Used Voltage Stabilizers for sale (13,308)

Condition: like new (used), Year of construction: 2020, power: 12 kW (16.32 HP), Internal dimensions: Width 1350 mm - Height 1900 mm - Depth 1350 mm. Working temperature: 100°C, uniformity ±5°C, empty oven, stabilized condition, measured 150 mm from the walls and 300 mm from the door. Maximum design temperature: 150°C/air. Internal panels: galvanized steel. External panels: painted steel, sand color 42 for the panels and RAL 3020 red for the framework. Insulation: 60 mm rock wool. Door: 1 leaf - silicone gasket - right-hand hinges. Floor: without floor. Heating: electric - power 12 kW/contactors. Controller: ERO ELECTRONIC brand TMS microprocessor type. Setpoint and temperature display - PID control. Calibrated type K thermocouple. Process timer with indicator light; temperature reached and end of timer (cycle) - Type Timer 815. Temperature safety: heating shut-off, audible and visual alarm in case of temperature overrun, restart after fault acknowledgment. Automatic start/stop timer. Internal ventilation: Flow rate: 6600 m3/h - Motor power: 1.5 kW. Exhaust: 1 extraction port, 100 mm diameter. Blsdpfoy Ipzmox Apboh Intake: 1 intake port + metal mesh filter. Electrical cabinet: Power supply voltage 3 x 400 V, 50 Hz. Control circuit voltage 110 VAC. Locked with RONIS key (1242 E or triangle). Wiring of all components is in compliance with CE - EN 60204 standards. Electrical components are from the following brands: TELEMECANIQUE, SOCOMEC, MAF, LEGRAND. • Equipment available for inspection near LYON.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Workpiece Clamping & Table: • Pallets according to DIN 55201, maximum load capacity 5,000 kg • Tilting moment: 50,000 Nm • Rotary table: 10 rpm, resolution 0.001°, tangential moment (clamped): 25,000 Nm Pallet & Tool Changer: • Automatic pallet changer for 3 pallets, changeover time 47 s • Automatic tool changer, chip-to-chip time: 13 s • Tool weight up to 15 kg • Drum magazine with 320 storage slots (4 drums), max. tool diameter 250 mm, max. length 450 mm, max. weight 35 kg Blodpfx Aoyzr Ayepbsh Travel & Feed Rates: • Feed range: 1–40,000 mm/min • Rapid traverse: 40 m/min • Acceleration (x/y/z): 4 / 5 / 3 m/s² • Feed forces: max. 20 kN Main Spindle: • Spindle diameter: 100 mm • Speed range: 20–6,000 rpm (optional 10,000 rpm, 2-stage gearbox) • Tool interface: SK50 (DIN 69871), optional BT50 or HSK-A100 • Through-spindle coolant, max. 70 bar Coolant System: • Coolant unit with gravity fleece filter • Supply pressure: 10–70 bar, tank volume 3,400 l • Temperature stabilization and compensation for high precision • Optional: Sag and spindle expansion compensation, spindle warm-up program • Hinged belt chip conveyor (optional, with fleece or vacuum filter) • Connection to central coolant system possible Performance & Accuracy: • Continuous power consumption as per installation plan • Sound pressure level ≤ 80 dBA • Positioning accuracy (x/y/z): o Tp = 0.006 mm o Psmax = 0.005 mm o Umax = 0.004 mm General Data: • Net weight (complete): approx. 26,500 kg • Color scheme: Light grey RAL 7035 / Mouse grey RAL 7005 / Ruby red RAL 3003 • Operating voltage: 400 V / 50 Hz • Documentation in German language

Condition: good (used), Year of construction: 2009, functionality: fully functional, The supporting structure is made from a thick, monolithic steel block with a reinforced core. The construction is triangular with a wide base and is designed to ensure the machine's stability under all processing conditions. Guideway lubrication is centralized, meaning all guideways on the machine are lubricated from a single point. The CNC features a full aluminum worktable with grooves for vacuum limitation or fixture mounting. This type of worktable is especially useful for “NESTING” operations. The electrical cabinet is built according to international standards, ensuring total reliability of the integrated components. Technical specifications: Working dimensions: With vertical milling: 3260 x 1250 mm With drilling head: 3330 x 1540 mm Maximum workpiece height: 180 mm X, Y, Z axis travel: 3420, 1690, 280 mm Tool storage positions: 12 Vacuum pump: 100 m3/h Power: 10.5 kW Bljdpfx Apoy Nv Ucobsh Rated voltage: 400 V Frequency: 50/60 Hz Machine weight: 3400 kg Software: Xilog3 (supports .dxf file import) Year of manufacture: 2009

Condition: ready for operation (used), functionality: fully functional, The Termomec ROT90 traysealer is an essential ally for food industry professionals looking to automate the dosing and placement of their containers. This dosing carousel ensures unparalleled fluidity while maintaining the precision required for filling various materials. Furthermore, its de-stacker system facilitates jar separation, saving significant time during the feeding phase. This allows you to easily adapt the machine to different container sizes without compromising your production rate. This versatile solution also includes a lidding function, which enhances food safety and protects products from external contamination. Furthermore, its carefully designed ergonomics reduce operator fatigue, as the intuitive controls improve handling. However, the robustness of its stainless steel frame supports intensive use over the long term, preserving the integrity of each mechanical element. Furthermore, the Termomec ROT90 easily integrates into various packaging lines, thanks to interfaces designed to communicate with other existing machines. This optimizes the entire process and meets ever-increasing demands for quality and reliability. Ultimately, this ingenious design strengthens your competitiveness by reducing downtime and ensuring strict compliance with hygiene standards. Bledpfx Apjv Uwyxobeh Contact us now to discover how the Termomec ROT90 can transform your operations and place your company at the forefront of agri-food innovation. Processing Steps: First, the denester system separates and conveys the empty jars, greatly simplifying their placement. Next, the dosing carousel precisely distributes the product inside each container, ensuring a consistent quantity to meet the required specifications. Finally, the sealing phase hermetically seals the jars, protecting the preparations from any external contamination and preserving their freshness until delivery. Technical specifications: Year of manufacture: 2017 for recent technology Voltage: 400V, 50Hz for a standard industrial power supply Weight: approximately 1500kg, guaranteeing stability Dosing carousel: ensures continuous and precise filling Jar destacker: fast automation for various formats E7StAwPE

