Used Transfer Table for sale (19,149)

Condition: new, table diameter 340 mm table load 160 horizontal kg. Iasdjxabm Njpfx Abren table load 100 vertikal kg. swivelling range 0 - 90.0 Grad turning speeds 0.6 - 6.0 U/min bore 60.0 mm motor 230 Volt weight of the machine ca. 56.0 kg range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating instructions in German Functions COM 1800 control: - Right/left rotation - Infinitely variable speed control - Welding torch on/off - Overlap welding adjustable - Controller for rotation time (2-stroke / 4-stroke) - Speed display

Condition: new, table diameter 500 mm Iaedpfx Ajxabl Sobron table load 300 horizontal kg. table load 150 vertikal kg. swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.5 U/min bore 90.0 mm table height ~ 650 mm mm motor 230 Volt weight of the machine ca. 90.0 kg. range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be tilted and clamped at an angle of 0 ° to 90 ° - manual tilting - Start / stop via location-independent foot switch - Direction of rotation can be selected right / left - Adjustable rotation time - The control of the welding machine via control - 350 amp ground connection Scope of delivery: - control (integrated) - foot switch

Condition: new, total power requirement 230 Volt table diameter 300 mm table load 100 Horizontal kg swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.0 U/min turning speeds 1.2 - 12.0 U/min bore 20.0 mm weight of the machine ca. 50.0 kg dimensions of the machine ca. 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The device's control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: - control (integrated) Iedpfx Aoxaatnebrjan - foot switch

Condition: new, table diameter 340 mm table load 290 horizontal kg table load capacity 190 vertikal kg turning speeds 0.6 - 6.0 U/min spindle bore 60.0 mm swivelling range 0 - 90.0 Grad weight of the machine ca. 62.0 kg dimensions of the machine ca. 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - Operating instructions in German Ijdpfx Aboxaafqsrsan Functions of the COM 1000 control: - Right / left rotation - stepless speed control - welding torch on / off - Control for turning time

Condition: ready for operation (used), controller manufacturer: Heidenhain TNC 530, empty load weight: 45,000 kg, total length: 11,055 mm, total width: 6,320 mm, total height: 4,140 mm, Type: DMC-4100LH 2800 mm tussen de kolommen!! Zonder freeskop kunt u klassieke verticale bewerkingen uitvoeren. Met de multihoekfrees (MA-25) kunt u veel verschillende vlakken bewerken. MA-25 2-assige freeskop - 30 kW - 2000 tpm - 1500 Nm koppel C-as bereik: 0-360° - 2,5° Bereik van de A-as: +/- 110° - 2,5° Koeling via spindel: 40 bar Totaal vermogen: 67 kW Geen foundation nodig! De Johnford DMC-serie brugfreesmachine met dubbele kolom en beweegbare tafel is vervaardigd uit een brug/kolomconstructie van gegoten Meehanite-ijzer, die naar verluidt 30 procent minder vloeroppervlak in beslag neemt dan vergelijkbare verticale bewerkingscentra met C-frame. De brugfreesmachines zijn verkrijgbaar in uitvoeringen met beweegbare tafel en met schuifkolom (vaste tafel), met afmetingen variërend van 91 x 91 x 76 cm tot 18 x 6 meter. De lange basisconstructie biedt volledige ondersteuning aan de tafel over de gehele Y-asbeweging van 130 cm, waardoor zeer zware werkstukken bewerkt kunnen worden. De Y- en Z-assen dragen te allen tijde een vaste belasting, terwijl de X-as de enige dynamische belasting draagt. Dit maakt nauwkeurige bewerkingen en strakke toleranties mogelijk tijdens bewerkingen met hoge snelheid. Doordat er geen tafeloverhang is, worden de helling en de draaiing van de X-as geëlimineerd. De afstand tussen de hartlijn van de spindel en de kolom is geminimaliseerd, wat de stijfheid verder verhoogt. De zwaar geribbelde gietijzeren constructie van de machine zorgt voor een lange levensduur van het gereedschap en een goede oppervlakteafwerking van het werkstuk. De combinatie van twee schroefbandtransporteurs en een rupsbandtransporteur garandeert een volledige spaanafvoer met minimale handmatige reiniging. Bovendien wordt eindige-elementenanalyse (FEA) gebruikt voor het ontwerp van elke brugfreesmachine, waarbij de effecten van realistische omstandigheden, zoals trillingen, warmte, vloeistofstroming en andere fysieke invloeden, worden gesimuleerd. Longitudinal travel X-axe: 4100 mm Cross travel Y-axe: 2800 mm Travel Z-axe: 800 mm Dimensions clamping space- table: 4200 x 2400 mm Iajdpfx Aexp Sk Dobrsn Power on spindle: 30 kW Admission in millinghead (ISO): BT 50 Max speedrange: 6000 rpm

