Used Wave Soldering System for sale (40,633)

Condition: used, Laserline Type: LPC03 Lascon laser system with Lascon controller LPC03 Laserline diode laser The diode laser ›LDM 500-60‹ has a wavelength of 935 nanometers and an output power of 550 watts. Laser type: LDM 500-60 Wavelength of 935 nanometers +/- 10% Laser power: 550 W Supply voltage 100-264V +/- 10% Max. power consumption 1.7 kW Codpfx Akezdqkrstori Frequency 1 phase 47-63 Hz Laser class 1 Type: LDM 500-60 Lascon controller LPC03 The LPC03 has the processing power of a complete PC in a very small space. Instead of a hard drive, a removable flash disk has been installed. Due to the elimination of the hard drive and the extremely low heat generation, the LPC03 is therefore ideally suited for tasks in the field of measurement, control and regulation in an industrial environment. The fiber-coupled MA pyrometers QP004 and EP004 can be easily integrated into the device. The fiber optic cable is then simply connected to the rear panel. The housing also provides space for the PCI card PCI-1P. In conjunction with the LASCON measurement and control system, the operating system and software are installed on the flash disk. Technical data: Motherboard: Half Size CPU card Slots: 1 x PCI, length max. 180 mm Drives: none Storage medium: removable flash disk Connections: USB front; Ethernet, RS232, VGA, keypad, mouse, USB rear Housing: 212 mm x 80 mm x 250 mm (height x width x depth) Protection class: Front: IP40 Environment: 15°C - 40°C Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Item: inos iSENS laser sensors Item: inos iSENS laser sensors with control unit, cable, PC interface Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) Crodpszdn T Rofx Aktji We will gladly answer any further questions you may have over the phone.

Condition: used, Bosch Type: XR31-3 Description: Delta pick and place robot Manufacturer: Bosch Product type: Sigpack Systems XR31-3 Designation: Delta pick and place Year of manufacture: 2008 Pads/cycle (min): 185 Max. acceleration (g): 0.455 Cycle time (s): 0.32 Working area (mm): 48 x 9.2 Maintenance rate: None Assembly time (h): 2.5 Scope of supply: Crsdpfx Akozdrzretsi 1 x Delta robot XR 31-3 Manz operating panel pendant P51 1 x Rotary gripper Condition: used (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, TOX Csdjzdtffopfx Aktori Type: TZ-VSN TOX – Full-Punch Riveting System The full-punch rivet initially separates all joining partners and then pushes the punched-out section out of the joining point. With its innovative technology for full-punch rivets, TOX PRESSOTECHNIK, the specialist for sheet metal joining, is expanding its range of products and services to include a future-oriented process. Full-punch riveting offers an additional mechanical sheet metal connection that is of great importance for lightweight construction and the joining of hybrid parts and assemblies. The rivet feeders, tongs, and tool holders are also designed to be so universal that full-punch rivets with diameters of 4.0 mm and lengths between 3.3 and 8.1 mm, as well as full-punch rivets with diameters of 5.0 mm and lengths between 3.9 and 9.0 mm, can be processed flexibly with both TOX hand tongs and TOX robot tongs. Press force: 55 kN Total stroke: 140 mm Rivet type: Diameter 5 x 4.6 Connection values Power: 3.4 kW Mains connection: 400/15/50-60 V/A/Hz Speed: 200 mm/s Mains type: 3P+N+PE Control voltage: 24 V DC Pre-fuse: 25 A Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), mileage: 695,160 km, power: 265 kW (360.30 HP), first registration: 05/2008, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro4, number of seats: 2, Structure Construction year: 2008 = More information = General information Year of construction: 2008 Cab: single Registration number: 2EBR229 Technical information Number of cylinders: 6 Front axle: Steering Rear axle: Double wheels Weights Empty weight: 14.880 kg Carrying capacity: 4.120 kg GVW: 19.000 kg Functional Water tank: Yes Condition Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) Crsdpsy Rfu Usfx Aktoi BIC/SWIFT: INGBNL2A

