Used Timber Drying Kiln for sale (3,068)

Condition: new, Type CSD-HT-BR 70 Internal dimensions (width x depth x height) 7500 x 7160 x 4100 mm External dimensions (width x depth x height) 8080 x 7760 x 5500 mm Gbodsrxtuiopfx Aa Ask The section of the structural columns of the chamber is 160 x 70 mm Snow load for the roof is 80 Kg/m2 Wind resistance of walls 27.8 m/sec Warming with glass wool Walls ǂ100mm Roof ǂ100mm Door ǂ100mm Door: sliding type, hung on a rail Wood for drying: various Loading the drying chamber with a forklift The heating system is gas Fuel - GPL gas Maximum thermal energy (300 kW) Maximum chamber temperature 75 °C The number of fans in the chamber is 5x3kw The total capacity of the fans is 162,500 m3/hour Number of probes: 4 HT/ 8 AWM/ 2 EMC/ 2 Temperature Voltage 400 V 50 Hz Total power 17kw)

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 6381/99, 2 connected kilns, timber volume, each 142m3 , total = 284 m3 concidering: Gbsdpfx Aaowynnis Ajk - 50x100 boards, stacking factor 0.85 - each kiln 24 stacks 4.2x1.2x1.2m + 12 stacks 5.1x1.2x1.2m ; 1m free space in front and 1m behind the stacks, 0.15m between the stacks - inside dimensions of each kiln: width 15.2m (3 stacks), depth 7.3m (4 stacks), height 4.1m (3 stacks) - dimensions of loading door 15.2x4.1m , lifting-sliding type of 2 pcs. Inspection doors in rear walls. - loading system frontal forklift , 2 sliding trolleys for the loading door of lifting-sliding type Heating power 610,000 Kcal/h at 60'C inside temperature. Heating system: hot water, 90'C at inlet min, bi-metal pipes, stainless steel core with external aluminium fin, including the automatic valve for the hot water with intercept valves and stainless steel pipes till rear wall of dryers Rehumidification: cold water 3.5 bar, 150l/h. The spraying device by stainless steel pipe and changeable nozzles on brass. Number of fans each kiln, installed in long aluminium pipes (Nardi patent): 12 , reversible, 800mm, changed power motors 4.0/1.1kw, two speeds. Long pipes increase the air flow, reducing the pressure drop, saving energy. The horizontal aluminium baffles closing the free space over the stacks Number of vents each kiln: 8+8 cast aluminium vents Snow load 120 kg/m2, wind speed 100 km/h The electric switchboard cabinet per each kiln. Voltage: 400V , 50Hz . Type of control: LEONARDO 3000 (renewed in 2007) Each kiln has 12 wood moisture probes, 2 kiln temperature probes and 2 kiln relative moisture probes, 3 digital read outs of these values. Dismantling will be done by buyer. Seller provide a forklift if needed.

Condition: excellent (used), Wood dryer from the Italian company OS PANTO 4 chambers – each: - width: 16.9 m - length: 13.5 m - gate height: 5.9 m Batch capacity per chamber approx. 270 m³ Complete with full documentation, automation, Gedpfxoyw H H Eo Aa Aebk ALENT control software

Condition: new, No. 3171 Vacuum drying kiln ISVE ES 2 / NEW New machine, delivery time 120 days Construction features: AISI-304 stainless steel, partially insulated External diameter: 1000 mm Length of cylindrical part: 5000 mm Dryer length: 5900 mm Dryer total length plus sliding guides: 11000 mm Max. operating vacuum: -730 mm Hg Timber pile length: 5000 mm Timber pile width: 800 mm Timber pile height: 400 mm Net wood volume: approx. 2 m3 Installed electrical power: 5,27 kW Average hourly power input: 2,7 kW/h Includes: - 6 electric heating plates (each 800 x 5000 x 10 mm LWH / 40 kg / 0,695 kW) - 1 oil vacuum pump (40 m3/h / 1,1 kW / 380 Vca) - 1 vacuum pump condenser (stainless steel tube with internal condensation system) - 2 one-way valves (clapet: one ¾” for vacuum circuit; one ½” for condenser discharge) - 1 solenoid air return valve (24 Vca: one 1” for the autoclave and one ½” for the condenser) - 1 manual air return (1” ball valve) - 1 electrical control panel (PLC type Siemens S7-1200, with touch panel) Godpfx Ajuvi Saja Aobk - 1 ISVE server connect with remote service and control - 2 wireless moisture probes (double probes for core and surface moisture reading) - 1 wireless temperature probe (for wood core reading) - 2 plates-holder stands - 1 instruction booklet (in English with CE certificate and wiring diagrams) Transport dimensions approx. 6100 x 1150 x 1300 mm LWH Weight approx. 1300 kg Technical details, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale New machines are covered by the manufacturer's warranty Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Year of construction: 2013, condition: ready for operation (used), A heating and drying oven Horo is available. Connected load: 12.5kW. Max. temperature: 120°C. Heating power: 12kW. Volume: 2736l. Documentation available. An on-site inspection is possible. Gbjdpfx Aeyrtaysa Ajk

