Used Window Aluminium for sale (12,616)

Year of construction: 2014, condition: used, PROLOGIC window construction software FenOffice 14 Conturex Ndedpfx Aorci S Ssgzjf

Condition: new, Year of construction: 2025, Production time appr. 4 months Our best-selling briquetting press series + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several hundred machines in use with satisfied customers + Good price performance ratio Throughput approx. Up to 200 kg per hour * strongly dependent on the material. - in the last test with aluminum granules smaller than 5 mm - approx. 186 kg per hour + the pressed emulsion. - in the last test with aluminum chips smaller than 18 mm - approx. 120 kg per hour + the pressed emulsion. Technical specifications: Motor: 7.5 KW + 0,55 kW Cooler Ndedpschqxxjfx Agzsf 400 volts / 50 Hz / 3-phase, Front bush: 125 mm, Briquette stroke max .: 100 mm, Briquette stroke opt .: 80 mm, Pump: 80 liters, Storage container approx. 0.5 qbm content (expandable), Diameter: 1200 mm, with agitator discharge, Hydraulic unit complete with oil tank 220 liters Dimensions approx. 2095 x 1600 x 1310 mm lxwxh, Weight 1370 kg, Automatic on-off switching via level indicator CE compliant. . Requirements for the raw material: - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of magnetic metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm # 2809 Weinig Unicontrol 6 ----- Technical Specifications Summary (Please inquire about any additional accessories included) Item 1: Crosscut Saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment light for detecting the saw cut CNC-controlled length stop ----- > Length 3,500 mm > Electronic length stop including positioned crosscut saw Item 2: Tenon and slotting spindle ----- > Number of tools: 3 (stroke 2 x 100) mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Vertical pneumatic spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 3000 rpm > Max. tool travel circle: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 360 mm > Motor power: 11 kW Item 3: 1st profiling spindle (straight and counter-rotating) ----- > Position: vertical right > Number of tools: 1 > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool travel circle: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- > Position: vertical right Ndedpfxsxtvgks Agzjf > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Vertical pneumatic spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Maximum tool travel: 232 mm > Motor power: 11 kW 2 axially indexed feed rollers opposite the profiling spindle, for the production of narrow, short parts (e.g., glass-parted muntins) Muntin guide consisting of: Muntin support bar from above in the area of ??the profile milling unit vertically on the right and the profiling spindle. Item 5: Profile milling unit, horizontal, top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Tool travel radius max. 130 mm > Axial adjustment range: 30 mm, 2 positions > Radial adjustment range: 125 mm, 4 positions, manual Item 6: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range: 115 mm, 8 positions via pneumatic turret > Radial adjustment range: 110 mm, 8 positions via pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Tool travel radius Max.: 210 mm > Motor power: 3.0 kW Other features ----- > Electric feed height adjustment including mechanical digital display and manual feed bar clamp > Rebating device for tear-free rebating > Double parts package > Return conveyor for one-person operation: swivel belt > Screen control > Sloped window device > Electronic angle display for sloped windows > Industrial PC, with Windows PC control/NEXUS Extraction nozzle diameter: ----- Crosscut saw 80 mm Slotting spindle 140 mm Profile spindle 1 140 mm Profile spindle 2 140 mm Top grooving device 80 mm Fitting spindle 120 mm ----- Pr...

Condition: good (used), functionality: fully functional, machine/vehicle number: 1050126453, Year of construction: 2006, The saw works flawlessly. Ndsdexq Tacspfx Agzof

Condition: excellent (used), Year of construction: 2013, Maximum saw blade : 400 mm Digital angle display in degrees ( +/- 46 degree ) 2 x pneumatic clamps Hydraulic blade feed Engine size : 1,8 Kw Digital display with touch screen Njdpfjxx Hwwjx Agzodf Hand held barcode scanner 4000 mm infeed with digital pusher 4000 mm manual outfeed with rollers

Year of construction: 2012, condition: excellent (used), Ruchser roller conveyor for windows with 90° turning device left/right length 4400mm Electrically driven accumulating rollers with 2 parallel system components pneumatically tiltable from vertical 7° outside to vertical 7° inside. Plant parts 1900 mm high with rubber roller strips. Between the rubber strips stainless steel plates 2 mm deeper for sliding surface clip holders. Inlet and outlet with edge protection rollers up to 3000mm high as rubber rollers. Infeed track 2000 mm, outfeed track 4000mm driven accumulation rollers. Nedelpcc Iepfx Agzodf Control and operating element mounted on freely adjustable stand.