Condition: excellent (used), mileage: 148,777 km, power: 552 kW (750.51 HP), first registration: 06/2024, fuel type: diesel, axle configuration: 6x2, wheelbase: 6,570 mm, fuel: diesel, fuel tank capacity: 1,000 l, color: grey, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Equipment: ABS, AdBlue, Bluetooth, air conditioning, airbag, central locking, cruise control, electric window regulation, fog lights, navigation system, onboard computer, parking heater, power assisted steering, power mirror, traction control, trailer coupling, = Additional Options and Accessories = Credpfxoy Thr Io Aktsi - Adaptive Cruise Control - Aluminum Fuel Tank - High Beam Lights - Low Noise - Speed Limiter - Cab - Refrigerator - Leather Interior - Leather Upholstery - Air Suspension - Air-Suspended Seats - Media System - Metallic Paint - Rotating Beacon - Reversing Camera - Sleeper Cab - Sun Visor - Lane Keeping Assist - Auxiliary Heater - Toolbox - Power Take-Off (PTO) - Central Lubrication System - Tow Hitch = Additional Information = General Information Year of Construction: 2024 License Plate: 19-BXV-1 Technical Information Number of Cylinders: 6 Engine Displacement: 16,123 cc Transmission: I SHIFT, Automatic Front Axle: Steerable Rear Axle 1: Dual Tires; Lift Axle Weights Unladen Weight: 13,669 kg Payload: 18,331 kg GVW: 32,000 kg Functional Body Brand: VDL S 26 Pump: Yes Interior Upholstery: Leather Condition Technical Condition: very good Optical Condition: very good VOLVO FH 16 750 6X2 VDL CONTAINER TIPPER EURO 6 L PACKAGE 750 HP DRIVE 6X2 WHEELBASE 520 CM AIR SUSPENSION DIFFERENTIAL LOCK I-SHIFT AUTOMATIC VOLVO ENGINE BRAKE PLUS SLEEPER CAB WITH AIR CONDITIONING DRIVE ALERT CONTROL (COLLISION WARNING) LANE KEEPING ASSIST SIDE VIEW CAMERA AUXILIARY HEATER 27MC, MEDIA, TOOLBOX TRAILER COUPLING VDL S-26-6600 HOOKLIFT SYSTEM HYDRAULIC CONTAINER LOCKING HOOK HEIGHT 145 CM

Year of construction: 1992, condition: used, functionality: fully functional, machine/vehicle number: 029.700, Painting/drying booth from Luft- und Trockentechnik GmbH, type KSP 6-BT, manufactured in 1992. The system is suitable for painting and drying workpieces and features an integrated exhaust/extraction system. Technical data: Manufacturer: Luft- und Trockentechnik GmbH Type: KSP 6-BT Year of manufacture: 1992 Manufacturer's number: 029.700 Usable volume: approx. 72 m³ Total volume: approx. 81 m³ Minimum exhaust air volume flow: 1,440 m³/h Maximum permissible oven temperature: 90 °C Maximum solvent quantity: 4,302 g/oven load The painting booth has dimensions of 6 x 4 meters. Credpfx Aez D Evyjktei The system includes an exhaust duct with extraction via the roof. In addition, a suspension/transport system is located in the ceiling area, to which workpieces or painting racks can be attached and moved through the work area. Dismantling will be carried out by the buyer.

Condition: used, Year of construction: 2007, Overview This KHS Corvus is a skid-mounted cartridge filtration system (microfiltration), built in 2007 by KHS AG in Dortmund, Germany. Four stainless steel KHS cartridge filter housings for 40-inch cartridges are connected through a pneumatically operated valve manifold and controlled from the skid's own stainless steel control cabinet with Siemens PLC. The Corvus range is designed for clarifying filtration, cold sterile filtration and safety filtration of wine, beer and water ahead of the filler. This unit was last used for wine filtration in a bottling line. Technical data - Manufacturer: KHS AG (Dortmund, Germany) - Model: Corvus - Year of manufacture: 2007 (filter housings 2006) - Machine type: cartridge filtration system (microfiltration), skid-mounted - Filter housings: 2 housings for 19 cartridges of 40 inch, 143 L each; 2 housings for 12 cartridges of 40 inch, 108 L each - Housing design ratings: max. 10 bar at up to 90 °C, max. 2 bar at 121 °C - Material: stainless steel - Overall dimensions: approx. 3,600 x 1,700 x H 3,750 mm Equipment - 4 CE-marked KHS cartridge filter housings - Pneumatically operated valve manifold with stainless steel piping - Pressure gauges and process instrumentation Crsdsz Hb Scspfx Aktji - Stainless steel control cabinet with Siemens PLC and pneumatic valve terminals - Stainless steel skid frame with mesh safety guarding Condition Used. Still installed and can be inspected by appointment. Availability Immediately. Location: Belgium.