Condition: new, FACTORY NEW ROTARY TABLES // ROTARY-SLIDE TABLES Iaedpem Tv Azsfx Abrjn Positioning, simultaneous turning, and interpolation Rotary table sizes: 1,000 x 1,000 // 1,200 x 1,200 // 1,500 x 1,500 // 1,800 x 1,800 // 2,000 x 2,000 // 2,500 x 2,500 // 3,000 x 3,000 // 3,500 x 3,500 // 4,000 x 4,000 mm --- The clamping surface can also be round instead of square - Maximum workpiece weight: 6,000 to 80,000 kg Optional sliding axis: 1,000 to 3,000 mm (in 500 mm increments) Positioning accuracy: ±5 arc seconds Only inquiries from Germany will be answered // Nur Anfragen aus Deutschland werden bearbeitet

Condition: new, BRAND NEW NC ROTARY TABLES Iajdpfx Ajm Tvz Dobron Working position: vertical - horizontal Applications: positioning - stepless rotation // interpolation Rotary table faceplate diameter: 500 / 600 / 800 / 1,000 / 1,200 mm – The clamping surface can also be square Max. workpiece weight (horizontal): up to 20,000 kg Max. workpiece weight (vertical): up to 4,000 kg Positioning accuracy: ± 3 arc seconds Integration into machines with HEIDENHAIN or SIEMENS controls. Only inquiries from Germany will be answered.

Condition: excellent (used), Grinding diameter: 400 mm Round magnetic chuck: Ø 400 mm Grinding wheel: 200 x 80 x 78 mm 2 speeds: 20/40 rpm Grinding wheel speed: max. 2850 rpm Max. distance between table and grinding wheel: 280 mm Throat: 315 mm Fine adjustment: 0.01 mm Motor power: 3 kW Dimensions (L x W x H): approx. 700 x 900 x 1800 mm Iodpfx Asykkhlebrjan Weight: approx. 550 kg The machine comes from a training workshop and is in very well-maintained condition. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 2013, This Demmeler welding table is being auctioned online as part of our RESTLOS construction machinery auction "Plant Closure (Relocation) Part 2 - Elevator Works for Brandner Revalue GmbH - Heavy-duty shelving - Transport trolleys - Machines and equipment - Cranes - Workshop cabinets - Assembly tables - Welding curtains - Office furniture and much more," taking place in 73765 Neuhausen auf den Fildern. Iasdpfx Abjykqqyorjn You will find this and many other items, including welding technology, workshop and production equipment from well-known brands such as Eurokraft, Fetra, Kaiser + Kraft, Krause, Bito, Garant, Denios, Würth, Beewatec, Gaerner, SSI Schäfer, Wini, König und Neurath, Steelcase, Soehnle, and Quipo, on our RESTLOS auction platform.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, Stainless steel table cart Glazing table with 10 tray shelves 780 x 580 or 600 x 400 trays Mobile with 2 brake castors Used device, cleaned Iedpewpzrmofx Abroan We have many more stainless steel furniture in stock!

Condition: good (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 2026, total height: 970 mm, total width: 3,400 mm, Work tables AT 3400, mobile Stainless steel worktop with rear gallery Drawer unit on the right 2 stainless steel flour trolleys 8 ingredient containers on the left with stainless steel lid Iasdpfx Abswyrw Isron Used device, cleaned Dimensions: 3400 x 800 x 970 mm (W x D x H) Option: Delivery service Many more tables in stock!

