Used Table Border for sale (16,648)

Condition: new, table diameter 340 mm table load 160 horizontal kg. table load 100 vertikal kg. swivelling range 0 - 90.0 Grad turning speeds 0.6 - 6.0 U/min bore 60.0 mm motor 230 Volt weight of the machine ca. 56.0 kg range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time Lhedpfjxabm Nex Ab Tjc - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating instructions in German Functions COM 1800 control: - Right/left rotation - Infinitely variable speed control - Welding torch on/off - Overlap welding adjustable - Controller for rotation time (2-stroke / 4-stroke) - Speed display

Condition: new, table diameter 500 mm table load 300 horizontal kg. table load 150 vertikal kg. swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.5 U/min bore 90.0 mm table height ~ 650 mm mm motor 230 Volt weight of the machine ca. 90.0 kg. range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be tilted and clamped at an angle of 0 ° to 90 ° - manual tilting - Start / stop via location-independent foot switch - Direction of rotation can be selected right / left - Adjustable rotation time Lodoxabl Sopfx Ab Tohc - The control of the welding machine via control - 350 amp ground connection Scope of delivery: - control (integrated) - foot switch

Condition: new, total power requirement 230 Volt table diameter 300 mm table load 100 Horizontal kg swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.0 U/min turning speeds 1.2 - 12.0 U/min bore 20.0 mm weight of the machine ca. 50.0 kg dimensions of the machine ca. 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The device's control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Lhsdpfexaatnsx Ab Tsc Scope of delivery: - control (integrated) - foot switch

Condition: new, table diameter 340 mm table load 290 horizontal kg table load capacity 190 vertikal kg turning speeds 0.6 - 6.0 U/min spindle bore 60.0 mm swivelling range 0 - 90.0 Grad weight of the machine ca. 62.0 kg dimensions of the machine ca. 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - Operating instructions in German Ljdpsxaafqjfx Ab Tohc Functions of the COM 1000 control: - Right / left rotation - stepless speed control - welding torch on / off - Control for turning time

Condition: good (used), Year of construction: 1986, CNC Table-type Boring Mill Manufacturer: TOS VARNSDORF Model: WH 10 NC Year: 1986 with Heidenhain TNC 135 control. Spindle diameter: 100 mm Spindle taper: SK50 Spindle speeds: Motor 20 kW Spindle travel: 630 mm Travel paths: X 1250 mm, Y 1100 mm, Z 950 mm Table size: 1000 x 1120 mm, load capacity 3000 kg Ljdoyk Tltopfx Ab Tehc Weight: 12,800 kg Equipped with coolant system, machine documentation available. Machine not under power.

Condition: as good as new (ex-display), Year of construction: 2026, sliding table length: 3200 mm cutting width at the fence: 1350 mm cutting width at the cross cut: 3200 mm cutting depth: 125 mm scoring unit: ja sawblade diameter: electric tilting adjustment sawblade: electric adjustment fence: manuell readout sawblade tilting: Scala Lhjdpfx Aegfm Efsb Toc read out sawblade height: - read out fence: Scala read out crosscut stop: Scala sawblade diameter: 400mm number of speeds: 3000 / 4000 / 5000 U/min motor power: 7 kW motor brake: yes, automatic suction connection: 80mm und 120mm machine length: 3400mm machine width: 2000mm weight: 900kg

Condition: used, Year of construction: 2004, Sliding carriage length: 3000 mm Lhjdpfoyl Tihex Ab Tsc Cutting width at rip fence: 1350 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 170 mm Scoring unit: no Saw blade height adjustment: electric Saw blade tilting adjustment: electric Rip fence adjustment: manual Crosscut fence adjustment: manual Saw blade angle display: digital readout Cutting height display: digital readout Rip fence display: digital readout Crosscut ruler display: scale Saw blade diameter: 500 mm Spindle speeds: 4 Motor power: 7.5 kW Extraction port: 80 and 120 mm Machine length: 3600 mm Machine width: 2200 mm Weight: 1200 kg

Condition: used, Year of construction: 2013, machine/vehicle number: 13051888-1/012 Art.-Nr. 6153100, Technical data: Lhjdpfx Aowxtwyob Toc - Manufacturer: Unikraft - Type: SHT 1001 G - Year of manufacture: 2013 - Platform dimensions: 1450x1130mm - Lifting capacity: 1,000kg - Hydraulic lifting device - Net weight: 250kg - Min. height: 82 mm - Max. lifting height: 760 mm - Duration from 82 to 760 mm Lifting height: 18 s - Motor power: 0.75 kW - Anti-pinch strips - Voltage/Hz: 400/50 - Location: Blomberg warehouse

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, total length: 2,000 mm, total height: 890 mm, total width: 800 mm, Work table baker's table with beech wood worktop with lower storage shelf stainless steel construction Approx. dimensions: 2000 x 800 x 890 mm, W x D x H Ljdpjwv E N Ajfx Ab Tehc Used device, cleaned Top sanded & re-oiled We have many more tables in stock!

Condition: ready for operation (used), controller manufacturer: Heidenhain TNC 530, empty load weight: 45,000 kg, total length: 11,055 mm, total width: 6,320 mm, total height: 4,140 mm, Type: DMC-4100LH 2800 mm tussen de kolommen!! Zonder freeskop kunt u klassieke verticale bewerkingen uitvoeren. Met de multihoekfrees (MA-25) kunt u veel verschillende vlakken bewerken. MA-25 2-assige freeskop - 30 kW - 2000 tpm - 1500 Nm koppel C-as bereik: 0-360° - 2,5° Bereik van de A-as: +/- 110° - 2,5° Koeling via spindel: 40 bar Totaal vermogen: 67 kW Geen foundation nodig! De Johnford DMC-serie brugfreesmachine met dubbele kolom en beweegbare tafel is vervaardigd uit een brug/kolomconstructie van gegoten Meehanite-ijzer, die naar verluidt 30 procent minder vloeroppervlak in beslag neemt dan vergelijkbare verticale bewerkingscentra met C-frame. De brugfreesmachines zijn verkrijgbaar in uitvoeringen met beweegbare tafel en met schuifkolom (vaste tafel), met afmetingen variërend van 91 x 91 x 76 cm tot 18 x 6 meter. De lange basisconstructie biedt volledige ondersteuning aan de tafel over de gehele Y-asbeweging van 130 cm, waardoor zeer zware werkstukken bewerkt kunnen worden. De Y- en Z-assen dragen te allen tijde een vaste belasting, terwijl de X-as de enige dynamische belasting draagt. Dit maakt nauwkeurige bewerkingen en strakke toleranties mogelijk tijdens bewerkingen met hoge snelheid. Doordat er geen tafeloverhang is, worden de helling en de draaiing van de X-as geëlimineerd. De afstand tussen de hartlijn van de spindel en de kolom is geminimaliseerd, wat de stijfheid verder verhoogt. De zwaar geribbelde gietijzeren constructie van de machine zorgt voor een lange levensduur van het gereedschap en een goede oppervlakteafwerking van het werkstuk. De combinatie van twee schroefbandtransporteurs en een rupsbandtransporteur garandeert een volledige spaanafvoer met minimale handmatige reiniging. Bovendien wordt eindige-elementenanalyse (FEA) gebruikt voor het ontwerp van elke brugfreesmachine, waarbij de effecten van realistische omstandigheden, zoals trillingen, warmte, vloeistofstroming en andere fysieke invloeden, worden gesimuleerd. Longitudinal travel X-axe: 4100 mm Lodpoxp Sk Dsfx Ab Tohc Cross travel Y-axe: 2800 mm Travel Z-axe: 800 mm Dimensions clamping space- table: 4200 x 2400 mm Power on spindle: 30 kW Admission in millinghead (ISO): BT 50 Max speedrange: 6000 rpm

Condition: new, FACTORY NEW ROTARY TABLES // ROTARY-SLIDE TABLES Positioning, simultaneous turning, and interpolation Rotary table sizes: 1,000 x 1,000 // 1,200 x 1,200 // 1,500 x 1,500 // 1,800 x 1,800 // 2,000 x 2,000 // 2,500 x 2,500 // 3,000 x 3,000 // 3,500 x 3,500 // 4,000 x 4,000 mm --- The clamping surface can also be round instead of square - Maximum workpiece weight: 6,000 to 80,000 kg Optional sliding axis: 1,000 to 3,000 mm (in 500 mm increments) Positioning accuracy: ±5 arc seconds Lhedpfem Tv Azsx Ab Tsc Only inquiries from Germany will be answered // Nur Anfragen aus Deutschland werden bearbeitet

Condition: new, BRAND NEW NC ROTARY TABLES Working position: vertical - horizontal Applications: positioning - stepless rotation // interpolation Rotary table faceplate diameter: 500 / 600 / 800 / 1,000 / 1,200 mm – The clamping surface can also be square Max. workpiece weight (horizontal): up to 20,000 kg Max. workpiece weight (vertical): up to 4,000 kg Positioning accuracy: ± 3 arc seconds Lodpfx Abem Tvz Ds Tjhc Integration into machines with HEIDENHAIN or SIEMENS controls. Only inquiries from Germany will be answered.

Condition: used, Year of construction: 1995, incl. duplex stop, overhead control panel, 5.5 kW motor, sliding table 3200 mm, scoring unit. Saw blade diameter without scorer: max. 450 mm. Saw blade diameter with scorer: max. 400 mm. Speeds: 3000/4000/5000/6000 rpm. Digital speed display. Digital display at the parallel fence (DIGIT X). Cutting width: 1300 mm. Table extension 800 mm. Storage location: supplier. Lhedpfx Ajylxa Esb Tec

Condition: new, Year of construction: 2025, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 125 mm, cutting width (max.): 1,300 mm, saw blade diameter: 400 mm, height adjustment type: electric, rotational speed (max.): 5,000 rpm, rotational speed (min.): 3,200 rpm, total length: 3,500 mm, total width: 2,300 mm, total height: 1,700 mm, overall weight: 1,000 kg, Equipment: CE marking, documentation/manual, saw blade guard, scorer, No. 04509 Sliding table saw Casolin ASTRA 400 / NEW New, year of construction 2025 Manufacturer warranty on mechanical parts until 11.11.2026 Manufacturer warranty on electrical parts until 11.05.2026 Sliding table length 3200 mm, width 360 mm, with 2 rollers, anodized aluminium Cutting width 1300 mm Saw blade diameter 300 - 400 mm Saw spindle diameter 30 mm Saw motor 5.5 kW with motor brake Scoring blade diameter 120 mm Scoring spindle diameter 20 mm Scoring unit speed 8200 rpm Scoring unit 0,55 kW Cutting height (saw blade diameter 400 mm) 125 mm Cutting height (saw blade diameter 400 mm, cutting angle 45°) 88 mm Electric height adjustment & electric angle adjustment Electric height adjustment and alignment of the scoring unit Lhsdpfx Aeylp Dneb Tsc Speed 3200 / 4200 / 5000 rpm Digital display for speed Digital display for cutting angle 0° - 45.5° with automatic return to 0° Pivoting overhead saw guard Manual telescopic fence with 2 tiltable stops Cross table with telescopic fence +- 49° pivotable/tiltable Automatic star-delta starter Main emergency stop switch 400 V - three-phase current - 50 Hz Machine CE-compliant Incl. used saw blade, diameter 315 mm Incl. technical documentation Transport dimensions approx. 3500 x 2300 x 1700 mm LWH Weight approx. 1000 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 1983, Machine with digital readout. Lhodpfxjymalfe Ab Tec Including tool holders. Axe X: 1150mm Axe Y: 1000mm Axe Z: 600mm spindle diameter 100 mm table surface area 1000 x 1120 mm tool taper 50 SK turning speed range 4 - 1250 min-1 spindle stroke 630 mm main drive 20 kW feed range 1 - 4000 mm rapid travel range 4000 mm workpiece weight max. 3000 kg total power requirement 40 kW weight of the machine ca. 14 t dimensions of the machine ca. 6,9 x 3,6 x 3,3 m

Condition: used, Year of construction: 1996, Carriage length: 2800 mm Anodised version (new carriage) Motor 7.5 kW Automatic contactor control Digital speed display Cutting width 1000 mm Table extension 800 mm Location: Nattheim Ljdpoyapv Tefx Ab Tohc

Condition: used, Year of construction: 2015, Stationary spindle moulder Table size: 1945 x 575 mm Max. spindle projection above table: 130 mm Usable spindle length: 100 mm Max. retractable tool diameter: 180 mm Spindle arbor diameter: 30 mm Spindle speeds: 3,500/7,000/10,000 rpm Motor power: 5 kW Weight: approx. 240 kg Extraction port diameter: 2x 120 mm Location: Nattheim Ljdpfoyapvtjx Ab Tshc

Condition: excellent (used), functionality: fully functional, load capacity: 4,000 kg, Severt manual column lift and rotation device, including matching perforated table 1500 x 1500 x 200 mm for bolting, included. Optionally available with tooling for perforated table accessory set. Excellent condition (see video). Hydraulically height adjustable, minimum 800 mm, maximum 2400 mm. Load capacity 4000 kg. Perforated table 1500 x 1500 x 200 mm, type 28 mm. Lhjdpfxoyli Uys Ab Tsc

Condition: excellent (used), Rotary Table Surface Grinding Machine with Rotating Magnetic Table (Ø 400 mm) and Automatic Feed Grinding Diameter: 400 mm Round Magnetic Chuck: Ø 400 mm Grinding Wheel: 200 x 80 x 78 mm 2 Speeds: 20/40 rpm Grinding Wheel Speed: max. 2850 rpm Max. Distance between Table and Grinding Wheel: 280 mm Throat Depth: 315 mm Fine Increment: 0.01 mm Motor Power: 3 kW Dimensions (L x W x H): approx. 700 x 900 x 1800 mm Weight: approx. 550 kg The machine comes from a training workshop and is in very well-maintained condition. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 Lhsdpfjykkhljx Ab Toc DE – 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 1981, Table size: 1200 x 1000 mm Table height: 850 mm Swivel range: -5° to +45° Spindle speeds: 3000/4000/5000/6000/8000/10000 rpm Height adjustment: 120 mm Tool holder: MK5 incl. integral fence Weight: approx. 1000 kg Storage location: Supplier Lodpfex It Auex Ab Tohc

Condition: used, Year of construction: 1996, Incl. 3-roller feed, control panel on top, table extensions, pull-out support, tilting from -5° to +45°. Location: supplier Lhedpfx Aeyk U Tleb Tsc

Condition: new, Year of construction: 2025, neu 2025 030138 prompt, Zwischenverkauf v Deutschland 3444.77 € 1 13 mm MK 2 220 mm 40 - 4000 U/min 0,54 (230 V, frequenzgere kW M 10 (steigungsabhängig) 520 mm 400 mm 850 mm 62 kg 60 mm 85 - 370 mm 420 mm 300 x 250 mm 70 mm Continuous/normal drilling performance 13/15 (in E335/ST60), 12 Nm Lodpexcbhrefx Ab Tjhc Manual feed Digital speed and drilling depth display Thread cutting device Control panel with OLED display Robust, high-quality drill head cover with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drilling depth stop Continuous speed control via central rotary knob Emergency stop push button Thermal overload protection Spindle stop Drill protection with electrical protection Connection cable with Schuko plug OPTIONS: Machine cabinet with door and drawer Drill package 2 (vice & keyless chuck)

Condition: good (used), Code: 0302 Brand: ALTENDORF Model: F 45 - CE Standard CNC-controlled 3-axis panel saw with tilting blade for furniture, custom-made furnishings, panels, doors, wooden window frames, plastics, composite materials and various - CE Standard Technical data: Precise sliding double roller carriage Aluminium carriage length 3200 mm Max blade diameter 450 mm Max cutting height 150 mm Cutting height at 45° 105 mm Scoring unit blade diameter 120 mm 3 controlled axis (lifting/blade tilting/parallel guide) Electric motor adjustment 2-axis scoring unit Control panel at operator height with colour LCD screen Anodised aluminium table extension 840 mm Parallelogram blade guard Register for oblique square cuts, manual adjustment, with length compensation, end cutting up to 3500 mm Lhodpfoylhmzex Ab Tsc Blade locking system Work table height 910 mm Overall dimensions of assembled machine mm 3400 x 3400 x 1700 h Overall dimensions for transport mm 3400 x 2100 x 1700 h Weight kg 1050

Condition: used, • Machine No.: 2529 • Year of manufacture: 2021 • Automatic positioning stops for length adjustment • CNC control system with operator guidance via monitor • Integrated cutting plan display • 2 special cutting heads for laminated glass (VSG) cutting • Lower cutting head can be deactivated for float glass cutting • Automatic cutting oil supply for both upper and lower cutting heads • Cutting oil canister with fill level monitoring • Automatic breaking roller for opening the lower cut • Lowerable take-off table for opening the upper cut • Separation device with hold-downs, also suitable for LOW-E coated glasses • Continuous special heating element beneath, swiveling • Thermal-mechanical separation device for dividing multiple interlayers • Cut line marking for diagonal cuts by visible laser • Glass flow direction: right to left • Maximum cutting length VSG: 3700 mm • Maximum glass size: 6100 mm x 3210 mm • VSG glass thickness: 2x3 to 2x8 mm • Interlayer thickness: 0.38 to 3.8 mm • Working height: 940 mm +/- 20 mm • Cutting speed: 90 m/min • Cutting accuracy: +/- 0.5 mm • Length alignment: 25 mm to 3700 mm • Automatic length alignment: min. 230 mm x 800 mm Lsdpsw Uptzefx Ab Tehc • Operator-side turning device • Price on request

Condition: good (used), Baumann BSB-2 Paper Jogger The machine is 100% functional and ready to use. Technical specifications: Maximum format: 640×920 mm Stack height: 160 mm Weight: 350 kg Power supply: 400 V Ledpfxsyl Rx Hs Ab Tjhc Air table Tilt angle adjustment