Used Unicontrol 10 for sale (30,180)

Condition: good (used), Year of construction: 2020, functionality: fully functional, overall weight: 170 kg, total length: 705 mm, total width: 750 mm, total height: 1,800 mm, volume flow: 520 m³/h, operating pressure: 10 bar, pressure (max.): 10 bar, noise level: 78 dB, type of cooling: air, Equipment: type plate available, Little-used compressor (90% used for blowing air) from a model-making business for sale: V-belt-driven 2-cylinder unit with two-stage compression for 10 bar pressure, increasing performance and ensuring high efficiency. Tank with baked-on internal coating. 15-year warranty* on the tank against rust. Standard equipment includes all fittings: solenoid valve or pressure switch with relief valve for fully automatic operation, motor protection, safety valve, pressure gauge, check valve, condensate drain valve, and shut-off valve. Standard equipment includes rubber vibration dampers. Electrical connection 400 V/50 Hz (three-phase). Intercooler and aftercooler ensure rapid cooling of the generated compressed air. Dsdpfs Agwf Nex Ak Aokw The low speed reduces vibrations, protects the compressor components, and reduces noise. Large fan impeller for optimum cooling. Easily accessible condensate drain under the tank. Also suitable for easy connection of a condensate drain line (Ecomat). Retrofitting of a refrigerant dryer is possible without any problems. Space-saving solution with a vertical tank. Technical data: Pressure: 10 bar Intake capacity: 660 l/min Speed: 1025 min-1 Tank volume: 270 l Weight: 170 kg Noise: 78 dB(A) Dimensions (W x D x H): 750x705x1800 mm Effective delivery rate: 520 l/min

Condition: good (used), Year of construction: 1987, Press force 1250 t Bending length 15000 mm Upright spacing 10160 mm Dksdpj Ah Ep Iofx Ak Aew Control system CNC 10 graphics Throat depth 770 mm Table length 15000 mm Machine weight approx. 230 t Required space approx. 17000 x 5400 x 5900 mm Additional information: - Press force: 1,250 t - Bending length: 15,000 mm - Control: CNC 10 graphics - Number of controlled axes: at least 10 - Upright spacing: 10,160 mm - Throat depth: 770 mm - Table length: 15,000 mm - Dimensions: 17,000 mm x 5,400 mm x 5,900 mm - Weight: approx. 170 t Equipment: - Crowning device - CNC 10 graphic control - Hydraulic upper tool clamping - Multi-operator functionality - Increased speeds - Automatic, height-adjustable rear sheet gauge - Draw cushion device - Horn length on each side: 2,200 mm

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 201305503797, measuring range X-axis: 1,000 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 600 mm, workpiece weight (max.): 1,150 kg, total height: 2,800 mm, total width: 1,750 mm, total length: 2,300 mm, overall weight: 2,500 kg, Equipment: documentation/manual, - Special equipment: with ZEISS VAST XXT measuring head - Weight: CMM: 2,310 kg - Max. workpiece weight: 1,150 kg - Travel speed: Creep speed: SLOW FUNCTION: 0–5 mm/sec Dkodpo Ahg Nbefx Ak Asw - Set-up mode: MAN mode 0–70 mm/sec - For further technical data, see the photographed documentation - With accessories and documentationIncluding computer, monitor and keyboard Collection: the pick up has to take place on a date to be confirmed between 13.01. and 14.01.2027. FCA-D 71364 Winnenden - loading on truck

Condition: like new (used), Year of construction: 2022, Used Machine Year of Manufacture: 2022 Condition: Like new, very few operating hours, not used in production Features and Technical Specifications: - Compact screw compressor with variable speed control and innovative LOGIN control system - Includes air receiver and refrigerated dryer - Maximum pressure: 10 bar - Effective air delivery: 1,050 l/min - Motor power: 7.5 kW - Noise level: 62 dB(A) - Connection: 1/2 - Tank capacity: 270 liters (AD2000) - Variable-frequency drive - Electronic control - Oil heat exchanger - Compressed air receiver hot-dip galvanized inside and out - Drive transmission: Direct coupling - Starting method: Star-delta - AD 2000 compliant: yes Dimensions: 1,200 × 650 × 1,540 mm Weight: 295 kg Dodpfx Akozk Nrze Ajkw Availability: available shortly Storage location: Röllbach

Condition: used, functionality: fully functional, thread length: 100 mm, overall weight: 4,400 kg, type of input current: AC, metric thread diameter (max.): 8 mm, Equipped with Vibratory Bowl & Helpro Process Monitor Dkedpfszt S Hajx Ak Aow

