Used Voltage Stabilizers for sale (14,435)

Condition: new, Year of construction: 2025, Heavy-duty, solid cast-iron construction High running smoothness due to ground, oil-bath lubricated gears Right-hand/left-hand operation Automatic quill feed with manual fine feed Motorized positioning of the Z-axis Motorized table feed of the X-axis Coolant system Machine lamp Gear head can be swiveled ± 60° Adjustable wedge strips Codpfx Ajg U Uv Uoaieha Solid dovetail guide for the column, hand-scraped, for maximum stability and precision Height-adjustable, large-sized protective shield with microswitch Drilling depth stop Digital position display DRO 5 Drilling/tapping function Solid and large-sized cross table, precisely surface-finished with T-slots and adjustable wedge strips Solid machine base made of cast iron with chip collection groove Single-stage, high-quality industrial electric motor Large speed range of 60 - 2,760 rpm through 2 continuously adjustable speeds Dimensions and weights Length approx. 1600 mm Width/Depth approx. 930 mm Height approx. 2110 mm Weight approx. 495 kg Drilling/Milling performance Arbor size max. 63 mm Shell mill size max. 26 mm Drilling capacity steel (S235JR) 24 mm Continuous drilling capacity steel (S235JR) 20 mm Electrical data Connection voltage 230 V Mains frequency 50 Hz Electrical connection Total connected load 1.5 kW Milling table, horizontal Length 800 mm Width 240 mm Distance Vertical spindle - Milling table max. 420 mm T-slot size 14 mm Number of T-slots 3 T-slot spacing 80 mm Standards and approvals Standard DIN EN 55011 EMC class C2 Travel X-axis manual 560 mm Y-axis manual 195 mm Z-axis manual 350 mm X-axis automatic 480 mm Vertical spindle Overhang 258 mm Spindle mount MK 4 Speed range 60 – 2760 rpm Number of speed ranges 2 Speed control Steuerung der Drehzahlregelung electronic Draw bar M 16 Swivel range milling head Z - X plane ± 45 ° Quill diameter 75 mm Quill stroke 120 mm Location: In stock at 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2025, Chip extraction unit ASA 7703 mobile, with extraction unit that can be rotated by 180° For milling, planing, and sawing chips (not suitable for dust) Extraction unit can be rotated by 180°, allowing for extraction from below or above Robust metal fan impeller Comes standard with high-quality chassis for improved stability and easy maneuvering Quick-release fasteners for filter and chip bag Fine filter bag, double-woven Dimensions and weights Chip collection volume 2 x 290 l External diameter of extraction nozzle, inlet 260 mm External diameter of extraction nozzle, outlet 3 x 120, 1 x 100 mm Length approx. 1900 mm Width/Depth approx. 670 mm Height approx. 2800 mm Weight approx. 88 kg Electrical data Idle speed 2950 min¯¹ Power consumption 4.8 kW Connection voltage 400 V Mains frequency 50 Hz Filter Filter area 2 x 5.98 m² Noise emission Maximum sound pressure level 98.3 dB(A) Volume flow Nominal volume flow 7700 m³/h Maximum negative pressure 2800 Pa Csdpfxjhk S Sts Aaijha Scope of supply: Two filter bags, two chip bags Location: In stock at warehouse 54634 Bitburg - available for immediate delivery -

Condition: new, Year of construction: 2025, 4-knife cutterhead for optimal planing results Smooth operation thanks to the precision unit and the heavy cast-iron construction Front steel infeed roller with helical gearing for optimal feed rate Satin-finished steel outfeed roller, optionally with a rubber roller in the outfeed The work table is mounted on four large columns, ensuring maximum stability under all working conditions. The thickness table adjustment is done via a handwheel with a numerical display for the set planing height (accurate to 1/10 mm) Standard with two feed speeds, comfortably selectable from the operator's side Powerful industrial motor Stable steel and cast iron construction Equipment details: Work table Mounted on four large spindles, which ensure maximum stability under all working conditions A special lifting device ensures that the table position is maintained perfectly, even without locking TERSA planing cutterhead No more adjustment and screwing Planer knife change in seconds Self-locking Particularly quiet Thickness table adjustment on S 41 elite s via a handwheel with a numerical display for the set planing height (accurate to 1/10 mm) Dimensions and weights Length approx. 900 mm Width/Depth approx. 1070 mm Weight approx. 361 kg Dust extraction connection Dust extraction nozzle diameter for thicknessing 120 mm Drive power Main motor 5 kW Installation information Space requirement Length 1070 mm Space requirement Width/Depth 900 mm Space requirement Height 1100 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Machine body Length 1040 mm Machine body Width/Depth 900 mm Length 3000 mm Width 1600 mm Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Thicknessing Thickness table Length 423 mm Thickness table Width 775 mm Working height min. 3 mm Working height max. 240 mm Working length min. 180 mm Chjdpfx Aaed Hx Hneioa Maximum chip removal 5 mm Electrical data Connection voltage 400 V Planer cutterhead Type TERSA Diameter 95 mm Number of planer knives 4 pcs Speed 5000 min¯¹ Planer width max. 410 mm Feed Speed 6/12 m/min