Year of construction: 2013, condition: used, Drying chamber with false ceiling ventilation and frontal trolley loadingfor the production and conditioning of 3 mm oak lamellas, at initial moisture 12 tomax. 15 % / final humidity 7 %used, good conditionmake Mühlböcktype ZSWM2110-1180C - 1.0 l/h at 40° C over 30 % HFyear of construction 2013rated power 7 kW/15Afrequency 50 Hzcontrol voltage 24VDC/230VACprotection class IP54content:the chamber holds- 2 packages in width a 1.10 m - with 0.20 m space between each package- 1 package in height a 1.80 m - with 0.10 m thick underlays and a 0.10 m high free space- 2 packages in length a 2.20 m - plus 0.60 m free spaceThe chamber contains 4 stacking packages and has a total gross volume of 17.4 m²The chamber has a net capacity of 4 m³ of timber - with a timber thickness of 3 mm and a stacking strip thickness of 10 mmand 90 % width utilization with edged ble dimensions of each chamber: Width 2.40 m x height 2.30 m x length 5.00 m- aluminum cassette construction- aluminum frame- dimensionally stable rock wool insulation- aluminum trapezoidal sheet- snow load 100 kg/m²- 2-leaf hinged door- front loading- 2 fans a 3 kW (D=800 mm)- stainless steel/aluminum finned tube heating coil with 50 kW, flow temperature of 80 °C, return temperature 73°C- servo-controlled supply and exhaust air flaps- cold water spraying- chambers work fully automatically- computer control K5Disassembly: Customer locationhandover as viewedwithout guarantee and warranty Gbjdpfx Aasvwfhie Aok

Condition: new, Capacity: 3 to 20 m³ — the ideal “pocket” system for small and medium-sized producers Product Description: The Mobileplan is a high-quality, fully mobile drying kiln designed for maximum versatility. Engineered for rapid deployment and user-friendly operation, it can handle all wood species and greatly simplifies both timber drying and ISPM-15 pallet heat treatment without requiring a fixed installation. Plug-and-play setup: No permanent anchoring required. Easily movable by forklift or crane. Ultra-fast installation: Delivered pre-assembled and factory-tested; ready for operation in less than one day. Fully automatic operation: Automated control of drying cycles for true set-and-forget convenience. Heating options: - Electric - Hot water / steam - Gas Key advantages: - Compact, transportable design for genuine mobility Gjdpow Hf Adefx Aa Aebk - Installation within 24 hours – reduces set-up time and labor costs - Pre-assembled unit minimizes transport and assembly expenses - Suitable for drying both softwood and hardwood, as well as ISPM-15 compliant pallet treatment - Low running costs thanks to the modular plug-and-play system - Industrial-grade reliability in a compact form factor Mobileplan is the ideal solution for professionals seeking a premium drying system that offers mobility, rapid commissioning, and low operating overheads—perfect for workshops, small sawmills, or on-site operations.

Condition: excellent (used), I am selling wood drying kilns in very good condition. Gsdpfx Aasxf Nybs Asbk

Year of construction: 2019, condition: used, We are offering this used German Kiln Technology HERDWAGENOFEN car kiln, year of manufacture 2019. Reference number: 118004 Year of manufacture: 2019 Operating voltage: 3 × 400 V Current: 64 A Frequency: 50 Hz Fuel: natural gas Calorific value: 10.3 kWh/Nm³ Thermal output: 1650 kW Gas operating pressure: 8 kPa Air operating pressure: 10 kPa Air preheating: 550 °C Kiln temperature: 1500 °C TNV temperature: 930 °C Usable volume: 4.3 m³ Gbjdoycvxmjpfx Aa Aek If you have any questions or require further information, please feel free to send us a message or call us.

