Used Window Manufacturing Plant for sale (42,833)

Condition: used, Tenoning spindle 1 Stk. Number of milling agregates 5 St. Spindle diameter 50 mm Weinig Unicontrol 12 with radial and axial NC spindles, VARIO table, and milling carriage ..... Machine still in operation available for viewing! Optionally available with used tools and window design software for data transfer to the Unicontrol 12! Technical Data Summary (Please inquire about any additional accessories included) ..... Crosscut Saw ..... > Electronic crosscut saw, continuously adjustable horizontally > Number of tools: 1 > Spindle speed: 3,000 - 6,000 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment light for detecting the saw cut > Axial adjustment range: 150 mm, electronically continuously adjustable NC axis > Radial pneumatic adjustment range: 8 positions, e.g., for edge rounding from above Rounding Unit ..... > Position: horizontal, below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Tool clamping length: 25 mm > Spindle speed: 9,000 rpm > Tool diameter: max. 130 mm > Axial adjustment range mechanically coupled to the cross-cut saw. > Radial adjustment pneumatically controlled on/off Electronic length stop ..... > Length 4,100 mm 1. Tenon and slot spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm NC axis, continuously variable > Spindle speed: 2,800 rpm > Tool diameter: max. 400 mm > Follow-up counter, the entire clamping length is countered Transfer belt ..... For transferring parts to the longitudinal processing area, including double part separation before the infeed of the longitudinal processing area. 1. Profiling spindle (up- and down-axis rotation) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range: 350 mm, continuously variable NC axis > Radial adjustment range: 80 mm, continuously variable NC axis > Spindle speed: 6000 rpm > Minimum tool travel circle: 140 mm > Maximum tool travel circle: 232 mm > 2 feed rollers, pneumatically controlled axially opposite the spindle, 8 positions 2. Profiling unit (grooving unit from above) ..... > Position: horizontal, top > Motor power: 3.7 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment range: 30 mm 8 positions > Radial travel 125 mm, 8-station turret > Spindle speed: 9,000 rpm > Maximum tool travel: 130 mm 3rd profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial travel 350 mm, continuously variable NC axis > Radial travel 80 mm, continuously variable NC axis Podpfxsxr Rbge Adyjrc > Spindle speed: 6,000 rpm > Minimum tool travel: 140 mm > Maxi...

Condition: good (used), Year of construction: 1999, PCI -NF MEMBRANE FILTRATION PLANT Item: M-2199-PCI-NF Plant Prodpfshqhw Ijx Adysc This plant is membrane filtration plant used for remove water and / or very low molecular weight substances from liquid dairy products. The low molecular weight substances that are typically removed with NF membranes are monovalent ions such as K ions and Na ions. With APV Rannie-High Press Pump Good condition, Not used last two years!. Year of Production: 1999. Dimension: L 4.000 MM W 1200 mm H 1900 mm Press: Medium pressure 20 bar Retentat flow: 1200 l/h

Condition: used, Bleach & Fabric Softener Raw Material Intake & Production Plant Psdoxr Am Ispfx Adysrc 132,000 tonnes per year maximum bleach production capacity 27,000 tonnes per year maximum fabric softener production capacity Raw material reception & tank farm storage 36x Carlier and FIPP 50m3 composite vertical silos 150m3 sodium hypochlorite composite vertical silo Alliance Inox Industrie 49,500L stainless steel vertical silo Including pumps, pipework, instrumentation, hot water, softened water tanks and water treatment plant Product mixing facility Sirech Hostier 1,600L stainless steel premixing tank 3x Alfa Laval 11,500L stainless steel vertical mixing tanks 3x Alliance Inox Industrie 25,000L stainless steel vertical product holding tanks 6x Barriquand plate heat exchangers Pumps, pipework, manifolds & instrumentation throughout Chilled water system with CIAT chiller, chilled water tank & Barriquand plate heat exchanger Thick bleach production system including 2x composite tanks

Condition: used, Year of construction: 1970, sheet width 170 mm plate thickness 0 mm number of rolls 0 weight of the machine ca. 0,1 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++ Prjdsd N Spmepfx Adysc

Condition: used, Double-deck horizontal screen Type: B-256-T Predpfxjxrnrio Adyoc Screen area: 1,300 x 4,000 mm with base frame, springs, and spring supports

Condition: good (used), Small sandblasting system Internal dimensions 1.2 x 1.2 x 0.6 m (L x W x H) Connection pressure: 8 bar with extraction, loading table and spare parts (see pictures) Prodpfoxr Az Eox Adyoc