Year of construction: 1997, condition: excellent (used), Window making machines WEINIG automatic tapping and slotting machine UNITEC 10, year 1997 Nodeiix Uvopfx Agzjdf profiling and milling machine UNIVAR 10, year 1997

Year of construction: 2024, condition: new, - Semi-automatic - Saw blade 420 mm - Double mitre - 4 Pneumatic clamps - Spray lubrication system - Roller conveyor 300 cm with length stop - Blow gun - Protective cap Ndsdpfx Agegg N A Rszef - Technical documentation - 400V

Condition: used, Year of construction: 1998, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm 1 GUBISCH – CENTROMAT CW 2 will be sold on behalf of our customer, ex location ----- Manufacturer description: ----- For window and door production, with 50 mm spindle diameter in longitudinal profiling. With the following processing stations and options: - Slotting machine on one side for straight and angled connections Milling machine for longitudinal profiling - Rebating operation with synchronous milling unit and automatic plunge. Pivoting frame support up to 650 mm - Central control 1.0 cross-cut saw automatically plunges from above ----- Motor power, including motor brake: 3.0 kW Spindle speed: 2,800 rpm. Cutting circle diameter: 350 mm diameter Spindle diameter: 30 mm diameter Clamping flange, 1 driver 6 mm diameter TK 42, 120 mm diameter Pneumatic vertical stroke: 100 mm Pneumatic horizontal stroke: 160 mm against 2 manually adjustable 6-way turret stops Chip extraction hood with extraction nozzle 100 mm diameter 2.0 slot unit ----- Motor power, including motor brake: 9.2 kW Spindle speed: 3,800 rpm Flight circle diameter: 320 mm diameter Spindle diameter: 50 mm diameter Usable spindle length: 320 mm Pneumatic vertical stroke fixed: 2 x 100 mm Suitable for 3 tool sets of 100 mm each Zero height: 10 mm Chip extraction hood with extraction nozzle: 160 mm diameter 3.0 Slotting table ----- Table height above floor 920 mm Feed for 4 speeds freely adjustable: - 1. Milling, slanting window and typing speed can be set in the table (approx. 7 m/min.) - 2. Sawing speed approx. 7 m/min. (can be set on the device) - 3. Transfer speed approx. 10 m/min. (can be set on the device) - 4. Return speed/without processing approx. 25 m/min. (can be set on the device) - Motor power, including motor brake 0.37 kW Workpiece clamping pneumatic Pendulum pressure shoes Workpiece clamping pneumatic 1 clamping cylinder with 2 additional pressure shoes 3.1 Counter wood device Counter wood changer with 2-way automatic change and then with manual. Rotation of 180 degrees, 2 further counters possible, which then also counter in automatic mode 3.2 Length stop ----- - Stop system with 3 scales for - a) outside frame - b) outside sash upright - c) outside sash crosswise Adjustment manually - Length with attachable extension 3000 mm - for sloped windows, pivotable +/- 60 degrees 3.3 Angle transfer - automatic via vertically clocked feed roller in the milling feed 4.0 Milling machine For longitudinal profiling and rebating of windows/doors with the following units: ----- 4.1 First profile milling unit ----- Nodpfx Agew I Eawszsdf - Counter-rotation - Synchronous rotation with automatic plunge can be used for rebating - Motor power including motor brake: 9.2 kW - Spindle speed: 6000 rpm. - Cutting circle diameter: 240 mm max. - Spindles adjustable for zero diameter 140 mm max. - of tools 112 mm min. - Zero height: 10 mm - Spindle diameter: 50 mm diameter - Spindle usable length: 320 mm - Vertical stroke pneumatically fixed, - suitable for 4 tool sets of 80 mm each, 3 x 80 mm - Horizontal stroke pneumatic: 80 mm - Chip e...

Condition: like new (used), Year of construction: 2022, functionality: fully functional, complete plat concisting of: Bi-rail overhanging conveyor with two points bar support , lift and rotation unit Spray booth for robot with full recirculation, with autimatic pre-filter replacment system High pressure humidificer for spray booth and flash off room Robotic spray system for windows with jacket nozzle cleaning unit automatic color change (3 independent ) electrostatic safty system paint flow meter drying tunnel with ldp system and axial fans supervisor systeem with data interface and datamic reader Njdpexw Ux Hsfx Agzodf “The line is packed for transport. It has been previously installed, but it has never been taken into operation.”

