Used Voltage Regulator for sale (24)

Condition: new, Year of construction: 2024, functionality: fully functional, fuel type: diesel, power: 50 kW (67.98 HP), total length: 2,300 mm, total width: 1,050 mm, total height: 1,450 mm, rotational speed (max.): 1,500 rpm, No minimum price – guaranteed sale to the highest bidder! Diesel generator, NEW! TECHNICAL DETAILS Generator set Model: HPYU04050 Rated power: 50 kW / 63 kVA Altitude: ≤ 1,000 m Voltage: 400 V Current: 79.39 A Frequency: 50 Hz Speed: 1,500 rpm Dimensions: 2,300 x 1,050 x 1,450 mm Weight: 1,350 kg Noise level LP7m: ≤ 68 dB Fuel consumption at 100% load: ≤ 205 g/kWh Diesel engine Manufacturer: Yunnei Euro5 Rated power: 50 kW Engine model: DEF30CZJA5 Number of cylinders: 4 Bore x Stroke: 95 x 105 mm Displacement: 3.0 l Starting system: 12 V DC electric start Cooling: water-cooled Intake: naturally aspirated Overload capacity: 110 % Compression ratio: 17.5 ± 1 : 1 Speed: 1,500 rpm Generator Manufacturer: HELVETICA POWER Model: HP 224E Rated power: 50 kW / 63 kVA Voltage: 230 V / 400 V Frequency: 50 Hz Protection class: IP23 Power factor: cos φ = 0.8 MACHINE DETAILS Voltage and frequency regulation Static voltage regulation: ≤ ±1 % Voltage fluctuation rate: ≤ ±0.5 % Transient voltage regulation: +20 % / -15 % Voltage settling time: ≤ 1 s Static frequency regulation: ≤ ±1 % Frequency fluctuation rate: ≤ ±0.5 % Transient frequency regulation: +10 % / -7 % Frequency stabilization time: ≤ 3 s Dimensions & Weight Dimensions (L x W x H): 2,300 x 1,050 x 1,450 mm Weight: 1,350 kg EQUIPMENT Super-silent design Remote control Oil and water heater ATS (Automatic Transfer Switch) Plastic film and tarpaulin cover Brushless Stamford replica, 100% copper Three-phase four-wire system Fsdpfx Apozi D Ihewjgf AVR, automatic voltage regulator TDI turbocharger Electronic speed governor

Condition: new, Year of construction: 2025, functionality: fully functional, fuel type: diesel, power: 100 kW (135.96 HP), total length: 2,600 mm, total width: 1,150 mm, total height: 1,450 mm, rotational speed (max.): 1,500 rpm, No minimum price – guaranteed sale to the highest bidder! Diesel generator, NEW! TECHNICAL DETAILS Model: HP100S1ASR Rated power: 100 kW / 125 kVA Altitude: ≤ 1,000 m Voltage: 400 V Current: 180.43 A Frequency: 50 Hz Speed: 1,500 rpm Noise level LP7m: ≤ 68 dB Fuel consumption at 100% load: ≤ 225 g/kWh Diesel engine Fgodjzi D Ibjpfx Apwsf Manufacturer: Ricardo Kofo Engine model: 4RT55-110D Rated power: 110 kW Number of cylinders: 4 Bore x Stroke: 110 x 140 mm Displacement: 5.32 l Starting system: 24 V DC electric start Cooling: water-cooled Intake: naturally aspirated Overload capacity: 110% Compression ratio: 17 : 1 Speed: 1,500 rpm Generator Manufacturer: HELVETICA POWER Model: HP274D Rated power: 100 kW / 125 kVA Voltage: 230 V / 400 V Frequency: 50 Hz Protection class: IP23 Power factor: cos φ = 0.8 MACHINE DETAILS Voltage and frequency regulation Static voltage regulation: ≤ ±1 % Voltage fluctuation rate: ≤ ±0.5 % Transient voltage regulation: +20 % / -15 % Voltage settling time: ≤ 1 s Static frequency regulation: ≤ ±1 % Frequency fluctuation rate: ≤ ±0.5 % Transient frequency regulation: +10 % / -7 % Frequency stabilization time: ≤ 3 s Dimensions & Weight Dimensions (L x W x H): 2,600 x 1,150 x 1,450 mm Weight: 1,495 kg EQUIPMENT Super-silent design Remote control CEE sockets Fuses ATS (Automatic Transfer Switch) Plastic film and tarpaulin cover Brushless Stamford replica, 100% copper Three-phase, four-wire system AVR (Automatic Voltage Regulator) Direct injection Electronic speed governor

