 Hz / 3 Ph MACHINE Floor Space (L x W) 3,506 x 2,002 mm Height 1,997 mm Weight 6,400 kg STANDARD SUPPLIED MACHINE FEATURES • Ø 305 mm Hollow 3 Jaw Power Chuck • 220 L Coolant Tank • Door Interlock • Chuck Clamp Foot Switch • Total Splash Guard • Quill Type Tailstock • Call Light • Standard Live Centre • Quick Tool Setter • Levelling Pads • Operation Manuals • Electrical & Mechanical Drawings

Condition: refurbished (used), Year of construction: 2001, AMADA MODEL HFE 130-3 130 tons capacity x 3000 bending length hydraulic downstroking press brake complete with OP 2000 7 AXIS cnc control, ERWIN SICK machine mounted electronic guards , side and rear interlocked fencing Model Amada HFE 130-3 downstroke CNC Press brake Year 2001 Tonnage 1300 KN Type OP 2000 CNC Codpfjthgidex Ag Sjrd Controlled Axis Y1, Y2, X, R1 R2 Z1 Z2 Max. Bend Length 3000 mm Open height 470 mm Stroke Length 200 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity 110 LITRES Motor Power 11 kw Weight 7800 KG kg CNC Control Backgauge Stoke (X axis) 700 mm/s Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,450 mm, total height: 1,790 mm, total length: 3,470 mm, Oy Foudila Ab is a company, in Kaskinen, Finland with over 45 years of experience in equipment for timber handling. For the past 15 years, we have also been active in pallet industry and have developed a lot of machines over the years for nailing, automatic timber feeding and stacking. We manufacture both standard machines and customized solutions for the customer's purposes. Foudila deck nailing machine, DNM-153 is a compact, flexible, and efficient machinery for production of decks for pallet industry to an excellent price-performance ratio. Thanks to the machine’s high production speed, user-friendly design and board magazines with large buffer, it is well suited for manufacturing both standard and special products in small and large production series with only one operator. The machine is capable of producing over 1000 decks per work shift. The machine is equipped with three nailers with magazines for large nail coils. Each nailing pattern can include 1–3 nails and can also be clinched if needed. The boards are fed into magazines with a large buffer – three cassettes for stringer/under boards and one cassette for deck/upper boards. The machine is controlled and programmed via a modern and user-friendly software interface on a 10” touchscreen, using a Beckhoff control system. Thanks to the machine’s compact design, it requires a very small production footprint and makes installation fast and easy because the machine can be delivered fully assembled. The machine can of course be equipped with a conveyor for finished products, automatic stacker and automatic board feeder. These options can also be installed at a later stage, allowing for investment step-by-step. Please feel free to contact us for more information, technical specifications, and price details. Cedpfxjyl Tr Ns Ag Serd

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, operating hours: 4,452 h, cutting height (max.): 120 mm, cutting depth: 340 mm, main saw diameter: 380 mm, Raimann KR 310 E 340/120 multi-saw with movable disc - manufactured in Germany - year of manufacture 1990 - DTR - number of hours 4452 h TECHNICAL PARAMETERS: - track width 340 mm - cutting height max 120 mm - cutting height with movable disc 85 mm Codpfx Agsrhig Eo Ssrd - engine power 30 kW - minimum length of the element 700 mm - width of table 740 mm - feed regulated on inverter 6-48 m/min - three rows of pawls - possibility to mount a bush - sleeve diameter 80 mm - length of fixed sleeve 190 mm - electrical adjustment of cutting height - electrical adjustment of shaft height - four top pressure rollers - automatic central lubrication - laser - ruler - spigot diameter 250 mm Overall dimensions of the machine 250x200x220 cm weight 2000 kg

Condition: excellent (used), Year of construction: 2018, Working table dimensions (width x depth): 600 x 400 mm Internal dimensions of working tank (W x D x H): 975 x 555 x 350 mm Fluid level in working tank (min. - max.): 170 ~ 300 mm Working tank volume: 180 L X-axis travel: 350 mm Y-axis travel: 250 mm Z-axis travel: 270 mm Maximum workpiece weight: 550 kg Maximum electrode weight: 50 kg Distance between clamping system and table surface: EROWA COMBI / EROWA ITS: 217 ~ 487 mm 3R COMBI / 3R MACRO: 200 ~ 470 mm Distance between table surface and floor: 810 mm Machine dimensions (W x D x H) (including power supply and dielectric tank): Credpfsyv Ezlex Ag Sod 2080 x 1955 x 2350 mm Installation footprint (W x D): 2800 x 2900 mm Machine weight (including NC): 3200 kg Air pressure (automatic clamping system): 0.65 MPa Air consumption: 100 l/min (ANR) Total power consumption: 3-phase, 50/60 Hz, 10 kVA

Condition: new, Volumes: available in 10 m³ or 20 m³ versions Product description: The Easyplan is a compact yet powerful drying system designed for drying softwood and hardwood, as well as for treating pallets and wood packaging to comply with ISPM-15 standards. It ensures complete phytosanitary compliance and consistently delivers high-quality drying results for a wide range of timber types. Installation takes less than one day, making it ideal for rapid deployment in small to medium-sized production facilities. The process is fully automatic – simply load the kiln and let the system manage the entire drying or heat treatment cycle. Available heating options: Electric: 27 and 36 kW Gas: 200 kW gas burner Hot water/steam Wood stack size for EASYPLAN 10 and EASYPLAN 20: 4 m - 6 m 180 - 300 EPAL pallets Key benefits: Capacities of 10 m³ or 20 m³ to suit different production requirements Suitable for both softwoods and hardwoods ISPM-15 compliant pallet and wood packaging treatment, firewood drying Fully automatic drying process Quick installation in less than 24 hours Codew Hfzaopfx Ag Sjrd Flexible heating options to match available energy sources