Used Tubes for sale (1,866)

Condition: used, Conveyor belt, trough belt conveyor, trough conveyor, presumably GASUS type FB 400 x 5500 Belt conveyor, transport belt, belt conveyor Factory number: F Year of manufacture: 1996 Useful length: 5.5 meters Belt width: 400 mm Return roller diameter: 225 mm Return roller width: 450 mm Belt speed: approx. 30 meters/min Motor power: 1.5 kW Mains connection: 400 Volt, 50 Hz Hnodpohz U Azofx Ahyjg - Driven by tube motor - Infeed hopper 600 x 400 mm - The idler stations are two-part, troughed - Metal carrying rollers with maintenance-free ball bearings - Belt tension adjustable via threaded spindles - Smooth rubber conveyor belt - Sturdy tubular steel frame - Removable cover plate above the belt - For horizontal or slightly inclined transport of bulk materials Overall dimensions L x W x H: 6400 x 850 x 950 mm Weight: approx. 700 kg Good condition

Condition: good (used), Year of construction: 2005, control type: CNC control, - Max. bending angle: +/- 180 + 10° - Tube feed length: 4100 mm - Round steel tube up to 30 x 2.2 mm² Hnsdpex T Di Aefx Ahyog - Round stainless steel tube up to 30 x 1.5 mm - Square tubes: 20 x 2.5 mm - Bending time for 90 degrees: 1.5 sec (advance) - Longitudinal feed speed: 450 mm/sec - Maximum bending radius: 125 mm - Freestanding bending head, 850 mm long - Bending axis drive: electrohydraulic

Condition: new, Year of construction: 2024, color: blue, loading space volume: 1 m³, BlueTender/AdBlue tank Hjdex S Ngqepfx Ahyeng    • Tank capacity: 1,000 litres    • Filling opening    • Suction tube with cap    • Forklift sleeves and 4 lifting lugs    • 1 lid fitted with gas struts and chrome-plated hinges    • Stackable    • Fully lockable, prepared for padlock security    • Inner plastic tank in steel drip tray    • Pump as desired (12 or 24 volt) Condition: New Year of manufacture: 2024

Condition: good (used), Year of construction: 2008, - Max. turning diameter over bed: 700 mm - Turning length: 1,500 mm Main spindle: - Speed range: 2,800 rpm - Enlarged main spindle: Ø 150 mm, bore: 110 mm - Drive power: 30 kW, 900 Nm - Spindle nose: Size 11 Total power requirement: 59.5 kVA Approx. machine weight: 14.5 t Space requirement approx.: 6.4 x 3.0 x 2.6 m EQUIPMENT: - 3-jaw chuck, SMW KNCS-N 400 K11 - Tailstock - Programmable CNC steady rest slide (cross slide NOT retractable) - SMW-AUTOBLOK SLU-3, self-centering steady rest, clamping range Ø 12 - 152 mm - Full clamping cylinder for partial hollow clamping, draw tube bore max. Ø 100 mm - In-process measuring system Renishaw for X-/Z-/C-axis - Programmable CNC tailstock on W-axis - Drilling/milling spindle and C-axis 0.001° - Tool changer: 80 positions Tool system: HSK-A63 - Y-axis travel +115/-115 = 230 mm - B-axis 225°, positioning in 0.001° increments Hnjdpfx Asxmirgehyog - ICS / internal coolant supply for driven tools - Synchronized thread cutting with driven tools - Software for use of multifunctional tools, e.g. special tool with radially arranged indexable inserts, which can be positioned in the drilling/milling spindle at 60°, 90°, 120° and 180° positions - Software for gear hobbing for straight and helical gearing with speed synchronization of main and milling spindles - Electrostatic extraction unit - Chip conveyor - Documentation - CE marking