Year of construction: 2010, condition: repair required (used), functionality: limited functionality, controller model: MTT AutoFab, inner dimension height: 250 mm, laser power: 400 W, machine/vehicle number: SLM2501004, laser type: fiber laser, Equipment: dust extraction, No reserve price – guaranteed sale to the highest bidder! Note: The machine is in visually clean condition. It is also technically complete and the laser has been replaced by the manufacturer. However, the printer has limited functionality with regard to focus quality at the edge areas, which is presumably due to the optics and therefore requires adjustment or repair. TECHNICAL DETAILS Blsdpfx Aey H Hxyepbsh Process: Selective Laser Melting (metal 3D printing) Laser: IPG fiber laser (replaced by manufacturer) Laser power: 200 W Total power: 400 W Maximum power: 900 W Adjustable output power: 10 - 105 % Long-term output stability: ± 3 % Beam quality: < 1.1 M² Wavelength: 1,075 ± 5 nm Spectral linewidth FWHM: < 3 nm Maximum modulation frequency: 50 kHz Build height: 250 mm Shielding gas operation: Argon/inert gas Cooling: water-cooled Cooling temperature: < 30 °C MACHINE DETAILS Laser type: YLR-200-WC Electrical voltage: 85 / 240 V AC Current: 15 A Laser hours: 0.1 h Pump runtime: 2,644 h Power-on hours: 5,017 h Heating power: 1,000 W Nominal temperature: 18 - 30 °C Air pressure: 6 bar Ambient temperature: 0 - 45 °C Dimensions & Weight Dimensions (W x D x H): 3U 19" rack Machine weight: 60 kg EQUIPMENT • Powder System PSH 100 • Extraction and filtration system • Chiller unit • 5x powder bottles (5 L) • 6x substrate plates • 10x filter elements (H13) • 26x wiper lips • Spare sieves • Protective suits • Cleaning wipes for optics (F-theta) • Various small parts & spare components

Condition: reconditioned (used), Year of construction: 2020, The DMK 20 C table cutter is the ideal solution for small to medium-sized meat processing businesses, upscale gastronomy, as well as large kitchens and catering, due to its compact, robust, and precise design. Its well-engineered construction offers users virtually unlimited versatility in all application areas. The machine is equipped with two independently operated, powerful motors, providing a wide range of control options. With the optional robust, mobile base frame, the desired mobility is ensured. You will receive an invoice with VAT shown. Our used equipment service for you: • 6 months warranty on electrical components, limited to the replacement of defective parts, excluding removal and installation costs • High-quality branded equipment at fair prices • Professional overhaul, inspection, and expert cleaning • Tested and fully functional – or your money back • Flexible shipping or self-collection options • Expert advice – before and after purchase • Provision of operating instructions, wiring diagrams, and spare parts • Safety inspection in accordance with DGUV V3 Professional engineering in a compact space: The DMK 20 C2 table cutter is distinguished by its exceptionally smooth and low-vibration operation, even at high speeds. The elaborate manufacturing of each component is carefully and precisely matched. The thick-walled cutter bowl, cast from high-quality stainless steel, provides extremely accurate concentricity, enabling tight adjustment of the cutting blades within the bowl radius. Small cutter, big performance: The powerful motors deliver the highest torque, even with challenging materials. Vibration-damping machine feet, the heavy, double-walled cutter lid, and the Plexiglas noise reduction cover all significantly reduce operational noise and emissions. The clearly arranged control panel with push buttons and the easily readable analog thermometer ensure efficient operation with a broad spectrum of applications. Machine features: • Completely stainless steel construction • Massive cast stainless steel bowl (Bowl capacity: 20L) • High-precision, maintenance-free cutting system • Stainless steel knife head with 6 blades • Tight cutting tolerances within the bowl radius • High stability • Extremely low-vibration operation • Vibration-damping machine feet • Plexiglas cutter lid • Analog, clearly readable thermometer • 6 stainless steel knives, 7 stainless steel spacer rings, two bowls Drive & Controls: • Separate knife shaft drive with electromagnetic brake • Brake release function via push button for cleaning purposes when the lid is open • Separate bowl drive with directly mounted, maintenance-free gearbox • Two speeds, independently switchable • Large, easy-to-use push buttons with easy-to-clean protective covers Technical specifications: • Bowl volume: 20L • Usable fine sausage emulsion capacity (approx. kg): 16kg • Number of knives: 6 • Speed (rpm): 1500/3000 Bsdpfxoyx A Rij Apbjlh • Knife shaft power (kW): 3.3/4.5 • Mains voltage (V): 400 • Control voltage (V): 24 • Fuse: (A) 16 (slow-blow) • Dimensions (W x D x H): 83cm x 80cm x 115cm with mobile base on castors • Weight: 260 kg • Serial number: S18092 • Year of manufacture: 2020 • Model: DMK 20 C2

