Used Water Cooler for sale (8,757)

Condition: good (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Cooling water pump: with cooling water tank -Pump: Motor Schlüter 1.5 kW -Container capacity: liters -Dimensions total: 850/620/H670 mm -Weight: 124 kg Lsdpfx Akjvmxx Teqoru

Condition: refurbished (used), Fire extinguishing water tank according to DIN 14230 (underground fire extinguishing water tank): 40,000 liter fire extinguishing water tank for underground storage, single or double-walled, 1 manhole DN 600 with blind cover including seal and screws, outside with bitumen insulation - used - Tank volume: 40,000 liters / 40 m³ Length: approx. 8,720 mm Diameter: approx. 2,500 mm Weight approx. 6,600 kg Material: steel material S 235 JRG 2 The tank has a fire extinguishing water suction connection according to DIN 14244 with a mounted fire brigade coupling/fixed coupling A according to DIN 14319 in the form B version without a dipstick. The tank also has a vent flange in NW/DN 100 with a cap with a total length of approx. 1,300 mm suitable for 800 mm of earth cover and 500 mm above ground. Ledpsvmz Idjfx Akqeru The tank is emptied, cleaned and was given a bitumen exterior coating by us at the factory If desired, we can equip the tank with a full internal coating based on bitumen (against corrosion) or an epoxy resin interior coating We are happy to offer you cost-effective delivery with our own truck. Simply let us know the delivery location and you will receive the exact freight costs immediately. A viewing is possible at any time by prior appointment. Trade-in and purchase of tanks/containers is possible, just talk to us about this. We of course always have such tanks in stock in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 50,000, 60,000, 80,000, 100,000, 120,000 liters

Condition: used, Cooling unit cooling water cooler ARO type VWK 31/1-S Factory number year of manufacture 2007 Cooling capacity 3500 watts Ambient temperature max. 32°C Refrigerant R407C Refrigerant filling quantity 0.98 kg Operating pressure of cooling compressor max. 29.5 bar Water tank capacity approx. 8 liters Discharge volume of circulation pump 27 liters/min. (1620 liters/h) Ljdpjvw A T Nofx Akqjru Water connections quick release coupling Rectus type 26 Power connection 230 volts, 50 Hz, 2.2 kW - Temperature setting via DANFOSS thermostat controller - Built-in circulation pump (250 watts) Space requirement L x W x H 700 x 550 x 520 mm Weight 75 kg Good condition

Condition: used, Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump Ledpfx Asd Ergpekqjru -Connection: volts -Power kW - Delivery rate: 100 l / min -Dimensions: O 250 / H330 mm -Weight: 20 kg

Year of construction: 2001, condition: used, Tank & Environmental Protection Wozniack – Certified Specialist Company according to the Water Resources Act Dear Sir or Madam, Ljdpfx Akoc Nkyzsqoru We offer a 25,000-liter storage tank for storing water and wastewater, as follows: This is a 30 cbm storage tank made of steel. Material: S235JRG2 steel. Includes manufacturer's certificate according to DIN standard and a type plate. The container is cleaned on the inside and insulated with bitumen on the outside. Suitable for both underground and above-ground storage. Container dimensions: Length: approx. 8,390 mm, Diameter: approx. 2,000 mm, Weight: approx. 4,500 kg Shape: cylindrical Equipment: optional For use as a fire water tank, a suction line with a type A quick-coupling connector according to DIN can be offered as an additional option. Of course, you can also participate in the design of your tank system! All our systems are thoroughly inspected and checked by selected employees at our company. We also offer cost-effective delivery on request. Inspections of our systems are possible at any time. Additional tank systems for above-ground and underground storage are available in all sizes and are for sale on our premises. Have we convinced you with our offer? If you have any questions or requests, please feel free to call us; one of our experienced employees will be happy to advise you. General information: All offers are valid ex works Warstein, free of charge for loading. Delivery can be offered at a reasonable additional cost. Delivery time: immediately You will receive an invoice with VAT shown. In addition, we purchase existing tank systems and, as an approved specialist company according to the Water Resources Act (WHG), can professionally empty, clean, dismantle, and transport them. Sincerely, from Warstein Tank & Environmental Protection Wozniack Enkerbruch 2 59581 Warstein

