Used Suction for sale (2,450)

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 4,500 kg, fuel type: electric, Shredding machine MRZ 1530, Main motor: 55 kW; 400 V - 50 Hz - 3 phase incl. turbo coupling Lrjdpfx Ake Aa Nq Teqeu Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3 phase Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control system: Siemens S7-1200 PLC Hopper opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 m³ hydraulically operated slide Screen opening: 12 - 15 mm Suction nozzle Ø 200 mm Weight approx. 4,500 KG Dimensions (l x w x h) approx. 2765 x 2520 x 1730 mm Turbo coupling Standard features include: - Profile rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput performance - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Special guides for hydraulic slide - Vibration-damping machine feet - CE compliant The shredder is designed for shredding untreated wood, chipboard, and MDF with a maximum hardwood content of 10% per hopper filling. If the hardwood content is higher, we recommend our MGZ series wood shredders. Other materials after testing and approval by the manufacturer. When shredding veneer or paper, a special scraper (at extra cost) is required to prevent the thin materials from getting under the hydraulic slide and causing it to jam. Requirements for the raw material: - The moisture content (oven-dry) must be below 14% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear - For an optimal shredding process, the material to be shredded must be pre-broken to a maximum of 140x80x30 cm before being fed into the wood shredder. The shredder is placed higher to prepare for the conveyor belt. The conveyor belt is not included!!!!!

Condition: used, Year of construction: 2020, operating hours: 288 h, functionality: fully functional, working width: 430 mm, area performance: 1,720 m²/h, overall weight: 115 kg, tank capacity: 25 l, total height: 1,025 mm, total width: 520 mm, total length: 1,135 mm, water tank capacity: 25 l, empty load weight: 40 kg, This used ride-on scrubber-dryer, model BD 43/25 C Bp Pack from Kärcher (year of manufacture: 2020 | operating hours: 288), has been technically refurbished and cosmetically restored in our in-house workshop. Among other things, new, maintenance-free gel batteries and new rubber squeegees have been installed. The disc brush has also been replaced. Lsdpfx Ae Aa Nccjkqjru The suction bar has been sandblasted and powder-coated with a new finish. The dirty water tank lid has been replaced with a new one. The BD 43/25 C Bp Pack is ideally suited for economical basic and maintenance cleaning of areas up to 900 m². Due to its maneuverability and ease of handling, it is also perfectly suitable for cleaning areas with obstacles. It is operated with a 24-volt battery, and a separate charger is included. The EASY-Operation system, with its characteristic yellow controls, ensures easy operation and very short learning times. Cleaning and maintenance work on the machine is equally easy to perform. Technical data: Working width, brushes: 430 mm Working width, suction: 750 mm Tank capacity, fresh/dirty water: 25/25 l Theoretical area performance: 1720 m²/h Practical area performance: 860 m²/h Permissible total weight: 115 kg

Condition: refurbished (used), Refurbished Multigraf Touchline CF375 Creaser Folder Availability: In Stock Condition: Fully refurbished - including a new Care Kit B, full new rollers, fold bar, feed belts, and various smaller internal components. Exceptionally low usage, with a lifetime sheet count of just 86,000. Overview The Multigraf Touchline CF375 is a premium creasing and folding system designed to produce professionally finished documents with exceptional accuracy, reliability and ease of operation. Manufactured in Switzerland, the CF375 combines precision engineering with fully automatic setup, making it one of the most highly regarded creaser folders available for commercial print finishing. Designed for commercial printers, digital print providers, universities and corporate print rooms, the Touchline CF375 creases and folds in a single pass while handling a wide variety of coated and uncoated media from 80 to 400gsm. Its patented Swing-Bar creasing system virtually eliminates fibre cracking, while the Pro-Knife folding technology delivers precise, repeatable folds across a broad range of applications. Lrodpfx Ao Abaq Tjkqsu Every refurbished Multigraf Touchline CF375 supplied by Glendale Presentation Solutions is professionally refurbished by our experienced engineers, fully tested and supplied ready for immediate production. Whether you're producing folded brochures, greetings cards, menus or premium marketing literature, the Multigraf Touchline CF375 delivers exceptional finishing quality with minimal operator intervention. Key Features Fully automatic creasing and folding system Top-fed vacuum suction feeder Multigraf Swing-Bar creasing technology Multigraf Pro-Knife folding system Automatic setup via colour touchscreen Crease and fold in a single pass Crease only or fold only operation Up to 20 creases and 2 folds per sheet Processes media from 80–400gsm Sheet sizes from 105 × 148mm up to 375 × 660mm (up to 1,050mm with extension) Production speeds of up to 6,000 sheets per hour High-capacity shingle delivery Job memory for repeat work Choice of standard and narrow crease tools Swiss manufactured Why Choose the Multigraf Touchline CF375? The Multigraf Touchline CF375 has earned an outstanding reputation throughout the print industry for its exceptional build quality, reliability and finishing quality. Manufactured in Switzerland, it combines precision engineering with innovative creasing and folding technology to deliver professional results day after day. Its patented Swing-Bar creasing system produces crisp, professional creases without stopping the sheet, significantly reducing the risk of fibre cracking on digitally printed and coated stocks. Combined with Multigraf's Pro-Knife folding technology, the CF375 delivers accurate folds and excellent registration while maintaining high production speeds. Automatic setup via the touchscreen control panel dramatically reduces make ready times, allowing operators to switch quickly between jobs with minimal manual adjustment. Whether you're producing folded brochures, greetings cards, menus, direct mail or premium marketing literature, the Touchline CF375 delivers the productivity, flexibility and finishing quality demanded by busy print environments.

