Used Swing Beam Shear for sale (8,127)

Condition: excellent (used), Year of construction: 1994, Josting Veneer Pack Cutting Machine Type: EFS 2300 L - Year 1994 Cutting length: 2,300 mm Maximum insertion height: 80 mm FIESSLER safety light curtain Alignment light for cutting position display Dkodpfxsxgbwzj Apwsr Parallel fence motorized adjustment, fine adjustment via handwheel Connected load: 7.7 kW Weight: 2,700 kg Dimensions: 3,610 x 1,700 x 1,680 mm Ex-works: - available immediately -

Condition: new, Year of construction: 2026, TBS – Manual Sheet Metal Shears Manual sheet metal shear Suitable for cutting construction steel, aluminum, copper, zinc, and plastic High-quality steel cutting blades with a hardness of HRC55-60 Equipped with two operating handles Features a front support surface with a scale and an adjustable rear stop 800 mm table height Scope of delivery: 2 operating handles Model TBS 2000-12 Item No. 3746020 Technical data Working width max. 2000 mm Djdpecnxc Rjfx Apwskr Sheet metal thickness max. - material tensile strength 400N/mm² 1.25 mm Rear stop range 0-300 mm Weight 511 kg Dimensions in mm 2450 x 1100 x 1050 mm

Condition: new, Year of construction: 2026, For sawing, e.g., stainless steel, tool steel, hollow profiles, and solid materials. Two-pole drive motor enables saw blade speeds of 30 and 65 m/min. Monitoring of the saw blade tension electromechanically via microswitches. When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve – additional locking on the cylinder is therefore not required. Saw arm inclined by 25°, resulting in a longer service life of the saw blade. Precise and robust blade guides with adjustable carbide plates. After the cutting process is completed, the saw blade stops automatically in the lower end position. Lowering of the saw arm by gravity or manually. With continuously adjustable, constant saw arm lowering speed via hydraulic cylinder. Dimensions and weights Length approx. 1200 mm Width/Depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage 400 V Mains frequency 50 Hz Machine data Saw blade speed(s) 30 / 65 m/min Speed stages 2 Saw blade length 2450 mm Djdpfx Apsg U Uv Rewokr Saw blade width 27 mm Saw blade thickness 0.9 mm Material feed Table height, material feed 925 mm Cutting ranges 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular (lying, hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular (lying, hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular (lying, hollow profile) 90 x 90 mm Art. No.: 3680001 Location: In stock, 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2008, sheet width 3050 mm Djdpfx Aezkvx Iopwokr plate thickness 30.0 mm column arm 100 mm cutting angle 1,5° - 3,5° adjustment speed max. 200 mm/s weight 36.000 kg dimensions 4700 x 3535 x 2980 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, Capacity: 1040 x 3.5 mm - Light gauge sheet metal protection at the rear Dedpfszq Uvxex Apwskr - Ortlinghaus brake and clutch combination - Tilting roller table or sheet metal lifting system with plastic rollers - Central lubrication system

Condition: ready for operation (used), Year of construction: 2004, sheet width 3050 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm cutting angle 0.5 - 2.5 ° no. of strokes 8 - 25 Hub/min back stop - adjustable max. 1.000 mm Control SIEMENS Number of downholders 13 Stk. Dedjzkvx Ujpfx Apwekr oil volume 300 ltr. engine output 21.0 kW weight 8700 kg. range L-W-H 3950 x 2200 x 1900 mm Features: - Robust electro-hydraulic sheet metal shear * Design: "Circuit-guided" - NC electro-motorized backgauge * with SIEMENS NC control unit "OP 7" * Input of target and actual position values - NC electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the front via handwheel - Recessed grips in the front support table - Front finger guard - 1x long side fence - 1x long support arm - 1x freely movable foot switch - Original operating instructions (NL)

Condition: used, LVD Shear Dkjdpfx Aox Tqtbjpwjr Type HST C-10/31 Capacity 3000 x 10

