Used Tumbling Machine for sale (64,830)

Condition: used, Year of construction: 2012, Control Siemens 840 D weight of the machine ca. 13,5 t dimensions of the machine ca. 7m x 4m x 2,75m m Accessories: Coolant tank Grinding wheels Various spare parts Crodpsxh Rqtefx Aktoi Operating and maintenance instructions CE conformity Dimensions: 7x4x2.75 m ( LxWxH) TECHNICAL DATA: Workpiece data: max. outer diameter: 250 mm with max. grinding wheels Ø 450 mm max. diameter to be machined over table: 375 mm Profile depth for dressable grinding wheels: 40 mm max. workpiece length: 3,600 mm max. distance between centers (1): 2,800 mm max. bevel angle: +/- 90° Number of teeth of the workpiece: 1 - 999 max. weight of the workpiece: 250 kg Working area: Center distance between workpiece and tool spindle: 355-170 mm Radial travel: 185 mm Axial travel: 3,000 mm Swivel angle: +/- 90°

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: M22-0012, mandrel length: 1,800 mm, mandrel diameter: 1,500 mm, type of input current: AC, total width: 1,800 mm, roll diameter: 1,500 mm, overall weight: 3,000 kg, product width (max.): 1,800 mm, input voltage: 480 V, General Features The single-shaft slitter rewinder uses independent presses for accurate, safe rewinding. Unwinder A shaft-less unwinder allows floor-level reel loading and dual rotation directions. Pneumatic-mechanical chucks secure the reels. Rollers and Alignment Aluminum rollers enhance durability and lightness. An automatic web aligner centers the master reel using edge detection. Tension and Cutting Control AC motors, load cells, and diameter calculation control unwind tension. The shear-type cutting group features 14 circular blades with pneumatic supports and has a quick-change counter-blade shaft. Curved rollers and suction nozzles manage cut separation and scrap removal. Rewinding Presses and Holding Steel, molybdenum-coated presses ensure longevity. Motorized tips enable automatic reel positioning. Rewinding Control A steel pressure roller—pneumatically operated with a proportional valve—sets pressure. Rewinding torque is managed via operator panel controls. A pneumatic clamp and two AC motors balance tension. Discharge and Safety Systems A hydraulic shovel and pusher facilitate reel discharge. The area is secured by a safety barrier. Control and Automation System AC motors and vector drives (SIEMENS) with proprietary software handle diameter calculation and torque control. All functions are accessible via a touch terminal with PLC communication. Crodpfxey Ufgro Aktsi

Condition: good (used), Year of construction: 2007, max. wheel diameter 500 mm gear width 200-400 mm module 12 turning speeds 0-3250 U/min bracke pressure bis max. 95 Nm inner taper Konus #39 Control Fanuc 16 total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 2.350 x 2.240 x 2.500 mm HIGHLY FLEXIBLE TESTING OF HARD, FINISHED AND GREEN SPIRAL BEVEL AND HYPOID GEAR SETS The T 60 bevel gear testing machine is a CNC testing machine with three linear axes for the fully automatic hard and soft testing of spiral bevel and hypoid gear sets with a 90° axis angle. It offers versatile objective and subjective testing options with speeds up to 3,250 min and braking torques up to max. 95 Nm. Crjdpfx Aevr Hf Eektoi

Condition: like new (used), Year of construction: 2017, max. wheel diameter 100 mm gear width 26 mm max. module 31 min. module 0,1 Control Siemens 840 D SL Number of working hours 9598 h total power requirement 45 kW weight of the machine ca. 7,8 t dimensions of the machine ca. 4,40x3,95x3,01 m Gleason 100S gear shaping machine for the production of internally and externally toothed cylindrical gears and other cylindrical workpiece circumference regularly occurring profiles and moulds as well as for the production of profiles using the single part process. Technical data: Nominal workpiece diameter 100 mm Largest circumferential diameter 150 mm Cedpsv Ehbbjfx Aktsri Machine nominal module approx. 3 mm (Guide value depending on the respective machining task.) Shaping spindle stroke speed range 0 - 3,000 1/min Stroke position adjustment range (manual) 20 mm Largest toothing width 26 mm Smallest pitch height of the hydrostatic inclined guide 400 mm Smallest/largest distance between tool axis - 20/+ 180 mm and workpiece axis Stand inclination range (manual) - 1/+ 11° Tool holder (manual clamping) HSK-D63 (hollow shank taper according to DIN 69063) Weight of the machine approx. 7,000 kg with robot cell

