Used Wemas for sale (18)

Condition: good (used), Year of construction: 2011, functionality: fully functional, controller manufacturer: Heidenhain, overall weight: 8,400 kg, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Wemas VZG 65A Year of manufacture: 2011 Heidenhain iTNC 530 control system 30-position tool changer, SK40 Coolant system with strip-type filter Chip conveyor Dksdsz Hx N Sspfx Ap Isu

Condition: used, Year of construction: 2007, functionality: fully functional, • WEMAS TURN 400-52 • Year of manufacture: 2007 • Control system: FANUC 0i-TC • Programming system: Manual Guide • Max. turning diameter: Ø 484 mm • Max. turning length: 750 mm • Spindle bore: Ø 70 mm • Rapid traverse: 24 m/min • Tool turret: VDI 30 • Hydraulic chuck Dksdpfoz Ip Nfsx Ap Ieu • Hydraulic quick-change turret Chip conveyor

Condition: ready for operation (used), Year of construction: 2013, operating hours: 7,358 h, functionality: fully functional, machine/vehicle number: 6LUD00036, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, feed length X-axis: 620 mm, feed length Y-axis: 620 mm, feed length Z-axis: 460 mm, feed rate X-axis: 36,000 m/min, feed rate Y-axis: 36,000 m/min, feed rate Z-axis: 36,000 m/min, torque: 108 Nm, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece length (max.): 500 mm, workpiece width (max.): 400 mm, workpiece height (max.): 350 mm, workpiece diameter (max.): 680 mm, workpiece weight (max.): 300 kg, total height: 3,400 mm, total length: 4,600 mm, total width: 2,700 mm, table width: 600 mm, table height: 755 mm, table length: 600 mm, table load: 300 kg, rotary table diameter: 600 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 12,000 rpm, overall weight: 8,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 5,303 h, coolant supply: 18 bar, distance table center to spindle nose: 50 mm, spindle motor power: 17,000 W, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 100, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Commissioned 4/2014 Table rotation, C-axis: 360° Table swivel, B-axis: -50° to +110° Distance from spindle nose to table: 150 mm Table clamping surface: Ø 650 Table load capacity, max.: 300 kg Table slots: 5 x 18H7 x 100 mm Centering bore: Ø 50 H7 x 30 mm Workpiece size, max.: Ø 520 x 330 mm Machine accuracy: VDI I DGQ 3441* Positioning accuracy: +/- 0.006 mm* Axis resolution: 0.001 mm* *determined at a constant ambient temperature of 20°C +/- 1°C Main spindle: Main drive, AC motor, direct drive Drive power (100% / 25% ED): 10.0 / 17.0 kW Speed range, stepless: 20 - 12000 rpm Spindle taper: SK 40 DIN 69871 Torque at (100% / ED): 63.7 / 108.6 Nm Axis drives: Axes X, Y, Z: AC motors Axes B, C: AC motors Travel speeds: Rapid traverse in axes X, Y, Z: 36 m/min Speed, max. B-axis: 25 rpm Speed, max. C-axis: 25 rpm Acceleration X, Y, Z: 6.5 m/s² Coolant system: External tool cooling via external nozzles Coolant tank: 280 l Operating pressure, external: 0.9 bar Coolant system, internal tool cooling DIN 69871 Form A Operating pressure, internal coolant supply: 18.0 bar Manual rinsing of the work area via an additional gun Standard accessories: - CNC control: Heidenhain iTNC 530, full simultaneous 5-axis version - Handwheel 410 (Heidenhain) - Digital axis drives - Digital spindle drive - Swarf conveyor with discharge height 800 mm • Spindle cooling – radiators – plate cooling for spindle motor - Full protective enclosure with cabin roof Tool magazine VZG 65 5A by Indunorm: Number of tools: 100, with a tool length of up to 320 mm / can be converted to 125 tools, then a tool length of only 200 mm is possible. Tool diameter, max.: 80 mm Tool diameter, max.: 130 mm (with free adjacent positions) Tool change with double gripper - Linear path measuring system in axes X / Y / Z (glass scale) - Direct encoder in axes B / C - Temperature compensation - IR measuring probe – 3D Software - Option - iTNC 530 Kinematic-Opt • Calibration software Internal tool cooling 18 bar • Coolant tank • Internal tool cooling: 280 L DIN 69871 Form A • Double-circuit filter • Switchable filter cartridges • Filtration rate: 10 µm Band filter system PRODUCTION - LINE - RT 100 Automatic pallet changing system Loading and unloading via a linear axis system: Djdpez Diq Uofx Ap Isku Handling data: Handling weight, max.: 100 kg (35 kg) Pallet capacity: 6 pallet positions up to 400 x 400 mm: Control: PLC control with integrated control cabinet incl. switching and control components incl. software for the automatic sequence Zero point clamping system 320 x 320 x 60 mm - Clamping via 4 clamping bolts - Axis distance: 180 mm - Clamping force: 4 x 12500 N - Repeatability: 0.005 mm - Axial load, max.: 4000 kg • Zero point clamping plate 320 x 320 - Automatic door Interface for automation and clamping systems Universal interface for automatic pallet changing systems, force clamping devices and zero point clamping systems • for pneumatic clamping systems • 2-channel rotary feedthrough integrated in the table • Pneumatic lines led to the outside • Pneumatic maintenance unit • Control via M commands logical inputs and outputs prepared incl. 7 pallets 320x320 with 6 vices and one 3-jaw chuck !!without tool holders and without tools!! Machine ex works, without delivery and assembly, all information without guarantee, price plus statutory value-added tax.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 037611, Equipment: chip conveyor, documentation/manual, Offering a used Wemas Turn 400 in very good condition. Djdpfx Ajzav H Ejp Isku