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 219400 € 6 kW Wechseltisch 25 mm 15 mm 20 mm 10 mm 12 mm 4100 x 2070 mm 4100 mm 2070 mm 125 mm 4064 x 2032 mm 240 (für 3 - 12 kW) / 400 kg/m² 3900 (für 3 - 12 kW) / 64 kg 100 m/min 100 m/min 141 m/min 14 m/s² +/- 0,05 mm +/- 0,05 mm 32 s The HD-FN has two tables which are automatically switched alternately to enable simultaneous cutting and loading/unloading. The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems. Control, laser source and cooling are integrated into the machine. The cutting head has automatic focus adjustment. The system consists of the following components: Shuttle table (positioned longitudinally for best possible accessibility for optional loading and unloading systems) Encapsulated cutting room with protective glazing CNC graphic control with touchscreen Laser source Brilase Premium Cutting head with automatic focus adjustment Integrated cooling unit for cutting head and laser source CAD/CAM software Lantek for programming including autonesting Positioning laser Sheet check system (automatic detection of sheet position and dimensions) Automatic nozzle cleaning Central lubrication Lredpfxex Urp Hs Akqeu Slug box Working area lighting Multi-chamber suction system Light barrier protection for the changing table Remote maintenance access Air condition for electrical cabinet Equipped according to CE guidelines ALTERNATIVE LASER SOURCES: Material 6 kW 12 kW 15 kW 20 kW Mild steelS235 25 30 35 40 Stainless steel(304) 15 25 35 40 Aluminium (5083) 20 30 35 40 Copper 10 15 15 15 Brass(CuZn39 Pb3) 12 20 20 20 OPTIONS: Suction unit with filter Sheet handling systems Automatic nozzle change

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 185300 € 3502.17 € 6 kW Wechseltisch 25 mm Lrodpfxjx U Elbj Akqou 15 mm 20 mm 10 mm 12 mm 3100 x 1525 mm 3100 mm 1525 mm 125 mm 3084 x 1524 mm 240 (für 3 - 12 kW) / 400 kg/m² 2200 (für 3 - 12kW) / 360 kg 100 m/min 100 m/min 141 m/min 14 m/s² +/- 0,05 mm +/- 0,05 mm 25 s The HD-FN has two tables which are automatically switched alternately to enable simultaneous cutting and loading/unloading. The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems. Control, laser source and cooling are integrated into the machine. The cutting head has automatic focus adjustment. The system consists of the following components: Shuttle table (positioned longitudinally for best possible accessibility for optional loading and unloading systems) Encapsulated cutting room with protective glazing CNC graphic control with touchscreen Laser source Brilase Premium Cutting head with automatic focus adjustment Integrated cooling unit for cutting head and laser source CAD/CAM software Lantek for programming including autonesting Positioning laser Sheet check system (automatic detection of sheet position and dimensions) Automatic nozzle cleaning Central lubrication Slug box Working area lighting Multi-chamber suction system Light barrier protection for the changing table Remote maintenance access Air condition for electrical cabinet Equipped according to CE guidelines ALTERNATIVE LASER SOURCES: Material 6 kW 12 kW 15 kW 20 kW Mild steelS235 25 30 35 40 Stainless steel(304) 15 25 35 40 Aluminium (5083) 20 30 35 40 Copper 10 15 15 15 Brass(CuZn39 Pb3) 12 20 20 20 OPTIONS: Suction unit with filter Sheet handling systems Automatic nozzle change

