Used Ventrac 3200 for sale (1,461)

Condition: as good as new (ex-display), ►►► FRONIUS TPS 3200 SET OFFER with AW 5000 Hose Package ✅ Scope of supply: ➤ Fronius TPS 3200 power source (320A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 FC cooling unit – Standard equipped with flow control, thermocontrol, and coolant filter. The cooling unit switches off if the water cooling system fails or becomes too hot, to protect the hose package. These functions cost approximately €400 more at Fronius. ➤ Fronius VR 7000 wire feeder case – Compact and practical – in our opinion, the most useful wire feeder case – the wire is safely stored in the closed case. ➤ Fronius intermediate hose package, long – each unit is supplied with a 5-meter long connecting hose package between the power source and the wire feeder case for greater flexibility and easier handling. Take the wire feeder case with you to locations that are more difficult to access! The connecting hose package is neatly attached to a hook on the side of the unit. (The hooks are manufactured by us) ➤ Fronius large trolley – Probably the best trolley with gas cylinder holder on the market. ➤ Ground cable 3-4m ➤ Pressure regulator from Messer, new ➤ Spool adapter for large wire spools, new With this unit, almost all materials can be welded, including aluminum, steel, and V2A. It has filler wire programs and is also suitable for MIG brazing (Cusi), which is often used in the sheet metal industry. Additional options are available at an extra charge. e.g., Fronius Job Master hose package (display on the torch) + EUR 450.00 The first 10 buyers of a unit will receive an additional 2nd hose package free of charge. IMMEDIATELY AVAILABLE VAT INVOICE Inspection is possible in Austria, Vienna 1230! ✔ Insured shipping on a pallet is no problem! ✔ We are also available via Whatsapp and Viber. ✅ Questions ✅ Questions ✅ Questions ✅ Questions: ✅ Questions ✅ Questions ✅ Questions ✅ ►►► What is the condition of the units? For clarification, we buy like-new used units, disassemble them, check everything, and replace any worn parts if necessary. Only after a successful test weld is the unit approved for sale. "All" units are clean and have no burn marks on the displays or numerous burn marks or dents on the unit. Dodpfx Aijwbille Ejwd You are buying from us an item that is also worth seeing and does not look completely worn out! ►►► Do we receive an invoice when we buy from you? Yes, you will receive a proper invoice from us. If you have a valid VAT ID, we can issue a net invoice if the requirements for an intra-community delivery within the EU are met. ►►► What payment options are available? Advance payment or cash upon personal collection. ►►► Why buy from us? We are professionals for this Fronius welding machine series and always have 60-80 units in stock – exclusively Fronius, no other manufacturers! We are familiar with these units and do not sell anything that we do not know about. All prices are starting prices; you can configure the units with us. Robot unit or hand unit. Long or short connecting hose package. Various hose packages to choose from. Synchro pulse. 270, 400, or 500 ampere units in stock. CMT version available as hand or robot unit. It is best to call us; we will discuss your application area, and you will receive an initial price estimate from us.

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 220113, total length: 3,500 mm, total height: 2,500 mm, total width: 1,500 mm, overall weight: 12,500 kg, feed length X-axis: 3,000 mm, input voltage: 400 V, type of input current: three-phase, We offer this used CNC edge banding machine, Otinus WC67Y-250/3200, manufactured in 2022. Manufacturer: Otinus Dwjdpe Adgrpefx Ai Eed Model: WC67Y-250/3200 Year of manufacture: 2022 Machine type: CNC edge banding machine Bending compensation If you have any questions or require further information, please send us a message or contact us by phone.

Condition: excellent (used), Year of construction: 2021, operating hours: 700 h, functionality: fully functional, cutting width (max.): 3,200 mm, table height: 800 mm, overall weight: 1,610 kg, total width: 4,000 mm, total height: 800 mm, total length: 7,000 mm, table width: 3,200 mm, table length: 3,200 mm, Equipment: safety light barrier, Are you looking for a Zund cutting table in perfect condition? Due to changes in our production processes, we are offering our exceptionally young and fully equipped Zünd G3 3XL-3200 for sale. Featuring a massive working area of 3200 mm x 3200 mm, this machine is the ultimate production tool for processing wide-format textiles and XXL flatbed materials. With only 700 production hours on the clock, the system is in absolute mint condition. Equipped with an extended table and a professional unwinding system, this setup is fully optimized for a highly efficient, continuous, and tension-free roll-fed workflow. Key Specifications & Configuration: • Working Area: 3200 mm x 3200 mm (3XL-3200) – Accommodates materials up to 3.2 meters wide! • Extended Table: Ideal for seamless material advance, easy weeding/offloading, and uninterrupted production. • Unwinding System (Roll Feed): Industrial textile unwinder ensuring perfectly tension-free and straight material feeding directly from the roll. • Software: Includes Zünd Cut Center (ZCC) software license. Included Modules and High-End Tools: • DRT (Driven Rotary Tool): Driven rotary tool specifically designed for reliable, fast, and wrinkle-free cutting of various textiles (such as banner material, polyester, canvas, and mesh). • Registration System: Integrated camera system for precise registration mark recognition and automatic contour compensation. Machine Condition: Dwodpfx Aisz Inc Re Eod The machine is in absolute mint condition and has only operated in a clean production environment. It has been fully maintained according to factory guidelines. The Zünd is currently still installed under power and can be demonstrated fully operational for serious inquiries. Decommissioning, transport, and installation are at the buyer's expense and risk (assistance in contacting certified Zünd technicians can be provided).