Condition: new, Year of construction: 2025, functionality: fully functional, power: 80 kW (108.77 HP), total length: 2,500 mm, total width: 1,150 mm, total height: 1,300 mm, rotational speed (max.): 1,500 rpm, No minimum price – guaranteed sale to the highest bidder! Diesel generator, NEW! TECHNICAL DETAILS Rated power: 80 kW / 100 kVA Voltage: 400 V Current: 144.34 A Frequency: 50 Hz Speed: 1,500 rpm Noise level LP7m: ≤ 68 dB Fuel consumption at 100% load: ≤ 225 g/kWh Diesel engine Manufacturer: Ricardo Kofo Rated power: 88 kW Engine model: 4RT55-88D Number of cylinders: 4 Bore x Stroke: 110 x 140 mm Displacement: 5.32 l Starting system: 24 V DC electric start Cooling: water-cooled Intake: naturally aspirated Overload capacity: 110% Compression ratio: 17:1 Speed: 1,500 rpm Generator Manufacturer: HELVETICA POWER Model: HP274C Rated power: 80 kW / 100 kVA Voltage: 230 V / 400 V Frequency: 50 Hz Protection class: IP23 Power factor: cos φ = 0.8 MACHINE DETAILS Voltage and frequency regulation Static voltage regulation: ≤ ±1% Voltage fluctuation rate: ≤ ±0.5% Fjdpfxezi Dpfo Apwogf Transient voltage regulation: +20% / -15% Voltage settling time: ≤ 1 s Static frequency regulation: ≤ ±1% Frequency fluctuation rate: ≤ ±0.5% Transient frequency regulation: +10% / -7% Frequency stabilization time: ≤ 3 s Dimensions & Weight Dimensions (L x W x H): 2,500 x 1,150 x 1,300 mm Machine weight: 1,410 kg EQUIPMENT Super-silent version Remote control CEE sockets 400 V - 63 A, 32 A, 16 A Socket 230 V - 16 A ATS, automatic mains transfer switch Plastic film and tarpaulin cover Brushless Stamford replica, 100% copper Three-phase, four-wire system AVR, automatic voltage regulator Direct injection Electronic speed governor

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 540 mm, total length: 920 mm, total height: 760 mm, fuel: diesel, rotational speed (min.): 3,000 rpm, power: 7.7 kW (10.47 HP), No minimum price – guaranteed sale to the highest bidder! Emergency generator, NEW! TECHNICAL DETAILS Power: 7.7 kW Rated power: 9 kVA Fgsdpfx Aezi Dgwspwof Maximum speed: 3,000 rpm Noise level: 71 dB MACHINE DETAILS Cooling type: Air-cooled Fuel: Diesel Output voltage: 400 V Output current: 13 A Output frequency: 50 Hz Type of output current: Three-phase Dimensions & Weight Dimensions L x W x H: 920 x 540 x 760 mm Total weight: 159 kg FEATURES CE-compliant Electric starter (e-start) Noise-reduced, silent version AVR system, automatic voltage regulation Air-cooled Tank for at least 8 hours of operation under full load

Condition: new, Year of construction: 2024, functionality: fully functional, fuel type: diesel, power: 100 kW (135.96 HP), total length: 2,900 mm, total width: 1,150 mm, total height: 1,600 mm, No minimum price – guaranteed sale to the highest bidder! Diesel generator, NEW! TECHNICAL DETAILS Power: 100 kW (135.96 hp) Rated power: 125 kVA Maximum speed: 1,500 rpm Emission class: Euro 5 Engine manufacturer: Yunnei MACHINE DETAILS Cooling type: Water-cooled Fuel type: Diesel Output current: 180 A Output voltage: 400 V Output frequency: 50 Hz Fgsdpfjzi Dfyjx Apwef Type of output current: Three-phase Dimensions & Weight Dimensions L x W x H: 2,900 x 1,150 x 1,600 mm Total weight: 1,610 kg EQUIPMENT Oil and water heater Sound-insulated, super-silent design CE compliant 100% copper alternator Emergency power switch / ATS automatic transfer switch unit for emergency power operation Digital control + built-in remote control Yunnei Stage V diesel engine for continuous operation Type Stamford license CN: CE-certified, high-quality synchronous alternator, brushless, with 100% copper winding AVR system, load-dependent voltage regulation / Automatic Voltage Regulation