Condition: used, Year of construction: 2023, Manufacturer: TEKA, Type: ZPF 9H, Year of manufacture: 2023, Serial no. A22341310061001, 22 kW, Exhaust/piping system, Dust collection container, Welding fume class W3 +++ Subject to prior sale! +++ Ledpfx Aksz Tn Edsqsru +++ Attention: This unit is part of an online auction! +++

Condition: excellent (used), Year of construction: 2002, edge seize 0,2 - 12 mm work piece dimension Lsdpehy Tlrefx Akqjru width min. 70 mm height min. / max. 8 / 42 mm length min 160 mm (strips) length min 60 mm from roll Durchlaufgeschwindigkeit: 12 m/ min glue coating with roller working height : 880 mm compressed air 6 bar,1/4 Zoll suction connection, DM 160 mm dimensions: L x W x H = 5600 x 950 x 1300 mm weight: ca. 2200 kg total conection: ca. 11,5 kW, 400 V, 50 Hz machine equipped with: - double top roll pressure with electric height adjustment - autom. roll magazine for rolls up to 800 mm DM, pneumatic cutting up to 3 mm - autom. infeed fence - no adjustment of edge seize premilling aggregate with 2 HF-motors 1,5 kW, 12000 n double end trim unit - 2 HF-motors 0,2 kW, 12.000 n 2 autom. positions = 0 + 3 deg. flush trimming aggregate with 2 HF-motors 0,7 kW, 12.000 n radius trimming unit - with2 HF-motors 0, 3 kW, 12.000 n, radius scraping unit, autom. set in flat scraping unit Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Year of construction: 2015, type of input current: three-phase, input voltage: 400 V, filter area: 286 m², suction capacity: 6,000 m³/h, input frequency: 50 Hz, Equipment: type plate available, Dust extraction unit, fume extraction unit for welding, self-cleaning cartridge filter, pneumatic, vacuum-based, suitable for plasma cutting, laser cutting, sandblasting, soda blasting, shot blasting, and for all types of dry dust. The filter is cleaned pneumatically with pulses of compressed air during operation, resulting in high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Brand: Donaldson Torit DCE Model: DFPRO 16-R Year of manufacture: 2015 Unit in the "R" version – reinforced construction with additional grounding. Built-in explosion relief flap. Delayed dust discharge valve, EX ATEX certified. Filtration area: 286 m2 Fan power: 7.5 kW Capacity: 6000 m3/h New filter cartridges installed in the unit. Lrsdpjz Trrhsfx Akqsu Stock number: 1029

Condition: like new (used), Year of construction: 2023, SCM Accord 40 fx CNC machining center with the following equipment: Working area X-Y = 6360 x 1905 mm, Z = 350 mm OF0158 Usable Z clearance height = 350 mm with H50 suction cups OF0165 Axis travel speed of Accord 40 fx Version PRO-SPEED OF0168 Pendulum (dual-zone) operation OF0169 Automatic axis lubrication OF0299 TELESOLVE remote maintenance via Internet 450328 eye-M PRO control console with integrated PC 450291 Additional fixed control panel 870068 TECPAD – remote control of machine functions 560058 No. 10 carrier rails MATIC – L1825 230429 MAXI working unit – Prisma KT 1 870046 Prepared for angle gearbox "Prisma KT-KS" 470014 Air nozzle for tool 870119 Device for tool length measurement 870120 Device for panel thickness measurement Lrjdpjyfgzdofx Akqsu 870009 Drilling unit F16 OF0176 Front stop row H50 for worktable with 10 carrier rails 510205 Preparation for clamps for worktable with 10 carrier rails 480178 Front stop row H110 for worktable with 10 carrier rails 480105 Rear stop row H110 for worktable with 10 carrier rails 480137 First lateral stop row H110 for worktable with 10 carrier rails 480005 Suction cups H110, 145x145 mm, 36 pcs 480006 Suction cups H110, 145x55 mm, rotatable, 10 pcs 480007 Suction cups H110, 180x65 mm, rotatable, 10 pcs 480018 Suction cups H110, 145x30 mm, rotatable, 5 pcs 480410 Lifting devices H110, 8 pcs 350016 Vacuum pump 250 (300) m³/h 560538 Additional automatically adjustable base for MATIC 10 carrier rail 190046 PRO-SPEED safety system 524800 "SAV€NERGY" 2.0 energy saving system 210837 TR12 – lateral tool magazine 210056 Rapid 24 – rear tool magazine OF0182 Air conditioning for control cabinet OF0438 Human-machine interface software (HMI) MAESTRO ACTIVE OF0543 Operating system Windows 10 embedded 64 bit OF0422 Machine operating interface software Maestro cnc OF0435 Hardware dongle for Maestro cnc 524309 Maestro 3D-Advanced module 109993 MACHINE LANGUAGE: German SPECIAL FEATURES INCLUDED IN MACHINE CONFIGURATION: - Extension of maximum panel width to 2,120 mm for full processing; traverse length remains unchanged at 1900 mm. - 10 support suction cups for remnants MACHINE ALREADY DISMANTLED AND STORED. LIST PRICE 2023 EUR 399,890.--

