Used Suction for sale (2,431)

Condition: new, Year of construction: 2026, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, volume flow: 3,600 m³/h, suction capacity: 2,600 m³/h, noise level: 79 dB, total height: 2,200 mm, total length: 1,000 mm, total width: 800 mm, overall weight: 200 kg, warranty duration: 12 months, Dust extraction system for double mitre saws or saws used in aluminum processing, e.g., Emmegi / Elumatec / Mecal / FOM / Rapid / Pertici, etc. If you are looking for a high-performance and quiet dust extraction system, you have come to the right place. Alternatively, there is a pre-control unit including a switch for your double mitre saw, which operates via a potential-free contact. The dust extraction system is ideally suited for aluminum / PVC / steel. Very high-performance and extremely quiet dust extraction system with a noise level below 80 dB! 2600 m³ per hour suction capacity Ibjdpswii Hxsfx Ap Djc 3 kW motor The dust extraction system includes a 15-meter hose with 2 outlets.

Condition: new, Clean air dust collector AL-KO POWER UNIT 350 P-FU with compressed air cleaning and frequency inverter Iodpfx Apsxpximj Debc Start-up with frequency inverter, pressure transmitter for demand-based control ----- Technical Data ----- Suction nozzle Ø: 350 mm, Nominal volumetric flow: 6,927 m³/h, Max. volumetric flow: 8,500 m³/h, Max. negative pressure: 2,543 Pa, Filter area: 73 m², Chip collection volume: 3 x 250 liters, Number of bags: 3 pieces, Motor 400 V: 11.0 kW, Dimensions (L x W x H): 3,337 x 1,058 x 2,361 mm, Sound pressure level: 71 dB(A), Weight: 999 kg, according to: GS - HO - 07

Condition: excellent (used), Year of construction: 2021, Ref:11155 . 2021 Horizon Stitchliner Mark III Latest generation, fully automatic setting Sheet Collating and Saddle Stitched Booklet System. Isdpsz Hz Evsfx Ap Dsbc Features: Simple, fast set-ups by non-specialist finishing operators Works from flat-sheet 4-page sections No need to pre-fold Integrated automatic set-up 3-knife trimmer High quality books with sharp spine definition Comprising: 30 station (1 x VAC 1000Ha + 2 x VAC 1000Hm) 10 station tower suction collators with touch-screen control, double- and miss-sheet control. ST-40 stacker to Accumulator/Folder ACF-40 with double gate-fold to; SPF-40 Saddle stitcher with 2 x Hohner 43/6S stitching heads to; HTS-40 Three knife trimmer PK-30 Kicker Shingle delivery belt. Specification: Max sheet size: (Portrait: 356 × 508mm) (Landscape: 267 × 610mm) Min sheet size: 140 × 194mm Finished booklet size (approx): Max: 352 × 303mm Min: 120 × 85mm Typical formats: A3, A4, A5, B4, B5 Paper weight: Uncoated: 52–350 gsm / Coated: 73–350gsm Max stitch thickness: 5mm Equivalent to ~10mm booklet thickness (~50 sheets of 80gsm) Loop stitching: Max ~3mm stitch thickness Wire size: Typically 0.4 – 0.6mm (No.24–27 range) Trim width: 2 – 25.4mm Max trim thickness: 10mm Max speed: Up to 6,000 booklets/hour A4 landscape: 5,300/hour

Condition: used, Year of construction: 2015, workpiece length beliebig mm work piece width 1500 mm Sanding height max. 100 mm speeds of grinding spindle 400-1600 stufenl. U/min feed stepless 1 - 5 m/min rated capacity 4 x 2,2 KW Dust suction hood 200 mm total power requirement ca. 9 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 1,9 x 2,4 x 1,9 m Deburring and chamfering system for stamped and laser-cut parts. The Discmaster 4Td is equipped with two large deburring discs and two chamfering discs, which oscillate multiple times over the entire workpiece.|This unique technology enables cost-effective chamfering of stamped and laser-cut parts and offers significant advantages over conventional machines. Machine: 2 disc units on the infeed side, Ã? 250 mm, 2.2 kW drive, separate height adjustment - 2 disc units on the outfeed side, Ã? 250 mm, 2.2 kW drive, separate height adjustment - Transverse oscillation of the disc units perpendicular to the feed direction, 2.2 kW gearmotor - Robust linear guide for oscillation - Enclosed machine housing - 4 spring-loaded, rubber-coated hold-down rollers - Conveyor belt feed - Constant table height (passage height) - Pneumatically controlled conveyor belt centering - Guidance of the entire grinding unit via 4 heavy-duty round guides and trapezoidal lead screws | - Strip brush for conveyor belt cleaning - Includes stepless speed control for the cutting units - Includes cleaning brushes, rotating, Ã? 120 mm, width 1500 mm Ibedsz I Ucdspfx Ap Dsc - Overfeed protection flap for workpieces that are too thick - Motorized workpiece thickness adjustment For small parts starting at 20 x 20 mm up to material widths of 1500 mm