Condition: used, mileage: 314,000 km, power: 294 kW (399.73 HP), first registration: 04/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, tail-lift, We are very pleased that our offer has caught your interest and can already assure you that you will be able to purchase a high-quality and reasonably priced vehicle with a fully documented service history from our company! MB ACTROS 2540 COMPLETE TRUCK with certified BÖSE sliding wall superstructures Rear cargo securing Fgjdpfx Aow R Ipyopwof 2 x BÄR tail lifts, 2,500 kg each Trailing steering axle Retarder Special equipment: Front axle load 8.0 t, driver’s side airbag, work lights, audio system: CD radio comfort (Bluetooth), exhaust outlet downwards right, standard and DuoMatic brake connections, compressed air connection in cab, high-pressure air system, air horn, electrical and lighting for swap-body frames, cab: with air suspension, tinted windshield, vehicle without trailer coupling, info display 12.7 cm with video function, 3-piece mudguard, aluminium fuel tank: 290 L, coolbox/refrigerator, alloy rims 9.00x22.5 (ALCOA matte), roof air deflector (adjustable), 2-cylinder air compressor, reinforced engine brake, steered trailing axle, tire pressure monitoring system, retarder, acoustic reverse warning (external signal), tail lift switch, reinforced rear cross member, fleet management interface, automatic circuit breaker, cab seats: co-driver armrest, cab seats: comfort driver's suspension seat, external sun visor, sun blind side window, driver’s door, 12V socket in passenger footwell, additional 12V socket, 24V/25A socket in passenger footwell, 24V socket in right storage compartment, automatic daytime running lights, preparation for rear-view camera Additional features: Emissions standard EURO 6, axle configuration: 6x2, Actros 4, trailer brake 2-line, connections left, trailer socket 24V / 15-pin, electrically adjustable and heated exterior mirrors, rear axle differential lock, steel compressed air tanks, driver assistance system: Attention Assist (drowsiness detection sensor), driver assistance system: Brake Assist (Active Brake Assist), driver assistance system: Lane Keeping Assist, cab width: 2.30 m, cab: L StreamSpace, cab floor with 320 mm engine tunnel, suspension: full air suspension, electric windows, generator 100A, 12-speed gearbox type G 211-12, AdBlue tank 60 L, rear axle crown wheel 440, bodywork/chassis: chassis, lower comfort bunk, comfort central locking, communication interface, radiator grille blind, regulated power steering pump, engine 10.7 L - 290 kW R6 diesel (OM 470), engine compartment encapsulation, single tires on trailing axle, step mirror, residual heat utilization, disc brakes front and rear axle, seat upholstery: fabric, cab seats: co-driver function seat, cab seats: foldable driver backrest, voltage converter 24V/12V 10A, front splash protection, front axle stabilizer, additional stabilizer rear/trailing axle, exterior stowage flap left, 24V socket in cab, tachograph / EC recording device, cab door extension, aerodynamically shaped underbody fairing, front underride protection, CB radio pre-installation, road charge detection prep, cranked front axle, regulated water pump, gross vehicle weight 25.00 t, additional (water) heater GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We organize your registration and the export documents / EUR 1 and manufacturer’s declaration for export purposes. FINANCING Upon request, we are happy to provide you with a leasing, hire-purchase, or financing offer. SERVICE TÜV inspection / general inspection

Condition: good (used), Electromechanical actuator for valves, valve drive, actuator, servo motor, air flap actuator, air flap actuator motor, gas pressure regulator, electro-hydraulic drive -Manufacturer: Deufra, electric actuator, rotary actuator -Type: ASP 25 -Voltage: 400 V / 0.03 kW -Dimensions: 490/310/H175 mm -Weight: 15.6 kg Fgjdpsyik Uyjfx Apwef

Condition: excellent (used), Electromechanical actuator for valves, valve drive, actuator, servomotor, air flap servomotor, air flap servomotor, gas pressure regulator, valve actuator -Manufacturer: Siemens/Landis & Gyr, electrohydraulic drive unused OVP Fgodpfx Apjghiahewjf -Type: SKP20.110B27 -Voltage: 220-240 V -Number: 1x drive available -Price: per piece -Dimension box: 250/150/H110 mm -Weight: 1.8 kg/Stück

Condition: used, Power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, AC/DC power supply, primary switching regulator -Manufacturer:Konzept, 24V DC primary switching regulator Competent NSP 2410-1 Fjdpfjt Sa U Nox Apwsgf -Input voltage: 230 VAC -Quantity: 1x module available -Dimensions: 205/110/H90 mm -Weight: 1.0 kg

Condition: good (used), Potentiometer, dual potentiometer, regulator, controller, level regulator, control Fgodpfoxyf Iwex Apwjf Manufacturer: Elvo, Regulator Controller -Type: COF2AC -Voltage: 115-230 V 50-60 Hz -Number: 2x controllers available Price: per piece -Dimensions: 265/160/H90 mm -Weight: 1 kg/pc.

Condition: used, Fieldbus, Profibus, SPS control, automation technology, controls and regulators, bus coupler, logic bus terminal, input terminal -Manufacturer: Beckhoff, bus terminal 4-channel digital input Fedjhu Ddzepfx Apwogf -Type: KL 1904 -Rated voltage: 24VDC -Number: 5x clamp available -Price per piece -Dimensions: 67/15/H100 mm -Weight: 0.1 kg/pc.

Condition: used, Electromechanical actuator for valves, valve drive, actuator, servomotor, air flap servomotor, air flap servomotor, gas pressure regulator, valve actuator -Manufacturer: Siemens/Landis & Gyr, electrohydraulic drive unused OVP -Type: SKL90.110C27 -Voltage: 220-240 V -Number: 3x drive available -Price: per piece -Dimension box: 250/150/H110 mm Fedeghibmjpfx Apwogf -Weight: 1.8 kg/piece