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams Hsdpfx Ahsb A H Rysyeng -Tube diameter outside: 180 mm -Piston: Ø 115/145 mm -Stroke: 620 mm -Weight: 87 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 42,140 h, machine/vehicle number: 082170115104, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: IPG, laser source model: YLS-4000-CUT, laser hours: 42,140 h, laser power: 4,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 5 mm, sheet thickness copper (max.): 5 mm, pipe diameter (max.): 120 mm, pipe length (max.): 4,500 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, type of cooling: water, Equipment: centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, type plate available, For sale: Fiber laser for cutting sheet metal, profiles, and tubes – BLM LC5 combo 4000 W. The laser is fully operational and has been serviced until the end by BG POLSKA – BLM Group. We have two Precitec cutting heads for the laser. One is brand new and installed on the machine; the other is refurbished and kept as a spare. This allows for uninterrupted production in case of a malfunction, as you can simply swap the head. We also have a large stock of consumable parts: nozzles, ceramics, protective lenses, a securely sealed lens replacement kit, supports for tubes and profiles, etc. The laser is being sold due to the construction of a new production hall, which prompted a reorganization of the production line. Hedpfx Ahox Ubkaoyeng The machine features automatic nozzle exchanger, automatic centering, and automated tube and profile loading. CNC programming software – Lantek Expert (3 licenses) Year of production: November 2017 I encourage you to see it in operation on-site.

Condition: used, Year of construction: 2014, Technical details: grinding diameter max.: 3-220 mm regulating wheel width: 500 mm max. width of grinding wheel: 500 mm Hnedpjt Uw Avjfx Ahyeg weight of the machine ca.: 16 t. dimensions of the machine ca.: 12 x 10 x 8 m. grinding wheel diam. min/max.: 420-610 grinding wheel diameter - width-internal grin: 304,8 x 500 mm Regulatin wheel diameter min/max.: 300-350 mm The machine is currently designed for plunge grinding JUPITER's Centerless grinding, also available with CBN. Junker this circular grinding method with CBN grinding wheels, which opens up significant productivity benefits from the long service life of the grinding wheel, especially at high volumes. In addition, the simultaneous removal takes on the entire Schleswig-Holstein, which provides both in mass production and in small batches for significantly reduced processing times. The grinding process with JUPITER When centerless grinding, there are two grinding processes: the through grinding and plunge. Both methods are possible with the JUPITER. Applications through grinding: Pin and Bushings Body, rings, smaller rings, piston parts (eg compressors), waves with constant diameter piston rods (eg shock), Small piston for hydraulic and fuel injection, precision wires and rods, piston pins. Applications Plunge: Rotor shafts, transmission parts, bearing surfaces of camshafts, tube and pipe fittings for composite camshafts, universal joints, parts for needle injection, valve stems, barrel rolls. *

Condition: good (used), Year of construction: 2008, control type: CNC control, Stainless steel tube diameter: up to 42 x 2.0 mm Steel tube diameter: up to 42 x 3.0 mm Max. bending angle: +/- 180 + 10° Section modulus: 4.1 ccm Operating pressure: 6 bar Total power requirement: 5.5 kW Machine weight approx.: 3 t Hodpjx T Diiefx Ahyjng Space requirement approx.: 6100 x 2300 x 1300 mm

Condition: used, functionality: fully functional, total height: 5,200 mm, pressure: 1 bar, tank capacity: 25,800 l, inner diameter: 2,900 mm, TECHNICAL SPECIFICATIONS - Flat-bottom tank on legs - Material: stainless steel - Capacity: 25,800 litres RING - 1 ladder support bar Hnjdpfx Ahexz Da Ijyeg - 1 lifting tube - 1 support and level tap - 1 oval autoclave door - 1 partial drain valve on square flange BOTTOM - Flat - 1 total drain valve on square flange - Feet DIMENSIONS - Diameter: 2,900 mm - Height: 5,200 mm

