Used Tos Su 50 for sale (36,338)

Condition: used, Year of construction: 1983, Bohrleistung in Stahl (-Ø 50 mm throat 1500 mm workpiece height max. 1380 mm Bohrleistung in Guß (-Ø 60 mm Abstand Spindelmitte bis Säule 320 - 1250 mm swival range +/- 180 ° base plate surface area 2640 x 1000 mm Gjdpfx Aotv Iklsn Ejui max. torque on the spindle 310 Nm Bohrspindel-Ø/ Aufnahme 75 mm /MK 5 bore spindle stroke 310 mm spindle turning speed range 28 - 2500 U/min feed: 0,05 - 2 mm/U power capacity 4 kW weight of the machine ca. 4,3 t dimensions of the machine ca. 3,2 x 1 x 2,75 m cube table 500 x 500 x 500 mm

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 0443848, center height: 625 mm, center width: 8,000 mm, spindle speed (max.): 355 rpm, bed width: 800 mm, TECHNICAL DETAILS Swing diameter over bed: 1,250 mm Swing diameter over slide: 1,100 mm Guodpfx Ajy Hit Hen Eei Center height: 625 mm Distance between centers: 8,000 mm Bed width: 800 mm Spindle bore: 1,100 mm Spindle speed range: 1.8 - 355 rpm MACHINE DETAILS Power: 30.0 kW Dimensions & Weight Dimensions (L x W x H): 10,730 x 1,600 x 2,400 mm Unladen weight: 12,000 kg Transport packages: 3 EQUIPMENT Fixed steady rest Four-jaw chuck Three-jaw chuck

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 844 12 64, turning diameter over cross slide: 215 mm, spindle bore: 40 mm, turning diameter: 380 mm, center height: 190 mm, center width: 1,250 mm, quill stroke: 120 mm, total length: 3,020 mm, total width: 950 mm, total height: 1,500 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 14 rpm, overall weight: 1,850 kg, quill mount: MK 3, workpiece weight (max.): 300 kg, Trade show lathe, available from stock. After Trens filed for bankruptcy, we made an effort and had TOS and later Trens lathes completely overhauled. All machines were disassembled down to the last screw. Here is a run-through of a general overhaul at our company: 1. Machine cleaning, disassembly of the individual machine components 2. Grinding: bed, slide, cross support, spindle, tailstock quill Gusdpov Hzqxjfx An Eoi 3. Grinding + scraping of the upper support guideways, replacement: trapezoidal screw with nut and V-ledge 4. Scraping of the guide surfaces: spindle, slide, cross support, and tailstock to geometric positions according to the accuracy report 5. Replacement: screw with nut, V-ledge, and Multifix base body for the cross support (including 2 turning tool cartridges) 6. Complete disassembly and replacement of the necessary spare parts in the lock case, threaded housing, headstock, gear box, tailstock, cross support, and upper support 7. Installation, replacement if necessary, of racks, repair of the lead screw and feed screw 8. Complete bearing replacement in all machine assemblies 9. Complete replacement of machine plates 10. Priming of the machine, sealing, sanding, polyurethane topcoat, and painting of the machine accessories - white RAL 9003, anthracite RAL 7016 11. New control cabinet with electrical components, replacement: main motor, rapid traverse motor, hydraulic pump, cabling, and LED lighting of the work area 12. Preparation of the accuracy report and the electrical test report 13. Inspection and machine acceptance at the factory All refurbished machines have a CE certificate and a 12-month warranty. CE version: - Chuck guard with limit switch - Front chip guard mounted on slide - Rear chip guard - Lead screw and feed screw covers - Brakes after emergency stop within 2 seconds Special accessories (used): - Three-jaw lathe chuck Ø 190 mm - Four-jaw lathe chuck Ø 190 mm - Three-jaw lathe chuck Ø 240 mm - Four-jaw faceplate Ø 320 mm - Support center for bed slide - Various chuck jaws (10 pieces) - Collet set Ø 2 - 25 mm with collet chuck + drawbar - Special collet set (10 pieces) with collet chuck - 4-way tool holder