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, For sale is a robust Lazzari Juno 320 panel saw in a heavy-duty industrial design. This machine is ideally suited for professional use in carpentry, joinery, and interior design. Thanks to the easy-to-use sliding table, the generously sized machine table, and the 45° swivel function of the saw blade, the machine enables precise longitudinal, cross, and miter cuts. Technical data: Manufacturer: Lazzari Type: Juno 320 Year of manufacture: 2001 Main motor: 5.5 kW Voltage: 400 volts Djdpfx Ajzn N Uksi Ejwd Speed: 3,200 / 5,000 rpm Cutting length / table length: 3,200 mm Table width to the right of the saw blade: 1,250 mm Machine weight: approx. 750 kg CE version Equipment: Sliding table 3,200 mm Saw blade, 45° tiltable Mechanical height and swivel adjustment Parallel fence with fine adjustment Angle/miter fence with scale Generously sized machine table Robust aluminum guide Control panel with emergency stop Speed control 3,200 / 5,000 rpm Heavy-duty industrial design Precise guide systems Dust extraction connections Ideally suited for: Solid wood processing Panel cutting Furniture making Interior design Carpentry and joinery workshops Series and individual production The machine is in good, used condition with the usual age-related signs of wear. It impresses with its stable design, high cutting precision, and reliable industrial drive. Inspection and a test run are possible at any time by appointment. Transport is possible for an additional charge! The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes are subject to change. All information without guarantee.

Condition: good (used), Year of construction: 2017, operating hours: 470,000 h, functionality: fully functional, machine/vehicle number: 1HA06A, overall weight: 2,200 kg, type of input current: three-phase, total width: 12,000 mm, total length: 40,000 mm, total height: 1,600 mm, power: 11 kW (14.96 HP), working width: 3,200 mm, number of ink cartridges: 6, used machine, working state Dwjdpettunyofx Ai Eod

Condition: like new (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 15630;15631, color channels: CMYK, number of print heads: 40, counter reading (black): 12,000,000, counter reading (color): 2,000,000, Equipment: auto duplex, documentation/manual, Only 2 (two) million clicks on color meter! 12 Million on black meter. Excelent condition! 30 kHz printing heads, 40 printing heads, all of them in mint condition, no streaking or any demage on heads. It was under full maintenance of Canon Hungary Dwedpfx Aijz E Uqce Eod Canon unwinder andd Hunkeler RW6 rewinder included Acelabs AceformChecker Prit Validating System on machine. Best choice for spareparts or donor.

Condition: good (used), Year of construction: 1972, functionality: fully functional, Drawing slide force: approx. 800 Mp Blank holder force (die cushion): 320 Mp Drawing slide stroke: 900 mm Blank holder stroke (die cushion): 400 mm Maximum distance between table and slide: 1920 mm Table size: 3200 x 2000 mm Dwodpfx Ais Ah Squs Eod Clear opening on the loading side: 3250 mm Table height above floor level: 400 mm Overall height above floor level: 6300 mm Drive power: 100 hp Machine weight: 153 tons