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 880 mm, travel distance Y-axis: 1,360 mm, travel distance Z-axis: 700 mm, table width: 1,110 mm, table length: 1,610 mm, overall weight: 12,500 kg, number of axes: 4, This 4-axis OPS INGERSOLL Gantry Eagle 1200 Plus was manufactured in 2014. It features a robust weight of 12,500 kg and includes a rotary tool changer magazine with multiple electrode holders. If you are looking to get high-quality die-sinking capabilities, consider the OPS INGERSOLL Gantry Eagle 1200 Plus machine we have for sale. Contact us for further details. Ibjdpfxez Nhkle Ap Djc - Control system: Eagle Powertec PC/NC Steuerung 3060 (22" Touchscreen display, Multiprog Powertec technology programming, Powertec 2 Easy Burn fast programming, Powertec Handheld, Ethernet and USB interfaces, MultiControl light remote maintenance)- Fine finishing generator: Eagle Powertec PT60- Z-axis speed: Eagle Power Jump with 18 m/min interval speed in Z-axis- Travel X / Y / Z: 880 x 1360 x 700 mm- Distance table / chuck min./max.: 440 / 1140 mm- Worktable dimensions: 1110 x 1610 mm (table clamping surface recessed 50 mm compared to standard)- Dielectric height: 960 mm (Option: 1000 mm)- Special telescopic working tank (W x L x H): 1140 x 1640 x 1040 mm- Max. head load: 300 kg- Additional dielectric fluid capacity: 2000 l (Total 4800 l with extra tank and connecting hoses)- Electrode changer: EW30 (30-fold) / 13-fold base unit- Measuring system: Linear measuring system in X and Y-axis (already included in Z-axis)- Electrode clamping system: Hirschmann H5000 / Minifix (H8.11.20)- Energy saving function: ECOTEC- Flushing: Programmable pressure flushing, manual suction connection- Filter system: 32 m² paper candle filter- Cooling: Compressor re-cooling unit- Main voltage: 400 V3~ / 50Hz- Control voltage: 24 VDC- Max. fuse: 32 A- Power consumption: 20 kVA- Total weight: approx. 12,500 kg (Machine base: 10,000 kg, Gantry/Portal: 2,500 kg, Extra tank: 1,100 kg)- Additional features: C-axis without chuck, CO2 fire extinguishing system, T-slot plate for large electrode mounting, machine shoes, preparation for external erosion mist extraction nozzle, fire damper, structural paint finish in Cobalt Blue (RAL5013), Telegrey (RAL7045), and Rape Yellow (RAL1021)

Condition: good (used), Year of construction: 1997, functionality: fully functional, 4-AXIS CNC MACHINE FROM A PART-TIME JOINERY, VERY GOOD CONDITION Workpiece dimensions max.: Length 3,000 mm Width 1,050 mm Thickness 60 mm with standard clamps 120 mm with clamping templates (customer-supplied) 2 clamping stations for machining 2 identical workpieces, resulting in halved changeover times 6 clamping consoles with tubeless vacuum guidance 12 vacuum suction cups Machine zero point at the front left Chip conveyor belt Main spindle 7.5 kW, HSK 63 F S1 incl. stepless speed control 1,500 - 18,000 RPM C-axis for main spindle Tool changer magazine, 12-position, mounted on the support and moving with the X-axis Ibsdpfx Apsz H Na Is Dec Drilling head, 17 spindles, vertical, 7,500 RPM Spindle spacing 32 mm Drilling head, horizontal, 4 spindles Control system: ----- HOMATIC NC 83 Operating system OS-9 with WINDOWS interface WOODWOP 4.5 Connection values: 380 V / 50 Hz Control voltage: 220 V 50 Hz Additional accessories: ----- Anti-slip mats in front of the machine Adapter unit for saw with 2 outlets Maintenance performed: - Main spindle completely overhauled in 2019, since then max. 100 hours of use - X-axis bearings completely new - Water hoses partially replaced - New vacuum pump Becker - Cooling unit for main spindle new