Condition: new, Rusticating machine for wooden artefacts such as boards, profiles, beams and strip wood for flooring, with maximum width 40 or 60 cm x 30 cm high. hight adjustment via hand wheel and numerical read out brush DM 200 mm machine in CE working width 600 mm max. working height 300 mm suction DM 2 x 140 mm motor feeder 0,37 kW feeder speed variabel 3 - 20 m/min motor brushing aggregate each 4,0 kW machine weight approx 750 kg inkl. 1 steel brush DM 200 mm Lodpodd Hi Esfx Akqoru 1 TYNEX brush DM 200 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), belt driven Flow rate 14500 m3/h Negative pressure 3091 Pa Motor power 22 kW Speed ​​2340 rpm Suction DM 500 mm Outlet DM 400 x 500 mm Dimensions L x W x H = 1800 x 1300 x 1250 mm Advise used machines: Ljdpfeh Tfqhjx Akqsru • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: good (used), Storage location: 3129 Manufacturer: Pulsnitz Year of manufacture: 1979 Machine number: 1308 Type / Model: Sto 5 / 125-1 Capacity: 400 m³/h Maximum negative pressure: 1,250 Pa Density: 1.2 kg/m³ Maximum operating temperature: 50 °C Impeller diameter: 480 mm Suction port diameter: 380 mm Connection: 0.37 kW 220/380 V Condition: good Lodszmaw Hopfx Akqsru Weight: 35 kg Dimensions: 480 x 600 x 1,100 mm

Condition: excellent (used), pressure: 3 bar, temperature: 134 °C, type of input current: three-phase, input voltage: 400 V, usable tank capacity: 2,500 l, Used Becomix production plant consisting of main mixer RW2500 and pre-mix vessel AB1200 for mixing, dispersing, homogenizing and emulsifying on an industrial scale. Originally used for sterile skin care products. Very good condition, complete factory overhaul planned (new seals, piping, pneumatics and control, homogenizer and drives overhauled), new stainless steel platform included. MAIN MIXER RW2500 • Working volume approx. 600–2,500 L, total volume approx. 3,458 L, 316L mirror polished • 0–3 bar, vacuum to -1 bar, up to 134 °C, jacket, TÜV approved Lrodpfx As Ad H Iqjkqju • Anchor agitator with PTFE scrapers approx. 30 kW, rotor-stator homogenizer approx. 45 kW (5–25 m/s) • Recirculation line DN100, hydraulic lid PRE-MIX VESSEL AB1200 • Working volume approx. 400–1,200 L, turbo agitator, two-zone heating, transfer line FURTHER EQUIPMENT • CIP for both vessels incl. CIP rack, CIP/SIP capable, aseptic valves • Water ring vacuum pump approx. 200 m³/h, powder suction and liquid dosing • New Siemens PLC with touch panel, recipe control, GMP documentation SERVICE • Turn-key installation and commissioning available • 12 months warranty (excluding wear parts) Inspection in Weyhe near Bremen, Germany, by appointment. Questions or more photos? Simply send us an inquiry. Offer subject to prior sale by an independent dealer, not affiliated with the manufacturer.

