Used Water Pumps Germany for sale (23,918)

Condition: refurbished (used), 150 m³ / 150,000 l extinguishing water tank according to DIN 14230 Tank volume: 150,000 liters / 150 m³ length: approx. 22.500 mm diameter: approx. 3.000 mm Weight: approx. 32,000 kg Material: steel material S 235 JRG 2 Underground tank for underground storage, single or double walled, suitable for walkable and drivable areas (load class SLW 30) with 1 dome (outer diameter 720 mm) with blind cover, seal and screws. New or used immediately available! The tank is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The tank complies with the regulations of DIN 14230 (underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted fire department coupling /fixed coupling A according to DIN 14319 in the design form B without gauge connection - Venting flange connection in NWN 100 with cap in a total length of approx. 1,300 mm suitable for 800 mm ground cover and 500 mm above ground - Outside provided with a bitumen coating for protection - On request we can provide the tank with a full interior coating on a bitumen basis or epoxy resin interior coating (against corrosion) - It is also possible to line the tank with a Dkjdpjhh St Iofx Ah Uew with a plastic inner cover A cost-effective delivery with our own truck is possible. Just tell us the place of delivery, you will immediately receive the exact freight costs. An inspection is possible at any time after prior appointment.

Year of construction: 2025, condition: new, functionality: fully functional, Ice water facility L 100 model Recommended batch size up to: 30 liters Dkedpfxefmcikj Ah Uow Continuous output * (cooling output): 60 liters Peak cooling performance * with ice bank: 180 liters / h Ice bank: 20kg Cooling capacity (CECOMAF) t = -5 ° C: 1189 W Voltage: 230V; 50Hz Power consumption: 575W Water connection: 1/2 " Water flow at 2 bar: 8 liters / min Device dimensions L x W x H mm: 950 x 530 x 560 Weight empty / operation approx .: 60kg / 130kg Energy consumption at 100 liters: 1-2 KWh NEW device with warranty * with + 17.5 ° C inlet and + 2.5 ° C outlet. Technical changes reserved. Option: Underframe Visit us at the Milbrandt outlet shop

Condition: used, Year of construction: 1998, KNAAK PUMPEN Dkodpfsxrtlbsx Ah Ujw Year of manufacture approx. 2001

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: TET602P3-20 - 2200382975, cooling capacity: 116 kW (157.72 HP), type of input current: three-phase, type of cooling: water, overall weight: 1,773 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 19.8 m³/h, pump pressure: 3.37 bar, total width: 1,255 mm, total length: 3,294 mm, total height: 2,119 mm, warranty duration: 3 months, Equipment: type plate available, Process chiller / air-cooled water chiller unit, Type: TAEevo Tech 602 P3-20 MTA S.p.A. The TAEevo Tech 602P3-20 is a compact water chiller unit designed for outdoor installation (operating range: -20°C to +46°C). Includes crankcase heater, phase monitoring, electronic expansion valve, 500-liter buffer tank, integrated P3 circulation pump, and winter package for -20°C (condenser pressure control). Chilled water outlet temperatures adjustable from -10°C to +30°C. Cooling capacity: 116 kW Chilled water temperature out/in: 7 / 12°C Flow rate: 19.8 m³/h Available pump pressure (bar): 3.37 Ambient temperature °C: 32 Refrigerant: R 410A Dkodpfoxpuz Sex Ah Uow Electrical data: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Max. power input (kW): 60.99 Max. current (A): 102.78 Starting current (A): 218.51 Protection class: IP54 Dimensions: Length (mm): 3,294, Width (mm): 1,255, Height (mm): 2,119 Weight (kg): 1,773 Connection: Rp 2½" Serial No.: 2200382975 Year of manufacture: 2022 Condition: Cosmetic: grade 2, Technically: ok (tested) Used Used machines may show cosmetic wear due to previous use. (Technical modifications and prior sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: ready for operation (used), Year of construction: 2000, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 00, cooling capacity: 30 kW (40.79 HP), type of input current: three-phase, type of cooling: water, ambient temperature (max.): 40 °C, ambient temperature (min.): 5 °C, input voltage: 400 V, pressure: 3 bar, pump pressure: 3 bar, Water coolers connected to a single central water supply; coolers can also be used with an internal water tank For sale due to surplus capacity Dodpsxphazofx Ah Ujkw Coolers recently serviced and converted to R422D (next service Sept 2025) Coolers are still operational and can be shut down at any time Total of 2 units for sale