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Ndodst R T Hcspfx Agzjf Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Year of construction: 1983, condition: good (used), Window handle drill Njdpoirt Ehjfx Agzsdf

Condition: used, Year of construction: 2008, functionality: fully functional, 90° welding and possibility of welding angles from 40° through 180° Limitation of standard welding seal thickness (2mm.) (1 mm upon request). Reduction of welded profile length 3 mm. For each welded profile side. Automatic temperature control of the fusion plate. Automatic control of fusion times. Automatic control of welding times. Ndsdjxytpcopfx Agzef Adjustment of fusion pressure. Integral protection of working area, fusion plate and locking cylinders. Working cycle and other functions controlled by an electronic card (DCS) Profile supports for quick change-over of counter forms. Device for quick change-over of profile positioning blade. Time-controlled working cycle . Working cycle with possibility to repeat the profile locking, in case of wrong positioning Profile supporting arms.

Condition: new, - Saw blade 400 mm - Double miter - 4 pneumatic clamps Ndsdpfxjgg N Axo Agzef - Mist lubrication system - Roller conveyor 300 cm with length stop - Blow gun - Protective cover - documentation - 400V

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: M275603, travel distance X-axis: 6,200 mm, Emmegi, Twin Electra Sun TU/6 CNC twin head mitre saw. Cutting lenght: 6200mm Nodpfxexrg R Rj Agzjdf Blade 500mm

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, length stop: 4,500 mm, tool diameter: 400 mm, spindle speed (max.): 6,000 rpm, controller model: Weinig Unicontrol 12, TECHNICAL DETAILS Cross-cut saw (electronic, horizontally adjustable, infinitely variable) Number of tools: 1 pc. Motor power: 3.7 kW Spindle speed: 3,000–6,000 rpm Spindle diameter: 40 mm Tool diameter: max. 400 mm Axial adjustment: 150 mm NC axis, electronically infinitely variable Radial adjustment: pneumatic, 8 positions (e.g. edge rounding from above) Rounding unit Position: horizontal bottom Axial adjustment: together with cross-cut saw Electronic length stop Length: 4,500 mm 1st & 2nd tenoning and slotting spindle Spindle diameter: 50 mm Spindle speed: 2,800–4,000 rpm Motor power: 15 kW Tool diameter: 380–400 mm Tool clamping length: 640 mm, with counter-bearing Axial adjustment: 580 mm NC axis, infinitely variable Tailstock counter (entire clamping length is counter-supported) 1st & 2nd profiling spindle Position: vertical right Spindle diameter: 50 mm Spindle speed: 6,000 rpm Motor power: 11 kW Tool clamping length: 400 mm, with counter-bearing Tool swing diameter: min. 140 mm Tool swing diameter: max. 232 mm Axial adjustment: 350 mm NC axis, infinitely variable Radial adjustment: 80 mm NC axis, infinitely variable Nedpfxexp U N Ns Agzodf Profile milling unit (grooving unit from above) Spindle diameter: 40 mm Motor power: 3.0 kW Tool clamping length: 40 mm Axial adjustment: 30 mm NC axis, infinitely variable Radial adjustment: 125 mm NC axis, infinitely variable Spindle speed: 9,000 rpm Tool swing diameter max.: 130 mm 4th profiling spindle Position: vertical right Number of tools: variable Motor power: 11 kW Spindle diameter: 50 mm Tool clamping length: 400 mm, with counter-bearing Axial adjustment: 350 mm NC axis, infinitely variable Radial adjustment: 80 mm NC axis, infinitely variable Spindle speed: 6,000 rpm Tool swing diameter min.: 140 mm Tool swing diameter max.: 232 mm 5th profile milling unit (hardware spindle) Position: vertical right Motor power: 3.0 kW Spindle diameter: 40 mm Tool clamping length: 160 mm Axial adjustment: 115 mm NC axis, infinitely variable Radial adjustment: 100 mm NC axis, infinitely variable Spindle speed: 5,850 rpm Tool swing diameter max.: 210 mm 6th profile milling unit (grooving unit from above), in auxiliary stand Position: vertical right, operating from above Motor power: 3 kW Spindle diameter: 40 mm Tool clamping length: 40 mm Axial adjustment: 100 mm, 8 positions via pneumatic turret Radial adjustment: 80 mm, 8 positions via pneumatic turret Spindle speed: 5,850 rpm Tool swing diameter max.: 180 mm 7th profiling spindle (grooving unit from below) in auxiliary stand Position: horizontal bottom Motor power: 3 kW Spindle diameter: 40 mm Tool clamping length: 125 mm Axial adjustment: 100 mm NC axis, infinitely variable Radial adjustment: 100 mm NC axis, infinitely variable Spindle speed: 5,850 rpm Tool swing diameter max.: 200 mm MACHINE DETAILS Slotting spindle: 2 pcs. Number of milling units: 7 pcs. Control: Weinig PC-Nexus Weinig Unicontrol 12 INCLUDING used window tooling OERTLI IV 68, IV 78 wood and wood-aluminium Additional features can be found in the attached document! Note: The machine has already been properly dismantled.