Condition: excellent (used), Year of construction: 2011, Cronoplast S.L. BabyPlast 6/10 Vp-T⌀12 / Production line with robot, rotary table and additional automation. Year of manufacture: 2011 Clamping unit: Clamping force: 6.25 t Clamping unit: hydraulic Control: BABYPLAST - touch screen Additional equipment: Production line with robot, rotary table and additional automation Vertical injection molding machine Air valves Injection for mold parting Automatic adjustment of the injection unit setting (up - down) The rotary table is driven by a servo motor controlled by an inverter - very precise Automatic part feeding with quality control system Machine workstation protection with safety package Dimensions: Weight: 350 kg Length/width/height: 0.70x1.00x1.65 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request Dodpfjz Iqfbox Ak Aekw

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Fitotron® Modular Plant Growth Chambers, Type HGC 1014 V, including HQI-T and Krypton Lighting Module Temperature range -10°C - +45°C for temperature testing Test chamber volume approx. 1300 l Simpac Control System Network Connection USB Connection The Fitotron® HGC series plant growth chambers are based on a modular design. Individual modules can be added or replaced as needed. This allows them to be adapted to different applications. They are suitable for plants with high light requirements, such as wheat, corn, cotton, rice, and C4 plants. Lighting HQI-BT-400 W/D and 100 W, Temperature range -10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Fresh air up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% RH approx. 0.8 kW Characteristics for climatic tests with irradiation Temperature range +10°C to +45°C with light on +10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Humidification and dehumidification system, stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm Dksdpfx Aov Ivnzek Ajw External dimensions with lighting module: Height 2450 mm Single door with observation window Interface for computer connection Connection 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition Pipe penetration ∅ 50 mm Air cooling Refrigerant R404A Weight approx. 480 kg + 130 kg lighting module

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Fitotron® Modular Plant Growth Chambers, Type HGC 1014 V, including HQI-T and Krypton Lighting Module Temperature range -10°C - +45°C for temperature testing Test chamber volume approx. 1300 l Simpac Control System Network Connection USB Connection The Fitotron® HGC series plant growth chambers are based on a modular design. Individual modules can be added or replaced as needed. This allows them to be adapted to different applications. They are suitable for plants with high light requirements, such as wheat, corn, cotton, rice, and C4 plants. Lighting HQI-BT-400 W/D and 100 W, Temperature range -10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Fresh air up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% RH approx. 0.8 kW Characteristics for climatic tests with irradiation Temperature range +10°C to +45°C with light on +10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dodpfx Ajv Ivn Uek Askw Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Humidification and dehumidification system, stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Interface for computer connection Connection 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition Pipe penetration ∅ 50 mm Air cooling Refrigerant R404A Weight approx. 480 kg + 130 kg lighting module

Year of construction: 2012, condition: used, volume capacity 1,04 m³/min Endpressure 10 bar Dedpj Agclpofx Ak Ajkw Motor speed 3000 U/min Number of working hours ca. 9.200 h total power requirement 7,5 kW

Condition: used, Year of construction: 2017, operating hours: 12,620 h, functionality: fully functional, machine/vehicle number: Roboter 422504 / Steuerung 315276, overall weight: 230 kg, load capacity: 10 kg, arm reach: 1,420 mm, This is a used and inspected industrial robot KUKA KR 10 R1420 from the Cybertech Nano series, featuring a KR C4 compact controller, manufactured in 2017. The system is engineered for fast and precise automation processes and is typically utilized in assembly, handling, machine loading, and pick-and-place operations. The robot has a payload capacity of 10 kg and a reach of 1420 mm, all within a compact footprint. The inspected condition confirms that the unit is fully functional and ready for immediate use. Dksdpfxsy Nn E Hs Ak Aow

Condition: used, Year of construction: 2017, operating hours: 12,493 h, functionality: fully functional, machine/vehicle number: Roboter: 423030 / Steuerung: 315278, overall weight: 193 kg, load capacity: 10 kg, arm reach: 1,420 mm, The industrial robot from KUKA is a 6-axis automation system with a payload capacity of 10 kg and a reach of 1420 mm. The machine was manufactured in 05/2017 and has 12,493.98 operating hours. The condition is used, fully functional, and tested. The system is equipped with KSS 8.3.31 software, as well as Profinet ProfiSafe Device 3.2.0, RemoteService 1.2.0, and RemoteSupportView 1.0.3. Typical fields of application include material handling, assembly, and general automation processes. Dkedpfxoy Rgb Ae Ak Asw