Condition: like new (used), functionality: fully functional, Year of construction: 2022, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: 3000w, type of cooling: water, compressed air connection: 1 bar, Equipment: cooling unit, dust extraction, Raycus fiber laser cutting machine for sale with a brand new, warrantied laser source, new lens, and new water chiller. The machine also includes an exhaust system and a voltage stabilizer. It can be tested in Hungary, or we can provide an online demonstration. Bjdpfx Ajy I Sd Dspbslh

Condition: new, Year of construction: 2025, Heavy, solid cast iron design High running smoothness due to ground gear wheels running in an oil bath Right/left hand rotation Automatic quill feed with manual fine feed Motorized positioning of the Z-axis Motorized table feed of the X-axis Coolant device Machine lamp Gear head can be swivelled ± 60 Adjustable wedge bars Solid dovetail guide of the column, hand-scraped, for highest stability and greatest possible precision Height-adjustable, large-dimensioned protective disk with microswitch Drilling depth stop Digital position indicator DRO 5 Drilling / tapping function Massive and large dimensioned cross table, precisely surface machined with T-slots and adjustable taper bars Solid cast iron machine base with chip channel Bodpjg U Uv Ujfx Apbolh Single-stage quality industrial electric motor Wide speed range from 60 - 2,760 min-1 due to 2 infinitely variable speeds Dimensions and weights Length approx. 1600 mm Width/depth approx. 930 mm Height approx. 2110 mm weight approx. 495 kg Drilling/milling capacity cutter head size max. 63 mm shank cutter size max. 26 mm Drilling capacity steel (S235JR) 24 mm Continuous drilling capacity steel (S235JR) 20 mm Electrical data Supply voltage 230 V Mains frequency 50 Hz Electrical connection Total connected load 1.5 kW Horizontal milling table length 800 mm width 240 mm Distance vertical spindle - milling table max. 420 mm T-slots size 14 mm T-slots number 3 T-slots distance 80 mm Standards and approvals Standard DIN EN 55011 EMC class C2 Travel X-A

Condition: new, Year of construction: 2026, 16 Bar Screw Air Compressor for Fiber Laser – RMZY Series (15 kW, VFD, Tank Mounted, Complete System) Description: High-performance screw air compressor designed for fiber laser cutting applications. This is a modern direct-driven (direct coupled) compressor, where the screw air-end is directly coupled with the motor for maximum efficiency and reliability. The unit is equipped with a variable speed drive (VFD), allowing soft start and automatic pressure regulation based on air consumption. This significantly reduces energy usage and mechanical stress. Compared to conventional compressors (e.g. Airhorse), this unit operates with a much lower noise level (≤63 dB). Technical Specifications: Model: RMZY Series (16 Bar Version) Working Pressure: 16 bar (adjustable) Motor Power: 15 kW / 20 HP Air Flow: approx. 1.4 m³/min Drive Type: Direct coupled (no belts) Motor Type: Permanent magnet motor with VFD Starting Method: Soft start (via inverter) Cooling System: Air cooled Noise Level: ≤ 63 dB (significantly quieter than standard compressors) Voltage: 380V / 50Hz / 3 Phase Integrated Equipment (4-in-1 System): Air receiver tank – 400 liters Refrigerated air dryer High-efficiency filtration system Oil-air separation system Electronic controller Dimensions & Weight: Dimensions: 1800 × 850 × 1770 mm Weight: approx. 440 kg Key Advantages: Designed for fiber laser cutting machines Direct drive system = higher efficiency, less maintenance VFD control = energy saving & pressure stability Soft start motor = reduced wear and longer lifespan Very low noise level compared to standard compressors Compact, space-saving design High-quality components (SKF bearings, inverter control, etc.) Maintenance: Bedsy Ecuzepfx Apbslh Oil change: every 4000 hours Air filter: every 2000 hours Oil filter: every 2000 hours Oil separator: every 4000 hours Low annual maintenance cost. Also available in: 20 bar version (for higher pressure applications) Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: used, mileage: 303,000 km, power: 205 kW (278.72 HP), first registration: 11/2018, fuel type: diesel, overall weight: 19,000 kg, axle configuration: 4x2, wheelbase: 6,210 mm, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 3, loading space volume: 51 m³, loading space length: 8,527 mm, loading space width: 2,485 mm, loading space height: 2,418 mm, Equipment: ABS, air conditioning, cruise control, low noise, tail-lift, traction control, Permissible total weight: 19,000 kg, Cargo area (L x W x H): 8,527 mm x 2,485 mm x 2,418 mm, Cargo volume: 51 m³, Fabric seats, Air/leaf suspension, Tail lift, Digital tachograph, Low noise: CEE 92/97, Electronic Stability Program (ESP), Anti-Slip Regulation (ASR), Comfort driver seat, Air-suspended driver seat, 2-passenger bench, Radio/CD, Multifunction display, Bluetooth mobile phone prep, Lane keeping assist, Multifunction steering wheel, Electric windows, Electrically adjustable and heated mirrors, Immobilizer, Central locking with remote, Front underrun protection bar, Twin rear wheels, Spare wheel, Hill start assist, LED daytime running lights, Speed limiter, Voltage converter, Emergency brake assist, Anti-spray equipment, DROPSIDE BODY WITH SLIDING CURTAINS AND RETRACTABLE DHOLLANDIA 1,500KG TAIL LIFT, AIR CONDITIONING. Bedpfx Aoy Hn Uiopbslh

