Used Suction Extraction for sale (5,985)

Condition: good (used), Year of construction: 2014, Lifting capacity: 500 kg Swivelling, horizontal/vertical 6 suction plates Height: 1250 mm Width: 1250 mm Depth: 1150 mm Net weight: 130 kg Condition: good, second-hand Lasdpfxezb E Iue Abnoc

Condition: as good as new (ex-display), Year of construction: 2025, Special price for trade fair machine *available upon request New: With the frequency converter option, up to a maximum of 45% can be eligible for government subsidies. Combination of: mütek briquetting press MPP 60 + dust extraction unit MMJET 350 *Approved for indoor installation *Both individual machines are fully manufactured and in stock; they only need to be connected. 1. Technical data of the briquetting press: Our best-selling briquetting press, a classic. + Proven, simple technology for extremely low failure rates + 25 years of experience, continuous development, and know-how + Several thousand machines in use with satisfied customers + Excellent price-performance ratio Commodity code: 84793010 Briquet diameter: 50 mm Front socket: 50 mm Briquet stroke max.: 40 mm Briquet stroke opt.: 40 mm Throughput (material-dependent): up to 60 kg/h* *depending on the bulk density *based on a bulk density of 200 kg per cubic meter. Motor power: 5.5 kW, 400 Volt / 50 Hz / 3-phase, Overall dimensions of the system: 2.2 x 1.1 x 2.8 m (L x W x H) Height - 2.8 m (special container) Delivery is also possible in 2 parts Weight: approx. 1200 kg, Oil volume: 110 liters Ledped Su Hxofx Abnjac Silo diameter: 1000 mm Pump: 27 liters Hydraulic pre-compactor Option: cooling of the press jaws: no Option: cooling of the hydraulic oil: yes Option: level monitoring: yes CE compliant 2. Technical data of the clean air dust extraction unit MMJET 350: Dust extraction connection diameter: 350 mm Motor: 11 kW Dust extraction nozzle on the left (when standing in front of the dust bin) Residual dust content:

Year of construction: 2022, condition: new, Highlights of our two extraction systems Eco 3000 and Eco 5000 +Solid sheet metal construction ensures ideal flow conditions +resistant wind impeller +constant extraction performance even under constant stress + Connection of up to a maximum of 3/4 machines possible using the supplied distributors +high suction power due to large filter surface (filter dimensions: ø500x1100mm) +Integrated driving device for easy manoeuvring Scope of delivery: Running gear, filter and chip bag, distributor (connection for 3/4xø100mm suction pipes), incl ---- Device available in two designs: *in the following marked with position 1) and 2) 1) Extraction system Eco 3000 - 1.5 kW * with a chip bag and an industrial polyester filter Motor power S1 in W 1500 Installation dimensions in mm 985x560x2250 Extraction capacity in m³/h: 3,000 Suction outlets 3x (ø100mm) Negative pressure in Pa: 2200 2) Extraction system Eco 5000 - 2.2 kW Laodpfjidma Njx Abnjc * with two chip bags and two industrial polyester filters Motor power S1 in W 2200 Installation dimensions in mm 1540x560x2270 Extraction capacity in m³/h: 5,000 Suction outlets 4x (ø100mm) Negative pressure in Pa: 2600 --- Information applies to both devices: Sound pressure level in dB(A) < 85 dB Voltage: 400V / 50Hz *Option: also available in 230 V Chip bag diameter in mm: 500 Chip bag length in mm: 850 Delivered in a box for self-assembly in a few steps The filters must be cleaned manually at regular intervals. Surcharge for suction with automatic cleaning + €4,700 net