Condition: refurbished (used), power: 30 kW (40.79 HP), type of input current: three-phase, input voltage: 400 V, rotational speed (min.): 3,500 rpm, Used Vakumix inline homogenizer with 30 kW, horizontal design on castors – for retrofitting to existing vessels and mixing plants. For homogenizing, dispersing and emulsifying in recirculation or single pass for cosmetics, pharma, food and chemicals. EQUIPMENT • Drive power 30 kW, PLC controlled • Suction connection DN 100, discharge DN 80 • Front suction inlet DN 25 for liquids OVERHAULED • New control system • New frequency converter • All seals new incl. mechanical seal DELIVERY • Delivery time approx. 4 weeks, international shipping possible Lrsdpfx Aoyf N Hvokqeu Inspection in Weyhe near Bremen, Germany, by appointment. Questions or more photos? Simply send us an inquiry. Offer subject to prior sale by an independent dealer, not affiliated with the manufacturer.

Condition: reconditioned (used), pressure: 2 bar, temperature: 133 °C, power: 45 kW (61.18 HP), type of input current: three-phase, input voltage: 400 V, usable tank capacity: 125 l, rotational speed (max.): 82 rpm, rotational speed (min.): 19 rpm, Used Symex CML125 vacuum homogenizer mixer in pharma design, factory overhauled with new seals. Complete process unit for mixing, dispersing, homogenizing, emulsifying, heating, cooling and vacuum – ideal for creams, ointments, gels and pastes in pharma, cosmetics and food. EQUIPMENT Lredpfx Akoyf N H Aeqeu • Scraper agitator with PTFE scrapers and 2 baffles, for products up to approx. 100,000 mPas • Bottom homogenizer Symex HFDA 250, forward/reverse, double mechanical seal SiC/SiC • Large and small recirculation DN50, direct powder and liquid suction • CIP with rotating spray heads (Toftejorg), hydraulic lid lift • Liquid ring vacuum pump, temperature control unit (steam / cooling water) • Siemens S7-300 with touch panel, batch control, trend recording • Documentation incl. manuals, wiring diagrams, test certificates; PED / AD2000 SERVICE • Turn-key installation and commissioning available, optional IQ/OQ • 12 months warranty (excluding wear parts) Inspection in Weyhe near Bremen, Germany, by appointment. Questions or more photos? Simply send us an inquiry. Offer subject to prior sale by an independent dealer, not affiliated with the manufacturer.

Condition: like new (used), Year of construction: 2026, functionality: fully functional, working width: 460 mm, area performance: 1,840 m²/h, overall weight: 25 kg, tank capacity: 4 l, total height: 1,154 mm, total width: 551 mm, total length: 446 mm, water tank capacity: 4 l, We are selling the new Kärcher K-Mop 46 Bp Pack 36/75. This is a showroom model in new condition. The K-Mop 46 is the perfect solution for professionals who want to make no compromises on ergonomics, durability, and performance. Its extremely robust design, combined with easy handling, masters every challenge – from narrow areas to large spaces. The high maneuverability and the working width of 46 centimeters ensure maximum efficiency. Thanks to the powerful suction, floors are immediately dry and safe to walk on. Lodpfxe Ab Dwdj Akqsru The intuitive operation requires minimal training and enables direct, professional use. The ergonomics, developed in collaboration with experts, guarantee back-friendly and energy-saving work. With 4 liters each for the fresh and dirty water tanks, the K-Mop 46 impresses with its endurance and sustainability. A recycled content of 28 percent, the eco!Mode, and low consumption values help conserve valuable resources. As part of the Kärcher system, the device seamlessly integrates into the Battery Power+ platform and the Kärcher Equipment Management system. Take control – with the K-Mop 46, your reliable partner for professional cleaning. Technical data: Working width of brushes: 460 mm Theoretical area performance: max. 1840 m²/h Practical area performance: 1200 m²/h Fresh/dirty water tank: 4/4 l Permissible total weight: 24.7 kg