Condition: used, mileage: 213,000 km, power: 220 kW (299.12 HP), first registration: 05/2016, fuel type: diesel, overall weight: 13,500 kg, axle configuration: 2 axles, next inspection (TÜV): 05/2026, color: yellow, gearing type: mechanical, emission class: euro6, Year of construction: 2016, Equipment: ABS, electronic stability program (ESP), parking heater, Mercedes 1330 K / Meiller tipper / trailer hitch / air and oil connection, 1 owner / 3 seats / 8-speed manual transmission / etc. Trailer brake: 2-line, Trailer coupling: central axle trailer G 145, trailer socket 24V / 15-pin, work lights at the rear wall of the cab (top), audio system: CD radio (Bluetooth), 165 Ah battery, standard cockpit, driver assistance system: lane departure warning, cab variant: S (short with extended rear wall), suspension: rear springs 10.5 t, front springs 5.1 t, electric windows, 100 A alternator, manual gearbox, hydraulic connection for tipper trailer, reinforced engine brake, PTO MB 131-2c, spare wheel, rotating beacon left/right, rear cross-member for trailer coupling (central axle trailer), circuit breaker, cab seats: air-suspended comfort driver's seat, cab seats: middle seat with seat belt, external sun visor, voltage converter 24V / 12V 10 A, reinforced rear axle stabilizer (for extremely high loads), steel rims 7.50x22.5, 24V socket in cab, CB radio preparation, toll recording preparation, auxiliary heater (air). Emission standard EURO 6, axle configuration: 4x2, front axle load 5.3 t, approach/front mirror, exhaust pipe routed to vehicle center, electric adjustable exterior mirrors (left), rear axle differential lock, steel air reservoirs, two-step entry, cab: S ClassicSpace, cab variant: ClassicSpace, suspension: leaf / leaf, AdBlue tank (urea): 25 L, manual lifting roof (steel), rear axle crown wheel 390, hydraulic pump (Meiller - 5 pistons - 255/1), info display 10.4 cm with additional indicators, body / structure: tipper, fuel tank: 120 L, engine: 7.7 L - 220 kW inline 6-cylinder diesel (OM 936), engine compartment encapsulation, wheelbase 3260 mm, rear window, seat covers / upholstery: fabric, cab seats: fixed passenger single seat, rear fender splash guards, tachograph / EC control device, automatic daytime running lights, fixed rear underrun protection, front underrun protection, immobilizer, permissible total weight 13.50 t Bedjy Ei H Djpfx Apbelh

Condition: used, mileage: 849,741 km, power: 330 kW (448.67 HP), first registration: 07/2015, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: green, gearing type: automatic, emission class: euro6, Year of construction: 2015, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Mercedes-Benz 1845 Tractor Unit Arocs with Hydraulic Auxiliary Drive (HAD) and Tipper Pump Equipped with ALCOA wheels Special Equipment: Audio system: CD radio (Bluetooth), 220 Ah battery, air horn, cab: fixed cab entry, cab with air suspension, 200 L aluminum hydraulic oil tank, left, interior filter for construction vehicles, integral rear panel, 330 L aluminum fuel tank, left, cool box / refrigerator, air intake behind cab, aerodynamic fairings on roof (lockable) and sides, mounting plate / 40 mm fifth wheel plate for coupling, reinforced engine brake, PTO MB 131-2c, programmable special module, chassis lowering without residual air pressure regulation, tire pressure monitoring system, retarder, low-maintenance fifth wheel coupling, automatic circuit breaker, cab seats: comfort air-sprung driver's seat, external sun visor, side window sun blind and driver’s door sun protection roller blind, voltage converter 24V / 12V 10A, front mudguards, additional 24V socket in passenger footwell, front underrun protection, auxiliary heater (water-based) Additional Features: EURO 6 emission standard, ABS deactivatable, 7.5 t front axle load, 24V / 15-pin trailer socket, work lights, Arocs, exhaust pipe to vehicle center, electrically adjustable & heated exterior mirrors, rear axle differential lock, compressed air connection in cab, steel air tanks, medium compressed air unit, cab width: 2.30 m, cab: hydraulic tilting, cab: L ClassicSpace, cab floor with 170 mm engine tunnel, suspension: leaf/air, front springs: 7.5 t, 3-leaf, electric window lifters, tinted windshield, 100A alternator, 12-speed gearbox - type: G 281-12, urea (AdBlue) tank: 60 L, manual steel sunroof, rear axle with 440 crown wheel, Hydraulic Auxiliary Drive (HAD), 10.4 cm info display, interior filter: pollen filter, body type: standard, comfort lower bunk, 3-piece fender, non-regulated power steering pump, front air intake, 2-stage air compressor, heated air dryer, engine: 12.8L - 330 kW inline 6 diesel (OM 471), engine compartment encapsulation, ramp mirror, residual heat utilization, partially protected disc brakes, disc brakes front & rear axle, seat cover/upholstery: fabric, cab seats: functional passenger seat, front axle stabilizer, 24V socket in cab, straight front axle, permissible total weight 18.00 t Bljdpfxsxuxnms Apboh We are also happy to assist you with financing/leasing options through our partners. All information is without guarantee. Subject to errors and prior sale.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Laser Machine Prima Power CV 5000 Year of Manufacture: 2016 3.1. CV SERIES CO₂ LASER SPECIFICATIONS (CV 5000) Average Power Output: 200 W – 5000 W Peak Power Output: Up to 6 kW Wavelength: 10.6 microns Beam Quality Factor (M²): < 2.4 (typically 2.1 to 2.3) Beam Divergence: 1.5 mrad (half angle) Beam Diameter at Exit: 15 mm 1/e², 21 mm full beam Pulsed Operation – Pulse Repetition Rate: 0 – 2 kHz Pulse Duration: 250 microseconds, 70 µs resolution Alignment Stability: +/- 150 µrad Operating Conditions: • Ambient temperature (max.): 40°C • Ambient temperature (min.): 10°C • Relative humidity: < 95% (non-condensing) Diode Laser: • Wavelength: 635 nm • Output Power: < 1 mW ——— 3.2. CV SERIES CO₂ LASER SUPPLY SPECIFICATIONS (CV 5000) Electrical: • Power requirement: 37 kW • Voltage: 400 VAC – 460 VAC ±10%, 3-phase Cooling: • Required cooling capacity: 45 kW • Flow rate: 133 L/min (35 GPM) • Inlet temperature: 18 – 20°C Blsdpfx Ajywwrfjpbsh • Maximum inlet pressure: 6 bar • Nominal inlet pressure: 3 bar • Differential pressure: 1.5 bar • Coolant: Distilled water with 35% Dowfrost HD • Filtration requirement: 100 micron Gas: • Type / Purity / Gas mixture / Consumption: • He: 99.996% | 67.7% | 13.4 – 46.8 SLPH • CO₂: 99.995% | 4.1% | 0.9 – 3.0 SLPH • N₂: 99.996% | 28.2% | 5.8 – 20.2 SLPH • Total Consumption: 20 – 70 SLPH (variable) Additional Requirements: • < 10 ppm water vapor, hydrocarbons, and oxygen • Air: dry – dew point < 2°C • Depending on shutter utilization