Condition: excellent (used), Year of construction: 2015, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,500 mm, table load: 12,000 kg, total height: 3,800 mm, total length: 8,800 mm, total width: 5,900 mm, table length: 1,800 mm, table width: 1,600 mm, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, overall weight: 42,000 kg, Table type boring mill Fermat - WFT 13 CNC MACH-ID 9430 Make: Fermat Type: WFT 13 CNC Control: HeidenHain iTNC530 Year: 2015 Iodpoyim I Rjfx Abrsan X - Travel: 3000mm Y - Travel: 2000mm Z - Travel: 1500mm W - Travel: 700mm Table Length: 1800mm Table Width: 1600mm Table load: 12000 Speeds / ranges: 3000Rpm Power: 61kW Ram size: 300 x 300mm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 1-20000mm/min. Feed rate Y-Axis: 1-20000mm/min. Feed rate Z-Axis: 1-20000mm/min. Feed rate W-Axis: 1-20000mm/min. ATC Toolchanger: 30 Number of controlled axis:5 Length: 8800mm Width: 5900mm Height: 3800mm Weight: 42002kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2018, Load capacity 350 kg, table height min. 757 mm, table height max. 1157 mm, table length 3000 mm, table width 1000 mm, length approx. 3010 mm, width/depth approx. 1040 mm, height approx. 1157 mm, recommended extraction capacity 2200 m³/h, number of extraction ports 3 x 220 V, extraction port diameter 140 mm, weight: 130 kg. Storage location: Nattheim. Iodoxnlavepfx Abroan

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, total length: 800 mm, total width: 1,400 mm, total height: 850 mm, TOP Work Table AT 1400 with Stainless Steel Top Iaodpfx Aeykig Tsbron Work Table / Baker's Table Stainless steel work surface with rear upstand Bottom shelf Stainless steel construction with 2 doors Dimensions approx.: 1400 x 800 x 850 mm (W x D x H) Used unit, cleaned Option: Delivery service

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, total length: 800 mm, total width: 4,000 mm, total height: 900 mm, TOP workbench AT 4000 with beech worktop, mobile Stainless steel workbench AT 4000 Iodpfx Aoykifpsbrsan with beech wood worktop bottom with storage grate drawer unit on the left Dimensions: 4000 x 800 x 900 mm (W x D x H) Used unit, cleaned Top sanded and newly oiled We have more top-quality workbenches in stock!

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, type of input current: AC, input voltage: 230 V, ambient temperature (min.): 15 °C, electrical fuse: 10 A, input frequency: 50 Hz, ambient temperature (max.): 38 °C, total length: 680 mm, total width: 1,300 mm, type of cooling: air, Coldline Master GN 2 Refrigerated Table For quick and flexible use Model: TS13/1M-760 Stainless steel construction Cooling range: -2 to +8°C, adjustable Circulated air cooling Ready-to-plug-in unit, 2-door Connection: 230V Dimensions: 1300 x 680 x 860 mm (W x D x H) Used equipment Options: Grids / trays Pair of support rails Iedpjykibdjfx Abrean Maintenance contract Service package Delivery service Instruction & commissioning Many more refrigeration units available from us!

Condition: good (used), Year of construction: 2020, functionality: fully functional, 5.5 kW, Tiltable -45/+45°, electronic height and tilt adjustment Iedpfx Aeykar Hsbrsan Left/right, 6 speeds Aigner fence 2 x 500 mm, digital display on spindle moulder fence, table 2500 mm x 780 mm, mechanically programmable spindle fence with two displays, system for quick removal from the worktable New price €18,700 Available approx. September 2026 Transport possible at an additional cost!

Condition: excellent (used), functionality: fully functional, Rotary table gearbox with tailstock Rotary table:KITAGAWA TR630H2E04 Iajdpfowhmdlsx Abren Tailstock: KITAGAWA TS 630 RN

Year of construction: 2022, condition: excellent (used), functionality: fully functional, Bakery and confectionery work table. Stainless steel with granite worktop. Reinforced welded construction. Storage shelf on the left, open on the bottom right. Stainless steel design. Approx. dimensions: 3000 x 800 x 890 mm (W x D x H). Used device, cleaned. We have many more top-quality tables in stock! Iedpfx Abewv E Nisrean

Condition: excellent (used), functionality: fully functional, Stainless Steel Work Table AT 3500 with Beech Wood Worktop and Rear Gallery 2 x Stainless Steel Sliding Doors with Shelving Drawer Block on the Left Iasdpfxorhd Udj Abrsn Door with Shelf Dimensions: 3500 x 800/700 x 900 mm (WxDxH) Used device, cleaned Top sanded & freshly oiled Delivery service available Many more work tables in stock!