Condition: used, Year of construction: 2003, functionality: fully functional, type of input current: three-phase, overall weight: 1,100 kg, input voltage: 400 V, total width: 1,650 mm, total length: 2,000 mm, total height: 4,000 mm, filter area: 140 m², suction capacity: 3,800 m³/h, negative pressure: 3,500 Pa, Dust extraction unit, fume extraction for welding, self-cleaning filter, suitable for plasma cutting, laser cutting, sandblasting, shot blasting, and all types of dry dust. Iodpfxozlzv Ij Ap Djbc The filter is pneumatically cleaned with compressed air pulses during operation, resulting in high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Year of manufacture: 2003 Motor power: 7.5 kW Capacity: 3800 m3/h Inlet diameter: 280 mm Filter cartridges: 9 pcs. Filtration area: 140 m2 Fire damper Noise silencer Dimensions: Height: 4.00 m Width: 1.65 m Depth: 2.00 m Base: 1.33 m x 1.84 m Stock number: 1148

Condition: excellent (used), Year of construction: 2008, Schuko Vacomat 300 – Year of manufacture: 2008 – In excellent condition – Performance: 7.5 kW (10.20 hp) Input voltage: 400 V Input current: 15 A Input frequency: 50 Hz Volume flow rate: 5,800 m³/h Iedsz Eub Ispfx Ap Dsbc Suction pressure (max.): 38 mbar Suction capacity: 5,800 m³/h Suction pipe diameter: 300 mm Total weight: 830 kg Features: CE marking Location: available from warehouse 54634 Bitburg – immediately available –

Condition: as good as new (ex-display), Year of construction: 2026, SRF Maxi. (Image on the right) 3 m extraction arm Application area Medium amounts of smoke/dust Regular use Benefits Low need for repositioning the extraction hood Contamination-free filter change Safe operation thanks to rotary field detection High cost-effectiveness due to long filter service life Features Safe operation through filter monitoring Extraction hood can be rotated and swiveled 360 degrees Start/stop automatic (optional) Workplace lighting (optional) Technical data Process: 2-stage Filter type: Disposable filter Filter area: approx. 20 m² Separation rate: > 99% Filter material: Polyester fleece Welding fume separation class: W3 Additional filters: Pre-filter (aluminum mesh) Basic data Extraction capacity: max. 1,100 m³/h Diameter of extraction arm: Ø 150 mm Length of extraction arm: 3 m Diameter of suction connection: Ø 150 mm Power connection: 3 x 400 V / 50 Hz Motor power: 1.1 kW Ijdpfjdqzcvex Ap Debc Sound pressure level: 70 dB(A) Dimensions (W x D x H): 790 x 815 x 1080 mm Weight: approx. 71 kg / approx. 120 kg

Condition: new, Year of construction: 2026, Weima Hacker/Shredder WL 8 with Top Equipment - Four-sided segment floor, discharge auger with geared motor, double blade row, log spacer, fast reverse hydraulics with shock valve The single-shaft shredder WL 8 is a proven classic for shredding wood waste of all kinds. It is used thousands of times in wood processing companies worldwide. The high number of these highly sought-after shredders guarantees a proven and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures extremely high durability (even outdoors). Intuitive operation thanks to Siemens PLC control with touch display To ensure that the electronics are optimally adapted to the machine, we design, build and wire our control cabinets ourselves. We use only high-quality components – for example, from Siemens or Rittal. Intuitively operated touch interfaces guarantee quick adjustments. Functions such as setting the slide timing or stop ensure a high throughput. The built-in overload protection also prevents damage to the machine. No material bridging thanks to self-cleaning hopper design The hopper performs several tasks. First, the material to be shredded is fed into it – manually, mechanically or via a conveyor belt. The generous opening also makes it easy to fill in very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridging, is decisive for the shredding process. Even with bulky parts, the shredder cuts itself free. If required, both hopper extensions and lids with gas springs are available. Durable rotor bearings thanks to offset design A rotor bearing must be particularly robust due to the extreme stress it is subjected to during the shredding process. To prevent dust or foreign matter from entering its interior, we have separated it from the machine frame. This also makes it very easy to maintain and access. Rotor diameter (mm): 260 Rotor length (mm): 1000 Rotor speed (RPM): 80 - 125 Power (kW): 22 Number of blades: 54 Available blade sizes (mm): 40 x 40 Particle size (mm): Suction nozzle (mm): 200 Feed opening (mm): 1000 x 1250 Length (mm): 2045 Width (mm): 1740 Height (mm): 1840 Weight (approx. kg): 2200 Screen size: 15/20 Accessories: - 2nd blade row - Log spacer - Four-sided segment floor Ijdpfsmhh Idex Ap Dsbc - Discharge auger with geared motor - Fast reverse hydraulics with shock valve Location: Available in warehouse 54634 Bitburg