Condition: good (used), Salmson Priuxmaster D4080 Circulating pumps 4x Dedpsqqhhqjfx Ah Uskw

Condition: refurbished (used), 80 m³ / 80,000 l extinguishing water tank according to DIN 14230 Tank volume: 80,000 liters / 80 m³ length: approx. 12.780 mm diameter: approx. 2.900 mm Weight: approx. 13,250 kg Material: Steel material S 235 JRG 2 Underground tank for underground storage, single- or double-walled, suitable for walkable and drivable areas (load class SLW 30) with 1 dome (outer diameter 720 mm) with blind cover, seal and screws. New or used immediately available! The tank is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The tank complies with the regulations of DIN 14230 (underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted fire department coupling /fixed coupling A according to DIN 14319 in the design form B without gauge connection - Venting flange connection in NWN 100 with cap in a total length of approx. 1,300 mm suitable for 800 mm ground cover and 500 mm above ground Djdohh Sr Ujpfx Ah Uskw - Outside provided with a bitumen coating for protection - On request we can provide the tank with a full interior coating on a bitumen basis or epoxy resin interior coating (against corrosion) - It is also possible to line the tank with a with a plastic inner cover A cost-effective delivery with our own truck is possible. Just let us know the place of delivery, you will immediately receive the exact freight costs. An inspection is possible at any time after prior appointment.

Condition: new, The Opal Waterjet cutting system is the answer to particularly high demands for precision without thermal influence on demanding contours. Thanks to a wide range of equipment options and a powerful high-pressure pump, the cutting system is suitable for practically all available materials, such as steel, stone, wood, etc. up to a material thickness of 250 mm. The optionally available ProX 3D cutting head provides additional possibilities in 3D processing. Furthermore, we offer extensive additional equipment, such as desludging systems. Main features - Versatile application possibilities - Absence of slag formation during the cutting process minimizes the amount of finishing work - Optionally pure water cutting or with abrasive - Assembly of up to 4 cutting heads for parallel cuts - Pump capacity individually adapted to the respective application Technical data Djdjfz Di Aepfx Ah Ujkw Drive Servo AC Available working widths 1.000 - 6.000 mm Available working lengths 1.000 - 12.000 mm Cutting height 2D 0.5 - 250 mm Cutting height ProX 3D 0.5 - 150 mm positioning speed 20,000 mm/min Safety module DIN-EN 13850 Electrical components DIN-EN 81346 Working - ambient temperature + 5 °C to 45 °C Working - Humidity max. 90%

Condition: used, functionality: unexamined, machine/vehicle number: MTRE 15-9/5 | 10-10/10 | 5-10/10, Used Grundfos MGE112MC2 Centrifugal Water Pumps Manufacturer: Grundfos Various configurations: Pump MTRE 15-9/5 | Controller MGE112MC2 Pump MTRE 10-10/10 | Controller MGE132SD2 Pump MTRE 10-10/10 | Controller MGE112SB2 Pump MTRE 5-10/10 | Controller MGE1100LC2 Weight: varies from 42 to 74 kg. Power: ranges from 4.0 to 7.5 kW Dksdpfx Ahexphqts Uow Voltage: 50/60 Hz, 380-400 Volt.