Condition: excellent (used), CATALOGUE NUMBER 7134 TECHNICAL DATA - max planing width 500mm - max planing height 190mm Top: - feed rollers - infeed roller, sequential - pressure rollers, 2 rows - infeed roller, sequential - planing roller 500mm, 4-knife, 7.5kW motor - pressure rollers - outfeed roller, smooth - pressure roller on the outfeed Bottom: - adjustable infeed table + pressure roller - smooth feed roller - planing roller 500mm, 4-knife, 5.5kW motor - 2 smooth feed rollers - side pressure roller Rear: - side spindles 1) vertical right 140mm 4kW 2) vertical left 140mm 4kW - spindle diameter 40mm - spindles adjustable up/down, right/left - stepless feed speed adjustment 8-30m/min - electric table lifting - dust extraction nozzle diameters 2x145mm, 2x160mm - dimensions L/W/H 2050x1700x1700mm - weight 2100kg ADVANTAGES – ideal for processing flooring panels – electric table lifting – Czech production – used planer, very good condition Gedozxhdfjpfx An Eeui Net price: 37900 PLN Net price: 8814 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to higher fluctuations)

Condition: new, Year of construction: 2025, functionality: fully functional, Swing dia over bed 500 mm Swing dia over cross slide 270 mm Swing dia in bridge 700 mm Length of bridge 357 mm Center high 250 mm Center distance 1000 mm Width of bed 340 mm Max weigth of wpc. 300 kgs Spindle speed 22 – 2000 rpm Spindle hole D53 mm Spindle power 5,5 kW Weight ca.1950 kgs Dimensions LxWxH = 2550 x 1100 x 1500 mm Accessories and features - 3 axis D.R.O. - Chuck protection - 3 jaws chuck D250 mm - 4 jaws chuck D300 mm - Tool holder protection - Stopper for long. slide - Steady rest - Travelling rest - Center - Reduction adapter for main spindle Gusdswwt I Nepfx An Eoi - Tailstock - Coolant unit - 4-fold toolholder - Machine lamp - Rapid speed on long, and cross slides - CE marking - Manuals

Year of construction: 1996, condition: ready for operation (used), travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: HEIDENHAIN, controller model: TNC407, overall weight: 13,400 kg, spindle motor power: 18,500 W, spindle speed (max.): 1,300 rpm, table length: 1,100 mm, table load: 3,000 kg, table width: 1,000 mm, number of axes: 4, This 4-axis TOS WH 10 CNC boring machine was manufactured in 1996 and retrofitted in 2018. It features a longitudinal travel of 1250 mm, transverse feed of 1000 mm, and vertical travel of 1100 mm. The machine has a robust table size of 1000 x 1100 mm and a maximum table load capacity of 3000 kg. If you are looking to get high-quality boring capabilities, consider the TOS WH 10 CNC machine we have for sale. Contact us for further details. • Spindle diameter: 100 mm • Table size: 1000 x 1100 mm • Machine was overhauled in 2018 and the spindle run only 220 hours after scope of overhaul:- parts intended for grinding: machine bed, foundation slide, transverse slide, column, pallet,- inspection of gears, shafts, replacement of faulty and worn parts,- replacement of all bearings,- New Spindle- replacement of tubular shaft bushings,- Replacement of the bearing of the bearing ball screw- Belt replacement.- repair of the rope line that holds the counterweights,- replacement of the strap,- checking the hydraulic system,- Eliminate oil leaks- checking the oil system, cleaning, replacing faulty elements,- Grooving and processing of sliding surfaces with Diamant Moglice glue (base slide, spindle housingcross table), processing of oil grooves.- New production of conical lamellas,- interior painting,- repairs of covers, Henning protectors,- replacement of wire wipers,- repair of the cooling water system,- replacement of levers, buttons, scales, inscriptions,- grinding and adjusting the slats of mechanical fasteners,- the entire paintwork of the machine is RAL 601 Technical Specification Taper Size ISO 50 Through-spindle Coolant No Gjdpfxj Adtm Hj An Eeui

