Used Voltage Regulator for sale (24)

Condition: used, functionality: fully functional, machine/vehicle number: 905xxxxx, Year of construction: 2019, operating hours: 1,285 h, load capacity: 1,400 kg, lifting height: 5,350 mm, free lift: 1,761 mm, fuel type: electric, mast type: triplex, construction height: 2,250 mm, fork length: 1,150 mm, empty load weight: 1,388 kg, total length: 2,044 mm, drive type: Elektro, construction width: 800 mm, High-lift pallet truck Chassis number: 905xxxxx Load center: 600 Mast type: Triplex Transmission: AC impulse Condition: Refurbished, no warranty Technical condition: very good Front tire type: Polyurethane Front tire size: Load rollers, single polyurethane Rear tire type: Polyurethane Rear tire size: Drive wheel, polyurethane Battery voltage: 24V Battery Ah: 250Ah Battery manufacturer: Jungheinrich Battery type: PzS Battery year of manufacture: 2019 Description: Serviced, technically and visually refurbished, inspected according to UVV regulations, no warranty/liability for defects Impulse control, initial lift, full free lift, Initial lift (basic/rack lift), side battery removal, battery (02/2019) with Aquamatik, built-in charger, display with hour meter and discharge monitor, ignition switch, creep speed button. Lasdpfx Aoznpfioh Sof

Condition: good (used), Heraeus Vötsch Lajdjzg Tpiepfx Ah Sjf Type: VTS 7034-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature Range: -70°C to +180°C Temporal Temperature Deviation: ± 0.1 to ± 0.5 K Spatial Temperature Deviation: ± 0.5 to ± 2.0 K Temperature Change Rate (Cooling): 5.0 K/min Temperature Change Rate (Heating): 6.5 K/min Thermal Compensation at +20°C: 3000 W Thermal Compensation at -20°C: 3000 W Test Chamber Dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External Dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test Chamber Volume: 335 liters Rated Voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated Power: 10 kW, Rated Current: 21 A Sound Level at 1m Distance (Free Field Measurement): < 69dB (A) Side Access: 5.5 cm / 12.5 cm Chamber is water-cooled Refrigerant: R-404A and R-23 Weight: approx. 570 kg For your safety as a buyer, please note the following information: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. Refilling with refrigerants compliant with legal regulations 3. After successful inspection, the chambers undergo a test run, which is monitored with calibrated equipment. Condition: used Scope of Supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Atlas Type: CI3000 F Atlas CI3000 Xenon Fade-Ometer The Ci3000+ Weather-Ometer and the Fade-Ometer, with their advanced digital control systems, represent significant advancements in the application of digital and optical technologies in user-friendly laboratory weathering devices. The 3000 series has been approved by many OEMs in the textile, paint, and coatings industries, as well as in the plastics industry, as an exclusive platform for precise, reproducible, and repeatable results for predicting service life. Features: Climate type Test type: Sunlight simulation Light source: Xenon arc lamp Applications: Additives and dyes Adhesives and sealants Architecture and construction Automotive industry Food and beverages Graphics Packaging Paints and coatings Photovoltaics Plastics Textiles Wind and solar Consumer electronics Compressed air supply The CI3000’s humidification system uses a compressed air ultrasonic spray nozzle. Before entering the unit, the compressed air must pass through a water/oil separator. The small air regulator in the CI3000 contains a second water-oil filter and a 5-micron particulate filter. Ensure that a separate oil-water separator is installed and do not rely on the filter in the air regulator, as it is only designed as an additional device. Compressed air specifications Pressure: 80-100 PSI (552-689 kPa) Flow rate: 4 CFM (0.11 m³/min) Dimensions: Overall dimensions of the CI3000 37.5” Width x 29” Depth x 72” Height (95 cm Width x 73 cm Depth x 183 cm Height) Required footprint: 41.5” Width x 80” Depth (105 cm Width x 203 cm Depth) Total weight: 404 kg Voltage: 380-220 V 38 A 50 Hz ~3/N/PE 8 kW 404 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by telephone. Lodpfx Ahszg Tmho Sjaf

Condition: used, mileage: 10 km, power: 130 kW (176.75 HP), first registration: 08/2026, fuel type: diesel, color: black, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 5,986 mm, total width: 2,040 mm, total height: 2,355 mm, loading space length: 2,250 mm, loading space width: 1,832 mm, loading space height: 1,726 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, * Hill start assist * Exhaust system, EU6e (EC) * Preparation for trailer hitch * Towing eye at the front * Airbag for driver and front passenger, with front passenger airbag deactivation * Roof console with storage compartments, two 1-DIN slots and reading light * Sun visors, foldable and swiveling sideways * Exterior mirrors, electrically adjustable, heated and foldable * Exterior mirrors left and right, convex, with LED turn signal * Front-wheel drive * Emergency brake assist (Front Assist) * Battery 520 A (92 Ah) * Rubber floor covering in the cab * Electronic parking brake * ESP with electronic differential lock, anti-slip regulation (ASR) and ABS * Operating voltage 12 V * H2 - Normal roof * Springs and shock absorbers, standard stabilizer * Engine immobilizer, electronic * Parking assist system (PDC) front and rear * Entry handles on the rear pillars * USB Type-C data and charging ports with increased charging power * Daytime running lights with assistance lights and coming and leaving home function * Electrical connection strip and preparation for bodybuilder (KFG) * Premium interior noise reduction measures * With UNECE CS&SU * 4-cylinder diesel engine 2.0L, engine code 03N.G * Automatic distance control (ACC) * 8-speed automatic transmission * Without speed warning system * Glove compartment with lockable lid, illuminated * Entry handle on the partition in the cargo area * Automatic climate control "Climatronic" in the cab * LED main headlights with LED daytime running lights * LED interior lighting concept in the passenger/cargo area * Safety interior mirror, dimmable * Panel van * Standard climate zones * Traffic sign recognition * Rear view camera system with dynamic guide lines * High beam assist "Light Assist" Ledpfx Aezpc Awoh Sjaf * Leather multifunction steering wheel, heated with Tiptronic * 4 loudspeakers: 2 tweeters, 2 woofers * Country cluster "WLTP EU approval" * Digital instrument cluster * Attention and fatigue detection with driver monitoring camera * MAN SmartLink * 130 kW (LD) * Fog lights incl. cornering light * MAN Connect services incl. call services * 12 V socket, cup holder * Tire pressure monitoring system (TPMS) * All-season tires * L3 - Standard * Three-point automatic seat belts with height adjustment * Rear wing doors with 270-degree opening angle * Heat-insulating glazing * 12 V socket in the cab (in the instrument panel) * Suspension seat "ergoActive" left * Suspension seat "ergoActive" right * Seat belt warning, front * Seat covers in fabric "Toronto Grid" * Heated driver and front passenger seats, separately adjustable * Side marker lights * 2 remote control keys * Approval as 3.5 t * Start/stop system with brake energy recuperation * Lane change assist (Side Assist) * Crosswind assist * Headlight cleaning system, washer fluid level indicator, heated windshield washer nozzles * Windshield wiper intermittent operation with light and rain sensor * LNFZ version with up to 3 seats * Keyless Go * Sliding door, right * Turning warning on both sides and drive-off warning * Turning brake function * Emergency assist (Emergency Assist) incl. driving assistant (Travel Assist) and lane keeping assist (Lane Assist) * Preparation for alcohol interlock * Speed limiter with predictive control * Multifunction front camera * Partition * Step lighting * Digital radio reception (DAB+) * Front axle, reinforced * Comfort telephony with LTE and wireless charging * Tie-down eyes in the vehicle floor * Laminated windshield