Condition: used, Höcker Polytechnik frequency-controlled extraction system with an RSN ECO 40/12 briquetting press, designed to extract wood shavings and sanding dust from a small to medium-sized joinery or other woodworking workshop, complete with a connected hopper and briquetting press. Includes heat recovery and a number of extraction pipes with pneumatic dampers, suitable for equipping a workshop with approx. 5–10 machines. Technical data: - Fan 1: 11 kW - Fan 2: 3 kW Crsdpfx Aksztvwistsi - Press: 4.5 kW - Filter bags: 50 - Briquette: ~ 60 x 40 mm - Filter area: ~ 54 m² - Air flow rate: ~ 3,200 m³/h

Condition: used, Year of construction: 2009, functionality: fully functional, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, suction capacity: 6,000 m³/h, intake manifold diameter: 300 mm, filter area: 28 m², total height: 2,500 mm, total length: 3,150 mm, total width: 1,030 mm, overall weight: 900 kg, Wood chip extraction system, dust extraction system, self-cleaning filter, vacuum system – Hoecker Polytechnik brand. Cedpfxez Nxxas Aktjri Model: Vacumobil JT 300 – with pneumatic cleaning of filter bags using compressed air during operation. Year of manufacture: 2009 Fan power: 7.5 kW Capacity: 6,000 m3/h Filtration area: 28 m2 Air return Dust tank capacity: 495 liters Equipped with an automatic fire suppression system Inlet diameter: 300 mm Stock number: 1172

Condition: used, RMS   Vibration exciter / Vibration testing system   RMS SW 6005 Vibration exciter, sold exclusively as a source of spare parts   For sale is a used vibration exciter from RMS Regelungs- und Messtechnik.   The device is sold explicitly and solely as a source of spare parts. Its functionality has not been tested. Operational readiness or completeness is not guaranteed. Codpez Iqigefx Aktori   Technical data:   Manufacturer: RMS Regelungs- und Messtechnik Designation: Vibration exciter Type: SW 6005 Year of manufacture: 1983   Voltage: 30 V Current: 200 A Force: 11,770 N Vibration amplitude: ± 13 mm Velocity: 1.2 m/s Acceleration: 100 g   Weight: approx. 700 kg (estimated)   Equipment:   RMS vibration exciter SW 6005 Mounting surface with threaded holes Pneumatic vibration isolation Lateral spring elements Pneumatic components Control and connection housing Cooling/air connection with hose Transport/lifting eyes Solid base frame Existing mounting and supply components Accessories as shown in the pictures   Application areas:   Spare parts sourcing Maintenance of existing vibration testing systems Spare parts and assembly supply Rebuilding and repair projects   Scope of supply:   1 × RMS SW 6005 vibration exciter Existing mounting and supply components Cooling/air hose as shown in the pictures Accessories as shown in the pictures   Condition:   Used Optical condition as shown in the pictures Signs of wear and tear due to age and use Functionality not tested   Sold exclusively as a source of spare parts. The device is explicitly not offered as a functional machine. No guarantee for functionality, operational readiness, or completeness.   Shipping or freight shipping possible. Subject to changes, errors, and prior sale.   We will gladly answer any further questions by telephone.

Year of construction: 2015, condition: excellent (used), Ref: 11161 . 2015 Pack-Smart IPF 30-27-4 Integrated Finishing System Ideal for direct mail, gift card and security packaging, media packaging, tipping, windowing, folding, gluing and other specialist print-finishing applications. Equipped with: Rotary vacuum paper feeder Precision product alignment & registration Dual servo-driven vacuum transport conveyors Twin-head hot melt glue system Servo-driven cold glue pattern system Scoring / perforating module Front fold tooling 3 x plow fold stations Turnover / straight-through module Transfer conveyor Shingled delivery conveyor 10-axis servo control system 10" colour touchscreen HMI Recipe storage & recall Integrated vacuum system Credpfxsz Iz Sfs Aktsi Interlocked safety guarding Specification: Maximum production speed: 12,000 products per hour Maximum conveyor speed: 122 m/min Carrier size: 102–762 mm wide x 102–813 mm long Stock: 145 gsm up to 0.86 mm thickness Secondary rotary pick & place feeder Secondary product size: 54 x 54 mm to 150 x 150 mm Secondary feeder speed: up to 500 products/min Electrical: 230V / 3Ph Air requirement: 4.1–7 bar