Condition: reconditioned (used), TOS FN 20 tool milling machine, geometrically overhauled in 2026. Universal tool milling machine, TOS Type/Model: TOS FN20 Condition: Used Geometrically overhauled in 2026, geometric protocol available Year of manufacture: approx. 1990s The machine was completely disassembled, thoroughly cleaned, geometrically overhauled, and repainted. Subsequently, it was professionally reassembled, and a comprehensive functional test was performed. The machine geometry was checked and adjusted. A test protocol according to DIN 8615 is available. As part of the work, the gib strips were also adjusted, and the coolant pump was overhauled. Technical data: Travel ranges (X/Y/Z): 300 mm / 200 mm / 350 mm Clamping surface (rotary table): approx. 240 x 600 mm Spindle mount: SK 40 (ISO 40) Speed range: 50 - 2,000 1/min (18 steps) Feeds: 8 - 400 mm/min (18 steps) Rapid traverse: approx. 1340 mm/min Power of main motor: approx. 3.5 kW Machine weight: approx. 1,000 kg Equipment including: - new 3-axis digital display - new bellow Gjdpjz Sqq Hofx An Eoui Inquiry item: Transportation costs will be provided in a separate quote.

Condition: used, machine/vehicle number: 0257391, height of centers: 160 mm distance between centers: 1500 mm grinding wheel measures: 500 x 127 x 40 mm grinding wheel rotations: 1570/2050 Upm electrical connection: 380 V kW Godpogayiwofx An Ejui space needed: 4400/6400 x 2000 x 1400 mm weight: ca. 4000 kg

Condition: used, Year of construction: 1998, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 15 m/min, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, torque: 1,200 Nm, controller manufacturer: SIEMENS SINUMERIK 840D, workpiece weight (max.): 18,000 kg, total height: 4,950 mm, total length: 10,270 mm, total width: 5,640 mm, table width: 1,000 mm, table height: 800 mm, table length: 6,000 mm, table load: 18,000 kg, rotational speed (min.): 16 rpm, rotational speed (max.): 3,200 rpm, overall weight: 21,000 kg, spindle speed (max.): 3,200 rpm, spindle motor power: 22,000 W, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, FFQ 100W-A6(A8) CNC – TOS KUŘIM Machining Center, Table Length 6m (8m) Control System: Siemens 840 C Availability: According to selected refurbishment Warranty: According to selected refurbishment Can be supplied as used, after medium repair, or after general overhaul, including modernization. FFQ 100W-A6(A8) CNC – Technical Specifications: Basic Machine Data: Manufacturer: TOS Kuřim Gjdpfxjxp Iz Ss An Esui Overall Length: 10,270 mm Overall Width: 5,640 mm Overall Height: 4,950 mm Total Weight: 21,000 kg Total Connected Load: 40 kVA Working Range: Longitudinal Travel X-axis: 4,000 mm (6,000 mm) Cross Travel Z-axis: 1,000 mm Vertical Travel Y-axis: 1,400 mm Horizontal Spindle Head with Extendable Quill: Tool Taper per ČSN 22 0433 ISO 50 Max. Power: 22 kW Speed Range: 16 – 3,200 rpm Number of Speed Steps: Infinitely variable Max. Torque: 1,200 Nm Quill Diameter: 170 mm Quill Extension: 400 mm Quill Working Feed Range: 1 - 2,000 mm/min Quill Rapid Traverse: 4,000 mm/min Max. Quill Feed Force: 10,000 N Spindle Head (IPS head): Tool Taper per ČSN 22 0433 ISO 50 Max. Power: 22 kW Speed Range: 16 – 3,200 rpm Number of Speed Steps: Infinitely variable Max. Torque: 1,200 Nm Machining H-V, spindle automatically adjustable to vertical or horizontal position Feed Range X – Y / Z: Number of Steps / Range: Infinitely variable / 1 – 5,000 mm/min Rapid Traverse Y – Z / X: 10,000 / 15,000 mm/min Table: Table Area: 1,000 x 6,000 mm (8,000 mm) Max. Load: 3,000 kg/m2 Tool Magazine: Number of Positions: 40 pcs Control System: SIEMENS 840 C Details upon request.