Condition: used, Year of construction: 2000, machine/vehicle number: VH20011, controller model: Heidenhain TNC 426, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS CNC control: Heidenhain TNC 426 Tool holder: SK 50 EQUIPMENT Rotary milling head Various tool holders Note: The machine is sold without tools. Credpfx Ako Ah Dtwstoi

Condition: used, Year of construction: 2000, travel distance X-axis: 4,000 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain TNC 430M, overall weight: 12,000 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 4,000 mm Travel range Y-axis: 550 mm Travel range Z-axis: 600 mm MACHINE DETAILS Csdpfx Ao Ah Dryjkteri CNC control: Heidenhain TNC 430M Tool holder: ISO 40 Tool magazine: 22 tool positions Note: The machine is sold without tools.

Condition: good (used), Injector for plastering machine, gypsum plastering machine -Injector: for cleaning machine -Connections: see photos -Dimensions: 1420/640/H930 mm -Weight: 57 kg Crjdpj Ah Dwtsfx Aktsi

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand accessory: the ‘Canon Staple Finisher-AG1’ finishing system Item for sale: Cedpfx Akez A Akfstjri 1 x Canon Staple Finisher-AG1 Condition: This listing is for a second-hand accessory, which may show signs of wear (minor scratches or discolouration). The accessory has been tested to ensure it is in working order. Packaging and dispatch: You are welcome to view the item during our opening hours. Please arrange an appointment to do so! Sturdy packaging and worldwide dispatch available on request! For further information, please feel free to contact us directly.

Year of construction: 2026, condition: new, The VOGEL V540E is a high-performance, automated paper cushioning machine and one of the most efficient paper void fill systems in its class. It processes wide paper rolls up to 500 mm and produces high-quality, three-dimensionally structured paper cushions (“paper bubble cushions”) with outstanding cushioning properties. Ideal for professional packing stations, logistics centers, and larger e-commerce operations seeking an ecologically sustainable, high-performance, and cost-effective alternative to conventional bubble wrap. With automatic length control and an optional winding mode, the V540E is capable of producing both loose cushioning pads as well as complete cushioning rolls for storage or further processing. Advantages: - The VOGEL V540E is a high-performance, automated paper cushioning machine and among the most efficient paper filling systems in its category. - It processes wide paper rolls up to 500 mm and produces premium, three-dimensional structured paper cushions (“paper bubble cushions”) with excellent shock-absorbing properties. - Perfect for professional packing areas, logistics centers, and large e-commerce frameworks requiring an environmentally friendly, high-capacity, and cost-effective solution to traditional bubble wrap. - Thanks to automatic length control and optional winding mode, the V540E can manufacture both loose cushion pieces and full-length cushion rolls for storage or further processing. Special Features: - Easy operation Codpfj Ah Eyqsx Aktsri - Excellent price-performance ratio - Optional winding station / automated cushion roll production - Optimal replacement for bubble wrap - 100% recycled paper Our Service for a Strong Partnership: - Free technical hotline - Long-term spare parts availability - 99% of spare parts available within 24/48 hours - We supply the right consumables for your application! About us: Since the early 1980s, we have accumulated practical expertise in handling packaging machinery. This makes us true experts – not just in the machines themselves, but also in their functionality, strengths and weaknesses, applications, consumables, and cost-benefit ratios. We always pass this experience on to our customers. For example: Attention! Mistakes in selecting a new product can quickly lead to high costs, making your investment uneconomical or resulting in insufficient performance!

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, machine/vehicle number: CIP-8P_1003, overall weight: 320 kg, total length: 650 mm, total width: 2,300 mm, total height: 1,100 mm, warranty duration: 36 months, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, type plate available, Pneumatic Press-In Machine CIP-8P Technical Data: Pressing force 80 kN, approx. 8 tons Force setting via display, accuracy 1 kg Compressed air 8 bar, min. 150 l/min Csdpfx Ao Ah Sgvjktsri Tool and shank diameter: Total length 37 or 76 mm, of which 15 mm is in the holder, Ø 12.7 mm Compatibility: Tools from other manufacturers can also be used External dimensions (L × W × H) and weight: 650 × 2,300 × 1,100 mm, 400 kg Warranty: 36 months after delivery