Year of construction: 2008, condition: used, Distance between centers: 1500mm, swing over bed/cross slide: 620mm/400mm, control: Heidenhain ManualPlus 420. The machine has been in daily single-shift operation since 2008. An on-site inspection is possible. Dkodpfxozww Tge Ap Iju

Condition: good (used), Year of construction: 2003, Vertical machining center Machine type: Wemas VZ 750 Control: Heidenhain iTNC 530 Year: 2003 SPECIFICATIONS Travel X-Axis: 750 mm Y-Axis: 500 mm Z-Axis: 500 mm Rapid motion: (X/Y/Z): 25 m/min. Max. revolution: 8.000 rpm Spindle power: 7,5 kW Dkedpfxoz Dkryo Ap Iju Tool: SK 40 Tool capacity: 20 Table size: 1.000 x 500 mm Max. Table Load: 400 kg Equipment Chip conveyor Internal cooling: bar Caliper: Nein

Condition: excellent (used), Year of construction: 2019, Control system: Heidenhain TNC 620 Dkodpfx Apozatnao Ieu Travel range X/Y/Z: 700/500/500 mm Spindle speed: 12,000 rpm Coolant pressure: 30 bar Chip filtration system Measuring probe Tool magazine for 30 tools, SK 40 Chip conveyor

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 650 mm, controller model: HEIDENHAIN 530, table width: 710 mm, table length: 1,400 mm, overall weight: 12,000 kg, WEMAS VZ 1200 Due to company restructuring, we have for sale: HIGH-SPEED 3-AXIS MACHINING CENTER Manufacturer: WEMAS Model: VZ 1200 Dkedpfx Aox Emm Uop Iju Control: HEIDENHAIN 530 Year of manufacture: 2008 Table size: 1400x710 mm Travel: X 1200, Y 750, Z 650 mm Max. workpiece weight: 1800 kg Spindle: HSK 63A 16,000 rpm Power S1/S2: 15kW/19kW Tool changer: 30 positions Workpiece probe: HEIDENHAIN Tool probe: HEIDENHAIN Chip conveyor Internal coolant supply (IKZ) The machine is in very good condition, serviced, and in continuous use.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 15,662 h, functionality: fully functional, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, controller model: Heidenhain TNC530i, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 620 mm Travel range, Y-axis: 520 mm Travel range, Z-axis: 460 mm Dkodezr Nmbjpfx Ap Ieu C-axis: 360° B-axis: -50° / +110° Rotary table diameter: 500 mm Spindle speed (max.): 12,000 rpm Spindle type: SK40 Number of spindles: 1 Number of tool positions in the tool magazine: 30 MACHINE DETAILS Control system: Heidenhain TNC530i Operating hours (see image) Control system operating hours: 38,569 h Machine operating hours: 37,263 h Spindle operating hours: 15,662 h EQUIPMENT Documentation/Manual Speed infinitely adjustable Chip conveyor Scraper-type chip conveyor Workpiece measuring probe Coolant system Compressed air via M-command Heidenhain handwheel Kinematic optimization cycle Note: The machine is sold without tools, vise, and clamping plate.