Year of construction: 2007, condition: ready for operation (used), travel distance X-axis: 1,130 mm, travel distance Y-axis: 1,370 mm, controller manufacturer: HEIDENHAIN, controller model: 530, overall weight: 11,000 kg, spindle motor power: 15,000 W, spindle speed (max.): 1,120 rpm, number of axes: 4, This 4-axis TOS WHN 9 B CNC boring machine was manufactured in 2007. It features a cross travel of 1370 mm and a longitudinal travel of 1130 mm, with a table clamping surface of 1120 x 990 mm. The machine is equipped with a spindle diameter of 90 mm and a spindle speed range of 9–1120 rpm. If you are looking to get high-quality boring capabilities, consider the TOS WHN 9 B CNC machine we have for sale. Contact us for further details. • Spindle diameter: 90 mm • Table clamping surface: 1120 x 990 mm • Overhauled: 2018 • Spindle hours: 13,400 h Gujdpfx Ane Aayz Ao Esi Technical Specification Taper Size ISO 50

Condition: used, Year of construction: 2009, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,400 mm, controller manufacturer: HEIDENHAIN iTNC 530, workpiece length (max.): 4,000 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 1,400 mm, workpiece diameter (max.): 2,500 mm, workpiece weight (max.): 10,000 kg, Equipment: chip conveyor, Used 6 axis machine equipped with build in rotary table 2500 x 3000 mm and 2 axis universal head Gueds Ai D Avepfx An Eoi

Condition: new, Year of construction: 2026, functionality: fully functional, Swing dia over bed 500 mm Swing dia over cross slide 270 mm Swing dia in bridge 700 mm Length of bridge 357 mm Center high 250 mm Center distance 1500 mm Godpfx Aneyt Iaqo Eoui Width of bed 340 mm Max weigth of wpc. 300 kgs Spindle speed 22 – 2000 rpm Spindle hole D53 mm Spindle power 5,5 kW Weight ca.1950 kgs Dimensions LxWxH = 3200 x 1100 x 1500 mm Accessories and features - 3 axis D.R.O. - Chuck protection - 3 jaws chuck D250 mm - 4 jaws chuck D300 mm - Tool holder protection - Stopper for long. slide - Steady rest - Travelling rest - Center - Reduction adapter for main spindle - Tailstock - Coolant unit - 4-fold toolholder - Machine lamp - Rapid speed on long, and cross slides - CE marking - Manuals

Condition: refurbished (used), Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 009/2026, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, table load: 3,500 kg, spindle diameter: 100 mm, spindle speed (min.): 10 rpm, spindle speed (max.): 1,000 rpm, total height: 3,110 mm, total length: 4,500 mm, total width: 3,200 mm, table length: 1,100 mm, table width: 1,000 mm, feed length X-axis: 1,250 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 1,000 mm, table height: 100 mm, feed length W-axis: 600 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, rotational speed (min.): 10 rpm, rotational speed (max.): 1,000 rpm, type of input current: three-phase, workpiece weight (max.): 3,500 kg, drill spindle length: 1,600 mm, spindle stroke: 1,100 mm, control cabinet width: 620 mm, control cabinet length: 1,800 mm, control cabinet height: 2,300 mm, overall weight: 14,000 kg, year of last overhaul: 2026, Equipment: rotational speed infinitely variable, The machine underwent a complete overhaul in 2026 and is equipped with a Heidenhain iTNC530 control system, Siemens feed drive motors, a Controltechniques spindle motor controller, and Siemens motors. Guodpfe Ain T Rjx An Eei

