Used Vacuum Metallizer for sale (38,042)

Condition: good (used), Year of construction: 2013, IFP Europe KP 50 HMA Basic Vacuum Parts Washer Mfd. 2013 S/N: 201305-00974 Specifications: Number of Baskets per Wash Cycle 1 Basket Size 11.9″ x 7.9″ x 17.7″ Machine Dimensions 70″ x 103″ x 70″ Chiller Size 5 ton Solvent Capacity 106 Gallon Wash Cycles Per Hour 4 to 8 Chamber “Max. Load Weight” 110 lbs Machine Weight 4,000 lbs Equipped With: Rotos & Vane Pumps, Liquid Ring Tank, Rust Inhibitor Tank Filter, Waste Oil Separator, Siemens Touch Screen Control, Budzar BWA-AC-05-FCB-12-0-000 5-HP Chiller, Safety Guarding, Light Curtains, Ljdpfjx Ddc Ijx Agzeak Automatic Door, (3) Wash Settings, Rust/Vap/Mist/Vac/Oscillation Settings, 100-Lb. Batch Weight Repairs necessary: Pumps C301.00020 DVP LC106 Vane Pump — $5,500.00 C301.00078 Liquid Ring Pump — $3,561.55 C301.00081 RBS 45 Rotary Lobe Pump — $13,500.00 Pump Subtotal: $22,561.55 Accessories / Pipes for Conversion A508.00031 — $287.50 A508.00012 — $287.50 A508.00013 — $345.00 Accessories Subtotal: $920.00 Grand Total $23,481.55

Condition: used, machine/vehicle number: YV2J1F1C9BA70xxxx, mileage: 139,917 km, Year of construction: 2011, Please contact ATS Norway for more information Please provide reference number upon request: 22065 Specifications: 2011 model 139,917 km Manual transmission Euro 5 6x2 419 hp Tank volume:10,000 liters Remote control Approximately 6600 pump hours Errors and omissions may occur. Error codes in the display (see pictures) Supersucker Lodpfxsx Ip Sfj Agzsak Disabled building Hydraulic opening when emptying Tires (see pictures) Front suspension: steel Rear spring: air Air conditioning/ac Radio Light Ready for delivery   Description: We have a 2011 Volvo FM 6x2 super suction w/ Disab p build for sale. The car has error codes on the display. There are errors on, among other things, the engine cooling valve. But the engine starts and runs. The structure functions as it should, but is worn after many years of operation. Errors and defects may occur and some cost is calculated. All services have been taken care of by the owner in his own workshop. Ready for delivery. Km: 139917 HK: 418 Technical approved: Yes EU-approved until: 18.08.2026 Own weight: 20900 Euro: 5 Model: FM Gearbox: Manual

Condition: used, Used Calmic Eurovent 316 stainless steel vacuum shelf dryer. Calmic Eurovent is a leading manufacturer of drying equipment. This unit has an approximately 0.75sqmt drying area. Has (3) 500mm wide x 500mm deep x 160mm high individual drying compartments. Unit includes hot oil recirculation system and (1) Leybold vacuum pump. Unit includes electrical cabinet and separate control cabinet. Main unit is mounted on a mild steel frame. Lsdsx Hv Iwspfx Agzeak

Condition: good (used), Laska KU 45 VKAB bowl cutter with cooking and vacuum options. Has come from a pilot plant in a major food company so has not been used very much. Complete contents of pilot plant also available. Lodpfx Agex Ilqdezoak

Condition: good (used), Vacuum pump, rotary vane pump, rotary vane vacuum pump -Manufacturer: Gast, rotary vane vacuum pump type 1550-V2A -Vacuum: measured -0.7 bar -Overall dimensions: 600/250/H385 mm Lsdpfxjig A Ado Agzjak -Weight: 30 kg

Condition: used, loading : max. 2000 to 2200 kg (depending on the product) all stainless steel vacuum pump not included Lutetia control adjustable speed tilting system to discharge Lsdpfx Aox Ir D Djgzeak 1 water filter dimensions (l x w x h) : ± 3.600 x 1.550 x 1.990 mm