Year of construction: 1998, condition: used, Technical details: profile width: 50 mm work height max.: 950 mm interface: RS 232 Pinout Window profile processing machine for materials such as plastic, aluminum and wooden windows in a continuous process. The materials are conveyed by a pneumatic transport and clamping system. The system consists of two work stations (machines), an electrical control cabinet, and a control panel and transport units. As well as columns with transport system vibrator, chip transport unit and column with receipt printer. Our photos are first taken from the location and then further pictures are how the plant is stored in our stock ready for transport. Workstation no. 1 (machine 1): -sawing station with saw blade Ø 400 x 4,5mm -drilling unit with clamping cartridge (vertical upwards) -drilling unit with clamping cartridge (hotizontal) Ndedeu Ibuwepfx Agzof -Boring with clamping cartridge (vertical down) -twin drilling unit with clamping cartridge (vertical down) -45° drilling unit with clamping cartridge (upwards) Working station no. 2 (machine 2): -drilling unit with clamping cartridge (vertical upwards) -milling spindle horizontal with 11 side milling cutters -Drilling unit with clamping cartridge (vertical down) -Drilling unit with clamping cartridge (vertical upwards) -Drilling unit with clamping cartridge horizontal 2 transport units: motor driven -LxWxH: 5.650 x 2.400 x 1.000mm -track width 1.980mm 2 pieces transport units: motor driven -LxWxH: 2.150 x 2.750 x 1.050mm -track width 2.300mm *

Condition: used, maximum load weight: 29,850 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2024, next inspection (TÜV): 01/2026, loading space length: 8,500 mm, loading space width: 2,450 mm, loading space height: 1,395 mm, loading space volume: 29 m³, total width: 2,550 mm, total height: 3,000 mm, Equipment: ABS, Kässbohrer K.SKA B / 26-12 / 27 | Aluminium box tipper | First registered 01/2024 | 29 m³ | Excellent condition ---Technical Data--- First registration: 01/2024 * Year of manufacture: 2024 * Manufacturer: Kässbohrer * Model: K.SKA B / 26-12 / 27 * Body type: Aluminium box tipper, tiltable * Volume: 29 m³ * Gross weight: 39,000 kg * Unladen weight: approx. 5,265 kg * Payload: approx. 33,700 kg * Registration country: Germany ---Dimensions--- * Overall length: 9,080 mm * Overall width: 2,550 mm * Cargo length: 7,800 mm * Internal body height: 1,395 mm * Superstructure length: 8,500 mm * Fifth wheel height: 1,220 mm ---Chassis & Equipment--- * 3 BPW air suspension axles with disc brakes, 9 t capacity each * Automatic lift axle (EBS controlled, operable from the driver’s cab) * WABCO EBS 2S/2M with RSS stability control * Safety braking system to prevent accidental driving with raised body * 6x tyres 385/65 R22.5 M+S on steel rims (ET 120) * Mechanical aluminium supports (24,000 kg load capacity) * ASPÖCK Europoint III LED lighting system, 24V, ADR compliant * Aluminium side underrun protection according to ECE R73 * Folding rear underrun protection according to ECE R58.3 ---Body--- * High-strength aluminium body, suitable for construction site use * Side walls: 40 mm thick, 500 mm profile width * Floor plate: 6 mm aluminium, wear-resistant * Front wall and tailgate: 5 mm aluminium, reinforced design * Tailgate with mud-tight rubber seal and safety lock * Manual roll tarpaulin system (680 g/m², temperature resistant from -40°C to +70°C) * Steel access platform and control station * HYVA 5-stage cylinder, controllable via pneumatic lever * Body-Fix system for vibration and noise reduction ---Paintwork--- * Chassis: MB 7350 Novagrau * Body: RAL 9006 White Aluminium * Tarpaulin: RAL 9006 White Aluminium * Kässbohrer logos on side walls and tailgate ---Condition--- Nedsxwf Rgspfx Agzjdf * First registration 01/2024, excellent condition * Accident-free, immediately available * Ideal for construction site use and bulk transport For further information, please feel free to contact us.