Condition: like new (used), Year of construction: 2004, functionality: fully functional, overall weight: 4,000 kg, total height: 2,100 mm, total width: 6,200 mm, type of input current: three-phase, input voltage: 400 V, control cabinet height: 1,800 mm, input current: 1,250 A, Siemens Sikus Type 3200 Power Distribution Panel Sub-distribution switch cabinet, distribution panel, power distribution board 400V 1250A (for further information, please refer to image 21) 9x single cabinets 600mm – 1x 800mm = total length 6200mm (contrary to the drawing: 10x 600mm!!) Cabinet dimensions approx. H210xW60/80xD60cm each, incl. plinth and lifting eyes Connection from transformer 1250A to circuit breaker (Siemens 3WN6361-DWA05-1KA1) with coupling switch etc. (images of the circuit diagrams are attached). Three identical Siemens circuit breakers are installed. Equipped with multiple transformer metering on the main switch and residual current monitoring Busbar rated up to max 1600A Dodpfx Aijynv H Is Ejwd Outgoing circuits: circuit breakers – Neozed NH00, NH1 fuses, etc. Excellent condition – almost as new – see pictures The dismantling was carried out by a professional electrical company. All copper busbar connectors and screws are included. Internal wiring for energy metering is pulled back and labeled. The cabinets are dismantled and packed on 5 pallets. Weight approx. 4000kg Collection only by appointment in 75053 Gondelsheim Forklift available for loading Shipping by freight forwarder possible, please inquire with ZIP code

Condition: like new (used), Year of construction: 2020, functionality: limited functionality, operating hours: 50 h, power: 50 kW (67.98 HP), input voltage: 380 V, input current: 80 A, input frequency: 60 Hz, type of input current: three-phase, cutting height (max.): 72 mm, saw blade diameter: 380 mm, height adjustment type: pneumatic, actuation type: electric, total length: 7,500 mm, total width: 6,000 mm, total height: 1,900 mm, overall weight: 5,000 kg, table height: 1,000 mm, Equipment: CE marking, documentation/manual, saw blade guard, scorer, AES Alpha Heavy Duty Beam Saw 3200 * 3800 mm | Showroom Condition | Less 100 Hours Category: Panel Saw / Beam Saw Condition: Used – Like new showroom machine Description: For sale: AES Alpha heavy duty beam saw. The machine has been used exclusively in a showroom for demonstrations and training. It is in working condition with less than 100 working hours. Equipped with all Yaskawa and Schneider Electric drivers. Technical Data: Cutting width: 3200 mm Bridge depth: 3800 mm Dwodeyzzguopfx Ai Eed Main motor: 15 kW (20 HP) Scoring motor: 2.2 kW (3 HP) Max cutting height: 72 mm Saw carriage speed: 70 m/min Pusher speed: 60 m/min Max blade: 380 mm Max scoring blade: 200 mm 8 clamps AES Alpha Heavy Duty Paneelzaag 3200 mm | Showroomstaat | Minder 100 Werkuren Categorie: Paneelzaag / Opdeelzaag Conditie: Gebruikt – Zo goed als nieuw (Showroom) Beschrijving: Te koop: AES Alpha heavy duty paneelzaagmachine. Deze machine werd uitsluitend gebruikt in een showroomomgeving voor demonstraties en trainingen. De machine verkeert in uitstekende staat en heeft minder dan 100 werkuren. Uitgerust met hoogwaardige aandrijvingen van Yaskawa en Schneider Electric, wat zorgt voor maximale betrouwbaarheid en precisie. Technische specificaties: Snijbreedte: 3200 mm Brugdiepte: 3800 mm Hoofdmotor: 15 kW (20 HP) Voorritsmotor: 2,2 kW (3 HP) Maximale zaaghoogte: 72 mm Zaagwagensnelheid: 70 m/min Duwbalk snelheid: 60 m/min Max. zaagdiameter: 380 mm Max. voorritsdiameter: 200 mm 8 klemmen Luchtkussentafel (3 stuks): 1 vast, 2 verplaatsbaar Pneumatische zaagwagen beweging Aandrijvingen: Yaskawa & Schneider Levering: Binnen 10 dagen mogelijk Prijs: Op aanvraag