Condition: used, mileage: 314,000 km, power: 294 kW (399.73 HP), first registration: 04/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, tail-lift, We are very pleased that our offer has caught your interest and can already assure you that you will be able to purchase a high-quality and reasonably priced vehicle with a fully documented service history from our company! MB ACTROS 2540 COMPLETE TRUCK with certified BÖSE sliding wall superstructures Rear cargo securing 2 x BÄR tail lifts, 2,500 kg each Trailing steering axle Lasdpfx Aew R Ipyeh Sof Retarder Special equipment: Front axle load 8.0 t, driver’s side airbag, work lights, audio system: CD radio comfort (Bluetooth), exhaust outlet downwards right, standard and DuoMatic brake connections, compressed air connection in cab, high-pressure air system, air horn, electrical and lighting for swap-body frames, cab: with air suspension, tinted windshield, vehicle without trailer coupling, info display 12.7 cm with video function, 3-piece mudguard, aluminium fuel tank: 290 L, coolbox/refrigerator, alloy rims 9.00x22.5 (ALCOA matte), roof air deflector (adjustable), 2-cylinder air compressor, reinforced engine brake, steered trailing axle, tire pressure monitoring system, retarder, acoustic reverse warning (external signal), tail lift switch, reinforced rear cross member, fleet management interface, automatic circuit breaker, cab seats: co-driver armrest, cab seats: comfort driver's suspension seat, external sun visor, sun blind side window, driver’s door, 12V socket in passenger footwell, additional 12V socket, 24V/25A socket in passenger footwell, 24V socket in right storage compartment, automatic daytime running lights, preparation for rear-view camera Additional features: Emissions standard EURO 6, axle configuration: 6x2, Actros 4, trailer brake 2-line, connections left, trailer socket 24V / 15-pin, electrically adjustable and heated exterior mirrors, rear axle differential lock, steel compressed air tanks, driver assistance system: Attention Assist (drowsiness detection sensor), driver assistance system: Brake Assist (Active Brake Assist), driver assistance system: Lane Keeping Assist, cab width: 2.30 m, cab: L StreamSpace, cab floor with 320 mm engine tunnel, suspension: full air suspension, electric windows, generator 100A, 12-speed gearbox type G 211-12, AdBlue tank 60 L, rear axle crown wheel 440, bodywork/chassis: chassis, lower comfort bunk, comfort central locking, communication interface, radiator grille blind, regulated power steering pump, engine 10.7 L - 290 kW R6 diesel (OM 470), engine compartment encapsulation, single tires on trailing axle, step mirror, residual heat utilization, disc brakes front and rear axle, seat upholstery: fabric, cab seats: co-driver function seat, cab seats: foldable driver backrest, voltage converter 24V/12V 10A, front splash protection, front axle stabilizer, additional stabilizer rear/trailing axle, exterior stowage flap left, 24V socket in cab, tachograph / EC recording device, cab door extension, aerodynamically shaped underbody fairing, front underride protection, CB radio pre-installation, road charge detection prep, cranked front axle, regulated water pump, gross vehicle weight 25.00 t, additional (water) heater GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We organize your registration and the export documents / EUR 1 and manufacturer’s declaration for export purposes. FINANCING Upon request, we are happy to provide you with a leasing, hire-purchase, or financing offer. SERVICE TÜV inspection / general inspection