Condition: used, Year of construction: 2013, .30 Base machine ACCORD 30 FX N. 1 CONCEPTCNC machining center with a moving gantry and a fixed worktable for processing various sheet-like materials: chipboard, MDF, laminated solid wood, plastic materials, and light alloys. STRUCTUREThe machine is developed using the best three-dimensional CAD systems for solid modeling. The machine bed and moving crossbeam represent the two main elements of the machine structure and are manufactured in the company's own foundry. All mechanical machining operations are carried out on special production equipment in a single setup to ensure optimal precision and to minimize tolerances during machining. The control cabinet is mounted directly on the machine bed, allowing for a very compact design and easy access. CONTROL UNITThe control unit consists of an industrial NC control system with an integrated office PC (desktop computer). The CNC solution with an office PC combines all the features of numerical control with the typical user-friendliness of an office PC, which greatly simplifies the control of the machine by enabling the use of the XILOG MAESTRO user interface, i.e., the software developed by SCM for simple and fast programming, even for non-experts. GENERAL FEATURESPassage height: - 250 mm with H50 accessories- 190 mm with H110 accessoriesPendulum machiningAutomatic lubrication of the axesAir conditioning system to maintain the correct internal temperature in the control cabinet. Software for remote customer serviceOperator interface Xilog MAESTRO with integrated CAD/CAM, which allows for the extremely simple execution of products even with special shapes.A number of advanced functions allow for: - programming via macros- creating and managing subprograms- optimizing machining- managing all machine functions- creating and managing a database of tools93.07.31 Voltage 400 EU 93.12.01 Frequency 50 Hz R0.00.03 LINGUA P.C. GERMAN 02.12.57 ACCORD 30 FX - Worktable X-Y = 3680x1380 56.05.25 No. 6 Support rail MATIC - L1300 The worktable is equipped with: - no. 2 lateral fixed supports- no. 6 aluminum supports, motor-driven and movable along the X-axis- motorized conveyor belt for unloading chipsEach movable support has: - no. 3 motor-driven support rails for clamping cylinders and vacuum suction cups- air blower for cleaning on each movable support- pneumatic locking/release for quick replacement of the clamping cylinders and vacuum suction cups- preparation for lifting devices- preparation for reference stopsThe workpiece vacuum clamping system is divided into 2 independent worktables.23.02.19 DUO Prisma K working unitThe working unit with 5 interpolating axes is located on the moving crossbeam, which provides maximum stability during milling and thus also ensures optimal machining quality of the workpieces, even with high material removal rates. It allows for rotation around the axes arranged at 50° to each other and has many advantages over traditional 5-axis working units, such as: - the full use of the work areas both with 5 axes and with a vertical spindle- spindle external dimensions outside the working area- a particularly light design for horizontal machiningThe unit has a central chip extraction system. Ibsdpfxozl Ap No Ap Doc