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 10 h, machine/vehicle number: ShearOne H3000-6_14, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, back gauge: 1,000 mm, overall weight: 7,000 kg, total length: 2,700 mm, total width: 4,500 mm, total height: 2,100 mm, warranty duration: 36 months, travel distance X-axis: 1,000 mm, cutting length (max.): 31,000 mm, cutting width (max.): 3,100 mm, Equipment: safety light barrier, Hydraulic guillotine shear ShearOne H3000-6 from CoastOne in Finland Cutting length - 3,100.0 mm Sheet thickness 400 N/mm² - 6.0 mm Dodpjzlhhkefx Apwjkr Sheet thickness 700 N/mm² - 4.0 mm Cutting angle ° - 0.5 - 2.0 Back stop - 1000 mm

Condition: good (used), functionality: fully functional, Year of construction: 1987, Used 3-meter plate shear from Haco Atlantic Dksdpfxezi Rl Ts Apwor Type: ATS 3006 Capacity: 3100 x 6 mm Electric back gauge Electric cutting angle adjustment Year of manufacture: 1987

Condition: excellent (used), Panel Beam Saw - With rear lifting table Numerical Control POWER CONTROL Software CADmatic 4 Professional Outside Rollers table for pre-loading (mm 5600 x 2200) Lifting scissor table (mm) 5600 x 2200 Rear pusher with 13 clamps / grippers (1 x Power Concept / Twin Pusher) With clamps / grippers - RETENTION DEVICE FOR THIN PANELS (Minimum thickness 3 mm) Turning device (rotating unit) at 90° Max. cutting width (mm) 5600 - Useful stroke of the pushing system (mm) 5600 Max blade projection (mm) 130 Scoring Unit (max saw diameter / power) mm 200 / Kw 2,2 Main Sawing Unit (max saw diameter / power) mm 480 / Kw 30 Adjustable speed of the saw carriage (m/min) 1 - 150 Dkjdpfxezl S Nfs Apwor N° 5 Front supporting tables with Air blowing system OPTION: Printer for labels - PICA

Condition: repair required (used), functionality: not functional, Circular shear, capacity 1500 x 6 mm, pneumatic system needs to be completely or partially renewed. Dkodpfxozq Sqaj Apwer

Condition: good (used), Demolition shears, demolition pliers, hydraulic demolition shears -Demolition shears: Hydraulic demolition shears, without hydraulic power unit Dkedpfx Aezkkc Iopwer -Opening width: 290 mm -Transport dimensions: 950/800 (H140 mm -Weight: 94 kg