Condition: new, Aluminum format sliding carriage (anodized) with hardened steel guide rods. Kickback protection for thickness planer. Anodized parallel stop with micrometric fine adjustment. Slant adjustment of the saw blade up to 45° using a handwheel. Table opening ø190 mm with under-table suction. Milling stop 180 mm. Built-in milling spindle lock. Laying table with telescopic stop, eccentric clamp, degree grid 100% Made in EU (developed, built, quality tested) Technical data: Surface planing unit: Table width: 410 mm Table length: 1800 mm Planing shaft diameter: 100 mm Number of planing knives: 4 pieces Shaft speed: 5000 Motor output power: 5 kW S6 400V (4 kW S1) Thickness unit: Thickness passage, min/max: 4 - 230 mm Feed speed: 7 m/min Milling machine: Useful length of the spindle: 125 mm Height adjustment of the. Spindle: 160 mm Max. tool diameter when profiling: 180 mm when tenoning: 250 mm Spindle speed: 8000/6000/3500/1400 Table openings: 190 mm Integral stop: 500 mm Motor output power: 3.8 kW S6 400V (3kW S1) Lrsdpfx Aksvrvcajqju Circular saw: Format table: 2300 x 285 mm Saw blade diameter max/min: 315 mm/250 mm Incline position: 90° - 45° Max. cutting height: 90° 45 ° Saw blade 315: 102/72 Motor output power: 3.8 kW S6 400V (3kW S1) Weight: 900 kg Optional accessories: Reversible blade (no extra charge) Spiral planer shaft Long hole board Scoring unit

Condition: ready for operation (used), Year of construction: 2013, operating hours: 1,000 h, This REIFENHÄUSER BI Trudes 115 was manufactured in 2013. Ideal for pipe extrusion, this machine represents a robust addition to any production line. Contact us for more information. Additional equipment • 2x electrical melt pressure transducer 1/2 “UNF diaphragm pressure transducer • 2x ground temperature sensor with sword probe Machine Benefits Qualitative Machine Benefits • 13x anchoring for one fixing point installation tool • Pair of worms, compact version, made of highly tempered steel and bimetal design • Counter-rotating twin-screw extruder, gearbox with integrated back pressure bearing for 350 bar • Recirculating oil lubrication with oil pressure and oil temperature monitoring • Barrel Ø 115-30 d with atmospheric and vacuum degassing openings • Heating and air cooling divided into 5 zones, total output of 56400 w • Vacuum unit for bt 115 including 2x vacuum unit and vacuum suction unit Ledpfxjx D Ewms Akqoru • Complete screw temperature control including cassette installation • Mains supply with main switch and load disconnector for heating, drives, and auxiliary voltages Technical Machine Benefits • Stationary for an extrusion height of 1000 mm • Complete control cabinet with all necessary control and regulation equipment attached • Microprocessor-controlled multi-channel controller for two and three-point zones • Adaptive and self-optimizing control behavior • Fault messages with collective alarm and storage • Siemens mp377 touch panel for setpoint specification and actual value display • Recipe management of up to 20 recipes • Drive with one ac motor, vector-controlled • Digital drive controller for ac motors, with full digital technology • Motor temperature monitoring with pre-warning and shutdown Extra Information Machine still under power

Condition: good (used), Code: 0500 Brand: PEGIC - ITALY Model: GP 350 RT - CE Standard Crosscutting machine with suction base for cutting frames, wooden profiles, joinery, furniture, window frames, aluminium, pvc, plastics and various materials - CE Standard Technical data: Blade diameter mm 350 F 30 Revolutions per minute rpm 3000 Three-phase motor power Kw 2,2 Cutting capacity mm 120 x 160 Suction base GPS Lodpfx Ake Aawqzoqsru Motor Kw 1,3 Capacity 1200 m3/h Overall dimensions mm 850 x 650 x 1300 h Weight kg 100

Condition: good (used), Code: 0503 Brand: SAC - ITALY Model: RS 53 - CE Standard Automatic thickness planer for joinery workshops, furniture factories, custom furniture, sawmills, wood, composite materials, plastics - CE Standard Technical data Working width mm 530 Max working height mm 240 Min working height mm 3 Lodpfxj Aa Ayzj Akqoru Max depth of cut mm 8 N° 4 knives Feed speed mt/min 5 - 7,5 - 10 - 15 Motor Hp 5,5 Diameter of suction connection mm 140 Overall dimensions mm 930 x 1050 x 1100 h Weight kg 970