Condition: like new (used), Line for cleaning and drying (roasting) sesame seeds, pumpkin seeds, coffee seeds etc. Machine: throughput 15-30 t/h cyclone filter with pre-screen and descaling agent chaff silo fluid bed dryer final cleaning of seeds using the Storex Z+ optical sorter Perfect condition! Gbjdpjyycukofx Aa Ask

Condition: like new (used), RR120 is a high-volume system for printing, coating, inspecting, and drying rolls. Its modular design offers flexibility for specific applications and needs Reel to Reel Handling System 7 Dispensing Channels (Tandem Pumps Bio-Jet, Front Line and Air Jet Dispensing Technologies Print up to 7 Lines Simultaneously Automated Dispense Tracking for Precision Line Placement Gbodpfeya Hvqsx Aa Ask Perform Multiple Applications on One System Adjustable Tension for Handling Backed/Unbacked Membranes Easy to Set up, Operate and Maintain Data Storage to Support Multiple Applications Many System Options Can be Upgraded after Purchase

Year of construction: 2015, operating hours: 8,286 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: Drymex S 5, Beautiful, robust drying system consisting of 2 units, 1 large stainless steel drying chamber with perforated floor, including piping and the Blue Evolution XL steam cleaning device from Beam. Ideal for gentle drying of food products (herbs, tea, wheatgrass), low-temperature drying with electricity (below 40°C), permitted for indoor use only. The individual segments of the perforated floor can be lifted up separately for cleaning. Excellent condition, very solid construction. Dimensions: Units – 1.95 x 1.25 x 2.00 m, Drying chamber: 7.40 x 2.67 x 2.50 m. Stainless steel: 1.4301. Unit 1: Year of manufacture 2012, Unit 2: Year of manufacture 2014, Drying chamber: Year of manufacture 2015. Price negotiable. Gedeyffqqspfx Aa Aobk

Condition: new, Year of construction: 2025, An active lime production line is a set of equipment designed to produce high-quality lime from limestone, with the aim of meeting various industrial applications, such as in the production of steel, environmental desulfurization, and other processes. The process typically involves several stages, including limestone crushing, calcination, hydration, and finally, the production of active lime. Here is a general overview of the main steps involved in an active lime production line: 1. Limestone Quarrying: - Raw limestone is extracted from quarries and transported to the lime plant. The limestone may undergo crushing and sizing processes to achieve the desired particle size. 2. Limestone Preheating: Godpfx Ajq Nyzboa Aebk - The raw limestone is typically preheated in a preheater or precalciner before entering the rotary kiln. This preheating step helps to reduce the energy consumption in the kiln by partially decarbonizing the limestone. 3. Loading into the Rotary Kiln: - The preheated limestone is loaded into the rotary kiln, a large, rotating cylindrical furnace. The kiln is inclined at a slight angle to facilitate the movement of materials through the kiln. 4. Calcination: - In the rotary kiln, the limestone undergoes high-temperature calcination (typically in the range of 900 to 1,450 degrees Celsius). This process causes the limestone to undergo chemical and physical changes, converting it into lime (calcium oxide). 5. Cooling: - After calcination, the lime moves through the cooling zone of the kiln, where it is cooled down. This cooling step is essential to stabilize the lime and prepare it for further processing. 6. Hydration: - The quicklime produced in the kiln is then slaked with water in a hydration process to produce slaked lime (calcium hydroxide). This is typically done in a separate hydrator. 7. Separation of Unreacted Lime: - The slaked lime is separated from any unreacted quicklime or impurities. This step ensures that the final product is of high quality. 8. Filtering and Drying: - The separated slaked lime is filtered to remove excess water, and the resulting product is dried to achieve the desired moisture content. 9. Storage and Packaging: - The final product, active lime (calcium oxide), is stored in silos or other storage facilities. It can then be packaged for sale or transported to end-users. 10. Environmental Considerations: - Dust collection systems and other environmental control measures are often implemented to minimize emissions and ensure compliance with environmental regulations. The design and configuration of an active lime production line can vary based on factors such as the type of limestone used, production capacity requirements, and specific industrial applications. Modern production lines often incorporate advanced technologies to optimize energy efficiency, minimize environmental impact, and ensure high-quality active lime production.