Condition: used, Year of construction: 2006, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm control: HEIDENHAIN iTNC 530 power capacity - milling spindle: 28 / 19 kW tool taper: HSK 63 Tool changer: 40 pos. rotary table diameter: 900 x 700 mm table load capacity: 1.400 kg turning speeds: 12.000 1/min rapid traverse: 60 m/min : 62 kVA weight of the machine ca.: 13 t dimensions of the machine ca.: 4,1 x 3,2 x 3 m 5-axis simultaneously machining center, NC-round-table, B-axis, internal coolant supply 40 bar 600l incl. paperfilter, chipconveyor, mode 4, ROTOCLEAR, 3 D touch probe HEIDENHAIN TS 641 (defect), air blast through spindle, el. handwheel, Ibedpfx Apjz Rn E Ee Doc BLUM laser, flushgun, oilmist suction, accessories: toolholders, clamping tools, vices (see photo) approx. 64.300h "machine on", approx. 25.700h "spindle on" in total, last spindle change in 2019 *

Condition: used, Year of construction: 2012, Dust collector JP 300-L with briquetting press CS 3-12-R Year of manufacture: 2012 Equipment: Dust collector Briquetting press Technical data: Vacumobil JP 300: Nominal volumetric flow rate: 5100 m3/h Maximum volumetric flow rate: 6000 m3/h Pressure difference at nominal volumetric flow rate: 2700 Pa Pressure difference at maximum volumetric flow rate: 2200 Pa Filter area: 28.0 m2 Suction nozzle: 300 mm Nozzle height: 1215 mm (center) Fan motor: 7.5 kW On-site fuse protection: 32 A Compressed air connection: 1" Operating pressure: 4.5 bar Compressed air consumption: approx. 120 NL per pressure pulse with a pulse duration of 150 ms Sound pressure level: 75.0 dB Weight: 900 kg Briquetting press CS3-12: Throughput capacity max. 50 kg/h or 0.75 m3/h (material-dependent) Hydraulic pump motor: 3.0 kW Ibjdpfxez Rrbke Ap Djc Mixer motor: 0.37 kW Metering screw motor: 0.75 kW On-site fuse protection: 16A Briquet diameter: 65 mm Weight: 780 kg Storage container: 1200 x 1200 mm Overall external dimensions: 3150 x 1625 x 2742 mm Space required: 4500 x 3000 x 2900 mm Location: NRW (North Rhine-Westphalia) Availability: approx. June/July 2027

Condition: excellent (used), For sale: professional EXpressO vacuum lifter, German-made. This device is designed for lifting and transporting flat items using vacuum technology. Model features increased lifting capacity up to 70 kg, equipped with PIAB components and four large suction cups ensuring stable and secure handling. Ideal for working with glass, sheet metal, panels, and other flat elements in industrial settings and warehouses. Technical specifications: Manufacturer: EXpressO Deutschland GmbH Type: Vacuum lifter Maximum lifting capacity: 70 kg Year of manufacture: 2012 Serial number: 2012 003 Model number: 060BLV1502162 Vacuum system: PIAB Number of suction cups: 4 Vacuum gauge Pneumatic connections Condition: Device in very good technical condition Fully operational both visually and mechanically Normal signs of use Complete as shown in the photos Applications: glass and window transportation sheet metal and panel handling Isdpfjz Slt Dox Ap Debc production lines warehouses and logistics Included in the set: complete vacuum lifter control handle air installation Shipping: Courier delivery available.

Condition: excellent (used), functionality: fully functional, For sale: an industrial submersible pump, ORPU Sonel B 60/2, manufactured in Germany, with a maximum flow rate of 80,000 liters per hour. This pump is designed for draining and pumping water. Technical specifications: Brand: ORPU Model: Sonel B 60/2 Maximum flow rate: 80 m³/h – 80,000 l/h Maximum head: 25 m Power: 5.2 kW Ibodjz Syk Aspfx Ap Dec Power supply: 400 V, three-phase Frequency: 50 Hz Manufacturer: Oranienburger Pumpen + Verdichter GmbH Country of origin: Germany The pump is equipped with a metal housing, a lower suction basket, a discharge connection with a quick-release coupling, a power cable, a float switch, and a carrying handle.