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Tool milling machine Kunzmann WF4/3 with Heidenhain TNC 124 control, manufactured in 2008. Excellent CONDITION, CE-compliant!! Technical data: >> Year of manufacture: 2008, Machine No. 346199 >> Fixed angular table >> Speed: continuously variable up to 4000 rpm >> Feed rate: continuously variable in 3 axes from 0 to 2000 mm/min >> Travel distances X/Y/Z: 400/350/400 mm >> Rapid traverse rates x/y/z: 5 / 5 / 4 m/min >> Table surface: 650 x 350 mm Codo Ah Tvbjpfx Aktsri >> Table load: 250 kg >> Quill stroke, vertical: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1700 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 12 kVA Accessories and equipment: >> Heidenhain TNC 124 control >> Hydraulic clamping, vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual for the control system and programming examples >> Handwheels >> Coolant system About the machine: Offered for sale is a Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 124 control. This universal milling machine is in very good condition. It comes from a company where it was used only sparingly for training purposes. It features a very easy-to-use control system. Furthermore, the machine has hydraulic clamping in both vertical and horizontal positions. Switching from vertical to horizontal is very easy, by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Kunzmann on-site while it is powered up.

Condition: used, Year of construction: 2007, Manufacturer: CFS Model: CrumbMaster600 Year: 2007 Creds Ah Tl Iopfx Aktoi Condition: Used Serial number: 529 Stock number: 3467 Belt width: 600 mm Belt speed: 2 - 20 m/min Power: 3 x 400V, 50Hz, 2kW Dimensions: 2750 x 1150 x 2200 mm Weight: 560 kg CFS breading machine for all types of breading flour and crumbs. Belt and blowing device with variable speed control.

Condition: used, ZOCCA RU 2000/3 UNIVERSAL CYLINDRICAL GRINDING MACHINE • Manufacturer: Zocca (Como, Italy) • Model: RU 2000/3 (External / Hydraulic Universal Grinder) • Center Height: 180 mm • Maximum Grinding Diameter: 360 mm • Distance Between Centers: 2,000 mm • Drop down Internal Spindle • Steady rests • Coolant system • Spare wheels Codpfxj Ah H D Nj Akteri • Safety foot switch • Machine manual

Condition: good (used), Year of construction: 1954, wire dia. . mm wire length . mm pulling capacity 7 t total power requirement . kW weight of the machine ca. . t dimensions of the machine ca. . m Cedpj Ah Id Nofx Aktsri

Condition: used, Year of construction: 2020, functionality: fully functional, Industrial Throughfeed Grinding Machine – IFS IF-Vario M1600EC Serial number: 2368 Manufacturer: IFS Ceds Ah Swtopfx Aktori Machine type: IF-Vario M1600EC Total connected load: 152 kVA Total weight: approx. 12,000 kg The machine is equipped with two motor spindles, each capable of delivering a maximum power of 48 kW. The grinding process is performed using diamond grinding wheels with a diameter of 600 mm and a maximum peripheral speed of 32 m/s. The system allows for the processing of workpieces with a thickness of up to 45 mm. The adjustable grinding allowance ranges from 0.8 to 25 mm. The workpiece feed rate can be continuously adjusted within the range of 20 to 240 mm/s. Electrical and technical connection data: Supply voltage: 400 V Mains frequency: 50 Hz Rated current: 220 A Required fuse rating: 250 A Connected power: 152 kVA Control system: Siemens 840D sl Measuring and control system: DISKUS IONIC 18 Media supply: Compressed air connection: 6 bar Compressed air consumption: 150 l/min Coolant flow rate: 250 l/min Integrated extraction system Dimensions and weight: Machine dimensions including coolant filtration system: 4,600 × 5,200 × 3,000 mm (W × D × H) Machine weight: approx. 11,000 kg Total weight as stated: 12,000 kg Existing equipment: Automatic workpiece loading via conveyor system Integrated measuring probe for workpiece measurement Automatic good/bad part sorting (I.O./N.I.O.) Camera-assisted grinding wheel breakage detection Coolant supply with filtration system Extraction system