Year of construction: 2017, condition: used, Used Battery-Powered Vacuum Lifter Year of manufacture: 2021 The Mobylift TC is specially designed for furniture manufacturers and interior fitters to lift panels from a stack or remove them from a rack and place them onto a table saw, upright or horizontal panel saw, or CNC machine. It is easy to operate, reduces the number of damaged products, increases productivity, prevents back issues, and thus reduces potential work absences due to illness. The chassis comprises a frame carrying the counterweights, the 24 V AGM battery system, and the lifting arm of the electric lifting and tilting system. The automatic vacuum unit is mounted on the jib arm. A rotating and swiveling head allows the vacuum unit to be manually rotated and swiveled into various positions. This head is equipped with a quick-lock system that allows both rotation and swiveling to be locked so that products do not need additional securing during transport. The automatic vacuum device consists of a frame and extendable arms equipped with six robust suction cups. Lasdpox Nkukefx Agzjk The vacuum system maintains its pressure automatically once activated. The electric lifting and tilting system can be operated using the wireless remote control. Suitable for both non-porous and porous materials (e.g., raw and coated chipboard, MDF, OSB, etc.). Max. panel size: 2100 x 3200 mm Overall height: approx. 2050 mm Max. load capacity: 120 kg Max. lifting height: 1600 mm Tilting angle front/back: 100° Swivel angle on both sides: 90° Rotation angle: 360° Width: 830 mm Weight: 175 kg Electrical lifting and lowering Electrical tilting Manual rotation Manual swiveling Shipping dimensions: approx. 2500 x 830 x 2050 mm Shipping weight: 220 kg Availability: short-term Location: Flörsheim

Condition: used, machine/vehicle number: YV2AG30G3AA70xxxx, mileage: 203,607 km, Year of construction: 2011, Please contact ATS Norway for more information Please provide reference number upon request: 21178 Specifications: Model year: 2011 Mileage: 203,607 km Euro 5 Lsdpfsw Sc Rhsx Agzoak I-Shift automatic gearbox Power: 510 hp Driveline: 8x4 Tires: See pictures Superstructure: 2010 Inter Consult Vacuum and jetting unit Hose reel Hydraulic boom Acid-resistant tank Steering rear (4th) axle Tank compartments: Compartment 1: 5,000 liters Compartment 2: 10,000 liters Compartment 3: 3,000 liters Valid ADR (missing annual inspection) Front suspension: Steel Rear suspension: Air Air conditioning Radio Work lights Ready for delivery Description:2011 Volvo FH500 8x4 vacuum truck with 2010 Inter Consult body.Equipped with suction and high-pressure system, hydraulic boom, and acid-resistant tank.ADR approved but lacks the latest annual check.All systems are reported to work as they should.Service has been performed regularly by the owner. Km: 203607 HK: 509 Technical approved: Yes EU-approved until: 05.09.2026 Own weight: 20970 Total Weight: 37500 Payload: 16455 Width: 255 Length: 1074 Euro: 5 Model: fh500 8x4 Slamsuger m/ 2010 Inter consult påbygg Gearbox: Automatic

Condition: used, mileage: 699,883 km, power: 338 kW (459.55 HP), first registration: 01/2004, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: mechanical, emission class: euro3, total width: 2,550 mm, total height: 3,650 mm, loading space volume: 13 m³, Equipment: ABS, MÜLLER-FATMASTER suction structure for sludge etc. for the disposal of residues from grease separators, capacity 13,000 liters, swiveling suction hose reel, "WEBASTO" heating, "WITTING" suction pressure air pump type RFW 150, flow rate: 1180 m³/h, power: 37 KW, "SPECK" high pressure pump type: P 45/85-120, power 110/70 bar/ltr/min, "VOGELSANG" rotary piston pump type: V 100-450, max. power: 20 m³/h, "REXROTH" oil pump type: A10VO100, max. power: 160/117.5 bar/ltr/min, equipped with a macerator for solid material shredding, control cabinet, auxiliary drive, ABS, differential lock rear, engine brake, starting aid, Cruise control, driver comfort suspension seat, heated and electrically adjustable exterior mirrors, roof hatch, fog lights, 2 x rotating beacons, 2nd and 4th steerable axle(s), lift axle, air suspension with lifting and lowering device rear axle, vehicle can be covered with advertising and/or labeled Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. Laedevnndbopfx Agzjk We would be happy to make you a financing or leasing offer for this object. Please contact us!