Condition: used, Filter system, extraction unit, clean-air extraction unit SCHUKO type STA + S 140 / 0 / S1 Extraction filter for wood chips, dust extraction, central extraction, bagging unit Fan type S 140 / 0 / S1 Serial no. Year of manufacture 12 / 2004 Nominal air flow 1,451 m³/h Negative pressure 1,398 Pa Filter area 18 m² Extraction connection Ø 140 mm, reduced to Ø 120 mm Air outlet 480 x 480 mm Motor power 1.1 kW Power supply 400 Volt, 50 Hz - Equipped with 24 filter bags (Ø 160 mm, length 1,500 mm) - Mechanical filter cleaning via vibratory motor - 2 discharge pipes at the bottom for dust collection bags, each Ø 500 mm reduced to Ø 300 mm - Dry extinguishing line with C-hose connection, fire department connection in case of filter fire - Differential pressure switch for filter contamination detection - Without control system (no control system present) Laedpfor R Ewlsx Abnoc - Mounted on 4 steel pipe legs (square tube 40x40 mm) Overall height as shown in pictures: 3,050 mm Space requirement L x W: 1,850 x 1,000 mm Weight approx. 400 kg Very good condition Ideal for wood dust, wood chips, plastic dust or plastic chips.

Condition: new, Year of construction: 2026, The CORMAK extraction units of the DCV series have been developed for the filtration of primarily very fine-grained dust. It is designed to clean itself in an automatic cycle without any effort on your part. Our technology department has placed great emphasis on creating a motorised shaking system in which the entire filter cleaning cycle takes place automatically in a closed system. Strengths of the DCV dust extraction units Robust solid construction for quiet and vibration-free operation of the dust extractor Very high tightness of the entire extraction system, guaranteeing best air quality inside the plant and no heat loss during the heating period Powerful and quiet radial fan for high vacuum performance Possibility to build a ceiling system and feed several machines working simultaneously with the DCV extraction units Trouble-free automatic filter shaking system Mobile chassis to facilitate trouble-free movement of the extraction units throughout the plant Waste containers designed to maintain 99.99% containment and equipped with a mobile trolley system Control cabinet with the possibility of precise tracking of filter contamination status or activation / deactivation of the unit The polyester filter traps dust with a diameter of up to 5 microns, for the filtration of smaller particles a filter such as HEPA must be used It is forbidden to use this extraction in explosive atmospheres. The extraction is used for working in the carpentry industry with sawdust, shavings, dust (it is not suitable for working with wet raw material e.g. wet sawdust) Before activating the extraction, the lower beam has to be dismantled in order to have free access to the chip container Technical specifications Lajdpfxeuc Unqe Abnjc CONTINUOUS DUTY MOTOR POWER S1 3.0 kW RPM 3000 rpm EXTRACTION CAPACITY 4500 m3 DIAMETER OF THE SUCTION NOZZLE 200 mm SUCTION VELOCITY 28-32 m/s FILTER AREA 6 m2 FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 18 DIMENSIONS 752 x 1502 x 2200 mm WEIGHT 200 kg

Year of construction: 2010, condition: good (used), Granule dryer, granule drying system, granule conveyor, vacuum conveyor, vacuum station, drying container, vacuum suction conveying system, vacuum suction device, vacuum loader, hopper loader -Manufacturer: Plastic Systems, granulate conveyor vacuum suction conveying system -Type: PD2-40 FC1 -Side channel blower: Elmo Rietschle Lajdpfx Aboy R S Twsnsc -Individual components: see photos -Quantity: 1 device available -Dimensions: 530/520/H1120 mm -Weight: 56 kg

Condition: good (used), Dust extraction blower, extraction, extraction system, dust extraction device, cyclone separator, cyclone, separator, dust separator, centrifugal separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system, cartridge dust extraction system, cartridge filter device, cartridge filter -Manufacturer: Zender, filter system cartridge filter with pneumatic filter cleaning -Inlet opening: Ø 390 mm -Outlet opening: Ø 390 mm -Quantity: 1 piece available -Price: per piece Lajdpfey R S E Hsx Abnjc -Transport dimensions: 4000/1480/H1650 mm -Weight: 700 kg