Condition: used, Univ. Universal milling machine TOS, type FN 32 Year of manufacture: approx. 1980 Travel distances: X: 450 mm, Y: 240 mm, Z: 380 mm Table size: 700 x 300 mm Spindle mount: SK 40 - M16 Spindle speed: 63-2000 rpm, 18 steps Feed rate: 8-400 mm/min, 18 steps Rapid traverse rate: approx. 1400 mm/min Tailstock travel: 90 mm Main spindle motor power: 2.2 kW Connection power: 400 Volt, 50 Hz - 2-axis digital display Heidenhain, type 731B for the X and Y axes - Vertical milling head with boring quill, swiveling +/- 90° and horizontally extendable - Spindle speed via 18 gear stages - Coolant system in the machine base - Electrical control cabinet on the side of the machine - Fixed angle table - Support for horizontal milling - Keyway broaching attachment, 16 to 105 strokes, stroke up to 70 mm, swiveling +/- 90° Gujdpjz Ebu Uofx An Eoi - 1 piece tool holder SK 40 with slitting cutter - Control cabinet located beside the machine Space requirement L x W x H: 1500 x 1200 x 1970 mm Weight: 1650 kg Good condition

Condition: refurbished (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, feed rate X-axis: 2 m/min, feed rate Y-axis: 2 m/min, feed rate Z-axis: 2 m/min, position of the milling head: VERTIKÁLNÍ, spindle speed (max.): 2,500 rpm, spindle speed (min.): 2,500 rpm, table width: 630 mm, table load: 2,000 kg, table length: 2,200 mm, table height: 800 mm, total height: 3,670 mm, total width: 3,250 mm, total length: 5,000 mm, type of input current: three-phase, rotational speed (max.): 2,500 rpm, workpiece weight (max.): 2,000 kg, overall weight: 14,500 kg, year of last overhaul: 2025, torque: 900 Nm, spindle motor power: 23,500 W, power: 23.5 kW (31.95 HP), Equipment: rotational speed infinitely variable, FCQV 63 CNC - TOS KUŘIM Bed Type Milling Machine System: TNC 415F Warranty: 6 months Availability: immediately available FCQV 63 CNC Technical specifications: Manufacturer: TOS Kuřim Overall length: 5,000 mm Overall width: 3,250 mm Overall height: 3,670 mm Total weight: 14,500 kg Number of tool magazine positions: 24 Total power consumption: 45 kVA Working range: Longitudinal travel X-axis: 1,500 mm Cross travel Y-axis: 630 mm Vertical travel Z-axis: 630 mm Spindle: Spindle taper: ISO 50 Gujdpjxp Dz Usfx An Esi Number of speeds / speed range: stepless / 11 – 2,500 rpm Spindle motor power: 23.5 kW Max. spindle torque: 900 Nm Feed rate range X – Y / Z: Number of speeds / range: stepless / 1 – 2,000 mm/min Rapid traverse: 10,000 – 10,000 / 10,000 mm/min Table: Table size (width x length): 630 x 2,200 mm Max. table load (axially): 2,000 kg Control system: Heidenhain TNC 415F Further details upon request.

Condition: good (used), Year of construction: 1990, HEIDENHAIN TNC-355 Working travels 850x500x450mm Table size 1250x500mm Spindle taper 50 Spindle speeds 35,5-1800 rpm Misc.accessories MARCELS MASCHINEN CH Gsdpfxjfg Ep Dj An Esui

Condition: used, Year of construction: 1987, Technical details: table diameter: 500 mm table height: 70 mm Gjdpfxsu Nkm Ee An Eeui rotatability of the table - manual/mechanic: ja ° weight of the machine approx.: 300 kg space requirements of the machine approx.: 0,92x0,650x0,19 m T-slots are 3 pcs longtitudinal and 1x transverse in the middle existing a=18mm h=30mm b=30mm c=13mm *