Condition: new, Year of construction: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 With tilting saw blade and anodised aluminium sliding table Article number: 5504932 Brand: Holzkraft Heavy-duty worktable made of strongly ribbed cast iron – for maximum stability and durability Robust welded steel base – ensures high torsional rigidity and vibration-free operation Precision sliding table made of anodised aluminium – smooth running via high-quality ball contact system Carbide guide rails – for lasting precision and minimal maintenance Tilting cast iron saw unit with double segment guide – precise zero-point tilt for highest cutting accuracy Heavy-duty rip fence with round bar guide Equipped with adjustable eccentric clamp Integrated mitre cutting device on the sliding table – for quick and precise mitre cuts Scoring unit with powerful separate drive motor Equipped with high-quality crosscut fence – with heavy-duty telescopic stop, integrated roller for easy loading and unloading, inclined scale for comfortable reading and practical eccentric clamp for secure hold Saw blade speed adjustable in two stages Practical saw blade pendulum guard TECHNICAL DATA Dimensions and Weights Weight (net) approx. 670 kg Extraction Connection Extraction port diameter: 120 mm Extraction port diameter at saw blade guard: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Rated output (motor power): 7.0 kW Duty type (main motor): S6 Duty cycle (main motor): 40% Sliding Table and Table Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of saw blade: 3200 mm Crosscutting length: 3200 mm Saw blade tilt: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note on max. cutting height: Independent of the scorer Saw blade diameter: 400 mm Note on saw blade diameter: Independent of the scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm Features Scoring unit: with separate scoring motor Anodised aluminium sliding table Handle for sliding table Crosscutting fence Material roller on crosscutting fence Rip fence: with round bar guide Stops: Two professional folding stops Crosscutting shoe Eccentric clamp Table extension Table widening Saw blade pendulum guard Manual height adjustment and tilting of saw unit Chjdpfxjxw N Sbo Aaiea Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, For sawing, milling, planing/thicknessing, and optionally mortising in a confined space. High-precision format sliding table made of anodized aluminum, available in various lengths. Large outrigger (1200 x 650 mm) with a material support roller and extendable aluminum telescope fence up to a maximum of 3200 mm with professional fence flaps. Max. saw blade diameter 315 mm, swiveling from 90° to -45°. Large swivel range of the milling spindle from 90° to -45° to the rear. Four milling speeds up to 10,000 min⁻¹, manually adjustable. With clockwise/counterclockwise rotation of the milling spindle. Heavily ribbed planing tables made of stress-free gray cast iron for decades of stability and flatness. 2-stage feed rate for thicknessing. Three independent industrial motors for continuous operation. With lockable main switch, motor protection switch. Fixed handwheels. Dimensions and Weights Weight (net) approx. 857 kg Planing Planing table width 410 mm Planing table length 2000 mm Maximum planing material removal 5 mm Dust extraction connection Dust extraction port diameter 3 x 120 mm Dust extraction port diameter saw blade guard 60 mm Installation Information Space requirement length 5960 mm Space requirement width/depth 5140 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Working area length 1600 mm Working area width/depth 1600 mm Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Thicknessing Thicknessing table length 757 mm Thicknessing table width 423 mm Minimum working height (thicknessing) 3 mm Maximum working height (thicknessing) 230 mm Maximum material removal (thicknessing) 5 mm Electrical data Connection voltage 400V Mains frequency 50Hz Rated operating mode drive motor S6 Duty cycle drive motor 40% Power drive motor 3 x 5.0 kW Sliding table and table Format sliding table length 2660 mm Format sliding table width 360 mm Format sliding table height 142 mm Table length 1250 mm Table width 430 mm Table height 900 mm Milling spindle Spindle inclination 0 – -45° Spindle arbor diameter 30 mm Chedpfx Aajih Dxleija Usable length of the spindle 125 mm Spindle speed(s) 3500/6000/8000/10000 min⁻¹ Maximum milling tool diameter Maximum tool diameter, adjustable 210 mm Maximum tool diameter, adjustable 45° 150 mm Maximum tool diameter, mortising 275 mm Planing cutterhead Cutterhead type TERSA Cutterhead diameter 87 mm Number of planing knives 4 pcs Cutterhead speed 5200 min⁻¹ Circular saw unit Beside length 2600 mm Cutting width with parallel fence 900 mm Maximum crosscut width to the left of the saw blade 3260 mm Saw blade inclination 90 – 45° Maximum cutting height at 90° 90 mm Maximum cutting height at 45° 63 mm Maximum saw blade protrusion 90° 100 mm Maximum saw blade protrusion 45° 71 mm Diameter (main) saw blade 315 mm Explanation of diameter (main) saw blade: with scoring saw Speed (main) saw blade 4000 min⁻¹ Feed rate Feed rate 6 – 12 m/min Location: In stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, 4-knife cutterhead for optimal planing results Smooth operation thanks to precision drive unit and heavy cast iron construction Front steel infeed roller with helical teeth for optimal feed rate Satin-finished steel outfeed roller, optionally with rubber roller on the outfeed side The worktable is mounted on four large columns, ensuring maximum stability under all operating conditions. Thickness table adjustment is carried out via a handwheel with a numerical display for the set planing height (accurate to 1/10 mm) Standard equipment includes two feed speeds, conveniently selectable from the operator's front Powerful industrial motor Stable steel/cast iron construction Equipment details: Worktable Mounted on four large spindles, ensuring maximum stability under all operating conditions A special lifting device ensures that the table position is maintained perfectly, even without locking Cjdped Hx Hpsfx Aaisha TERSA planing cutterhead No more adjustment and screwing required Planer knife changes in seconds Self-locking Motorized thickness table height adjustment in S 52 elite s Motorized height adjustment of the thickness table with electronic decimal display For greater precision and user-friendliness Dimensions and weights Length approx. 1080 mm Width/Depth approx. 1440 mm Weight approx. 455 kg Dust extraction connection Dust extraction nozzle diameter (thicknessing) 120 mm Drive power Main motor 7 kW Installation information Space required (length) 1440 mm Space required (width/depth) 1071 mm Space required (height) 1088 mm Explanation of space required: The dimensions take into account maximum travel distances or usable lengths. Machine body length 1030 mm Machine body width/depth 998 mm Length 1000 mm Width 1800 mm Explanation of work area: Please add the specified dimensions to the space required to obtain the recommended free installation area for the machine. Thicknessing Thickness table length 520 mm Thickness table width 850 mm Working height min. 3 mm Working height max. 240 mm Working length min. 220 mm Maximum chip removal 5 mm Electrical data Connection voltage 400 V Planer cutterhead Type TERSA Diameter 120 mm Number of planer knives 4 pcs Speed 5000 min¯¹ Planer width max. 520 mm Feed Speed 5/8/12/18 m/min

Condition: used, mileage: 738,880 km, power: 346 kW (470.43 HP), first registration: 11/2019, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 3,900 mm, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2019, Equipment: ABS, air conditioning, cruise control, differential lock, low noise, navigation system, onboard computer, parking heater, traction control, Permissible gross weight: 18,000 kg, leaf-air suspension, retarder, digital tachograph, fifth wheel: JOST JSK 42W, low noise: noise level 80 dB (92/97/EEC), MAN BrakeMatic, brake assist: Emergency Brake Assist 2, Electronic Stability Program (ESP), traction control (ASR), automatic climate control, stationary air conditioning, MAN Media Pack Navigation, auxiliary heater: EBERSPAECHER D4S, comfort seats for driver and passenger, air-suspended driver and passenger seats, driver's armrest, driver's seat heating, headlight leveling, radio: MAN Media Truck Advanced, AUX & USB port: SD card reader, Bluetooth hands-free system, Lane Guard System (LGS), multifunction steering wheel, adjustable steering column, driver's lumbar support, electric power windows (2x), fog lights, electrically adjustable and heated exterior mirrors, electric and heated curb mirror (right), electric and heated wide angle mirror, immobilizer, central locking with remote control, tinted glass: side windows tinted from B-pillar, rear differential lock, front underrun protection, Aero package, spare wheel: 10-hole rim 11.75-22.5 as spare TL, refrigerator, work lights, ambient lighting, hill start assist: EasyStart, daytime running lights, spare wheel carrier, manually operated lifting roof, front cup holders, EfficientLine 3 package: incl. EfficientRoll, brushed aluminum trim, cornering lights, carpet flooring: on engine tunnel, insulated cab: NORDIC, RIO Box, electronic speed limiter: 85 km/h + 1 km/h tolerance, voltage converter, suspended cab, front parabolic springs 8.0 t, rear air suspension 13 t, instrument cluster km/h 'High-Line color', hypoid rear axle HY-1350, HY axle ratio i = 2.53, 2 electrical spiral cables, 24V 7-pin to 7-pin trailer connections, control module for external data exchange (KSM), single-cylinder air compressor with Air Pressure Management (APM), regulated rocker lever brake (EVBec) 3-stage, steel air reservoir, ADR wiring for tank truck, ADR type AT, supply kit for semi-trailer with lift axle. Csdpoy R Izdsfx Aaieha