Condition: new, Incl. parabolic suspension / spare wheel / continuous ramp / lockable coupling head / spiral cable Technical Data: • Brand: Ifor Williams • Model: GX125HD • Vehicle type: Construction machinery trailer • Vehicle condition: New vehicle • First registration: without initial registration • TÜV/Inspection: 2 years from first registration • Internal dimensions (LxWxH): 366 x 157 x 30 cm • External dimensions (LxWxH): 570 x 209 x 163 cm • Loading height (floor): 38 cm • Permissible total weight: 3,500 kg • Unladen weight: 752 kg • Payload: 2,748 kg • Chassis: Low-loader (wheels beside platform) • Tyres: 155/70R12C • Suspension: KNOTT parabolic spring suspension • Jockey wheel: Yes • 100 km/h approval: Optional, retrofittable DESCRIPTION • Reinforced side panels with tread plate, walkable • 24mm anti-slip and waterproof plywood floor • Extremely stable, welded lattice tube frame • Frame completely hot-dip galvanized by immersion • Full-length 120 cm steel mesh ramp with support • Spindle lock ramp fasteners, extremely robust and rattle-free • Lift assist for tailgate • Very low chassis for minimal loading angle • Front excavator bucket support • Spare wheel mounted underneath bucket support • 6x lashing rings mounted in the side wall • KNOTT leaf spring axles for heavy-duty use • Automatic reverse function • KNOTT overrun brake system and parking brake • Lockable coupling head • Heavily reinforced bolted V-drawbar • 13-pin plug • Detachable plug cable at front bulkhead • Reversing lights • Large-dimension safety lighting • Integrated rear fog lamp • Lights recessed in rear frame Hnedpfsx S Rkdsx Ahysg • Heavy-duty centre jockey wheel Optional accessories – please inquire: Various accessories can be retrofitted to this trailer as shown in the photos, e.g.: - 4x folding lashing rings (deck anchors) in the floor New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery possible - All prices include VAT - Registration documents can be sent in advance, or German export/temporary plates can be provided - Export plates incl. customs declaration available Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available! We have been a specialist dealer and repair workshop for over 30 years for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many more brands. - Subject to errors, omissions, and prior sale -

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Outer tube diameter: 168 mm -Piston rod: Ø 80 mm -Stroke: 420 mm -Piston rod mount: Ø 40 mm -Piston diameter: 140 mm -Measurement eye to eye: 770 mm retracted -Measurement eye to eye: 1190 mm extended -Quantity: 2 pieces available -Price: per piece Hnjdpeb A H Rvefx Ahyog -Weight: 75 kg