Condition: used, Technical details: Dkjdpfexraxhox Ah Ujw hydraulic pump: 380 V 50 Hz 0,85 kW weight of the machine ca.: 56 kg dimensions of the machine ca.: 600 x 400 x 650 mm max. working pressure: 400 bar cycle time : 1-60 per min. control voltage: 24 V

Condition: good (used), Year of construction: 2001, operating hours: 1,858 h, functionality: fully functional, Falch T5H hot water, 500 bar, 30 liters, new TÜV and SERVICE, incl. accessories! Djdpfx Ahsxqggpo Uokw

Condition: excellent (used), Year of construction: 1995, FLUIDPROGRESS mobile hydraulic power supply unit 1.6dm3/min 160bar Type: 25TE1.6 160/JD 24V Year of construction approx. 1995 Nominal operating pressure: 120 bar three section system. Operating pressure: max 160 bar Flow rate: approx. 1.6 dm3/min. Tank capacity: 200 liters Dkedpfx Ahoi Dnpxe Ujw Engine power: 0.75 kW Mains connection: 380 volts, 50 Hz Electric hydraulic valve ATOS ORSTA hydraulics Space requirements Length: 1020 mm, width: 610 mm, height: 1000 mm Own weight: approx. 250 kg If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: refurbished (used), Extinguishing water tank according to DIN 14230 (underground extinguishing water tank): 100,000 liter extinguishing water tank for underground storage, single or double walled, 1 manhole DN 600 with blind cover incl. seal and screws, outside with bitumen insulation - second-hand -... tank volume: 100.000 liters / 100 m³ length: approx. 15.750 mm diameter: approx. 2.900 mm weight: approx. 11.600 kg Material: steel material S 235 JRG 2 The tank has an extinguishing water suction connection according to DIN 14244 with a mounted fire department coupling/fixed coupling A according to DIN 14319 in the design form B without gauge connection. Furthermore, the tank has a venting flange connection in NW/DN 100 with cap in a total length of approx. 1,300 mm suitable for 800 mm ground cover and 500 mm above ground. - The tank is emptied, cleaned and has been provided with a bituminous exterior coating by us at the factory. On request, we can provide the tank with a bitumen-based full interior coating (against corrosion) or epoxy resin interior coating We can offer you a cost-effective delivery with our own truck. Just let us know the place of delivery, you will immediately receive the exact freight costs. An inspection is possible at any time after prior appointment. If you need any further information, just give us a call or send us an e-mail to b.barth(at)barth-tank.de. Trade-in and purchase of tanks/vessels is possible, just contact us. We have such tanks of course also in the following sizes constantly in stock: - 10.000, 13.000, 16.000, 20.000, 25.000, 30.000, 40.000, 50.000, 60.000, 80.000, 120.000 liters. Dkodpfx Ahoi Enwvs Uew

Condition: new, Opal WaterJet Combo is the only machine in the world that combines the advantages of ultra-fast plasma cutting technology and the accuracy of waterjet cutting. The synergy of the possibilities offered by both technologies allows you to take full advantage of all the benefits. Thanks to its universal application and extensive equipment options, the Opal WaterJet Combo has proven itself in both large factories and small operations. Main features - Innovative, patented use of water jet and plasma technologies - Enables fully automatic cutting with both cutting methods - Up to 10 times the cutting speed of conventional water jet systems - Reduction of production costs of up to 70%. - Universal tool for cutting all types of material - Possibility of using the ProX 3D cutting head - Flexible use of the preferred cutting technologies during cutting for the respective component - Optional cutting with pure water or abrasive General technical data Drives: Servo AC Dkodpfx Ahjf Ak Uge Usw Available working widths: 1.000 - 6.000 mm Available working lengths: 1.000 - 12.000 mm Material thickness - Water jet 2D: 0.5 - 250 mm - Water jet 3D: 0.5 - 150 mm - Plasma: depending on plasma source Quality plasma sheaths: DIN-EN ISO 9013 positioning speed: 20,000 mm/min Positioning accuracy: DIN-EN 28206 Security module: DIN-EN 13850 El

