Used Trunion Table for sale (16,546)

Year of construction: 1991, condition: good (used), Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, table saw, circular saw, panel saw -Manufacturer: Altendorf, sliding table saw type TKR 45 -Main motor: Bauknecht 5.5 kW with brake -Scorer motor: Emod 0.75 kW -Speed: 3000/4000/5000 rpm -Saw blade: Ø 300 mm / max. Ø 350 mm -Max. Cutting height: 90° 95 mm / 45° 70 mm Cedpfx Afjmydmbonopu -Miter cut: up to 45° -Cutting width: 2250 mm -Table length: 1400 mm -Dimension total 3480/1530/H1370mm -Weight: 1104 kg

Condition: excellent (used), Altendorf F45 prodrive panel saw 300 cm sliding table, Blade tilt and height are motorized and adjustable, Right-side rip fence motorized adjustable up to 1340 mm, 2-axis scoring unit, electrically adjustable, 5.5 kW vario motor, speed controlled by frequency inverter, Max. blade diameter 450 mm, Cpodpfx Aox Npvtofnou Used machine in very good condition.

Condition: excellent (used), total length: 2,750 mm, overall weight: 161 kg, TECHNICAL SPECIFICATIONS - Material: Stainless steel 304 L - Motor power: 0.37 kW - Housing made of folded sheet metal forming band edges for natural sealing - Support on plastic bearing with anti-jamming sector drum, quick cleaning - Easy belt removal and quick belt release Codpfxsyhdaie Afnopu - Drive by flange-mounted gearmotor on left side, with hollow shaft and speed adjustment = 7 to 35 m/min - Tubular drum with rubber-coated guide profile - Smooth white welded belt with guiding profile - Belt scraper with waste collection chute - Electrical control with circuit breaker, equipped with emergency stop on each side (low voltage) DIMENSIONS - Centre-to-centre length: 2750 mm - Working height: 900 mm belt + 400 mm adjustment - Overall dimensions: 2935×1100 mm - Weight: 161 kg APPENDICES - 6-month warranty - CE compliant

Condition: new, functionality: fully functional, UNUSED / new / as new Vibrating Table Power: 400 VOLT Cpedevrl Ufepfx Afnou 2x asynchronous three-phase eccentric motors With manual / documentation! The device can be viewed at my warehouse by appointment. Shipping and loading are of course possible!

Condition: good (used), Year of construction: 2002, max. load capacity 10,000 kg Cjdpjyaarxofx Afnepu Dimensions (LxWxH): 2700 x 2000 x 2300 mm

Condition: used, Year of construction: 1988, control Heidenhain 355 tool adaptor SK50 weight of the machine ca. 8 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Cpjdpfef Tdvbex Afnju +++++

Condition: used, Year of construction: 1990, Expert Eda450 Size of table plate 450 mm weight of the machine ca. 380 kg +++++ Please note: Cpsdpfof Nlrqjx Afneu The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1970, table length 2200 mm table width 115 mm Cpedpsudc Twofx Afnju table load 600 t weight 3 t 2

Condition: used, Dreh- und kippbar für Schweißpistole oder für Plasma condition nicht geprüft +++++ Codpfx Aeidv Erofnspu Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Materials Testing Machine 20 kN Tensile & Compression Testing testXpert III For sale is a high-quality Zwick / Roell materials testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. Control is via PC using Zwick/Roell testXpert III software (data carrier & documentation included). Technical Data: Rated test force: 20 kN Test direction: tensile & compression Power supply: 230 V / 50–60 Hz / single-phase Power consumption: approx. 2.1 kVA Cpedpfx Asx Up Igefnou Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical data (according to documentation & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: tensile & compression Max. test frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight: Total height: approx. 1,545 – 2,114 mm (depending on crosshead position) Total width: approx. 856 mm Total depth: approx. 650 mm Working area width: 440 mm Weight: approx. 150 kg (base unit) approx. 180 kg with typical configuration Electrical Data Power supply: 230 V AC Phases: single-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Plug: Schuko (CEE 7) Measuring & Control Electronics: Internal data acquisition: 500 Hz Data transmission to PC: adjustable 10–100 Hz Interface: RS232 (COM) Electronics housing protection class: IP32 Important note: 'The table shown in the photos is not included in the sale.' Condition: used Scope of delivery: (see picture) - Zwick / Roell materials testing machine (20 kN) - Electronics unit - PC workstation (monitor, PC – please see photos for condition) - 2 measurement modules (Delock units) - Zwick/Roell testXpert III software (data carrier) - Original operating and technical documentation - Various connection and interface cables (Specifications are subject to change and errors excepted!) If you have any questions, we will be pleased to assist you by phone.