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: ESTUN Automation, controller model: E21S, working width: 3,200 mm, cutting angle (min.): 1.5 °, cutting angle (max.): 1.5 °, stroke rate (min.): 10 1/min, stroke rate (max.): 10 1/min, sheet thickness (max.): 10 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 6 mm, table height: 800 mm, back gauge adjustment: motor-driven, back gauge: 600 mm, back gauge travel distance R-axis: 600 mm, input voltage: 400 V, type of input current: three-phase, oil tank capacity: 200 l, overall weight: 10,000 kg, total length: 4,050 mm, total width: 2,050 mm, total height: 1,950 mm, warranty duration: 12 months, Equipment: CE marking, angle stop, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, HYDRAULIC GUILLOTINE SHEAR 10 × 3200 ESTUN E21S Controller and Illuminated Cutting Line This hydraulic guillotine shear is designed for accurate straight-line cutting of sheet metal and strips made from steel, non-ferrous metals and other compatible materials. With a maximum cutting capacity of 10 mm and a working length of 3200 mm, it is a powerful solution for fabrication workshops and industrial production facilities. The machine combines a robust hydraulic system with a motorized back gauge and ESTUN E21S controller, providing quick and repeatable positioning. The illuminated cutting line helps the operator align each workpiece accurately before cutting. Hydraulic hold-downs secure the sheet along the entire cutting length. Ball transfer units integrated into the table simplify the positioning of large and heavy sheets while helping protect their surfaces. Front support arms and a front gauge with measuring scale provide additional support and improve accuracy during repeat work. The segmented blade design allows an individual damaged section to be replaced instead of the complete blade, helping reduce maintenance costs. Adjustable blade clearance enables the machine to be configured for different sheet thicknesses and materials. TECHNICAL DATA - Maximum sheet thickness: 10 mm - Maximum cutting length: 3200 mm - Blade rake angle: 1°30′ - Cutting frequency: 10 strokes/min - Back-gauge travel: 600 mm - Distance between side frames: 3450 mm - Blade length: 3300 mm - Table height: 800 mm - Motor power: 15 kW - Weight: 10,000 kg - Dimensions (L × W × H): 4050 × 2050 × 1950 mm - Controller: ESTUN E21S - Cutting-line indicator: Illuminated STANDARD EQUIPMENT - Motorized back gauge - Ball-guided back-gauge system - Hydraulic sheet hold-downs along the full cutting length - Segmented, individually replaceable blades - Blade-gap adjustment - Ball transfer units on the worktable - Front material-support arms - Front gauge with measuring scale - Front and rear safety guards - Foot-control pedal - ESTUN E21S controller - Illuminated cutting line CONDITION, WARRANTY AND DOCUMENTATION - Brand-new machine - 12-month warranty - Warranty and post-warranty service - CE Declaration of Conformity - Operating and maintenance manual in English Dodpfx Apoyt Itqewekr This guillotine shear combines high cutting capacity, straightforward control, accurate sheet positioning and practical safety equipment. It is suitable for general fabrication work and repeat industrial production. Delivery can be arranged throughout Europe and beyond. Transport costs are calculated individually according to the destination. Please provide the delivery address or postal code to receive a quotation. Please visit our website to view our other available metalworking machines.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: ESTUN Automation, controller model: E21S, working width: 3,200 mm, cutting angle (min.): 1.5 °, cutting angle (max.): 1.5 °, stroke rate (min.): 14 1/min, stroke rate (max.): 14 1/min, sheet thickness (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, table height: 800 mm, back gauge adjustment: motor-driven, back gauge: 600 mm, back gauge travel distance R-axis: 600 mm, input voltage: 400 V, type of input current: three-phase, oil tank capacity: 200 l, overall weight: 7,380 kg, total length: 3,840 mm, total width: 1,675 mm, total height: 1,620 mm, warranty duration: 12 months, Equipment: CE marking, angle stop, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, OFFER OF THE WEEK – 5% DISCOUNT! HYDRAULIC GUILLOTINE SHEAR 6 × 3200 mm Hydraulic guillotine shears are used for straight-line cutting of sheets and strips made of steel, non-ferrous metals, and other materials. Technical data: Maximum sheet thickness: 6 mm Maximum cutting length: 3200 mm Blade rake angle: fixed −2° Number of strokes per minute: 14 Back gauge travel: 20–600 mm (standard) Distance between side frames: 3450 mm Table height: 800 mm Motor power: 7.5 kW Weight: 7380 kg Machine dimensions (L × W × H): 3840 × 1675 × 1620 mm Equipment: Controller E21 Motorized back gauge Back gauge with ball screws Hydraulic sheet hold-downs along the entire cutting length Segmented blades with the possibility to replace only the damaged segment Digital readout of the back gauge position Blade gap adjustment Set of blades Djdsyt E Ekepfx Apwokr Ball transfer units on the table 3 front support arms Front gauge with measuring scale Rear safety guard Front safety guard Illuminated cutting line Foot pedal CE declaration of conformity Manual in Polish Delivery conditions: The machine is brand new 12-month warranty Warranty service Post-warranty service CE declaration of conformity Operation and maintenance manual (English) Delivery to the customer is possible. Transport cost is calculated individually by the transport company. If you are interested in other machines, we encourage you to visit our website.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: ESTUN Automation, controller model: E21S, working width: 3,200 mm, cutting angle (min.): 1.5 °, cutting angle (max.): 1.5 °, stroke rate (min.): 12 1/min, stroke rate (max.): 12 1/min, sheet thickness (max.): 8 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 5 mm, table height: 800 mm, back gauge adjustment: motor-driven, back gauge: 600 mm, back gauge travel distance R-axis: 600 mm, input voltage: 400 V, type of input current: three-phase, oil tank capacity: 200 l, overall weight: 7,300 kg, total length: 3,850 mm, total width: 2,345 mm, total height: 1,620 mm, warranty duration: 12 months, Equipment: CE marking, angle stop, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, OFFER OF THE WEEK – 5% DISCOUNT! HYDRAULIC GUILLOTINE SHEAR 8 × 3200 E21S Controller and Illuminated Cutting Line This hydraulic guillotine shear is designed for accurate straight-line cutting of sheet metal and strips made from steel, non-ferrous metals and other compatible materials. With a maximum cutting capacity of 8 mm and a working length of 3200 mm, it is a powerful solution for fabrication workshops and industrial production facilities. The machine combines a robust hydraulic system with a motorized back gauge and E21S controller, providing quick and repeatable positioning. The illuminated cutting line helps the operator align each workpiece accurately before cutting. Hydraulic hold-downs secure the sheet along the entire cutting length. Ball transfer units integrated into the table make large sheets easier to position and help protect their surfaces. Front support arms and a front gauge with measuring scale provide additional support and simplify repeat work. The segmented blade design allows an individual damaged section to be replaced instead of the complete blade, helping reduce maintenance costs. Adjustable blade clearance enables the machine to be set for different sheet thicknesses and materials. TECHNICAL DATA - Maximum sheet thickness: 8 mm - Maximum cutting length: 3200 mm - Blade rake angle: 1°30′ - Cutting frequency: 12 strokes/min - Back-gauge travel: 600 mm - Distance between side frames: 3450 mm - Blade length: 3300 mm - Table height: 800 mm - Motor power: 11 kW - Weight: 7300 kg - Dimensions (L × W × H): 3850 × 2345 × 1620 mm - Controller: E21S - Cutting-line indicator: Illuminated STANDARD EQUIPMENT - Motorized back gauge - Ball-guided back-gauge system - Hydraulic sheet hold-downs along the full cutting length - Segmented, individually replaceable blades - Blade-gap adjustment - Ball transfer units on the worktable - Front material-support arms - Front gauge with measuring scale - Rear safety guard - Front safety guard - Foot-control pedal - E21S controller - Illuminated cutting line Dkodeyt E U Ejpfx Apwer CONDITION, WARRANTY AND DOCUMENTATION - Brand-new machine - 12-month warranty - Warranty and post-warranty service - CE Declaration of Conformity - Operating and maintenance manual in English The machine offers a strong combination of cutting capacity, accurate sheet positioning, straightforward operation and comprehensive safety equipment. It is suitable for general fabrication work and repeat production. Delivery can be arranged throughout Europe and beyond. Transport costs are calculated individually according to the destination. Please provide the delivery address or postal code to receive a quotation. Please visit our website to view our other available metalworking machines.