Condition: new, Year of construction: 2026, NEW ON THE POLISH MARKET 230 V screw compressor Ljdpfx Ahetz S H Nj Soaf Screw compressors from the Polish brand CORMAK are a guarantee of quality and reliability. Our several years of experience in selling compressors has allowed us to create models with an excellent price-quality ratio. The presented model is perfect for small workshops or small manufacturing companies. It is characterized by high efficiency (380 l / min) in relation to its dimensions, which allows you to operate several devices at the same time. Very low noise level (60 dB) makes staying in the same room not inconvenient. Thanks to the high-quality components used, the compressor is designed for continuous operation and can be used in industry. CORMAK screw compressors: When you expect the highest quality and efficiency! Are you looking for solutions that exceed market standards? CORMAK screw compressors are synonymous with innovation and reliability, created with the most demanding applications in mind. Innovative design: Our compressors are based on advanced engineering and European precision workmanship. The solid design, enriched with modern components, guarantees long-term and trouble-free operation in all conditions. Efficiency optimization: Thanks to inverter technology and intelligent algorithms, the LUFT 400 dynamically adjusts energy consumption to the current demand for compressed air. This means a significant reduction in operating costs while maintaining maximum efficiency. Proven drive system: The LUFT 400 compressor uses a reliable direct drive that minimizes loads on the screw block and engine, ensuring efficient operation and long service life. Quiet operation and comfort: Designed with attention to detail, our compressors are characterized by an exceptionally low noise level. Effective sound and vibration reduction systems provide a comfortable working environment, which translates into better concentration and well-being of operators. Intelligent control: The intuitive electronic control panel from the MAM series is the command center of your compressor. It allows precise monitoring of parameters, maintenance planning and quick diagnostics, ensuring stability and protection of key components. Adaptation to needs: We understand that each application is unique. CORMAK compressors can be configured with additional air treatment systems, allowing for a perfect fit to the specific requirements of your industry. Dynamic working pressure: Automatic pressure regulation ensures that the compressor delivers exactly the amount of compressed air needed at a given time, maximizing energy efficiency and minimizing losses. Sustainability: We focus on environmentally friendly solutions. Energy-saving technologies used in our compressors not only reduce your bills, but also reduce the impact on the environment, and the heat recovery option allows for maximum energy use. Technical parameters Engine power 3.0 kW / 4 HP Voltage 230V/50Hz Efficiency 0-6 bar average 400 L/min Efficiency at 6 bar 390 L/min Capacity at 8 bar 380 L/min Capacity at 10 bar 380 L/min Outlet port diameter (G) 1/2" Dimensions 800 x 520 x 740 mm Weight 95 kg Manufacturer: Cormak

Condition: good (used), Year of construction: 2000, Control unit for electric forklifts, control unit, control panel, interface, motor control, motor controller, control, drive control, drive current control, steering control, control of lifting electronics, control of motor regulator Lodpjzg Dfnsfx Ah Seaf -Manufacturer: Linde, control unit motor controller from electric forklift E15Z-02 -Mat-No.: 3903605715 -Voltage: 24V -Dimensions: 225/130/H50 mm -Weight: 3.0 kg

Condition: good (used), TDK-Lambda Type: GEN10-240 TDK-Lambda GEN10-240 | Power supply, DC, 1 channel, 2U, 10V/240A, 2,400W, RS232, RS485 in a 19-inch enclosure Technical data: Manufacturer: TDK-LAMBDA Power supply type: Programmable laboratory power supply Display type: LED x2 Number of channels: 1 Output voltage: 0...10V DC Output current: 0...240A Max. power: 2.4kW Mounting: Rack 19" Output voltage resolution: 1.2mV Output current resolution: 28.8mA Voltage ripple and noise (regulated): ≤8Vrms, ≤60Vpp Input connector type: Terminal block Manufacturer series: GEN Operating temperature: 0...50°C Dimensions (width x height x depth): 423x43.6x432.8mm Parameter display: 4 digits Software: LabVIEW Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone. Ledpfx Ahezg Exve Sjaf

Condition: excellent (used), Atlas Type: CI3000+ Ci3000+ Weather-Ometer/Fade-Ometer Model: CI3000W Year of manufacture: 06/2022 Operating time: Device 816.5 hours Lamp operating time: Device 647.4 hours Total lamp operating time: 88.9 hours Atlas CI3000+ Xenon Weather-Ometer with calibration case The Ci3000+ Weather-Ometer and Fade-Ometer, with its advanced digital control systems, represent monumental achievements in the application of digital and optical technologies in easy-to-use laboratory weathering devices. The 3000 series has been approved by many OEMs in the textile, paint, and coating industries, as well as the plastics industry, as an exclusive platform for precise, reproducible, and repeatable results for predicting service life. The 3000 series has been certified according to CE, UL, CSA, ISO, and EN standards. The main features of this device are: a rotating sample rack to maximize the homogeneity of all samples; customizable nozzles for uniform front and back spraying of samples; ASTM black panel thermometer or ISO/DIN black standard thermometer for regulating and monitoring the temperature at the sample level to ensure the repeatability of the tests. 4500 W water-cooled xenon lamp Total exposure area 2188 cm2 (339 in2) 12-inch TFT full-color touchscreen control panel - displays all test parameters Direct setting and control of black panel (BPT, non-insulated) or black standard (BST, insulated) temperature Direct setting and control of relative humidity Direct setting and control of the air temperature of the sample chamber Display of diagnostic messages 14 factory-preprogrammed test methods (Weather-Ometer); 6 factory-preprogrammed test methods (Fade-Ometer) Properties: Type: Climate Test type: Sunlight simulation Light source: Xenon arc lamp Laedpfx Aezgr Nhsh Sjf Applications: Additives and dyes Adhesives and sealants Architecture and construction Automotive industry Food and beverages Graphics Packaging Paints and coatings Photovoltaics Plastics Textiles Wind and solar Consumer electronics Voltage: 340-415V 43A 50/60Hz 〜3/N/PE 8kW 410 kg Condition: used Scope of supply: (See image) (Subject to change and errors in the technical data, information provided!) We will be happy to answer any further questions you may have by telephone.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 58 h, load capacity: 1,600 kg, lifting height: 4,400 mm, free lift: 1,435 mm, fuel type: electric, mast type: triplex, construction height: 2,040 mm, fork carriage width: 1,150 mm, fork length: 1,150 mm, empty load weight: 3,304 kg, total length: 1,887 mm, drive type: Elektro, construction width: 1,060 mm, Electric 3-wheel forklift Load center: 500 Fork width: 80 mm Fork thickness: 40 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Lsdpfx Ahszhyhhe Seaf Mast type: Triplex Condition: Like new Technical condition: very good Front tire type: Superelastic Front tire size: 18x7-8 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 140-55/9 Rear tire condition: 80 - 100% Battery voltage: 48V Battery Ah: 625Ah Battery manufacturer: Jungheinrich Battery type: PzS Battery year of manufacture: 2021 Battery condition: 60 - 80% Description: Inspection and safety check recently performed Side shifter, 3rd valve, work lights front, roof protection, windshield, half cabin, load guard, compliant with STVZO (German Road Traffic Licensing Regulations), full cabin, joystick, 3-wheel, 2-pedal operation, joystick (Duo-Pilot), Ultra Comfort seat (textile), electric steering, electric brake, multi-color display, optional button panel, rearview mirror, battery can be regenerated upon request (for an additional charge).