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm 1 used Weinig Unicontrol 6 window system ----- Manufacturer's description: For the production of individual parts, elements, and small series. Prodpow I Ea Defx Adyjc Spindle arrangement: One cross-cutting saw, one single-sided tenoning and slotting spindle, one right-hand profiling spindle, one tenoning and slotting spindle, and profiling spindle suitable for holding multiple tools stacked on top of each other, with pneumatic spindle movement. Slotting table with motorized table movement and automatic transfer to the continuous, chainless rubber roller feed of the profiling unit. Feed height adjustment manually. Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifying glass for frame or sash external dimensions. Tool positions (longitudinal and transverse machining) controlled via selector switch on the control panel. Technical Specifications ----- Crosscut Saw ----- Number of Tools: 1 Spindle Speed: 2,800 rpm Spindle Diameter: 40 mm Max. Tool Diameter: 350 mm Motor: 3 kW Mortise and Slot Spindle ----- Number of Tools: 3/4 pcs. for wood thicknesses IV 68 - IV 92 Spindle Speed: 3,500 rpm Spindle Diameter: 50 mm Tool Clamping Length: 320 mm Max. Tool Diameter: 320 mm Motor: 11 kW Profile Spindle ----- Number of Tools: 3/4 pcs. for wood thicknesses IV 68 - IV 92 Spindle Speed: 6,000 rpm Spindle Diameter: 50 mm Tool clamping length 320 mm Max. tool diameter 232 mm Motor 11 kW Special equipment: Synchronous spindle ----- Pneumatically timed forward/backward for tear-free rerouting of window sashes, frames, and doors. Spindle diameter 50 mm, 4 kW Tool clamping length 120 mm, zero tool diameter 112-140 mm Max. tool diameter 232 mm, spindle speed 6000 rpm Motor boost for synchronous spindle from 4 kW to 7.5 kW Screen control for 99 window types. One type can contain up to 8 different parts, each with 2 end profiles and 2 longitudinal profiles. Production options: single parts, double parts, frame-by-frame, series, rerouting. Data entry via keyboard with integrated operator guidance and error diagnostics. 1 Grooving spindle from above ----- Motor power: 2.2 kW Speed: 6000 rpm Spindle diameter: 40 mm, with 10 x 4 mm key Clamping length: 13 mm Clamping length: 40 mm Axial stroke, 2 positions Radial stroke, 2 positions Max. tool diameter: 130 mm Grooving spindle motor boost from 2.2 to 3 kW 1 Fitting milling unit, right: ----- For milling fitting grooves in the circumferential milling pass or for grooving in the longitudinal profile. Pneumatic horizontal movement with selector switch on the control panel. Motor power: 2.2 kW Speed: 6000 rpm Spindle diameter: 40 mm Clamping height: 125 mm Tool cutting radius: min. 140 mm, max. 180 mm Home position below table level: 10 mm Special design of the fittings milling machine: Clamping length 150 mm Axial stroke 80 mm, 3 positions 3 tools Radial cycle, 2 positions Motor booster for the hinge milling spindle from 2.2 to 3 kW Hinge milling spindle for 230 mm tool diameters in and above the table Electric height adjustment of the feed with selector switch on the co...

Condition: used, input voltage: 400 V, total width: 1,400 mm, total length: 650 mm, total height: 1,650 mm, DGUV certified until: 12/2026, Pietroberto Model: GRA/SP Mobile machine Connection 400V, 1.0 kW, 16A-CEE plug Dimensions: 1400 x 650 x 1650 mm, WxDxH Used machine Many more bakery machines in stock! Prsdpfx Adovktgyoyoc

Year of construction: 2024, operating hours: 100 h, condition: used, Serial number: 5xxxx Please contact ATS Norway for more information Please provide reference number upon request: 19395 Specifications: - 2024 model Predpfx Adjvgx Iueyoc - Hours: approx. 100 - Weight: 14,860 kg - Good lines - Comes with extra cloths - Undercarriage (see pictures) - Watch video - Ready for delivery Description: 2024 Portafill MR-5 sights with extra cloths. The cloths have a value of NOK 20,000. Only 75 hours. Ready for delivery. Hours: 100 Own weight: 14860 Total Weight: 14860 Model: MR-5 Sikteverk m/ ekstra duker

Condition: used, Year of construction: 1991, Year 1991 Prsdpohy T Nksfx Adysc max. load 450 gut +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), Year of construction: 2011, TOP TOWER 2000 asphalt mixing plant including: Ermont drying drum + CBS burner + filter and under-filter hopper + mixer. Year: 2011. Capacity: 200 tons/hour. The control cabin is missing. Prjdpfx Adsxpm Ttsyec

Condition: used, Used 5.9 MW Wartsila Vasa 18V32DF dual fuel cogeneration plant built in 1998 with ABB HSG 900 LS8 generator. Plant includes: Psdpjw U A I Ejfx Adyjrc - Wartsila VASA 18V32DF engine. This is a turbo-charged, intercooled four stroke gas engine with direct pilot fuel injection with the following specifications: Vee configuration, 18 cylinders, 320mm cylinder bore, 350mm stroke, 750 rpm, 2 inlet valves/cylinder, 2 outlet valves/cylinder, clockwise rotation and nominal output of 5901 kWm. - ABB HSG 900 LS8 generator. This is a self-cooled, 3-phase, brushless, synchronous, two bearing type generator with the following specifications: 7235 kVA, 0.8 power factor, 11000 V, 380 A, 50 Hz, 750 RPM, 900 RPM, insulation class F, IP21 protection and IEC34 standard.