Year of construction: 1995, condition: used, Tank & Environmental Protection Wozniack – Certified Specialist Company in accordance with the German Water Resources Act (WHG) Dear Sir or Madam, we offer a 50,000-liter storage tank for the storage of water and wastewater as follows: This is a 30 cbm storage tank made of steel. Material: S235JRG2 steel. Includes manufacturer’s certificate according to DIN standard and type plate. The container is cleaned on the inside and insulated with bitumen on the outside. Suitable for both underground and above-ground storage. Lrjdpfx Aec Nkzgekqeu Container dimensions: Length: approx. 10,900 mm Diameter: approx. 2,500 mm Weight: approx. 8,000 kg Shape: cylindrical Equipment: optional For use as a fire water tank, a suction line with a type A quick-release coupling according to DIN standard can also be offered. Of course, you can also participate in the design of your tank system! All our systems are extensively inspected and checked by selected employees in our company. We also offer a cost-effective delivery service on request. You are welcome to visit our facilities at any time. Other tank systems for above-ground and underground storage are available in all sizes and are for sale on our premises. Have we convinced you of our offer? If you have any questions or requests, please feel free to call us – one of our experienced employees will be happy to advise you. General information: All offers are valid ex works Warstein, free loading. Delivery can be offered at a reasonable cost for an additional charge. Delivery time = immediately You will receive an invoice with VAT shown. In addition, we purchase existing tank systems and can, as an approved specialist company in accordance with the German Water Resources Act (WHG), professionally empty, clean, dismantle and remove them. Sincerely, from Warstein Tank & Environmental Protection Wozniack Enkerbruch 2 59581 Warstein

Year of construction: 2018, condition: new, Condensate treatment: new Kaeser oil/water separator CF 38 Technical data: max. flow rate for oil-cooled screw compressors and oil types in climate zone 2 (= Central & Southern Europe, parts of South America, North Africa): 22.5 m³/min for the oil types S-460, MOL, MOH, PAO, VCL 29.3 m³/min for the oil type VDL Tank size (volume): 115.5 l Filling volume: 84.3 l Condensate inlet connection: 3 x DN 13; 1 x DN 25 Water drain connection: DN 40 Ljdpfxjdmqy Is Akqeru Oil drain connection: DN 40 Oil collection container: 2 x 10 l Weight: 36.5 kg Dimensions W x D x H: 530 x 764 x 1090

Year of construction: 2006, condition: like new (used), Details on request Lrsdpfefla Emsx Akqeu

Year of construction: 2001, condition: used, size 765 x 545 x 95 mm 10 units on stock Lodjvimryjpfx Akqoru - price per unit -

Condition: good (used), Oil-water separation system, condensate separator, oil and water separator, oil separator Lrodpfx Akjq Ei Dbeqou -Manufacturer: Alarm clock, oil-water separation system oil and water separator type WO 2 -Dimensions container: Ø 470 x 740 mm -Total dimensions: Ø 590 x 1160 mm -Weight: 27kg

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 305 mm, warranty duration: 24 months, power: 30 kW (40.79 HP), OMAX MAXIEM 2040 3D, 30 kW MAXIEM Pump and A-JET Tilting Cutting Head Factory-refurbished with manufacturer certification and a two-year warranty. The waterjet cutting system configuration is freely selectable. Feel free to contact us and let us know your desired configuration. Customers searching for efficient and cost-effective waterjet cutting systems will find their ideal solution in the Modular Line MAXIEM. These powerful MAXIEM systems combine operational flexibility and affordability, and can be expanded with a broad range of accessories to suit your specific cutting needs. Lodpferm Ilfjx Akqeru With the modular MAXIEM line, OMAX delivers advanced, reliable waterjet cutting technology at an economical entry price, thereby opening up the advantages of this technology to a wide array of application areas. Leasing with highly attractive terms is available on request, for example, for up to 86 months. - Accuracy up to ±0.05 mm - Software and machine components based on the latest OMAX standards With the 3D A-JET cutting head, the MAXIEM achieves cutting precision of under 0.1 mm. The 3D head enables bevel cuts up to 60° and compensates for cutting angle errors. The machine is currently being factory-refurbished; the images are thus similar to the actual offering. Prompt delivery can be arranged with INNOMAX AG.

Condition: good (used), Year of construction: 2001, I sell the 3-axis CNC working centre HOLZ-HER UNI-MASTER 7226 with beam table Year 2001. Configuration: 3-axis main spindle recently full reconditioned / Water cooled Tool magazine 6 positions HSK63 on working head 1 grooving saw X-direction Drilling head 16+4 spindles Useful working area 3100x1360mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Holzher software controller with full instructions. 2x Pump SIEMENS ELMO-L S22 2,35KW. Lredpfji U Dxuex Akqou Good condition. Available immediately.