Condition: new, Hydraulic Machine, Approx. 7 cycles per minute with the machine at full capacity, 3 Cylinders, 1 Mono-bloc clamp, Max. length of each expulsion 60 mm, 1 Capacitance probe, Octagonal drum diam. 1000 mm. Volume capacity ~ 0.2 m3, Bledpfxodz Dmge Apbsh End of cycle device, Electronic pressure gauges, pump and clamp, Siemens Touch Screen PLC, Siemens Display, Counter, Inductive limit switches, Machine position control via LEDs, Tapping head, Pre-Heating System, Temperature and oil level probe, Current stabilizer, Service keys, Voltage 400V – 50 Hz (Different voltages on request); Standard Painting: Structure RAL 9010, protection casing RAL 9006.

Year of construction: 2000, condition: good (used), functionality: fully functional, machine/vehicle number: MF25-26, Corner Former MF 25-26 – Hydraulic, Year of Manufacture 2000 For sale is a used, robust corner former (Eckenformer) of the type MF 25-26, ideal for precise processing of sheet metal edges and corners in metalworking applications. Technical data: Type: Corner Former MF 25-26 Year of manufacture: 2000 Voltage: 400 V / 50–60 Hz Power: 2.5 kW Hydraulic pressure: 150 bar Tank capacity: 40 liters Weight: approx. 500 kg Manufacturer: ACF Engineering & Automation GmbH, Austria Description: The machine is in used, fully functional condition. It is perfectly suited for industrial sheet metal processing, especially for forming and finishing corners. Thanks to its hydraulic design, it enables consistent and powerful operation. The compact construction and solid build ensure high stability and long-term reliability in production environments. Key features: - Heavy-duty industrial design Bjdey D A Ekjpfx Apbelh - High operating pressure for precise results - Easy integration into existing production lines Condition: used, ready for operation (see photos)

Condition: used, mileage: 390,800 km, power: 290 kW (394.29 HP), first registration: 12/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: yellow, gearing type: automatic, emission class: euro6, loading space length: 8,200 mm, loading space width: 2,500 mm, loading space height: 2,450 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, tail-lift, * Special equipment: Rohr refrigerated body for fresh goods * Carrier Easy Cold Supra 850 refrigeration unit with temperature recorder, 2454 operating hours * Power supply connection for electric cooling * Tail lift by BÄR, 2.5 t, 2450 mm aluminum platform * Turn-assist camera * Reversing camera * Automatic wheel chains on rear axle for traction assistance * Fully air-sprung chassis * Low coupling system * Front axle: 8.0 t * Audio system: CD radio * Exhaust outlet to lower right * Brake connections: Standard and DuoMatic * Compressed air connection in cab * Aluminum air tank * Reinforced engine brake * Steerable and liftable trailing axle * Interface for fleet management system * Cab seats: Driver's comfort air suspension seat * External sun visor * Sun protection roller blind, side window, driver’s door * 12V socket in front passenger footwell * Additional 24V socket in front passenger footwell * Preparation for 2nd control unit for level control Further equipment: * Emission standard: Euro 6C * Axle configuration: 6x2/4 * Actros 4 * Trailer brake: 2-line system, left side connections * Trailer socket: 24V / 15-pole * Exterior mirrors: electrically adjustable and heated * Rear axle differential lock * Driver assistance features: Attention Assist (fatigue detection sensor) * Driver assistance features: Active Brake Assist * Driver assistance features: Lane Departure Warning * Cab: Width 2.30 m, Cab: L type * Cab: steel-sprung, comfort * Cab floor with engine tunnel 320 mm * Suspension: air / air (full air suspension) * Power windows * Tinted windscreen * Transmission: 12-speed, type G 211-12, PowerShift * (AdBlue): 60 L * Manual tilting steel roof * Lower comfort bed, comfort locking system * Communications interface Bledpfjy Ei D Asx Apbeh * Fuel tank: 630 L aluminum * 2-stage air compressor * Engine: 10.7 L, 290 kW, inline 6-cylinder diesel (OM 470) * Engine compartment encapsulation * Residual heat utilization * Disc brakes on front and rear axles * Voltage converter 24V/12V 10A * Front axle stabilizer * Additional stabilizer on rear/trailing axle * External left storage flap * Cab socket 24V * Tachograph / EU control device * Preparation for CB radio * Preparation for toll collection * Auxiliary water heater * In addition to the truck, we sell the Rohr trailer, 1st registration 12/2018, type RZAK/18 for €10,000 net plus VAT * Dimensions: 7360 x 2450 x 2450 mm * Drive-through capability (pneumatic opening/closing) * Tail lift by BÄR, 2.5t, 2350 mm aluminum platform * Carrier Supra 850U refrigeration unit * Temperature recorder * Night power socket * Disc brakes * Extendable drawbar * Payload: 10,980 kg * Unladen weight: 7,020 kg * Gross vehicle weight: 18,000 kg * Subject to errors, modifications, and prior sale