Condition: used, Year of construction: 2022, For sale: a CNC bending press, model FICOM PBH-63T/3200, manufactured in 2022, with minimal usage. The machine was purchased new and has seen very little use. It is currently fully operational and connected to power, allowing for inspection, testing, and trial bends. The machine is available on-site and ready for immediate pickup. We have the technical documentation for the machine. Key information: Manufacturer: FICOM Djdpfxjz Aiqzo Ai Eowd Model: PBH-63T/3200 Year of manufacture: 2022 Bending force: 63 T Working length: 3200 mm Controller: ESTUN E21 Controlled axes: X and R axes with NC control Equipment and features: ESTUN E21 controller Automatically controlled X and R axes Quick release system for upper tools Linetech Laser Safe laser operator protection system 85° bending punch and die 30° bending punch and die Technical documentation for the machine Two different sets of bending tools allow the machine to be immediately adapted to different bending tasks. If you have any further questions, we will be happy to answer them.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 244136, clamping force: 3,200 kN, screw diameter: 55 mm, clearance between the columns: 720 mm, displacement volume: 570 cm³, injection pressure: 2,000 bar, injection weight: 521 g, mold height (min.): 300 mm, total length: 7,460 mm, total width: 1,848 mm, total height: 2,267 mm, overall weight: 20,000 kg, For sale is an injection molding machine from the manufacturer Arburg, type 720 H 3200 - 1300, from 2018. The machine is in very good condition. Dsdezl Tc Tjpfx Ai Eowd Clamping force: max. 3,200 kN Mold opening force: max. 110 kN Opening stroke: max. 600 mm Mold height (variable): 300 mm to 800 mm Platen distance (variable): max. 900 mm to 1,400 mm Distance between tie bars (H x V): 720 mm × 720 mm Size of the mounting platens (H x V): 1,040 mm × 1,040 mm Max. weight of the moving mold half: 2,900 kg Ejector force | Stroke: max. 86 kN | 250 mm Screw diameter: 55 mm Effective screw length (L/D): 22 Maximum screw stroke: 240 mm Calculated stroke volume: 570 cm³ Maximum shot weight (in polystyrene/PS): 521 g Maximum injection pressure (holding pressure): 2,000 bar Maximum material throughput (PS): 86 kg/h Maximum injection flow rate: 713 cm³/s Specific injection pressure (max.): 2,000 bar Nozzle closing force | Stroke (max.): 90 kN | 550 mm Heating power / Heating zones: 22.9 kW | 8 zones 3. Connection values & machine weights Net weight of the machine (without oil): 18,550 kg Oil capacity (hydraulics): 410 liters Cooling water connection: max. 30 °C | min. 1.5 bar differential pressure (Δp) | Nominal size DN 25 Drive power (pump motor): max. 60 kW Total connection power (electrical at 400V/50Hz): 84 kW Max. current / Fuse rating: Machine total: 125 A Heater: 40 A Upon request, transport and loading can be arranged for an additional fee, throughout Europe. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange is possible! Machine Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Gjbn N Ay Dowza Dxogoil Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: BN2222, Demag chain hoist crane lifting mechanism 3200 kg DC-Pro 16-3200 H8 V4/1 Load capacity 3200 kg / 3.2 t, lifting capacity – 2-strand with trolley drive (beam width approx. 25-33 cm) Dwodpfezhtfmjx Ai Eod with 2 lifting speeds, lifting height approx. 8 m!!! incl. control valve block Total weight approx. 160 kg, connection to 400 V 50 Hz Very good condition, hardly used Item location is 75053 Gondelsheim See pictures

Condition: used, Year of construction: 2019, machine/vehicle number: 197341119, input voltage: 400 V, input frequency: 50 Hz, pressing force: 120 t, table width: 1,400 mm, table length: 3,200 mm, ITALPRESSE XL/8-S – Thermoil-heated platen veneer press Year of manufacture: 2019 Machine number: 197341119 Press area: 3,200 x 1,400 mm Pressing force: 120 tons Djdpfxs Agxfgo Ai Eowd Heating: Thermoil with electric boiler Electrical connection: 400 V / 50 Hz Hydraulic veneer press with control unit and hydraulic unit, as shown in the photos. Press area and pressing force according to the delivery note; year of manufacture and machine number according to the nameplate. Location: Basel area, Switzerland. Inspection possible until early December 2026 by appointment. Dismantling and removal between December 8th and 18th, 2026, after coordinating a schedule. Price upon request. Scope of delivery and current operating condition to be agreed upon. Subject to change and errors.

Condition: good (used), functionality: fully functional, Year of construction: 2022, Electric bending machine in good condition, with automatic back gauge. Specifications: Model: SCHRÖDER MAKU Year: 2022 Made in: Germany Working length: 3,200 mm Bending thickness: 1.5 mm Bending beam tooling: 10 and 25 mm Controller: Classic bend Motor: 2.5 kVA Weight: 2.7 tons If you have any further questions, we will be happy to answer them. Dwedpfxoy Ucyco Ai Eod