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 1,745 h, load capacity: 1,600 kg, lifting height: 2,400 mm, free lift: 150 mm, fuel type: electric, mast type: simplex, construction height: 2,240 mm, fork length: 1,150 mm, empty load weight: 1,226 kg, total length: 2,002 mm, drive type: Elektro, construction width: 800 mm, High Lift Pallet Truck Load Centre: 600 Mast Type: Standard Ledpfjzhyhbjx Ah Seaf Technical Condition: Very Good Battery Voltage: 24V Battery Capacity: 375Ah Battery Manufacturer: Jungheinrich Battery Type: PzS Battery Year: 2022 Battery Condition: 60 - 80% Description: Inspection + new UVV (accident prevention regulation) Initial lift, Tandem load wheels, plexiglass reach-through guard, tiller operable from all sides, battery can be reconditioned on request (at extra charge)

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 9,227 h, load capacity: 1,600 kg, lifting height: 6,200 mm, free lift: 2,100 mm, fuel type: electric, mast type: triplex, construction height: 2,610 mm, fork carriage width: 830 mm, fork length: 1,150 mm, empty load weight: 3,300 kg, total length: 1,830 mm, drive type: Elektro, construction width: 1,270 mm, Reach Truck Load Center: 600 ISO Class: ISO Class 2 = 1,000 - 2,500 kg Laodszhycxjpfx Ah Ssf Mast Type: Triplex Technical Condition: Normal Battery Voltage: 48V Battery Ah: 620Ah Battery Manufacturer: Jungheinrich Battery Type: PzS Battery Year of Manufacture: 2019 Battery Condition: 60 - 80% Description: New inspection and accident prevention regulations Sideshift, 3rd valve, full free lift, safety light, joystick, single pedal, seat, single-pedal operation, FloorSpot rear and front, flashing light, multi-color display, joystick (multi-pilot), ISM module, battery can be regenerated upon request (for an additional charge).

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 5,306 h, load capacity: 1,300 kg, lifting height: 4,250 mm, free lift: 1,350 mm, fuel type: electric, mast type: triplex, construction height: 2,040 mm, fork carriage width: 980 mm, fork length: 1,150 mm, empty load weight: 2,980 kg, total length: 1,774 mm, drive type: Elektro, construction width: 1,060 mm, Electric 3-Wheel Forklift Load Center: 500 Fork Width: 100 mm Fork Thickness: 40 mm ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: Triplex Technical Condition: Very Good Front Tire Type: Super Elastic Front Tire Size: 18x7-8 Front Tire Condition: 20 - 40% Rear Tire Type: Super Elastic Rear Tire Size: 140/55-9 Rear Tire Condition: 20 - 40% Battery Voltage: 48V Battery Ah: 390Ah Battery Manufacturer: Jungheinrich Battery Type: Lithium-Ion Battery Year of Manufacture: 2019 Description: New inspection and accident prevention regulations Ljdpfxozhycrj Ah Sjaf Sideshift, 3rd valve, rear work light, front work light, roof cover Windshield, half cab, load guard, full free lift, safety light, Safety Pilot, lithium-ion technology, interior mirror, joystick, single-pedal, 3-wheel, seat, single-pedal operation, joystick (solo pilot), multi-color display, electric steering, panoramic rearview mirror, ultra-comfort seat (fabric + air suspension), FloorSpot rear and front, flashing light, reversing alarm

Condition: like new (used), Year of construction: 2025, functionality: fully functional, pressing force: 40 t, table width: 1,000 mm, table length: 600 mm, Hidrobrasil Double Column Press – 40 t – 1,000 × 600 mm – Stroke 500 mm For sale is a hydraulic double column press (H-frame) manufactured by Hidrobrasil, featuring an adjustable pressing force from 6 to 40 t. This machine is designed for calibration, assembly, and small series applications, and stands out thanks to its compact design, robust guidance system, and precise control. Ideal for flexible production processes with changing requirements. ==== Technical data & information: Hydraulic Double Column Press – 40 t ==== General information - Manufacturer: Hidrobrasil - Model: Double Column Press - Design: H-frame / Double Column Press - Designation: Small Batch Press / Calibration Press - Pressing force: 6–40 t (adjustable) - Machine weight: approx. 3,500 kg - Dimensions (L × W × H): approx. 2,100 × 1,600 × 3,500 mm ==== Working area - Max. installation height: 700 mm - Stroke: 0–500 mm (adjustable) - Table height above floor: 800 mm ==== Table & Slide - Table size: 1,000 × 600 mm - Slide area: 1,000 × 600 mm - Guide columns: Ø 100 mm (4 units) - T-slots and holes: as per customer specification ==== Speeds - Rapid traverse speed: 80 mm/s - Pressing speed: 9 mm/s - Return speed: 90 mm/s ==== Hydraulics & drive - Hydraulic pump: ASC, 67 + 8 l/min - Motor power: 4 kW - Total connected load: approx. 6 kW - Operating pressure: max. 260 bar - Pressure accuracy: ± 5 bar - Hydraulic manifold and valves: Duplomatic - Air and oil filters: Filtrec - Electronic oil level switch - Air cooling for hydraulic system Lodpoxrby Hsfx Ah Soaf - Pressure adjustment via pressure switch - Hydraulic unit mounted at top rear ==== Control & Safety - Control via sensors - Safety light sensors - Safety cover (door) at rear - Work area interior lighting - Pressure display via manometer ==== Electrical - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Components: Siemens, Allen Bradley, SICK ==== Electrical cabinet - Protection class: IP54 - Spare capacity: approx. 30% - Cooling: air cooling - Interior lighting: fitted - Operating mode selector: lockable ===== Calibration, assembly work, small batch production, forming technology, flexible production Hydraulic press, double column press, H-frame press, calibration press, assembly press, industrial press Looking for a hydraulic press tailored to your application? Contact us for a customised offer. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the Brazilian national safety standard NR 12, which builds upon these. Our key strength lies in special-purpose machine engineering and press automation. We supply customised hydraulic presses at surprisingly competitive prices. All presses are equipped with hydraulic components primarily from leading European manufacturers.