Condition: new, A self assembly heavy duty modular timber frame table suitable for framing and boarding of panels. The modular 2m or 3m x 1m tables can be assembled in various configurations, to suit either wall panels or floor cassettes. 4 off 2m / 3m x 1m Modular tables suitable for frames up to 4m / 6m x 2.8m PLY top with channel for fitting (optional) pop up rollers Complete with: 1 fixed infill for spacing the table to 2.8m capacity 1 sliding infill for supporting subcomponents inside the panel. Iasdon Up R Ijpfx Abrjn 9m of fixed fence (6m length x 3m width) Working Height 700 - 850mm

Condition: ready for operation (used), table length 800 mm table width 320 mm groove width 20 mm dimensions of the machine ca. 800 x 320 x 250 mm Fixed angle table for attachment to tool milling machine with water drainage. Machine dealer with own stock of 1600 m². Ijdpfx Abeumndbjrean

Condition: new, table diameter 800 mm table load 2 t swivelling range --> 95 Grad Iaedpfx Abek Rfwtsren max. torque 1250 Nm table rotation speed 2 U/min Working height from to 550 - 1300 vertikal mm Working height from to 650 - 1400 horiz. mm total power requirement 2,53 kW weight of the machine ca. 930 kg dimensions of the machine ca. 1,85 x 1,66 m Video available on our website. Electric 400 Volt Hand control panel Hydraulic-device Hydraulic positioner for permanent turning right + left, tilting, Raise and lower. Various sizes from 1250 - 18000 kg load capacity in the production program. Machine dealer with own stock of 1600 m².

Condition: new, weight max. in kg 2500 kg Working height minimal 350 mm Working height maximum 1850 mm max. torque 3000 Nm 0 1 U/min adjustment speed vertikal 560 mm/min vertical adjustment 1500 mm baseplate diameter 600 mm rotation movement 0,75 kW stroke drive 1,85 kW height of the plant 2505 mm weight 1160 kg Sideros Engineering Head & Tailstock Positioners are used to weld and assembly long and large weldments in many different application fields. Besides the benefits of ergonomics and safety during welding and assembly applications, the revolutionary feature of Syncrolift is the compactness and the portability of both columns, thanks to their dedicated hydraulic jacks. The result is an extreme flexibility in the factory. Syncrolift features two main axis: Electrical elevation/descent, and Electrical 360° left/right rotation. Due to its special design, the column positioner can process very large components. Higher columns (+500/+1000/+1500 mm) for processing components with larger dimensions are available. Special equipment: Double-sided lifting drive, guide rails in 2 m segments, wireless handheld control unit, TCS program control, etc. Thanks to the movable columns, the length of the different workpieces can vary between 1 m and over 20 m. Depending on the weight and dimensions of the component, positioners with load capacities of max. 2,500 kg to max. 40,000 kg are available. Advantages: Improved Safety Proper Ergonomics Improved weld quality Cost savings and profit increase Welding/Assembly procedures repeatability Machine Features: Master and idler column with rotating mounting plates Pallet jacks for column lifting and relocating Servo-motor, ball screw and encoder control for Up & Down motion Servo-motor, gear reducer and encoder control for Rotation LCD display for positioning set up, safety thresholds setting and diagnostic Automatic load leveling Redundant safeties - servo motor brake, ball screw thread geometry and mechanical Stopper Low maintenance 240/480/600 Volt - 3 phase - 60 Hz In order to configure the system precisely to meet the requirements, we must Ijdpfx Abjvw Du Uorjan obtain all relevant information about the workpieces to be processed for the manufacturer's technical office. There we have a list of questions for this purpose.

Year of construction: 2025, condition: new, functionality: fully functional, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks and without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. The standard equipment includes a laptop with Windows operating system and laser software. Optionally, the laser model LAS 22 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 Watt (Optional: 20 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with pinch protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled Iajdpfjwkpxksx Abrsn - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials