Used Vc 999 for sale (941)

Condition: used, Year of construction: 1993, Technical details: x-travel: 400 mm y-travel: 300 mm Gedpfx Akeu Idn Heysuc z-travel: 400 mm spindle revolutions per minute : 8000 U/min control: Fanuc OM clamping table: 500x300 mm magazine slots: 16 Stück tool taper: SK40 distance work spindle /surface of the table max.: 50-450 mm numbers of pallets: 2 Stück/part total power requirement: 10 kW weight of the machine ca.: 2,5 t dimension machine xH: 2,4x1,8x2,5 m transport measurements machine: 2,45x1,8x2,5 m - E-cabinet - cooling device - chip conveyor manufacturer META (conveying height 1500mm; width 200mm) *

Condition: used, Year of construction: 2007, x-travel 800 mm y-travel 650 mm z-travel 500 mm Control Heidenhain iTNC 560 spindle tunring speed 12.000 U/min In our estimation, the machine is in good used condition and can be inspected under power by appointment. Guodpfx Aey T Scwjkyoc Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: used, Year of construction: 2007, gearing type: other, first registration: 01/2007, color: orange, overall weight: 10,000 kg, mileage: 1,001 km, empty load weight: 1,502 kg, maximum load weight: 8,498 kg, driver cabin: other, Vehicle location: Bovenden, Superstructure: Roll-off salt spreader Lye capacity: 2,200 l, grit capacity: 5 m³ Guedpfxjr Hdhle Akysc The salt spreader was mounted on a roll-off frame! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, mileage: 1,001 km, power: 7 kW (9.52 HP), gearing type: other, fuel type: electric, color: yellow, empty load weight: 4,344 kg, number of seats: 1, first registration: 01/2012, Year of construction: 2012, driver cabin: other, load capacity: 2,000 kg, Vehicle location: Bovenden, mast height approx. 3100 mm! Accessory information provided without guarantee; subject to change, prior sale, and errors excepted! Gsdoyrqqpepfx Akyouc

Condition: used, Year of construction: 2011, gearing type: other, first registration: 01/2011, color: orange, mileage: 1,001 km, empty load weight: 616 kg, driver cabin: other, Vehicle location: Bovenden, Gjdpfjyuw Rbex Akysuc Body: Salt spreader approximately 2 m³. The salt spreader was mounted on a Unimog U300! ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE; changes, prior sale, and errors reserved!

Condition: good (used), Year of construction: 1995, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, x-travel 1000 mm y-travel 600 mm z-travel 600 mm Control: Heidenhain TNC 426 Spindle nose: 100–700 mm Work table: 1,080 x 580 mm Max. workpiece weight: 550 kg T-slots: 7 pcs. T-slot width: 14 mm Tool magazine with 36 positions Max. tool weight: 8 kg Gsdpfszcn Dhjx Akyouc Max. tool length: 340 mm Machine weight approx. 6.2 t Space requirement approx. 4,790 x 5,330 x 2,905 mm

Condition: used, Year of construction: 2016, operating hours: 2,836 h, lifting height: 5,720 mm, motor manufacturer: Elektro, gearing type: automatic, Jungheinrich ETV C16 reach truck, year of manufacture: 2016, battery: 2016, operating hours: 2,836h, previous owner: German Armed Forces, rated load capacity: 1,600 kg, lift height: 5,720 mm, fork length: 1,200 mm, sideshift, triplex mast with full free lift, including charger, overall height: 2,450 mm, good condition, immediately available for use. Leasing or financing options available on request. Mr. Mihm (Tel. ...) will be pleased to assist you. For more information, please refer to our website. Errors and prior sale excepted. Rental possible. = Further information = Gujdpfxozb Ugye Akyec Lift capacity: 1,600 kg Overall height: 245 cm For further details, please contact Tobias Ebert.

Condition: used, Year of construction: 2016, operating hours: 3,228 h, lifting height: 5,720 mm, motor manufacturer: Elektro, gearing type: automatic, Jungheinrich ETV C16 reach truck, year of manufacture: 2016, battery: 2016, operating hours: 3,228h, previous owner: German Armed Forces, rated load capacity: 1,600kg, lift height: 5,720mm, fork length: 1,200mm, sideshift, triplex mast with free lift, incl. charger, overall height: 2,450mm, good condition, immediately available! Guedpfszb Ugtsx Akysc Leasing or financing offers available on request. Mr. Mihm (phone) will be happy to assist you. Further information can be found on our website. Subject to prior sale and errors excepted. Rental possible = Additional information = Lifting capacity: 1,600 kg Overall height: 245 cm Please contact Tobias Ebert for further details.

Condition: new, feed pressure / bar liter capacity / l Gsdpfsy S Dz Nsx Akysuc total power requirement / kW

Condition: used, Year of construction: 2009, swing diameter 1400 mm faceplate diameter 1250 mm Control SIEMENS work height max. 1100 mm Gedpfxoy S D Tfs Akysuc table load 6 t total power requirement 80 kW Crossbeam travel: 700mm Crossbeam support Travel from centre of rotation to the right: 700mm Crossbeam support Travel from centre of rotation to the left: 700mm Machine table drive Main drive power: 80kW Number of gearboxes: 2 Step change: 3.84 Speed range of the 1st gear stage: 2-32-139 rpm Speed range of the 2nd gear stage: 9-125-500 rpm Max. Machine table load: 6 tonnes Feed drive Cross beam support Horizontal feed speed: 0.1 - 8 m/min Cross beam support Vertical feed speed: 0.1 - 8 m/min Cross beam support Rapid traverse speed horizontal/vertical: 8 m/min Cross beam adjustment speed: 425 mm/min Tool system Tool system: 180.1 Cutting force on the turning tool: 30 kN The machine enables additional drilling and milling via an integrated milling unit in the tool change system.

Condition: ready for operation (used), Year of construction: 1997, operating hours: 36,111 h, travel distance X-axis: 4,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: LE 430 CA, overall weight: 16,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 15,000 W, number of axes: 4, This 4-axis Matec 30 HV CNC was manufactured in 1997. It features an impressive X-axis travel of 4000 mm, Y-axis travel of 600 mm, and Z-axis travel of 800 mm. The machine is equipped with a powerful 10 kW drive and a tool changer with 36 magazine positions. If you are looking to get high-quality machining capabilities, consider the Matec 30 HV CNC vertical machining centre we have for sale. Contact us for further details. • Axes travel and speeds • X-axis; rapid traverse: 30 m/min; feed rate: up to 30,000 mm/min • Y-axis; rapid traverse: 30 m/min; feed rate: up to 30,000 mm/min • Z-axis; rapid traverse: 30 m/min; feed rate: up to 30,000 mm/min • Spindle • Drive power (100% duty cycle): 10 kW from 2000 rpm; torque 48 Nm up to 2000 rpm; approx. 6 Nm at 15,000 rpm (M = P*9550/n) • Drive power (25% duty cycle): 15 kW from 2000 rpm; torque 72 Nm up to 2000 rpm; approx. 10 Nm at 15,000 rpm (M = P*9550/n) • Coolant: Internal coolant 20 bar • Head: Swivel head with 1° indexing increments • Tooling Gusdpfx Akoyzq A Sjyoc • Tool changer: 36 positions • Max. tool diameter: 130 mm • Work area and clamping • Max. workpiece length for double-sided end machining: X = 3500 mm − 2 × max. tool length • Clamping surface: X = 4500 mm (clamping plate length) • Y = 650 mm (clamping plate length); 7 T-slots, 125 mm spacing • Electrical connection: Total connected load 42 kVA

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Weiler Praktikant VCD Precision Lathe Manufacturer: Weiler Model: Praktikant VCD Precision Lathe Guedey Ti Siopfx Akysc Year of manufacture: 2013 Condition: used, very good, as-new condition, no signs of wear, incl. new servicing and measurement protocol prior to sale Centre distance: 650 mm Centre height: 160 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 190 mm Cross slide travel: 150 mm Top slide travel: 110 mm Top slide swivel range: +/-65° Bed slide guide length: 350 mm Bed width: 205 mm Turning tool cross-section (height x width): 20 x 20 mm Height from top slide to centre: 30 mm Spindle nose according to ISO DIN 702-3 (DIN55027) size 5 Spindle diameter at front bearing: 70 mm Spindle bore: 43 mm Main spindle taper metric 50 Drive power: 6 kW Speed range: 30 – 4000 rpm Number of gear stages: 1 Number of speed ranges: stepless Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Facing feed: 0.006 – 0.2 mm/rev Quill diameter: 40 mm Quill travel: 85 mm Quill taper: 3 Morse taper Weight, without packing and accessories, approx. 1150 kg Length / Width / Height, net: 1720 x 890 x 1700 mm Headstock / rear wall / sliding safety cover: Light grey RAL 7035 Machine base / machine bed: Basalt grey RAL 7012 Screen display housing: Blue NCSS 4550-R80B

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Weiler Praktikant VCD Precision Lathe (2021) Manufacturer: Weiler Model: Praktikant VCD Precision Lathe Year of manufacture: 2021 Condition: Used, excellent, like new, incl. new maintenance and measurement protocol prior to sale Centre distance: 650 mm Centre height: 160 mm Guedpfxey Ti Nue Akyjc Swing over bed: 320 mm Swing over cross slide: 190 mm Cross slide travel: 150 mm Top slide travel: 110 mm Top slide swivel range: +/-65° Bed saddle guideway length: 350 mm Bed width: 205 mm Tool shank cross-section (H x W): 20 x 20 mm Height from top slide to turning centre: 30 mm Spindle head according to ISO DIN 702-3 (DIN55027) size 5 Spindle diameter in front bearing: 70 mm Spindle bore: 43 mm Main spindle taper metric 50 Drive power: 6 kW Speed range: 30 – 4,000 rpm Number of gear stages: 1 Number of speeds: stepless Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Facing feed: 0.006 – 0.2 mm/rev Quill diameter: 40 mm Quill stroke: 85 mm Quill taper: 3 Morse taper Weight, without packaging and accessories: approx. 1,150 kg Dimensions (L x W x H), net: 1,720 x 890 x 1,700 mm Headstock / Rear cover / Sliding guard: Light grey RAL 7035 Machine base / Machine bed: Basalt grey RAL 7012 Display housing: Blue NCSS 4550-R80B

Condition: excellent (used), Year of construction: 2017, Weiler Primus VCD (2017) Precision Lathe Manufacturer: Weiler Type: Primus VCD Precision Lathe Year of manufacture: 2016 Commissioned: 2017 Condition: used, very good, like new, new maintenance performed according to factory specifications with acceptance report Guedjy Ti Ikopfx Akyec Operating hours: 1777h Spindle hours: 512h Scope of delivery: - Documentation - Machine feet - Machine lamp - Chuck - Coolant system - MultiFix size A

Condition: used, mileage: 97,650 km, power: 70 kW (95.17 HP), first registration: 11/2019, fuel type: diesel, color: white, gearing type: mechanical, number of seats: 5, Year of construction: 2019, Equipment: air conditioning, central locking, power assisted steering, sliding door, The vehicle shows some scratches and bodywork marks certified mileage vehicle registered as N1 commercial vehicle transfer of ownership not included in the price 22% VAT to be added to the price the vehicle is sold as seen and liked in its current condition without warranty; warranty extension available through paid policy test drive possible customised financing available Guodpfx Akjyfiwujysc trade-in of used vehicles is possible the listed optional features may differ from those indicated for information or appointments, contact via Whatsapp or call the number listed

Condition: used, mileage: 1,079,545 km, power: 250 kW (339.91 HP), first registration: 08/1999, fuel type: diesel, overall weight: 17,990 kg, axle configuration: 2 axles, color: white, gearing type: semi-automatic, loading space length: 6,400 mm, loading space width: 2,450 mm, loading space height: 2,400 mm, Equipment: tail-lift, * Scania P114 LB 4x2 * Beverage box body with tail lift * 1 x bed * Front leaf suspension * Rear air suspension * Trailer coupling * Semi-automatic transmission * VIN: XLEP4X20004415232 * kW: 250 * Engine type: DC1101 * Displacement: 10,600 cc * Curb weight: 10,000 kg * Payload: 7,915 kg * Gross weight: 17,990 kg * Wheelbase: 4,700 mm * Body internal length: 6.40 m * Body internal width: 2.45 m * Body internal height: 2.40 m * Vehicle length: 8,400 mm * Vehicle width: 2,550 mm Guodpfx Akjrir N Aoyoc * Vehicle height: 3,650 mm * Net price * All information subject to change without notice. Tel./WhatsApp:

Condition: repair required (used), Year of construction: 2006, operating hours: 500 h, functionality: not functional, Control unit: SIEMENS Sinumerik 840D Table clamping surface: 650 x 410 mm Max. table load: 250 kg Gsdpfsy U Hw Esx Akyeuc T-slots: 3x 14 mm X-axis travel: 560 mm Y-axis travel: 410 mm Z-axis travel: 410 mm Spindle speed range: max. 12,000 rpm Spindle drive power: 12 / 18 kW Tool magazine capacity: 24 positions Max. tool diameter: 77 mm Max. tool diameter (with vacant adjacent slots): 125 mm Max. tool length: 200 mm Max. tool weight: 5.0 kg Tool change time: approx. 1.3 sec Rapid traverse (X / Y / Z): 48 m/min Total power requirement: approx. 30 kW Machine weight: approx. 4.0 tons Required floor space: approx. 3000 x 2000 x 2500 mm Equipment and Accessories: - NC rotary table (2-axis) - Coolant system - Spindle chiller - Machine feet Status Note:The machine is located in a technical vocational school and due to very infrequent use, the backup batteries have drained. These need to be replaced and the parameters must be reloaded.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance Z-axis: 1,500 mm, chuck outer diameter: 1,800 mm, spindle speed (max.): 315 rpm, turning diameter: 2,000 mm, turning height: 2,450 mm, rotational speed (max.): 3,000 rpm, year of last overhaul: 2026, FOR SALE – 12 MONTHS GUARANTEE – CE MARKED A DORRIES-SCHARMANN VCE2000/180MC-FC CONTUMAT Vertical Turning, Centre for high accuracy heavy cut turning, high precision heavy PCD drilling and continuous rotary milling Delivered in 2002. Condition: Excellent - see INTRO page CNC specification – high level Siemens 840D Hydrostatic crossrail and ram guideways. Cutting and positioning feed rates up to 18m/min A 9-STATION MAGAZINE is for turning toolheads & machining heads. These heads are picked up by the ram during cycle The turning and milling heads are fed by a KELCH DOUBLE GRIPPER TOOL CHANGER, as seen on most machining centres The tool changer collects the turning tools (CAPTO C8) and live spindle tools (SK50) from a WERO magazine The magazine as supplied with this machine originally has the capacity to hold 60 Capto C8 tools and 76 SK50 tools The KELCH toolchanger can change the tools in both vertical and horizontal working positions. This means, for example, that various SK50 tools can be fed into a right angle milling head while it remains on the ram MACHINE SALE POSSIBILITIES The machine specification will be finalized by the purchaser and VTT-WB New guarding will be supplied to match the final specification GUIDE PRICES A – machine without the pallet system but with the full tool changing and tool storage system. New guarding. CE marking 12 months full warranty, including 96% uptime guarantee and 12 months Preventive Maintenance Tool storage capacity can be reduced within this price Godoy Uw Emspfx Akyjuc £525,000 B – machine without the pallet system and toolchanging and storage system replaced with 30 pocket disc type magazine New guarding. CE marking 12 months full warranty, including 96% uptime guarantee and 12 months Preventive Maintenance £540,000 C – machine to original specification including full pallet system and full tool change system New guarding. CE marking 12 months full warranty, including 96% uptime guarantee on machine but excluding pallet and toolchange system £650,000

Condition: good (used), Year of construction: 1997, travel distance X-axis: 1,000 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 750 mm, CNC control Heidenhain TNC426 30-fold tool changer electronical handwheel chip screw coolant device Technische Daten / technical details: Verfahrweg X / X-Travel 1000 mm Verfahrweg Y / Y-Travel 750 mm Godeua S Hrepfx Akyeuc Verfahrweg Z / Z-Travel 750 mm Tischgröße / table size 1150x700 mm Werkzeugschaft / spindle taper SK40 Drehzahlbereich / spindle speed 12000 UpM /rpm Anzahl der Werkzeugplätze / tool places in ATC 30 Gewicht der Maschine ca. / weight ca. 10500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), Year of construction: 2003, operating hours: 8,000 h, functionality: fully functional, feed length X-axis: 3,500 mm, feed length Y-axis: 2,800 mm, feed length Z-axis: 1,500 mm, workpiece weight (max.): 35,000 kg, spindle motor power: 120,000 W, spindle speed (max.): 4,000 rpm, turning diameter: 4,000 mm, total height: 3,100 mm, rotational speed (max.): 180 rpm, workpiece diameter (max.): 4,000 mm, Equipment: documentation/manual, A STARRAG DORRIES 2VC2800/280MC-FC-V CONTUMAT High-Production 4/5 AXIS Vertical Turning Centre with Siemens 840D cnc This is not a machining centre with a turning table but a real high power, heavy duty vertical turning machine with the high power turning table on a massive base with guideways to provide a Y axis This configuration enables the machine to turn a round component to its maximum diameter and machine a square component to a similar dimension – and many more possibilities in between If a DS CNC swivelling head would be purchased from DS this machine is ready for huge 5 axis work. Gjdey Uwg Ropfx Akyjuc For large precise and complex components in these industries this is the perfect ‘one stop’ machine Defence, Aero Engine, Nuclear, Turbines, Rail, Oil and Gas, Pumps, Gearboxes, Rockets etc. 12 month guarantee. PAYMENT PLAN AVAILABLE

Condition: as good as new (ex-display), functionality: fully functional, type of input current: AC, SWIGRAPH - MARLON 5000 PVC Coil Forming Machine. Gedpfx Aov Ifc Iekysuc Automatic PVC/PET forming machine for plastic coils. Coil diameter range: 6mm to 56mm Cut lengths: 7.62cm to 122cm Coil pitch: 4;1 Power supply: 230 vac + external air supply

Condition: excellent (used), Year of construction: 2005, ENGEL VC1800/400 POWER injection molding machine Basic data Manufacturer: Engel Model: VC1800/400 Power Type: Tie-bar-less hydraulic injection molding machine Control: Engel EC100 Year of manufacture: 2005 Operating hours: 110,000 h Country of manufacture: Austria Clamping unit Parameter Value Clamping force 4000 kN (400 tons) Opening stroke 1008 mm Ejector stroke 250 mm Ejector force 96.2 kN Injection unit (current configuration) Screw Ø60 mm Parameter Value Screw diameter 60 mm Max. injection volume 764 cm³ Max. injection weight PS approx. 695 g Max. screw speed 226 rpm Injection rate 283 cm³/s Injection pressure 1963 bar Max. injection pressure 2361 bar Nozzle stroke 500 mm Nozzle clamping force 110 kN The data for the injection unit comes from the original machine data sheet. Drive Parameter Value Pump motor power 45 kW Mounting plates The machine belongs to the Engel Victory 400T series. Gedpfjzb Ivhsx Akyjuc Typical plate dimensions for this size are approximately: Parameter Value Fixed platen approx. 1200 × 1100 mm Moving platen approx. 1200 × 1100 mm Max. mold height approx. 300–800 mm Exact transport dimensions - 7.5 × 2.2 × 2.7 m / 20 t.

Condition: used, mileage: 379,614 km, power: 92 kW (125.09 HP), fuel type: diesel, overall weight: 3,500 kg, maximum load weight: 800 kg, first registration: 05/2012, reconditioned engine with 12 month warranty \atp expired to be renewed For information Gujdpfx Asvikdgskyoc

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 750 mm, spindle speed (max.): 12,000 rpm, number of axes: 3, TECHNICAL DETAILS X-axis travel: 1,000 mm Y-axis travel: 750 mm Gujdpfsy Rxqvex Akyec Z-axis travel: 750 mm Tool holder: ISO40 Max. spindle speed: 12,000 rpm MACHINE DETAILS Control: CNC Power: 22.0 kW Number of axes: 3 Weight: 10,500 kg

Condition: good (used), Year of construction: 1989, Max. turning Ø:1400mm Table Ø: 1200mm Control: CNC Altstohm Cyber 3000 Length: 2700mm Width: 2400mm Height: 3950mm Weight: 0kg Godewvrtuopfx Akyjuc