Condition: new, power: 140 kW (190.35 HP), fuel type: diesel, overall weight: 7,490 kg, color: white, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, The ISUZU Nutzfahrzeugzentrum (Commercial Vehicle Center) in Germany—your specialist for expertise, service, and consultation—offers you the following: ISUZU M30 H with CTS 04-37 roll-off tipper system, featuring remote control. 2 years warranty on the base vehicle from the date of initial registration. Payload: 3,600 kg with a gross vehicle weight of 7,490 kg, or optionally 4,600 kg at 8,500 kg GVW. Specification: - 5.2 liter turbo diesel engine with common rail direct injection, 140 kW / 190 hp, Euro VI OBD-E (maximum torque 510 Nm at 1,600 – 2,800 rpm) - Particulate filter system (DPD) with AdBlue: the self-cleaning system allows for filter regeneration without a workshop visit—thanks to the new DPD regeneration technology, an indicator shows when regeneration is required. Simply press the DPD button and the system will clean itself within 20 minutes. - Automated manual transmission (NEES II) with 6 speeds; wear-free and highly controllable start thanks to integrated torque converter. Manual shifting possible via gear selector. (Also available with 6-speed manual gearbox – surcharge €1,656) - Leaf spring suspension front axle (up to 3,100 kg), rear axle (up to 5,800 kg), front and rear stabilizer - Tires: 215/75 R17.5 C M+S, single tires front - Twin tires on rear axle, spare wheel - Ventilated disc brakes front and rear - Wheelbase: 3,365 mm - Engine brake, electronic parking brake with auto hold - On-board voltage 24V, alternator 90A, 2x battery 90 Ah - Diesel tank: 80 L / AdBlue tank: 16 L - New, modern cab with excellent space utilization, generous headroom and legroom, outstanding ergonomics and visibility; low entry height - BI-LED headlights in front, LED rear lights - Storage compartments in the door panels and headliner, armrests integrated in door panels - Cab painted in Arc White 729 - Vehicle dimensions: Cab width 2,040 mm, rear axle width 2,115 mm, cab height 2,265 mm (top of cab), chassis height 800 mm, chassis width 850 mm, turning circle 12.60 m - Air-sprung driver’s seat, double passenger seat bench, 3-seater cab, headrests, seat belt reminder - Driver and passenger airbags, seat belt pretensioners for driver and passenger - Height and tilt-adjustable steering wheel, interior mirror - Electric windows - Electrically adjustable and heated exterior mirrors - Electronic immobilizer - Double DIN DAB+ radio (6.8") with Bluetooth hands-free, Apple CarPlay / Android Auto compatible, USB charging port - 7" driver information display - Steering wheel controls - Fog lamps, LED daytime running lights, automatic headlights - Reversing warning signal - Central locking with remote control - Digital EU legal tachograph - Air conditioning Safety Pack 2 includes: - ABS: Anti-lock Braking System - ASR: Traction control (rear axle) - EBD: Electronic Brakeforce Distribution - EVSC: Electronic Stability Control - LDWS: Lane Departure Warning System - MOIS: Moving Object Detection - DWS: Distance Warning System - MAM: Emergency Braking for Obstacles - FVSN: Forward Collision Detection - DDAW: Driver Drowsiness Detection System - TSR: Traffic Sign Recognition Chjdow N T Nispfx Aaisa - TPMS: Tire Pressure Monitoring System - RM: Rear View Camera with Monitor - AEBS: Autonomous Emergency Braking System - AEBS: Autonomous Emergency Braking for Pedestrians and Cyclists - Intersection warning: Cross-traffic Alert System - Intersection AEBS: Autonomous Emergency Braking for Intersections - BSIS: Blind Spot Monitoring System Bodywork: Telescope Roll-Off Tipper

Condition: used, Year of construction: 2013, .30 Base machine ACCORD 30 FX N. 1 CONCEPTCNC machining center with a moving gantry and a fixed worktable for processing various sheet-like materials: chipboard, MDF, laminated solid wood, plastic materials, and light alloys. STRUCTUREThe machine is developed using the best three-dimensional CAD systems for solid modeling. The machine bed and moving crossbeam represent the two main elements of the machine structure and are manufactured in the company's own foundry. All mechanical machining operations are carried out on special production equipment in a single setup to ensure optimal precision and to minimize tolerances during machining. The control cabinet is mounted directly on the machine bed, allowing for a very compact design and easy access. CONTROL UNITThe control unit consists of an industrial NC control system with an integrated office PC (desktop computer). The CNC solution with an office PC combines all the features of numerical control with the typical user-friendliness of an office PC, which greatly simplifies the control of the machine by enabling the use of the XILOG MAESTRO user interface, i.e., the software developed by SCM for simple and fast programming, even for non-experts. GENERAL FEATURESPassage height: - 250 mm with H50 accessories- 190 mm with H110 accessoriesPendulum machiningAutomatic lubrication of the axesAir conditioning system to maintain the correct internal temperature in the control cabinet. Software for remote customer serviceOperator interface Xilog MAESTRO with integrated CAD/CAM, which allows for the extremely simple execution of products even with special shapes.A number of advanced functions allow for: - programming via macros- creating and managing subprograms- optimizing machining- managing all machine functions- creating and managing a database of tools93.07.31 Voltage 400 EU 93.12.01 Frequency 50 Hz R0.00.03 LINGUA P.C. GERMAN 02.12.57 ACCORD 30 FX - Worktable X-Y = 3680x1380 56.05.25 No. 6 Support rail MATIC - L1300 The worktable is equipped with: - no. 2 lateral fixed supports- no. 6 aluminum supports, motor-driven and movable along the X-axis- motorized conveyor belt for unloading chipsEach movable support has: - no. 3 motor-driven support rails for clamping cylinders and vacuum suction cups- air blower for cleaning on each movable support- pneumatic locking/release for quick replacement of the clamping cylinders and vacuum suction cups- preparation for lifting devices- preparation for reference stopsThe workpiece vacuum clamping system is divided into 2 independent worktables.23.02.19 DUO Prisma K working unitThe working unit with 5 interpolating axes is located on the moving crossbeam, which provides maximum stability during milling and thus also ensures optimal machining quality of the workpieces, even with high material removal rates. It allows for rotation around the axes arranged at 50° to each other and has many advantages over traditional 5-axis working units, such as: - the full use of the work areas both with 5 axes and with a vertical spindle- spindle external dimensions outside the working area- a particularly light design for horizontal machiningThe unit has a central chip extraction system. Chsdpfx Aaszl Ap Njisa

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.520 - EURO 6 with F805 including L436 fly-jib and V20 winch!!! Tipmatik - Automatic transmission 8x4 Three steered axles STEERING / LIFT axle Front outriggers approx. 14,000 KG Flatbed body with sideboards 6200x2550x600 mm Steps Diamond plate floor Removable sideboards 9 x LED lights Extendable overwidth markings to 3500 mm width Start/Stop Rotating beacon 8 x Rail pockets 6 x Lashing eyes 6500daN Toolboxes Trailer hitch Storage compartments Storage boxes 20-foot container locking mechanism Perforated side profile with lashing eyes 2500daN Crane: FASSI 705 R.2.7, F805R.2.7, F905R.2.7 with fully hydraulic 4-point outriggers, with 6 hydraulic extensions on the main boom, fly-jib L436 with 6 hydraulic extensions, rope winch, cross-function remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), accessories complete for winch operation, pivoting sheave, quick coupling between main boom and fly-jib and more... TECHNO SERIES !! NEW CRANE MODEL Endless slewing range All hydraulic cylinders double-acting Piston rods hard-chrome plated Double knuckle system with PROLINK (overextending knuckle arm up to 10°) Electronic overload cut-off device with FX800 FASSI stability control FSC-S/2 including LMB II Emergency shut-off, as well as optical alarm (90% and 100%) Pressure relief and load holding valves XF system (Extra Flink) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS radio remote control with linear levers and display of pressure range (in bar and %) and 90% + 100% warning in the display Danfoss D900 control block with 4 control valves mounted on the crane pillar Emergency operation for crane control High-pressure filter is supplied pre-assembled with piping separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base hydraulic outriggers, on both sides hydraulically extendable, outrigger span 10.00m, outriggers operable via radio Standard color RAL 3020 traffic red - all cylinders painted black IMC - System (Integral Machine Control) and ADC (Automatic Dynamic Control) = Load-dependent speed control Load hook and attachment bridles (short/500mm) Transport position: folded transversely to the direction of travel Chedpfxezp Sz Ae Aaija Attention: Observe operating voltage / 12V or 24V, standard 24V" FASSI stability control FSC-TECHNO Fassi V7S radio maxi - 8 linear levers Proportional control block » for the outriggers 180° hydraulically swiveling support legs / » on both sides Preparation for operation with variable pump » (LS) Control system for 2 auxiliary functions with » 2 hose guides / hxp-techno Auxiliary boom (Jib) L436, 6-way » hydraulically extendable Jib Double Power (JDP) Multi-coupling with cable entry » for jib mounted for 2 functions Control system for auxiliary function » rope winch Rope winch type V20 - 2,000daN, 60m rope » (12mm) with LMB and mechanical Permanently mounted rope guide for operation with auxiliary boom (Jib) AWC - (Automatic winch Control) for crane » Automatic rope winch control AWC - (Automatic winch Control) for JIB » Automatic rope winch control Work lights operable via display or radio 1 LED work light mounted on the knuckle arm » 1 LED work light mounted on the jib » LED for 2 outriggers, not mounted » (crane) LED for 2 outriggers, not mounted » (auxiliary support beam) Electric rotary distributor with 14 » slip contacts 1 zinc primer from 720RA to F820RA "Zinc primer for JIB ""L42""" Surcharge for Dinitrol application (cavities) Surchar