Condition: good (used), EA Elektro Automatik Type: EA-EL 9080-200 EA Elektro-Automatik Electronic Load (2.4kW) 0-80V 0-200A Technical Data: Mains Input: Mains voltage switchable 115V/230V Mains frequency 50/60Hz Mains fuse T2.5A DC Input: Input voltage U nominal 0…80V Input power P nominal 0...2400W, with temperature-dependent derating Continuous power 1500W at 20°C ambient Input current I nominal 0…200A Overvoltage protection limit 1.1 * U nominal Maximum permissible input voltage 100V Voltage regulation: Setting range 0…80V Display resolution 100mV Fodpfjzhkcisx Apwjgf Accuracy

Condition: ready for operation (used), Year of construction: 2021, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, controller manufacturer: MicroStep, controller model: iMSNC, number of axes: 3, This 3-axis MicroStep 3001.15P/ME plasma cutting machine was manufactured in 2021. It features a working area of 1500x3000mm, ideal for precise and large-scale cutting tasks. If you are looking to get high-quality cutting capabilities, consider the MicroStep 3001.15P/ME machine we have for sale. Contact us for more information. MasterCut Compact 3001.15P/Me Approx. 3,000 x 1,500 mm Sturdy construction Up to 100 mm material thickness High-quality linear guides and backlash-free drive on both sides Digital, maintenance-free AC servos with IRC Up to 40,000 mm/min IRC 2500 (incremental encoder) • Permissible plate thickness: stable construction up to 100 mm material thickness • Guides/Drives: high-quality linear guides and double-sided clearance-free drive • Axis control: digital, maintenance-free AC servos with IRC • Positioning speed: up to 40,000 mm/min • Measuring system: IRC 2500 (incremental encoder) • CNC control: MicroStep iMSNC with integrated network card • Plasma power source: Hypertherm XPR170 • Gas console: automatic Core gas console • Table surface: grid cover in the cutting table • Height control: "THC" module for automatic height regulation via arc voltage • Marking unit: "MicroPunch" needle marking unit • Safety features: double-sided rope safety system (collision protection) for the gantry via Emergency Stop • Visual signaling: 2-color LED signal tower on the gantry bridge Fgodpfxjycvq Aj Apwsf • Operation interface: externally standing MMI console • Connectivity: USB 3.0 port for storage media • Software: AsperWin Basic (2D programming) and AsperWin Nesting (automatic nesting)

Condition: new, Wood briquetting press Amis ABP 60 L -Exhibition machine- ----- Technical data ----- Briquette Ø: 60 mm, Hydraulic unit 3 kW: 140 bar, Voltage: 400 V, frequency: 50 Hz, Fuse protection: 16 A, Capacity approx.: 20-35 kg/h, Weight approx.: 300 kg - Easy handling - Hydraulic control - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) - Motor equipped with motor protection switch and emergency stop - No electronic components such as regulators, sensors and sensors or complicated controls - Large storage container - Tempered briquette tongs - Replaceable press bar - Pressing without the addition of additives - Thanks to the pre-compressor, even voluminous chips can also be processed - No adjustment work or pressure monitoring of the pressure necessary Fodpju R Sxxjfx Apwsgf - New exhibition machine -

Condition: new, Year of construction: 2026, The CNC plasma burner with a water table is a device designed for shape cutting of elements from a sheet of metal (in any shape). This machine is characterized by extreme simplicity and ease of use. Our CNC cutter guarantees repeatability and high cutting accuracy (0.1 mm), thanks to which burnt shapes can be transferred directly to the next stage of production. The water table ensures low consumption of consumables, raw materials and low gas emissions. No need to use fume and flue gas extraction. Why is it worth it? water table no need to use smoke and fumes extraction small size of the machine allows it to be placed anywhere THC voltage height adjuster precise setting of the torch a very precise cut requiring no further processing plate detection system convenient control panel intuitive machine operation can cut and gouge steel machine training at the buyer's/seller's premises a library of standard geometric shapes Characteristics and equipment Workspace 1500 x 3000 Y axis range 140 mm (clearance) Fodsg Nknyopfx Apwegf The use of a rigid and stable structure Water Table Voltage height regulator Torch height adjustment system Torch height and stabilization sensor FastCAM program - in Polish with a license USB port and internal and external memory Friendly user interface - simple operation even for people who have never worked in programs like FastCAM Import of drawings in *.txt format from any type of program (e.g. AutoCAD, SolidWorks, etc.) MAKRO – a library of standard geometric shapes. This allows you to create figures without having to draw. NESTING – automatic arrangement of elements on the sheet DEMO - Shows the work cycle (path) without turning on the plasma or oxygen source The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, pressing force: 40 t, table width: 1,000 mm, table length: 600 mm, Hidrobrasil Double Column Press – 40 t – 1,000 × 600 mm – Stroke 500 mm For sale is a hydraulic double column press (H-frame) manufactured by Hidrobrasil, featuring an adjustable pressing force from 6 to 40 t. This machine is designed for calibration, assembly, and small series applications, and stands out thanks to its compact design, robust guidance system, and precise control. Ideal for flexible production processes with changing requirements. ==== Technical data & information: Hydraulic Double Column Press – 40 t ==== General information - Manufacturer: Hidrobrasil - Model: Double Column Press - Design: H-frame / Double Column Press - Designation: Small Batch Press / Calibration Press - Pressing force: 6–40 t (adjustable) - Machine weight: approx. 3,500 kg - Dimensions (L × W × H): approx. 2,100 × 1,600 × 3,500 mm ==== Working area - Max. installation height: 700 mm - Stroke: 0–500 mm (adjustable) - Table height above floor: 800 mm ==== Table & Slide - Table size: 1,000 × 600 mm - Slide area: 1,000 × 600 mm - Guide columns: Ø 100 mm (4 units) - T-slots and holes: as per customer specification ==== Speeds - Rapid traverse speed: 80 mm/s - Pressing speed: 9 mm/s - Return speed: 90 mm/s ==== Hydraulics & drive - Hydraulic pump: ASC, 67 + 8 l/min - Motor power: 4 kW - Total connected load: approx. 6 kW - Operating pressure: max. 260 bar - Pressure accuracy: ± 5 bar - Hydraulic manifold and valves: Duplomatic - Air and oil filters: Filtrec - Electronic oil level switch - Air cooling for hydraulic system - Pressure adjustment via pressure switch - Hydraulic unit mounted at top rear ==== Control & Safety - Control via sensors - Safety light sensors - Safety cover (door) at rear - Work area interior lighting - Pressure display via manometer ==== Electrical - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Components: Siemens, Allen Bradley, SICK Fedpfexrby Hox Apwogf ==== Electrical cabinet - Protection class: IP54 - Spare capacity: approx. 30% - Cooling: air cooling - Interior lighting: fitted - Operating mode selector: lockable ===== Calibration, assembly work, small batch production, forming technology, flexible production Hydraulic press, double column press, H-frame press, calibration press, assembly press, industrial press Looking for a hydraulic press tailored to your application? Contact us for a customised offer. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the Brazilian national safety standard NR 12, which builds upon these. Our key strength lies in special-purpose machine engineering and press automation. We supply customised hydraulic presses at surprisingly competitive prices. All presses are equipped with hydraulic components primarily from leading European manufacturers.