Condition: new, empty load weight: 4,100 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 4,880 mm, loading space width: 2,420 mm, loading space height: 980 mm, loading space volume: 12 m³, suspension: air, tire size: 385/65 R22,5, wheelbase: 1,310 mm, Equipment: ABS, Frame Central-axle welded steel frame construction in weight-optimized lightweight design with tipping booms and rear tipping shaft; Plug lock for tipper body with crossover locking device Towing device Cranked drawbar with height-adjustable heavy-duty screw towing eye 50 mm (- approx. 110 mm) Support device 1 mechanical support winch with crank on the left in the direction of travel, 1 bolted-on step bar SAF intradrum axles with drum brakes, S-cam brake 420/180 mm, load capacity 9 t/axle, reinforced axle beams, off-road version, automatic brake slack adjuster Without axle lift Braking system/Suspension Braking system according to ECE Directive R13 Dual-line compressed air braking system Knorr braking system EBS system 2S2M, 2nd axle with sensor RSS/RSP - Stability Program Spring-loaded parking brake on 2nd axle Aluminum air reservoir Brake/air connection lines with 2 individual yellow/red coupling heads EBS/ABS connection cable Hose lines routed under the drawbar Electronic air suspension with automatic lowering device via inductive switch and additional lowering lock via rotary switch on the trailer Without lifting and lowering device Assistance/safety systems SWIT - Schwarzmüller Intelligent Telematics, "LOCAL TRAC" service package Tipper body Steel welded construction Fixed 4 mm sheet steel front wall, approx. 980 mm high 2 access bars inside and 1 outside on the front wall Fine-grain special steel floor plate, 5 mm (Slight floor undulation possible due to welding distortion) 5 pairs of 5 t swivel lashing rings (width between lashing rings approx. 2,320 mm) 1-piece reinforced 60/40 mm aluminum hollow profile side walls, approx. 980 mm high, foldable with extended swivel bolt locks and spring-loaded lifting aid, also swingable Left and right side walls with manual central locking Two rear corner pillars at side height, permanently attached to the sides 4 mm sheet steel rear wall (HB400), approx. 980 mm high, swingable with recessed bearings, hooks for dosing chains on the rear wall and underside of the bridge Rear wall locking = automatic pneumatic closure With sealing strips Hydraulics Single-pipe system with hydraulic connecting hose including SVK DN13 plug-in coupling Tipper press for 3-way tipping, initial lifting force approx. 30 t; 1 safety rope Tarpaulin Plastic roll-up tarpaulin including aluminum tube and hand crank, side overhang approx. 400 mm, without customs seal, horizontal tarpaulin bracket rope lacing on the right side in the direction of travel, zigzag lacing at the front and rear; Stop bracket and locking device for rolled-up tarpaulin on the right side in the direction of travel; Bracket for hand crank Tarpaint attachment on the left in the direction of travel with two tensioning straps including rubber pads and turnbuckles on the underside of the bridge Tarpaint color similar to RAL 9006 White Aluminum Paint finish Steel granulate cleaning, multi-layer epoxy zinc phosphate primer, and spray painting with a two-component polyurethane topcoat Chassis = RAL 7021 Black Gray Tipper body including front wall = RAL 7021 Black Gray Side walls = RAL 7001 Silver Gray Rear corner pillars = RAL 7021 Black Gray Rear wall = RAL 7021 Black Gray Wheel hubs black = powder-coated Support feet black = powder-coated Hnodpfswc Tbmsx Ahyog Side impact protection = factory selection Plastic parts black, unpainted Powder-coated attachments/built-in components black Hot-dip galvanized attachments/built-in components unpainted Errors excepted

Condition: used, Year of construction: 2001, Technical details: grinding diameter max.: 3-220 mm regulating wheel width: 400 mm max. width of grinding wheel: 400 mm grinding motor: 55 kW peripheral speed: max. 45 m/sec regulating wheel dimensions: 350 x 400 x 203 mm dimensions of grinding wheel: CBN 500 x 400 x 304 mm grinding wheel size: KORUND 600 x 400 x 304 mm total power requirement: 75 kVA weight of the machine ca.: 13 t. dimensions of the machine ca.: 4,47 x 2,77 x 2,49 m. Centerless Grindign Machine JUNKER JUPITER 500 CNC SIEMENS in good condition. Including: · 2 robots Kuka KR 16 Year 2007 · CNC loading and unloading device Promot EPL60NC Year 2007 The machine was lately used for grinding of guide bushes (through grinding). Plunge is possible. JUPITER's Centerless grinding, also available with CBN. Junker this circular grinding method with CBN grinding wheels, which opens up significant productivity benefits from the long service life of the grinding wheel, especially at high volumes. In addition, the simultaneous removal takes on the entire Schleswig-Holstein, which provides both in mass production and in small batches for significantly reduced processing times. The grinding process with JUPITER When centerless grinding, there are two grinding processes: the through grinding and plunge. Both methods are possible with the JUPITER. Applications through grinding: Pin and Bushings Body, rings, smaller rings, piston parts (eg compressors), waves with constant diameter piston rods (eg shock), Small piston for hydraulic and fuel injection, precision wires and rods, piston pins. Applications Plunge: Rotor shafts, transmission parts, bearing surfaces of camshafts, tube and pipe fittings for composite camshafts, universal joints, parts for needle injection, valve stems, barrel rolls. * Hjdpfx Aottxg Ijhyjng