Year of construction: 2023, condition: new, MRS 300 is a multi-blade rip saw. Machine frame is cast-iron, all the main parts are enclosed, ensuring protection and perfect stability. Feeding unit is straight line caterpillar style, feeding with heavy guided chain. Chain blocks are special cast iron with heat treated and precision ground pins. Nickel-chrome steel saw srbor with 70 mm spindle. Locking mechanism is made with quick release sleeve system. Machine is on stock and can be delivered quickly! The price is valid for a version with motor power of 30 hp. FEATURES: - 3 sets of anti kickback fingers. Two at the top and one at the bottom. - powered lifting and lowering the pressure rollers - new style round fence bar support with quick shift long fence - automatic centralized lubrication system - automatic star-delta switch (slow speed start) and low voltage controls Chsdpfx Aef Dql Teaija - C.E European guard and safety features - long fence for control of longer workpieces - Nominal voltage: 400 V (3-phase)

Condition: used, Year of construction: 2005, Wire erosion / EDM Travel distance X: 750 mm Travel distance Y :500 mm Travel distance Z: 400 mm max. workpiece size X: 1050 mm max. workpiece size Y: 750 mm max. workpiece size Z: 400 mm Cedpfxsy Tl I Ho Aaioha max. workpiece weight: 1500 kg with AWF ( Automatic Wire Feeding ) U / V axis: 770 x 520 mm Machine Dimension:. 2050 x 2850 x 2295 mm Machine Weight: 6000 kg Dielectric System Submerged machining CNC Control: LQ33W • Linear Motor Drives (X/Y/U/V) • Glass Scale Feedback System • No Backlash • High-Speed Automatic Wire Threading (AWT) • Ceramic Components • Advanced Corner Control • LAN / Network Connection • Dielectric Cooling Unit • Built-In Voltage Stabilizer • Precision Motion Controller (K-SMC)

Condition: excellent (used), Year of construction: 2006, Rotogravure Printing Line with 3-Stage Rotary Die Cutter – 660 mm / 200 m/min High-capacity roll-fed rotogravure printing and converting line designed for large production runs of labels, cigarette cartons, pharmaceutical boxes and other folding-carton packaging. The machine combines printing, coating, drying, embossing, creasing, perforating, rotary die cutting, waste stripping and product delivery in one continuous production process. Main technical specifications Printing process: Rotogravure Number of printing units: 7 Materials: Paper and cardboard Substrate weight: 60–300 gsm Maximum reel diameter: 1,800 mm Core diameter: 300 mm Maximum web width: 660 mm Maximum printing width: 640 mm Printing repeat range: 360–760 mm Maximum rotary die-cutting width: 660 mm Rotary die-cutting repeat: 535–800 mm Maximum production speed: Up to 200 m/min Print-to-print register accuracy: ±0.10 mm Print-to-cut register accuracy: ±0.15 mm Electrical supply: 400 V, 3-phase, 50 Hz Web direction: Right to left Unwinding and web control The line is equipped with a dual-reel automatic zero-speed splicing system. Printing and drying Seven rotogravure printing stations provide high-quality, repeatable color production. The printing units include adjustable doctor-blade systems, controlled impression pressure, ink circulation and viscosity-control equipment. Three supplementary ink trolleys are included. Space is available for the possible installation of an additional printing unit. The high-efficiency drying system provides: Electrical heating capacity: 50 kW Air volume: 7,000 m³/h Air velocity: 40 m/s Adjustable temperature and air recirculation Normal and UV varnish applications are possible, depending on the installed coating and curing configuration. Three-stage rotary finishing system This line is particularly suitable for manufacturers requiring large-volume, high-quality packaging production with printing and finishing completed in a single pass. rotogravure printing machine, gravure printing press, used rotogravure machine, 7 color rotogravure machine, 7 colour printing press, web-fed gravure press, roll-to-roll printing machine, packaging printing machine, packaging converting line, cigarette box printing machine, cigarette carton printing machine, tobacco packaging machine, cigarette packaging production line, folding carton printing machine, pharmaceutical carton printing machine, medicine box printing machine, paperboard printing machine, cardboard printing press, label printing machine, inline rotary die cutter, rotary die-cutting machine, rotary die cutter for paper, rotary die cutter for cardboard, embossing and creasing machine, carton die-cutting machine, inline finishing machine, roll-to-sheet machine, industrial sheeter, automatic reel splicer, non-stop reel splicer, register control printing press, The universal sheeting system provides a variable cutting length of 500–1,000 mm. Maximum production speed in sheeting configuration is approximately 140 m/min. The high-pile delivery can stack sheets directly onto pallets. Pallet changes and sample removal can be performed without stopping production. High-pile receptacle Chjdpfozpfpaex Aaisa Voltage stabilizer The exact cylinder, cassette, tooling and spare-parts inventory should be confirmed during machine inspection.

Year of construction: 2026, condition: new, SoloBaker's superb NEW BCS 201 vertical cake and pie slicer. Universal automatic knife slicer with a rotary table designed for slicing all kinds of cakes and pies. The solid construction, precise drive system, automatic cleaning, blades heating and adjustable cutting head speed give almost unlimited possibilities to adapt the device to the selected product. In combination with the affordable price and small dimensions, the slicer is a good and economical solution for small and large patisserie enterprises. Dimensions 130 x 110 x H 148cm. Power consumption 1,2 kw. Voltage: Single phase 230V 50Hz with voltage stabilizer. Required air connection 0.6-0.8 MPa and a flow rate of 200-300 l/min (depending on the cutting speed). Vertical automatic cake and pie slicer (cutting machine) with a rotary table designed for fast slicing of all types of cakes and pies without compromising their attractive appearance and structure into square and triangular portions. With the help of a PLC, the touchscreen allows easy setting of the parameters of the cut part (s) and the built-in microprocessor allows to store up to 20 cutting programs in memory. The cover of the machine is made of stainless steel. The 9L air tank is built into the machine at the front part. The double blades of the knives are made of food grade stainless steel and have a precise drive system and an automatic system for cleaning and heating the blades and an adjustable cutting speed allow the machine to cut various cakes and pies to an effective height 80 mm. Most important functions: - The double blade knife, vibrating in the opposite direction, makes cutting cakes smooth and clean. - Anti-slip rotary table (40x60cm) with a rectangular tray can be easily replaced by 2 round trays (diameter each 30 cm). - Slicing 2 round cakes at the same time. - Locking wheels make it easier to transport the machine to the desired location. - Induction system for heating the knife up to a temperature of 100°C ensures an even cut of hard glaze, chocolate and other similar surfaces. - High degree of accuracy of cutting parameters is achieved by means of two servomotors, which ensure precise operation of knives and table rotation. - Cake pieces are obtained with the same weight, shape and volume, which eliminates the need for additional control. - The speed of lowering and lifting the knife is set according to the characteristics of a particular product - this will allow you to achieve maximum productivity. - Electronic air pressure control ensures smooth and accurate machine operation. - High quality automatic knife cleaning system maintains the perfect appearance of the cut product and eliminates the need to wipe it by hand before each cutting. The cleaning system includes mechanical removal of product residues by a return slider (bar) and a stream of air into a special collection tank. - Residue collection containers eliminate the need for frequent cleaning of the machine and the surrounding work area.. - The machine makes up to 40 cuts per minute. - PLC & touchscreen Siemens. - Built-in voltage stabilizer for stable operation of the electronics and servomotors. CUTTING RANGE: Round cake/pie with a diameter of 15-30 cm - cut into triangles into 2/4/6/8/10/12/14 equal parts. Chedpfxohabdpj Aaija Rectangular cake/pie up to 60 cm x 40 cm - cut into rectangular or triangular shapes. 1 Year Warranty