Condition: refurbished (used), Year of construction: 2024, operating hours: 260 h, functionality: fully functional, fuel type: electric, color: red, area performance: 6,000 m²/h, sweeping width: 1,000 mm, tank capacity: 70 l, Stolzenberg Twin Top TT 1000 E Ride-on Sweeper-Vacuum Stolzenberg Twin Top TT 1000 E – Year of manufacture 2024 | approx. 260 operating hours | new batteries | new side and main sweeping rollers | new drive chains | new solid rubber tires | incl. charger | Sweeping width 1000 mm | Tandem roller system TRS | 2.5 hours runtime | 900 W drive Technical data: Manufacturer: Stolzenberg Model: Twin Top TT 1000 E Condition: fully overhauled Year of manufacture: 2024 Operating hours: approx. 260 h Sweeping roller width: 600 mm Total sweeping width: 1000 mm Tandem roller system: TRS Turning radius: 1.0 m Drive: forward & reverse / differential rear-wheel drive Dirt container: 70 L Filter cleaning: electric Cleaning area: up to 8,000 m² Sweeping performance: 6,000 m²/h Climbing ability: 20 % Runtime: 2.5 h Drive: 900 W / 2 x 12 V 105 Ah battery Charger: included Dust extraction: Yes Material: impact-resistant PE plastic Equipment: new batteries, new side and main sweeping rollers, new drive chains | new solid rubber tires | incl. charger Highlights & Features: - Professional sweeper-vacuum – ready for immediate use - new batteries, new side and main sweeping rollers, new drive chains, new solid rubber tires - Tandem roller system (TRS) – excellent cleaning performance, even with fine dust and sand - Working width 1000 mm – high area performance up to 6,000 m²/h - Electric filter cleaning – consistently high suction power - Robust PE housing – impact-resistant and durable - Ideal for indoor and outdoor use – versatile - Fully overhauled condition – immediately available Application areas: ✓ Industrial halls & storage areas ✓ Car parks & underground garages ✓ Workshops & manufacturing ✓ Outdoor cleaning of squares & paths ✓ Agriculture & municipal operations Location: Warehouse D-46514 Schermbeck (North Rhine-Westphalia) – Inspection and collection possible Delivery: nationwide and internationally on request Pricing: ex warehouse Maassenstraße 91, D-46514 Schermbeck (Wesel district) All information without guarantee. Errors and prior sale excepted. Prices plus VAT / VAT excluded Other models available! ➡️ New & used machines, accessories & spare parts Buy Stolzenberg Twin Top TT 1000 E | Electric ride-on sweeper | Used sweeper-vacuum | Industrial sweeper | Ride-on sweeper for indoor & outdoor use | Battery-powered sweeper | Stolzenberg Twin Top | Sweeper-vacuum for warehouses | Cleaning machine 1000 mm | Electric industrial sweeper Ljdpfxs Aa Dp De Akqsru Your reliable partner for cleaning technology & construction machines: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Request now & secure immediately available machines! If required, we will gladly arrange a virtual inspection of the machine via video call.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, overall weight: 30 kg, Factory liquidation for mask production. Installed in 2021, out of operation since March 2022. The equipment has already been dismantled and is ready for delivery. Stationary industrial vacuum cleaner Power: 2.2 kW Airflow: 300 m³/min Lrodpfxjxqghtj Akqeu Suction connection: 40/50 mm Weight: 30 kg

Condition: new, Year of construction: 2026, Weima Hacker / Shredder WL 8 with Top Features Lsdpfx Aspdqzxekqeru - 2nd knife row, log spacer, 4-sided segment base, discharge auger with gear motor, Fast reverse hydraulics with shock valve The single-shaft shredder WL 8 is a proven classic for shredding wood waste of all kinds. It is used, for example, thousands of times in woodworking companies worldwide. The high number of these highly sought-after shredders guarantees proven and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures extremely high durability (even outdoors). Intuitive operation thanks to Siemens PLC control with touch display To ensure that the electronics are optimally adapted to the machine, we design, build and wire our control cabinets ourselves. We use only high-quality components – for example, from Siemens or Rittal. Intuitively operated touch surfaces guarantee quick adjustments. Functions such as adjusting the slide timing or stop ensure a high throughput. The built-in overload protection also prevents damage to the machine. No material bridging due to self-cutting hopper design The hopper performs several tasks at once. First, the material to be shredded is fed into it – manually, mechanically or via a conveyor belt. The generous opening also makes it easy to fill very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridging, is crucial for the shredding process. Even with bulky parts, the shredder cuts itself free. If required, both hopper extensions and lids with gas spring are available. Durable rotor bearings thanks to offset design A rotor bearing must be particularly robust due to its extreme stress during the shredding process. To prevent dust or foreign objects from entering it, we have separated it from the machine frame. This also makes it very easy to maintain and access. Rotor diameter (mm): 260 Rotor length (mm): 1000 Rotor speed (RPM): 80 - 125 Power (kW): 22 Number of knives: 54 Available knife sizes (mm): 40 x 40 Grain size (mm): 15/20 mm or according to customer requirements Suction nozzle (mm): 200 Feed opening (mm): 1000 x 1250 Length (mm): 2045 Width (mm): 1740 Height (mm): 1840 Weight (approx. kg): 2200 Accessories: - 2nd knife row - Log spacer - 4-sided segment base - Discharge auger with gear motor - Fast reverse hydraulics with shock valve - Screen size 15/20 mm List price: €52,320, sold at a special price Location: In stock at 54634 Bitburg - available immediately - The pictures show a machine without a discharge auger; one will be available in stock.