Condition: used, functionality: unexamined, For sale: Flygt 2051.160 submersible pumps, designed for water pumping and drainage applications. Maximum capacity is 18 m³/h, which equals 18,000 liters per hour or 300 liters per minute. Actual capacity depends on the lift height and operating conditions. The stated price applies to one unit. The three pumps shown in the pictures are sold separately. Technical specifications: Manufacturer: Flygt Model: 2051.160 Isdpfx Ajz S Ikwop Dsbc Maximum flow rate (Qmax): 18.0 m³/h – 18,000 l/h Power: 1 kW Rated voltage: 380/220 V Connection: star/delta Rated current: 2.4/4.1 A Three-phase motor Frequency: 50 Hz Rotational speed: 2850 rpm Operating mode: S1 – continuous operation Power factor cos φ: 0.89 Insulation class: F Weight: approximately 25 kg Manufactured in: Sweden Equipment: Carrying handle Lower suction basket Side discharge nozzle with hose connection Power cord The pumps are used, with visible signs of wear, dirt, and paint coating damage. The visual condition and equipment are shown in the pictures. The item for sale is one pump. Price per unit.

Condition: excellent (used), functionality: fully functional, For sale: an industrial KSB ETABLOC-MN 32-200/752 centrifugal pump with a 7.5 kW electric motor. It features a monobloc design with an axial suction nozzle and a vertical discharge nozzle, both equipped with flanged connections. The rated capacity is 18 m³/h, or 18,000 liters per hour, at a head of 62 m, as indicated on the pump nameplate. Pump data: Manufacturer: KSB Model: ETABLOC-MN 32-200/752 Rated capacity Q: 18 m³/h – 18,000 l/h Head H: 62 m Rotational speed according to the pump nameplate: 2940 rpm Year of manufacture: 1992 Nameplate number: 4-925-177653/1 Motor data: Power: 7.5 kW Rated voltage: 500 V, delta (Δ) connection Ibsdpsz S I Hxefx Ap Djc Rated current: 11.8 A Frequency: 50 Hz Rotational speed: 2910 rpm Protection class: IP54 Insulation class: F Power factor cos φ: 0.84

Condition: excellent (used), functionality: fully functional, For sale: PUMPEX PC 2001 H industrial submersible pump with a 5.8 kW three-phase motor and a flow rate of 70,000 liters per hour (70 m³/h). Robust construction with a lower suction basket, an upper discharge connection with a quick coupling, and a carrying handle. Technical specifications: Manufacturer: PUMPEX AB, Sweden Model: PC 2001 H Motor power: 5.8 kW Flow rate: 70,000 l/h – 70 m³/h Power supply: 400 V, three-phase Rated current: 12 A Ibodpfx Apoz Sr T Ne Djc Rotational speed: 2830 rpm Maximum immersion depth: 20 m Insulation class: F Included: pump, power cable, connection module with a power socket, and a discharge connection with a quick coupling. Condition: used, with visible signs of wear, scratches, paint chips, and localized corrosion. Visual condition and accessories are shown in the photos.

Condition: excellent (used), Wide belt sander for calibration and fine sanding Working width 1100 mm Min. / max. workpiece height 3 - 120 mm Feed motor power 0.8 kW Sanding belt speed 18 m/sec Sanding belt dimensions 1115 x 2620 mm Feed speed 4.5 / 9 m/ min Suction connection 3 x 160 mm Iedpfxotwzyfj Ap Dsbc Compressed air connection 6 bar 1st unit Sanding roller rubber-coated 90 Sh Motor power 11 kW 2nd unit Combi unit Rubber-coated sanding drum 60 Sh Sanding pad, rigid Motor power 11 kW 3. cleaning brush unit Automatic workpiece thickness adjustment at infeed with digital workpiece thickness display Table extension in the outfeed Dimensions approx. L x W x H = 2291 x 1784 x 2350 mm Weight approx. 3000 kg Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: new, Thin layer from 2 mm thickness Maximum cutting accuracy up to ± 0.15 mm Minimal kerf, cutting thickness from 1.3 mm Ideal for the cutting of dried and wet wood or alternative materials Surface of the thin layer ready for gluing without need of further processing steps Friendly user electronic control Two programmable speeds of the carpet (0-30 m/min) for the best cutting quality and to safeguard the blade life Optical sensor to start cutting cycle and speed change Ground table “Flexam” belt feeding for the best performance 6 rubber idler rollers adjustable in height, for opening/closing to ensure the best pneumatic pressure on the workpiece during feeding and cutting Oleo-pneumatic tensioning of the blade for better cutting performance Top and bottom ‘’Chaco’’ blade-guides which guarantee the best stability blade during cutting Internal/external lubrication of the blade to remove residues of resins and chips 4 dust extraction to optimize the suction of dust and chips Cutting height of 400 mm (500 mm optional) Cutting width up to 400 mm High quality powerful motor kW 15 (HP 20) Ethernet connection for on line service Carbide or stellite blades for best cutting performance DM of saw wheels mm 800 Max. cutting height mm 400 fixed working table mm 1290 x 800 Max. saw blade width mm 54 x 0,9 Max. & min. saw blade length mm 5530 / 5380 motor Kw 15 (HP 20) suction connection nr 2x Ø 120 & 1 x Ø 100 compressed air requirement bar 6/ 27 ltd machine weight Kg 880 feed speed m/min 0 - 30 height of feeder belt mm 300 length of feeder mm 750 Iedpfx Apsdcd Dlj Djbc feeder roller DM mm 160 Max. feeder opening mm 200 Max. fence opening mm 200 feeder speed var. mt/ min 0-30