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: AST2 140 HE - 2200358437, cooling capacity: 371 kW (504.42 HP), type of input current: three-phase, type of cooling: water, overall weight: 3,271 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 3 bar, temperature: 7 °C, volume flow: 63.5 m³/h, pump pressure: 2.33 bar, total width: 2,191 mm, total length: 3,465 mm, total height: 2,423 mm, warranty duration: 3 months, Equipment: type plate available, Process chiller / air-cooled water chiller Type: Aries TECH - AST2 140 HE Manufacturer: MTA S.p.A. The Aries TECH AST2 140 HE are compact water chillers designed for outdoor installation (from -20°C to +48°C), equipped with four scroll compressors, compressor isolation valves, crankcase heater, phase monitoring, P2 pump, 710-liter tank, electric frost protection heater, condenser filter, control and switch cabinet, and a complete housing. Cooling capacity (kW): 371 Chilled water outlet/inlet temperature (°C): 7 / 12 Flow rate (m³/h): 63.5 Available pump pressure (bar): 2.33 Ambient temperature (°C): 32 Refrigeration circuit: Refrigerant: R410A Number of circuits: 2 Number of compressors: 4 Capacity steps (%): 0-25-50-75-100 Electrical data: Voltage (V): 400, Frequency (Hz): 50, Phases: 3 Max. power consumption (kW): 187 Max. current (A): 300 Starting current circuit (A): 633 Protection class: IP54 Dimensions: Length (mm): 3465, Width (mm): 2191, Height (mm): 2423 Weight (kg): 3271 Dsdpfx Ahjxn Sxxj Ujkw Connection: DN 125 (Victaulic) Serial No.: 2200358437 Year of manufacture: 2020 Condition: Cosmetically 2, technically OK (used unit) Price: On request in EUR (plus VAT, ex Nettetal) – 3 months warranty Used machines may have visual defects due to previous use. (Technical changes and intermediate sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: used, Cooling water pump Make of Grundfos Type SK 4 15 / 5 2840 RPM. Flow rate 40-80 litres Dkedjc Unydepfx Ah Uow Pumping height 27-18 metres

Condition: used, Year of construction: 1995, SIDEL SBO10- blowing machine SBO10 is intended to manufacture PET bottles. Its production rate can be up to 10.000 bottles per hourdepending on the capacity. As first step, the operator puts the preform bin, via trans pallet or forklift, in the hoisting and tipping unit (SAMETO brand) and the preforms inserts in the hopper. After that, the elevator transfers the preforms to the horizontal elevator, the unscrambler and the final gravity guide (infeed rails).The below schematic diagram describes the general process of SBO10 machine: which consists of: 1. Preform infeed rails 2. Preform infeed wheel 3. Infrared oven 4. Preform transfer wheel 5. Blow wheel 6. Bottle transfer wheel 7. Bottle evacuation GENERAL Presentation 1. Infeed of cold preforms Cold preforms are inserted by an inclined ramp. They are hung by the neck and are guided by two rails between which they are lowered by gravity. 2. Preform heating linear oven The preforms, grasped in the spindles at the neck, are turned 180 degrees so that they are head down and are made to rotate as they pass in front of infrared lamps. The linear oven has 10 heating modules. Each oven module has 8 infrared lamps. Ath oven exit, an infrared camera reads the preform temperature so as the automatic regulation of all the areas coming under its control. 3. Hot preform transfer wheel A transfer wheel with 6 arms conveys the hot preforms through the blowing moulds when they leave the oven. 4. Preform ejection An ejection system is mounted after the preform transfer wheel, in case of a non correct temperature of a preform. 5. Blow wheel Preforms are put in the mould for which opening and closing are assured by a system of connecting rods operated by a cam. The mould is locked by a mechanical device. Blow nozzle guides the stretching rod, which ensures longitudinal orientation. A set of cameras synchronizes the whole process. The moulds are controlled for temperature by chilled water circulation. 6. Bottle transfer wheel A transfer wheel with 6 arms picks up the bottles in the moulds to evacuate them from the blowing wheel. 7. Bottle ejection An ejection system is mounted after the bottle transfer wheel. It is completed by a set of photocells. If the bottle is not correct, it is ejected. 8. Bottle outfeed wheel. An outfeed wheel with 8 notches receives the bottles comes from the transfer arms and puts them down on a belt. They are held by guides. The bottle outfeed can be linked to a conveyor system. - Hoisting and tipping unit (1996) - Hopper (1995) - Elevator (1995) - Orienting rollers (1995) - Unscrambler (1995) - Gravity rails (1995) - linear oven (1995) - Blow wheel with 10 moulds (1995) - Bottle outfeed wheel (1995) - Operator control panel (1995) - Electrical cabinets (1995) 12. Chiller (1998) Energy and fluid consumption 1. Electricity Dsdpfx Aoxlm Nysh Uskw Max supplied power: 216kW Average consumption: 120 to 160 kW/h according to item Voltage: 380 (3phase) Frequency: 50/60 Hz 2. Compressed air Supplied power: from 7 to 35 bar Control air pressure: 7 bar flow: 60 to 125 Nm3/h according to item Air quality: dry air, deoiled and filtered to 0,1 ppm Spherical base pressure: up to 25bar flow: 170 to 830 Nm3/h Free standing base pressure: up to 35 bars flow: 235 to 1.100 Nm3/h 3. Chilled water temperature: 10 to 12 celsium degrees pressure: 5 to 6 bars flow: up to 9 m3/h calories to be removed: up to 22.000 Kcal/hour Max supplied power: 216kW Voltage: 380 (3phas...