Condition: good (used), Year of construction: 1998, Tube diameter: 20 - 60.3 mm Tube feed length: 4500 mm Machine weight approx.: 0.11 t Hsdpfjx T Dhfox Ahyjng Total power requirement: kW Space requirement approx.: 5700 x 1600 x 900 mm - Preselection of 4 bending angles via rotary selector

Condition: used, functionality: fully functional, total height: 5,400 mm, tank capacity: 28,900 l, inner diameter: 2,800 mm, TECHNICAL SPECIFICATIONS - Cylindrical stainless steel tank - Brand: STAI - Material: stainless steel - Capacity: 28,900 litres - Exterior finish: buffed RING - 1 ladder support bar - 1 lifting tube - 1 tasting tap - 1 oval autoclave door - 1 ruler with tap for level - 1 partial drain valve on square flange with stainless steel cap BOTTOM - Flat Hnedpfxsw Tmgps Ahyog - 1 total drain valve on square flange - On legs DIMENSIONS - Diameter: 2800 mm - Height: 5400 mm

Condition: good (used), Year of construction: 2012, operating hours: 48,700 h, laser hours: 11,000 h, laser power: 2,700 W, sheet thickness steel (max.): 6 mm, sheet thickness aluminum (max.): 4 mm, working range: 6,500 mm, Equipment: documentation/manual, safety light barrier, Purchase options: Option 1: Installation, commissioning and partial overhaul and training of up to 3 operators at the buyer's premises with functional guarantee on acceptance. Surcharge, plus transportation and travel costs. Option 2: Workshop overhaul of the machine with commissioning and acceptance in accordance with the manufacturer's instructions at our factory. Installation, commissioning of the machine and training of up to 3 operators at the buyer's premises, free delivery of spare parts up to 6 months after commissioning. Surcharge, plus transportation and travel costs. Delivery time +8 weeks. Hnsdpfx Ajivaqiehysg After completion of the work, the machine can be inspected under production conditions, we look forward to your visit Standard equipment - Sturdy machine frame with integrated laser unit - TruFlow 2000 high-frequency excited CO2 laser, cooling unit - Drives: Maintenance-free three-phase servomotors - NitroLine high-pressure cutting - Fast processing with SprintLine - Programmable cutting gas pressure setting - Laser cutting head with 5'' lens - Cutting head quick-change device - Laser power control - Laser logbook function - Automatic switch-off - Work area lighting - Sinumerik 840D control system: Open control system based on PC, simple operation, online help, diagnostic function, maintenance logbook, technology data, teleservice, 3.5'' floppy disk drive, RJ45 network connection - Safety: Multi-beam light barriers, fully encapsulated and ventilated beam guidance, compact dust extractor, protective cabin - PRS 3001 ejection station with brush table - Set of clamping jaws D 20-85mm and D 85-150mm - 1 set of V-shaped molds and guide rollers for round pipes - 1 set of U-shaped forming shells and guide rollers with an enveloping circle diameter of 120mm Special equipment: + 2000 on Laser TruFlow 2700 + SeamLine Tube + LoadMaster Tube 6.5 m with bundle trough and plastic rollers + Discharge station 3m with belt table + Focus line + Additional tube support + finished part length + 1.5m