Condition: good (used), mileage: 225,500 km, power: 286 kW (388.85 HP), first registration: 01/2008, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x2, wheelbase: 4,300 mm, fuel: diesel, color: yellow, driver cabin: day cab, gearing type: semi-automatic, emission class: euro5, suspension: steel-air, loading space volume: 16 m³, Year of construction: 2008, Equipment: AdBlue, crane, = Additional Options and Accessories = - PTO (Power Take-Off) = Remarks = Volvo FM380, 6x2*4, 16 m³ sludge and high-pressure truck with crane, first registration: 2008 Further information: Engine: 380 HP Transmission: I-Shift Suspension: leaf spring Mileage: 225,500 km Wheelbase: 4,300 mm Emissions standard: Euro 5 First registration: 23.01.2008 Year of manufacture: 2007 Electric windows and mirrors Air conditioning Reversing camera Webasto cab heater and pump compartment heating, engine pre-heating No warning messages! Last service at 222,500 km (08.10.2025) Last technical inspection at 218,700 km (02.04.2025) Tachograph recently inspected: 08.10.2025 The truck is in good and fully operational condition, with no active faults/warnings present. Superstructure: Korp&Son 16 m³ with 2 remote controls, sludge suction and high-pressure flushing unit with stainless steel floor and tipping device. Compartment (1): 8 m³ for high-pressure flushing water. Compartment (2): 8 m³ for sludge. Water pump: URACA with 1-inch high-pressure hose and ½-inch high-pressure hose. Vacuum pump: Moro model PM200, 930 m³/h, pressure 0.9 bar, vacuum -0.9 bar; all in flawless and fully operational condition! All components serviced in October 2025. Front tyre tread depth: 70% Rear tyre tread depth: 70% Price: €, Stockholm, Sweden Laodpfx Agjx Iv Rzezjk = Further Information = Front axle: Tyre size: 385/65R22.5; Max. axle load: 9,000 kg; Steered; Left tyre tread: 70%; Right tyre tread: 70%; Suspension: leaf spring Rear axle 1: Tyre size: 315/80R22.5; Double tyres; Max. axle load: 11,500 kg; Left inner tread: 70%; Left outer tread: 70%; Right inner tread: 70%; Right outer tread: 70%; Suspension: air suspension Rear axle 2: Tyre size: 385/65R22.5; Lift axle; Max. axle load: 7,500 kg; Steered; Left tread: 70%; Right tread: 70%; Suspension: air suspension Crane: Year of manufacture 2007 APK (General Technical Inspection): valid until 03.2026 Technical condition: good Visual condition: good

Condition: good (used), Vacuum pump, rotary vane pump -Drive: 1.6 kW -Flow rate: m³/h -Max. pressure: mbar -Speed: 2850 rpm -Inlet: Ø 43 mm -Outlet: Ø 43 mm -Price: per piece -Quantity: 1 available -Dimensions: 360/220/H215 mm -Weight: 20 kg Lodpfx Aod E Tx Eogzjak

Condition: excellent (used), Catalogue no.: 7815 Ljdexwygcopfx Agzsak TECHNICAL DATA Worktable dimensions (L/W): 2900x1200mm Overall table dimensions: 3000x1300mm Operating temperature: ±40-60°C Maximum temperature: ±60°C Total machine power: 5.25kW Vacuum pump power: 0.90kW Vacuum pump capacity: approx. 25/30m3/h Noise level: approx. 70dB Dimensions (L/W/H): 3060x1400x1400mm Weight: 360kg – DTR Documentation – Unpainted – Very good condition – Used press Net price: 21,900 PLN Net price: 5,200 EUR depending on the exchange rate of 4.2 EUR (Prices may change with higher fluctuations)

Condition: used, Year of construction: 2014, Speed: 1450 rpm Motor: 2.4 kW Suction capacity / Flow rate: 70 m³/h Suction pressure: 3 mbar Tank: Operating pressure: 0.99 bar Capacity / Liters: 90 Operating temperature: 50°C Year of manufacture: 1989 No. 400 100 Storage location: Supplier Lsdpfevvi Nnox Agzsak

