Used Vacuum Pump for sale (10,583)

Condition: ready for operation (used), Year of construction: 2022, Technical Data: Product Number MM 1102 B V03 Year of Manufacture 2022 Motor Power 4 kW Capacity 135 m3/h Maximum Vacuum 60 mbar Noise Level 74 dB Rotational Speed 1500 rpm Weight 200 kg Dimensions [H x L x W] 1011 x 581 x 410 mm The pump achieves a vacuum of 60 mbar, as confirmed by the sensor measurement in the video attached below. Warehouse storage, pump used only a few times for testing purposes. The pump is in perfect condition. New oil New oil filter Oil-lubricated vacuum pump, suction pump – a device used in technology for removing gases (creating a vacuum) in a closed space. Pumps are categorized based on their operating principle into: displacement, jet, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ion pumps. Rbjdpsxzvwljfx Abmjt The most important parameters of vacuum pumps are: the ultimate pressure (the lowest pressure achievable by the pump), pumping speed and its dependency on pressure, capacity (usually measured in m3 of gas pumped per unit time).

Condition: good (used), Year of construction: 2005, Vacuum Pump Manufacturer: Becker Type: VTLF 250 Year of manufacture: 2005 Volume flow: 250 m³/h Vacuum: 200 mbar Power: 5.5 kW Rbsdpfx Abowx Hzromst

Condition: excellent (used), Vacuum pump Pfeiffer Rbjdpfowtcr Asx Abmet (28648) Type UNO 012A Suction capacity 12 m3/h 220 Volt 0.55 kW Length 490 mm Width 220 mm Height 260 mm

Condition: excellent (used), Vacuum clamping system Rbsdpfewbdftox Abmjt Vacuum pump Manufacturer: BRIWATEC Type: Zirkon DO25V 25 m3/h 220 volts 0.75 kW Year of manufacture: 2010 1 vacuum distributor with pressure gauge 4 vacuum clamping plates Length: 425 mm Width: 295 mm Thickness: 40 mm

Condition: used, Vacuum pump Redpfx Asw I U Tasbmjbt used for Homag/Weeke current supplier: Nash Elmo function-tested Motor 3.85 kW Minimum suction pressure 30 mbar Speed 3850 rpm with enclosure Availability: short-term Location: Flörsheim

Condition: good (used), Skid mounted Busch 630 vacuum pump in very nice condition. Direct from food factory. Rjdpfx Aoptbi Dsbmobt

Condition: excellent (used), Year of construction: 2004, Lovely Busch RA 0630 vacuum pump which has just come out of a closed factory. Mounted on its own stainless platform and has a control panel fitted. Looks much newer than 2004. Rbjdpfxoi Exf As Abmet

Condition: refurbished (used), The vacuum pump will undergo a complete overhaul upon order placement and will then be ready for operation. We recommend that installation is carried out only by trained personnel. Adaptation material is available upon request. Oil fill: M-VAC 150 Delivery time: approx. 5 weeks Technical Data: Dry claw vacuum pumps Motor rated power: 5.5/6.5 kW (50/60 Hz) Rjdpfx Aext Ephjbmsbt Motor nominal speed: 2900/3500 rpm (50/60 Hz) Ultimate pressure: 150 hPa (mbar) (50/60 Hz) Continuous operation ultimate pressure: 150 hPa (mbar) (50/60 Hz) Rated pumping speed: 290/345 m³/h (50/60 Hz) The filter shown in the pictures is not included in the scope of delivery, but can be ordered as an option. Subject to prior sale! This offer is valid only for customers within Germany and other European countries!