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 13/15, Equipment: documentation/manual, DRYER FOR FRESH PASTA, FRUIT, NUTS ESC100 Dryer that allows the wrapping, pre-dressing and drying of short, long and stuffed pasta, as well as the drying of pasteurized pastes before a possible packaging. Capacity for drying cycle: 100 kg approx Panels injected with hot injected polyurethane foam, with high thermal stability, in white pre-painted sheet Electric heaters for air heating (1,2 Kw x 3 = 3,6 Kw) 500 mm axial fan for forced air circulation (1 Kw approx.) Electrical panel with PLC board for setting and checking drying phases N ° 2 Butterfly valves controlled by Belimo electric actuator Probe for internal humidity control Instrumentation for checking drying and temperature times controlled by an EC-compliant electrical panel with programmable digital electronic card N ° 25 frames in fir wood 600 x 1200 mm, with polyester mesh and aluminum sealing bars N ° 1 Stainless steel trolley on wheels Technical data Voltage: 400 V – Three-phase Total power: about 5 Kw Dimensions Bljdstrd N Eepfx Apboh Depth: 1000 mm (+ 300 mm above the door) Width: 1670 mm Height: 2260 mm (+ 400 mm humidity extractors)

Condition: ready for operation (used), Year of construction: 2001, operating hours: 11,472 h, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: FANUC, controller model: System 16iM, spindle speed (max.): 30,000 rpm, spindle motor power: 15,000 W, number of axes: 3, This 3-axis Makino SNC 64-A15 was manufactured in 2001. It features a main spindle speed ranging from 300 to 30,000 rpm and a spindle motor power of 15 kW. The machine is equipped with a tool magazine holding 15 positions and offers a feed rate of up to 16,000 mm/min. If you are looking to get high-quality graphite and metal machining capabilities, consider the Makino SNC 64-A15 vertical machining centre we have for sale. Contact us for further details. • Electrical • Operating voltage: 400 V • Frequency: 50 Hz • Phases: 3-phase • Nominal current: 90 A • Recommended supply fuse: 100 A (slow-blow/time delay) • Supply cable size: 35 mm² copper • Wiring diagram: 4036 EP 0024 • CNC / Control Bsdpjyvq Drefx Apbelh • Microcomputer control: Professional A • CNC: FANUC System 16iM • DNC connection: Data server interface • Integrated IC memory: 160 MB • Interpolation: NURBS • Programs: 125 main and sub-programs storable simultaneously • Coordinate input: Polar coordinate input available • High-speed contour control: Super-GI • Processor: RISC for fast 3D machining calculations • Mechanical construction • Machine frame: Cast iron welded construction • Axes layout: Cross table system (X, Y); Z-axis console type • Guides: Preloaded ball linear guideways • Thermal stability: Oil circulation cooling for spindle temperature stabilization • Axis performance • Rapid traverse: up to 16,000 mm/min • Simultaneous machining: 3-axis contour milling • Contour accuracy: High (Super-GI control) • Spindle • Tool holder: HSK-A63F • Torque: 21 Nm • Front bearing diameter: 55 mm • Tool system • Tool magazine capacity: 15 tools • Tool breakage monitoring: Yes • Automatic tool changing: Yes • Applications / capabilities • Graphite electrode milling (incl. long tools) • Copper electrode machining • Hardened steel milling • Designed for automatic production sequences • Optimized surface finish capability • Contour-accurate 3D milling capability • Standard/integrated systems • Graphite dust extraction system • Dust removal via: air blast, spindle suction, tool suction • Filter system with automatic collection container • Minimum quantity lubrication (MQL) • Designed for high-speed graphite machining • Suitable for hardened mold cores

Condition: new, Year of construction: 2026, The LUFT screw compressor is the latest solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease to use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. CORMAK screw compressors: When you expect the highest quality and efficiency! Are you looking for solutions that exceed market standards? CORMAK screw compressors are synonymous with innovation and reliability, created with the most demanding applications in mind. Innovative design: Our compressors are based on advanced engineering and European precision. The solid design, enriched with modern components, guarantees long-term and trouble-free operation in all conditions. Quiet operation and comfort: Designed with attention to detail, our compressors are characterized by an exceptionally low noise level. Effective sound and vibration reduction systems provide a comfortable working environment, which translates into better concentration and well-being of operators. Intelligent control: The intuitive electronic control panel from the MAM series is the command center of your compressor. It allows precise monitoring of parameters, maintenance planning and quick diagnostics, ensuring stability and protection of key components. Adaptation to needs: We understand that each application is unique. CORMAK compressors can be configured with additional air treatment systems, allowing for a perfect fit to the specific requirements of your industry. Dynamic working pressure: Automatic pressure regulation ensures that the compressor delivers exactly the amount of compressed air needed at a given time, maximizing energy efficiency and minimizing losses. Sustainability: We focus on environmentally friendly solutions. Energy-saving technologies used in our compressors not only reduce your bills, but also reduce the impact on the environment, and the heat recovery option allows for maximum energy use. CORMAK: Technology that drives your success! Bljdpfx Apomqlgusbsh Technical parameters Engine power 5.5 kW Voltage 400V/50Hz Efficiency 0-6 bar 690 L/min Efficiency at 6 bar 650 L/min Capacity at 8 bar 650 L/min Capacity at 10 bar 630 L/min Outlet port diameter (G) 1/2" Dimensions 810 x 610 x 850 mm Weight 120 kg Manufacturer: Cormak

