Used Table Drive for sale (36,256)

Condition: used, Dimensions: 2800 x 1200 mm Bwjdpfo Adpuyex Anpjw Height: 850 mm

Condition: good (used), functionality: fully functional, Robust RAPID PK 100 table saw in a solid design, featuring a sliding table and adjustable fence system. The saw blade can be tilted up to 45°. With a saw blade diameter of 250 mm, the maximum cutting height is approximately 75 mm. The cutting width to the right of the saw blade is approximately 600 mm. The saw arbor is driven by a narrow V-belt. A saw blade is included in the scope of delivery. Technical data: Motor power: 3 kW Three-phase motor, protection class IP54 Motor speed: 2,860 rpm Saw arbor drive via narrow V-belt Saw arbor speed: 5,200 rpm Table size: approximately 850 × 700 mm Cutting width to the right of the saw blade: approximately 600 mm Bjdoz Eh Nrepfx Anpjww Cutting height: approximately 75 mm with a Ø 250 mm saw blade Saw blade can be tilted up to 45° Dust extraction port on the rear of the machine: Ø 100 mm Dimensions: approximately 800 × 1,200 × 1,400 mm Weight: approximately 250 kg Equipment: Sliding table Length/cross stop with scale Parallel fence Tiltable saw blade up to 45° Dust extraction connection Ø 100 mm Includes saw blade The machine can be inspected and tested under power after arranging an appointment. Transport is possible for an additional charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information is without guarantee.

Condition: used, FARO Mobile 3D coordinate measuring arm / Portable CMM FARO Titanium Arm 2.4 m measuring range · Single Point 0.051 mm · Volumetric ±0.072 mm For sale is a used mobile 3D coordinate measuring arm from the manufacturer FARO. The measuring system is suitable for industrial measuring and testing tasks, quality assurance, component measurement, manufacturing metrology, and for general geometric measuring tasks. Technical data: Manufacturer: FARO Model: Titanium Arm Device type: Mobile 3D coordinate measuring arm / Portable CMM Date of manufacture: 06.12.2004 Revision: 21.0 Made in Switzerland Measuring range: 2.4 m Single Point: 0.051 mm Volumetric: ±0.072 mm Certification date according to nameplate: 07.06.2016 PLANOLITH granite measuring plate: Accuracy class: DIN 876/1 Permissible deviation: 0.022 mm Bwsdsz Hm Ngspfx Anpsw Actual deviation: 0.00498 mm Test date: 03.11.2003 Weight of granite plate: approx. 460 kg Dimensions of measuring table: approx. 1200 × 800 × 940 mm (L × W × H) Total weight of measuring table: approx. 560 kg Equipment: FARO Titanium Arm PLANOLITH granite measuring plate with substructure FARO transport case Measuring probe and measuring accessories as shown in the pictures Accessories case Magnetic clamping plate Connection cable FARO manuals and documentation Software and data carriers as shown in the pictures Further accessories as shown in the pictures Areas of application: 3D coordinate measurement Quality assurance Component measurement Component inspection Manufacturing metrology Tool and fixture construction Scope of supply: 1 × FARO Titanium Arm 3D coordinate measuring arm 1 × PLANOLITH granite measuring table with substructure Transport case, measuring accessories, documentation and accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures Nameplates present The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping by freight forwarder is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: like new (used), Year of construction: 2020, Welding positioner table for sale Sale only within EU member states! Bwedpoz Rxz Rofx Anpew No private sales. MAE can be inspected upon request. All warranty rights are excluded. We assume no liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tool equipment, or for compliance with all safety and environmental protection requirements mentioned in the accident prevention regulations.

Condition: good (used), Polar Mohr RA-2 Jogger with roller and scale The machine is in perfect condition, ready to work. Bwjdpfoz N R U Hsx Anpjw Technical data: Max format: B2+ Stack height: 150mm Weight: 450kg (jogger) + 150kg (weighing device) Power supply: 400V Air squeezing roller Air table Possibility of shaking to the right/left Adjustable angle of inclination Adjustable shaking frequency (on the inverter) Adjustable force and speed of the air squeezing roller. Chrome table surface The machine is additionally equipped with a Bizerba sheet weighing system that allows for counting sheets on the machine, taring, packaging, etc.