Condition: used, Year of construction: 2008, functionality: fully functional, power: 1.75 kW (2.38 HP), input voltage: 400 V, input current: 3 A, volume flow: 2,500 m³/h, actuation type: electric, Equipment: CE marking, documentation/manual, X-Cyclone Ultra Cleaner Model UC Compact 2 Oil Mist Separator Air Flow: 2000 m³/h Dimensions: Overall Height: 820 mm Width: 545 mm Ledpfx Asy H Ik Rsbnoac Length: 780 mm Weight: 70 kg Noise Level in dB(A): 67 Connection Spigot DN 300 mm Housing made of painted sheet steel in RAL 5002 With integrated fan Incl. permanently attached silencer element With inserted, washable soundproofing mat 1 pc. tray with wheels Suspended Particle Filter Attachment; for UC 2 Com With H11 Suspended Particle Filter Type NF-HEPPA-C2 Attachment dimensions: 685 x 530 x 350 mm

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, type of input current: three-phase, overall weight: 875 kg, input voltage: 400 V, power: 5.5 kW (7.48 HP), input frequency: 50 Hz, We offer this as new Donaldson DFPRE4 SPKTRP welding, plasma or laser smoke suction unit, year of construction 2025. Never used in production only used for demo. Fully assembled with pre-wired fan and controls. Model: DFPRE4 SPKTRP Serial number: 19318603 Sequence number: 01 Manufacturing date: 12-2025 Voltage: 3×400 V Power: 5.5 kW Frequency: 50 Hz Phases: 3 Net weight: 875 kg Control timer part number: AM2155001 Control timer input: 400 V~ Control timer output: 24 V= If you have any questions or need more information, feel free to send us a message or give us a call. Lajdjy T Ipyepfx Abnoc

Condition: excellent (used), mileage: 133,000 km, power: 294 kW (399.73 HP), first registration: 12/2016, fuel type: diesel, axle configuration: 8x2, fuel: diesel, brakes: engine braking, color: blue, driver cabin: day cab, gearing type: mechanical, number of gears: 16, emission class: euro6, total length: 11,610 mm, total width: 2,550 mm, total height: 3,700 mm, loading space volume: 15 m³, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, navigation system, power mirror, - Brake booster Lsdpfx Ajza Id Nobnoac - Remote-controlled central locking - Refrigerator - Air suspension - Air horn - Radio/CD player - Reversing camera - Sun visor - Toolbox - Xenon lighting - Central lubrication Manufacturer: WIEDEMANN Model / Sales designation: SUPER 1000 15 Equipment number: D/BAM/1666/T Factory No.: X OW 1000 1494 Year of manufacture: 02.12.2016 Equipment: Suction / pressure tank body ADR Sludge compartment – variable size, rear closure floor and front torispherical head made from stainless steel, material 1.4404, sludge tank in stainless steel, material 1.4404, auxiliary tipping device, sludge tank lid/ADR, sludge tank lid – hydraulically opening, central locking pneumatically operated, level indicator with scale at the tank bottom, lower suction connection with gate valve DN 125 reduced to DN 100, lower suction connection pneumatically actuated, upper suction connection with gate valve DN 125 reduced to DN 100, hydraulic telescopic piston, display of 3 pre-set piston positions, ADR equipment, tank code L4BH (without heat recovery), splash partition in stainless steel 1.4301, vacuum pump type CVS VACUSTAR 1600 – DN 100, overfill protection, vacuum pump cooling, oil separator and silencer, vacuum pump flushing device, vacuum system piping, safety fittings and fittings DN 125, suction hose reel 25 m DN 125, special spiral suction hose 25 m / DN 125, oil-resistant, transport hose reel 40 m DN 80 (side-mounted), suction and high-pressure (HP) boom, retractable suction and HP boom, water compartment – variable, water filling device, hand washing device, warm, level control – Plexiglas sight glass for water compartment, high-pressure pump type URACA P 345-60, HP system protection, high-pressure reel 220 m DN 25 or 180 m DN 32, at the boom, high-pressure hose 180 m DN 25, rubber (GrüloKan 250), large automatic winding device, pressure roller – large HP reel, meter counter, high-pressure reel 80 m DN 13, hydraulic, high-pressure hose 80 m DN 13, rubber (GrüloKan 250), water shortage protection, pneumatic system, three-stage hydraulic system, centralized lubrication system, hydraulic winch, electrical system, reversing camera system with 2nd camera, engine can be started from control panel, PLC/CAN-BUS control, control cabinet with display, radio remote control with display, equipment cabinet with single flap – one side, insert tubes for suction hoses, pump room sound enclosure, full side paneling, toolbox approx. 800x500x500 mm, stainless steel, 3 work lights (LED), 2 revolving warning lights – flashing version, operating hour meter for HP pump; operating hour meter for vacuum pump, compressed air connection, spring cable pull, ladder, ladder holder, shovel, broom, and manhole hook Next inspection dates: General inspection (HU): 01 / 2026 Section 57b test: 05 / 2025 Safety inspection (SP): 07 / 2025 GGVSEB/ADR inspection: 02.01.2026 Tank inspection: 12 / 2027 German registration In very good condition! Immediately operational Transmission Transmission: ZF, 16-speed manual transmission Axle configuration Front axle 1: steered Front axle 2: steered Rear axle 1: steered Weights Unladen weight: 21,952 kg Payload: 10,048 kg Gross vehicle weight: 32,000 kg Functionality Body make: Wiedemann Super 1000...