Condition: used, VETTER Crane Technology PROFI Crane System / Two-Rail Portal Crane VETTER P300 PROFI Crane System Two-rail portal crane with crane bridge, manual travel unit, and electric chain hoist. For sale is a used VETTER PROFI crane system from the manufacturer Vetter Krantechnik GmbH. The system is suitable for assembly work, production, mechanical engineering, maintenance, logistics, as well as the safe lifting and positioning of heavy loads. Technical data Manufacturer: Vetter Krantechnik GmbH Type: P300 Design: PROFI crane system as a two-rail portal with crane bridge Year of manufacture: 2020 Load capacity: 1,600 kg Span of crane bridge: 5,100 mm Support distance L: 5,590 mm Support distance B: 5,100 mm Beam length: 6,170 mm Overall dimensions of the system: approx. 6,040 x 5,800 mm Bottom edge of crane bridge: 4,145 mm Bottom edge of portal beam: 4,567 mm Overall height: 4,905 mm Classification according to EN 15011: HC2 / S2 Steel structure group: 18/36/30 Operating voltage: 400 V / 50 Hz Control voltage: 24 V Max. permissible hoist weight: 85 kg Electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Year of manufacture: 2020 Load capacity: 1,600 kg Lifting speed: 4.0 / 1.0 m/min Lifting motor power: 1.50 / 0.37 kW FEM class: 2m / M5 Protection class: IP55 Duty cycle: 40 % Weight at 5 m lift: 65 kg Travel unit / trolley Manufacturer: Vetter Krantechnik GmbH Type: SiCO-HF 2000 A Variant A Load capacity: 2,000 kg Beam width: 66 - 220 mm Weight: 17 kg Equipment Two-rail portal crane system Crane bridge Electric chain hoist SIXX8AF Manual travel unit SiCO-HF 2000 A Load hook Floor control Main switch Steel support and beam construction Inspection book available EC declaration of conformity available Documentation available Accessories according to pictures Application areas Mechanical engineering Assembly work Production Maintenance Workshop operation Material handling Cedjz Sn Ddjpfx Akteri Logistics Longest component: approx. 6.2 m Heaviest single component: approx. 300 kg Total weight of the system is approximately between 2,000 and 3,500 kg, depending on the installed steel profiles and foundation plates. Condition Used Optical condition according to pictures System was installed and in operation Inspection book and documentation available Scope of delivery VETTER P300 PROFI crane system Crane bridge Electric chain hoist SIXX8AF 1.6 t Manual travel unit SiCO-HF 2000 A Support and beam construction Floor control / operating elements Main switch Inspection book EC declaration of conformity Documentation Accessories according to pictures The machines, tools and other items visible in the pictures, which are not explicitly described, are not included in the scope of delivery. Shipping or freight shipping possible. Subject to changes, errors and prior sale.