Condition: excellent (used), Year of construction: 1999, cutting length 3.200 mm cutting width 3.200 mm cutting hight 65 mm saw blade DM max. 300 mm saw blade motor: 5,5 kW scoring unit DM max. 160 mm motor scoring unit 1,5 kW front support tables 3 Stk. 1 x 2500 x 500 & 2 x 1500 x 500 mm cutting optimisation program no. of grippers 8 pcs saw blade hight adjustment on THK guides pressure beam with openings side pusher (alignment) saw blade quick change system suction DM1 x 120 & 1 x 150 mm space requirement L x B 5700 x 6000 mm weight approx. 2500 kg INVERTER NEW Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. Ibedpohvan Isfx Ap Dec (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Year of construction: 2004, operating hours: 292 h, overall weight: 160 kg, For sale: Stolzenberg TTE 1000 sweeper. The Stolzenberg TT E 1000 is a self-propelled, battery-powered sweeper designed for daily cleaning of large indoor areas (up to 8000 m²), such as parking lots, small production halls, and showrooms, etc. The integrated suction system allows for the removal of dust and fine dirt, even from textile surfaces (carpets, rugs). The sweeper operates using two disc brushes (side brushes) and cylindrical brushes made of abrasion-resistant polyamide. High-performance TRS sweeping system Main brush drive Forward/reverse drive – to the rear axle via a differential Separate drive for each rear wheel Robust frame construction, laser-welded, and exceptionally impact-resistant Rotational guards made of polyethylene Ergonomically positioned buttons Collects sand and fine dust Easy to operate Exceptionally large filter area and waste container Quick-change mechanism for rollers and side brushes Very maneuverable (turning radius – 1 m) Quiet operation Electric filter cleaning system Exceptionally easy access for service work Reliable chain transmission Highly efficient motor Ability to clean textile surfaces (carpets, rugs, etc.) Iedpfx Aez Sau Njp Djbc Approximately 50% larger cleaning area compared to a manually operated sweeper with the same sweeping width Categories: STOLZENBERG, Sweepers Electric drive – 24 V, 900 W Sweeping method TWS – two brushes Sweeping width – main brush (mm) 600 Sweeping width with 1 side brush (mm) 800 Sweeping width with 2 side brushes (mm) 1000 Drive transmission chain Brush drive yes Suction yes Airflow (m³/h) 600 Waste container (l) 70 Filter area (m²) 3 Filter cleaning system electric Theoretical performance (m²/h) 6000 Practical performance (approx. m²/h) approx. 70% of theoretical performance = 4,200 Max. speed (km/h) 6 Max. surface slope (%) 20 Dimensions – L x W x H (mm) 1190 x 790 x 1089 Weight (kg) 160 ID: 905240967