Condition: excellent (used), FLUTEC hydraulic ring hydraulic unit pump type: Flutec PT-300/2.0 23cm3/min max 350bar axial piston pump: Parker PV032R Year of construction approx. 1998 Dkedpsk Nmlyofx Ah Usw Nominal working pressure: max 350 bar three-part system. Flow rate: approx. Tank capacity: 150 liters Motor power: 5.5 kW Mains connection: 380 volts, 50 Hz Electric hydraulic valve SEF 5-25 65lit/min Space requirement Length: 800 mm, width: 650 mm, height: 1000 mm Own weight: approx. 300 kg

Condition: like new (used), Refrigeration unit 14 kW Dsdpfxexfk Tcs Ah Uokw

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, 24-head, triblock automatic PET bottle filling machine, fully functional. Selling due to purchase of a higher-performance machine. Offer includes: 24-head filling machine, rinser, filler, capper, 3000 liters/hour Additional machines available for separate purchase: 8-head semi-automatic filling machine Liquid cooler Machines can also be purchased individually. The machine has already been disassembled and is awaiting its new owner in a clean warehouse. Dksdpfx Ahjwxy I Es Ujw We will assist with loading onto the truck. If required, we can assemble and commission the machine for the new buyer.

Condition: used, Year of construction: 2024, functionality: fully functional, machine/vehicle number: TET301P3-20 - 2200414604, cooling capacity: 59.3 kW (80.63 HP), type of input current: three-phase, type of cooling: water, overall weight: 1,063 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 10.1 m³/h, pump pressure: 3.14 bar, total width: 866 mm, total length: 2,250 mm, total height: 2,054 mm, warranty duration: 3 months, Process Chiller / Air-cooled Water Chiller Type: TAEevo Tech 301 P3-20 Manufacturer: MTA S.p.A. The TAEevo Tech 301P3-20 are air-cooled compact water chillers suitable for outdoor installation down to -20°C. Includes crankcase heater, electronic expansion valves, phase monitoring, 350-liter buffer storage tank, integrated P3 circulation pump, and winter package (condenser pressure regulation). Chilled water outlet temperatures adjustable from -10°C to +30°C. Cooling capacity: 59.3 kW Chilled water temperature outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 10.1 Available pump pressure (bar): 3.14 Ambient temperature (°C): 32 Refrigerant: R410A Electrical data: Voltage (V): 400 Frequency (Hz): 50 Phases: 3 Max. power consumption (kW): 31.48 Max. current (A): 53.94 Starting current circuit (A): 168.31 Protection class: IP54 Dimensions: Length (mm): 2250 Width (mm): 866 Height (mm): 2054 Weight (kg): 1063 Connection: Rp 2" Serial number: 2200414604 Year of manufacture: 2024 Condition: Visual grade 2, Technically OK Used Due to prior use, used machines may show visual defects. Djdpfxexn Su Tj Ah Uekw (Technical modifications and prior sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: excellent (used), Year of construction: 1996, operating hours: 470 h, functionality: fully functional, power: 120 kW (163.15 HP), Diesel water pump set, Sprinkler aggregate Dsdpfxef Aa Aqo Ah Uskw Manufacturer: SISU Type: 420DSJPL Year of c.: 1996 Output: 120 kW, 2940 rpm Pump: Mx125-250 Capacity: 358 m3/h Total head: 86 m Power: 110 kW Weight: 1200 kg Operating hours: cca 473 hours The turbo and the exhaust manifold