Condition: used, GRIGGIO UNICA 400 professional sliding table panel saw, manufactured in 2014. Heavy-duty industrial woodworking machine, ideal for carpentry workshops, furniture manufacturers, cabinet makers, and woodworking production facilities. The machine features a robust construction and is equipped with a 2200 mm sliding table for accurate cutting and squaring of wooden panels, MDF, chipboard, plywood, and other compatible wood-based materials. Main Features and Technical Specifications Manufacturer: GRIGGIO Model: UNICA 400 Year of manufacture: 2014 Machine type: Professional sliding table panel saw Sliding table length: 2200 mm Power supply: Three-phase, 400 V – 50 Hz Rated current: 15 A CE marked Tilting circular saw blade from 0° to 45° Electronic adjustments with digital displays Aluminium sliding carriage with crosscut fence Rip fence and adjustable positioning stops Workpiece clamping system and hold-down devices Overhead saw blade guard with dust extraction connection Front control panel with emergency stop button Scoring saw unit visible on the machine Bjdpe Ad I T Usfx Anpoww

Condition: good (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,500 mm, table load: 10,000 kg, spindle diameter: 110 mm, spindle speed (max.): 2,000 rpm, feed length W-axis: 500 mm, workpiece weight (max.): 10,000 kg, overall weight: 23,000 kg, year of last overhaul: 2025, Manufacturer: Castel Model: Green Year of manufacture: 1997 Spindle diameter: 110 mm Spindle mount: SK50 X-axis travel: 3000 mm Y-axis travel: 1500 mm Z-axis travel: 1500 mm W-axis travel: 500 mm B-axis: 360 degrees Rapid traverse rate: 10000 mm/min Tool changer: 40 tools Bedpfx Ans Ad U S Ropeww Coolant system Table dimensions: 1500 x 1250 mm Spindle taper: DIN 69871-40 - ISO 50 Spindle power: 27 kW Table load capacity: 10 tons Number of gear stages: 2 Control system: HEIDENHAIN TNC 415 Axes overhauled in 2025 Rotary table overhauled in 2025 Chip conveyor Dimensions (length x width x height): approx. x 7100 x 7500 x 3700 mm Total weight: 23 tons

Condition: excellent (used), Year of construction: 2008, Hanging, swiveling control panel with document holder 5.7" touchscreen control Variable saw blade speed 2-axis scoring unit, electrically adjustable Parallelogram crosscut table with ‘RadioCompense’ miter and length compensation system Pre-set indexing points for 0°, 22.5°, 30°, 45° on the parallelogram crosscut table Rip fence with stop flap and digital length display Extendable parallelogram crosscut table with support roller Parallel stop can be lowered under the table in the end position Table extension 600 x 400 mm with integrated storage compartment “ProLock” quick-change system for saw blades Central lubrication including miter stop for cutting acute angles Sliding table length: 3000 mm Cutting width: 1100 mm Cutting width at the rip fence: 3400 mm Cutting height: 170 mm Bsdpfe Aaz E Ajx Anpjww Saw blade diameter max.: 500 mm (400 mm with scoring unit) Saw blade speeds: 2000 - 6000 rpm Saw blade tilt: 0 – 46° Motor power: 7.5 kW, 400 V, 50 Hz Working height: 900 mm Dust extraction connection: 80 and 120 mm Transport dimensions approx. L x W x H: 3550 x 1850 x 1620 mm Weight approx.: 1800 kg

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Manufacturer: Duplo / FKS Model: PFi Blade B2+ Category: Digital flatbed cutting plotter Year of manufacture: 2023 Condition: Like new TECHNICAL DATA & FORMAT: Bwsdez Rkqkspfx Anpjw - Max. sheet size: 800 x 600 mm (B2+) - Min. sheet size: 210 x 297 mm (A4) - Max. material thickness: up to 1.3 mm (approx. 1000 g/m²) - Feeder: Automatic vacuum belt feeder - Feeder stack height: 100 mm FEATURES & EQUIPMENT: - Multi-tool head (cutting, scoring, creasing) - Oscillating knife for thicker materials (corrugated board, honeycomb board) - Tangential / drag knife - Creasing wheel - CCD camera system for automatic register mark & QR code recognition - Vacuum table for sheet fixing - Inclined discharge / sheet discharge - PFi Blade PC software incl. control unit

Condition: good (used), functionality: fully functional, Internal article number: 26090 Rotary table top Diameter: 380 mm Direct and indirect division possible Well-maintained original condition Minor milling marks on the surface, but these are not deep. Bsdpfxsz Hauvs Anpoww The rotary table comes from an educational institution and is in a well-maintained condition.