Condition: new, Year of construction: 2021, pressing force: 10 t, Single-column press – Manufacturer Hidrobrasil – 10 t Assembly press – Table 600 × 300 mm For sale is a hydraulic single-column press (C-frame) from the manufacturer Hidrobrasil with a pressing force of up to 10 t. The machine is designed for continuous shift operation and impresses with its robust construction, reliable hydraulic components, and flexible application possibilities in assembly and pressing processes. ===== Technical data + information: Hydraulic single-column press – 10 t ==== General information - Manufacturer: Hidrobrasil - Model: Single-column press / Assembly press - Design: C-frame press / Single-column press - Pressing force: max. 10 t (100 kN) - Machine weight: approx. 1.2 t - Dimensions (L × W × H): approx. 1,100 × 600 × 1,850 mm - Table height: 850 mm - Control sides: 1 ==== Working area - Max. opening width: 400 mm - Stroke: 350 mm ==== Table & Ram - Table plate: 600 × 300 mm - Ram plate: 300 × 300 mm - Design: with T-slots and central cylinder tension ==== Speeds - Forward speed: 0 – 10 mm/s - Return speed: up to 25 mm/s - Pressing speed: 0 – 10 mm/s ==== Hydraulics - Number of cylinders: 1 - Operating pressure: max. 250 bar - Pressure accuracy: ± 5 bar - Pump: Gear pump, approx. 6 l/min - Oil volume: approx. 80 l (HLP 46) ==== Drive & Electrical System - Motor power: 2.2 kW - Total connected power: approx. 3 kW - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz ==== Equipment & Operation - Pressure setting via rotary control (0.5 – 10 t) - Cable remote control for upward and downward movement - Oil temperature display - Control cabinet cable: 3,000 mm cable with 16 A plug - Machine body powder-coated / double-coated ==== Control & Components - Control system: Siemens - Hydraulic components: Bosch Rexroth ==== Design & Safety Fedpfjhaqygex Apwegf - Robust machine body according to DIN 8651 - Cylinder induction-hardened and chrome-plated - CE certificate available - Documentation in German - Low maintenance and reliable - Complies with current EU directives ===== Assembly work, pressing work, small series production, workshop applications, light forming technology Single-column press, C-press, hydraulic press, workshop press, pressing press, industrial press, tool tryout press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German Machinery Directives as well as European Machinery Directives (Directive 2006/42/EC), the EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety regulation NR 12, which is based on these. Our strength lies in special machine construction and press automation. We distribute customized hydraulic presses at surprisingly affordable prices. For the hydraulics of the presses, components from leading European manufacturers are mainly used.