Condition: used, Year of construction: 1999, Description of Hundegger K1-A Equipment: 1. Cross-sections: 20 x 60 to 300 x 450 mm 2. Infeed cross conveyor: 7 strands, 2.2 m 3. Undercutting miter saw 4. Universal milling machine - Roller cutter - Finger cutter 5. Combination support for vertically operating tools - 1 drilling unit - 1 finger milling machine 6. Combination support for horizontally operating tools - 1 drilling unit - 1 slotting machine 7. Beam turning station, fully automatic Machine installation: 8. Substrate, foundation: - The base plate must have a thickness of at least 10 cm (with corresponding good reinforcement). - This should be level and suitable for anchoring. 9. Energy requirements, type, quality, quantity: 09.1 Electrical: - Voltage: 400/230 V, 3/N/PE - Fuse rating: 3 x 63 A Crsdpfs Ah Swwsx Aktsi - Frequency: 50 Hz - Peak demand: 15 kW - The mains voltage must be constant and uninterrupted within the specified tolerance range! 09.2 Compressed air: - Flow rate: V < 600 l/min - Pressure: Operating pressure p = 8.5 bar - Maximum permissible pressure p = 10 bar Important: The control system was updated by Hundegger from MIPPS to CAN in autumn 2020. Price ex works, location D-91154 Roth: 25,000.00 EUR

Condition: new, Year of construction: 2026, machine/vehicle number: MH-FJ-3A, The VOGEL MH-FJ-3A carton sealing machine is equipped with a lid sealing mechanism, i.e. the cartons can be fed in an open state. The short and long lid parts of the carton are closed first, only then is the carton glued. Carton formats: Length 150 - 600 mm Width: 115 - 490 mm Height: 110 - 510 mm Technical data: Length 1,800 mm Width 880 mm Weight 300 kg Operating voltage 220 V Air 5 kg/cm2 CE marking Codpe Ah E Sijfx Aktori IMPORTANT: An air pressure supply is required to operate the machine, which is not included in the scope of delivery. Accessories: For our VOGEL carton sealer program we offer rollers, leading and trailing tables, roller conveyors.

Condition: used, total height: 2,850 mm, total length: 3,600 mm, total width: 1,500 mm, Year of manufacture: 2011 Colour: Grey Weight: 1.800 kg Resaw Centauro R1000 + RTF Machine number 19602 Year of construction 2011 Wheel diameter 1000mm Max cutting height 520mm Max cutting width 970mm Max saw blade width 110/80x1mm Max min saw blade length 6570/6380 Table size 1500x920mm Speed 570 Rpm 22kW (30hp) Required extraction capacity 2500 m³/h Working pressure 6-8 bar Dimensions 2255x2200x3000mm (LxWxH), weight 2300kg - Year: 2011 - CE marking present: Yes - Serial number: 19602 - Saw direction: vertical - Main motor power [kW]: 22.0 - Wheel diameter [mm]: 1000 - Max. cutting to feed roller opening [mm]: 300 - Max. cutting to stop opening [mm]: 370 - Max. cutting height [mm]: 4750 - Table width [mm]: 900 - Table length [mm]: 1380 - Feed roller type: Automatic electric - Extraction port diameter [mm]: 220 - Options: Tiltable fence - Voltage [V]: 400 - Fuse [A]: 63 - Power [kW]: 25.0 - Transport dimensions: 3600mm x 1500mm x 2850mm (l x w x h) - Transport weight [kg]: 1800kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels Crsdpfx Aksz H T U Astji

Condition: used, Year of construction: 1979, Table dimensions 1300-800 mm Weight 4,7 to. Year 1979 Crjdpezhcizofx Aktji x-travel 1000 mm angular milling head ja documentation ja serial number 733 weight of the machine ca. 4,7 t