Condition: new, Year of construction: 2021, pressing force: 10 t, Single-column press – Manufacturer Hidrobrasil – 10 t Assembly press – Table 600 × 300 mm For sale is a hydraulic single-column press (C-frame) from the manufacturer Hidrobrasil with a pressing force of up to 10 t. The machine is designed for continuous shift operation and impresses with its robust construction, reliable hydraulic components, and flexible application possibilities in assembly and pressing processes. ===== Technical data + information: Hydraulic single-column press – 10 t ==== General information - Manufacturer: Hidrobrasil - Model: Single-column press / Assembly press - Design: C-frame press / Single-column press - Pressing force: max. 10 t (100 kN) - Machine weight: approx. 1.2 t - Dimensions (L × W × H): approx. 1,100 × 600 × 1,850 mm - Table height: 850 mm - Control sides: 1 ==== Working area - Max. opening width: 400 mm - Stroke: 350 mm ==== Table & Ram - Table plate: 600 × 300 mm - Ram plate: 300 × 300 mm - Design: with T-slots and central cylinder tension ==== Speeds - Forward speed: 0 – 10 mm/s - Return speed: up to 25 mm/s Ledpohaqygjfx Ah Seaf - Pressing speed: 0 – 10 mm/s ==== Hydraulics - Number of cylinders: 1 - Operating pressure: max. 250 bar - Pressure accuracy: ± 5 bar - Pump: Gear pump, approx. 6 l/min - Oil volume: approx. 80 l (HLP 46) ==== Drive & Electrical System - Motor power: 2.2 kW - Total connected power: approx. 3 kW - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz ==== Equipment & Operation - Pressure setting via rotary control (0.5 – 10 t) - Cable remote control for upward and downward movement - Oil temperature display - Control cabinet cable: 3,000 mm cable with 16 A plug - Machine body powder-coated / double-coated ==== Control & Components - Control system: Siemens - Hydraulic components: Bosch Rexroth ==== Design & Safety - Robust machine body according to DIN 8651 - Cylinder induction-hardened and chrome-plated - CE certificate available - Documentation in German - Low maintenance and reliable - Complies with current EU directives ===== Assembly work, pressing work, small series production, workshop applications, light forming technology Single-column press, C-press, hydraulic press, workshop press, pressing press, industrial press, tool tryout press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German Machinery Directives as well as European Machinery Directives (Directive 2006/42/EC), the EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety regulation NR 12, which is based on these. Our strength lies in special machine construction and press automation. We distribute customized hydraulic presses at surprisingly affordable prices. For the hydraulics of the presses, components from leading European manufacturers are mainly used.

Condition: new, Year of construction: 2021, pressing force: 17 t, Here are the technical data of the offered machine: If the press does not exactly match your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: Hydraulic 17 T single column press Single column press with 17 T capacity, suitable for continuous shift operation, with these basic data: a) Traversing speed 10 mm/sec. downwards, b) opening speed up to 25 mm/sec c) starting pressing speed 10 mm/sec. d) table size 400x400 mm e) ram size 200x200 mm, with T grooves and central cylinder clamping f) Overall size approx. 1150x800x1750 mm g) oil temperature display on oil tank h) pressure adjustment from 5 T to 17 T ( adjustable by knob ) i) Hand lever operation with two speeds j) Machine body powder-coated, or double-painted k) Control cabinet supply line from above with 3000 mm cable and 16 Ampere plug l) assembly, commissioning, instruction against separate calculation Press design Single column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Press force max. ( at 250 bar ) 170 kN Free ripping force max. 10 kN Pressure build-up time Closed die Steel to steel Max. 2 sec. Dimensions Max. Opening width 250 mm Stroke and min. opening 100 mm Table height above floor 850 mm Height above floor (headroom) approx. 2200 mm Hall height min. 2.500 mm parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.3 mm/m Lajdjgrki Sspfx Ah Sef Weight Total weight of press without operating materials approx. 1 to Speeds Fast closing with 10 mmSec. Press speed 10 - 0 mmSec Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders 1 pcs. Operating pressure max. 250 bar Pressing pressure build-up time . 2 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump Gear pump approx. 6 L/min Oil volume approx. HLP 46 MW 100 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Electrical system Main supply 400 V AC Control voltage hydraulic pumps 24 24 V DC V DC Frequency 50 Hz Hydraulic connection Main motor 2.2 kW Total connection Approx. 3 kW Design The press is designed as an oil-hydraulic single-column press. The hydraulic system and the tank are located on the top and inside of the press, respectively. Hydraulic unit The hydraulic system is mounted on the top of the press. Safety devices For the scope of delivery described, the press complies with the valid safety regulations according to UVV, as well as with the standards and directives valid for the EU, in each case in the latest version. Electrical system / control system The control cabinet with control, power and safety components is located on the right side of the press. The press is operated by a hand lever control.