Condition: good (used), functionality: fully functional, Internal article number: 26091 Round table cover Diameter: 300mm With optics. No connection cable included. Well-maintained, original condition. Bwedoz Ha Aaepfx Anpjw The round table comes from an educational institution and is in good condition.

Condition: good (used), Equipment: foot remote control, The rotary table is motor-driven and features a foot switch; the clamping range can be adjusted to suit any component. Upon request, a perforated table of any size can be supplied. 3000 kg load capacity, motor-driven braking system. One side is driven, the other side rotates passively. Bsdpfx Ansz Hvl Rspsww Center height from the floor: 1000 mm, mounting plate size: 700 x 450 mm. Two sets of the same size are available.

Condition: good (used), Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table, low-profile lift table, scissor lift truck Bwedpfjz Dugujx Anpjw -Manufacturer: Hanaoka, hydraulic scissor lift table trolley, scissor lift trolley type L-150 -Load capacity: 150 kg -Platform: 710 x 450 mm -Dimension when retracted: Height 220 mm -Extended dimension: Height 720 mm -Transport dimensions: 810/450/H230 mm -Weight: 38 kg

Condition: good (used), Baumann BSB 3L Paper Jogger The machine is 100% functional and in very good condition. This is the latest design from a German manufacturer. Bodpfx Anez R Ipwopeww Technical specifications: Maximum format: 1150x900mm Stack height: 160mm Weight: 550kg Power supply: 400V Air squeezing roller Air table Tilt angle adjustment Jogging frequency adjustment (inverter) Adjustable air squeezing roller force and speed. Chrome-plated table surface

Condition: good (used), Year of construction: 2020, Gearmotor - Nord Drivesystems - 0.75 kW - 4 RPM - Type SK 9043.1VF-80LP/4 Bwjdpez Sk Rhjfx Anpjw - Year 2020 - Weight 160 kg - Price stated is per unit.

Condition: excellent (used), For sale: a CNC rotary table from the renowned Fadal Engineering (USA) brand, model VH65. A professional 4th axis designed for machining centers, especially Fadal VMCs, but it can also be integrated with other CNC machines using a suitable controller. Technical specifications: • Model: VH65 • Table diameter: 165 mm (6.5”) • Gear ratio: 90:1 • Pneumatic brake (M60 ON / M61 OFF) • Industrial multi-pin connector • Serial number: 4630298 Condition: used, mechanically sound, with normal signs of wear. Solid and heavy construction – ideal for precise 4-axis machining. Bsdpfxsz Slc So Anpeww

Condition: excellent (used), ///// PRICE INDICATED IS FOR 1 UNIT ///// Manufacturer: ALGRA Type / designations: Bwjdpfx Aoz Smp Tsnpow D3A030012 D3A030011/6-3 23-1151-012 I offer ALGRA drive gearboxes used in metalworking machine tools. These components serve the function of power transmission and feed rate adjustment, and are most commonly used in: conventional milling machines machining centers industrial machines as drive modules Robust, heavy-duty construction – typical components for continuous operation in industry. ⚙️ Technical condition Condition: used Shows normal signs of use Mechanically complete Knobs and mechanisms are functional Possible signs of storage 📦 Included ALGRA gearbox (exactly as shown in the pictures) 📏 Application drive for axis feed (X/Y/Z) drive systems for machine tools spare parts for milling machines and industrial machines maintenance / servicing of machines ℹ️ Additional information Markings stamped on the housings (visible in the pictures) Inspection labels "QS-IN PRÜFUNG" Oil-lubricated construction (closed gearbox) Individual sale possible 🚚 Shipping Shipping by courier or on a pallet Personal collection possible

Condition: excellent (used), I offer a professional sine magnetic table from the renowned German company K. JUNG GmbH Göppingen. This device is designed for the precise clamping of parts during grinding, measurement, and tooling operations. Specifications: • Manufacturer: K. JUNG GmbH Göppingen • Type: Sine magnetic table (tilting) • Magnetic workpiece clamping • Adjustable tilt angle with angular scale • High precision • Robust cast iron construction • Original wooden transport case Included in the set: • Magnetic table • Original wooden case • Documentation and setting table Bwodpfx Anez Sm Hxspjw • Clamping elements as shown in the photos • Operating keys Condition: • Used item • Magnetic surface in very good condition • Normal signs of use and storage • Complete set as shown in the photos Ideal for: • Tool grinders • Surface grinders • Tool rooms • Precision workshops • Production and maintenance The item sold is exactly the one shown in the photos.