Condition: used, functionality: fully functional, On offer: ITALPRESSE Nuovo Program edge press – 3000 × 2000 mm, 9.5 t pressure The machine is used, has undergone a technical inspection, is fully functional, and ready for operation. Before purchase, it can be started and thoroughly inspected at our company's premises. The machine's greatest advantage is the ability to apply pressure to components simultaneously in two planes, thanks to independently controlled vertical and horizontal cylinders. Its large working range and even pressure distribution enable precise gluing of frames, furniture carcasses, boxes, fronts, and other structural elements. Specifications: • Manufacturer: ITALPRESSE • Model: Nuovo Program • Year of manufacture: 2004 • Maximum working dimensions: 3000 × 2000 mm • Minimum working dimensions: 250 × 340 mm • Number of vertical cylinders: 2 • Number of horizontal cylinders: 2 • Type of cylinders: hydraulic • Total clamping force: 9.5 t • Cylinder control: independent for vertical and horizontal cylinders Dodezivvwopfx Apwjkr • Control panel: suspended, mounted on an arm • Hydraulic unit power: 1.5 kW • Maximum working pressure: 150 bar • Width of clamping beams: 100 mm • Power supply: 400 V / 50 Hz • Weight: approximately 1200 kg • Overall dimensions: 340 × 95 × 260 cm (L × W × H, without the control panel arm) • Complies with CE requirements Applications: • Gluing of frames and frame structures • Assembly and gluing of furniture carcasses • Gluing of boxes, fronts, and other structural elements • Precise positioning of components before gluing • Simultaneous pressing of components in the vertical and horizontal planes Additional information: • The photos show the actual condition of the machine on offer • Free machine operation training at our company's premises • The price stated in the auction applies to export sales/intra-community supply with a VAT rate of 0%; in the case of domestic sales, 23% VAT will be added Financing and transport: • We arrange transport with our MDD fleet or through external carriers • We assist in obtaining a lease or leasing loan • The cost of delivery depends on the destination and the method of machine transport