Condition: used, mileage: 683,000 km, power: 290 kW (394.29 HP), first registration: 07/2015, fuel type: diesel, overall weight: 25,000 kg, axle configuration: 3 axles, next inspection (TÜV): 07/2024, color: silver, gearing type: automatic, emission class: euro6, total width: 2,600 mm, total height: 3,600 mm, loading space volume: 84 m³, loading space length: 7,700 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, Year of construction: 2015, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, * Frigoblock EK 25 U cooling unit * Driving with generator + 380 volt stationary operation * 2,000 kg Bär tail lift * Medium-length driver's cab * Automatic transmission * Constant throttle * Euro 6 * Adaptive cruise control * Lane departure warning * Sat nav * Differential lock * Fully air-suspended * Rear view camera * Spoiler * Automatic climate control * Seat heating * Aluminum floor * Interior loading space 7,700 x 2,480 x 2,200 mm * Tires front + rear 385/55 R 22.5, mid. 315/70 R 22.5 Only available as a combination with a suitable trailer: * Front flap for loading into the truck * Drawbar pneumatically extendable * Frigoblock cooling unit EK 25 U * Driving operation with generator + 380 volt stationary operation * 2,000 kg Bär tail lift * Wüllhorst make * Internal loading space 7,800 x 2,480 x 2,200 mm * 18,000 kg . Cedpfx Aaetpr Aioioha EZ 09/2015 * SAF axles * Disc brakes * Air suspension The price includes the truck and trailer as a complete combination. Several trains available, from 2015 - 2017 ---- Special equipment: Front axle load 8.0 t, driver's side airbag, audio system: CD radio (Bluetooth), exhaust pointing downwards to the right, 220 Ah battery, standard and DuoMatic brake connection, compressed air connection in the driver's cab, aluminum compressed air tank, high compressed air unit, driver assistance system: lane departure warning, tinted windscreen with band filter, vehicle without trailer coupling, 150 A generator, 12.7 cm info display with additional display, communication interface, 2-cylinder air compressor, front engine output with Frigoblock preparation, reinforced engine brake, parameterizable special module, acoustic reversing alarm (external warning signal), tail lift switch, automatic circuit breaker, seats in the driver's cab: driver's seat, comfort suspension seat, sun blind for side window, driver's door, voltage converter 24V / 12V 10 A, steel rims 11.75x22.5 (on trailing axle), steel rims 11.75x22.5 (on front axle), additional 24V socket in passenger footwell, preparation for 2nd control unit for level control, preparation for CB radio, preparation for cool box / refrigerator, additional thermal insulation, additional heating (water) Other equipment: Emissions standard EURO 6, axle configuration: 6x2, trailer brake 2 - line, connections on the left, trailer socket 24V / 15-pin, Antos, outside mirror electric. adjustable and heated, differential lock rear axle, driver's cab: width 2.30 m, driver's cab: hydraulic tilting device, driver's cab: M ClassicSpace, driver's cab: steel-sprung, standard, driver's cab floor with engine tunnel 320 mm, suspension: air / air (full air), electric windows, 12-speed gearbox - type: G 211-12, urea tank (AdBlue): 60 litres, manual lifting roof (steel), rear axle crown gear 440, body/structure: chassis, comfort locking system, fuel tank: 290 litres aluminum, unregulated power steering pump, lifting device trailing axle, air intake from the front, engine 10.7 litres - 290 kW R6 diesel (OM 470), engine compartment encapsulation, trailing axle with single tires, ramp mirror, spare wheel, residual heat utilization, disc brakes front and rear axle, Seat cover / upholstery: fabric, seats in the driver's cab: passenger function seat, splash guard at the front, stabilizer at the front axle, additional stabilizer, rear axle / trailing axle, 24V socket in the driver's cab, tachograph / EC control device, aerodynamically shaped underbody paneling, underrun protection at the front, preparation f

Condition: used, mileage: 39,568 km, power: 315 kW (428.28 HP), first registration: 03/2017, fuel type: diesel, overall weight: 33,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: ABS, air conditioning, all wheel drive, parking heater, Vehicle No.: 193-26 Vehicle arriving soon!!! Coming soon!!!!! Mercedes-Benz 3343 Arocs 6x6 All-Wheel Drive Ex-German Armed Forces vehicle Registration Date: 03/2017 * Euro 6c * MEILLER three-way tipper * 6x6 ALL-WHEEL DRIVE, switchable Codpfx Aezkcwqeaisha * 3-seater * Wheelbase 3,600 mm Special equipment: Trailer brake 2 - line, trailer socket 15-pin 7+7-pin, audio system: CD radio, step with handrail on the roof, suspension: rear springs 2x15.0 t, fire extinguisher, windshield tinted with band filter, heated, transmission 12-speed - type: G 330-12, rear lights construction site version, hydraulic pump (Meiller pump - 7 pistons - 275), interior filter for construction site vehicles, fuel tank: 290 liters steel, left, air intake behind the cab, spare wheel, rotating beacon left/right, seats in the cab: driver's seat backrest foldable, seats in the cab: middle seat with seat belt, voltage converter 24V / 12V 10 A, steel rims 9.00x22.5, storage flap outside left, 12V socket in the passenger footwell, 12V socket additionally, 24V socket in the passenger footwell additionally, stone chip protection grille, underrun guard at the rear foldable, CB radio preparation, auxiliary heater (water) Additional equipment: Emission standard EURO 6, axle configuration: 6x6, axle load front axle 7.5 t, trailer socket 24V / 15-pin, Arocs, exterior mirrors electrically adjustable and heated, battery 170 Ah, differential lock rear axle, differential lock front axle, compressed air connection in the cab, compressed air tank steel, cab: width 2.30 m, cab: cab entrance movable, cab: tilting device hydraulic, cab: M ClassicSpace, cab: steel-sprung, standard, cab floor with engine tunnel 320 mm, suspension: leaf spring / leaf spring, suspension: front springs 7.5 t, 3 leaves, power windows, generator 100 A, urea tank (AdBlue): 60 liters, lift roof manually (steel), rear axle bevel gear 300, info display 10.4 cm, interior filter: pollen filter, body/superstructure: tipper, steering assistance pump unregulated, air compressor 2-cylinder, air dryer heated, engine 10.7 liters - 315 kW R6 diesel (OM 470), engine brake, engine compartment encapsulation, auxiliary drive MB 131-2c, wheelbase 3600 mm, ramp mirrors, waste heat recovery, rear window, seat cover / upholstery: fabric, seats in the cab: passenger functional seat, seats in the cab: driver's seat suspension seat standard, front axle stabilizer, cab socket 24V, tachograph / EC control unit, drum brake front and rear axle, preparation for toll collection, front axle straight, permissible total weight 33.00 t, oil cooler transmission Inspection possible during our opening hours at any time, test drive after appointment! In the case of export sales, a deposit will be retained, which will be refunded after receipt of the proof of delivery. Company logos or advertising logos on the vehicles may have been digitally edited in the photos. No guarantee is given for the function of the extras. All information without guarantee - errors, changes, typos and prior sale reserved. Vehicle descriptions are expressly not guaranteed properties. We refer to our general terms and conditions and ask you to take note of them.