Condition: new, Year of construction: 2025, pressing force: 20 t, Straightening Press – Manufacturer Durendus – DCS-20 – 5–20 t C-Frame Single-Column Press – Table 500 × 600 mm For sale is a compact single-column straightening press (C-frame) from Durendus, model DCS-20, equipped with an adjustable pressing force from 5 to 20 t. The machine features a table size of 500 × 600 mm, a maximum installation height of 700 mm, and boasts a robust, low-maintenance design, making it ideal for straightening, assembly, and press-fit operations. ===== Technical Data & Information: Straightening Press Durendus DCS-20 – 5–20 t Single-Column Press ==== General Information - Manufacturer: Durendus - Model: DCS-20 - Design: Single-column press / C-frame - Pressing force: 5 – 20 t (adjustable) - Machine weight: approx. 1,900 kg - Dimensions (W × D × H): 1,150 × 1,250 × 2,469 mm ==== Working Area Lajdsyghvfjpfx Ah Sef - Installation height: max. 700 mm - Stroke: 0 – 500 mm (adjustable) - Table height: 800 mm ==== Table and Ram - Table size: 500 × 600 mm - Ram size: 500 × 600 mm - T-slots: DIN 650 – 18 mm (or per customer specification) ==== Hydraulic Cylinder - Cylinder diameter: Ø 100 mm - Piston rod diameter: Ø 60 mm - Operating pressure: max. 250 bar - Return speed: 50 mm/s - Idle speed: 25 mm/s - Pressure build-up time: max. 2 s (steel on steel) ==== Hydraulics - Hydraulic pump: Rexroth, 11 l/min - Motor power: 4 kW - Oil tank volume: 150 l - Hydraulic block / valves: Hydropack - Filter: Filtrec - Oil level monitoring: electronic oil level switch - Hydraulic unit: mounted top rear - Pressure accuracy: ± 5 bar ==== Electrical - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Connected load: approx. 4 kW ===== Straightening work, assembly work, press-fit operations, workshop applications, maintenance, small-batch production Straightening press, single-column press, C-frame press, hydraulic press, workshop press, assembly press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured in compliance with German machinery guidelines, as well as European Machinery Directive 2006/42/EC, EC standards, and EU safety regulations. Additionally, our presses exceed Canadian and European safety requirements by fully complying with Brazil's national safety standard NR 12, which is based on these requirements. Our greatest strength is special-purpose machine construction and press automation. We offer tailor-made hydraulic presses at surprisingly attractive prices. For the hydraulics, we predominantly use components from leading European manufacturers.

Condition: like new (used), Year of construction: 2024, pressing force: 200 t, Portal Straightening Press – Manufacturer: Hidrobrasil – 200 t Gantry Press – Table 4,000 × 2,000 mm For sale is a versatile portal straightening press from Hidrobrasil featuring a pressing force of 200 t. The machine is equipped with a large table area of 4,000 × 2,000 mm, a laterally movable cylinder, and a longitudinally adjustable bridge structure, making it ideal for large-format straightening, assembly, and special applications. ==== Technical Data + Information: Portal Straightening Press Hidrobrasil – 200 t Gantry Press ==== General Specifications - Manufacturer: Hidrobrasil - Model: Portal Straightening Press - Design: Gantry press - Pressing force: 200 t - Operating pressure: max. 285 bar ==== Working Area - Table size: 4,000 × 2,000 mm - Clear width / height: 1,500 mm - Column spacing: 2,050 mm - Stroke: 1,500 mm ==== Movements & Travel Paths - Lateral cylinder adjustment: max. 1,450 mm - Longitudinal bridge movement: max. 2,800 mm - Approach speed: 20 mm/s - Working speed: 2 mm/s ==== Construction & Equipment - Hydraulic power unit mounted on top of the press - Hydraulic block and valves by Bosch Rexroth - Air and oil filters by Filtrec - Combination air and water cooling - Stroke cylinder integrated in the worktable - Machine control via wireless remote (2-button system) - Anti-rotation device for the cylinder - Machine status and diagnostics system with touchscreen ==== Auxiliary Stroke Cylinder System - Number of stroke cylinders: 10 units - Rod diameter: 25 mm - Stroke: 80 mm - Controlled via hydraulic system or control unit ==== Control & Operation - Siemens PLC: S7-1200 - Siemens Touchscreen: KTP900 – 9" - Up to 99 programs storable - Functions: - Setting stroke, pressure, and hold time - Decompression time - Piece counter - Alarm management - Real-time monitoring of all parameters - Positioning accuracy: ± 0.1 mm ==== Safety & Monitoring - Emergency stop system - Two-hand/wireless operation with safety release - Safety stripe on gantry columns - Hydraulic oil temperature monitoring - Automatic shutdown at overtemperature (> 65°C) - Filter monitoring Laedpfx Asxrb Nboh Sof - CE compliant ==== Hydraulics - Main drive power: 5.5 kW - Oil volume: not supplied - Oil temperature control with automatic cooling ==== Electrical - Main supply: 400 V AC - Control voltage: 24 V DC - Components: Siemens, Allen Bradley, Phoenix ===== Straightening work, large components, assembly work, special purpose machine construction, steel construction, maintenance, press-fitting applications Gantry press, straightening press, hydraulic press, industrial press, special machine, tool matching press, tryout press, tool tryout press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German Machinery Guidelines as well as European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements, as they comply with all aspects of the Brazilian national safety guideline NR 12, which builds upon them. Our core expertise lies in special purpose machine construction and press automation. The hydraulic systems of our presses primarily utilize components from leading European manufacturers.