Condition: new, Year of construction: 2021, pressing force: 17 t, Here are the technical data of the offered machine: If the press does not exactly match your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: Hydraulic 17 T single column press Single column press with 17 T capacity, suitable for continuous shift operation, with these basic data: Fsdogrki Sopfx Apwogf a) Traversing speed 10 mm/sec. downwards, b) opening speed up to 25 mm/sec c) starting pressing speed 10 mm/sec. d) table size 400x400 mm e) ram size 200x200 mm, with T grooves and central cylinder clamping f) Overall size approx. 1150x800x1750 mm g) oil temperature display on oil tank h) pressure adjustment from 5 T to 17 T ( adjustable by knob ) i) Hand lever operation with two speeds j) Machine body powder-coated, or double-painted k) Control cabinet supply line from above with 3000 mm cable and 16 Ampere plug l) assembly, commissioning, instruction against separate calculation Press design Single column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Press force max. ( at 250 bar ) 170 kN Free ripping force max. 10 kN Pressure build-up time Closed die Steel to steel Max. 2 sec. Dimensions Max. Opening width 250 mm Stroke and min. opening 100 mm Table height above floor 850 mm Height above floor (headroom) approx. 2200 mm Hall height min. 2.500 mm parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.3 mm/m Weight Total weight of press without operating materials approx. 1 to Speeds Fast closing with 10 mmSec. Press speed 10 - 0 mmSec Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders 1 pcs. Operating pressure max. 250 bar Pressing pressure build-up time . 2 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump Gear pump approx. 6 L/min Oil volume approx. HLP 46 MW 100 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Electrical system Main supply 400 V AC Control voltage hydraulic pumps 24 24 V DC V DC Frequency 50 Hz Hydraulic connection Main motor 2.2 kW Total connection Approx. 3 kW Design The press is designed as an oil-hydraulic single-column press. The hydraulic system and the tank are located on the top and inside of the press, respectively. Hydraulic unit The hydraulic system is mounted on the top of the press. Safety devices For the scope of delivery described, the press complies with the valid safety regulations according to UVV, as well as with the standards and directives valid for the EU, in each case in the latest version. Electrical system / control system The control cabinet with control, power and safety components is located on the right side of the press. The press is operated by a hand lever control.

Condition: new, Year of construction: 2025, pressing force: 20 t, Straightening Press – Manufacturer Durendus – DCS-20 – 5–20 t C-Frame Single-Column Press – Table 500 × 600 mm For sale is a compact single-column straightening press (C-frame) from Durendus, model DCS-20, equipped with an adjustable pressing force from 5 to 20 t. The machine features a table size of 500 × 600 mm, a maximum installation height of 700 mm, and boasts a robust, low-maintenance design, making it ideal for straightening, assembly, and press-fit operations. ===== Technical Data & Information: Straightening Press Durendus DCS-20 – 5–20 t Single-Column Press ==== General Information - Manufacturer: Durendus - Model: DCS-20 Fedpfsyghvfjx Apwsgf - Design: Single-column press / C-frame - Pressing force: 5 – 20 t (adjustable) - Machine weight: approx. 1,900 kg - Dimensions (W × D × H): 1,150 × 1,250 × 2,469 mm ==== Working Area - Installation height: max. 700 mm - Stroke: 0 – 500 mm (adjustable) - Table height: 800 mm ==== Table and Ram - Table size: 500 × 600 mm - Ram size: 500 × 600 mm - T-slots: DIN 650 – 18 mm (or per customer specification) ==== Hydraulic Cylinder - Cylinder diameter: Ø 100 mm - Piston rod diameter: Ø 60 mm - Operating pressure: max. 250 bar - Return speed: 50 mm/s - Idle speed: 25 mm/s - Pressure build-up time: max. 2 s (steel on steel) ==== Hydraulics - Hydraulic pump: Rexroth, 11 l/min - Motor power: 4 kW - Oil tank volume: 150 l - Hydraulic block / valves: Hydropack - Filter: Filtrec - Oil level monitoring: electronic oil level switch - Hydraulic unit: mounted top rear - Pressure accuracy: ± 5 bar ==== Electrical - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Connected load: approx. 4 kW ===== Straightening work, assembly work, press-fit operations, workshop applications, maintenance, small-batch production Straightening press, single-column press, C-frame press, hydraulic press, workshop press, assembly press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured in compliance with German machinery guidelines, as well as European Machinery Directive 2006/42/EC, EC standards, and EU safety regulations. Additionally, our presses exceed Canadian and European safety requirements by fully complying with Brazil's national safety standard NR 12, which is based on these requirements. Our greatest strength is special-purpose machine construction and press automation. We offer tailor-made hydraulic presses at surprisingly attractive prices. For the hydraulics, we predominantly use components from leading European manufacturers.