Condition: used, Year of construction: 2017, operating hours: 12,650 h, functionality: fully functional, machine/vehicle number: Roboter: 02/2017 / Steuerung: 04/2017, overall weight: 230 kg, load capacity: 10 kg, arm reach: 1,420 mm, The industrial robot from KUKA is a 6-axis automation system with a payload of 10 kg and a reach of 1420 mm. The robot was manufactured in 02/2017, the controller in 04/2017, and it has 12,650.92 operating hours. The condition is used and tested. The system is equipped with KSS 8.3.31 software as well as ProfiNet Device 3.2, SafeRangeMonitoring 3.2, and RemoteService 1.2. Typical applications include handling, assembly, and automation processes. Dkedpfx Aey Nn Dpsk Aow

Condition: used, Year of construction: 2017, operating hours: 12,499 h, functionality: fully functional, machine/vehicle number: Roboter 422505 / Steuerung 315279, overall weight: 230 kg, load capacity: 10 kg, arm reach: 1,420 mm, The industrial robot from KUKA is a 6-axis automation system with a payload capacity of 10 kg and a reach of 1420 mm. The robot was manufactured in 02/2017, and the controller in 05/2017, with a total of 12,499.35 operating hours. The unit is used, fully functional, and has been tested. The system features KSS 8.3.31 software as well as ProfiNet Device 3.2, RemoteService 1.2, and RemoteSupportView 1.0. Typical areas of application include material handling, assembly, and automation tasks. Dkodpey Nnzzefx Ak Aow

Condition: used, Year of construction: 2014, machine/vehicle number: 14-427-T10, total height: 1,880 mm, total width: 850 mm, total length: 1,000 mm, Item description Dedpfxjz Szk De Ak Askw Infeed width: approx. 200 mm Roller width: approx. 600 mm Length of the roller conveyor: approx. 900 mm Overall dimensions: approx. 1000 x 850 x 1880 mm

Condition: like new (used), Year of construction: 2018, operating hours: 1 h, functionality: fully functional, machine/vehicle number: Roboter: 512827 / Steuerung: 393646, overall weight: 130 kg, load capacity: 10 kg, arm reach: 1,101 mm, The industrial robot from KUKA is a 6-axis automation system with a payload capacity of 10 kg and a reach of 1101 mm. The robot was manufactured in 10/2018, the controller in 09/2018, and it has 0.93 operating hours. The condition is used but like new. The system is equipped with KSS 8.3.38 software as well as SafeOperation 3.2, mxAutomation 2.1, Profinet KRC-Nexxt 3.3, DiagnoseSafety 2.1, and PLC ProConOS 4.1. Typical application areas include handling, assembly, and automation processes. Dodpfjy Ntidox Ak Ajkw

Year of construction: 2020, condition: excellent (used), Stationary Piston Compressor Aircraft AIRPROFI 703/270/10 V Used: Year of manufacture 2020 - Top condition - Stationary compressors with a vertical 270 l tank offer maximum performance in a compact space. Robust design and best quality Fully automatic on/off operation Equipped with all safety devices Completely ready for connection Fifteen-year guarantee against rust on the internally and externally hot-dip galvanized compressed air tank Quality electric motor High-quality electric motor with high starting torque is equipped with a motor protection switch Starting capacitor and starting relief valve ensure easy starting Standard equipped with a phase inverter for easy manual reversal of the direction of rotation Compressed air compression via high-performance HOS unit Dkedez Rq Eujpfx Ak Asw The starting relief valve ensures easy, pressure-free starting The two-cylinder high-performance unit made of gray cast iron and the low speed guarantee particularly quiet and low-vibration operation; this ensures a long service life due to minimized wear Optimal lubrication of the compressor for high service life and reliability Equipped with a high-quality intake filter Aftercooler with large cooling fins results in a low tank inlet temperature and less moisture in the compressed air to protect the compressed air tools Additionally with an intercooler to the aftercooler Corrosion-resistant valve plates for improved heat dissipation and longer service life of the compressor Optimal cooling of the compressor by a large fan wheel and a cooling air deflector on the cylinder Stable metal belt guard for optimal protection of the components and for high user safety No vibration breaks in the compressed air supply line to the tank due to flexible armored hose with heat protection High-quality drive belt Powerful and efficient drive The toothed drive belt facilitates starting, improves running smoothness and power transmission, and reduces power consumption by up to 30% Stable metal belt guard Operation on the service block Equipped with a high-quality CONDOR pressure switch with a robust push-button function for fully automatic on/off operation Air outlet on the service block via a comfortable safety quick coupling Only fixed screw connections on the service block, no hose connections High-quality tank with permanent rust protection Air outlet ¾" Length (product) approx. 780 mm Width/Depth (product) approx. 680 mm Height (product) approx. 1870 mm Weight (net) approx. 152 kg Automatic pressure switch CONDOR Drive transmission V-belt, toothed Material of compressed air line Flexible armored hose with heat protection Compressed air outlet Ball valve Condensate drain Condensate drain valve Compressed air tank Internally and externally hot-dip galvanized with a fifteen-year guarantee AD 2000 compliant yes Tank base Vibration dampers Connection plug 400V CEE plug with phase inverter Connection voltage 400 V Mains frequency 50 Hz Output power 4 kW Input power 4.81 kW Sound pressure level Lp 83 dB(A) Explanation of sound pressure level Sound pressure level at a distance of 1 m according to DIN 45635 T 13 Compressor system HOS Intake capacity approx. 650 l/min Filling capacity approx. 520 l/min Explanation of filling capacity at 6 bar working pressure Number of cylinders 2 Number of compression stages 2 Compressor speed 950 min¯¹ Maximum pressure 10 bar Tank capacity 270 l Location: available from stock in 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2016, ABB IRB4400L-10 + IRC5 controller + TPU-Low DTC DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, with a comprehensive service area for robot maintenance and repair. Over the years, we have evolved into a comprehensive partner for all matters related to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc. Dedpfxsz Tadxo Ak Askw