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, TRACKED SINGLE-SHAFT MULTIBLADE SAWMILL TOS SVITAVY PWR 401 450/160, 75 kW MOTOR Note: Fitted with new guides and a new chain (the replacement cost was quite significant – 36,000 PLN) TECHNICAL DATA - Track width: 450 mm - Shaft width: 420 mm - Mounted blade: 400 mm - Maximum blade diameter: 450 mm - Blade bore diameter: 80 mm - Maximum cutting height with 450 mm blade: 160 mm - Table dimensions: 2230 x 860 mm Top side: - Anti-kickback pawls - Slipper shaft - Anti-kickback pawls - Smooth slip roller - Hold-down - Shaft with bushing and nut - Hold-down - 2 slip/hold-down shafts Bottom side: - Roller before the table - Guide rail - Pawls - Track chain - Central track chain lubrication - Electric rise and fall for sawshaft - Electric body lift: 0.75 kW - Infinitely variable feed speed – new 2.2 kW inverter installed - Extraction port diameter: 280 mm - Main motor: 75 kW - Overall dimensions (L/W/H): 2360 x 2000 x 1960 mm - Weight: 3250 kg ADVANTAGES - Czech manufacture Gusdey Nxdyepfx An Eei - Used multiblade saw - Overhead operator’s control panel - Full technical documentation (DTR) - Very good condition - We can provide a warranty for the equipment

Condition: new, Year of construction: 2026, functionality: fully functional, New, ready for delivery: BUB 50/3000 CNC Control system: Siemens One Digital axis drives Includes extensive application software Includes electronic handwheel for axes X/Z Center height: 400 mm Distance between centers: 3000 mm Weight between centers: 500 kg Longitudinal travel of Z-axis: 3250 mm Positioning accuracy X-axis: 0.001 mm Headstock spindle mounting: MK 5 Tailstock mounting: MK 5 Drive power: - Grinding spindle: 11 kW - Workpiece spindle: 2.5 kW - Total installed: 22 kW Machine design with complete enclosure Preparation for dust extraction system included Separate screen, touch probe control, automatic balancing, and gap/crash control included. 1 grinding wheel: 508 x 80 x 203.2 mm Available immediately. Gjdpfx Anev N D Hbj Eoui Optional filter system in various designs.

Condition: good (used), Year of construction: 1984, Used TOS KAMENICEK model BUC63A x 3000 Universal cylindrical grinding machine. YEAR OF MANUFACTURE: 1984. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION Max Swing 630 mm Distance between centres 3000 mm Workhead swivel – towards wheelhead only 90 deg. mm Work spindle bored taper No. 6 M.T. Length of stroke of tailstock barrel 70 mm Tailstock barrel taper No. 6 M.T. Spindle nose clamping Din 55021 Swivelling of wheelhead + 30 deg – 10 deg Length of adjustment by re-circulating ball screw 290 mm Additional length of adjustment 250 mm Length of rapid feed 90 mm Length of infeed setting per each rev. of handwheel, measured on work diameter 0.5 mm Grinding wheel dia. X width X bore 750 x 80 x 305 mm Min. dia. of worn grinding wheel 570 mm Max. face width of grinding wheel 125 mm Rate of table traverse – steplessly variable 0.5-0.6 m/min Table traverse per 1 rev of handwheel 8 mm Swivelling of table +/- 5 deg. Max. permissible weight of work between centres 2500 kg Max. permissible weight of workpiece in chuck with overhang. (including weight of chuck) 150 kg Wheel spindle speeds (2) 840,970 rpm Gusdpfxjh U Rzno An Eji Grinding wheel surface speed 33 m/sec Work spindle speeds – int. var. in 2 ranges 8-50, 50-315 rpm Drive – total power required rated 31 kva Output of workhead motor 3 kw Output of wheelhead motor Electrics 15 kw 415V ,3Ph,50Hz Equipped with:- Additional wheel flanges, coolant system with clarifier and splash guards. FEATURES AND EQUIPMENT – Swivel Round Internal Grinding Attachment