Condition: used, Thermo Fisher ARCTIC A25 Lodpfx Akjzgcgdjqeru Technical data: Controller type: SC150 Capacity: 12 l Communication: RS232, RS485, Ethernet/LAN, analog I/O Cooling capacity: 500 W Flow rate: 17 l/min Pump type: Pressure pump, suction pump Temperature range: -25°C to +100°C Max. pressure: 300 mbar Temperature stability: 0.02°C Dimensions (L x W x H): 48.3 x 27.3 x 71.1 cm Length: 48.3 cm Internal length: 18.4 cm Width: 27.3 cm Internal width: 17.3 cm Height: 71.1 cm Internal depth: 20.4 cm Weight: 36.1 kg Electrical requirements: 230 V 50 Hz Voltage: 230 V Frequency: 50 Hz Condition: used Scope of delivery: (See images as shown) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Leybold Type: Trivac D 40 B The TRIVAC B series are oil-sealed rotary vane vacuum pumps. The oil injected into the pumping chamber serves as a sealant, lubricant, and coolant. The pump housing is made up of individual parts without sealing elements. These parts are pinned together to ensure easy disassembly and assembly. Ultimate pressure: 2 x 10⁻³ mbar Motor: 3-phase, 230/400 V, 50/60 Hz Pumping speed (50 Hz): 40 m³/h Pumping speed (60 Hz): 48 m³/h Environmentally friendly: Quiet Vibration-free operation, energy-saving Energy-saving: Low power consumption Low heat dissipation Modern vacuum technology: High pumping speed up to the ultimate pressure Low ultimate pressure, even with gas ballast High water vapor tolerance Continuous operation even at 1000 mbar Built-in oil pump, force-lubricated plain bearings Minimal air swallowing High leak tightness (4He-compatible) Technical data: Product: TRIVAC D 40 B Suction flange: DN 40 ISO-KF Discharge flange: DN 40 ISO-KF Nominal pumping speed at 50 Hz: 46.0 m³/h Nominal pumping speed at 60 Hz: 55.0 m³/h Pumping speed at 50 Hz: 40.0 m³/h Pumping speed at 60 Hz: 48.0 m³/h Ultimate partial pressure without gas ballast: 1.0 x 10-4 mbar Ultimate total pressure without gas ballast: < 2.0 x 10-3 mbar Ultimate total pressure with gas ballast: < 5.0 x 10-3 mbar Water vapor tolerance at 50 Hz: 40.0 mbar Water vapor tolerance at 60 Hz: 40.0 mbar Water vapor capacity at 50 Hz: 1,184 g/h Water vapor capacity at 60 Hz: 1,184 g/h Ljdpjzianwefx Akqeru Operating fluid volume: min.: 1.7 l max.: 2.6 l Sound level according to DIN 45 635 without gas ballast: 57 dB(A) with gas ballast: 59 dB(A) Mains connection: 3-phase, 200 / 200-240 / 380-400 V ±10%, 50 Hz 3-phase, 200-240 / 380-480 V ±10%, 60 Hz Motor power: 2.2 kW Motor speed at 50 Hz: 1,430 min⁻¹ Motor speed at 60 Hz: 1,735 min⁻¹ Motor protection: IP 55 Permissible ambient temperature: +12 to +40°C Weight: 73.0 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.