Condition: like new (used), Unused KSB Etanorm G065-200 Rsdpfxsxw Nw Ro Abmebt

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 3537961, overall weight: 500 kg, total length: 172 mm, total width: 124 mm, total height: 96 mm, input voltage: 230,460 V, input frequency: 60 Hz, Our company bought this machine new, and it has been stored in perfect condition for a year. We do not need the machine, and thus are selling it. Rbsdpfx Abexqphcsmjt

Condition: like new (used), Year of construction: 2018, Technical data: Product number: VWP 1000 Year of manufacture: 2018 Capacity: 1000 m3/h Max vacuum: 0.4 mbar More information available upon phone contact Rbodpfx Aexdvpmobmjt The booster pump must operate together with an oil pump with 2-3 times lower capacity The unit has undergone complete servicing and is ready for operation New seals and bearings, new oil Achieves a vacuum of 0.4 mbar

Condition: ready for operation (used), Technical details: Redpfexdvptsx Abmjbt Product number PANDA WV 500 Capacity: 500 m3/h Max vacuum: 0.1 mbar The booster pump must work together with an oil pump of 2-3 times lower capacity. The unit has undergone a complete overhaul and is ready for operation. New seals and bearings, new oil. Achieves a vacuum of 0.1 mbar.

Condition: ready for operation (used), Year of construction: 2016, Technical data: Product number WV 1500 B 001 Year of manufacture 2016 Capacity 1500 m3/h Max vacuum 0.4 mbar The booster pump must operate together with an oil pump having 2-3 times lower capacity. Device after complete overhaul, ready for operation New seals and bearings, new oil Achieves vacuum of 0.4 mbar Rbodpfxoxdvqws Abmet

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, overall weight: 250 kg, Technical data: Product number WV 1500 B 001 Rjdpfx Aewtd Npebmjbt Year of production 2010 Efficiency 1500 m3/h MAX vacuum 0.4 mbar Booster pump must work together with an oil pump with 2-3 times lower efficiency Device after major service, ready to work New seals and bearings, New oil Reaches a vacuum of 0.4 mbar

Condition: ready for operation (used), Year of construction: 2008, Technical data: Product number: RA 0305 D Year of manufacture: 2008 Motor power: 7.5 kW Capacity: 300 m³/h Rbedpoxdvpyofx Abmjt Max vacuum: 0.4 mbar Noise level: 74 dB Rotational speed: 1,500 rpm Weight: 250 kg Dimensions [H x L x W]: 1011 x 581 x 410 mm The pump achieves a vacuum of 0.4 mbar, as confirmed by the measurement on the sensor shown in the video below. The reading 4.3 -1 on the sensor display indicates a vacuum of 4.3 × 10⁻¹, which equals 0.43 mbar. After a complete overhaul The pump is in perfect condition. New oil New oil filter New exhaust separators Oil-lubricated vacuum pump, suction pump – a device used in engineering applications for extracting gases (creating negative pressure) in a sealed space. Pumps are categorized by their operating principle: positive displacement, jet, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ionic. The most important parameters of vacuum pumps are: • Final pressure (the lowest pressure attainable with the pump) • Pumping speed and the dependence of this speed on pressure • Throughput (typically measured in m³ of extracted gas per unit of time)

Condition: ready for operation (used), Year of construction: 2009, Technical data: Product number: WV 1500 C 001 Year of manufacture: 2009 Capacity: 1500 m3/h Maximum vacuum: 0.4 mbar The booster pump must operate together with an oil-sealed pump with 2-3 times lower capacity. Rbodpfxsxdvuij Abmet Device after major overhaul, ready for operation. New seals and bearings, new oil. Achieves vacuum of 0.4 mbar.

Condition: ready for operation (used), Year of construction: 2012, Technical Data: Product number CB 0250 B 003 Rodow Ha N Eepfx Abmobt Year of manufacture 2012 Motor power 7.5 kW Capacity 250 m3/h Max vacuum 0.3 mbar Noise level 74 dB Rotational speed 1500 rpm Weight 250 kg Dimensions [H x L x W] 1011 x 581 x 410 mm The pump achieves a vacuum of 0.3 mbar on the large section and 2.1 mbar on the small section. The pump is in perfect condition after a complete overhaul. New bearings, seals, separators, oil filter, and oil. Oil-lubricated vacuum pump, suction unit – a device used in technology for removing gases (creating a vacuum) in an enclosed space. Pumps are classified by their operating principle as: positive displacement, jet, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ion pumps. The most important parameters of vacuum pumps are: - Ultimate pressure (the lowest pressure attainable by the pump), - Pumping speed and how it depends on the pressure, - Capacity (usually measured in m3 of gas evacuated per unit of time).