Condition: used, total height: 2,700 mm, total width: 3,000 mm, total length: 5,300 mm, Year of manufacture: 1992 Colour: White Empty weight: 11.000 kg Price: On request - Year: 1992 - Serial number: 9220212 - Drive system: Conventional - Bed milling machine model: Movable table - Number of axes [pcs]: 3 - X-axis travel [mm]: 3200 - Y-axis travel [mm]: 1000 - Z-axis travel [mm]: 1000 - B-axis rotation [°]: 360 - C-axis rotation [°]: 360 - Table length [mm]: 3500 - Table width [mm]: 800 - Tool holder: ISO50 - Main spindle power [kW]: 15 - Min. spindle speed [rpm]: 40 - Max. spindle speed [rpm]: 2000 - Max. workpiece weight [kg]: 4000 - Options: Digital readout - └ Type of digital readout: Sony 3-A Cjdpfx Akjzwn Egetori - Transport dimensions: 5300mm x 3000mm x 2700mm (l x w x h) - Transport weight [kg]: 11000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, functionality: fully functional, NEW CT-160 industrial screw press dewatering machine - in stock at our Chino, CA warehouse, ready for inspection and pickup. Continuous solid-liquid separation for wet organic material: food waste, fruit and vegetable pulp and pomace, brewery and distillery spent grain, juice press cake, manure, and plant fiber. The press separates out the liquid and discharges a stackable cake - most loads lose up to two-thirds of their weight before they leave your site. Ideal for SB 1383 organics compliance and cutting hauling and disposal cost. Codpfx Ako Adykrstjri KEY SPECS - Capacity: 0.5 tons/hour (1 m3/h) - compact pilot / small-operation model - Motor: 3 kW / 4 HP (electrical built to order) - Screw speed: low-speed high-torque design - Wedge-wire screen, 0.75 mm slot (0.5 and 1.0 mm spares available) - Discharge cone: adjustable back-pressure - Footprint: 56 x 17 x 58 in - Weight: 700 lbs WHY ZEN SURFACE LLC - Machinery supplier at a fraction of US-built separator prices - FREE live demo: bring your material and watch it run before you pay - Full range in stock or built to order: CT-160 to CT-600 (0.5 - 15 tons/hr) - NEW: GS-1200 twin-shaft shredders - ask about a complete shred + press line Local pickup in Chino, CA. Freight can be arranged anywhere in the US. Message us through this listing for details, pricing and a live material demo.

Condition: like new (used), Year of construction: 1987, Used Giddings and Lewis Model MC 50 Twin Pallet Horizontal Machining Centre with Live Spindle, 60 ATC and G&L 8000A Control System. Serial # 445-1052.Year of Manufacture: 1987 Machine Formerly Installed at Rolls Royce Plc In Derby UK. Immediately for Sale and now Located in Belgium where it can be Inspected. Spindle Diameter - 130 MM Spindle Taper - 50 ISO Spindle Travel (Z Axis) - 915 MM Spindle Speeds (4 Ranges) - 5 to 1500 RPM Main Motor - 30 HP Pallet Size - 1219 x 1245 MM Pallet Rotation Increments - 0.001 DEG (360,000 POSITIONS) Pallet Changer Max Load - 5000KGS Pallet Max Load Without APC - 9000 KGS Longitudinal Travel (W) - 1700 MM Vertical Travel Of Head (Y) - 1500 MM Cross Travel (X) - 1800 MM Feed Rates Per Minute - 1.00MM/MIN TO RAPID RATE Rapid Traverse Rate Per Minute (X And Y) - 4500 MM / MIN Rapid Traverse Rate Per Minute (Z And W) - 3000 MM / MIN Auto Tool Changer - 60 POSITIONS Electrical Supply - 415V, 3PH, 50HZ Crsdeu Dahnepfx Aktji FEATURES AND EQUIPMENT High Pressure (25 Bar) Through Spindle Coolant, High Tolerance Machine. Accurate Machine which was well Maintained and Regularly Calibrated by Manufacturer. Renishaw Probing. Length - 11679 MM Width - 6502 MM Height - 4423 MM Weight - 40329 KGS

Condition: used, Year of construction: 2023, HXCP HX360 Hardcover Casing-In Machine (2023 Model) Note this machine new is over $70,000 USD. Asking for $39,000 or best offer for quick sale. Buyer responsible of removal and shipping. Link to YouTube video is included in the listing. Available for sale is a 2023 HXCP HX360 automatic hardcover notebook/book casing-in machine. The machine was purchased new in 2023 and has been used in our hardcover book production operation. It is designed for automatic casing-in of hardcover books, journals, notebooks, and similar products. We are selling this machine because our production requirements have grown and we are upgrading to a larger, higher-capacity binding line that better fits our current workflow. Crodpfx Akjzbykqjtji The machine is currently located in New Jersey * HXCP HX360 * Year: 2023 * Automatic hardcover casing-in machine * Suitable for hardcover books, notebooks, and The machine is being sold as-is, where-is, with Please contact us for additional photos, videos, specifications, and pricing.