Condition: excellent (used), AdBlue Refueling Vehicle Type: HT-Mobilus 200 AdBlue Whether in the automotive industry or directly in vehicle workshops: the MOBILUS AdBlue system allows for safe and economically efficient refueling of your vehicles. The mobile refueling system MOBILUS AdBlue complies with all relevant technical and legal regulations and is therefore also used in research and development projects. Convince yourself of the quality of this mobile urea refueling unit. Technical data: Manufacturer: Rietbergwerke GmbH & Co. KG Type: HT-Mobilus 200 AdBlue Year of manufacture: 2018 Technical data: Dimensions L x W x H: 142 x 73 x 135 cm Empty weight: approx. 260 kg Laodpszgcl Hjfx Ah Ssf Usable volume of the tank: approx. 175 liters Power supply: Connected load: 3.0 kW Connection voltage: 400/230 V / 50 Hz NPE Fuse rating: 16 A Heater: Connected load: 4.0 kW Connection voltage: 400 V Delivery pump: Power: 0.75 kW Supply voltage: 400 V / 50 Hz Additional technical data: Suction and circulation pump: Power: 0.4 kW Supply voltage: 230 V / 50 Hz Dispensing valve: Flow rate: max. 40 l/min Operating pressure: 0.5 – 3.5 bar Control range: Flow rate: 3.5 l/min. – 45.0 l/min Temperature: 15 °C – 45 °C Frequency converter: 1,800 1/min BNC sockets: Output: 0 – 10 V Temperatures: Operating temperature: max. 45 °C Storage temperature: up to -30 °C Materials: Tank: LDPE all other parts in contact with the product: LDPE or stainless steel Transport trolley: Steel, powder-coated Seals / hoses: EPDM Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have on the phone.

Condition: new, Year of construction: 2026, The CNC plasma burner with a water table is a device designed for shape cutting of elements from a sheet of metal (in any shape). This machine is characterized by extreme simplicity and ease of use. Our CNC cutter guarantees repeatability and high cutting accuracy (0.1 mm), thanks to which burnt shapes can be transferred directly to the next stage of production. The water table ensures low consumption of consumables, raw materials and low gas emissions. No need to use fume and flue gas extraction. Why is it worth it? water table no need to use smoke and fumes extraction small size of the machine allows it to be placed anywhere THC voltage height adjuster precise setting of the torch a very precise cut requiring no further processing plate detection system convenient control panel intuitive machine operation can cut and gouge steel machine training at the buyer's/seller's premises a library of standard geometric shapes Characteristics and equipment Workspace 1500 x 3000 Y axis range 140 mm (clearance) The use of a rigid and stable structure Water Table Voltage height regulator Torch height adjustment system Torch height and stabilization sensor FastCAM program - in Polish with a license USB port and internal and external memory Friendly user interface - simple operation even for people who have never worked in programs like FastCAM Import of drawings in *.txt format from any type of program (e.g. AutoCAD, SolidWorks, etc.) MAKRO – a library of standard geometric shapes. This allows you to create figures without having to draw. NESTING – automatic arrangement of elements on the sheet DEMO - Shows the work cycle (path) without turning on the plasma or oxygen source The price is a net price. Price does not include shipping costs. Laodpfx Ahsg Nknys Sjf For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: used, mileage: 769,300 km, power: 290 kW (394.29 HP), first registration: 06/2016, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Mercedes Benz 1840 ANTOS - Leaf/Air - M Classic Space - Air Conditioning - Retarder - Good Condition * Chassis Number: WDB96340310XXXXX - First Owner - German Vehicle - * Diesel - Displacement: 10,677 cc - 290 kW / 400 hp - Euro 6 - Green Sticker - * Tire Sizes: Front Axle: 315/70 R 22.5 Rear Axle: 315/70 R 22.5 * Vehicle immediately available and ready for pickup - * Please arrange an appointment to view the vehicle - * Contact Person: Mr. Andreas Vogel * The information provided online is non-binding. * It does not represent guaranteed properties. * The seller is not liable for typographical or data transmission errors. * Subject to changes, errors, and prior sale. Lasdpfoxgldfox Ah Ssf Special features: Work lights, audio system: CD radio, exhaust facing down to the right, 220 Ah battery, compressed air connection in the cab, aluminum compressed air tank, additional compressed air tank, electrical preparation in the cab 24V/100A, driver assistance system: Attention Assist (drowsiness detection sensor), cab: steel suspension, comfort, 10.4 cm info display with additional display, integral rear, communication interface, front engine PTO with Frigoblock preparation, reinforced engine brake, configurable special module, retarder, fifth wheel coupling, low-maintenance, automatic circuit breaker, seats in the cab: driver's seat with comfort suspension, voltage converter 24V/12V 10A, additional 24V socket in the passenger footwell, preparation/switch for lifting axle on the semi-trailer/trailer, CB radio preparation, additional heating (water), transmission oil cooler Further features: EURO 6 emissions standard, axle configuration: 4x2, axle load front axle 7.5 t, trailer socket 24V / 15-pin, Antos, exterior mirrors electric. adjustable and heated, rear axle differential lock, medium compressed air unit, driver assistance system: brake assist (Active Brake Assist), driver assistance system: lane departure warning, driver's cab: width 2.30 m, driver's cab: hydraulic tilting system, driver's cab: M ClassicSpace, driver's cab: reinforced (Sweden), driver's cab floor with engine tunnel 320 mm, suspension: leaf/air, suspension: aluminum front spring bracket, suspension: 7.5 t front springs, 2 leaves, electric windows, tinted windshield, 100 A generator, 12-speed gearbox - type: G 211-12, urea tank (AdBlue): 60 L, manual lifting roof (steel), rear axle crown gear 440, body/structure: semitrailer tractor, comfort locking system, 3-part fender, fuel tank: 390 L aluminum, unregulated power steering pump, air intake from the front, engine 10.7 Ltr. - 290 kW R6 diesel (OM 470), engine compartment encapsulation, wheelbase 3700 mm, ramp mirror, spare wheel, residual heat utilization, disc brakes front and rear axle, seat cover / upholstery: fabric, seats in the driver's cab: passenger function seat, splash guard front, stabilizer front axle, 24V driver's cab socket, tachograph / EC control device, underbody paneling aerodynamically shaped, underrun protection at the front, preparation for toll collection, front axle offset, water pump regulated, permissible total weight 18.00 t

Condition: new, Year of construction: 2026, functionality: fully functional, Universal cooling system designed for milling machines, band saws, drilling machines and lathes. A wide range of applications Possibility mounting with a o lot of devices Simple handling Silent and efficient electric motor Removable coarse filter Regulated elastic spout Lsdpsvuzwujfx Ah Ssaf Technical parameters MOTOR POWER 25 W VOLTAGE 230 V PUMP EFFICIENCY 240 l/h TANK CAPACITY 13 l TUBE LENGHT 2,6 m CASE OF IP CLASS IP 44 DIMENSIONS 370x320x260 mm WEIGHT 7 kg