Year of construction: 2008, condition: used, functionality: fully functional, This is a combination steamer, also known as a convection oven, manufactured by Convotherm, model OGS 20.20, in a gas-powered version, direct injection, without a boiler, manufactured in 2008. The unit is set for natural gas; it can be converted to propane gas. The combination steamer is functional; videos can be sent upon request. The combination steamer is equipped with a trolley for 20 x 2/1 GN or 40 x 1/1 GN pans and includes 2 x 1/1 GN insert racks. The unit is sold without inspection or warranty, as received from the customer. An inspection will certainly be necessary for recommissioning. Wiring diagrams and documentation are included. Only frozen, ready-made meals have been heated/regenerated in this combination steamer. You will receive an invoice with VAT shown. Our used equipment service for you: High-quality branded equipment at fair prices Professional overhaul/inspection & expert cleaning Checked & fully functional Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating manuals, connection diagrams & spare parts Inspection according to DGUV V3 Technical data: W x D x H: approx. 1232 x 1055 x 1952 mm Power connection: V: 400 / kW: 2.2 Gas connection: kW: 70.0 Insert slots: 20 x 2/1 GN or 40 x 1/1 GN Weight: approx. 403 kg Year of manufacture: 2008 Condition: Used, no inspection Additional information: ACS Advanced Closed System (automatic energy-saving system, optimal humidity in the cooking chamber) Crisp & tasty (multi-stage cooking chamber dehumidification in ACS) Press & Go (image symbol) for quick selection of predefined cooking recipes Tray Timer (staggered loading) Start time pre-selection in real-time mode Night baking Delta-T baking (requires multi-point core temperature probe) Cook & Hold Programmable with 250 cooking recipes, each with up to 20 steps CONVOTHERM cookbook with pre-programmed cooking recipes Disappearing door: more space and improved workplace safety Double-glazed door with integrated door stop Antibacterial door handle latch with ventilation position and safety function Door handle latch with closing function Motor brake when opening the cooking chamber door: less steam escaping Fan with autoreverse function Handheld spray with stepless adjustment Multi-point core temperature probe Height-adjustable device feet Easy operation via menus/icons Bright graphic display Digital rocker switch for easy adjustment of temperature, time and core temperature Modular processor control with clear display and module self-check RS232 interface Storage of all device settings and cooking recipes in an additional memory module Ibjdpjz Smhiefx Ap Doc Permanent self-diagnosis for fault detection System with full-text error description Safety program mode: operation of the device with limited functionality is possible Basic prison version Robust design in stainless steel Seamless welded cooking chamber Rounded cooking chamber corners Suction plate easily removable Hygienic socket seal Cooking chamber lighting with shock-resistant glass cover Including loading trolley with condensate collection tray

Condition: excellent (used), Industrial submersible pump VEB Pumpenwerke Halle KRD 16-A/160/6 for sale, suitable for water pumping and dewatering applications. The pump has been inspected and is in working order, ready for use. Robust metal construction, lower suction basket, stable base, and discharge nozzle with a pin-type connector. Includes a power cable with an industrial plug and a chain, as shown in the pictures. TECHNICAL DATA: • Manufacturer: VEB Pumpenwerke Halle, GDR • Model: KRD 16-A/160/6 • Serial number: 5506576 • Power: 7.5 kW • Power supply: three-phase, 380 V • Rated current: 17 A • Frequency: 50 Hz • Performance range: 0–160 m³/h Ijdsz Sphgepfx Ap Djbc • Head range: 32–0 m • Rotational speed: 2810 rpm • Weight: 80 kg • Power factor cos φ: 0.9 • Insulation class: F • Maximum medium temperature: 40°C Maximum performance and maximum head do not occur simultaneously. CONDITION: Used, inspected, and in working order. Visible signs of use, dirt, surface wear, and superficial corrosion on the chain. The pictures show the offered unit and its actual visual condition.

Condition: good (used), Foldmaster 200 SA Automatic Folding Machine This is the latest product from the Swiss company Multigraf AG. The machine is in good working order and ready for production. Equipped with new rollers. Features 2 folding plates that are electronically adjusted via a control panel, allowing for very fast setup and high precision. Includes a pneumatic feed system and soundproofing. Comes with accessories, including: an operating manual and a creasing kit. Ideal for the pharmaceutical industry due to its small minimum fold size. Electric delivery system with infinitely variable delivery speed. Infinitely variable folding speed. Power supply: 230V. Becker compressor. Format: 35 x 55 cm. The control unit/counter performs the following functions: • setting a specific batch size; • setting the duration of the pause between individual batches of sheets; • displaying the total quantity of processed material; • displaying the operating speed (units per hour); • programming the suction duration; • programming the pulse duration for the spacing between sheets. Paper weight range: 40–240 g/m². Throughput (A4 format): up to 30,000 sheets per hour. Iedpfxsz S Uw Re Ap Djbc