Condition: used, Year of construction: 2001, functionality: fully functional, Two pneumatically lowered heads with 330 mm diameter saws. Left head – stationary, right – movable. Cutting heads of P models are tilted with the help of pneumatic cylinders. Has a “two-hand” control mode and an instant saw stop device. General characteristics 1 Motors 2 pcs. x 1.1 kW, 380 V 2 Number of revolutions 3765 rpm 3 Saw diameter 330 x 30 mm Ndjdpfx Aexytnljgzof 4 Saw head tilt 90º- 45º 5 Rotation -45º- 90º- 45º 6 Max. cutting length 3335 mm, 7 Min. cutting length (all models) when heads are turned inward 45º 420 mm 8 Min. cutting length when heads cut at an angle of 90º 365 mm 9 Max. dimensions of cut workpieces when cutting 45º (HxW) 90 x 100 mm 10 Max. dimensions of cut workpieces when cutting 90º (HxW) 90 x 145 mm

Condition: excellent (used), axle configuration: 3 axles, first registration: 06/2016, total length: 8,910 mm, total width: 2,550 mm, total height: 3,700 mm, suspension: air, wheelbase: 6,110 mm, Year of construction: 2016, Steering and lift axle = Further Information = Axle configuration Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg; Tire tread left: 55%; Tire tread right: 55% Rear axle 2: Max. axle load: 9,000 kg; Tire tread left: 55%; Tire tread right: 55% Rear axle 3: Max. axle load: 9,000 kg; Steering; Tire tread left: 55%; Tire tread right: 55% Weights Unladen weight: 5,780 kg Payload: 33,220 kg Gross vehicle weight: 39,000 kg Condition Technical condition: very good Visual condition: very good Further information Please contact Maarten Busser or Niels Busser for further information. Nsdpfx Aow Hm Ihogzsdf

Condition: new, Year of construction: 2024, operating hours: 50 h, functionality: fully functional, total width: 1,750 mm, total length: 7,500 mm, total height: 1,700 mm, input voltage: 380 V, overall weight: 3,200 kg, Manufacturer: Boton Condition: New Product Description: The high-quality window patching machine from Boton delivers a precise, fast, and reliable solution for window patching on folding cartons—including challenging designs such as corner windows. Thanks to its well-thought-out construction and modern control system, this machine is ideal for operations that demand the highest standards of quality and efficiency. Features: ✅ Standard and Corner Window Processing Flawless patching even for 'corner windows'—for maximum manufacturing flexibility. ✅ Precise Positioning Automatic centering system and adjustable adhesive technology ensure consistently high processing quality. ✅ Efficient and Time-Saving High degree of automation for short cycle times and optimal integration into existing production lines. ✅ User-Friendly Controls Intuitive touch-screen control panel—simple adjustment and rapid changeover for different window sizes and types. ✅ Robust Construction Industrial-grade components and durable materials for continuous operation. Technical Specifications Max paper size: 950x780 mm Min paper size: 150x130 mm Paper thickness: 1 - 6 mm Window size (max): 380x300 mm Ndjdewlr Evspfx Agzsf Window size (min): 50x50 mm Speed: 8,000 pcs/h