Condition: like new (used), functionality: fully functional, machine/vehicle number: Nilfisk Industriesauger R104 V 4031600000, R104 X Product number: 4031600006 The industrial vacuum cleaners in the R series are designed to vacuum up and compress trimmings, cutting dust, and manufacturing waste of all kinds (plastics, paper fragments, or fabric scraps) in order to be able to return them to the recycling loop. Originates from a cleanroom manufacturing process, plastic granules. Industrial vacuum cleaner for compressible material. The industrial vacuum cleaners in the R series are designed to vacuum up and compress trimmings, cutting dust, and manufacturing waste of all kinds (plastics, paper fragments, or fabric scraps) in order to be able to return them to the recycling loop. • Reduces downtime through continuous cleaning Lodsw D Upzjpfx Abnjac • Compression and easy removal of the collected material • Dust removal from the work environment • Recycling of trimmings • Flexible due to different performance classes • Container sizes, maintenance-free • Simple monitoring • Unattended operation possible. Nilfisk industrial vacuum cleaner R104 V 4031600000 Article number: NILFISK-4031600000 R104 X Product number: 4031600006 The industrial vacuum cleaners in the R series are designed to vacuum up and compress trimmings, cutting dust, and manufacturing waste of all kinds (plastics, paper fragments, or fabric scraps) in order to be able to return them to the recycling loop. Industrial vacuum cleaner for compressible material The industrial vacuum cleaners in the R series are designed to vacuum up and compress trimmings, cutting dust, and manufacturing waste of all kinds (plastics, paper fragments, or fabric scraps) in order to be able to return them to the recycling loop.

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, power: 8.2 kW (11.15 HP), suction capacity: 6,000 m³/h, intake manifold diameter: 300 mm, For sale: Ledpfx Abezap Ezonsac Felder RL 300 industrial dust extraction system in very good condition. The machine was delivered new in 2022 and has always been located in a well-maintained interior design workshop. The system functions perfectly and can be used immediately in a furniture workshop, carpentry factory, or interior design workshop. Specifications: Brand: Felder Type: RL 300 Year of manufacture: 2022 Condition: good working order Design: industrial dust extraction system with filter system Mobile, on wheels The machine is sold without extraction ducts and pipes. Only the base unit as shown in the photo is included. Suitable for connection to multiple woodworking machines, such as: CNC machines Panel saws Edge banding machines Planing machines Milling machines The machine can be viewed in Rijnsburg – by appointment. Transportation is the responsibility of and arranged by the buyer. Available from mid-July. Asking price: €9,250 excluding VAT.