Condition: like new (used), Year of construction: 2024, pressing force: 200 t, Portal Straightening Press – Manufacturer: Hidrobrasil – 200 t Gantry Press – Table 4,000 × 2,000 mm For sale is a versatile portal straightening press from Hidrobrasil featuring a pressing force of 200 t. The machine is equipped with a large table area of 4,000 × 2,000 mm, a laterally movable cylinder, and a longitudinally adjustable bridge structure, making it ideal for large-format straightening, assembly, and special applications. ==== Technical Data + Information: Portal Straightening Press Hidrobrasil – 200 t Gantry Press ==== General Specifications - Manufacturer: Hidrobrasil - Model: Portal Straightening Press - Design: Gantry press - Pressing force: 200 t - Operating pressure: max. 285 bar ==== Working Area - Table size: 4,000 × 2,000 mm - Clear width / height: 1,500 mm - Column spacing: 2,050 mm - Stroke: 1,500 mm ==== Movements & Travel Paths - Lateral cylinder adjustment: max. 1,450 mm - Longitudinal bridge movement: max. 2,800 mm - Approach speed: 20 mm/s - Working speed: 2 mm/s ==== Construction & Equipment - Hydraulic power unit mounted on top of the press - Hydraulic block and valves by Bosch Rexroth - Air and oil filters by Filtrec - Combination air and water cooling - Stroke cylinder integrated in the worktable - Machine control via wireless remote (2-button system) - Anti-rotation device for the cylinder - Machine status and diagnostics system with touchscreen ==== Auxiliary Stroke Cylinder System - Number of stroke cylinders: 10 units - Rod diameter: 25 mm - Stroke: 80 mm - Controlled via hydraulic system or control unit ==== Control & Operation - Siemens PLC: S7-1200 - Siemens Touchscreen: KTP900 – 9" - Up to 99 programs storable - Functions: - Setting stroke, pressure, and hold time - Decompression time - Piece counter - Alarm management - Real-time monitoring of all parameters - Positioning accuracy: ± 0.1 mm ==== Safety & Monitoring - Emergency stop system - Two-hand/wireless operation with safety release - Safety stripe on gantry columns - Hydraulic oil temperature monitoring - Automatic shutdown at overtemperature (> 65°C) - Filter monitoring - CE compliant ==== Hydraulics - Main drive power: 5.5 kW - Oil volume: not supplied - Oil temperature control with automatic cooling ==== Electrical Fgsdpfxexrb Nbj Apwjf - Main supply: 400 V AC - Control voltage: 24 V DC - Components: Siemens, Allen Bradley, Phoenix ===== Straightening work, large components, assembly work, special purpose machine construction, steel construction, maintenance, press-fitting applications Gantry press, straightening press, hydraulic press, industrial press, special machine, tool matching press, tryout press, tool tryout press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German Machinery Guidelines as well as European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements, as they comply with all aspects of the Brazilian national safety guideline NR 12, which builds upon them. Our core expertise lies in special purpose machine construction and press automation. The hydraulic systems of our presses primarily utilize components from leading European manufacturers.

Condition: used, mileage: 769,300 km, power: 290 kW (394.29 HP), first registration: 06/2016, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Mercedes Benz 1840 ANTOS - Leaf/Air - M Classic Space - Air Conditioning - Retarder - Good Condition * Chassis Number: WDB96340310XXXXX - First Owner - German Vehicle - * Diesel - Displacement: 10,677 cc - 290 kW / 400 hp - Euro 6 - Green Sticker - * Tire Sizes: Front Axle: 315/70 R 22.5 Rear Axle: 315/70 R 22.5 * Vehicle immediately available and ready for pickup - * Please arrange an appointment to view the vehicle - * Contact Person: Mr. Andreas Vogel * The information provided online is non-binding. * It does not represent guaranteed properties. * The seller is not liable for typographical or data transmission errors. * Subject to changes, errors, and prior sale. Special features: Fjdpfxsxgldfe Apwsgf Work lights, audio system: CD radio, exhaust facing down to the right, 220 Ah battery, compressed air connection in the cab, aluminum compressed air tank, additional compressed air tank, electrical preparation in the cab 24V/100A, driver assistance system: Attention Assist (drowsiness detection sensor), cab: steel suspension, comfort, 10.4 cm info display with additional display, integral rear, communication interface, front engine PTO with Frigoblock preparation, reinforced engine brake, configurable special module, retarder, fifth wheel coupling, low-maintenance, automatic circuit breaker, seats in the cab: driver's seat with comfort suspension, voltage converter 24V/12V 10A, additional 24V socket in the passenger footwell, preparation/switch for lifting axle on the semi-trailer/trailer, CB radio preparation, additional heating (water), transmission oil cooler Further features: EURO 6 emissions standard, axle configuration: 4x2, axle load front axle 7.5 t, trailer socket 24V / 15-pin, Antos, exterior mirrors electric. adjustable and heated, rear axle differential lock, medium compressed air unit, driver assistance system: brake assist (Active Brake Assist), driver assistance system: lane departure warning, driver's cab: width 2.30 m, driver's cab: hydraulic tilting system, driver's cab: M ClassicSpace, driver's cab: reinforced (Sweden), driver's cab floor with engine tunnel 320 mm, suspension: leaf/air, suspension: aluminum front spring bracket, suspension: 7.5 t front springs, 2 leaves, electric windows, tinted windshield, 100 A generator, 12-speed gearbox - type: G 211-12, urea tank (AdBlue): 60 L, manual lifting roof (steel), rear axle crown gear 440, body/structure: semitrailer tractor, comfort locking system, 3-part fender, fuel tank: 390 L aluminum, unregulated power steering pump, air intake from the front, engine 10.7 Ltr. - 290 kW R6 diesel (OM 470), engine compartment encapsulation, wheelbase 3700 mm, ramp mirror, spare wheel, residual heat utilization, disc brakes front and rear axle, seat cover / upholstery: fabric, seats in the driver's cab: passenger function seat, splash guard front, stabilizer front axle, 24V driver's cab socket, tachograph / EC control device, underbody paneling aerodynamically shaped, underrun protection at the front, preparation for toll collection, front axle offset, water pump regulated, permissible total weight 18.00 t