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 7,830 h, load capacity: 1,600 kg, lifting height: 5,470 mm, fuel type: electric, mast type: triplex, construction height: 2,460 mm, drive type: Elektro, Electric 3-wheel forklift Lajdpfezf Saqox Ah Sjf Load center: 500 Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tire type: Non-marking Front tire condition: 80 - 100% Rear tire type: Non-marking Rear tire condition: 80 - 100% Battery voltage: 48V Battery type: Lithium-ion Battery year of manufacture: 2019 Battery condition: 80 - 100% Description: The vehicle will undergo a safety inspection according to UVV regulations. Before delivery, the machine will receive a service and be cleaned. Upon request, the machine can be painted for an additional charge. In addition to this model, we have approximately 120 other forklifts of all weight classes in stock at our warehouse in Meschede-Calle. Visit our website – rf-stapler. Lease-purchase and financing options are available at favorable terms. We are also happy to buy your used forklift, even if you do not purchase a vehicle from us. Our forklift specialist workshop specializes in the repair, service, refurbishment, and overhaul of your forklift. We can also display your vehicle for sale at our location. Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, full cabin.

Condition: used, mileage: 10 km, power: 130 kW (176.75 HP), first registration: 06/2026, fuel type: diesel, color: grey, gearing type: automatic, emission class: euro6, number of seats: 6, total length: 6,204 mm, total width: 2,098 mm, total height: 2,352 mm, loading space length: 2,700 mm, loading space width: 2,040 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, * Hill start assist * Exhaust system, EU6e (EC) * Trailer coupling, fixed * Airbag for driver and front passenger, with front passenger airbag deactivation * Roof console with storage compartments, two 1-DIN slots, and reading light * Sun visors, foldable and swiveling sideways * Exterior mirrors, electrically adjustable and heated * Exterior mirrors, left and right, convex, with integrated LED turn signal and wide-angle view * Front-wheel drive * Emergency brake assist * Rubber floor in the cab * Electronic parking brake * ESP with electronic differential lock, anti-slip regulation (ASR) and ABS * Operating voltage 12 V * Stone chip protection (without CO2 optimization) * Normal roof * Immobilizer, electronic * Parking assist system, front and rear * 4-seater bench seat in the 2nd row of seats * USB Type-C data and charging ports with increased charging power * Daytime running lights with auxiliary driving lights and coming home/leaving home function * Electrical terminal strip and preparation for body and equipment installation * Premium interior noise reduction measures * With UNECE CS&SU * 4-cylinder diesel engine 2.0L, engine code 03N.G * ACC Stop & Go * 8-speed automatic transmission * Glove compartment with lockable flap, illuminated * Rear window * Air conditioning system "Climatronic" in the cab * LED main headlights with LED daytime running lights * Preparation for cargo compartment lighting * Safety interior mirror, dimmable * Chassis with double cab * Traffic sign recognition * Rear view camera * High beam assistant "Light Assist" * Leather multifunction steering wheel, heated, with Tiptronic * 4 speakers: 2 tweeters, 2 woofers * Country cluster "WLTP EU approval" * Digital instrument panel * Attention and fatigue warning system * MAN SmartLink * 4-cylinder turbo diesel engine 2.0 l / 130 kW (4V) BIT * Fog lights including cornering lights * MAN Connect * Platform body with aluminum side panels, lashing eyes, step * Position lights on the roof, front * Without manual regeneration of the diesel particulate filter * Wheel arch cover, center, with chrome emblem * 4 steel wheels 6 1/2 J x 16, with 1.050 kg load capacity, in black * MAN Media Van Navigation Business (12.9 inches) * Rear axle "Standard" * 12 V socket, cup holder * Tire pressure monitoring system * Tires 235/65 R16C 115/113 R, optimized for rolling resistance * All-season tires * Wheelbase Standard 3,640 mm * Three-point automatic seat belts with height adjustment * Preparation for rotating beacon, front * Rear lights * Heat-insulating glazing * 12 V sockets in the cab (in the instrument panel and in the left seat frame) * Suspension seat "ergoActive", left * Suspension seat "ergoActive", right * Seatbelt warning, electrical contact in the seatbelt buckle, front + rear * Seat covers in fabric "Toronto Grid" * Heated driver and front passenger seats, separately adjustable * Side marker lights * 2 remote control keys * Approved as 3.5t * Start-stop system with brake energy regeneration Lajdpfxex Suh Ho Ah Sjf * Headlight cleaning system, washer fluid level indicator, heated windshield washer nozzles * Windshield wiper intermittent control with light and rain sensor * LNFZ version with up to 7 seats * Emergency assistant (Active lane keeping assistant, Emergency Assist and Traffic Jam Assist) * Preparation for alcohol interlock * Intelligent speed assistant * With multifunction camera * Step lighting * Digital radio reception (DAB+) * Front axle, reinforced * Comfort telephony with LTE and w

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 442 h, load capacity: 14,000 kg, lifting height: 4,500 mm, fuel type: electric, mast type: duplex, construction height: 3,765 mm, fork length: 2,400 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 600 Fork width: 250 mm Fork thickness: 60 mm Lajdpfxszpcdue Ah Sof Mast type: Duplex Condition: Refurbished with warranty Technical condition: very good Front tire type: Pneumatic Front tire size: 12.00 x 20 Rear tire type: Pneumatic Rear tire size: 12.00 x 20 Battery voltage: 120V Battery capacity: 1550Ah Battery year of manufacture: 2025 Description: Side shifter, fork positioner Blade-type fork tines 3rd valve, 4th valve, rear work light, front work light, heater, compliant with German Road Traffic Licensing Regulations (STVZO), full cabin, air conditioning, CE certificate, dual tires, interior mirror, exterior mirror, windshield wiper, LED.