Condition: used, Year of construction: 2002, total height: 2,900 mm, total length: 4,300 mm, total width: 1,500 mm, Colour: Grey - Year: 2002 - Documentation available: No - CE certificate present: No - Capacity [m³/h]: 5500 - Number of filter bags [pcs]: 48 - Filter length [mm]: 2000 - Filter diameter [mm]: 230 - Filter surface area [m²]: 73 - Connection diameter [mm]: 310 - Number of connections [pcs]: 1 - Main fan [pcs]: 1 - Main fan power [kW]: 4.0 - Extinguishing system: Yes - Disassembled: Yes Lsdpsw Hcd Sefx Abnjac - Control cabinet present: Yes - Collection bags: Yes - Number of bins/bags [pcs]: 3 - Voltage [V]: 400 - Fuse [A]: 16 - Power [kW]: 4.0 - Transport dimensions: 4300mm x 1500mm x 2900mm (l x w x h) - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), mileage: 851,000 km, power: 228 kW (309.99 HP), first registration: 11/2006, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel-air, total length: 8,500 mm, total width: 2,500 mm, total height: 3,500 mm, loading space volume: 16 m³, Year of construction: 2006, Equipment: ABS, differential lock, electric window regulation, = Additional Options and Accessories = - Differential lock - Refrigerator - Air suspension - Air-suspended seats - Air horn - Radio/CD player - Rotating beacon - Sun visor - Power take-off (PTO) - Central lubrication system = Notes = STEERING AXLE REAR, WITTIG VACUUM PUMP, DUTCH REGISTRATION = Further Information = Ljdpfx Abszaq R Sjnsac Front axle: Steerable; Tire tread depth left: 50%; Tire tread depth right: 50%; Suspension: Leaf spring suspension Rear axle 1: Double-tired; Differential lock; Tire tread depth left inner: 50%; Tire tread depth left outer: 50%; Tire tread depth right inner: 50%; Tire tread depth right outer: 50%; Reduction: single reduction; Suspension: Air suspension Rear axle 2: Lift axle; Steerable; Tire tread depth left: 40%; Tire tread depth right: 40%; Suspension: Air suspension Number of cylinders: 6 Technical condition: very good Optical condition: very good

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 230 V, suction capacity: 1,200 m³/h, total height: 610 mm, total length: 800 mm, total width: 625 mm, overall weight: 100 kg, The LTA E 120 air filter extraction system is an electrostatic filtration system specifically designed for the separation of oil and emulsion mists in industrial applications. Such systems are characterized by consistently high separation efficiency and contribute to sustainable production. A key feature of LTA filtration systems is the automatic cleaning in place (CIP) system, which ensures consistently high filtration efficiency and long-term operational reliability. This system automatically cleans the filter elements with the cooling lubricant used in the machine, without the use of chemical additives or diluted solutions. Lasdpfx Asv S E H Ujbnoc

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, suction capacity: 1,200 m³/h, total height: 2,970 mm, total length: 930 mm, total width: 930 mm, overall weight: 250 kg, LTA (JUNKER Group) mechanical dust filtration systems capture and remove dust and fumes in industrial applications. They use cartridge or bag filters to reliably capture even the finest particles. Thanks to automatic filter cleaning, they offer consistently high separation efficiency and are available as mobile or stationary systems. Lajdpev S E Ncsfx Abnsc