Condition: used, Year of construction: 1998, Technical details: turning diameter over bed: 500 mm turning dia. over face-slide: 340 mm turning length: - mm centre distance: 1500 mm swing diameter: 500 mm Djdjzu Ndlepfx Ap Isku centre height: 250 mm control: Heidehain Plus spindle bore: 80 mm range of revolution per miute: 20 - 2400 U/min total power requirement: 11 kW weight of the machine ca.: 0,25 t dimension machine approx.LxWxH: 3,2 x 1,7 x 1,8 m

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, controller manufacturer: Siemens, total height: 3,000 mm, total length: 3,700 mm, total width: 2,310 mm, table height: 550 mm, table length: 1,000 mm, table load: 600 kg, overall weight: 5,400 kg, spindle speed (max.): 10,000 rpm, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Wemas New Machine VZ800 Greenline X-axis travel: 800mm Y-axis travel: 550mm Z-axis travel: 550mm Table surface area: 1000mm x 550mm Table load capacity: 600kg SK40 tool holder 30-tool magazine 42m/min rapid traverse rate Siemens 828D Shop Mill Roller linear guide in all axes 6-way guide system in the Z-axis Dkedpfx Aoztzpwep Iou M30 power off Spindle blow-out system Control cabinet cooling Wemas Airshield spindle All information without guarantee Sale only to commercial businesses

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 860 mm, controller manufacturer: HEIDENHAIN, controller model: TNC530 i, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis WEMAS VZ 860 was manufactured in 2014. It features an internal coolant supply and is equipped with a Heidenhain TNC 530 i control system, ensuring efficient operation. If you are looking to get high-quality machining capabilities, consider the WEMAS VZ 860 vertical machining centre we have for sale. Contact us for further details. • With internal coolant supply • Condition: Very good / Fully operational Dedjzbu Iwepfx Ap Ijku • Control System: Heidenhain TNC 530 i Technical Specification Through-spindle Coolant Yes

Condition: used, Universal Tool Milling Machine WEMAS - MAKOSON Type WM 2 Year of manufacture: 1992 Travel ranges X: 480 mm, Y: 350 mm, Z: 250 mm Table size: 800 x 400 mm Spindle taper: ISO 40 Quill vertical travel: 80 mm Spindle speed: 35 to 4000 rpm, 3 steps Feed X, Y, and Z: 1 to 850 mm/min, stepless Dkjdpfx Asx Hkd Tep Iou Rapid traverse X, Y, and Z: 1 m/min Spindle drive: approx. 3 kW ?? Electrical connection: 400 Volt, 50 Hz - Swiveling control panel with HEIDENHAIN digital readout, type Positip 850 - Spindle speed via 3 gearbox stages and stepless adjustment via frequency converter - Conventional handwheels for X, Y, Z - Vertical milling head with drilling quill swiveling +/- 90° - Manual tool clamping with M16 thread - Manual central lubrication - Coolant system integrated in machine base - Control cabinet fixed to the machine - Fixed angle table Space requirement L x W x H: 1900 x 1700 x 1820 mm Weight: approx. 2000 kg In good condition

Condition: excellent (used), For sale: robust WEMAS column milling machine, model FM23. Heavy cast iron construction, very rigid—ideal for toolrooms and maintenance workshops. The machine is equipped with a 3-axis DRO D60-3V digital readout and Rascher Nürnberg–München measuring scales. Table with longitudinal T-slots, coolant system with separate reservoir and pump. Vertical spindle with a precision holder and feed adjustment. Power supply: 3×400 V. The machine is complete, recently serviced, runs smoothly, and is ready for power-on testing. Normal signs of use visible—no excessive play. Included in the price: 3-axis DRO display, scales on X/Y/Z axes, coolant tank and pump, cables, power feed roller, and work light. Dedpfx Aow I Hzpsp Isku Additional information from photos: 'WEMAS' and 'FM23' nameplates, spindle adjustment calibration plate, DRO panel with mm/inch, ABS/INC, and calculator functions. Working parameters, spindle taper, and speed ranges to be confirmed onsite—I can measure the table and X/Y/Z travels upon request. Loading by forklift possible. Assistance with transport organization available.