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 6 h, load capacity: 230 kg, empty load weight: 2,800 kg, fuel type: hybrid, drive type: Hybrid, arm reach: 9,600 mm, working height: 15,900 mm, Truck mounted platform Technical condition: New Description: Standard equipment: Hydraulic rotation of the basket 90º + 90º tower rotation by 700º Aluminum basket: Dimensions 1200 x 700 x 1100 mm Front fixing of the basket Tubes and cables installed in the arm Automatic closing of the aerial part Automatic stabilization of the lateral stabilizers H + H with extra lift Automatic stabilization controls from the basket and from the ground Proportional electro-hydraulic control with speed regulation of all movements Proportional electro-hydraulic control with speed regulation of all movements Automatic regulation of engine speed Possibility of simultaneous operation Indicator for centering the aerial section on the basket 230V and 12V socket on the basket Electronic CAN-BUS management system Powder-coated cataphoresis treatment 4 floor plates Coming Home function Outline lighting for boom and turret Socage Connect Paintwork for arm and column parts: White RAL 9016 Frame paint finish: Black RAL 9005 Head and hydraulic cylinder paint finish: Blue RAL 5015 Payload: Approx. 500kg on Piaggio Porter Manufacturer's warranty until 14.06.2025 Hnedotuyqqspfx Ahyjg Air/water connection (100 bar) 12V or 24V emergency electric pump Socage Connect

Condition: new, Year of construction: 2020, Your employees achieve more. • Standard surface 1 .0 x 2.0 Meter • Ergonomic design. • Robust concrete table to reduce noise. • Nailing tacker within reach (by a central arm and a spiral tube). • Clear light directly at the work space • Central connection for both electricity and pressed air. • Frame also serves as a buffer for compressed air. Hnedpfefkiw Rex Ahyeg Options: • Two drawers. • Balancer for 4.5 – 9 kg or 2.5 - 5 kg. • Small table for second tacker. There are different ways to personalise your workbench. Cekamon Saws delivers custom made products.

Condition: used, Year of construction: 1999, Technical details: working area: 10700 mm Tube length: 300-11000 mm min. workpiece diameter: 80 mm max. workpiece diameter: 260 mm Power: 120 KW Hodpfevizuiex Ahyjng dimensions: 21,5 x 5 x 3,8 m mm weight: 90.000 kg pre-turn capacity: 200 cdm/min HS Code: 8461 90 00 Description of the system Manufacturer / Type Vario 1200-11000 Year of manufacture 1999 Intended use peeling machine for pipes and solid material with ultrasonic measuring system for detection of wall thickness deviations and correction of the same. Machine control SIEMENS 840 D - 6 axes Max. speed on the scraper/peeling device: n = 200 min-1 *

Condition: good (used), Year of construction: 1994, control type: CNC control, controller manufacturer: Siemens, controller model: 840 D, Pipe diameter: 168.3 x 11 mm Pipe insertion length: 6000 mm Maximum bending radius: 700 mm Control system: Siemens 840 D Minimum bending radius: 80 mm Maximum bending angle +/-: 190 ° Connected load: 400 V / 50 Hz / 85 A Dimensions (L/W/H): 11.9 x 2.7 x 2.45 m Machine weight approx.: 33 t Additional information: - CNC control: CNC MMI Multicontrol 2000 - Control system NCU - PLC: Siemens Simatic S7 - Electrical connection: 400V / 50 Hz / 85 A Hnsdpfxjx T Dgue Ahyog The machine is fully automatic and equipped with a tool changer. The following tooling is available: Pipe Ø 48.3 mm; Radius 105 mm Pipe Ø 60.3 mm; Radius 120 mm Pipe Ø 63.5 mm; Radius 150 mm Pipe Ø 76.1 mm; Radius 190 mm Pipe Ø 88.9 mm; Radius 222 mm Pipe Ø 114.3 mm; Radius 285 mm Pipe Ø 139.7 mm; Radius 350 mm Pipe Ø 141.3 mm; Radius 700 mm Pipe Ø 168.3 mm; Radius 420 mm A few mandrels have a direct engraved marking. These have the following specifications: 88.9 x 8 mm; 88.9 x 4.5 mm; 114.3 x 8.8 mm; 139.7 x 8.8 mm; 168.3 x 12.5 mm; 168.3 x 8.8 mm The following outside diameters of the mandrels were measured: 23.2 mm; 32.3 mm; 37.1 mm; 41.5 mm; 59.3 mm; 70.3 mm; 77.7 mm; 80.9 mm; 88.7 mm; 93.2 mm; 94.7 mm; 103.0 mm; 112.8 mm; 118.8 mm; 128.9 mm; 138.5 mm; 147.2 mm; 153.6 mm The accessory package is valued at approximately €150,000.