Condition: like new (used), Year of construction: 2024, Special price, used for 1/2 year, as new, with warranty Djdpfxewt A Nzo Ak Ajkw Self-centering complete set, dual drive, synchronous with hand remote control, digital display, and foot control Diameter from 300 mm to 3500 mm Drive roller diameter 300 mm Dimensions: length: 1900 mm x width: 470 mm x height: 390 mm Continuously adjustable speed 200 – 1200 mm/min. Motor AC 380 V

Condition: like new (used), Year of construction: 2018, operating hours: 13 h, functionality: fully functional, machine/vehicle number: Roboter 512829 / Steuerung 393648, overall weight: 125 kg, load capacity: 10 kg, arm reach: 1,101 mm, This is a used and fully equipped KUKA KR 10 R1100 sixx industrial robot from the AGILUS series, featuring a KR C4 compact controller from 2018. The system is engineered for high-speed pick-and-place, assembly, and handling tasks in industrial automation. With a 10 kg payload and a reach of 1101 mm, the robot is ideal for compact production cells with high cycle rates. The installed parallel gripper further expands its application range for direct handling operations. Dedpfoy Ntc Rex Ak Askw

Condition: like new (used), Year of construction: 2025, load capacity: 10,000 kg, Special price, used for 1/2 year, as new, with warranty Self-centering complete set, dual drive, synchronous with hand remote control, digital display, and foot control Diameter from 300 mm to 3500 mm Drive roller diameter 300 mm Dimensions: length: 1900 mm x width: 470 mm x height: 390 mm Continuously adjustable speed 200 – 1200 mm/min. Motor AC 380 V Dkedew D Rhaepfx Ak Asw

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 600 mm, number of axes: 3, This ZEISS CONTURA 10/16/6 G2 HTG Gold XT was manufactured in 2018. It features impressive travel ranges of 1000 mm in X, 1600 mm in Y, and 600 mm in Z. The machine is equipped with a ZEISS VAST XT Gold Scanning Sensor, allowing for active scanning with long stylus systems. If you are looking to get high-quality measurement capabilities, consider the ZEISS CONTURA 10/16/6 G2 HTG Gold XT CMM machine we have for sale. Contact us for further details. Djdpfo Ahpngsx Ak Aokw - Tool / Stylus Rack Capacity: 7 slots (7-fach Tastermagazin / Werkzeugplätze) - Sensor System: ZEISS VAST XT Gold active scanning sensor (probe configurations with styli up to 500 mm) - Options / Packages: HTG (High Temperature Gradient) package for extended operating temperature range (18–26 °C) - Software: ZEISS CALYPSO Software - Voltage: 1/N/PE 100-240V~ - Frequency: 50...60 Hz - Power: 0.8 kVA / max. 800 VA - Machine Weight: approx. 2.8 t (~2,800 kg) - Included Components: Coordinate measuring machine, 7-slot stylus changer rack, ZEISS CALYPSO software, operator PC (Bedienrechner), machine documentation - Accessories: Measuring probes and existing adapters/holders available upon agreement