Condition: new, Year of construction: 2026, LUFT 1000 COMPACT Screw Compressor with Integrated Refrigeration Air Dryer The LUFT series screw compressor from the Polish brand CORMAK represents the latest advancements in pneumatic technology, combined with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. Key Features: Blodoxmg A Aspfx Apbeh Innovative Design Our compressors are built on advanced engineering and European manufacturing precision. The solid construction, enhanced with modern components, ensures long-lasting and reliable operation in all working conditions. Integrated Refrigeration Dryer The COMPACT version with an integrated dryer offers space-saving and comprehensive functionality in a single unit. The built-in refrigeration dryer ensures clean and dry air, protecting your system from corrosion and damage. Quiet Operation & Comfort Designed with attention to detail, our compressors operate with exceptionally low noise levels. Effective soundproofing and vibration reduction systems provide a comfortable working environment, enhancing operator focus and well-being. Smart Control System The intuitive MAM electronic control panel acts as the command center of your compressor. It allows precise monitoring of parameters, scheduling of maintenance, and quick diagnostics, ensuring system stability and protecting key components. Tailored to Your Needs We understand that every application is unique. CORMAK compressors can be configured with additional air treatment systems to perfectly match the specific requirements of your industry. Dynamic Operating Pressure Automatic pressure adjustment ensures that the compressor delivers exactly the amount of compressed air needed at any given moment, maximizing energy efficiency and minimizing losses. Sustainable Development We prioritize environmentally friendly solutions. The energy-saving technologies used in our compressors not only reduce your energy bills but also minimize environmental impact. The heat recovery option allows for maximum energy utilization. Integrated Refrigeration Dryer – Top-Level Air Quality Two-Stage Drying System: Provides effective moisture removal and protection for your pneumatic system. Variable-Speed Fan: Automatically adjusts cooling performance to match working conditions, optimizing energy consumption. Dual Filtration System: Includes a pre-filter with 3.0 µm precision for removing larger solid contaminants, and a fine filter with 0.1 µm precision that captures oil aerosols and other fine particles, ensuring the highest level of air purity. Technical Specifications Parameter Value Motor Power 7.5 kW Voltage 400V / 50Hz Air Delivery (0–6 bar) 990 L/min Air Delivery at 6 bar 950 L/min Air Delivery at 8 bar 950 L/min Air Delivery at 10 bar 930 L/min Outlet Connection Diameter (G) 3/4" Dimensions (L x W x H) 1320 x 650 x 945 mm Weight 320 kg

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 2,300 mm, total width: 4,600 mm, total length: 11,500 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, overall weight: 10,000 kg, table width: 2,000 mm, table length: 4,000 mm, table load: 1,200 kg, space requirement width: 4,600 mm, space requirement length: 11,500 mm, space requirement height: 2,300 mm, positioning accuracy: 0.03 mm, repeat accuracy: 0.02 mm, We offer a high-performance industrial fiber laser cutting machine engineered for precision metalworking in professional production environments. The GWEIKE LF4020GAR (6 kW) integrates both sheet and tube cutting in a single system, delivering flexibility, speed, and exceptional accuracy. Suitable applications include: steel construction, metal fabrication, stainless steel and aluminum processing, enclosures, machinery components, and series production. Main Technical Specifications: - Laser power: 6 kW fiber laser (RAYCUS source) - Working area (sheet): 2000 × 4000 mm - Tube cutting capability: integrated - Maximum tube length: 6 m - Tube diameter: - Round: Ø20–240 mm - Square: 20–240 mm Bsdpfey Hx Iysx Apbslh - Pneumatic front and rear chucks - Automatic shuttle table - Table exchange time: 15–17 seconds Precision & Motion System: - Positioning accuracy: ±0.03 mm - Repeat positioning accuracy: ±0.02 mm - Dual drive rack-and-pinion system - Linear guides: HIWIN - Automatic lubrication system - Fully enclosed safety housing - Industrial smoke extraction unit - Electrical components: Schneider - 80 kVA voltage stabilizer included Load Capacities: - Sheet metal: up to 1,200 kg - Tube: up to 300 kg Dimensions & Weight: - Machine dimensions: 11,500 × 4,600 × 2,300 mm - Machine weight: approx. 10,000 kg Condition: Brand new, unused Availability: In stock, ready for immediate delivery

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 1,200 kg, lifting height: 3,600 mm, fuel type: electric, mast type: telescopic, construction height: 2,280 mm, fork length: 1,150 mm, empty load weight: 650 kg, total length: 1,710 mm, drive type: Elektro, construction width: 800 mm, Pedestrian pallet stacker Load centre: 600 mm Fork width: 180 mm Blsdpfx Aeyt Tlfspbsh Fork thickness: 60 mm Mast type: Telescopic Transmission: Electromechanical Condition: New machine Technical condition: New Front tyre type: Vulkollan Rear tyre type: Vulkollan Battery voltage: 24V Battery capacity: 65Ah Battery manufacturer: Noblelift Battery year: 2026 Description: 4-wheel design for enhanced stability • Robust metal cover, centrally positioned tiller arm • Multi-function display with discharge and error code indicator as well as operating hour meter • The integrated charger ensures greater flexibility • The automatic lift cut-off when the battery is discharged extends battery life • 24V/65Ah lithium battery block • PIN code lock • Ergonomic and robust tiller arm Pulse control, CE certificate,