Condition: used, functionality: fully functional, TECHNICAL SPECIFICATIONS - Flat-bottom tank on legs - Brand: LAGOUARDE - Material: stainless steel - Capacity: 23,500 litres - Waxed exterior finish RING - 1 ladder rung - 1 lifting tube - 1 rectangular autoclave door - 1 tasting tap - 1 support and level tap - 2 partial drain valves on square flange BOTTOM - Flat - 1 total drain valve on square flange - On legs DIMENSIONS - Diameter: 2,600 mm Hnjdpfjxz Dulox Ahyeg - Height: 5,400 mm

Condition: reconditioned (used), Year of construction: 2005, laser hours: 11,000 h, laser power: 2,700 W, sheet thickness steel (max.): 6 mm, sheet thickness aluminum (max.): 4 mm, working range: 6,500 mm, Equipment: documentation/manual, safety light barrier, Purchase options: Option 1: Installation, commissioning and partial overhaul and training of up to 3 operators at the buyer's premises with functional guarantee on acceptance. Surcharge, plus transportation and travel costs. The machine can be inspected under production conditions, we look forward to your visit Special equipment: + 2000 on Laser TruFlow 2700 + SeamLine Tube Standard equipment - Sturdy machine frame with integrated laser unit - TruFlow 2000 high-frequency excited CO2 laser, cooling unit - Drives: Maintenance-free three-phase servomotors - NitroLine high-pressure cutting - Fast processing with SprintLine - Programmable cutting gas pressure setting Hnedpouwkq Tjfx Ahyeg - Laser cutting head with 5'' lens - Cutting head quick-change device - Laser power control - Laser logbook function - Automatic switch-off - Work area lighting - Sinumerik 840D control system: Open control system based on PC, simple operation, online help, diagnostic function, maintenance logbook, technology data, teleservice, 3.5'' floppy disk drive, RJ45 network connection - Safety: Multi-beam light barriers, fully encapsulated and ventilated beam guidance, compact dust extractor, protective cabin - PRS 3001 ejection station with brush table - Set of clamping jaws D 20-85mm and D 85-150mm - 1 set of V-shaped molds and guide rollers for round pipes - 1 set of U-shaped forming shells and guide rollers with an enveloping circle diameter of 120mm Special equipment: + 2000 on Laser TruFlow 2700

Condition: good (used), Ring bending machine, profile bending machine, bending machine, pipe bending tool, pipe bender, pipe bending machine, mandrel bending machine Hnjdpfsx Nfhrex Ahyog -Manufacturer: Dako Gedore, electro-hydraulic pipe bender on a mobile base -Pipe diameter: 3/8" to 3" -Stroke: 320 mm -Motor: AEG 1.5 kW -Accessories: incl. bending jaws up to 3" (see photos) -Transport dimensions: 1140/1045/H1200 mm Total weight: 389 kg

Condition: ready for operation (used), Pull tube for tensioning device from IKEGAI TURN 25 , length tube: 730 mm, Ø 75 mm, hydraulically operated, used, normal signs of wear, 100% functional ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please inquire for charges for packing and transport separately! Hjdpfox Nlurjx Ahyong

Condition: used, functionality: fully functional, TECHNICAL SPECIFICATIONS - Conical bottom tank on legs - Material: stainless steel - Capacity: 8,800 litres - Exterior finish: cork-finished RING - 1 refill tube - 1 ladder support bar - 1 tasting tap - 1 oval autoclave door - 1 support and level tap BOTTOM - Conical Hjdjw E D Amspfx Ahyjng - 1 total drain valve on square flange - 5 stainless steel feet with plates DIMENSIONS - Diameter: 1,900 mm - Height: 4,100 mm