Condition: excellent (used), Year of construction: 2022, Holzkraft Raw Air Extraction System Type: ASA 7703 For milling, planing, and saw chips (not suitable for dust) The 180° rotatable extraction unit allows suction guidance from below or above Robust metal impeller Equipped as standard with a high-quality mobility kit for increased stability and easy maneuvering Quick-release fasteners for filter and chip bag Dimensions and Weights: Length (approx.): 1900 mm Width/Depth (approx.): 670 mm Height (approx.): 2800 mm Net weight (approx.): 88 kg Chip collection volume: 2 x 290 l Outer diameter of inlet extraction nozzle: 260 mm Outer diameter of outlet extraction nozzles: 3 x 120 mm, 1 x 100 mm Electrical Data: Motor speed: 2950 rpm Connection voltage: 400 V Ljdpoy Ahpxsfx Abnoac Power supply frequency: 50 Hz Input power: 4.8 kW Output power: 3.8 kW Filter: Filter area: 2 x 5.98 m² Noise Emission: Maximum sound pressure level: 98.3 dB(A) Airflow: Nominal airflow: 7700 m³/h Maximum negative pressure: 2800 Pa Location: Available from stock, 54634 Bitburg - Immediately available -

Condition: used, Year of construction: 2010, power: 15 kW (20.39 HP), volume flow: 8,000 m³/h, actuation type: electric, We are offering this used Hurrican HF 3-355 Direkt stationary extraction unit, year of manufacture 2010. Machine type: HF 3-355 Direkt Ledpfx Ajzb Immebneac Airflow: 8000 m3/h Max. total pressure: 3550 Pa Motor power: 15 kW Motor type: 160 M2/B3-85 Operating speed: 2950 rpm Housing position: R0 0 Suction side design: 355 FEF Pressure side design: 350 B Year of manufacture: 04/2010 If you have any questions or need more information, please send us a message or call us.

Condition: used, Dust suction hood 160 mm Lasdoyi Ht Uspfx Abnjc Motor output 1,5 kW Dimensions (L/W/H) 1.220 x 650 x 3.270 mm

Condition: used, Connections: 3 x 140 mm // 2 x 80 mm // 1 x 120 mm Main pipe: 280 mm Extraction manifold with 6 connections and electric slide valve. The slide valve requires repair. Lajdpfx Abewwkg Njnsc

Condition: used, Welding fume extraction, filtration unit, dust extraction by LINCOLN NORWELD Central extraction system, extraction plant, silo filter, cartridge filter, pulse jet filter, dedusting filter Type FU-80-A Serial no. 001799 Year of manufacture: 1996 Airflow rate max. 6000 m³/h (depending on fan capacity) Filter area 80 m² (4 units of 20 m² each) Extraction inlet at filter entry Ø 250 mm Exhaust outlet at filter exit Ø 250 mm Compressed air connection 4 bar - without fan, without filter control - Filter category C, 99.9% separation efficiency - Pneumatic filter cleaning - Filter inlet with pneumatic shut-off valve - 4 used filter cartridges, Ø 325 mm, length 1200 mm - Service access hatch 240 x 240 mm Space required (L x W x H): 1400 x 1600 x 2970 mm Weight: approx. 300 kg In good condition Laedpfxsxf Up Ij Abnsc

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 06211785, For sale due to purchase of a more powerful extraction unit: ITALSIME VFQ 630/ES 18.5 kW motor, including snail housing and chimney with 50 cm diameter – electrical control panel included. Outdoor motor – nevertheless always stored under a protective canopy. Lsdpfx Ajykkgnjbnoac

Condition: used, - Chip container: included Ledpfszav Uiex Abnoac

Year of construction: 1994, condition: good (used), Load capacity: 120 kg Lasdpfxozbbdls Abnjc Width: 450 mm Height: 360 mm Depth: 220 mm Weight: approx. 12 kg Condition: good, second-hand

Year of construction: 2002, condition: good (used), Load capacity: 125 kg Lifting motor with chain hoist, manufactured by Demag. Operated via HUBFIX. Width: 450 mm Lsdpfxozba Txe Abnjac Height: 360 mm Depth: 220 mm Weight: approx. 12 kg Condition: good, second-hand