Condition: used, mileage: 4,000 km, Year of construction: 2025, Serial number: YS2G8X4000217xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21046 Chassis Specifications: Model: Scania G 500 B8x4*4NB Engine: DC13 165 Euro 6, 500 hp / 2550 Nm, XPI injection and SCR exhaust after-treatment Gearbox: GRSO905R, 12-speed with range/split, crawler gear, overdrive and retarder Gearbox Control: Opticruise automatic gear shifting (Standard, Power, Off-road programs) Chassis number: YS2G8X40002175173 Dimensions: Length 10,155 mm, width 2,540 mm Wheelbase: 4,150 mm Gross Weight: 38,000 kg, payload 15,725 kg Suspension: Air suspension on all axles Rear Axle: RBP735 + RP735 with hub reduction, ratio 4.05:1 Power Take-Off (PTO): ED120P engine-mounted for hydraulic pump EG662F gearbox-mounted (rear) EK730P flywheel-mounted (position 12 o’clock, 1:1 ratio) Cabin: CG17N Medium sleeper cab with air suspensionAir Conditioning: Automatic climate controlBrakes: EBS with disc brakes on all axles, retarder (3500 Nm)ADR Approval: Types FL and EX/IIIFuel Tank: 350 litres aluminium (left side)AdBlue Tank: 80 litres (60 litres usable) Body Specifications: Type: Rigual CL3644D Vacuum and Jetting Combination Truck Tank Material: Stainless steel Capacity: Total 18,000 litres Main tank divided into: 10,000 + 3,000 litres for sludge 5,000 litres clean water in stainless side tanks Vacuum Pump: HIBON VTB 820 XL lobe pump Vacuum capacity: -0.9 bar, 2674 m³/hour High-Pressure Pump: URACA P3-45 Working pressure: 10–200 bar, automatic regulation Hose Reel (rear hatch): Two-part reel Large side: 150 m x 1" diameter hose Small side: 70 m x ½" diameter hose Laodpsw Ia Icsfx Agzjk

Condition: new, Vacuum lifter BARBARIC B3 swiveling, incl. crane - Exhibition unit - Including: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg Vertical and horizontal transportation of flat commercial commercially available boards (coated boards, natural wood panels) up to a panel size of 3,000 x 2,100 mm - a tilting range of 90° with pneumatic tilting mechanism - Complete with hoist and corresponding safety devices safety devices (vacuum manometer and manual manual slide valve with mechanical safety device) - uniWood traverse with 2 suction pads Ø 270 mm on an adjustable traverse (traverse length: 1,500 mm) Includes: - Optional reinforced BARBARIC uniWood version for easily permeable boards Load capacity: 250 kg with 2 oval suction pads 500 x 250 mm on an adjustable cross beam (cross beam length: 1,250 mm) and reinforced vacuum pump for permeable sheets. The reinforced design enables lifting materials weighing up to 250 kg. Includes: - BARBARIC uniWood comfort operation option All controls for the lifting gear and for the vacuum the vacuum lifter are integrated in one control unit - our special handling handle is accommodated. This makes it possible to operate the system and guiding the load in one-handed operation. The lifting process can be steplessly controlled by a frequency converter. Lsdpfx Aeu R Szajgzoak The comfort version comes complete with hoist and corresponding safety devices (vacuum pressure gauge and 2-button safety control for releasing the load). Includes: - BARBARIC column-mounted slewing jib crane Lifting capacity on the lifting device: 250 kg The lifting capacity is the specified working load on the lifting device. Barbaric slewing jib cranes are designed for handling tasks in all areas of application and are extremely lightweight. SSK consisting of column, bracket and smooth-running jib. jib. Slewing and trolley travel by hand. The prerequisite for attachment is a suitably concrete floor (C20/R5, min. 20 cm). The static inspection of the floor must be carried out on site and documented accordingly. For fastening on cracked concrete or less load-bearing substrate, we offer enlarged base plates enlarged base plates on request. Fastening: Supplied with adhesive anchor for concrete floor When ordering without lifting gear, please specify the cable or hose type! Delivery includes: incl. sliding trolley, power supply and compressed air connection. - new exhibition machine -