Condition: not inspected (used), functionality: unexamined, inner dimension height: 670 mm, inner dimension length: 600 mm, inner dimension width: 600 mm, machine/vehicle number: 5096-10, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to timely collection, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Gbsdpfx Asyn E Eyoa Aok Internal dimensions: 600 x 600 x 670 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,000 x 700 x 2,000 mm Weight: 400 kg External Reference: Pieper – Lot 139

Condition: new, Volumes: available in 10 m³ or 20 m³ versions Product description: The Easyplan is a compact yet powerful drying system designed for both softwood and hardwood drying, as well as for ISPM-15 compliant pallet and wood packaging heat treatment. It guarantees full phytosanitary compliance and consistently provides high-quality drying results across a wide variety of timber species. Godew Hfzaspfx Aa Aebk Installation is completed in less than one day, making it ideal for rapid deployment in small to medium-sized production facilities. The process is fully automated: simply load the kiln and let the system manage the entire drying or heat treatment cycle. Available heating options: - Electric - Gas - Hot water / steam Key benefits: - Capacities of 10 m³ or 20 m³ to match different production requirements - Suitable for both softwood and hardwood - ISPM-15 compliant pallet and wood packaging heat treatment - Fully automatic drying process - Fast installation in under 24 hours - Flexible heating solutions to suit available energy sources Easyplan is the ideal solution for companies seeking a compact, fast-to-install timber drying and ISPM-15 pallet treatment system that does not compromise on performance or quality.

Condition: used, Polymer Recovery, Dremel Style plastic washer and spin dryer vibratory screener, gas blower system, sink float tank and feed hopper with augers, feed hopper will need to be removed from I-beam frame, unit is bolted and welded to frame (does not include lower I-beam frame), includes all control panels, winning bidder responsible for proper disconnection and removal of machine. Gjdpsxd D I Rofx Aa Aebk

Condition: excellent (used), Year of construction: 2011, Dry air dryer FarragTech CARD 10 S with container and 2 x suction conveyors ICEVA GS-4mD Stock no.: 503577 Machine type / Device type: Dry air dryer Manufacturer: FarragTech GmbH Type: CARD 10 S Year of construction: 2011 Godpfx Ajy Akk Ssa Aebk Container volume: 10 ltr. Throughput: 2 h / 3.25 kg / 80° ABS Power: 1.1 kW Voltage: 230 Volt Hopper volume: 70 ltr Accessories: 2x suction conveyors ICEVA GS-4mD

Condition: good (used), mileage: 761,327 km, power: 405 kW (550.65 HP), first registration: 05/2016, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 6x4, wheelbase: 4,300 mm, fuel: diesel, color: red, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 9,700 mm, total width: 2,550 mm, total height: 4,050 mm, loading space length: 5,900 mm, loading space width: 2,260 mm, loading space height: 2,600 mm, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, crane, cruise control, electric window regulation, parking air conditioner, power mirror, seat heater, traction control, trailer coupling, - Heated mirrors - Digital tachograph - Tachograph (control device) - Globetrotter XL - LED lamp - Alloy wheels - Manual - PTO (power take-off) - Pump - Radio/cassette - Lane departure warning system - Fabric Number of axles: 3, Configuration: 6x4, Twin tires, Unladen weight: 14,120 kg, Gross weight: 30,000 kg, Total tank capacity: 650 liters, Trailer coupling, Kingpin diameter: 40 DIN, Chassis height: 105 cm, Number of difflocks: 2, Alloy wheels, Suspension type: Full air suspension, Cab type: Globetrotter XL, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Standby air conditioning, Electric windows, Electric mirrors, Radio/cassette, Color: Red, Heated mirrors, Lighting type: LED lamp, Lane departure warning system, Climate control, Seat heating, Warning lights, Engine power: 405 kW (543 hp), Fuel: Diesel, Euro: 6, Transmission: I-Shift, Gears: 12, Power steering, ABS, ASR, PTO, PTO type: 1, Starter battery, Pump, Central locking, Seat arrangement: 1+1, Seat material: Fabric, Seat adjustment: Manual, Crane, Crane make: Palfinger M110Z, Crane year: 2016, Crane lifting capacity: 11, Max load: 1,160 kg at 8m., Number of outriggers: 2, CE certified, Control position: top operation, Crane position: rear-mounted, Sliding: 2, Hydraulic additional connections: none, Rotor, Log grapple Axle Configuration Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire size: 385/65R22.5; Steered; Tire tread left: 5 mm; Tire tread right: 11 mm Axle 2: Tire size: 315/80R22.5; Twin tires; Tire tread left inside: 8 mm; Tire tread left outside: 7 mm; Tire tread right inside: 7 mm; Tire tread right outside: 7 mm Axle 3: Tire size: 315/80R22.5; Twin tires; Tire tread left inside: 7 mm; Tire tread left outside: 7 mm; Tire tread right inside: 2 mm; Tire tread right outside: 6 mm Weights Unladen weight: 14,120 kg Payload: 15,880 kg Gross vehicle weight: 30,000 kg Functional Gbjdpfxexp Edqe Aa Aok Crane: Palfinger M110Z, year 2016, rear mounted on chassis Loading platform height: 136 cm Pump: Yes Condition Technical condition: Good Optical condition: Good Damages: None Number of keys: 3 Identification Registration: KLEYN1 Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range covers all European brands, years, and price levels. Why buy at Kleyn Trucks? It's easy! • Large, rapidly changing selection • Recognizable quality • Good prices • Correct business conduct • We speak many languages • We understand our customers • Assistance with import and transport • (Export) plates quickly arranged • Competent technical services • The security of 'recognizable quality' • And more... Please visit our website for special offers and the complete inventory: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send an inquiry via our website.