Condition: used, functionality: fully functional, fuel type: diesel, fuel: diesel, gearing type: mechanical, suspension: steel, total length: 5,920 mm, total width: 2,250 mm, total height: 500 mm, IVECO DAILY 35C 10 2.8 TDI, three-sided tipper truck – Engine capacity: 2800 cc – Horsepower: 100 hp – Power: 76 kW – Payload: 900 kg – Internal length: 3480 mm – Width: 2140 mm – Side height: 500 mm – Electric windows – For further information, contact Davide: 3355266031. Djdpfxs Ah T Tco Ak Aekw

Condition: excellent (used), CATALOG NUMBER 8143 Technical data: Circular saw: - max. saw blade diameter 300mm - adjustable blade, front/rear - motor approx. 3.4kW Djdj Ah E Nkjpfx Ak Ajkw - dust extraction port diameter 70mm Router: - spindle: - spindle diameter 40mm - spindle working height 180mm - locked spindle - motor 11kW - 2 types of rotational speeds 4000, 6000 rpm - electric saw brake - pneumatic material clamping on the carriage, 2 pcs from above and 2 pcs from the side - side carriage adjustable up/down, front/rear and at an angle - retractable support from the table - angle ruler - electric carriage feed - dust extraction port diameter 190mm - dimensions length/width/height 2950mm x 1700x 1630mm – weight 920kg ADVANTAGES - Polish production - electric carriage feed - upper control panel - used router, very good condition Net price: 17,900 PLN Net price: 4,163 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, operating hours: 780 h, load capacity: 200 kg, empty load weight: 2,735 kg, construction height: 10,000 mm, fuel type: electric, 2x HAULOTTE STAR 10 Telescopic Boom Lift Year of manufacture: 2014 Red boom lift, meter reading: 780 hours Yellow boom lift, meter reading: 75 hours 🏗️ Performance Data & Working Range • Working height: Max. 10.00 m • Platform height: Max. 8.00 m • Lateral reach: 3.00 m • Platform load capacity: 200 kg (approved for 2 people indoors / 1 person outdoors) • Turret swivel range: 345° • Tilt angle (boom arm/jib): 130° (+70° / -60°) 📐 Dimensions & Weight • Overall length (transport length): 2.70 m • Overall width (transport width): 1.00 m • Height in retracted position: 1.99 m • Platform size (length x width): 0.98 m x 0.78 m • Wheelbase: 1.20 m • Ground clearance: 10 cm (retracted) / 2.5 cm (extended with tilt protection) • Total weight (unladen weight): approx. 2,735 kg to 2,760 kg (depending on the specific equipment variant) ⚡ Drive, Battery & Driving Characteristics • Drive type: Electric via 24 V brushless AC motors • Battery: 24 V – 250 Ah traction batteries • Travel speed: 0.6 km/h to 5.0 km/h (proportionally adjustable) Dkodpfo Agwxljx Ak Ajw • Maximum gradeability: 25 % • Turning radius (outside): 1.88 m • Tires: Non-marking solid rubber tires 🛠️ Standard Equipment (2016 model) • Integrated Haulotte Activ'Screen diagnostic system directly on the boom lift • Central battery filling system • Forklift pockets on the undercarriage for easy transport • Emergency lowering hand pump and mechanical brake release Selling price: €5,950.00 net per unit! Upon request: new Austrian inspection certificate before delivery! Affordable delivery also possible!

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 1,600 mm, travel distance Y-axis: 2,400 mm, travel distance Z-axis: 1,000 mm, overall weight: 11,000 kg, number of axes: 3, This 3-axis ZEISS ACCURA 16/24/10 3D CMM was manufactured in 2022. It features a measuring range of 1,600 mm in the X-axis, 2,400 mm in the Y-axis, and 1,000 mm in the Z-axis, with a maximum workpiece weight capacity of 4,000 kg. Equipped with the ZEISS VAST Scanning Head, it offers high-speed data acquisition and sub-micron accuracy. If you are looking to get high-quality measurement capabilities, consider the ZEISS ACCURA 16/24/10 machine we have for sale. Contact us for further details. • Maximum workpiece weight: 4,000 kg • Equipped with: ZEISS VAST scanning head • Sensor capability: Active scanning for high-speed data acquisition; sub-micron accuracy for complex geometries, bores, and deep features Djdpfxs Ad Nxre Ak Aokw • Service/Certification: Maintained and calibrated annually by original ZEISS service technicians; accuracy documented and certified to international standards