Condition: used, Cooling unit, water-cooled condenser, DALEX Type DRF 2 Machine No. 38913719, Year of manufacture 1989 Flow rate 0.35 m3/h Cooling capacity 1950 Watts Operating pressure 2 to 3 bar Refrigerant R 134a; unit was converted from R12 to R134a Operating overpressure 18 bar Pipe connection thread 3/4" Tank volume 600 x 400 x 350 mm = approx. 80 liters Lredog D H Ruopfx Akqju Mains connection 380 Volts, 50 Hz Space requirement L x W x H 900 x 800 x 1020 mm Weight 100 kg Good condition

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 54 kW Cooling capacity: up to 300 kW medium: water up to 200°C Max. external volume: 43 ltr at 200°C max. Flow rate: max. 230 l/min  max. delivery pressure: up to 8.3 bar Motor power: up to 3 kW Dimensions LxWxH: 1,460 x 525 x 1,200 mm  Weight approx. 330kg Circulation medium connection: flange DN40 (DIN EN 1092-1), form B1 *HIGHLIGHTS EQUIPMENT: -Control and regulation Smart Controller (7" touch display) -Heating control via solid-state relay -Control box IP54, externally ventilated -Expansion tank, heater and piping stainless steel -Heating via stainless steel tubular heating elements made of Incolloy -Dirt trap (circulation) -Unit ready for connection and mounted on castors, 2 of them steerable and with brake Lredpfxsg Ey T Es Akqsu -Cooling and filling controlled by solenoid valve -configurable automatic filling via KW inflow or separate connection (factory-supplied via cooling water inflow) -flow measurement by differential pressure principle -Level monitoring by magnetic float switch -automatic temperature-dependent system closure (not with WP7-90) -flow monitoring by recording the flow rate -Bypass between flow and return with reduced cross-section -dirty filter in the cooling water inflow, filling and return of the circulation system -Continuous bypass of the heat exchanger via 3-way motorised control valve (WP7-180/200) -System pressure monitoring via pressure transmitter in the AD tank (WP7-150/180/200) -Pressure booster pump for system filling (WP7-180/200, otherwise optional) -Safety temperature limiter (STB) in the heater and flow (WP7-200) -Pressure gauge in the supply line on the back of the unit -heat-insulated circulation circuit (WP7-150/180/200) Visit our website for more details or for other performance classes. *This unit is compliant with the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: refurbished (used), 50 m³ / 50,000 l fire water tank according to DIN 14230 Tank volume: 50,000 liters / 50 m³ Length: approx. 10,700 mm Diameter: approx. 2,500 mm Weight: approx. 8,000 kg Material: Steel, grade S 235 JRG 2 Underground tank for underground storage, single- or double-walled, suitable for areas that can be walked and driven on (load class SLW 30) with 1 dome (outer diameter 720 mm) with a blind cover, gasket and screws. Available new or used, immediately! The container has been emptied, cleaned, completely overhauled and tested for leaks by us as a specialist company. The container complies with the requirements of DIN 14230 (Underground fire water tank): - Fire water suction connection according to DIN 14244 with a mounted fire hose coupling / fixed coupling A according to DIN 14319 in form B, without a level gauge connection - Vent flange stub in DN 100 with cap, with a total length of approx. 1,300 mm, suitable for 800 mm of ground cover and 500 mm above ground - Externally coated with bitumen for protection - If required, we can coat the tank with an internal full coating based on bitumen or epoxy resin (against corrosion) - It is also possible to line the container with a plastic inner liner Cost-effective delivery with our own truck is possible. Simply let us know the delivery address, and you will immediately receive the exact freight costs. Lrsdpfx Ashh Sprokqju Inspection is possible at any time by prior appointment. We can also offer trade-in and purchase of tanks/containers of all types. Please contact us for this. We also have the following sizes of these tanks constantly in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters

Condition: refurbished (used), 80 m³ / 80,000 liter fire water tank according to DIN 14230 Tank volume: 80,000 liters / 80 m³ Length: approx. 12,780 mm Diameter: approx. 2,900 mm Weight: approx. 13,250 kg Material: Steel, grade S 235 JRG 2 Underground tank for underground storage, single- or double-walled, suitable for areas that can be walked and driven on (load class SLW 30) with 1 dome (outer diameter 720 mm) with a blank cover, seal, and screws. New or used, immediately available! The container has been emptied, cleaned, completely overhauled, and inspected for leaks by us as a specialist company. The container complies with the requirements of DIN 14230 (Underground fire water tank): - Fire water suction connection according to DIN 14244 with a mounted fire brigade coupling / fixed coupling A according to DIN 14319 in the form B design without a gauging port - Vent flange stub in DN 100 with cap, with a total length of approx. 1,300 mm, suitable for 800 mm ground cover and 500 mm above ground - Externally coated with bitumen for protection - Upon request, we can coat the tank with an internal full coating based on bitumen or epoxy resin (against corrosion) - It is also possible to line the container with a plastic inner liner Cost-effective delivery with our own truck is possible. Simply let us know the delivery address, and we will provide you with the exact shipping costs immediately. Inspection is possible at any time by prior appointment. If you require further information, please call us or send us an email to b.barth(at)barth-tank.de We can also offer trade-in and purchase options for tanks/containers of all kinds; please do not hesitate to contact us. Lodpfxehh Sr Us Akqeru We also have the following sizes of these tanks in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters

Condition: refurbished (used), 150 m³ / 150,000 l fire water tank according to DIN 14230 Tank volume: 150,000 liters / 150 m³ Length: approx. 22,500 mm Diameter: approx. 3,000 mm Weight: approx. 32,000 kg Material: Steel grade S 235 JRG 2 Underground tank for underground storage, single- or double-walled, suitable for areas that can be walked on and driven over (load class SLW 30) with 1 dome (outer diameter 720 mm) with a blank cover, seal, and screws. Available new or used, ready for immediate delivery! The container has been emptied, cleaned, fully overhauled, and tested for leaks by us as a specialist company. The container complies with the requirements of DIN 14230 (Underground fire water tank): - Fire water suction connection according to DIN 14244 with a mounted fire hose coupling / fixed coupling A according to DIN 14319 in design B without a level indicator. - Vent flange stub with a cap, total length approx. 1,300 mm, suitable for 800 mm of soil cover and 500 mm above ground. Lrodohh St Ispfx Akqju - Externally coated with bitumen for protection. - Upon request, we can coat the tank with an internal full coating based on bitumen or epoxy resin (against corrosion). - It is also possible to line the container with a plastic inner liner. A cost-effective delivery with our own truck is possible. Simply let us know the delivery address, and you will receive the exact freight costs immediately. An inspection is possible at any time after prior appointment. If you require any further information, please call us or send us an email to b.barth(at)barth-tank.de. We can also accept and purchase tanks/containers of all types; please contact us for this. We also have the following sizes of these tanks constantly in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters.

Year of construction: 1996, condition: good (used), Offer: Drinking water treatment plant Water treatment plant 120 cubic meters/hour Year of manufacture: 1996 Fully functional Housed in a 6m container Control system and pumps included. Previously used to supply a container village. Ledpfxohr D Hnj Akqeru

Condition: excellent (used), Coolant pump, immersion pump, coolant pump, centrifugal pump, cooling lubricant pump Lodpfshtryxox Akqjru -Manufacturer: Grundfos, coolant pump type SPK1-11/8 AAA -Drive: 0.25 kW 2850 rpm -Max. flow rate: 1.0 m³/h -Max. delivery head: 22 m Maximum temperature: 90 °C -Dimensions: 180/150/H590 mm -Weight: 11 kg

Condition: used, Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Cooling water pump: with cooling water tank -Pump: Unfortunately the type is no longer readable -Container content: approx. 25 liters -Total dimensions: 420/360/H3500 mm Lredpfx Aeqbycbskqsu -Weight: 13 kg

Condition: good (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Cooling water pump: with cooling water reservoir -Pump: Manufacturer Elpu Type N 120 -Power: 0.085 kW -Speed: 2800 rpm Lrodpfxoif Sats Akqju -Dimensions: 570/540/H370 mm -Weight: 24 kg

Condition: used, Year of construction: 1993, machine/vehicle number: 5/4573, total width: 7,500 mm, total height: 11,400 mm, overall weight: 45 kg, The cost-effective drainage of condensate for your compressor. The oil is separated from the water with a filter set (ATTENTION: filter set is not included in the scope of delivery) The purified water (only in conjunction with the filter set) is approved for discharge into the sewer. Guarantee and warranty are excluded in this advertisement. Price on request. Ljdpoqmmaljfx Akqjru

Year of construction: 2013, condition: good (used), machine/vehicle number: 3063, The cost-effective drainage of condensate for your compressor. The oil is separated from the water with a filter set. The filter set is included in the scope of delivery. Lodpfx Akjqmmffjqoru The purified water (only in conjunction with the filter set) is approved for discharge into the sewer. Guarantee and warranty are excluded in this advertisement. Price on request.

Condition: used, Air cooler, evaporator, cold room, industrial cooler, cooling unit, cooler, water cooler, cooling system, refrigeration, cold storage, refrigerated container, cold room, heat exchanger Lrodpfxjqva Nys Akqeu -Manufacturer: Goedhart, industrial cooler type DVS-O 614010 -Fan diameter: 400 mm -Operating pressure: max. 5 bar -Operating temperature: max. 50°C -Dimensions: 1410/1170/H700 mm -Weight: 129 kg

Condition: good (used), oil-water separation system, condensate separator, oil and water separator, oil separator, separator, oil/water separator, oil/water separator -Manufacturer: Kaeser, oil-water separator Lsdpfx Akev Aip Ujqjru -Type: Aquamat 4 -Dimensions: 530/480/H1000 mm -Weight: 22 kg