Condition: good (used), Weiss SC 450 Corrosion Testing Device Manufacturer: Weiss Umwelttechnik GmbH Type: SC 450 Corrosion testing device / salt spray testing chamber for salt spray tests, condensation water tests, corrosion testing, material testing, and quality assurance. Technical Data Test chamber volume: approx. 480 liters Test chamber height with hood: approx. 1190 mm Test chamber height without hood: approx. 740 mm Width to spray nozzle: approx. 750 mm Depth: approx. 570 mm External dimensions: Height with hood: approx. 1370 mm Height without hood: approx. 920 mm Width: approx. 1930 mm Depth: approx. 800 mm Temperature range, salt spray test: 5 K above ambient temperature to +50 °C Temperature range, condensation water test: 5 K above ambient temperature to +45 °C Temperature stability over time: ±1 K Brine tank: approx. 180 liters Compressed air: min. 4 bar / max. 10 bar Weight, empty: approx. 180 kg Electrical Data Voltage: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2 kW Rated current: 8.7 A Equipment Liebisch / Weiss control system S!MCON/32 control and regulation unit Color touch panel Acrylic glass nozzle in the spray nozzle Heated compressed air humidifier Flow and dosing system for brine Brine storage tank Test specimen holder / support tubes Floor grate Measurement and connection fittings Codpfxjzbatrs Aaieha Testing Procedures Salt spray test according to DIN EN ISO 9227 / DIN 50021 Condensation water test according to DIN EN ISO 6270-2 / DIN 50017 Condition Used equipment from industrial application. Operating hours according to display: approx. 37,926.6 h Optical condition as shown in the pictures. Interior with visible deposits / corrosion marks due to use. Device can be switched on, display is active. Inspection and testing on site possible by arrangement. Scope of delivery: see pictures. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: excellent (used), TIRA Type: TCZ 4022 S -2K Description: Air-cooled climate simulation chamber System Structure: The unit consists of the following main assemblies: - Walk-in, insulated chamber - Air handling room - Humidification system - Machinery room - Control cabinet Technical Data: Performance Range for Temperature Testing: - Temperature range: -40...+140°C - Temperature stability, in supply air (temporal): ≤ ±0.5°C (without thermal test chamber load, according to DIN 50011 T13 / EN 60068) - Temperature stability, in supply air (spatial): ≤ ±1.0°C (without thermal test chamber load, according to DIN 50011 / EN 60068) - Heating rate (per DIN 50011): approx. 2.0 K/min (without thermal test chamber load, per DIN 50011 / EN 60068) or test specimen in the temperature range of -30°C...+85°C - Cooling rate (per DIN 50011): approx. 2.0 K/min (without thermal test chamber load, per DIN 50011 / EN 60068) or test specimen in the temperature range of -30°C...+85°C Performance Range for Climate Testing: - Temperature range: +10...+90°C - Humidity working range: 10...approx. 95% RH (without thermal test chamber load) - Dew point temperature range: +5...+89°C (without thermal test chamber load) - Humidity stability (in supply air, temporal): ≤ ±2.5% RH, measured in supply air Performance Range for Climate Testing with Heat Compensation: - Temperature range: +15...+80°C - Humidity: 15...approx. 80% RH (without thermal test chamber load; with max. 16 kW heat compensation) - Dew point temperature range: +10...+74°C (without thermal test chamber load) Dimensions: - Test chamber (WxDxH): approx. 2260 x 4648 x 2260 mm - External dimensions (WxDxH): approx. 2660 x 6460 x 2800 mm - Clear door passage test chamber door (WxH): 2260 x 2260 mm - Climate module KB 127 (WxDxH): 1700 x 800 x 1400 mm - Control cabinet (WxDxH): 800 x 500 x 2000 mm Design: - Airflow: Supply air via perforated plate at the rear wall, ceiling area; exhaust air via perforated plate at the rear wall, floor area - Temperature control: Direct cooling via evaporation of refrigerant in a finned heat exchanger; heating via electric resistance heater - Dehumidification: Direct dehumidification via refrigerant evaporation in a heat exchanger - Interior lining: Stainless steel Codpfjzizk Hsx Aaijha - Exterior cladding: Galvanized, plastic-coated steel sheet - Floor: Stainless steel, floor load 15,000 N/m² - Wheel load (contact area ≥4 cm²): 1,500 N/wheel - Door: Double-leaf, stainless steel, externally coated with viewing window (WxH): 1000 x 1000 mm - Test area lighting: 4 spotlights, 500 W each - Insulation: Dual-layer insulation, 80 mm PUR foam, 120 mm mineral wool - Refrigeration unit (1 pc): Bitzer 6G-30.2Y - Refrigerant: R449A - Refrigeration oil: SEZ 32 - Steam humidifier (1 pc): EDB 40 Color scheme: - Chamber RAL 9010, white - Door RAL 9010, white - Machine unit RAL 7032, pebble grey - Control cabinet RAL 7032, pebble grey Weights: - Total system: approx. 4,900 kg - Machine set KB 127: approx. 750 kg - Control cabinet: approx. 120 kg - Humidification unit: approx. 64 kg Connections: - Rated voltage: 400 V +6%/-10%, 3/PE N, 50Hz - Rated power: 95 kW - Rated current: 150 A

Condition: used, Year of construction: 2016, functionality: fully functional, overall weight: 2,000 kg, color: black, power: 720 kW (978.93 HP), output voltage: 400 V, output frequency: 50 Hz, continuous power (apparent): 800 kVA, Containerized Rotary UPS System Featuring Marelli Generator MJB 400 LB4 B2 & Rotabloc Flywheel Technology Model:MJB 355 MB4 B2 Rated Power: 900 kVA, 400V / 920 kVA, 440V Active Power: 720 kW Voltage: 400 V / 440 V Frequency: 50 Hz / 60 Hz Rated Current: 1155 A, 400V / 1207 A, 440V Speed: 1500 / 1800 rpm Power Factor: 0.8 Insulation Class: H Weight: 1950 kg Protection class: IP23 Bearings: 6317 C3 Lubrication: Mobil Polyrex EM Rotabloc RBT Alternator (Flywheel-Based UPS) Model Type: MJB-355 UPS Power Limitation:500 kVA Voltage Range: 400 V ±12.5% Current: 722 A Frequency: 50 Hz Speed: 1500 rpm Weight: 1950 kg Manufactured in Belgium Features & Benefits Rotary UPS – No batteries required Chedpfowx H Hzex Aaisa Compact footprint with integrated cooling Ideal for grid stability and critical systems Reliable European engineering (Belgium & Italy) CE marked, ready for international use

Condition: new, Year of construction: 2022, Model DPL-1530HP-4 kW 8 levels, 3000x1500mm (300kg load per level) Loading and unloading system Laser Raycus 4 kW Control system FSCUT 2000ER Laser head Raytools BM115, autofocus Chiller Hanli 3.8 kW Air blower 11kW Nesting software Cypnest-Nesting Software Low-pressure gas alarm, gas pressure monitor, and software control Voltage stabilizer 48-72 KVA Enclosure according to Laser Class 4 Heavy-duty machine base. High-performance servo motors. Intelligent cutting control system, easy operation Fast tack welding, supported by segment and step tack welding technology Specialized air duct with oversized diameter, ensuring smooth fume extraction. Completely enclosed design European CE standard Dual shuttle tables provide a high level of safety and convenience. Chsdpfxoci Ik So Aaija Positioning accuracy ±0.05/1000mm Repeat positioning accuracy ±0.03/1000mm Acceleration 1.6 m/s² Max. speed 120 m/min Sheet metal loading capacity 1500 kg Size 8907×2813×2658 mm Laser power 6000 W Control system FSCUT 2000 Machine power 32-48 kW Voltage 380V/50Hz Delivery time: 5 months (construction time + transport) Delivery to customer's premises: €3,500 Installation and training: €8,850 Industry 4.0 software: €9,500 FILTERCUBE 2H, 4.0 kW, 40 m²: €10,500 The Filtercube series is a dust extraction system equipped with filter cartridges, used for fume filtration and dust removal.