Condition: used, table diameter 5600 mm table load 150 t x-travel / mm total power requirement 88 kW weight of the machine ca. 55 t Csdpfx Afshmzkbenspu Round table dm 5600 mm / 150 to load Round table dia. 5600mm / 150 to load Equipment: Table with drive motor Status: closed since 1980 Machine Type:C.T.F Diameter core face plate: 3000 mm Diameter ring faceplate: 5600 mm Core and ring faceplate can be coupled: yes Faceplate divisible into segments: no Max. workpiece weight: 150000 kg Table weight approx.: 55000 kg Dimensions: Dm 5600 x H 1500 mm filming operation Speed: 0.1 - 20 rpm Rotation levels:4 Drive power: 88 KW milling operation Speed: 0.0002 - 0.2 rpm Peripheral speed (5000 mm): 3140 mm/min Drive power: 11 KW

Condition: used, Year of construction: 2007, table diameter 4520 mm table load 35000 kg swivelling range 110 Grad total power requirement 44 kW weight of the machine ca. / t required space / m Type: ROMAT 350 / LVEB-120000N-4m / VVEs-D-18000N-5m-S / QVEB-2m travelling beam / CR-200000N / Hydraulic scissor lift table In the scope of delivery: Item Designation 1 Welding power source GLC 603 Quinto SD 2 Wire drum 3 Service door 2.1 4 Robot control cabinet 5 Service door 1.2 6 Scissor lift table (shown in parking position) 7 Cross-travelling unit QVEB 8 ROMAT 350 robot 9 Service door 1.1 10 Safety fence 11 Platform 12 Positioner 13 Sliding door 1 14 Linear traversing unit LVEB 15 Vertical traversing unit VVEs 16 Sliding door 2 The disc ring on the table is a device that is not included in the scope of delivery ----- Technical data - Mechanical dimensions (without control unit and superstructures): approx.6440(57 7 0)x4520(2700)x5460(3320) LxWxH - Turntable diameter: 4520mm - Weight: approx. 25,000kg (without superstructure) - Speed range: 0.004 - 1.07 rpm - Welding current coupling: 600 A - Maximum table load capacity: 35 tons (according to load chart) Ambient temperature Storage / transport 0 to 60'C Operation +4 to 35 "C Interfaces Central transfer point for control, power supply, earth connection ----- 2.3 Linear traversing unit, LVEB Type LVEB-120000N 4m Dimensions W x D x H 7,700 x 2,440 x 776 mm Weight 4,355 kg Travelling distance 4,000 mm Load of the carriage 120,000 N Drive unit Gear motor Precision bevel gear motor Manufacturer Stöber Type K402VF0250EK703V Power 4.21 kW Voltage UKE 140 V / 1000 rpm Current Rated current IN: 8.32 A Type of current Standstill current I0: 9.04 A Motor speed 3,000 rpm Gear ratio i = 25.28 ----- 2.4 Vertical traversing unit, VVEs Type VVEs-5m Dimensions W x D x H 2,000 x 1,960 x 7,150 mm Weight 9,500 kg Travelling distance 5,000 mm Max. moving mass 18,000 N Drive unit Gear motor Bevel gear motor with brake Manufacturer Stöber Type K713VF0790MQ30ED704B Power 4.8 kW Motor speed 2,000 rpm Gear ratio i = 78.83 (20181/256) ----- 2.5 Cross-travelling unit, QVEB Type QVEB-2m Dimensions W x D x H 1,270 x 4,100 x 756 mm Weight 1,950 kg Travelling distance 2,000 mm Load on the travelling beam 10,000 N Max. moving mass 18,000 N Drive unit Gear motor Precision flat geared motor Manufacturer Stöber Type FS202VQ0145ED402U Power 1.43 kW Voltage UKE 140 V / 1000 rpm Rated current IN 2.86 A Type of current Standstill current I0: 3.1 A Motor speed 3,000 rpm Gear ratio i = 14.65 (3180/217) ----- 2.6 Rotary indexing table Type CR-200kN Manufacturer Cloos Dimensions W x D x H 1,820 x 2,120 x 541 mm Weight 2,850 kg Drive unit Gear motor Bevel gear motor Manufacturer Stöber Type K814VG1540EK803U Power 6.7 kW Motor speed 3,000 rpm Gear ratio i = 154.322 ----- 2.7 Robot ROMAT 350 Type ROMAT 350 Dimensions (W x D x H) in reference position 1,900 x 600 x 1,500 mm Weight 205 kg Footprint 500 x 515 mm Cpjdpformulvsx Afneu N...