Year of construction: 2010, condition: used, A shredder with control cabinet, three spare motors and discharge conveyor is available: 1) Lindner Jupiter 3200 shredder, dimensions: 6500x2500x3200mm, weight: 36t, operating hours: 58545h, with hopper, operator panel and hydraulic power unit. 2) Control cabinet for Jupiter 3200, dimensions: 3000x2000x600mm, weight: 980kg, with frequency converter, water cooling units and recooling unit. 3) Spare motor ABB M3BP 315LKA 6, power: 160kW, speed: 994rpm, IE3, dimensions: 1200x800x600mm, weight: 1.41t, is unused. 4) 2x spare motor Schorch 315L IMB3, power: 160kW, speed: 988rpm, dimensions: 1200x800x600mm, weight: 1.3t. 5) Inclined conveyor FC H101 1200/9200, dimensions: 9200x1500x1800mm, weight: 1.7t. The machine was regularly serviced by the manufacturer. During annual rotor maintenance, the rotor was fully hardfaced. The track was retensioned every three months. New motors with energy efficiency class IE3 were installed in 2021. The foreign object flap was replaced in 2024. Two couplings were replaced in 2024. The machine is operational. An on-site inspection is possible. The machine is not connected to the power supply. Dedpfx Aie Aa Alkj Eowd

Condition: new, Year of construction: 2026, Discover the new RED 3200/0.8/160° folding machine from Prod-Masz – available to test on-site and ready for immediate pickup! This state-of-the-art machine features specialized cutouts, allowing for flexible sheet metal processing. Benefit from expert on-site instruction to ensure you make the most of the machine’s functions and capabilities. See for yourself the quality and versatility it offers! Technical Specifications: - Working length: 3200 mm - Bending capacity: up to 0.8 mm - Bending angle: max. 160 degrees - Bending beam thickness: 15 mm - Upper beam lift: 80 mm - Weight: approx. 600 kg - Upper beam adjustable to three positions Features: - Degree scale - Angle stop Dsdpfxe Aic Eqj Ai Eowd - Rear support frame - Front depth stops - CE certificate - 12-month warranty Optional accessory: Roller shear (up to 0.8 mm) – 350 EUR Shipping within Germany: 360 EUR All prices are subject to 19% VAT Self-pickup available