Condition: used, mileage: 316,911 km, power: 310 kW (421.48 HP), axle configuration: 6x2, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 95,000 mm, total width: 25,100 mm, total height: 33,500 mm, Year of construction: 2016, Equipment: ABS, EBS, air conditioning, - Brake system For inquiries regarding the vehicle, please contact Mr. Seidel (tel. [phone number]). Mercedes-Benz Actros 2542 LL 6x2 BDF swap body chassis A1A front axle, air-suspended, A1D front axle 8.0 t, A1Z front axle, angled version, A2E rear axle, crown wheel 440, hypoid, 13.0 t, A4Z trailing axle, 7.5 t, can be unloaded, can be lifted, A5B axle ratio i = 2.533, B1B electronic brake system with ABS and ASR, B1E electronic compressed air supply unit, high, B1F heater, electronic compressed air supply unit, B2A disc brake, on front and rear axles, B3H secondary water retarder, B4A condensate monitoring, for compressed air system, B4M compressed air tank, steel, B4Z compressed air tank, additional, B5B trailer brake, 2-line, C0Z frame overhang 1950 mm, C2P wheelbase 4600 mm, C5A chassis design for ADR, C5I fastening parts, for platform body, C5P frame bolted, C6C steering, 1-circuit, C6I power steering pump, regulated, C6U additional stabilizer, rear/trailing axle, C7A rear underrun protection (ECE), C7F front underrun protection (ECE), aluminum, C7J battery carrier, batteries side by side, C8I splash guard (EC), front, C8Y underbody fairing, aerodynamic, D1B driver's air-suspended seat, standard, D1N passenger's functional seat, D2N seat back, release mechanism, driver's seat, D3B comfort bunk, lower, D3X seat cover, plain weave fabric, D4T curtain, transverse in front of bed(s), D6F air conditioning, D6I waste heat utilization, D6M auxiliary hot water heater, cab, D7G storage compartment lid, driver and passenger side, D7J drawers, under bunk, D7R storage flaps, above windshield, D8A roof hatch/ventilation flap, roof, E0D battery sensor, Hella, E1C batteries 2 x 12 V/220 Ah, low maintenance, E1N generator 28 V/100 A, E3A voltage converter 24 V/12 V, 10 A, E3L socket 24 V/15 A, passenger footwell, E3M socket 24 V/15 A, behind seat, E4A communication interface (KOM), E4C additional functions, for body manufacturer, E4W starting aid, speed limitation 30 km/h, E5G battery disconnection switch outside, on the frame, E5H night driving light switch, E5U ADR type class EX/III, including EX/II and AT, E6A trailer socket 24 V, 15-pole, E6E adapter, 15-pole to 2x7-pole socket, E7F cable remote control for air suspension, F0F side module, N3 vehicle, F0X mirror cover, road vehicle, F1D L-cab ClassicSpace, 2.30 m, tunnel 170 mm, F3B cab mounting, comfort, steel-sprung, F3W cab tilting device, mechanical-hydraulic, F4G cab side wall, closed, right, F4H cab rear wall, without window, F4X storage compartment exterior flap, left, F5Y A-pillar trim, F6C windshield tinted, F6I front mirror, heated, F7A bumper, corners made of plastic, F7C bumper, middle part with towing eyes, F7T door extension, F7X cab entry left/right, fixed, F8E locking system, with central locking, F8F comfort locking system, G0U driving program economy, G2B transmission G 211-12/14.93-1.0, G5A single-plate clutch, G5G Mercedes PowerShift 3, I2E tires tubeless, 315/70 R 22.5 front axle/front lift axle/rear lift axle, I2F tires tubeless, 315/70 R 22.5 rear axle, I4C wheel formula 6x2 ENA, I6X air suspension, rear axle, J1B instrument cluster, 10.4 cm, with additional displays, J1R tachograph digital, EG, speed, ADR, J1S tachograph manufacturer VDO, J2B CD radio, Bluetooth, J2K speakers, 2-way system, J9A pre-wiring CB radio, 12 V, DIN slot, J9D pre-wiring for toll collection, J9L pre-wiring FleetBoard for J3J, J9X omission Truck Data Center, JE5T ADR type class... Cjdpfx Aezpgx Ajaisha

Condition: new, functionality: fully functional, Year of construction: 2026, The CORMAK JDSA is a portable battery-powered strapping tool designed for securing parcels, cartons, bundled packages, and palletized loads. The device is compatible with polypropylene (PP) and polyester (PET) straps with widths from 13 to 16 mm and thicknesses from 0.4 to 1.2 mm. The JDSA is a handheld battery-operated strapping machine positioned directly onto the strap by the operator. The device automatically tensions the strap, joins the ends using friction welding technology, and cuts off the excess material. The strapping process does not require any additional metal or plastic buckles. The cordless battery-powered design allows unrestricted movement between packaged products and eliminates the need for a fixed workstation. The ergonomically designed handle provides a secure grip and improves operator control during repeated strapping cycles. The PP and PET strap tool is suitable for both individual shipment preparation and high-volume packaging operations where goods must be secured for storage and transportation. Adjustable Strap Tension The adjustable tension range of 900–3,200 N allows the operator to adapt the strapping force to the type of product being secured. The unit combines three functions in one device: Strap tensioning Friction welding Automatic strap cutting Properly selected tension helps stabilize loads and reduces product movement during handling, storage, and transportation. PP and PET Strap Compatibility The CORMAK JDSA works with both PP and PET straps, allowing the user to select the appropriate material depending on package type, load weight, and required securing strength. PP straps are mainly suitable for lighter parcels, cartons, and bundled packages. PET straps are recommended for heavier loads requiring increased tensile strength. Only straps with dimensions matching the machine specification should be used. Strap Tensioning and Friction Welding The adjustable tensioning speed of 100–200 mm/s improves efficiency when securing multiple packages and loads. After reaching the required tension, the operator activates the friction welding process. The strap ends are permanently joined, and the excess strap is automatically cut off. The approximate welding time is 2–5 seconds and may vary depending on machine settings and strap type. The process does not require additional metal or plastic seals. Actual operating efficiency depends on factors including: Selected tension force Strap type and thickness Welding parameters Operating temperature and working conditions Battery wear level A fully charged battery requires approximately 90 minutes. The cordless design makes it easier to secure large products and pallet loads that would be difficult to move to a fixed packaging station. Included Equipment CORMAK JDSA battery-powered strapping tool Li-Ion battery 14.4 V / 4 Ah Battery charger Operating manual Technical Specifications Specification Value Model CORMAK JDSA Machine Type Battery-powered strapping tool Strap Type PP / PET Strap Width 13–16 mm Strap Thickness 0.4–1.2 mm Strap Tension Force 900–3,200 N Tensioning Speed 100–200 mm/s Strap Joining Method Friction welding Approximate Welding Time 2–5 s Cedpjzq Aa Esfx Aaisha Battery Type Li-Ion Battery Voltage 14.4 V Battery Capacity 4 Ah Charging Time Approx. 90 min Cycles per Charge Approx. 250–350 cycles, depending on settings and operating conditions Tool Dimensions 380 × 130 × 130 mm