Condition: used, Altendorf Wa80 panel saw, 320cm sliding table on round rods, Main motor 5.5KW, 3 rotation speeds, Scoring unit 0.75KW, 0-45° tilt, electrically adjustable, Saw blade up/down electrically adjustable, Max blade diameter 400mm, Cpsdpfeyhdb Hsx Afneu Max cutting width at right rip fence 130cm, Machine tested, fully functional.

Condition: used, Year of construction: 2001, functionality: fully functional, NC rotary table Fibro 10.36.8 with face gear, year 2001 well maintained, very good condition, little used Pitch 120 teeth +/- 1" With hydraulic locking via face gearing, table top does not lift off Rotary table height 380 mm with substructure height 245 mm (total height 625 mm) Table size Ø 1180 mm Top table plate Ø 1300 mm, Cjdpfjyg N Hrjx Afnepu Table load approx. 5000 kg Table surface smooth, with dirt grooves with Siemens servo drive 1FT6105-8WF71-4EG2 and bevel gearbox Table speed max. 20 rpm with bevel gearboxes itot = 72 Tangential torque with motor operation 7200 Nm Total weight 3.800 kg without fixators, without installation and commissioning

Condition: used, Year of construction: 1996, Carriage length: 2800 mm Anodised version (new carriage) Motor 7.5 kW Automatic contactor control Digital speed display Cutting width 1000 mm Table extension 800 mm Location: Nattheim Csdpfxoyapv Tj Afnspu

Condition: used, Year of construction: 2015, Stationary spindle moulder Table size: 1945 x 575 mm Max. spindle projection above table: 130 mm Usable spindle length: 100 mm Max. retractable tool diameter: 180 mm Spindle arbor diameter: 30 mm Spindle speeds: 3,500/7,000/10,000 rpm Motor power: 5 kW Weight: approx. 240 kg Extraction port diameter: 2x 120 mm Location: Nattheim Cedpfeyapvtex Afnspu

Condition: ready for operation (used), Year of construction: 2001, machine/vehicle number: AE/21582, Operating voltage: 400 V/50 Hz Rated current: 44 A Weight: 4800 kg Year of manufacture: 2001 Panel cutting saw from SCM manufacturer, made for industrial applications Robust design for high productivity and precision Cutting height/saw top allowance: 115 mm Max panel width: 3200 mm Panel max length: 3200 mm Number of grippers: currently 6 Cedpfet Dva Sex Afnjpu Loading: front

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, R0.11.75 class si 400ep Blade Off 57.00.42 Angle guide with 3 LCD screens for positioning the stops 57.04.43 Automatic adjustment with 2 axes for the scoring unit group Cpjdpfx Aeyfxalsfnou 57.04.21 Chassis for angular processing with CompeX device 57.03.53 Panel support table extension with roller conveyor on the parallel guide side

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, R0.21.66 minimax sc 4e CE version Cpjdeyfw U Ujpfx Afneu 58.04.75 Version with max. travel for cross cuts 3200 mm 58.02.60 Scoring unit with belt drive and supplied saw blade 28.01.43 Cutting width for parallel fence 1270 mm 58.02.62 Three-phase motor 5kW (6.6 HP) 50Hz