Condition: used, Year of construction: 1998, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm 1 GUBISCH – CENTROMAT CW 2 ----- Manufacturer description: ----- For window and door production, with 50 mm spindle diameter in longitudinal profiling. With the following processing stations and options: - Slotting machine on one side for straight and angled connections Milling machine for longitudinal profiling - Rebating operation with synchronous milling unit and automatic plunge. Pivoting frame support up to 650 mm - Central control 1.0 cross-cut saw automatically plunges from above ----- Motor power, including motor brake: 3.0 kW Spindle speed: 2,800 rpm. Cutting circle diameter: 350 mm diameter Spindle diameter: 30 mm diameter Clamping flange, 1 driver 6 mm diameter TK 42, 120 mm diameter Pneumatic vertical stroke: 100 mm Pneumatic horizontal stroke: 160 mm against 2 manually adjustable 6-way turret stops Chip extraction hood with extraction nozzle 100 mm diameter 2.0 slot unit ----- Motor power, including motor brake: 9.2 kW Spindle speed: 3,800 rpm Flight circle diameter: 320 mm diameter Prjdpfxew I Eawj Adyec Spindle diameter: 50 mm diameter Usable spindle length: 320 mm Pneumatic vertical stroke fixed: 2 x 100 mm Suitable for 3 tool sets of 100 mm each Zero height: 10 mm Chip extraction hood with extraction nozzle: 160 mm diameter 3.0 Slotting table ----- Table height above floor 920 mm Feed for 4 speeds freely adjustable: - 1. Milling, slanting window and typing speed can be set in the table (approx. 7 m/min.) - 2. Sawing speed approx. 7 m/min. (can be set on the device) - 3. Transfer speed approx. 10 m/min. (can be set on the device) - 4. Return speed/without processing approx. 25 m/min. (can be set on the device) - Motor power, including motor brake 0.37 kW Workpiece clamping pneumatic Pendulum pressure shoes Workpiece clamping pneumatic 1 clamping cylinder with 2 additional pressure shoes 3.1 Counter wood device Counter wood changer with 2-way automatic change and then with manual. Rotation of 180 degrees, 2 further counters possible, which then also counter in automatic mode 3.2 Length stop ----- - Stop system with 3 scales for - a) outside frame - b) outside sash upright - c) outside sash crosswise Adjustment manually - Length with attachable extension 3000 mm - for sloped windows, pivotable +/- 60 degrees 3.3 Angle transfer - automatic via vertically clocked feed roller in the milling feed 4.0 Milling machine For longitudinal profiling and rebating of windows/doors with the following units: ----- 4.1 First profile milling unit ----- - Counter-rotation - Synchronous rotation with automatic plunge can be used for rebating - Motor power including motor brake: 9.2 kW - Spindle speed: 6000 rpm. - Cutting circle diameter: 240 mm max. - Spindles adjustable for zero diameter 140 mm max. - of tools 112 mm min. - Zero height: 10 mm - Spindle diameter: 50 mm diameter - Spindle usable length: 320 mm - Vertical stroke pneumatically fixed, - suitable for 4 tool sets of 80 mm each, 3 x 80 mm - Horizontal stroke pneumatic: 80 mm - Chip extraction with extraction nozzle diameter 140 mm 4...

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, usable tank capacity: 100 l, input voltage: 400 V, tank capacity: 100 l, total width: 820 mm, total length: 1,050 mm, total height: 1,690 mm, NEW NEW Fermentolevain Fermento NEW NEW System for the preparation and preservation of liquid sourdough With Dual Care System for optimal flavor Control of fermentation and preservation phases With integrated cooling system easy-Touch control panel Mixing time and speed adjustable Stainless steel construction Removable mixing tool With overflow sensor and alarm buzzer Discharge height 440 mm 2 agitators, double lid Scrapers for bottom and sides for superior quality Tank capacity 100/125 kg Built-in frame heating and cooling coil Cooling capacity approx. 6°C decrease per hour DGUV V3 tested exclusively by us Connection: 400V / 50Hz / 2.1kW, 16A CEE plug Dimensions: 820 x 1050 x 1690 mm (W x D x H) New machine & SAB tested With warranty + spare parts service Optional: Built-in scale Water connection with hand shower Cleaning cycle Maintenance contract Pedpot Sckmjfx Adysrc Service package More top bakery machines in stock!