Condition: new, STRUERS Grinding and Polishing System Struers LaboPol-30 with LaboForce-100 and LaboDoser-100 Laboratory grinding and polishing system with extensive accessories For sale is an unused, unassembled grinding and polishing system from the manufacturer Struers. The LaboSystem is suitable for reliable and fast manual or semi-automatic grinding and polishing of samples in the laboratory and in production. Technical data: Manufacturer: Struers Type: LaboPol-30 Article number: Type of equipment: Grinding and polishing machine Power connection: 200–240 V / 50–60 Hz Automatic sample mover: Struers LaboForce-100 Article number: Power supply: 1 × 24 V DC Dosing unit: Struers LaboDoser-100 Article number: Version for square bottles Grinding and polishing disc: MD-Disc with conical mount Diameter: 300 mm Article number: Sample holder plate: Specimen Mover Plate 6 × 40 mm Article number: Equipment: LaboPol-30 grinding and polishing machine LaboForce-100 sample mover LaboDoser-100 dosing unit MD-Disc carrier disc, 300 mm Specimen Mover Plate, 6 × 40 mm Coupling for sample holder plate Glass desiccator, 250 mm, according to parts list Bottle set Service kit LaboPol-30 MD-Concert storage box Areas of application: Material testing Metallography Sample preparation Grinding and polishing Laboratory applications Quality assurance Research and development Industrial material testing Scope of supply: Credpfx Ajz Srm Njktsi 1 × Struers LaboPol-30 – Art. No. 1 × Struers LaboForce-100 – Art. No. 1 × MD-Disc, 300 mm – Art. No. 1 × Specimen Mover Plate, 6 × 40 mm – Art. No. 1 × Coupling for sample holder plate – Art. No. 1 × Struers LaboDoser-100 – Art. No. 1 × Glass desiccator, 250 mm – Art. No. DE-720405 1 × Bottle set – Art. No. 1 × Service kit LaboPol-30 – Art. No. 16332999 1 × MD-Concert storage box – Art. No. Condition: New / unused Equipment has not yet been assembled or put into operation Main equipment in original transport packaging Optical condition and accessories as shown in the pictures The system has not yet been assembled and is in storage. Assembly and commissioning are not part of this offer and must be organized independently by the buyer. The image of the fully assembled system is an EXAMPLE IMAGE. The original photos show the actual delivery condition. The workbench shown and other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: excellent (used), functionality: fully functional, For sale is a well-maintained Holzkraft ASA 2403 mobile dust extraction unit. This unit is ideally suited for extracting wood chips and dust in carpentry shops, joineries, as well as hobby and professional workshops. Thanks to its high air flow rate of approximately 2,850 m³/h, the machine ensures reliable extraction at various woodworking machines. The mobile base allows the extraction unit to be used flexibly within the workshop. The unit is in used but well-maintained condition and is technically functional. Scope of delivery: Crsdpez Smwqjfx Aktji Holzkraft ASA 2403 mobile dust extraction unit Base with rollers Filter bag Chip collection bag Magnetic switch Transportation is possible for an additional charge! The machine will be inspected before sale. For used machines with a manufacturing year of 2009 or earlier, the warranty will be excluded when sold to commercial customers. Technical data and features may vary. Errors, prior sales, and changes reserved. All information is provided without guarantee.

Condition: excellent (used), mileage: 686,003 km, power: 261 kW (354.86 HP), first registration: 04/2021, fuel type: diesel, axle configuration: 6x2, wheelbase: 4,150 mm, fuel: diesel, fuel tank capacity: 430 l, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, total length: 6,510 mm, total width: 2,550 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 7,500 kg, permissible axle load (axle 3): 11,500 kg, Equipment: ABS, Bluetooth, EBS, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, fridge, hill-start assist, power mirror, seat heater, soot filter, spoiler, traction control, = Additional Options and Accessories = - Aluminum fuel tank - Rear work lights - Front work lights - Heated mirrors - Leaf spring suspension - Brake booster - Combination lights - DAB radio - Roof spoiler - Differential lock - Mast for visibility - Remote central locking - High beam headlights - Windshield - Enclosed cab - Speed limiter - Interior lights - Cab - Tilting hydraulics - Refrigerator/cooling drawer - Beacons - Air suspension - Air-suspended seats - Air horn - Motorcycle cover - MX engine brake - Parabolic spring suspension - Particulate filter - Radio/CD player - Radio/cassette player - Rotating beacon - Disc brakes - Sleeper cab - Hose connections - Seat heating - Sun visor - Stationary air conditioning - Blind spot camera - Automatic heating system - Tool box - Windscreen - Central lubrication system - Equipment transfer = Additional Information = General Information Number of doors: 2 Year of manufacture: 2021 Registration number: 91-BRH-7 Technical Information Number of cylinders: 6 Engine displacement: 12,902 cc Transmission Transmission: 12T2210, automatic Axle Configuration Maximum front axle load: 8000 kg Rear axle 1: Lift axle; Max. axle load: 7500 kg Rear axle 2: Max. axle load: 11500 kg Weights Unladen weight: 8,749 kg Payload: 18,251 kg GVW: 27,000 kg Cjdpfx Aoz S Nbdoktsri Interior Number of seats: 2 Maintenance, History and Condition APK (Technical Inspection): valid until 04.2027 Damage: none