Condition: repair required (used), Year of construction: 2019, functionality: not functional, machine/vehicle number: BB19076267, Technical characteristics: Core Specifications - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max Feed Speed: 30 m/min - Maximum Remnant Length: 300 mm - Required Air Pressure: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features - Guide Channel: Manually exchangeable, made from Vulkollan-type plastic to support high-speed bar rotation. - Front Steady Block: Interchangeable every 5 mm for optimal bar stabilization. - Remnant Handling: Provides rear extraction using a self-centering extractor or front ejection option. - Repositioning System: Optional rail system allows for up to 600 mm of axial or radial displacement for lathe maintenance. - Automation: Fully controlled by a PLC with brushless motor and digital pneumatic valves to manage speed and thrust. - Bar Storage: Single-level magazine with 235 mm bar capacity. Machine status: NOT WORKING Blsdpfjxx Shuox Apbeh # Set of guides and accessories for bar clamping included # Bearing set for the pusher head "Pusher head bar" included

Condition: new, Year of construction: 2026, The CORMAK HBS421 wood band saw is designed in a vertical configuration, allowing convenient material guidance across the table and enabling both straight and curved cuts. In production environments, rigidity is crucial—therefore, the body and main structural components ensure stable wheel alignment and, consequently, smooth and accurate blade tracking. Drive Wheels and Blade Guidance In professional band saws, cutting quality largely depends on the geometry of the blade guidance system. Properly selected drive wheels ensure correct blade operation along its entire length, reduce slippage, and limit localized overloads. In practice, this results in: Reduced vibration at higher feed rates Improved edge quality—especially in harder wood species Extended blade life thanks to stable operation and correct tension Worktable and Angle Adjustment The worktable provides material support and cutting repeatability. In the CORMAK HBS421 wood band saw, both stability and adjustment capability are essential, allowing for angled cuts. This solution is particularly valued in carpentry workshops where quick transitions between different operations (sizing, structural component preparation, trimming) are required. Drive System and Continuous Operation The band saw drive system is designed for load-intensive operation, while the three-phase power supply enhances smooth running and torque stability. As a result, this vertical wood band saw maintains cutting performance even when processing thicker materials—an important factor in serial production. Adjustable blade speeds allow optimization for specific tasks, reducing edge burning and improving cutting control. Dust Extraction and Workstation Ergonomics Cutting wood generates significant amounts of dust and chips. The integrated dust extraction port enables connection to an extraction system, which significantly improves: Work safety (reduced airborne dust) Visibility of the cutting line Service life of working components by limiting dust accumulation Precision and Productivity In industrial practice, it is not only the ability to cut material that matters, but also maintaining repeatability. The rigid construction, stable blade guidance, and controlled blade tension ensure straight cuts and reduce the need for corrections in subsequent processes (planing, sanding, fitting). As a result, the CORMAK vertical wood band saw supports shorter production cycles and minimizes material waste. Standard Equipment High-voltage release switch Dust extraction port 2 × 100 mm Precision rip fence Cutting blade 3345 × 20 mm, 8 TPI Optional Equipment 100 mm extraction hose Galvanized clamp Bledpeyk Apnjfx Apbjh Mobile base (up to 260 kg capacity) Technical Specifications Wheel diameter [mm]: 480 Maximum cutting height [mm]: 240 Maximum cutting width [mm]: 405 Blade width [mm]: 9.5 – 38.1 Blade length [mm]: 3345 Blade speed [m/s]: 7 / 14 Table tilt range [°]: 0 to +45 Table dimensions [mm]: 535 × 435 Overall dimensions [mm]: 830 × 550 × 2070 Weight [kg]: 160 Motor power: S1 – 2.2 kW / S6 – 3.1 kW Power supply: 3-phase, 400 V Manual (DTR): Yes CE Declaration: Yes

Condition: new, Year of construction: 2026, The professional cast-iron belt–disc sander CORMAK BDS6x10 is a versatile workshop machine that ensures precise and stable machining of wood and plastics thanks to the combination of belt sanding and disc sanding functions. Main Advantages Two functions in one – a belt sander and a disc sander with the possibility of operating the belt both vertically and horizontally, maximizing application flexibility. Higher efficiency – the 750 W (S1) motor provides increased torque and constant rotational speed (2980 rpm). Enlarged working surfaces – a larger sanding disc (254 mm) and a wider belt (1219 × 150 mm) for more efficient processing of large workpieces. Precise angle machining – an adjustable work table (332 × 170 mm) with a miter gauge enables accurate sanding at a 45° angle. Bledpfx Asxy Hrqepbjh Stability and durability – the base made of grey cast iron suppresses vibrations, ensuring maximum precision and long machine life. Efficient dust extraction – a 50 mm extraction port allows effective connection to an external dust collection system. Construction and Operating Parameters The BDS 6x10 belt–disc sander is built on an exceptionally rigid and stable grey cast-iron base, which minimizes vibrations generated during intensive operation. The 332 × 170 mm work table is designed for stable guidance of the workpiece and includes… Technical Specifications Motor power: 750 W Voltage: 230 V / 50 Hz Rotational speed: 2980 rpm Cable length: 1.8 m Table dimensions: 332 × 170 mm Dust extraction port: 50 mm Belt dimensions: 1219 × 150 mm Belt speed: 8 m/s Sanding disc diameter: 254 mm Sound power level: 93.3 dB(A) Sound pressure level: 80.3 dB(A) Gross weight: 41 kg Package dimensions: 495 × 760 × 470 mm