Year of construction: 1971, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 20724 Prsdowrl Ukspfx Adyjc Specifications: 1971 model Delivers 4 fractions Complete, but without engine Original spare tire Ready for delivery

Condition: used, Year of construction: 2018, operating hours: 3,297 h, functionality: unexamined, Basic system equipment features: Feed belt: • Highly wear-resistant, forged special chain • Feed belt width: 1,700 mm • Feed belt length: 4,700 mm Predpfxsxc Ibfe Adyoc Hydraulic unit: • Feed roller and feed belt each driven separately with their own drive and gearbox. The feed belt and feed roller speeds are infinitely adjustable. Overload protection via speed monitoring and reversing mechanism. • Hydraulic tank capacity: 220 liters. Feed: • The feed roller is hydraulically driven, mounted in a pendulum bearing, and guided by two rack bars. • Feed opening: approx. 660 mm height x 1,700 mm width. Hammermill: • 46 hammers, hammer width: 80 mm • Individual hammer tips replaceable • Hammermill width: 1,700 mm • Rotor diameter: 999 mm • Rotor speed: 1,000 rpm Engine: • SCANIA turbo diesel engine, output of 478 kW, complying with the applicable Euro emission standard Drive: • Direct drive via 8 V-belts Hopper dimensions: • Hopper opening length: 4,800 mm • Hopper opening width: 2,400 mm Throughput capacity: • 200–300 m³/h or more, depending on material

Year of construction: 2020, operating hours: 2,850 h, condition: used, CE mark: yes Serial number: TRX0169HDGLAxxxx Please contact ATS Norway for more information Please provide reference number upon request: 21106 Predpfx Adjw N Diasysc Specifications : - 2020 model - Hours: 2850 - Capacity: 8m - Weight: 33,500 kg - CAT C4.4 engine - Gathering point small ring - Remote control with cable - Chassis (see pictures) - Good bands (see pictures) - Delivery by appointment Description : 2020 Terex Finlay 693 sight works. The work is used every other week so the number of hours can increase somewhat. It may come with wearing parts (cloths, rollers, bearings, rubber) for an additional price. Delivery by appointment   Hours: 2850 Own weight: 33500 Total Weight: 33500 CE: Yes Model: 693+ sikteverk.

Operating hours: 3,352 h, condition: used, CE mark: yes Serial number: 233xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20518 Specifications: - 3352 Hours - Feed box - Hanging screen - Conveyor - Raise and lower function (hydraulic) - Underroller - starts and runs - Ready to deliver Description: We have a Powerscreen MK2 screen for sale. Everything works as it should according to the owner. Services have been taken by the owner continuously. Ready to deliver Hours: 3352 Psdpowphuzofx Adyjrc Own weight: CE: Yes Model: MK2

Year of construction: 2013, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 19926 2013 model Hour unknown Prjdpfov U R Ivjx Adyjc Own weight: Model: TSH 7203-38

Year of construction: 2012, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 19931 2012 model Pjdpfxov U Sy Tj Adyerc Hour unknown Stationary Own weight: Model: Nordberg GP 300

Year of construction: 2009, condition: used, Please contact ATS Norway for more information Pjdev U Sa Tspfx Adysrc Please provide reference number upon request: 19930 2009 model King pin, 2 axle chassis Hour unknown Own weight: 40000 Model: Metso Nordberg NW 353 FS sikt

Year of construction: 2016, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 19932 2016 model Predpsv U Sgmefx Adysc Hour unknown Stationary Own weight: Model: DP 2016

Year of construction: 1991, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 19963 1991 modell Timer ukjent Own weight: Psdpfx Adev U R Nmeyjrc Model: Lokomo A 132 grovsikt

Year of construction: 1974, condition: used, Serial number: 13511xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21156 We have a 1974 Svedala Arbr sorting plant for sale. The work is working, but it is old. Some wear and tear can be expected. Pjdpfx Adew R Npneyorc Buy in the condition it is in. Ready for delivery.

Year of construction: 2008, operating hours: 6,262 h, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21162 Specifications: Psdpfxjw Sc Ugj Adyorc 2008 model 6262 hours Feed hopper Main conveyor Side conveyors Maintenance performed by owner Includes extra rollers and screens One side conveyor is missing the motor Ready for delivery Description:For sale: 2008 Keestrack Frontier screener with two side conveyors.One of the side conveyors is missing the motor.All maintenance has been carried out regularly by the owner.Extra rollers and screens are included.The machine is ready for delivery. Hours: 6262