Condition: good (used), mileage: 944,786 km, power: 330 kW (448.67 HP), first registration: 03/2015, fuel type: diesel, axle configuration: 6x2, fuel: diesel, brakes: engine braking, color: grey, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2015, Equipment: AdBlue, EBS, air conditioning, cruise control, electric window regulation, electronic stability program (ESP), fog lights, fridge, power mirror, seat heater, soot filter, - Aluminum fuel tank - Brake booster - EPS - Low noise - Tipper hydraulics - Air horn - Particulate filter - Radio/CD player - Sunroof - Sleeper cab - Side door - Seat heating - Tool box Front axle: Steered; Suspension: Leaf spring Rear axle 1: Lift axle; Steered; Suspension: Air suspension Rear axle 2: Suspension: Air suspension GVW: 26,500 kg APK (Technical Inspection): valid until 11/2026 Technical condition: good Optical condition: good Reference number: 98 Vehicle number: 98 Mercedes Benz Actros 2745 / 6x2 / Tipper hydraulics / Steered + lift axle / Eu6 .: WDB9634221L916017 Suspension: Leaf / Air Transmission: Automatic Air conditioning Engine brake Rear view camera Steered + lift axle Chsdezn Al Aopfx Aaija EURO 6 - AdBlue Tipper hydraulics Special equipment: Axle load - measuring device, Ambient lighting LED, Trailer socket 15-pin 7+7-pin, Work light, Audio system: CD radio (Bluetooth), Exhaust outlet downwards to the right, CB radio, Compressed air connection in the cab, Air horns (2) on the cab roof, Suspension: Front springs 7.5 t, 2 leaves, Windshield tinted, Info display 10.4 cm, Cool box / refrigerator, Steering assist pump unregulated, Air intake behind the cab, Air deflector roof (lockable) and side, Engine brake reinforced, Auxiliary drive MB 131-2c, Parameterizable special module, Drawers under the dashboard, Seats in the cab: Driver's seat suspension seat comfort, Sun visor outside, Sun protection roller side window, Driver's door, Steel rims 11.75x22.5 (on front axle), Steel rims 9.00x22.5, 12V socket in the passenger footwell, 24V socket in the passenger footwell additionally, Carpet covering on the engine tunnel, Fleetboard preparation, Oil cooler transmission Additional equipment: Emission standard EURO 6, Axle configuration: 6x2/4, Axle load front axle 7.5 t, Actros 4, Trailer socket 24V / 15-pin, Exterior mirrors elect. adjustable and heated, Differential lock rear axle, Compressed air tank steel, Compressed air unit medium, Cab: Width 2.30 m, Cab: L StreamSpace, Cab version: StreamSpace, Lifting roof electric, Preparation comfort bunk top, wide, Cab: steel-sprung, Comfort, Cab floor with engine tunnel 170 mm, Cab: Mounting height 600 mm, Suspension: Leaf / Air, Suspension: Front spring seat aluminum, Window lift electric, Parking brake additionally on front axle, Generator 100 A, Gearbox 12-speed - Type: G 211-12, Urea tank (AdBlue): 30 L, Rear axle crown wheel 440, Integral back, Body / structure: Tractor unit, Comfort bunk bottom, Comfort locking system, Communication interface, Fender 3-piece, Fuel tank: 450 L aluminum, Radiator grille, Air compressor 2-stage, Engine 12.8 L - 330 kW R6 Diesel (OM 471), Engine compartment encapsulation, Wheelbase 2650 mm, Ramp mirror, Waste heat recovery, Disc brakes front and rear axle, Seat cover / upholstery: Fabric, Seats in the cab: Passenger swivel seat, Seats in the cab: Driver's seat backrest foldable, Voltage converter 24V / 12V 10 A, Splash guard front, Stabilizer front axle, Stowage flap outside left, Socket cab 24V, Tacho / EG control device, Door extension for cab, Underbody paneling aerodynamically shaped, Underrun protection front, Preparation toll collection, Front axle curved, Leading axle steerable / relief, Water pump regulated, Registration...

Condition: used, For sale is a high-quality 3D CNC coordinate measuring machine from the renowned manufacturer Werth Messtechnik – model Scope-Check 650×750×500/MB/Z. This device stands out for its precision, reliability, and versatility in industrial metrology. Csdpezii Dzefx Aaijha Features & Equipment: - CNC-controlled 3D coordinate measuring machine - Multi-sensor capable (optical and tactile measurements possible) - Moving-bridge design (MB/Z) for high stability and flexibility - High precision measurement of complex workpieces - Robust construction, designed for continuous industrial use - Suitable for quality control, production monitoring, and R&D applications Additional Equipment – Renishaw TP200 Probe System: The high-precision, touch-trigger Renishaw TP200 probe is ideal for workpieces with tight tolerances and complex geometries. It allows for quick probe change-outs and precise measurements even with long probe styli. Key Features: - Strain gauge technology: Minimizes deflections are registered with high accuracy; typical errors such as “lobing” are avoided - High precision: Repeatability up to 0.4 μm, 2D probing uncertainty ±0.8 μm - Fast changeover: Automatic probe change with SCR200 rack, no recalibration required - Durability: Probe module lifetime exceeds 10 million triggerings - Flexibility: Standard- (SF) and low-force (LF) modules for sensitive materials - Compatibility: Usable with Renishaw PH10 probe heads and extensions up to 300 mm Technical Specifications (excerpt): - Connection: M8 connector, PI200 interface - Probing directions: 6-way (+X, -X, +Y, -Y, +Z, -Z) - Probing force XY: 0.02 N, Z: 0.07 N - Overtravel force XY: up to 0.4 N, Z: up to 4.9 N - Weight (sensor + module): 22 g - Stylus threads: M2 Technical Data: - Manufacturer: Werth Messtechnik - Model: Scope-Check 650×750×500/MB/Z - Measuring range: X = 650 mm, Y = 750 mm, Z = 500 mm - Supply voltage: 115–230 V AC - Power consumption: max. 10 A Scope of Supply: - Werth Scope-Check 650×750×500/MB/Z - Renishaw TP200 probe system including probe modules - Accessories as shown in the attached images Important note: "The table shown in the photos is not included in the sale." (Specifications and technical details subject to change and errors!) We are happy to answer further questions by phone.

Condition: excellent (used), White Type: SC/KWT 450 Salt Spray Chamber Technical Specifications: Test chamber capacity: 450 liters Max. load: 100 kg Brine storage tank: 180 liters External dimensions: Height 920 mm, Width 1930 mm, Depth 800 mm Test chamber dimensions: Height 740 mm, Width 850 mm, Depth 570 mm Areas of application: Corrosion tests: Salt spray test: Room temperature up to +50°C Condensation test: Room temperature Up to +45°C Humidifier +75°C Temperature stability Csdpoziiy Nofx Aaijha The temperature deviation over time is ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power 2.0 kW, Rated current 8.7 A Combination: Salt spray test SS: DIN 50021 Condensation test KFW: DIN 50017 Normal climate (ventilation): DIN 50014 Weight: 180 kg Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.