Condition: new, Year of construction: 2026, functionality: fully functional, Universal cooling system designed for milling machines, band saws, drilling machines and lathes. A wide range of applications Possibility mounting with a o lot of devices Simple handling Silent and efficient electric motor Removable coarse filter Regulated elastic spout Technical parameters MOTOR POWER 25 W VOLTAGE 230 V Fgedpfjvuzwusx Apwjf PUMP EFFICIENCY 240 l/h TANK CAPACITY 13 l TUBE LENGHT 2,6 m CASE OF IP CLASS IP 44 DIMENSIONS 370x320x260 mm WEIGHT 7 kg

Condition: new, Year of construction: 2026, pressing force: 200 t, DHS-200 – 200 T Hydraulic Heated Press – Sliding Table – Heating Plates 800 × 800 mm For sale is a DHS-200 hydraulic heated press with a pressing force of 200 T and an extendable sliding table system. The machine features heating plates measuring 800 × 800 mm, an open height of 800 mm, as well as a hydraulic stroke of 600 mm, making it particularly suitable for laminating, molding, and thermal press processes with temperature-controlled tooling. ==== Technical Details & Information: Hydraulic Heated Press DHS-200 – 200 T ==== General Specifications - Design: Hydraulic heated press with sliding table - Pressing force: 200 T - Table usable area: 800 × 800 mm - Heating plates: 800 × 800 × 95 mm - Open width: 900 mm - Open height: 800 mm - Extendable table: 800 mm - Table height: 900 mm - Overall dimensions (W×D×H): 2,150 × 2,050 × 2,850 mm - Total weight: approx. 9,800 kg - Machine frame: welded steel construction ==== Hydraulic Cylinder - Piston stroke: 600 mm - Piston rod Ø: 380 mm - Cylinder Ø: 180 mm - Max. operating pressure: 260 bar ==== Hydraulic Power Unit - Return speed: 22 mm/s - Idle speed: 10 mm/s - Hydraulic pump: ASC - Pump capacity: 42 l - Motor power: 7.5 kW - Hydraulic power unit: mounted beside the press - Hydraulic manifold / valves: Duplomatic - Air cooling - Adjustable pressure - Manual limit sensors - Cam switch for stroke limitation - Passive pressure maintenance for up to 60 minutes ==== Heating System - Electrically heated steel plates - Heating capacity: 27 kW - Temperature range up to 250 °C - Temperature sensors: 2 per heating plate - Temperature fluctuation: approx. 5–10 °C ==== Controls - Two-hand operation Fgsdpfoyuvrdsx Apwjf - Ram return via control button - Stroke limitation via cam switch - Pressure adjustment via control valve - CE certificate and user manual included ==== Electrical Connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Heating elements per plate: 18 units - Total heating power: 27 kW - Hydraulic motor connection: 7.5 kW - Total connected load: approx. 40 kW ===== Plastics processing, laminating processes, composite materials, rubber and elastomer processing, compression molding, thermal pressing processes, hot-pressing applications Hydraulic press, hydraulic heated press, heated press, sliding table press, 200 ton press, 200 T press, laminating press, plastics press, molding press, vulcanizing press, tryout press, tool tryout press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured in compliance with German machine directives, the European Machinery Directive (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements, as they also fully comply with the national Brazilian safety standard NR 12, which builds upon these. Our core competence is special-purpose machine construction and press automation. We offer tailor-made hydraulic presses at surprisingly affordable prices. For the hydraulics of our presses, we mainly use components from leading European manufacturers.

Condition: good (used), Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature Range: -70°C to +180°C Temporal Temperature Deviation: ± 0.1 to ± 0.5 K Spatial Temperature Deviation: ± 0.5 to ± 2.0 K Temperature Change Rate (Cooling): 5.0 K/min Temperature Change Rate (Heating): 6.5 K/min Thermal Compensation at +20°C: 3000 W Thermal Compensation at -20°C: 3000 W Test Chamber Dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External Dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Fgodszg Tpijpfx Apwsf Test Chamber Volume: 335 liters Rated Voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated Power: 10 kW, Rated Current: 21 A Sound Level at 1m Distance (Free Field Measurement): < 69dB (A) Side Access: 5.5 cm / 12.5 cm Chamber is water-cooled Refrigerant: R-404A and R-23 Weight: approx. 570 kg For your safety as a buyer, please note the following information: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. Refilling with refrigerants compliant with legal regulations 3. After successful inspection, the chambers undergo a test run, which is monitored with calibrated equipment. Condition: used Scope of Supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.