Condition: ready for operation (used), operating hours: 8,722 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, table load: 400 kg, spindle speed (max.): 8,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel (X-axis): 750 mm Travel (Y-axis): 500 mm Travel (Z-axis): 500 mm Table dimensions: 1,000 × 500 mm Number of T-slots: 3 Maximum table load: 400 kg Drilling performance Maximum drilling diameter (steel with tensile strength 600 MPa): 25 mm Drilling diameter with removable inserts from SK: 30 mm Thread cutting diameter: M20 Spindle Taper spindle bore: 40 (7:24) Tool shank: DIN 69871 Spindle diameter for bearings: 70 mm Distance spindle – table surface: 150–650 mm Dodpfx Asygl Tujp Ioku Spindle speed: 20–8,000 rpm Positioning accuracy Static deviation of the plane: 0.02 mm Repeatability: 0.008 mm Rapid traverse: 25,000 mm/min Feed rate: 5,000 mm/min MACHINE DETAILS CNC control manufacturer: Heidenhain Coolant system Nominal flow rate hydraulic generator for tool cooling: 32 l/min Nominal flow rate hydraulic generator for internal cooling: 60 l/min Maximum tank volume: 280 l Pneumatics Operating pressure: 0.6 MPa Operating hours Control powered hours: 30,743 h Machine powered hours: 25,946 h Program runtime: 8,722 h EQUIPMENT NC machine vice Various toolholders Drill chuck Face milling heads 4-fold clamping fixture suitable for vice 3D probe

Condition: ready for operation (used), Year of construction: 2001, operating hours: 13,677 h, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, total width: 2,650 mm, overall weight: 4,000 kg, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 20, product length (max.): 3,200 mm, number of axes: 4, This 3-axis WEMAS VZ 750 CENTURY was manufactured in 2001. It features an X-axis travel of 750 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine includes a Heidenhain TNC 426 control unit, an electronic handwheel, and a tool changer. If you are looking to get high-quality machining capabilities, consider the WEMAS VZ 750 CENTURY vertical machining centre we have for sale. Contact us for further details. • Machine ON time: 41,712 hours • Measuring system: Linear position measuring system in all three axes • Handwheel: Heidenhain HR 410 electronic handwheel • Tool changer: Included • Machine access: Side doors with windows (left and right) Additional equipment • Tool probe: m&h Inprocess 3D tool sensor (Type m&h TS35.10) Dkjdpjy Ifp Hofx Ap Iou • Workpiece probe: m&h Infrared workpiece touch probe (Type 25.00 SK40-02) • 4th axis: Walter CDS 22 motorized rotary table/indexing head with original control unit • Rotary table features: 3-jaw chuck, RS232 interface, digital angle input Technical Specification Taper Size SK 40 Through-spindle Coolant No

Condition: used, x-travel 600 mm y-travel 400 mm z-travel 320 mm Dedpfx Asxwzcxep Ioku table-size 900 x 420 mm control konventionell tool adaptor SK40 turning speed range 35,5 - 1800 U/min quill stroke ja mm total power requirement 5,0 kW weight of the machine ca. 1,45 t dimensions 1,6 x 1,2 x 1,9 m Features: - Digital display - Coolant system - Milling head with quill

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 161, center width: 1,500 mm, center height: 250 mm, spindle speed (max.): 2,400 rpm, controller model: Heidenhain Manual-Plus, No minimum price – guaranteed sale to the highest bidder! Dkodpfxozk Dwrj Ap Iou TECHNICAL DETAILS Maximum turning height: 250 mm Turning diameter over bed: 500 mm Turning diameter over slide: 340 mm Distance between centers: 1,500 mm Bed width: 315 mm Spindle bore: 80 mm Spindle speed: 20 - 2,400 rpm MACHINE DETAILS Control system: Heidenhain Manual-Plus Programming: Teach-in Power: 11.0 kW Dimensions & Weight Dimensions (L x W x H): 3,150 x 1,650 x 1,800 mm Net weight: 2,500 kg EQUIPMENT Quick-change tool holder 3-jaw chuck CE marking