Condition: like new (used), Year of construction: 2002, functionality: fully functional, type of input current: three-phase, cutting height (max.): 177 mm, saw blade diameter: 500 mm, tilt adjustment saw blade: 45 °, height adjustment type: electric, saw blade bore: 30 mm, actuation type: electric, total length: 4,000 mm, overall weight: 870 kg, table height: 870 mm, Equipment: CE marking, saw blade guard, PAOLONI P3200A 4200mm cutting length panel saw | Scoring saw | Electronic control | Year 2002! Professional PAOLONI P3200A panel saw from 2002 – a high-quality Italian industrial machine designed for precise cutting of solid wood and wood-based panels. The P3200A model stands out with its exceptionally rigid construction, precise guidance of the sliding table, and electronic control, which has made it a popular choice in professional carpentry workshops and furniture factories for many years. The machine is ready for operation and is ideal for both individual and serial production. KEY ADVANTAGES - Year of manufacture: 2002 - Italian manufacture: PAOLONI - Sliding table length: 3800 mm - Electronic machine control - Scoring saw - Saw blade tilt: 0–45° - Precise aluminum sliding table - Massive cast iron worktable - Professional upper guard with dust extraction - Ideal for furniture boards, MDF, HDF, plywood, and solid wood - Machine ready for operation TECHNICAL DATA - Manufacturer: PAOLONI (Italy) - Model: P3200A - Year of manufacture: 2002 - Cutting length: 4200 mm - Aluminum sliding table length: 3800 mm - Sliding table travel: approx. 3500 mm - Cutting width with parallel guide: up to 1300 mm - Cutting length: 4200 mm - Tilting unit: 0–45° - Scoring saw: YES - Electronic control: YES - Control display: YES - Main saw blade diameter: up to 500 mm (according to P3200 series documentation) - Saw blade bore: 30 mm - Scoring saw blade diameter: 125 × 20 mm - Maximum cutting height at 90°: up to 177 mm (depending on the saw blade used) - Maximum cutting height at 45°: up to 133 mm - Cast iron table dimensions: 1150 × 680 mm - Table height: 870 mm - Installed power (nameplate): 8.05 kW Weight: 870 kg EQUIPMENT - electronic control panel - scoring saw - tilting saw unit - 3200 mm aluminum sliding table - parallel guide - upper guard with dust extraction - safety switch - cast iron worktable APPLICATION The machine is intended for: - furniture production - carpentry workshops - door production - window production - cutting laminated boards - MDF - HDF - plywood - solid wood - wood-based materials The machine is in very good technical condition. Dwsdszxxi Eopfx Ai Ejd The solid Italian construction ensures high operational efficiency, high cutting accuracy, and years of trouble-free operation. PRICE: VAT MARGIN BRUTTO OR VAT 23% INVOICE WE ORGANIZE TRANSPORT WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: excellent (used), Year of construction: 2011, Arburg 1500T 3200-1300 e² / hybrid machine with one rotary table Year of manufacture: 2011 Injection unit: Screw diameter: 60 mm injection weight: 607 g Dwodpjz Iqdqefx Ai Eed Injection pressure: 2000 bar Metering volume: 664 ccm Clamping unit: clamping force: 320 t tie bar distance: 0x0 mm size of clamping platens: 1510 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 30.000 in automatic mode Euromap 67 Robot interface Control with air valve Hydraulic core pull x 3 Control with hot runners x 13 Injection unit hardened - bimetal Main machine motor - servo motor driven by inverter Very precise rotary table driven by servo motor controlled by inverter Rotary table diameter: 1500 mm Horizontal injection unit with automatic injection height adjustment Self-closing nozzle Primus sensor - mold pressure control It is possible to convert the injection unit so that it works vertically Dimensions: Weight: 16080 kg Length/width/height: 4.91x2.12x4.62 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: good (used), functionality: fully functional, Year of construction: 2012, Motorized Swivel Bending Machine Mfg. SCHRÖDER Type: MAK 4 EVO 3200/6.0 UD Year: 2012 Technical Data Manufacturer: SCHRÖDER Type: MAK 4 EVO 3200/6 UD Year of manufacture: 2012 Working length: 3200 mm Capacity: 6 mm Upper die stroke: 850 mm Upper die geometry: 180° Bending center adjustment: 100 mm Dimensions: approx. L 6.45 x W 2.65 x H 2.75 m Machine weight: approx. 20.6 t Accessory weight: approx. 3.4 t Dedpfxszrvdgs Ai Ejwd Equipment - Up’n Down bending die, automatically controlled by POS 3000 - Upper die tool clamping, hydraulic - Bending die tool clamping, hydraulic - Motorized central crowning - Motorized bending die adjustment, program-controlled - Bending center optimization via bending center adjustment - Foot switch - Protection of operation from the rear, controlled by a light curtain and safety PLC - Safety package EVOLUTION UD with tool changer incl. safety fence - Speed optimizer Z-axis drive (max. axis speed: 120 mm/s) Control system: POS 3000-3D graphic control View of product and machine in 3D – display Radius-Step-Bending function Stop system Positioning stop 10 - 3400 mm in U-shape with 4 sectors (850/1700/2550/3400), Panel for individual positioning of the control, pneumatic lowering of the stop fingers, steel balls in the support table. Angle stop left and right 1500 mm. The support plates are divided and can be removed individually to create the necessary space for existing counter-bends. - 2 pneumatically lowerable angle stops mounted on the frame - Front stop function of the bending die for accommodating bending rail finger segments incl. 2 finger segments matching the bending rail Fully automatic tool changer Tool changing portal for upper die tools with hydraulic tool clamping (total 7 axes) for maximum upper die tool height of 400 mm, two asynchronously movable tool changers each with three gripping units Upper die tool Tools WZS 2000, approx. 1000 N/mm2 tensile strength • Tool set for automatic tool changer, upper die Goosefoot set h= 180 mm incl. corner pieces left and right. Bending die tools Tool system for the bending die WZS 3000, approx. 1000 N/mm2 tensile strength Bending rail "A", segmented, stepped, b= 15 mm, h= 101 mm No. 1 - L = 2 x 25, 30, 35, 40, 45, 50 = 225 mm No. 2 - L = 14 x 200 mm Bending rail "A", segmented, stepped, b= 20 mm, h= 101 mm No. 1 - L = 2 x 25, 30, 35, 40, 45, 50 = 225 mm No. 2 - L = 14 x 200 mm 2 finger segments for front stop matching bending rail b= 20 mm •Bending rail "A", segmented, b= 30 mm h= 101 mm No. 1 - L = 2 x 25, 30, 35, 40, 45, 50 = 225 mm No. 2 - L = 14 x 200 mm 2 finger segments for front stop matching bending rail b= 30 mm Lower die tools Lower die rail with recesses segmented, same radius as upper die tool b= 117 mm h= 40 mm Total length 3.240 mm, divided into 4 x 500, 2 x 620 mm All information is without guarantee. A demonstration under power is possible at any time by arrangement.