Condition: used, functionality: fully functional, Year of construction: 1985, operating hours: 27,150 h, machine/vehicle number: 2723007, control type: NC control, actuation type: hydraulic, working width: 3,000 mm, sheet thickness (max.): 4 mm, overall weight: 5,500 kg, total length: 4,000 mm, total width: 2,500 mm, total height: 1,700 mm, number of support arms: 3, Equipment: angle stop, documentation/manual, type plate available, This machine is still in use in the factory during the manufacturing process and is ready for demonstration immediately. Dkjdpszpzq Tofx Apwer

Condition: used, Year of construction: 2019, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: 1904150116, year of last overhaul: 2025, overall weight: 6,800 kg, We offer this used Forrec Granulator - 1000 R.A. rotary shear, year of construction 2019. Manufacturer: Forrec Dsdjzmyufepfx Apwskr Model: Granulator - 1000 R.A. Year of construction: 2019 Condition: used Category ID: 552 Type ID: 2731 Machine type: rotary shear If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Manufacturer: DIGÉP Djdpfx Aex H Rzrepwokr Model: DLB 7/2550

Condition: used, Max height: 2000mm Max diameter: 6mm Dkodpfjvpfp Dox Apwsr

Condition: used, Year of construction: 2006, sheet thickness (max.): 6 mm, Brand: DURMA Djdpfx Aewrx Taspwekr Type: VS 3006 Year of manufacture: 2006 Maximum sheet width: 3080 mm Maximum sheet thickness: 6 mm

Condition: good (used), Year of construction: 1997, machine/vehicle number: 607697782, Offer 23220 Technical Data: - max. working width 3050 mm - max. cutting capacity St 40 6 mm - Cutting angle, hydraulically adjustable 0.3 - 3° - Manual adjustment of the cutting gap - Number of hydraulic clamping cylinders 17 pcs - Motor-controlled rear stop 20 - 700 mm - Front angle stop + support arms - Stroke rate depending on the cutting angle and cutting length 7 - 17 strokes/min - Hydraulic drive 400 V / 15 kW Dsdpfx Apozqdcbewekr - Table height approx. 900 mm - Space requirement including rear stop, without front support arms - approx. W 3700 x H 1850 x D 2250 mm - Weight approx. 5800 kg - Including: - E-foot switch - Cutting line illumination - Cutting length preselection via potentiometer - Machine rear with light curtain safety

Condition: excellent (used), Electric Schröder plate shear – in top condition – ready for immediate use – retains its value. For sale is a Schröder plate shear with a hand-operated depth stop, in good technical and optical condition. 2x4mm. Includes loading. Sale: • Machine price (net) • You will receive a proper invoice with VAT shown. • Shipping or freight forwarding possible (upon request) • Inspection possible by appointment Please note: If interested, please contact us by phone. Phone: Djdpozq Rwlsfx Apwekr

Condition: excellent (used), Year of construction: 2016, Cidan CNC plate shear in top condition (please note that the matching shear is also available) with a rotatable upper beam, 3m x 2.5mm – with CNC control and back gauge. The shear is in very good technical and optical condition; all bearings are in perfect order. The machine comes from a small business/was originally owned by them and has therefore been well maintained. Dodpszq Ruwsfx Apwskr Ideal for sheet metal workers, roofers, carpenters, metalworkers, or workshops looking for a precise and reliable bending machine. Advantages of the machine: • High-quality brand from Cidan • Very good condition • Precise operation • Ready for immediate use • Robust, professional-grade machine

Condition: used, Machinetype: Shear / Bar shear Manufacturer: Peddinghaus YOM: 2001 - Rebuild 2011 by Schubert Controls: Siemens S7-300 PLC with 8" MP277 touch panel Shearing force: 2000kN Strokes per minute: 48 Max. Diameter: 63mm Automatic length adjustment Driven material feed table - 7m long Main drive: 30kW Dkodpfx Ajzp Nuyjpwsr Total weight: aprox. 9tons Includes large collection of knives