Condition: used, Tenoning spindle 1 St Number of milling agregates 4 St. Spindle diameter 50 mm Control Weinig, PC-Nexus Weinig Unicontrol 10 CNC - Spindles radially and axially CNC-controlled ----- The machine was factory overhauled by Weinig in 2024. The control system was also upgraded to a Siemens S 7 677 C, with a new membrane panel "Touch". With the following machining units: Crosscut saw ----- with laser alignment light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 Axially adjustable via NC axis Radial pneumatic adjustment to 8 positions for edge rounding from above Unit from below for edge rounding ----- Axially adjustable with crosscut saw Tenon and slotting spindle ----- Motor power 15 kW Spindle diameter 50 mm Spindle speed 2,925 rpm Tool travel radius min. 380, max. 400 mm Tool clamping length 640 mm Axially adjustable CNC axis Axially adjustable travel 580 mm Adjustment speed 100 mm/sec. 1. Profile spindle (up- and down-rotation) ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis 2. Profile spindle Nsdpjxpi Dujfx Agzodf ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis Profile milling unit horizontally mounted on top ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 9,000 rpm Pneumatically adjustable to 8 axial and radial positions Profile milling unit vertically mounted on the right side Machine end ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 5,850 rpm Pneumatic adjustment to 8 axial and radial positions Additional accessories ----- CNC-controlled length stop, mounted on the slotting table for lengths up to 3,500 mm, including a positioned cross-cutting saw integrated into the control system. Studio window device, pivots 60° on both sides Double-part package with automatic separation and transfer Synchronization device with automatic window rebating Rebating carriage for rebating small sash widths Air conditioning unit in the control cabinet PC control NEXUS Automatic turning system Slat conveyor, including conveyor belt for returning the workpieces to the operator (Technical specifications according to the manufacturer - without guarantee).

Year of construction: 2015, condition: ready for operation (used), A variety of semi-automatic and automatic window production machines is available. 1) Selecta BSS, year of construction: 1994, machine dimensions X/Y/Z: approx. 800mm/500mm/1200mm, weight: approx. 50kg. 2) Pneumatic press Urban, year of construction: 2011, operating pressure: 0.8MPa, air consumption: 4l/stroke, stroke: 20mm, machine dimensions X/Y/Z: approx. 850mm/850mm/1200mm, weight: approx. 130kg. 3) Pneumatic slot milling machine Hoffmann PU2-VH, year of construction: 2002, machine dimensions X/Y/Z: approx. 800mm/1200mm/1400mm, weight: approx. 200kg. 5) Selecta FC 106, year of construction: 1994, machine dimensions X/Y/Z: approx. 1000mm/800mm/1550mm, weight: approx. 50kg. 6) Wood and aluminum punching machine Batimet FOM, year of construction: 2004, machine dimensions X/Y/Z: approx. 1000mm/1100mm/1500mm, weight: approx. 60kg. 7) MLA M7 GLF 100, year of construction: 2015, power: 1.1kW, operating pressure: 7bar, machine dimensions X/Y/Z: approx. 750mm/850mm/1200mm, weight: approx. 50kg. 8) Machine dimensions X/Y/Z: approx. 400mm/400mm/1250mm, weight: approx. 50kg. 9) Wood and aluminum miter saw Hoffmann MS-35, year of construction: 2003, power: 2x18kW, machine dimensions X/Y/Z: approx. 1200mm/800mm/1500mm, weight: approx. 200kg. An on-site inspection is possible. Individual sale possible. Nodpfx Agoucw Tiszjdf

Condition: excellent (used), CNC Woodworking Center. Njdpfx Aowmxkhogzjdf

Year of construction: 2008, condition: used, I am offering for sale a complete set of 3 fully operational Schüco machines, perfect for aluminium profile processing (windows, doors, facades). All machines are in good working condition and ready for immediate use. ✅ Schüco PDG SET (2008) Type: Double mitre saw Motor speed: 2800 rpm Saw blade diameter: 500 mm Weight: 1,300 kg Manufacturer: F.O.M. INDUSTRIE s.r.l (Italy) Serial no.: C2021519 ✅ Schüco PBX AL (02/2008) Type: CNC machining center for aluminium profiles Weight: 3,450 kg Nodpfxjwz Rc Ee Agzjdf Manufacturer: BJM Ingenieurbüro Maschinenbau GmbH (Germany) Serial no.: 7866 ✅ Schüco PBA 3250 (08/2006) Type: Multi-spindle drilling machine / machining center Weight: 1,620 kg Manufacturer: BJM Ingenieurbüro Maschinenbau GmbH (Germany) Serial no.: 1952 🔧 Condition: All machines fully functional and regularly maintained Machines can be seen under power on site Ready for immediate delivery Export documents and VAT invoice available