Condition: good (used), mileage: 229,090 km, power: 55 kW (74.78 HP), first registration: 03/2015, fuel type: diesel, tire size: 195/65R15, axle configuration: 4x2, wheelbase: 2,730 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 5, emission class: euro5, number of seats: 2, total length: 4,380 mm, total width: 1,810 mm, total height: 1,800 mm, loading space length: 1,760 mm, loading space width: 1,500 mm, loading space height: 1,210 mm, Equipment: ABS, air conditioning, central locking, electric window regulation, power mirror, traction control, = Additional Options and Accessories = - Halogen lamp - None - Manual - Radio/cassette - Fabric - Partition = Notes = Configuration: 4x2, Payload: 666 kg, Tare weight: 1269 kg, Gross vehicle weight: 1935 kg, Unbraked towing capacity: 680 kg, Braked towing capacity, center axle: 995 kg, Cab type: Single cab, Air conditioning, Number of airbags: 1, Parking assistance: None, Electric windows, Electric mirrors, Partition, Radio/cassette, Color: White, Lighting type: Halogen lamp, Engine power: 55 kW (74 hp), Number of cylinders: 4, Engine displacement: 1560 cc, Fuel: Diesel, Euro: 5, Drive technology: Timing belt, Transmission type: Manual, Gears: 5, Power steering, ABS, ASR, Starter battery, Body type: Standard, Side panels, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 2, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, air conditioning, side door, spare wheel, Tire type: All-season tires = Additional Information = General information Number of doors: 1 License plate: VN-057-K Axle configuration Tire size: 195/65R15 Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire tread depth left: 5 mm; Tire tread depth right: 5 mm Axle 2: Tire tread depth left: 4 mm; Tire tread depth right: 4 mm Weights Unladen weight: 1,269 kg Payload: 666 kg GVW: 1,935 kg Functional Loading area height: 58 cm Maintenance APK (Technical Inspection): valid until 03/2027 Condition Crsdpfx Aoz S Ag Tsktji Technical condition: good Optical condition: good Damage: none Number of keys: 1

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, paper weight (min.): 65 g/m², paper weight (max.): 300 g/m², product length (max.): 320 mm, product width (max.): 620 mm, TECHNICAL DETAILS Minimum paper size: 120 × 210 mm Maximum paper size: 320 × 620 mm Paper weight: 65–300 g/m² Booklet heads: 2 ISP booklet heads Maximum book thickness: 10 mm Maximum page count: approx. 200 pages at 80 g/m² Staples per spool: approx. 50,000 EQUIPMENT Plockmatic Morgana BM 5050s Booklet Maker VFX high-performance feeder with vacuum feeder CST 5000 creasing and 2-sided trimming module for head and foot trimming FM 5000 finishing module for front trimming BEST 4000-1 extended conveyor stacker Anti-static kit for VFX feeder Anti-static kit for CST 5000 Crodpfx As Ahnqgoktsi

Condition: excellent (used), Year of construction: 2008, DEMAG SYSTEM 800/1120-9500 injection molding machine + DEMAG ERGOTECH DR743 robot Year of manufacture: 2008 | Clamping force: 800 tons | Demag Ergotech DR743 linear robot Hydraulic Demag System 800/1120-9500 injection molding machine from 2008, equipped with an integrated Demag Ergotech DR743 linear robot for automatic part removal. TECHNICAL SPECIFICATIONS 1. BASIC DATA Manufacturer: Demag Model: System 800/1120-9500 Year of manufacture: 2008 Machine type: hydraulic injection molding machine for processing thermoplastic materials Clamping force: 8000 kN (800 tons) Injection unit: 9500 Credo Af Nhfjpfx Aktei Equipment: integrated Demag Ergotech DR743 linear robot 2. CLAMPING UNIT Clamping force: 8000 kN (800 tons) Dimensions of mounting plates: 1620 × 1500 mm Column spacing: 1120 × 1000 mm Minimum mold height: 500 mm Maximum mold height: 1050 mm Maximum distance between plates: 2080 mm Mold opening stroke: 1030 mm Ejector stroke: 350 mm Ejector force: 139 kN Maximum mold weight: 7200 kg 3. INJECTION UNIT Injection unit type: 9500 Screw diameter: 130 mm Injection volume: 7300 cm³ Injection weight (PS): 6640 g Injection pressure: 1300 bar Screw length-to-diameter ratio (L/D): 20:1 4. DEMAG ERGOTECH DR743 LINEAR ROBOT Identification data Manufacturer: Demag Ergotech Model: DR743 Type: DR743-42141000 Year of manufacture: 2008 Serial number: W743-0277 Robot type: linear, designed for automatic part removal Integration with injection molding machine: yes Robot travel ranges X-axis: 1200 mm Y-axis: 2600 mm Z-axis: 3000 mm Electrical and mechanical parameters Supply voltage: 400 V Rated current: 18 A Connected power: 12.5 kVA Robot weight: 750 kg 5. HYDRAULIC AND ELECTRICAL SYSTEM Pump motor power: 110 kW Heater power: 79 kW Hydraulic oil tank capacity: 1300 l 6. MACHINE DIMENSIONS AND WEIGHT Length: 12,300 mm Width: 2700 mm Height: 2700 mm Main unit weight: 33,500 kg Accessory weight: 9700 kg Total weight of main unit and accessories: 43,200 kg