Condition: new, Year of construction: 2026, machine/vehicle number: 3208, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, cutting height (max.): 125 mm, cutting width (max.): 1,250 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 45 °, total length: 6,700 mm, total width: 4,670 mm, total height: 1,480 mm, overall weight: 815 kg, Equipment: CE marking, documentation/manual, saw blade guard, Piła formatowa LAZZURI FX 3200 przeznaczona jest do cięcia drewna oraz materiałów drewnopochodnych, takich jak płyty wiórowe, MDF i sklejka, przy zastosowaniu odpowiedniej tarczy. Maszyna sprawdzi się w warsztatach stolarskich, zakładach meblowych oraz przy produkcji elementów na wymiar. Stół formatowy o długości 3200 mm umożliwia obróbkę materiałów wielkoformatowych, a pochylany agregat pozwala na wykonywanie cięć prostych oraz pod kątem. Pilarka wyposażona jest w silnik główny o mocy 5,5 kW oraz podcinak napędzany osobnym silnikiem o mocy 0,75 kW. Trzy prędkości obrotowe tarczy głównej pozwalają dopasować pracę do obrabianego materiału i zastosowanego narzędzia. DANE TECHNICZNE: – producent: LAZZURI, – model: FX 3200, – typ maszyny: piła formatowa z podcinakiem, – moc silnika głównego: 5,5 kW, – moc silnika podcinaka: 0,75 kW, – maksymalna średnica tarczy głównej: 400 mm, – maksymalna średnica tarczy podcinaka: 120 mm, – prędkość obrotowa tarczy głównej: 3000 / 4000 / 5000 obr./min, – prędkość obrotowa tarczy podcinaka: 8000 obr./min, – maksymalna długość cięcia: 3200 mm, – maksymalna szerokość cięcia: 1250 mm, – maksymalna wysokość cięcia przy 90°: 125 mm, – maksymalna wysokość cięcia przy 45°: 85 mm, – zakres pochylenia agregatu: od 90° do 45°, – regulacja wysokości cięcia: ręczna, – regulacja kąta cięcia: ręczna, – średnica króćca odciągowego: 100 mm, – masa maszyny: 815 kg. STÓŁ I PROWADNICE: – aluminiowy stół formatowy o długości 3200 mm, – szerokość stołu formatowego: 418 mm, – stół prowadzony na prętach za pomocą systemu rolek, – rozsuwana przykładnica poprzeczna o maksymalnej długości 3200 mm, – dwa przesuwne ograniczniki na przykładnicy poprzecznej, – szkła powiększające ułatwiające odczyt skali przy ogranicznikach, – przykładnica równoległa z aluminiowym liniałem o długości 700 mm, – skala przykładnicy równoległej do 1250 mm, – blokowanie przykładnicy równoległej za pomocą szybkozacisku. WYPOSAŻENIE I FUNKCJE: Dsdpj Af If Tsfx Ai Eewd – podcinak z osobnym silnikiem, – podwójnie łożyskowany wał piły, – trzy prędkości obrotowe tarczy głównej, – zmiana prędkości za pomocą pokrętła, – ręczna regulacja wysokości i kąta cięcia, – wskaźnik zegarowy przy regulacji, – elektroniczny licznik do ustawiania szerokości cięcia. WYMIARY WYMAGANE DO USTAWIENIA MASZYNY: – długość: 6700 mm, – szerokość: 4670 mm, – wysokość: 1480 mm. ZALETY MASZYNY: – długość cięcia 3200 mm, – szerokość cięcia 1250 mm, – możliwość cięcia pod kątem do 45°, – maksymalna wysokość cięcia 125 mm przy tarczy 400 mm, – podcinak z niezależnym silnikiem, – trzy prędkości obrotowe tarczy głównej, – możliwość obróbki dużych płyt i elementów meblowych.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, feed length X-axis: 3,200 mm, feed length Y-axis: 800 mm, feed length Z-axis: 600 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC 530, workpiece weight (max.): 3,300 kg, table width: 750 mm, table height: 720 mm, table length: 3,900 mm, rotary table diameter: 315 mm, overall weight: 16,500 kg, spindle speed (min.): 30 rpm, spindle speed (max.): 8,000 rpm, spindle motor power: 25,000 W, spindle nose: ISO 40 DIN 69871, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, - Lowered worktable by 185 mm Dwsdpfx Aiszycawo Eed - Spindle-to-table distance: 325/925 mm - Maximum tool length: 330 mm - 4-position PICK UP tool changer station for drills with a length of up to 700 mm - Coolant system with passage through the spindle at 30 bar, with paper filter - Drag-type chip conveyor - CNC table diameter: 315 mm - Prepared for indexing operations - CE marking