Condition: used, Vacuum pump, vane cell pump, rotary vane pump WERIE RIETSCHLE Model CLFTL 25 DV Device No.: 481579 Delivery rate: 25 m3/h Vacuum: -0.6 bar (test run: -0.66 bar) Vacuum level: 60% Motor speed: 1,400 rpm Motor power: 1.4 kW Power supply: 220 Volt, 50 Hz - Dry-running pump without oil lubrication - Threaded connection for suction and pressure line: 1/2" Dimensions (L x W x H): 600 x 360 x 270 mm Rbsdpfoxciwnox Abmet Weight: 50 kg Good condition

Condition: new, functionality: fully functional, machine/vehicle number: XDS35I, overall weight: 50 kg, volume flow: 44 m³/h, input voltage: 230 V, input frequency: 60 Hz, input current: 6 A, rotational speed (max.): 1,750 rpm, Unused Edwards XDS35i Dry Scroll Vacuum Pump in shipping packaging. Manufacturer: Edwards Rsdpfx Aexrtr Uobmobt Model: XDS35i Voltage: 200-230V (6.6A | 50/60Hz) Weight: ~50kg Max displacement: 44 (m3/hr) Max pumping speed: 35 (m3/hr)

Condition: new, Year of construction: 2023, functionality: fully functional, Leybold Turbovac 90 i IS / DN 63 CF 811041V1000 Rodpfx Abow I Rt Ajmjbt

Condition: good (used), Year of construction: 1998, machine/vehicle number: 1515718, Vacuum pump BECKER compressor VTLF 500, 500 m³/hr, machine number 1515718, year of manufacture 1998, in good condition, immediately available, 4 units in stock Rbedpfoxbzdwox Abmet

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Busch MM 1142 B VS3 Vacuum Pump Manufacturer: Busch Vacuum Solutions Model: MM 1142 B VS3 Serial Number: D15242694 Year of Manufacture: 2015 Capacity: 140 m³/h Weight: 175 kg Dimensions: 1000 mm × 400 mm × 700 mm Pump Type: Dry claw vacuum pump The Busch MM 1142 B VS3 vacuum pump is a modern, oil-free “dry claw” pump designed for efficient and clean generation of vacuum in industrial applications. Its oil-free compression chamber design eliminates the risk of process contamination, making this pump ideal for industries requiring high process purity. The unit features quiet operation, low operating costs, and high reliability. Its compact design makes integration into production lines and central vacuum systems easy. Applications: - Food and packaging industry - Production lines and automatic vacuum systems - Plastics processing, foundry work, printing Rbodpfxexvi Aqs Abmet - Laboratories and central vacuum systems

Condition: used, Year of construction: 2003, functionality: limited functionality, machine/vehicle number: TSH 071, overall weight: 44 kg, input voltage: 220 V, input frequency: 50 Hz, Used Pfeiffer TSH 071 “Turbo Cube Drag Pumping Station”, portable turbo vacuum pump Manufacturer: Pfeiffer Rsdpfxjxqprze Abmsbt Model: TSH 071 Voltage: 190-260V (50/60Hz)

Condition: good (used), Machine number: 06363 Type / Model: E1M5 Vacuum: Displacement: 5.6 cm³ Inlet connection: KF 25 Exhaust port: 15 mm nozzle Engine oil: H/C Cooling: Air Connection: 0,25 kW 240V Condition: Redpfopbvi Dsx Abmsbt Weight: 17 kg Dimensions: 450 x 150 x 220 mm

Condition: ready for operation (used), Vacuum pump, oil-free vacuum pump, Becker VX4.10, Used machine Manufacturer: Becker Type: VX4.10 Weight: 16 kg Dimensions: 420 × 200 × 190 mm Volume flow 50 Hz: 10 m³/h Vacuum absolute 50 Hz: 100 mbar Power 50 Hz: 0.37 kW Noise Level 50 Hz: 60.0 dB(A) Volume flow 60 Hz: 12 m³/h Vacuum absolute 60 Hz: 100 mbar Power 60 Hz: 0.45 kW Rbodpfx Abjxh A U Rsmot Noise Level 60 Hz: 62.0 dB(A) Weight: 16.0 kg with motor