Condition: used, TOS W100A - Horizontal Boring and Milling Machine The W100A is one of the most successful models from TOS Varnsdorf and represents the latest version of the classic series (H100, H100A, W100, W100A). It is robustly built, technologically versatile, and easy to operate and maintain. Ideal for single and small batch production with high reliability and comparatively low costs. - Classic design with a fixed column - Extendable spindle - Cross-traveling, rotatable work table - Integrated faceplate support in the spindle head - Option to use long drill rods with support from the drill support - Hardened and ground guide rails - Central lubrication - Position indicator The machine is suitable for drilling, milling, facing, and threading, as well as general machining operations on large workpieces. Technical data Spindle head: - Spindle diameter: 100 mm - Spindle connection: ISO 50 - Spindle travel (Z): 900 mm - Spindle center height above the table (Y): 0 - 1120 mm - Distance between faceplate and support bearing: 2800 mm - Faceplate diameter: 600 mm - Centering hole diameter in the table plate: 280 H6 mm - Centering hole depth: 8 mm - Max. facing diameter: 900 mm T-slots: - Faceplate, number/size/pitch: 2 / 20 H12 / 335 mm - Slide, number/size/pitch: 2 / 16 H12 / 150 mm Table: - Table cross travel (X): 1600 mm - Table longitudinal travel (W): 1250 mm - Clamping area: 1250 × 1250 mm - T-slots, number/size/pitch: 9 / 22 mm / 160/80 mm - Centering hole diameter in the table: 180 H6 mm - Centering hole depth in the table: 6 mm - Max. workpiece weight: 3000 kg - Tailstock slide travel: 1000 mm Speed: - Number of spindle speed steps: 23 - Spindle speed range: 7.1 – 1120 rpm - Number of faceplate speed steps: 16 - Faceplate speed range: 7.1 - 224 rpm - Max. torque of the spindle at speed: 3350 / 7.1 - 78.5 / 1120 Nm/rpm Feeds: - Drilling feeds, number/range: 32 / 0.02 - 12 mm/rev - Drilling feeds, number/range: 18 / 18 - 900 mm/min - Drilling feeds, number/range: 32 / 0.02 - 12 mm/rev - Drilling feeds, number/range: 18 / 25 - 1400 mm/min Rapid traverses: - Spindle, spindle head, table & tool slide: 2800 mm/min - Table rotation: 1 rpm - Tailstock bearing: 696 mm/min Threads: - Metric threads, number/range: 18 / 0.25 – 12 mm - Inch threads, number/range: 18 / 120 - 2.5 threads/1" Electrical data: - Main motor power: 11 kW - Total power consumption: 15 kW Gsdj Ahg Dtepfx An Eoui - Operating voltage: 3x 400 V / 50 Hz Dimensions & weights: - Machine dimensions WxHxD: approx. 6020 × 3000 x 3500 mm - Machine weight: approx. 14000 kg

Condition: good (used), Year of construction: 2000, Cast Clamping Angle Plates Manufacturer: Tos - STOLLE Year: approx. 2000 Guedpjy Ix Ngjfx An Esi 1x Clamping surface width: 1200 mm, height: 3000 mm, depth: 1200 mm, 12 slots: 20 mm Grid spacing: 250 mm, wall thickness: 75 mm, approx. weight: 3000 kg, price: €7,250 negotiable 1x Clamping surface width: 1300 mm, height: 2000 mm, depth: 1500 mm, wall thickness: 80 mm Approx. weight: 3000 kg, price: €5,250 negotiable 1x Clamping surface width: 680 mm, height: 800 mm, depth: 375 mm Grid spacing: 70 mm, slots for M16, approx. weight: 500 kg, price: €2,350 negotiable 1x Clamping surface width: 340 mm, height: 1000 mm, depth: 400 mm Grid spacing: 100 mm, slots for M16 thread, approx. weight: 500 kg, price: €2,150 negotiable

Condition: used, Year of construction: 1987, Technical details: max. pitch circle diameter: 360/24 mm weight of the machine approx.: 46 kg centre height: 130 mm swivable: ja ° rotation movement: 360 Grad dimensions: 350 x 450 x 260 mm Guodpfxju Nlg Tj An Eoi Application: For auxiliary work e.g. scribing of graduations. -dividing attachment with chuck Ø 125 in 360° pitch circle -clamping takes place via grid with index -pitch circle 24 -chuck: Ø 125mm, with revolving scale; through hole Ø 17mm; without jaws -base plate: size 260 x 300mm, with 2 clamping grooves WxL: 15 x 21mm - chuck key - 2 pieces groove stone *