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 170 kg, grinding spindle speed: 45,000 rpm, spindle speed (min.): 5,000 rpm, spindle speed (max.): 45,000 rpm, clamping diameter: 140 mm, clamping length: 1,100 mm, Workpiece Clamping Diameter : ø 3 – 140 mm (Optional: ø 210 mm) Workpiece Diameter : ø 3 – 310 mm Workpiece Length : 50 – 1.100 mm Centre Hole Diameter : ø 1 – 60 mm (Optional ø 100 mm) Workpiece Weight : max. 170 kg (Optional 1,000 kg) Center Hole Angle : 60 ° Accuracy : < 1 µm (Submicron accuracy) Spindle Speed : 5.000 – 45.000 rpm Grinding Cone Movements : 3+1 Rotation Credpfx Aegb Ec Hektji Orbital rotation Stroke movement +1 Workpeice rotation Quirlig Grinding Technique : Included (Cross-hatched grinding pattern) Grinding Process : Semi-Automatic, CNC Control Panel : Beckhoff CNC Movements : Z-Axis Indurstry 4.0 Compatibility : Available Semi-Auto Grinding Cone Dressing : Included Workpiece Rotation : Available (as a option) Dust Extraction And Filtration : Available (as a option) Sectors : Precision Grinding, Aviation, Automotive, Machinery etc. Benefits: Sub-micron Precision: Achieve sub-micron (< 1 µm) precision in grinding thanks to Swiss engineering and a robust machine design. Sustainable Reliability: Ensure reliable and sustainable processing. Cost Efficiency & High Productivity: Benefit from lower production costs and high productivity due to a short grinding process and reduced production times for subsequent processes (cylindrical grinding). Quirlig Grinding Technique: Experience an optimized grinding process with the Quirlig Grinding Technique. Properly ground center holes that have cross-hatched grinding pattern. The cross-hatched grinding pattern ensures that oil is retained when the workpiece is placed between the centers during the cylindrical grinding process, creating a micro oil layer. The micro oil layer prevents unwanted "dry running" during cylindrical grinding. Easy to Use CNC Control Panel: Benefit from very simple operation and grinding program recording with the Beckhoff control panel and Z-axis servo movement. Industry 4.0: Fully compatible with Industry 4.0 applications, thanks to the Beckhoff control panel. Low Maintenance Costs: Enjoy low maintenance costs throughout the machine's service life, thanks to Swiss-quality construction. The Zentroflex SA-series center hole grinding machines are designed to deliver high-precision cylindrical grinding in the aviation, automotive, and machinery sectors. Additionally, the Zentroflex SA-series is the ideal solution for recovering parts distorted after heat treatment or for reducing cylindrical grinding costs. Z-Axis movement is provided by servo motor in CNC form. The part is loaded-unloaded and clamped manually. Settings are made from CNC control panel and grinding is started by pressing the start button. No other manual setting or control is made during grinding. Contact us for more details.

Condition: good (used), Year of construction: 2001, Equipped with: Power Stock Fanuc 5-Axis CNC Control 160M 400mm Honing Wheel Cjdpfx Aksrualpoteri X Axis Pulse Generator Coolant System w/Twin Filters Magnetic Chip Separator Honing Tool Set up for Last Job is Still in Machine Internal Diameter of Honing Tool on Machine is 14" Work Light Power Door Auto Dress 5-Part Program Instruction Book for 16M Control Instruction Book for Set-Up and Operation Specifications: Maximum Outer Diameter: 250 (350) Minimum Outer Diameter: 30 Maximum Overall Length: 400mm Maximum Tooth Width: 45mm Module: 1.0-3.0 Cross Feed Device(Z Axis): 430mm Max. Travel Honing Wheel Cutting Feed Device(X Axis): 370 Max. Travel Honing Wheel Swing Device(C Axis): Swing Angle: +30 Degress Honing Wheel Rotation Drive Device(A Axis): Honing Wheel Spindle Speed R/Min: 500 Honing Wheel Outer Dia.: 300 (400) Maximum Honing Wheel Width: 50mm Crowning Device (Y Axis): Maximum Rocking Angle: 1.6 Degrees Motor Types: Z-Axis Drive Motor: 1.8Kw X-Axis Drive Motor: 1.8Kw Y-Axis Drive Motor: 0.7Kw C-Axis Drive Motor: 1.8Kw A-Axis Drive Motor: 2.2/3.7Kw Maximum Distance Between Centers: 600mm Center Height: 1,100mm Floor Space: 2,170W X 2,800D X 2,100H Mass Of Machine: 4,500Kg