Condition: good (used), functionality: fully functional, Year of construction: 2009, controller model: Siemens Sinumerik 840D, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Working area 3050 x 1550 mm Dwedpfx Aijz Rl Uqs Ejd - Hi-Las high-pressure cutting - Cutting head quick-change system - Programmable cutting gas selection/pressure adjustment - Capacitive height control APC - Function: ContourLas - Slag cone detection - Compact dust extraction system - Tank heating - Automatic tool changer with 19 stations (21 – clamping jaws) - 2 clamping jaws - Rotation of all tools - NC-controlled, digitally operated, maintenance-free three-phase drives - Automatic repositioning - Tool length compensation - Rapid shutdown of the hydraulics - Automatic shutdown - Automatic indexing slides, each 500 x 500 mm - Sensors for both indexing slides - Slug extraction - Forming capability - Programmable stamping tool lubrication - Programmable clamping device - Adaptive stroke length control - Safety devices - RJ 45 network connection - 3.5'' floppy disk drive + 5'' cutting head + 9" cutting head + FocusLine + MultiTool function + Thread forming function + Signing/quick beading function + Deburring and rolling technology function + Softpunch function + Additional clamping jaw + Repositioning cylinder + Vibration-damped installation + Blow-out device for small parts + Chip conveyor with tilting container

Condition: good (used), Year of construction: 2009, laser type: CO₂ laser, laser power: 3,200 W, X working area max.: 6500 mm Laser power: 3200 watts Control: SINUMERIK 840D Standard equipment: - Robust machine frame with integrated laser unit - CO2 laser TLF 2000, high-frequency excited, with cooling unit Djdps Ahi Trjfx Ai Ejwd - Drives: Maintenance-free three-phase servo motors - Hl-LAS high-pressure cutting - Fast processing with SprintLas - Programmable cutting gas pressure adjustment - Laser cutting head with 5" lens, DIAS III - Quick-change device for cutting head - Laser power control - Laser logbook function - Automatic shut-off - Work area lighting - Control system SINUMERIK 840D: Open PC-based control, easy operation, diagnostic functions, maintenance logbook, technology data, teleservice, 3.5" floppy disk drive, RJ45 network connection - Safety: Multi-beam light barriers, fully enclosed and ventilated beam guidance, compact extractor, protective cabin - PRS 3001 unloading station with brush table - Chuck set D 20-85 mm Special equipment: + Upgraded to Laser TruFlow 3200 + SeamLine Tube + LoadMaster Tube 6.5 m, rear + Focus Line

Condition: good (used), Year of construction: 2008, Ref. -No.: 10628 Manufacturer: AUERBACH Type: IA 5B 3200 RT Year of construction: 2008 Type of control: CNC-Steuerung Control: Heidenhain Storage location: Halberstadt Country of origin: Germany X-Travel: 3200 mm Y-Travel: 2000 mm Z-Travel: 1600 mm Rotary Table (Lxw): 2500 x 2000 mm No. Of Working Stations: 60 Machine length: 7300 mm Machine width: 7700 mm Machine Height: 4350 mm Djdpfxozc D D Rj Ai Ejwd Weight Of The Machine Ca.: 28 t Further information: - with -H / V- head Machine can be viewed under power by arrangement

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, power: 7.5 kW (10.20 HP), cutting height (max.): 200 mm, cutting width (max.): 1,450 mm, saw blade diameter: 550 mm, rotational speed (max.): 4,800 rpm, rotational speed (min.): 2,800 rpm, overall weight: 1,280 kg, cutting length (max.): 3,200 mm, cutting height with scoring (max.): 200 mm, cutting width at rip fence: 140 mm, table length: 3,200 mm, Equipment: motor brake, scorer, Heavy-duty panel saw with scoring unit and Siemens three-axis control system Exhibition machine with full warranty Hanging control panel with Siemens control and a large 10" touchscreen Control of saw blade height/tilt and positioning of the parallel fence via the control panel Max. cutting height 200 mm Scoring unit with separate drive motor Dsdpfx Aovmfawsi Eswd Main saw blade with belt drive and speeds of 2800/3665/4800 rpm High self-weight ensures vibration-free operation Large cantilever table with material roller Extendable aluminum rip fence with three folding stops and digital position display 7.5 kW main motor mounted on a robust cast iron frame Four-bearing format sliding table with double roller carriage made of anodized aluminum with high torsional rigidity Multiple locking on the sliding table Standard equipment includes table extension and table lengthening made of steel sheet Large pendulum guard can be easily raised using a gas spring Saw blade clamping via a tool-free rapid clamping system The panel saw is assembled in our demonstration center in Chemnitz. It is new and in unused condition. We will be happy to assist with transport, assembly, and training.