Condition: used, Year of construction: 2018, Empty weight: 400 kg Gbsdpfx Aaoyuga Es Ask Dimensions (LxBxH): 160 x 130 x 130 cm Price: On request - Details: - └ Description: Includes tank and dryer - Year: 2018 - Documentation available: No - CE certificate present: No - Transport dimensions: 1600mm x 1300mm x 1300mm (l x w x h) - Transport weight [kg]: 400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), CATALOG NUMBER 7753 TECHNICAL SPECIFICATIONS - max diameter of machined dowels: 130mm - installed bushing: 110mm - max diameter of input material: 160mm - min length of input material: 800mm - max machining allowance per side: 15mm - cutter head drive motor: 15kW - 3 feed speed options + forward/reverse - feed motor: 1.1kW Configuration: - 3 toothed feed rollers - 3-knife cutter head - 3 smooth discharge feed rollers - dimensions (L/W/H): 3100x1400x1500mm - weight: 2100kg Gsdpfoxhddgjx Aa Aebk ADVANTAGES – made in Poland – 3-knife cutter head – used rounding machine, very good condition Net price: PLN 36,900 Net price: EUR 8,780 based on an exchange rate of 4.2 PLN/EUR (Prices may vary with significant fluctuations)

Condition: used, Year of construction: 2005, inner dimension length: 14,000 mm, inner dimension width: 1,250 mm, inner dimension height: 1,850 mm, total length: 15,900 mm, total width: 2,500 mm, total height: 3,000 mm, overall weight: 12,000 kg, Equipment: CE marking, No. 3262 Vacuum dryer / drying chamber Kronseder KCT 2400 Used, year of construction 2005 The machine was in operation until 2024 and remains connected to electricity and hot water until July 2026 Capacity approx. 32 m3 Heating via hot water Stainless steel chamber Chamber diameter approx. 2000 mm External length of chamber approx. 15000 mm Internal length of chamber approx. 14000 mm Width of wood stack 1250 mm Height of wood stack 1850 mm Transport dimensions approx. 15900 x 2500 x 3000 mm LWH Weight approx. 12000 kg Sale on behalf of customer, ex location near 34125 Kassel, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Gbedpfxeyy R D Tj Aa Ajk Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: CryoMax Eco 17Y110-01, New (demo machine) purchased and used once at a customer site for a short demonstration! Gbedpfxjx Dkags Aa Aek

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw Gbjdpfx Aaeyywf Rj Ask

Condition: used, Dry cleaner/ Friction cleaner Gbsdpfx Aoyywfqsa Aek with 110 kW drive power. Throughput max. 4t/h depending on type of plastic and material thickness

Condition: new, axle configuration: 2 axles, suspension: steel, color: other, Suspension: leaf spring suspension Rear axle 1: Tyre tread left: 100%; Tyre tread right: 100% Rear axle 2: Tyre tread left: 100%; Tyre tread right: 100% Gbodpjyzgmmjfx Aa Ask Damages: none