are missing. If you need more information. We are here to help! Please contact us using the form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: TET351P5-offAD-Bypass - 2200373733, cooling capacity: 66 kW (89.73 HP), type of input current: three-phase, type of cooling: water, overall weight: 1,082 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -5 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 11.2 m³/h, pump pressure: 4.68 bar, total width: 866 mm, total length: 2,250 mm, total height: 2,054 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process chiller / air-cooled water chiller, Type: TAEevo Tech 351 P5-offAD-Bypass MTA S.p.A. Chiller, water chiller; cooler TAEevo Tech 351 P5-offAD-Bypass are air-cooled compact water chillers suitable for outdoor installation down to -5°C. Includes crankcase heater, electronic expansion valves, phase monitoring, 350-liter buffer tank, and integrated P5 high-pressure pump. Special features: Dksdpewlt Raefx Ah Ujw - Open fill system / attached tank - Bypass with manual valve between water inlet and outlet Chilled water outlet temperatures adjustable from -10°C to +30°C. Cooling capacity: 66 kW Chilled water temperature outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 11.2 Available pump pressure (bar): 4.68 Ambient temperature (°C): 32 Refrigerant: R 410A Electrical data: Voltage (V): 400, Frequency (Hz): 50, Phases: 3 Max. power consumption (kW): 39 Max. current (A): 68 Start-up current circuit (A): 213 Protection class: IP54 Dimensions: Length (mm): 2250, Width (mm): 866, Height (mm): 2054 Weight (kg): 1082 Connection: Rp 2" Serial no.: 2200373733 Year of manufacture: 2021 Condition: Visual 2, Technical OK used (Subject to technical changes and prior sale!) Location: MTA Deutschland GmbH, 88131 Lindau Used machines may have visual imperfections due to their usage. (Subject to technical changes and prior sale!)

Condition: excellent (used), Year of construction: 2005, power: 225 kW (305.91 HP), fuel type: diesel, type of cooling: water, Regularly maintained Volvo Diesel fire water pump for sale in new condition Machine hours: 298 inspection and oil change at all maintenance intervals, regardless of use. Dsdpehfl Dmofx Ah Ujkw Manufacturer: Kagema DPA Engine: Volvo Penta TWD 710 V 218 kW / 296 HP 6-cylinder diesel engine Data: Manufacturer: Volvo Penta Type: TWD 710 V. Spec.NO .: 868725 Serial number: 2071093240 Vermogen: 225 kW / 304hp Speed: 2450 rpm Fuel: diesel Length: 330 cm Width: 120 cm Height: 220 cm tank: 400liter water transport ca: 800-900m3 6.5 bar pressure water pump type: KSR-MXN 150-315 "missing" Purchase of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Condition: good (used), SANYO Water Heat Exchanger Model: SGP-WE170J2 Power source: 220-240 V AC, 1 phase, 50 Hz Maximum electrical power: 9 kW, 0.05 A (continuous operation) Device protection: IP24 Cooling capacity: 50 kW Heating power: 60 kW Heat input (HS) (cooling): 43.5 kW Heat input (HS) (heating): 46 kW Refrigerant: R407C Design pressure high pressure side: 30 bar Design pressure low pressure side: 16 bar Dksdpfsd Tlixex Ah Uow If you need more information. We are here to help! Please contact us using the form or give us a call Your ad has been automatically translated. Translation errors are possible