Condition: good (used), Planing working width, mm 510 Maximum height for double-sided planing, mm 200 Maximum height for four-sided planing, mm 150 Lower planing shaft with 4 knives, electric motor 5.5 kW Upper planing shaft with 4 knives, electric motor 7.5 kW Right spindle diameter 40 mm, electric motor 4 kW Left spindle diameter 40 mm, electric motor 4 kW Electric height/width adjustment Gjdpfx Anjxvfwko Ejui

Condition: good (used), Year of construction: 2006, machine/vehicle number: 062190001, functionality: fully functional, total height: 1,860 mm, total length: 1,700 mm, total width: 900 mm, Berg & Schmid Metal Bandsaw GBS 250 Super AutoCut 35+70 m/min High-quality metal bandsaw with 2 blade speeds, double miter 60° left / 45° right, coolant system, and 3-stage AutoCut system – for cutting solid material and profiles. Cutting capacity - Round (90°/45°/60°): Ø 255 / 210 / 135 mm Cutting capacity - Square (90°/45°/60°): 300x180 / 200x160 / 130x100 mm Cutting angle: 60° Left / 45° Right Blade speed: 35 + 70 m/min | 2 stages Saw band size: 2,765 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW | 400 V - 50 Hz Working height: 950 mm Dimensions (LxWxH): 1700 x 900 x 1860 mm Weight (Net): approx. 329 kg Including base, coolant system, quick-release vise, cut monitoring, feed rate control, and Super AutoCut system. Berg & Schmid Metal Bandsaw GBS 250 Super AutoCut with double miter and 2 blade speeds - INDUSTRY-LINE High-quality metal bandsaw with AutoCut sawing system for sawing cuts in the best quality. For cutting solid material and profiles made of steel, stainless steel, and aluminum. Miter cuts up to 60 degrees left and 45 degrees right. Saw band speed adjustable in 2 stages. Closed saw frame, very quiet and low-vibration cutting. High-quality worm gear running in an oil bath. Hydraulic brake cylinder. Patented, ball-bearing turntable for easy miter adjustment - 60 degrees left and 45 degrees right. Solid, movable quick-release vise. Solid, large material support. Adjustable ball bearing. Cut monitoring via ammeter. Feed rate control. Support roller (infeed side). Electric coolant system. Machine base in sheet steel construction with front door and tool compartment. Industry-Line Program High-performance sawing machines that are also designed for multi-shift operation. Even with the highest cutting performance, minimal wear = reduced cutting costs. Super AutoCut - 3-stage system Automatic lowering of the saw frame via the hydraulic cylinder, steplessly adjustable feed, with limit switch at the end of the cut. Quick lowering of the saw frame to the workpiece, then switching to normal sawing feed (e.g. for marking). Hydraulic cylinder acts as a brake cylinder: a) Manual operation (e.g. for unclamping) or b) Lowering in the rest position. In addition, complies with occupational safety regulations. During the return stroke, the saw frame can be automatically positioned at any height. In the event of a blade break, the saw frame remains in its position. Gjdpfxo Aki Ime An Eoui Cutting capacity: 90° | Round - Ø 255 mm 90° | Square - 240 x 240 mm 90° | Rectangle - 300 x 180 mm 45° - Left | Round - Ø 210 mm 45° - Left | Square - 190 x 190 mm 45° - Left | Rectangle - 200 x 160 mm 60° - Left | Round - Ø 135 mm 60° - Left | Square - 110 x 110 mm 60° - Left | Rectangle - 130 x 100 mm 45° - Right | Round - Ø 180 mm 45° - Right | Square - 160 x 160 mm 45° - Right | Rectangle - 180 x 100 mm Accessories - roller conveyors.