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Vertical infeed transport - Vertical 2600 mm washing machine with drying - Tilting table (behind the washing machine) - Horizontal outfeed transport - tilting table (discharge) Description of Line Components Pos. 1 Loading station, 250kg With the help of the suction frame, the sheets are taken off the glass rack and they are placed vertically on the tilting table in front of the washing machine. Differences in inclination can be compensated by tilting of the suction frame. The suction frame has a rotating function to collect short formats in upright position and to place them down on the long edge. Light crane Trolley crane with a lift system travelling on rails by hand, which are standing on steel supports. Lift Electrical lifting and lowering, horizontal turning and tilting of loads. Generation of vacuum via vacuum pump system with check and display of the vacuum power. A central operation desk with integrated control buttons allows easy signal activation of the single functions. In case of pressure loss in the dangerous area, it is displayed and acoustical signal is given. Pos. 2 Vertical Inlet Transport WM Codpswii Hfjfx Afnepu The vertical transport serves as inlet transport in front of the washing machine. In horizontal position, the glass sheets are placed on Vulkollan transport rollers. In vertical position transport rollers with Perbunan rings are driven via screw wheels. The transport rollers are arranged in drag bearings placed on a solid welded frame. Small glass sheets are placed manually on the transport frame. After placing the glass sheet, the transport is activated by push button. Pos. 3 Vertical Washing Machine with Drying The washing machine body, washing chambers, recirculation vats and the drying nozzles are made entirely of stainless steel. The rubber rings of the transport rollers are resistant to cutting oil. Flat jet spraying nozzles in the pre-rinsing section are fed with city water. Coarse dirt particles removed are directly led into the drain. This reduces contamination of the DI-water circuit for the washing machine. The washing machine is equipped with energy and water saving cascade system. Pre-rinsing section with Flat jet spraying nozzles Washing section with 3 pairs of brushes, 3 vats and 3 pumps Acid section with 1 pair of brushes, 1 vat and 1 pump Drying section with 2 pairs of drying nozzles provide dry edges. Pos. 4 Vertical Inspection Transport with glass Activation Section The transport serves as Activation Section for the glass surface and as Inspection and Storage Transport before the Tilting Table. Drive by a geared motor, A.C., frequency-controlled. All the rollers are arranged in drag bearings with a single drive operating pairs of spiral-toothed gear wheels. Pos. 5 Tilting Table with Horizontal Transport and Vertical Inspection Transport rollers, which are individually driven by worm gear wheels are placed on a solid welded frame. The transport rollers are arranged in drag bearings. Tilting arms are in horizontal position. The integrated tilting table is made of several profile arms which can be tilted (electro-mechanical by crank mechanism) from the horizontal position by 84°. The tilting speed has its lowest speed at the beginning and at the end of the movement. The glass is tilted from vertical to the horizontal position. If no glass happens to be in the Pre-Heating oven the glass runs into the oven.

Condition: used, Angle table with 5 T slots 12 mm T slot width Length 680 mm width 260 mm Height 265 mm Cedpfjcu Im Dex Afnepu

Condition: good (used), Year of construction: 1970, not tiltable, carriage length 2600 mm 1250 mm to the right of the blade 380 V, 5.5 HP Cpjdpfx Afox U A Erenju upper extraction

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, table load: 12,000 kg, spindle diameter: 130 mm, spindle speed (max.): 1,000 rpm, table length: 1,800 mm, table width: 1,600 mm, Heidenheim TNC 355 Csdoyf Uc Ajpfx Afnopu

Condition: used, Mechanical scissor lift table with roller device - welding positioner, vessel rotator Ideal base for 3D welding table Load capacity 800 kg (maximum load with fixed castors) Load capacity 2000 kg (maximum load without fixed castors) Platform size 1800 x 860 mm Usable lift max. 690 mm Table height - bottom position 770 mm (without top frame) Table height - top position 1460 mm (without top frame) Table height - bottom with locking bolt 830 mm (without top frame) Table height - top with locking bolt 1080 mm (without top frame) Top frame height 80 mm Load capacity of rotator approx. 400 kg Roller spacing / axle spacing 155 to 685 mm Axle distance to top frame 190 mm Roller diameter 100 mm Roller width 40 mm Cpsdpfxox U Eh Ne Afnsu - Scissor lift table is ideal as workbench, assembly fixture, welding table base, or with vessel rotator for pipe welding - Mobile on 4 polyamide rigid castors Ø 125 mm, 2 of which are swiveling with brakes - Height adjustment via trapezoidal screw spindle and hand crank - 4 locking bolts for height adjustment, hole spacing 50 mm - Removable table top with forklift pockets - Roller spacing of polyurethane rollers on rotator adjustable in perforated pattern - Very robust construction made of square profiles with 5 mm to 10 mm wall thickness Required space (L x W x H): 1800 x 860 x 1200 mm Weight without rotator 470 kg Weight with rotator 620 kg Very good condition

Condition: excellent (used), Without undercutter. Very good condition. Cpsdpfjygw Nnsx Afnou