Condition: used, Year of construction: 2015, Moretto OTX 360VP_drying hopper system (2015) Professional industrial drying hopper Moretto OTX 360VP designed for efficient Cedpfx As Af Na Hskteri pre-heating and drying of plastic granulates. Equipped with an integrated air heater and suction valve, this compact unit ensures optimal moisture removal and consistent material flow prior to injection moulding or extrusion processes. Technical Specifications: 1. Manufacturer: Moretto S.p.A. (Italy) 2. Hopper Model: OTX 360VP 3. Serial Number: OP. Year of Manufacture: 2015 5. Hopper Capacity: 360 litres () 6. Dry Weight (Hopper): 133 kg Integrated Components: 1. Air Heater Unit: 2. Model: Moretto HG3V90X 3. Serial Number: 1515357 4. Heating Power: 3.1 kW 5. Voltage / Frequency: 230 V / 50–60 Hz 6. Heater Weight: 20 kg 7. Suction Valve: 8. Model: Moretto AVIC50 9. Serial Number: OP. Valve Weight: 3.12 kg

Condition: used, Year of construction: 2015, Moretto OTX 360VP_Moretto drying hopper system (2015) Professional industrial drying hopper Moretto OTX 360VP designed for efficient pre-heating and drying of plastic granulates. Equipped with an integrated air heater and suction valve, this compact unit ensures optimal moisture removal and consistent material flow prior to injection moulding or extrusion processes. Technical Specifications: 1. Manufacturer: Moretto S.p.A. (Italy) 2. Hopper Model: OTX 360VP 3. Serial Number: OP. Year of Manufacture: 2015 5. Hopper Capacity: 360 litres () 6. Dry Weight (Hopper): 133 kg Crodpfo Af Nd Aox Aktoi Integrated Components: 1. Air Heater Unit: 2. Model: Moretto HG3V90X 3. Serial Number: 1515357 4. Heating Power: 3.1 kW 5. Voltage / Frequency: 230 V / 50–60 Hz 6. Heater Weight: 20 kg 7. Suction Valve: 8. Model: Moretto AVIC50 9. Serial Number: OP. Valve Weight: 3.12 kg

Condition: used, Year of construction: 2023, Manufacturer: TEKA, Type: ZPF 9H, Year of manufacture: 2023, Serial no. A22341310061001, 22 kW, Exhaust/piping system, Dust collection container, Welding fume class W3 Crjdpfjz Tn Edjx Aktei +++ Subject to prior sale! +++ +++ Attention: This unit is part of an online auction! +++

Condition: good (used), Paper band filter with abundant nonwoven fabric SEITZ, type PFA 200 Crods Afpyxjpfx Aktoi

Year of construction: 2012, condition: excellent (used), Dust extraction system with Venturi wet separator • Manufacturer: Keller Lufttechnik • Type: VDN-E-3.6-Z5.5 • Year of manufacture: 2012 • Serial number: 1029002 1 1 • Includes accessories: Disposal bucket • Condition: Unknown Crodpfx Ake Afbp Estoi Operating flow rate: 3,600 mm Drive power: 5.5 kW Water capacity: 440 l Diameter: 894 Height: 2,725 mm

Year of construction: 2022, condition: excellent (used), functionality: fully functional, We offer a complete, ready-to-use mineralizer in perfect condition. Mineralizer model: Titan MPS External Exhaust. Please feel free to contact us and arrange a visit to see the equipment on-site. Cedpo Afubhofx Aktjri