Condition: used, tank capacity: 22 l, GENERAL Design: upright Speed: 32 - 150 rpm Heating/Cooling: available Power: 0.37 kW Max. permissible operating temperature: 120 °C Max. permissible operating overpressure: 4.0 bar Agitator: anchor agitator Agitators: 2 agitators Agitator element: homogenizer Mounting type: frame Location: Bremen Nameplate: Vacuum: 1.0 bar Volume: 22 liters Double jacket volume: 2.0 liters Condition: used Last application: cosmetics VESSEL Lodpfsxqbb Iex Agzeak Max. permissible operating temperature: 99 °C Bottom: conical bottom AGITATOR 2 Agitator configuration: bottom-mounted AGITATOR 1 Voltage: 380 volts Agitator configuration: central, top-mounted Agitator equipment: anchor agitator with Teflon scrapers; the drive power of 7.5 kW indicated on the nameplate presumably refers to the homogenizer.

Condition: good (used), Year of construction: 1987, Vacuum pump, rotary vane pump -Manufacturer: Becker, vacuum pump type VT 3.40 -Drive: Dietz 1.25 kW / 1430 rpm Lasdpfst E D Efsx Agzsk -Volume flow: 40 m³/h -Suction pressure: -900 mbar -Dimensions: 420/190/H285mm -Weight: 38 kg

Condition: used, Year of construction: 1995, Storage location: Supplier Lajdpfevvi Siox Agzok

Condition: good (used), Vacuum pump, rotary vane pump -Drive: 2.2 kW -Flow rate: 100 m³/h -max. vacuum: mbar Laodjb Imxuepfx Agzok -Speed: 1400 rpm -Dimensions: 700/430/H620 mm -Weight: 85 kg

Condition: good (used), Year of construction: 1987, Vacuum pump, rotary vane pump -Manufacturer: Becker, vacuum pump type VT 3.10 -Drive: 0.37 kW / 1420 rpm -Volume flow: 10 m³/h -Suction pressure: -850 mbar -Dimensions: 420/190/H285mm -Weight: 15 kg Lajdpfx Agjt E D Dzszsk

Condition: good (used), Year of construction: 1992, Compressed air tank, pressure vessel, pressure tank, compressed air vessel, pressure vessel, compressor tank, compressed air tank -Manufacturer: Zeidler & Uhl, vacuum container standing, galvanized -Contents: 455 L Laodpfxewra H Io Agzek -Operating pressure: -0.6 bar / max. 16 bar -Accessories: including attachments see photos -Number: 2x containers available -Price: per piece -Dimensions: 860/650/H1610 mm -Weight: 374 kg/piece

Condition: good (used), Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuums, floor vacuums, safety industrial vacuums, wet/dry vacuums, liquid and chip vacuums, water vacuums, wet vacuums -Manufacturer: Wap, Industrial vacuum cleaner, 2-motor wet/dry vacuum cleaner -Type: turbo M2 -Connection: 220...240 volts -Power: 1400...1600 W -Dimensions: 700/600/H1070 mm -Weight: 30 kg Lajdpfx Agsx I A Dhezok

Condition: good (used), Vacuum pump, rotary vane pump Laedpfxscilmdj Agzjk -Manufacturer: Becker, vacuum pump type U 2.70 SB -Drive: 1.5 kW -Volume flow: 70 m³/h -max pressure: 20 mbar -Speed: 1420 rpm -Number: 3x pumps available -Price per piece -Dimensions: 640/380/H440mm / 760/360/H425mm -Weight: 60 kg/pc.

Condition: good (used), vacuum pump -Drive: 5.5 kW -Speed: 1400 rpm -Intake volume: 160 m³/h -Weight: 240 kg Ledpfxeb A Nf Rj Agzeak

Condition: good (used), Year of construction: 2006, Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuums -Connection: 220 volts -Stainless steel container (not a wet vacuum cleaner) -Power: 1400 watts Ledpeh Db E Hofx Agzsak -Weight: 25 kg