Condition: used, Mitsubishi NF400-CS Circuit Breaker – 400 A For sale is a used Mitsubishi Electric NF400-CS circuit breaker. Manufacturer: Mitsubishi Electric Type: NF400-CS Bwedpfxsz Euywe Anpsw Rated current: 400 A 3-pole Voltage: 600 V AC Condition: Used Removed from a fully operational machine Fully functional up to removal Sold as pictured Signs of normal wear from use

Condition: new, Features: 5-axis electronic control overhead control panel, rotatable electronic adjustment for scoring unit automatic rip fence with movement on screw and ball pushing linear guide start / stop pushbuttons integrated in the carriage “Quick Lock” squaring fence sliding carriage with 'arc' profile - 10 years warranty telescopic swing arm made of large dimensioned extrusion and linear guide on recirculating ball bearings Technical Data: saw blade DM mm 550 scoring unit blade DM mm 120 squaring capacity mm 3200x3200 tiltig capacity deg. 0 +46 max. cutting height at 90° mm 200 max. cutting height at +45° mm 130 saw blade speed RPM 2500, 3500, 5000 scoring unit blade speed RPM 8500 DM suction connections mm 120 & 100 main motor Hz 50 kW 7,0 Bwjdpjcrnm Njfx Anpow scoring unit motor Hz 50 kW 1,3 cutting capacity right side mm 1500 incl. following options: 570335 "Pro-Lock" system for quick changing of main saw blade without tools

Condition: new, Year of construction: 2024, load capacity: 300 kg, Welding rotary table KT 300 Horizontal load capacity: 300 kg, tilted: 150 kg Power supply: 220 V, 50 Hz Table diameter: 450 mm Height: 500 mm Tilting range: continuously adjustable via crank gear motor, 0 - 90° Speed: 0.3 to 2.5 RPM Includes foot pedal remote control Optional extra: Quick-release chuck Diameter: 300 mm, €450 Bedpfx Aec Ug Tlsnpjww

Condition: good (used), Extremely practical, heavy-duty table, good quality. Welding rotary table, 100 kg load capacity. Maximum load: 100 kg horizontally. Maximum load: 50 kg vertically. Rotation speed: 0.5-9 rpm. Rotation direction: left and right. Bedpfx Ascctnaonpeww Rotary table speed: manually adjustable. Rotary table diameter: 345 mm. Rotary table height: 415 mm. Rotary table tilt angle: 0-90°. Motor power during operation: 0.12 kW. Dimensions: 500 x 470 x 415 mm. Power supply: AC 110V / 220V 50/60Hz. Optional with jaws, additional cost: 160. Delivery to your doorstep: 80.

Condition: new, Dimensions (L,W) , mm Weight ca. 90 kg adjustable height (yes/no) ja stroke 300 - 800 mm surface of working table 1.700 x 1.500 mm table width max. 3.800 mm 0 ca. 130 kg Ruchser RU-4-SSP rotary-tilt table ----- Support surface 1700 x 1500 mm, maximum Table width swung out 3800 mm, pneumatically tiltable, weatherproof recess, with 6 storage boxes, each with 2 compartments, pull-outs below for widening, with 2 support feet and 2 flat clamping cylinders, Lifting device from 300 - 800 mm, Roller conveyor as a surface, foldable. Payload capacity 130kg. Driving device with 4 swivel castors Stop device (RU-4SSP) 2 stops for final inspection and To seal Wing assembly device with tool tray and adjustable stop for Inclination for RU-4-SSP Holder for drill, screwdriver gun etc. with screwdriver quiver Driving device with flanged rollers RU-DKFA and RU-4SSP Bwedpfxjvu Hfde Anpow 3 double meter rail for Driving device 25 x 10 mm ----- Price of the above machine on request! plus packaging and shipping ----- (technical data according to manufacturer - no guarantee!)

Condition: used, Corpus lifting and aligning device Bjdpjvdcmvjfx Anpeww Strip-feed table with lifting and aligning device Fezer vacuum lifter Control system: Mitsubishi Melsec Dimensions: 3600 x 1200 x 930 mm You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: used, You are purchasing an ironing system. Presse Vite ironing/steam table, with 4 height-adjustable Whirlpool hoods and 2 steam generators. Working width approx. 340 cm. 9000W Year of manufacture: 2002 223-380V Pr12LP Control unit: GE VAT20 U20NOK7S Bjdpeu Nyu Ssfx Anpeww You can find more items in our shop!